www.isaso.com

Choice of Security Professionals Worldwide

Product Catalog Contents

Outdoor Radar Detector RB-100F ------02 RB-100F with RF-001 ------03

Perimeter Tower Series TW-001 ------04

Photoelectric Beam Detector PB-200L ------05 MPB Series ------06 PB-D Series ------07 PB-SA Series ------08 PB-S Series ------09

Indoor IoT System Rayhome ------10 Passive Infrared Detector PM-4010P / PM-4110P ------12 PA-4610P ------13 PA-0112 /PA-0112DD ------14

Others Other Detectors ------15

Magnetic Contacts ------16

Accessories ------17 Company Introduction

KMT is a 100% private Korean capital-owned company active in designing, production, and global sales of high-quality intrusion alarm detectors.

Both hardware and firmware are based on innovative technological solutions, developed by KMT’s expert engineering staff on the in-house R&D center.

SASO products have won international acclaim among distributors, installers, surveillance companies and end users, including Tyco, Honeywell, Samsung, etc. The authorized distribution network is constituted by national and international partners from over twenty countries, the latter resulting in dynamic export growth.

Partners Worldwide

MAJOR PARTNERS SAMSUNG, TYCO, HONEYWELL, COMMAX and OVER 40 COMPANIES.

EXPORT TO USA, ITALY, JAPAN, CHINA, RUSSIA, SLOVAKIA, HUNGARY, SOUTH AFRICA, ISRAEL, TURKEY, SPAIN, TAIWAN, AUSTRALIA, GREECE, BULGARIA, EGYPT, COSTA RICA, BRASIL, URUGUAY, MALAYSIA, VIETNAM, THAILAND, OVER 30 COUNTRIES Radar Detector

• FMCW (Frequency Modulated Continuous Wave) Radar • Low False alarm rate in a harch external environments RB-100F (fog, rain, etc.) through High Gain Narrow Beam & Dynamic Filtering • Provides the exact detection point by Doppler Algorithm • Conducted reliability Tests and approved related certifications • Sensitivities can be varied to find out the best options applied to a variety of places • Specialized in perimeter security as it can be integrated with Video Management System (VMS) to support storing videos

Specifications Model RB-100F Operation Method FMCW (Frequency Modulated Continuous Wave) Detection Distance Walking: 3 ~ 100m / Crawling: 7 ~ 100m Horizontal Width 6m Vertical Width 10m Distance Unit 2m Frequency A: 24.06 ~ 24.14GHz B: 24.16 ~ 24.24GHz Response Time 50 ~ 500ms (7 ~ 0.6m/s) Supply Voltage DC10 ~ 25V Current Max. 135mA Interface RS485 Output Dry contact relay output 1C (N.O/N.C) Contact action 2±0.5 sec, Contact Capacity 30V (AC/DC) 1A or less Installation Height 0.9m IP Rating IP65 Operating Temperature -40°C ~ +70°C Option Pole Bracket (80 ~ 100mm)

02 Radar Detector

• FMCW (Frequency Modulated Continuous Wave) Radar • Low False alarm rate in a harch external environments RB-100F (fog, rain, etc.) through High Gain Narrow Beam & Dynamic Filtering with RF-001 • Provides the exact detection point by Doppler Algorithm • Conducted reliability Tests and approved related certifications • Sensitivities can be varied to find out the best options applied to a variety of places • Specialized in perimeter security as it can be integrated with Video Management System (VMS) to support storing videos • If you install RB-100F with the reflector RF-001, it detects only the beam that is reflected by the reflector so the vertical and horizontal widths are reduced to less than 1m, making it suitable for us in narrow spaces.

Specifications Model RB-100F + RF-001 Operation Method FMCW (Frequency Modulated Continuous Wave) Detection Distance Walking: 0 ~ 100m / Crawling: 3 ~ 98m Horizontal Width 1m Vertical Width 1m Distance Unit 2m (except for 0 ~ 10m and 90 ~ 100m) Frequency A: 24.055 ~ 24.095GHz B: 24.105 ~ 24.145GHz C: 24.155-24.195GHz D: 24.205-24.245GHz Response Time 50 ~ 500ms (7 ~ 0.6m/s) Supply Voltage DC10 ~ 25V Current Max. 135mA Interface RS485 Output Dry contact relay output 1C (N.O/N.C) Contact action 2±0.5 sec, Contact Capacity 30V (AC/DC) 1A or less Installation Height 0.5 ~ 0.7m IP Rating IP65 Operating Temperature -40°C ~ +70°C Option Pole Bracket (80 ~ 100mm)

03 Perimeter Tower Series

• Available in 1.0m ~ 3.0m / One side or Double side Protection • UV Resistant Polycarbonate Cover TW-001 • Extruded Anodized Aluminum Tower • Anti-sabotage Tamper Switch • Compatible with all SASO Beam Detectors • Optional Brackets and Accessories Available

Equipped with PB-200L Equipped with PB-SD Series

Applications

04 Photoelectric Beam Detector

• Digital Quad Beam Covers Up to 200m • Environmental Disqualification Output More than 40 seconds of alarm output triggers environmental PB-200L disqualification function • IP Construction of 55 with Quad Tamper Function • Power Status Check by LED • Setting Notification by Tone Indicator • Anti-dew / Anti-insect Cover “Breathing Hole” allows moisture and air to exit the cover while preventing the penetration of water and/or insects • Alarm Memory Up to 24 hours

Specifications Model PB-200L Protection Range Outdoor : 200m / Indoor : 400m Number of Channels 4 Channels Detection system Simultaneous blocking of 4 beams Response Time 50ms ~ 700ms Supply Voltage DC 10 ~ 25V (Polarity) Current Max. 100mA (Rx : 62mA, Tx : 42mA) Tamper Output Dry contact relay output N/C (Receiver only) Alarm Output Dry contact relay output 1C, Contact action : Detection time 2±0.5sec Contact capacity : 30V(AC/DC), 1A or less Beam Adjustment Horizontal : ±95°, Vertical : ±10° Temperature -20°C ~ 60°C Environmental Output Outdoor / Indoor wall or window frame IP Rating IP 55 Dimensions 460 x 115 x 120mm Functions Environmental DQ, Power Status Check, Tone Indicator, Alarm Memory, Quad Tamper Accessory Pole Bracket

05 Photoelectric Beam Detector

• Multi Application of 2 ~ 8 Beams Available in 3 Models for Complete Perimeter Security in Style MPB Series • Waterproof Construction of IP 55 Perfectly Designed for Weather Resistance in Aluminum with Special Sealing • Selectable 4-Channel Beam Frequency • External Light Protection • Slim & Modern Design

Specifications Model MPB-30D2 MPB-30D4 MPB-30D4II Number of Beams 2 Beams 4 Beams Dual 4 Beams Protection Range Indoor / Outdoor 15m Indoor / Outdoor 20m Response Time 100ms ~ 300ms 100ms ~ 200ms Supply Voltage DC 10 ~ 25V (Polarity) DC 9.6 ~ 14.4V (Polarity) Current Max. 100mA Max. 120mA Max. 125mA Tamper Output Dry contact relay output N/C (Receiver only) Alarm Output Dry contact relay output 1C, Contact action : Detection time 2±0.5sec Contact capacity : 30V(AC/DC), 1A or less Beam Adjustment 190 (±95°) Wide angle adjustment Temperature -20°C ~ 60°C Mounting site Outdoor / Indoor wall or Window frame IP Rating IP 55 Dimensions 440 x 34 x 35mm 832 x 34 x 35mm 1,440 x 39 x 45mm Material Aluminum, PC resin, ABA resin

06 Photoelectric Beam Detector

• Advanced Weather Protection & Durability Nationally Certified Cover Guarantees Protection Against Frost and Series Dew with 10 year durability PB-D • Selectable 4-Channel Beam Frequency Each Channel can be Assigned to Different Signals for More Reliable Performance and Multiple Installation to Cover Extended Area • External Light Protection Globally Certified Cover Filters the Penetration of External Light (Sunlight, Car Head Light, etc), Protecting the Sensitivity of Sensor • Beam Alignment and Sensitivity Control Built-in Viewfinder and Monitor Jack Enable Accurate Beam Alignment and Sensitivity Adjustment

Specifications Model PB-30D PB-60D PB-100D Protection Range 30m 60m 100m Detection System Simultaneous blocking of 2 beams Number of Channels 4 Channels Response Time 50 ~ 700ms Supply Voltage DC 10V ~ 25V (Polarity) Current Max. 72mA Tamper Output Dry contact relay output N/C (Receiver only) Alarm Output Dry contact relay output 1C, Contact action : Detection time 2±0.5sec Contact capacity : 30V(AC/DC), 1A or less Beam Adjustment Horizontal : ±95°, Vertical : ±10° Temperature -20°C ~ 60°C IP Rating IP 54 Dimensions 73 x 177 x 84mm Option Pole Bracket (2pcs/set), Transmitter tamper switch

07 Photoelectric Beam Detector

• Advanced Weather Protection & Durability Nationally Cerified Cover Guarantees Protection Against Frost and Series Dew with 10 year durability PB-SA • External Light Protection Globally Certified Cover Filters the Penetration of External Light (Sunlight, Car Head Light, etc), Protecting the Sensitivity of Sensor • Beam Alignment and Sensitivity Control Built-in Viewfinder and Monitor Jack Enable Accurate Beam Alignment and Sensitivity Adjustment • Wide Angle Adjustment Horizontal : ±95° / Vertical : ±10°

Specifications Model PB-30SA PB-60SA PB-100SA Protection Range Outdoor 30m Outdoor 60m Outdoor 100m Indoor 60m Indoor 120m Indoor 200m Current Max. 46mA Max. 61mA Max. 88mA Detection System Simultaneous blocking of 2 beams Response Time 50 ~ 700ms Supply Voltage DC 10V ~ 25V (Polarity) Tamper Output Dry contact relay output N/C (Receiver only) Alarm Output Dry contact relay output 1C, Contact action : Detection time 2±0.5sec Contact capacity : 30V(AC/DC), 1A or less Beam Adjustment Horizontal : ±95°, Vertical : ±10° Temperature -20°C ~ 60°C IP Rating IP 55 Dimensions 72 x 167 x 78mm Option Pole Bracket (2pcs/set), Transmitter tamper switch

08 Photoelectric Beam Detector

• Advanced Weather Protection & Durability Nationally Cerified Cover Guarantees Protection Against Frost and Series Dew with 10 year durability PB-S • External light Protection Globally Certified Cover Filters the Penetration of External Light (Sunlight, Car Head Light, etc), Protecting the Sensitivity of Sensor • Beam Alignment and Sensitivity Control Built-in Viewfinder and Monitor Jack Enable Accurate Beam Alignment and Senstivity Adjustment • Wide angle Adjustment Horizontal : ±95° / Vertical : ±10°

Specifications Model PB-30S PB-60S Protection Range Outdoor 30m / Indoor 60m Outdoor 60m / Indoor 120m

Current Max. 57mA Detection System Simultaneous blocking of 2 beams Response Time 50 ~ 700ms Supply Voltage DC 10V ~ 25V (Non-Polarity) Tamper Output Dry contact relay output N/C (Receiver only) Alarm Output Dry contact relay output 1C, Contact action : Detection time 2±0.5sec Contact capacity : 30V(AC/DC), 1A or less Temperature -20°C ~ 60°C Beam Adjustment Horizontal : ±95°, Vertical : ±10° IP Rating IP 54 Dimensions 63 x 163 x 75mm Option Pole Bracket (2pcs/set), Transmitter tamper switch

09 IoT System

• It is an intelligent network service that enables simple control of home with smartphones through devices RayHome connected with IoT environment. • Simple installation, setup and synchronization • Can be customized with different IoT devices in need of each customer • Easy to manage the IoT system with mobile application • Multiple member of family or co-workers can share the IoT sensing status and alarm • Alerts your emergency situation by sending emergency messages to your acquaintances • You can watch the real-time video images of your home remotely with the camera that can move left, right, top and bottom

Doors Open Weather detects doors open e.g. can keep the conditions front door, windows the best by intergrated with weather information to maintain health care

Motion Detection On/Off detects motions of human can control power body and alarms when on/off by connecting intrusion happens with mobile phone

Video Fire detection Connected with alarms when high smartphone. temperature has been Communicate in real detected time.

10 IoT System

Wireless PIR Sensor Model WPA-4010P Protocols FM, Z-wave and ZigBee Battery 3V Battery (CR123A) Current 15uA Max / Transmitting : 55mA Max. Detection Range Wide Angle : 10m Alarm LED(Red) Blinking at warming up / LED on at alarm Temperature -10°C - +50°C PET Immunity Under 10 kg Mounting Site Indoor (Ceiling / Wall) Dimensions 102 x 64 x 47 mm / 129g Option Bracket (B-4001), Battery (CR123A)

Wireless Magnetic Contacts Model WMS-30 Protocols FM, Z-wave and ZigBee Battery 3V Battery (CR123A) Current 10uA Max / Transmitting : Max. 55mA Alarm LED (Red) Blinking at warming up / LED on at alarm Temperature -10°C - +50°C Mounting Site Indoor Dimensions 33x77x28 mm / 48g

Smart Hub Model WH-001 Standard IEEE802.11b/g/n (1T1R mode) 11b : 17±1dBm@11Mbps Wi-fi Transmission 11g :14±1dBm@54Mbps Protocol output 80211n : HT20), 12±1dBm, 80211n : (HT40), 12±1dBm Z-wave Frequency 920.9MHz, 921.7MHz, 923.1MHz 900MHz Frequency 917.1 - 923.3MHz Dimensions 132 x 135 x 66(mm) Weight 200g Temperature -10°C - +50°C Voltage DC5V / 2A Adaptor Current Average 5V / 300mA

IP Camera Model WRE-001Z Sensor 1/4” CMOS 1.0 megapixel 720p Image H.264 compression format, 3 video stream output Rotation Horizontal: 355° Vertical: 120° IR mode IR 10m Dimensions 92 x 116 x 112(mm) Weight 254g Poltage DC5V/2A Adaptor

11 Passive Infrared Detector

• Microwave and Infrared PIR Detector • Stereoscopic Alert with 10m / 84° Detection PM-4010P • Advanced Optics and Zone Compositions Offers Reliable PET Immunity Under 10Kg • Sensitivity Adjustment using Pulse Count PM-4110P • Anti-Masking Function (PM-4110P)

Specifications Model PM-4010P PM-4110P Detection System Passive infrared motion & Microwave Microwave Frequency 10.525 GHz Protection Range Wide angle : 10m (84°) Zone 37 Pairs (74 zones) Current MAX. 44mA MAX. 48mA Supply Voltage DC 8 ~ 18VDC(Polarity) Tamper Output Dry contact relay 1a or 1b Alarm Output Dry contact relay output 1C, Contact action : Detection time 2±0.5sec Contact capacity : 30V(AC/DC), 0.2A or less Temperature -10°C ~ 50°C Pet Immunity Under 10 kg Mounting Site Indoor Dimensions 131 x 64 x 47mm Option Bracket (B-4001) Function - Anti-masking

12 Passive Infrared Detector

• Auto Sensitivity Adjustment Function Sensitivity of the Sensor is Automatically Adjusted Based on PA-4610P Surrounding Temperature • Advanced PET Immunity Precise Alignment with 72 Zones to ensure 10kg Pet Immunity • Slim Design with Wide Angle(84°) • Selectable Alarm Contact (N/C, N/O) • Compact Design

Specifications Model PA-4610P Detection System Passive infrared motion Protection Range Wide angle : 10m (84°) Zone 37 Pairs (74 zones) Current MAX. 20mA Supply Voltage DC 8 ~ 18VDC(Polarity) Tamper Output Dry contact relay output 1a or 1b Alarm Output Dry contact relay output 1C, Contact action : Detection time 2±0.5sec Contact capacity : 30V(AC/DC), 0.2A or less Temperature -10°C ~ 50°C Pet Immunity Under 10 kg Mounting Site Indoor Dimensions 102 x 64 x 47mm Option Bracket (B-4001)

13 Passive Infrared Detector

• Auto Sensitivity Adjustment Function Sensitivity of the Sensor is Automatically Adjusted Based on PA-0112 Surrounding Temperature • Rear Side Detection (360° Rotable) • Selectable Alarm Contact (N/C, N/O) • Selectable Direction of Detection (PA-0112DD) PA-0112DD User Can Select the Direction of Detection

Specifications Model PA-0112 PA-0112DD Protection Range Wide angle : 10m (84°) Wide angle : 12m (13°) Zone 17 Pairs (34 zones) 22 Pairs (44 zones) Current MAX. 20mA MAX. 25mA Detection System Passive infrared motion Detecting Supply Voltage DC 8 ~ 18V(Polarity) Tamper Output Dry contact relay output 1a or 1b Alarm Output Dry contact relay output 1C, Contact action : Detection time 2±0.5sec Contact capacity : 30V(AC/DC), 0.2A or less Alarm LED Red LED : Blinking at warming up / Green LED : Blinking at warming up / LED on at alarm RED LED : alarm Temperature -10°C ~ 50°C Mounting Site Indoor (Ceiling) Dimensions ⏀131 x 48mm

14 Other Detectors

Class Break Detector

Model GS20A Detection Range Within 2M in redius / 1/4” thickness Type Resistance change method detecting Supply Voltage No power / Non polarity Temperature -10°C ~ 50°C Dimensions ⏀30 x 9 mm

Shock Detector

Model SH-10 Detection Range 4M in radius (Under 9.8N of shock) Contact Type C Type (COM, NC, NO) Supply Voltage DC 9.6 ~15V (Non polarity) Temperature -10°C ~ 50°C Dimensions 62 x 89 x 28 mm

Safe / ATM Detector

Model GS10N Detection Range 4M in radius (Under 9.8N of shock) Contact Type C Type (COM, NC, NO) Supply Voltage DC 9.6 ~15V (Non polarity) Temperature -10°C ~ 50°C Dimensions Sensor : 68 x 118 x 29 mm / Joint : 62 x 89 x 28 mm Bracket : 73 x 125 x 9 mm

Strobe Warning Light

Model HD-15 / HD-20 Supply Voltage DC 12V (polarity) Current 120mA Max. Temperature -20°C ~ 60°C Dimensions 139 x 75 x 72 mm / 167 x 96 x 36 mm

Emergency Switch

Model ES-001 / ES-003 Type Latch / Push Type Temperature -5°C ~ 50°C Alarm Output C (SPDT) Dimensions ⏀70 x 27 mm

15 Magnetic Contacts

Surface Mounted Magentic Contacts

Model MS-6 / MS-6F Model DS-30A/DS-25B/DS-25C Output Form N.C Output Form N.C / N.O/N.C, N.O Protection Range 30mm Protection Range 30mm / 25mm /25mm Dimensions 52 x 12 x 12mm Dimensions 65 x 14 x 14mm

Model MS-31 Model MS-38 Output Form N.C Output Form N.C Protection Range 20mm Protection Range 20mm Dimensions 64 x 19 x 13mm Dimensions 27 x 14 x 8mm

Model MS-40 Model MS-42 Output Form N.C Output Form N.C Protection Range 20mm Protection Range 20mm Dimensions 44 x 10 x 7mm Dimensions 50 x 14 x 12mm

Model MS-48 Model MS-52 Output Form N.C Output Form N.C Protection Range 25mm Protection Range 35mm Dimensions 66 x 13 x 13mm Dimensions 50 x 20 x 10mm

Model MS-56 Model MS-57 Output Form N.C Output Form N.C Protection Range 50mm Protection Range 35mm Dimensions 49 x 25 x 15mm Dimensions 60 x 25 x 10mm

Model MS-58 Model MS-59D Output Form N.C Output Form N.C Protection Range 50mm Protection Range 30mm Dimensions 106 x 16 x 16mm Dimensions 106 x 16 x 16mm

Recessed Mounted Magnetic Contacts

Model MS-33 Model MS-33H Output Form N.C Output Form N.C Protection Range 25mm Protection Range 25mm Dimensions ⏀10 x 10.8mm Dimensions ⏀9.5 x 22mm

Model MS-35 Model MS-36 Output Form N.C Output Form N.C Protection Range 25mm Protection Range 35mm Dimensions ⏀10 x 33mm Dimensions ⏀19 x 25mm

Model MS-26B Model MS-46 Output Form N.C Output Form N.C Protection Range 25mm Protection Range 25mm Dimensions ⏀19 x 9mm Dimensions ⏀8 x 29mm

16 Overhead / Roller Shutter Detector

Model MS-54 Model MS-55AL Output Form N.C Output Form N.C Protection Range 60±10mm Protection Range 60±10mm Dimensions Sensor:80 x 120 x 32mm Dimensions Sensor:106 x 38 x 10mm Magnet:100 x 30 x 5mm Magnet:106 x 16 x 16mm

Model MS-60 Model MS-65AL Output Form N.C Output Form N.C Protection Range 60±10mm Protection Range 60±10mm Dimensions Sensor:105 x 48 x 10mm Dimensions Sensor:88 x 38 x 5mm Magnet:88 x 20 x 20mm Magnet:88 x 42 x 35mm

Accessories For Photoelectric Beam Detector

Model : TW-001 Model : PB-B001 Model : PB-B002 Model : MPB-B001 - Photobeam Tower - PB Series Base Bracket - PB Series Pole Bracket - MPB Series Spacer - Available in 0.5m~2.0m (⏀38~44mm)

For Passive Infrared Detector

Model : B-4001 Model : B-4002 - PIR Bracket - PIR Bracket - Up to ±50° horizontal adjustment - Up to ±20° vertical adjustment

For Magnetic Contacts

Spacer Bracket(Glass Door) Bracket(Window) KMT Co., Ltd. 5F, 15, Sagimakgol-ro 150beon-gil, Jungwon-gu, Seongnam, Gyeonggi, Korea 13203 Tel: +82-31-789-0953 Fax: +82-31-789-0999 Email: [email protected] http://www.isaso.com