Solid-State Lighting R&D Plan June 2016
Solid-State Lighting R&D Plan June 2016 Prepared for: Solid-State Lighting Program Building Technologies Office Office of Energy Efficiency and Renewable Energy U.S. Department of Energy DOE/EE-1418 [This page has intentionally been left blank.] DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency, contractor, or subcontractor thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. This publication may be reproduced in whole or in part for educational or non-profit purposes without special permission from the copyright holder, provided acknowledgement of the source is made. The document should be referenced as: DOE SSL Program, "R&D Plan," edited by James Brodrick, Ph.D. Contributors Norman Bardsley Bardsley Consulting Monica Hansen LED Lighting Advisors Lisa Pattison SSLS, Inc. Morgan Pattison SSLS, Inc. Kelsey Stober Navigant Consulting, Inc. Victor Taylor Navigant Consulting, Inc. Jeffrey Tsao Sandia National Laboratories Mary Yamada Navigant Consulting, Inc.
[Show full text]