Sponsor-Packages.Pdf

Total Page：16

File Type：pdf, Size：1020Kb

Sponsoring Diamond Platinum Gold Silver Bronze Package LACC + IGW 28.000 USD 21.000 USD 14.000 USD 7.000 USD 3.500 USD Package price LACC 20.000 USD 15.000 USD 10.000 USD 5.000 USD 2.500 USD Package price IGW 15.000 USD 11.250 USD 7.500 USD 3.750 USD 1.875 USD Rooms included at the conference venue (Hilton hotel) during the 6 4 3 rooms 50% discount 2 rooms 40% discount 1 room 30% discount conference days (3 nights for each conference or 6 for both) Complementary registration 6 4 3 2 1 Exclusive Company exhibition Double exclusive exhibition space Exhibition Space Exhibition Space Exhibiton Space Become a member of the LACC Industrial Advisory Board Sponsor acknowledment during welcome speech Opportunity to moderate a session and/or for a short (max. 15 min) talk Promotion poster near the speakers podium Possibility to present a short promotion video (max. 3 min.) on the conference website Promotion possibility via the Conference App Enclosed in conference bag and/or Enclosed in conference bag and/or Enclosed in conference Enclosed in conference Enclosed in conference Promotion material logo on conference bag logo on conference bag bag bag bag Logo plus link to a specified company site on the website Logo on conference announcements, Listed as sponsor conference promotion material Promotion during the breaks between sessions 5 slides 4 slides 2 slides Logo Logo Advertising space in the programme leaflet / book of abstracts 1 full page 1 full page 1/2 page Logo Listed as sponsor Possibility to sponsor and present special award(s) in the name of your organisation (amount of the award not included in the package) Talk in CIMMYT day (lab equipment demo or seminar) (2,000 USD additional) Other packages available: welcome reception for LACC (10,000 USD) or IGW (5,000); gala dinner for LACC (15,000 USD) or IGW (6,500 USD); coffee breaks for LACC (3,000 USD) or IGW (1,500 USD); lunch for LACC (5,000 USD) or IGW (2,000 USD); sponsor the entire CIMMYT visit day (15,000 USD). .

Copy Link

Recommended publications

Treatise on Combined Metalworking Techniques: Forged Elements and Chased Raised Shapes Bonnie Gallagher
Rochester Institute of Technology RIT Scholar Works Theses Thesis/Dissertation Collections 1972 Treatise on combined metalworking techniques: forged elements and chased raised shapes Bonnie Gallagher Follow this and additional works at: http://scholarworks.rit.edu/theses Recommended Citation Gallagher, Bonnie, "Treatise on combined metalworking techniques: forged elements and chased raised shapes" (1972). Thesis. Rochester Institute of Technology. Accessed from This Thesis is brought to you for free and open access by the Thesis/Dissertation Collections at RIT Scholar Works. It has been accepted for inclusion in Theses by an authorized administrator of RIT Scholar Works. For more information, please contact [email protected]. TREATISE ON COMBINED METALWORKING TECHNIQUES i FORGED ELEMENTS AND CHASED RAISED SHAPES TREATISE ON. COMBINED METALWORKING TECHNIQUES t FORGED ELEMENTS AND CHASED RAISED SHAPES BONNIE JEANNE GALLAGHER CANDIDATE FOR THE MASTER OF FINE ARTS IN THE COLLEGE OF FINE AND APPLIED ARTS OF THE ROCHESTER INSTITUTE OF TECHNOLOGY AUGUST ( 1972 ADVISOR: HANS CHRISTENSEN t " ^ <bV DEDICATION FORM MUST GIVE FORTH THE SPIRIT FORM IS THE MANNER IN WHICH THE SPIRIT IS EXPRESSED ELIEL SAARINAN IN MEMORY OF MY FATHER, WHO LONGED FOR HIS CHILDREN TO HAVE THE OPPORTUNITY TO HAVE THE EDUCATION HE NEVER HAD THE FORTUNE TO OBTAIN. vi PREFACE Although the processes of raising, forging, and chasing of metal have been covered in most technical books, to date there is no major source which deals with the functional and aesthetic requirements
[Show full text]
Repoussé Work for Amateurs
rf Bi oN? ^ ^ iTION av op OCT i 3 f943 2 MAY 8 1933 DEC 3 1938 MAY 6 id i 28 dec j o m? Digitized by the Internet Archive in 2011 with funding from Boston Public Library http://www.archive.org/details/repoussworkforamOOhasl GROUP OF LEAVES. Repousse Work for Amateurs. : REPOUSSE WORK FOR AMATEURS: BEING THE ART OF ORNAMENTING THIN METAL WITH RAISED FIGURES. tfjLd*- 6 By L. L. HASLOPE. ILLUSTRATED. LONDON L. UPCOTT GILL, 170, STRAND, W.C, 1887. PRINTED BY A. BRADLEY, 170, STRAND, LONDON. 3W PREFACE. " JjJjtfN these days, when of making books there is no end," ^*^ and every description of work, whether professional or amateur, has a literature of its own, it is strange that scarcely anything should have been written on the fascinating arts of Chasing and Repousse Work. It is true that a few articles have appeared in various periodicals on the subject, but with scarcely an exception they treated only of Working on Wood, and the directions given were generally crude and imperfect. This is the more surprising when we consider how fashionable Repousse Work has become of late years, both here and in America; indeed, in the latter country, "Do you pound brass ? " is said to be a very common question. I have written the following pages in the hope that they might, in some measure, supply a want, and prove of service to my brother amateurs. It has been hinted to me that some of my chapters are rather "advanced;" in other words, that I have gone farther than amateurs are likely to follow me.
[Show full text]
Silver Cas # 7440-22-4
SILVER CAS # 7440-22-4 Agency for Toxic Substances and Disease Registry ToxFAQs July 1999 This fact sheet answers the most frequently asked health questions (FAQs) about silver. For more information, call the ATSDR Information Center at 1-888-422-8737. This fact sheet is one in a series of summaries about hazardous substances and their health effects. It’s important you understand this information because this substance may harm you. The effects of exposure to any hazardous substance depend on the dose, the duration, how you are exposed, personal traits and habits, and whether other chemicals are present. HIGHLIGHTS: Silver is an element found naturally in the environment. At very high levels, it may cause argyria, a blue-gray discoloration of the skin and other organs. This chemical has been found in at least 27 of the 1,177 National Priorities List sites identified by the Environmental Protection Agency (EPA). What is silver? o It may be released into water from photographic process ing. (Pronounced s≥l vír) o Rain may wash silver out of soil into the groundwater. Silver is a naturally occurring element. It is found in the o Silver does not appear to concentrate to a significant environment combined with other elements such as sulfide, extent in aquatic animals. chloride, and nitrate. Pure silver is “silver” colored, but silver nitrate and silver chloride are powdery white and silver sul fide and silver oxide are dark-gray to black. Silver is often How might I be exposed to silver? found as a by-product during the retrieval of copper, lead, o Breathing low levels in air.
[Show full text]
Metals and Metal Products Tariff Schedules of the United States
251 SCHEDULE 6. - METALS AND METAL PRODUCTS TARIFF SCHEDULES OF THE UNITED STATES SCHEDULE 6. - METALS AND METAL PRODUCTS 252 Part 1 - Metal-Bearing Ores and Other Metal-Bearing Schedule 6 headnotes: Materials 1, This schedule does not cover — Part 2 Metals, Their Alloys, and Their Basic Shapes and Forms (II chemical elements (except thorium and uranium) and isotopes which are usefully radioactive (see A. Precious Metals part I3B of schedule 4); B. Iron or Steel (II) the alkali metals. I.e., cesium, lithium, potas C. Copper sium, rubidium, and sodium (see part 2A of sched D. Aluminum ule 4); or E. Nickel (lii) certain articles and parts thereof, of metal, F. Tin provided for in schedule 7 and elsewhere. G. Lead 2. For the purposes of the tariff schedules, unless the H. Zinc context requires otherwise — J. Beryllium, Columbium, Germanium, Hafnium, (a) the term "precious metal" embraces gold, silver, Indium, Magnesium, Molybdenum, Rhenium, platinum and other metals of the platinum group (iridium, Tantalum, Titanium, Tungsten, Uranium, osmium, palladium, rhodium, and ruthenium), and precious- and Zirconium metaI a Iloys; K, Other Base Metals (b) the term "base metal" embraces aluminum, antimony, arsenic, barium, beryllium, bismuth, boron, cadmium, calcium, chromium, cobalt, columbium, copper, gallium, germanium, Part 3 Metal Products hafnium, indium, iron, lead, magnesium, manganese, mercury, A. Metallic Containers molybdenum, nickel, rhenium, the rare-earth metals (Including B. Wire Cordage; Wire Screen, Netting and scandium and yttrium), selenium, silicon, strontium, tantalum, Fencing; Bale Ties tellurium, thallium, thorium, tin, titanium, tungsten, urani C. Metal Leaf and FoU; Metallics um, vanadium, zinc, and zirconium, and base-metal alloys; D, Nails, Screws, Bolts, and Other Fasteners; (c) the term "meta I" embraces precious metals, base Locks, Builders' Hardware; Furniture, metals, and their alloys; and Luggage, and Saddlery Hardware (d) in determining which of two or more equally specific provisions for articles "of iron or steel", "of copper", E.
[Show full text]
Testing Gold Platinum Silver.Qxp
PROCEDURES FOR TESTING GOLD, PLATINUM AND SILVER To test for the karat value of gold, platinum and silver, you will need the following materials and tools: • Black acid testing stone that is washed thoroughly with water prior to each test. • Acids. • Gold testing needles with gold tips - used for comparison with test pieces. Testing for 10K, 12K, 14K Scratch the gold piece to be tested on the stone. Next to this position, scratch the appropriate needle (10, 12 or 14K). Place a drop of the appropriate acid on the stone where the gold was rubbed off. If the gold is the same karat or higher, the color of the scratch mark for the gold piece will appear the same as the mark from the needle. If that gold piece is a lower karat, the scratched deposit will become fainter and eventually disappear. Testing for 18K Scratch the test piece on the stone and apply 18K acid. Any gold that is less than 18K will disappear in less than 30 seconds. Gold that remains on the stone is 18K or higher. Testing for 20K and 24K Scratch the gold piece on the stone. Next, scratch any item of know karat (coin or needle) on the stone. Apply one drop of acid to area. The material that starts to disappear has the lower karat. Testing for Platinum Scratch the test item on the stone and apply one drop of acid to the application on the stone. If the material is platinum, it should keep its white, bright color. White Gold The same procedure for platinum can be used for 18K white gold.
[Show full text]
Antibacterial Property and Biocompatibility of Silver, Copper, and Zinc in Titanium Dioxide Layers Incorporated by One-Step Micro-Arc Oxidation: a Review
antibiotics Review Antibacterial Property and Biocompatibility of Silver, Copper, and Zinc in Titanium Dioxide Layers Incorporated by One-Step Micro-Arc Oxidation: A Review Masaya Shimabukuro Department of Biomaterials, Faculty of Dental Science, Kyushu University, 3-1-1 Maidashi, Higashi-ku, Fukuoka 812-8582, Japan; [email protected]; Tel.: +81-92-642-6346 Received: 3 October 2020; Accepted: 19 October 2020; Published: 20 October 2020 Abstract: Titanium (Ti) and its alloys are commonly used in medical devices. However, biomaterial-associated infections such as peri-implantitis and prosthetic joint infections are devastating and threatening complications for patients, dentists, and orthopedists and are easily developed on titanium surfaces. Therefore, this review focuses on the formation of biofilms on implant surfaces, which is the main cause of infections, and one-step micro-arc oxidation (MAO) as a coating technology that can be expected to prevent infections due to the implant. Many researchers have provided sufficient data to prove the efficacy of MAO for preventing the initial stages of biofilm formation on implant surfaces. Silver (Ag), copper (Cu), and zinc (Zn) are well used and are incorporated into the Ti surface by MAO. In this review, the antibacterial properties, cytotoxicity, and durability of these elements on the Ti surface incorporated by one-step MAO will be summarized. This review is aimed at enhancing the importance of the quantitative control of Ag, Cu, and Zn for their use in implant surfaces and the significance of the biodegradation behavior of these elements for the development of antibacterial properties. Keywords: titanium; biofilm; infection; micro-arc oxidation; silver; copper; zinc; antibacterial properties; coating; implant 1.
[Show full text]
The Platinum/Palladium Process
9 The Platinum/Palladium Process OVERVIEW AND EXPECTATIONS In the majority of the classes and workshops that I’ve taught over the years, “the platinum/palladium process” is the answer that surfaces first when I ask the question, “What process do you want to learn the most?” In this chapter you will learn how, and, as in previous chapters, I begin with a little history. Then you will learn the chemistry and sequence of the various stages to a finished print. This chapter gives you alternatives to traditional platinum/palladium chemistry and provides you with a simple sensitizer “drop chart” that is based on the type of negative you are working with, rather than the print you would like to make. I also provide the beginnings of a trouble-shooting list to assist in hunting down problems that may be showing up in your work. Finally, you’ll get some brief alternative ideas for combining platinum/palladium with other techniques such as Van Dyke and gum bichromate. A LITTLE HISTORY Like most refined non-silver and alternative photographic processes, the art of platinum/palladium printing was developed in pieces over time by a number of dedicated artists and scientists. In 1830, Ferdinand Gehlen recorded the action and effects of light on platinum chloride, noting that UV light would alter the color of platinum salts and cause the ferric salts to precipitate out into a ferrous state. At around the same time, Johann Wolfgang Dobereiner (1780–1849) observed the decomposition of ferric oxalate on exposure to UV light and scientifically defined its sensitivity.
[Show full text]
Rhodium Products
Rhodium products Rhodium is one of the of six elements in the platinum group, which consists of platinum, palladium, rhodium, osmium, iridium and ruthenium. Often found with deposits of platinum and commonly obtained from the mining and refining of platinum, it is considered to be the rarest and most valuable precious metal, more valuable than gold or silver. Rhodium is a silver-white metallic element with high melting and boiling points. It is highly reflective and resistant to corrosion and oxidation, which is why it is also classified as a noble metal. It was discovered in 1803 by English chemist William Hyde Wollaston shortly after his discovery of palladium. Wollaston extracted rhodium from a piece of platinum ore that he had obtained from South America. Rhodium was named for the rose-red color of its salts, after the Greek word “rhodon” which means rose. Rarely used by itself, rhodium metal is almost always used as an alloy. We offer a broad, diverse catalog of rhodium products which are also available in bulk quantities and pack sizes that can be customized to your requirements. Application highlights: The Alfa Aesar™ portfolio of rhodium products can be used in a wide range of applications, from chemistry research to manufacturing and industry, from emission control and electrical applications to jewelry. Rhodium in chemistry Rhodium is used in research and industrial laboratories primarily as a catalyst. It is preferable to the other platinum group catalysts in the reduction of nitrogen oxides to nitrogen and oxygen. Rhodium is also used to catalyze the reduction of benzene to cyclohexane as well as the addition of hydrosilanes to double bonds, an important step in the manufacture of certain silicone rubbers.
[Show full text]
Advertising Platinum Jewelry
FTC FACTS for Business Advertising Platinum Jewelry ftc.gov The Federal Trade Commission’s (FTC’s) Jewelry Guides describe how to accurately mark and advertise the platinum content of the jewelry you market or sell. Platinum jewelry can be alloyed with other metals: either precious platinum group metals (PGMs) — iridium, palladium, ruthenium, rhodium, and osmium — or non-precious base metals like copper and cobalt. In recent years, manufacturers have alloyed some platinum jewelry with a larger percentage of base metals. Recent revisions to the FTC’s Jewelry Guides address the marking of jewelry made of platinum and non-precious metal alloys and when disclosures are appropriate. When Disclosures Should Be Made Product descriptions should not be misleading, and they should disclose material information to jewelry buyers. If the platinum/base metal-alloyed item you are selling does not have the properties of products that are almost pure platinum or have a very high percentage of platinum, you should disclose that to prospective buyers. They may want to know about the value of the product as well as its durability, luster, density, scratch resistance, tarnish resistance, its ability to be resized or repaired, how well it retains precious metal over time, and whether it’s hypoallergenic. You may claim your product has these properties only if you have competent and reliable scientific evidence that your product — that has been alloyed with 15 to 50 percent non-precious or base metals — doesn’t differ in a material way from a product that is 85 percent or more pure platinum. Facts for Business Terms Used in Advertising • Jewelry that has 850 parts per thousand pure platinum — meaning that it is 85 percent pure • Any item that is less than 500 parts per platinum and 15 percent other metals — may be thousand pure platinum should not be marked referred to as “traditional platinum.” The other or described as platinum even if you modify the metals can include either PGMs or non-precious term by adding the piece’s platinum content in base metals.
[Show full text]
1 an Investigation of the Mechanical and Physical Properties of Copper
An Investigation of the Mechanical and Physical Properties of Copper-Silver Alloys and the Use of These Alloys in Pre-Columbian America by Shannon L. Taylor Submitted to the Department of Materials Science and Engineering in Partial Fulfillment of the Requirements for the Degree of Bachelor of Science at the Massachusetts Institute of Technology June 2013 © Massachusetts Institute of Technology. All rights reserved. Signature of Author: ____________________________________________________________ Department of Materials Science and Engineering May 3, 2013 Certified by: ___________________________________________________________________ Heather Lechtman Professor of Archaeology and Ancient Technology Thesis Supervisor Accepted by: __________________________________________________________________ Jeffrey Grossman Carl Richard Soderberg Associate Professor of Power Engineering Chair, Undergraduate Committee 1 An Investigation of the Mechanical and Physical Properties of Copper-Silver Alloys and the Use of These Alloys in Pre-Columbian America by Shannon L. Taylor Submitted to the Department of Materials Science and Engineering on May 3, 2013 in Partial Fulfillment of the Requirements for the Degree of Bachelor of Science in Archaeology and Materials ABSTRACT In both the Andean zone of South America and in Mesoamerica, copper-silver alloys were important in the production of thin, silver-colored sheet metal artifacts. This thesis examines the mechanical and physical properties of the copper-silver alloy system that are important to understanding why copper-silver alloys became central to the metallurgies that developed among prehistoric societies of the Andean zone and Western Mexico. These properties include their range of malleability, the microstructures behind their toughness, and the recrystallization and annealing behaviors that led to their development of silver-enriched surfaces. To determine these properties, a series of cold rolling, cold hammering, and annealing experiments were performed on five Cu-Ag alloys and pure copper.
[Show full text]
Effects of Surface Treatments on Stainless Steel 316 Exposed to Potable Water Containing Silver Disinfectant
49th International Conference on Environmental Systems ICES-2019-273 7-11 July 2019, Boston, Massachusetts Effects of Surface Treatments on Stainless Steel 316 Exposed to Potable Water Containing Silver Disinfectant Wenyan Li1, Jerry W. Buhrow2, Angie M. Diaz3, Tesia D. Irwin4, and Luz M. Calle5 NASA, Kennedy Space Center, FL, 32899 Michael R. Callahan 6 NASA Johnson Space Center, Houston, TX, 77058 Silver has been selected as the forward disinfectant candidate for potable water systems in future space exploration missions. To develop a reliable antibacterial system that requires minimal maintenance, it is necessary to address relevant challenges to preclude problems for future missions. One such challenge is silver depletion in potable water systems. When in contact with various materials, silver ions can be easily reduced to silver metal or form insoluble compounds. The same chemical properties that make ionic silver a powerful antimicrobial agent also result in its quick inactivation or depletion in various environments. Different metal surface treatments, such as thermal oxidation and electropolishing, have been investigated for their effectiveness in reducing silver disinfectant depletion in potable water. However, their effects on the metal surface microstructure and chemical resistance have not often been included in the studies. This paper reports the effects of surface treatments on stainless steel 316 (SS316) exposed to potable water containing silver ion as a disinfectant. Early experimental results showed that thermal oxidation, when compared with electropolishing, resulted in a thicker oxide layer but compromised the corrosion resistance of SS316. Nomenclature AgF = silver fluoride DI = deionized I2 = iodine ISS = International Space Station KSC = Kennedy Space Center NASA = National Aeronautics and Space Administration SEM = scanning electron microscopy SS = stainless steel S/V = surface to volume XPS = X-ray photon spectroscopy I.
[Show full text]
Understanding the Astrophysical Origin of Silver, Palladium and Other Neutron-Capture Elements
Understanding the astrophysical origin of silver, palladium and other neutron-capture elements Camilla Juul Hansen München 2010 Understanding the astrophysical origin of silver, palladium and other neutron-capture elements Camilla Juul Hansen Dissertation an der Fakultät für Physik der Ludwig–Maximilians–Universität München vorgelegt von Camilla Juul Hansen aus Lillehammer, Norwegen München, den 20/12/2010 Erstgutachter: Achim Weiss Zweitgutachter: Joseph Mohr Tag der mündlichen Prüfung: 22 März 2011 Contents 1 Introduction 1 1.1 Evolutionoftheformationprocesses . ..... 2 1.2 Neutron-capture processes: The historical perspective............ 5 1.3 Features and description of the neutron-capture processes.......... 7 1.4 Whatisknownfromobservations? . .. 9 1.5 Why study palladium and silver? . .. 15 1.6 Abiggerpicture................................. 16 2 Data - Sample and Data Reduction 19 2.1 Compositionofthesample . 19 2.1.1 Samplebiases .............................. 21 2.2 Datareduction ................................. 22 2.2.1 Fromrawtoreducedspectra. 22 2.2.2 IRAF versus UVES pipeline . 25 2.3 Merging ..................................... 26 2.3.1 Radialvelocityshift .......................... 27 3 Stellar Parameters 29 3.1 Methods for determining stellar parameters . ........ 29 3.2 Temperature................................... 30 3.2.1 Comparingtemperaturescales . 32 3.3 Gravity ..................................... 34 3.4 Metallicity.................................... 35 3.5 Microturbulence velocity, ξ ..........................
[Show full text]