Hand Tool Identification

Total Page:16

File Type:pdf, Size:1020Kb

Hand Tool Identification HAND TOOL IDENTIFICATION Left click or use the Roller on the mouse to navigate To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. MEASURING TOOLS BENCH RULE TAPE MEASURE FOLDING EXTENTION LASER STEEL LONG TAPE RULE To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. SAWS HACK SAW COPING SAW BACK SAW RIP SAW CROSSCUT SAW To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. LAYOUT TOOLS T-BEVEL SPEED SQUARE TRY SQUARE FRAMING SQUARE COMBINATION SQUARE To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. LAYOUT TOOLS CONTOUR GAUGE INSIDE CALIPERS OUTSIDE CALIPERS CHALK LINE PLUM BOB To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. LEVELS LINE LEVEL TORPEDO LEVEL CARPENTERS, SPIRIT LEVEL LEVELS TRANSIT BUILDERS BUILDERS LEVEL, LEVEL TRIPOD, ROD PLANES BLOCK PLANE JACK PLANE SURFORM FASTENING TOOLS PHILLIPS SCRATCH AWL SCREWDRIVER EXTENSION PHILLIPS BIT TORQ BIT STANDARD SCREWDRIVER SQUARE BIT To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. HAMMERS CURVED-CLAW STRIAGHT-CLAW, HAMMER RIPPING HAMMER WOOD MALLET To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. CLAMPS SPRING “C” CLAMP QUICK GRIP CLAMP CLAMP WEB OR BAND CLAMP WOOD HAND BAR CLAMP SCREW CLAMP PLIERS NEEDLE NOSE PLERS SLIP JOINT PLIERS LOCKING PLIERS, LINESMAN PLIERS VISE GRIPS DIAGONAL CUTTERS AJUSTABLE SLIP GROOVE JOINT PLIERS, CHANNEL LOCKS To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. WRENCHES ADJUSTABLE OPEN END, ALLEN WRENCH CRESCENT SET OPEN END BOX END COMBINATION DRILLING TOOLS PADDLE, FLAT, TWIST DRILL, SPEED DRILL BIT BIT BRAD POINT BIT AUGER MASONARY BIT BIT To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. BORING TOOLS HOLE SAW FORSTNER BIT EXPANSIVE BIT HOLE CUTTER COUNTER SINK PLUG CUTTERS To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. MISCELLANOUS WOOD CHISEL NAIL SET DOWEL CENTERS DOWELING JIG CENTER PUNCH MISCELLANOUS CARPENTERS BRACE UTILITY KNIFE DRILL GAUGE CATS PAW To help protect your privacy, PowerPoint prevented this external picture from being automatically downloaded. To download and display this picture, click Options in the Message Bar, and then click Enable external content. MISCELLANOUS GLUE SCRAPER PUTTY KNIFE HANDY FILE FILE CARD THE END .
Recommended publications
  • Owner's Manual and Safety Instructions 2200W Electric Demolition Jack Hammer Chisel Bit Item: 61108-Xp
    2200W ELECTRIC DEMOLITION JACK HAMMER CHISEL BIT ITEM: 61108-XP OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER) FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. DO NOT allow persons to operate or assemble the product until they have read this manual and have developed a thorough understanding of how it works. DO NOT modify this product in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the product was designed.
    [Show full text]
  • TOOLS and EQUIPMENT Orthotic 561
    TOOLS AND EQUIPMENT Orthotic 561 Tools Shoe Stretchers............................562 Brannock Measuring Device..................562 Mixing Bowls ..............................562 Aluminum Cast Mandrels ....................562 Laminating Fixtures.........................563 Vises and Yates Clamps.................563-564 Measuring Devices .....................564-567 Hex Sets and Balldrivers.................567-569 Screw and Drill Gages ......................569 Cutting Nippers ............................570 Plastering Tools............................571 Shears and Scissors ....................571-572 Blades, Knives and Surforms .............572-575 Rivets, Punch Sets and Eyelets ...........576-579 Reamers .................................579 Needle Kit ................................579 Deburring Tool.............................579 Rout-A-Burr ...............................579 Precision Oiler.............................580 Countersinks ..............................580 Adjustable Bits.............................580 Tools Ball Set Tool . 580 Micro Torches and Heat Guns ............580-582 Cast Spreaders and Cutters ..............583-584 Alignment Fixtures .........................584 Benders and Contouring Iron .............584-585 Equipment Carvers, Cutters and Routers.............585-588 Sanding Accessories............ 589-591, 601-603 Sewing and Patching Machines ...............592 Drill Press ................................593 Band Saws . .594-595 Dust Collectors ........................596-597
    [Show full text]
  • Drill Bits 101 I've Used Dowels in a Variety of Woodworking Projects
    Drill Bits 101 I’ve used dowels in a variety of woodworking projects having bought myself a pretty decent doweling jig a few years ago. The jig itself came with a twist drill bit for each of the three dowel sizes. For my dowel joinery I often need to drill holes of two different depths; so sometimes it is handy to have two bits of the same diameter with stops set at the different depths. One day I inadvertently was using both a twist bit and a brad point bit and noticed very different results. For example, drilling into end grain was far more difficult with a brad point bit than with the twist bit. All of this got me wondering about the different types of woodworking drill bits. Hence my investigation into the family tree of woodworking drill bits. Note that many drill bits may be multi-purpose, but generally speaking there are different families of bits for plastic, metal(s), tile, and masonry, etc. The basic job of a drill bit of course is to stay centered and not wander, cut the wood to form a round hole, and eject the chips. Seems simple, but not so perhaps, which is why there are so many types of drill bits and even options on lips, lands, flutes, margins, and other design elements – details beyond the scope of Bevel Cut. Of all the types, the common twist drill, invented by Steven Morse in 1863 and covered in US Patent 38119 is the simplest. The V-angle of the tip can vary from 60 to 118 degrees, with the latter being most common in today’s hardware stores according to my own research.
    [Show full text]
  • New DEWALT® 20V MAX* 1/2" Mid-Range Impact Wrench
    Nov 01, 2017 12:35 EDT New DEWALT® 20V MAX* 1/2" Mid- Range Impact Wrench TOWSON, MD (November 1, 2017) – DEWALT announces two new 20V MAX* 1/2" Mid-Range Impact Wrenches (DCF894 and DCF894H). They are available in detent pin style for users who need maximum socket retention and hog ring style, for users who value quickly being able to change sockets. Each tool is ideal for use overhead or when space is constrained in applications that require high torque including plumbing, mechanical, concrete and masonry, automotive, steel erection, and elevator repair. At 3.48 lbs. (tool only) and 6.95" to the front of the anvil, the 20V MAX* 1/2" Mid-Range Impact Wrenches are compact yet deliver high-power and torque. Each tool achieves 330 ft.-lbs. of maximum torque, 0-3,100 impacts per minute, and no-load speeds from 0-900 and 0-2,000 RPM in two mode settings (low and high) designed for use in a wide variety of applications. These applications include threaded couplings, pipe flanges, wheel lugs, and concrete anchor setting, among others. The 20V MAX* 1/2" Mid-Range Impact Wrenches also features Precision Wrench™ Control which helps sense when a bolt is getting tight and pauses before impacting to help avoid over-torque. In reverse, Precision Wrench™ Control regulates how quickly a nut or bolt is removed, helping to prevent run-off. With an efficient brushless motor that provides increased efficiency and runtime over brushed units, the tool is a powerful cordless option. In addition, the Mid-Range Impact Wrench includes a variable speed trigger and LED light to help provide visibility in low light situations.
    [Show full text]
  • POWER TOOL SOLUTIONS for VEHICLE SERVICING Your Complete Tool Solution
    POWER TOOL SOLUTIONS FOR VEHICLE SERVICING YOUR COMPLETE TOOL SOLUTION 95 YEARS 95 YEARS OF DESIGN OF INNOVATION & MANUFACTURE From the beginning FACOM’s goal has been to listen to professionals to allow us to produce tools for them FACOM is internationally recognized as one of the best that would exceed their exacting requirements, while design and manufacturing brand in the industry. incorporating features that would make everyday tasks We manufacture to the highest quality standards and easier and safer. This fundamental philosophy is very design truly innovative professional hand and power much the driving force behind the Facom brand. tools for use across the world. Today, FACOM is Europe’s leading hand tool brand with This commitment is clearly evident by the number a range of over 9,000 products, including storage of personnel employed in our design teams, with over (trolleys, cabinets, benches, portable storage), standard 250 R&D engineers operating in 10 separate offices tools (wrenches, screwdrivers, pliers, hammers, air tools) dedicated to Facom product development. FACOM and specialist tools (automotive, electrical, aerospace) translates this R&D effort into efficient, high-quality to meet the needs of all professional tool users. products manufactured within 12 factories across Europe. 2 YOUR COMPLETE TOOL SOLUTION www.facom.com 3 IN-HOUSE POWER TOOL DESIGN LEADING PRODUCTS DEWALT® BATTERY PLUS A GREAT RANGE SWAP With over 95 years of automotive and industrial experience FACOM has developed a comprehensive power tools range to meet a vast range of job requirements, including: Our cordless tools now use the new premium lithium-ion battery platform.
    [Show full text]
  • 2010 Directory of Maine's Primary Wood Processors
    Maine State Library Digital Maine Forest Service Documents Maine Forest Service 9-14-2011 2010 Directory of Maine's Primary Wood Processors Maine Forest Service Forest Policy and Management Division Follow this and additional works at: https://digitalmaine.com/for_docs Recommended Citation Maine Forest Service, "2010 Directory of Maine's Primary Wood Processors" (2011). Forest Service Documents. 253. https://digitalmaine.com/for_docs/253 This Text is brought to you for free and open access by the Maine Forest Service at Digital Maine. It has been accepted for inclusion in Forest Service Documents by an authorized administrator of Digital Maine. For more information, please contact [email protected]. 2010 Directory of Maine’s Primary Wood Processors Robert J. Lilieholm, Peter R. Lammert, Greg R. Lord and Stacy N. Trosper Maine Forest Service Department of Conservation 22 State House Station Augusta, Maine 04333-0022 School of Forest Resources University of Maine Orono, Maine 04469-5755 December 2010 Table of Contents Introduction ......................................................................................................................... 1 Maine's Primary Wood Processors I. Stationary Sawmills ............................................................................................. 4 II. Portable Sawmills ............................................................................................. 67 III. Pulp and Paper Manufacturers ...................................................................... 106 IV. Stand-Alone
    [Show full text]
  • EM-Tec VS42 Universal Spring-Loaded Vise
    Technical Support Bulletin EM-Tec VS42 universal spring-loaded vise Products #12-000220 and #12-000320 Description The EM-Tec VS42 universal spring-loaded vise clamp includes two reversible vise plates and four dowel pins which fit into the top of the brass sliding bar. The maximum clamping capacity between the vise jaws is 42mm. Available with either the standard 3.2mm pin or an M4 threaded hole for mounting on the SEM sample stage. Operation Consider wearing gloves to avoid contamination. • To open the EM-Tec universal spring-loaded vise clamp, pull on the side of the brass sliding bars. • Place the sample between the vise jaws and gently release the sliding bars. • The tension on the 4 springs will hold the sample between the jaws in the middle of the holder. • The universal spring-loaded vice clamp acts as a centering vise. The aluminium vise plates are mounted on the brass sliding bars with brass M3 screws. The reversible vise jaws comprise a smooth side and a side with three small grooves. The grooves are more suitable for small round samples or to hold sample with a rough side. For awkwardly shaped samples, the vise jaws can be removed and 4 dowel pins can be inserted in the brass sliding bar to clamp the sample between the 4 dowel pins. Optional vise jaws are available for large round samples. By using longer M3 screws, the vise jaws can be stacked to double the jaw height from 12 to 24mm. For samples which are thinner than 1mm, an alternative vise type holder with a screw should be considered.
    [Show full text]
  • I Can Afford Only One Saw Right Now—So Which One Should I Buy, and What the Heck Is Your Hybrid-Cut
    “I Can Afford Only One Saw Right Now—So Which One Should I Buy, and What the Heck is Your Hybrid-Cut all About?” (How Bad Axe Tool Works Creates and Sharpens a Toothline) t’s early Thursday afternoon, and your PowerPoint presentation for the three o’clock meeting is done as it’s ever going to be. You’re surfing the web on your lunch break, sick of the virtual reality grind of Iyour job, and frustrated by those who answer to you or to whom you answer, because these people—coworkers and clients alike—do not share your ethos that excellence is simply not an option. Everywhere, it seems, people beg the question: “Who is John Galt?” They don’t actually say it, because they have no clue to begin with. They just live the question, day in, day out. You glance at your computer again, and shift your keyboard in place with renewed energy as you type out the URL for the website you want to visit. And you think about the project awaiting you for the weekend. You ‘ve been taking your frustrations out on the 4/4 quartersawn cherry and walnut and white oak you have carefully stockpiled at home in the basement workshop you’ve cobbled together over the past several months while developing a pronounced hand tool problem. And your lovely wife—commonly referred to as SWMBO (She Who Must be Obeyed) in Old Tool Galoot parlance—has confronted you about the amount of tools you’ve been snapping up on eBay with money you should have set aside to purchase the next iKea chest of drawers for your five-year-old.
    [Show full text]
  • Plain & Pre-Glued Dowel Pin FAQ How Do You Determine What Size
    Plain & Pre‐Glued Dowel Pin FAQ How do you determine what size dowel to use? The length of the dowel is generally determined by how much dowel can be inserted into the shortest member of the two piece joint. Twice this length is a common rule of thumb for determining dowel length. For example, if your shortest member is 1” thick and you know your safest drilling depth is 3/4”, then a 1‐1/2” dowel should be used. A 1‐1/2” length equates to two times the 3/4” thickness. The longer the dowel, the greater the holding strength. A similar procedure can be used to determine a proper diameter for the dowel. Generally, the diameter of the dowel should be no greater than half the thickness of the stock. For example, if the side panel is 1” thick, then you want to use a maximum 1/2” dowel. Incorrect hole depth or diameter create improper dowel joints by trapping glue or water at the bottom of the hole which is not properly distributed around the dowel. How deep should a dowel pin be inserted to be most effective? The longer the dowel, the greater the strength. The ideal joint has the dowel hole match the length of the dowel on both ends allowing the dowel to be inserted to the bottom of the hole. To avoid “blowout” on side panels, a small void of 2mm or 5/64”, is often left as insurance to collect excess glue or water in addition to allowing for variations in dowel length.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Principles of Hand Tool Selection
    Loss Prevention Reference Note Principles of Hand Tool Selection Repetitive use of manual This reference note gives some of the ergo- or powered hand tools is often nomic principles that can help guide you in a factor in carpal tunnel syn- selecting the proper manual or powered hand drome and other hand and wrist tools for repetitive tasks. disorders. While most tools are General Principles satisfactory for general purpose use, they may be entirely inappropriate for con- Before selecting any tool, you should first tinual or repetitive use in a production situation. ensure that the work area is ergonomically sound in For instance, a 15-pound hand tool may be per- terms of work surface height, adjustable seating, fectly acceptable for occasional use,1 but tools that acceptable manual handling requirements, etc. (See are used frequently or repetitively should weigh no LP 185, “Ergonomic Recommendations for Work- more than 4 pounds (1.75 kg).2 In addition, the place Design.”) Tilting the work surface or using working environment as a whole may also have fixtures to hold, tilt, or rotate the work can help to be evaluated and corrected. A properly designed minimize awkward wrist motions and simplify hand tool used in an awkward posture will not tool selection. solve the problem. Powered hand tools, rather than manual, Hand tools vary con- Characteristics to Avoid should be used whenever siderably in shape, size, When Selecting Hand Tools possible, because re- and weight. The way a peated manual exertion tool is designed influ- ■ Sharp edges and corners on tool handles. is more likely to cause ences the hand positions ■ Narrow handles, which concentrate large discomfort and injury.
    [Show full text]
  • Operating Instructions and Parts Manual 14-Inch Vertical Band Saws Models: J-8201, J-8203, J-8201VS, J-8203VS
    Operating Instructions and Parts Manual 14-inch Vertical Band Saws Models: J-8201, J-8203, J-8201VS, J-8203VS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414500 Ph.: 800-274-6848 Revision F 09/2018 www.jettools.com Copyright © 2016 JET Warranty and Service JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official JET branded website. • JET products carry a limited warranty which varies in duration based upon the product. (See chart below) • Accessories carry a limited warranty of one year from the date of receipt. • Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects. Who is Covered This warranty covers only the initial purchaser of the product from the date of delivery. What is Covered This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance. JET woodworking machinery is designed to be used with Wood. Use of these machines in the processing of metal, plastics, or other materials outside recommended guidelines may void the warranty.
    [Show full text]