HARNESSES HARNESS MATRIX To order a harness to meet your specific needs, use the following procedure. Simply insert the digit noted to configure the harness you desire(note: harness always starts with a 6)

CHEST LEG STRAP FALL ARREST BODY BELT SHOULDER 6 ATTACHMENT HARNESS TYPE ATTACHMENT ATTACHMENT ATTACHMENT PADS If prefix 'U' X 0 = Used only with 0 = None 0 = None inserted harness type 3 universal fit. Only available with harness with upper HARNESSES body adjustment .

3 = Hook and Loop 3 = Cross-over design 3S = #3B w/ quick 1 = Step-in leg - 5 = Permanently 1 = Outside Mount 1" 1 = Permanent Chest Strap w/ perm attachment connect buckles no buckles attached Plastic Buckles strap located 3 3/4" above front 'X'. Applicable only to chest strap attachment 0

4 = Interlocking 3B = #3 with loop 7G = Spring loaded 3 = Interlocking 5Q = Energy Absorber 4 = Body belt attached 2 = Replaceable Buckle at cross on front friction buckle on permanently through means of loops of harness vertical shoulder attached attached to harness straps

4B = Interlocking 3D = #3 without chest 8 = Basic Harness 3A = Interlocking 6 = Dee Ring (1069) 4C = Straps with 3 = Replaceable w/ 1" Buckle black strap, with 1 3/4" no shoulder strap Buckle (black Interlock buckles to 4-ply loop for powder coated nylon attach. pcs adjustment powder coated) connect Buck Ergo snaphook and hook stitched across back Harness. Buck Ergo and loop to hold lanyard shoulder straps directly Only on shoulder (6JLV) below the chafe in back

8C = Quick Connect 3E = #3D with loop 9 = Basic harness 4 = Grommets 7 = Web loop 4Q = Body Belt 4 = Light Weight Buckle w/ hook and at cross on front of with shoulder strap Permanently Permanent loop for vertical harness adjustment attached adjustments

8D = Quick Connect 9A = Basic harness. 8C = Quick 9 = Small shoulder 8E/ = # 3 FR Style Pad Buckle w/ black belt #9 with black coated Connect Buckle dee ring chafes for vertical shoulder strap adjustment hardware

*Harnesses configured from the matrix are non-returnable

Indicates meets ASTM F887 Electric Arc Performance Requirements. 8E = Quick Connect 350 lb Rated 50 Buckle w/ dee ring HARNESSES

HARNESS MATRIX HARNESSES

A = 15" rappelling loop (seat section) A2 = 3" length rappelling loops on A3 = 1½" diameter rappelling loops. A4 = 'A' rappelling loop with the - 1" yellow web with hook and loop vertical shoulder straps. Sewn to shoulder strap at 20° angle addition of 3" wide elastic keeper. back Only available on harness type 8. and encased in yellow tube wear piece. Not available on harness type 8.

C = 18" extension strap (1" yellow C1 = cover for adjustment C2 = 18" extension strap (1¾" orange C4 = 1¾" orange web cross piece to web) that terminates with a dee ring buckles with 2" hook and loop. web) terminating with a small dee prevent fall arrest attachment from ring. sliding down.

D1 = 24" extension strap (1" yellow E = Left side only E1 = right side only F = Work positioning dee rings G = 18" extension strap (1" yellow web) terminating with dee ring 1¾" diameter loop (1" 4-ply nylon) in attached to harness by green web, web) that terminates with ¾" hip area to attach snap hook. which goes around the back and diameter loop for carabiner. For both sides use EE connects to two dee rings.

G1 = 18" extension strap (1" yellow G3 = 18" extension strap (1¾" G4 = 18" extension strap (1¾" G6 = 18" extension strap (1¾" web) with a loop (approx. 3" dia.) to orange web) with wear piece around orange web) that terminates with a orange web) that terminates with half hitch on an energy absorber. 3½" diameter loop for attachment of 1¾" diameter loop encased in yellow a small dee ring attached in a 1¾" energy absorber. wear piece. diameter loop encased in yellow tube wear piece. Indicates meets ASTM F887 Electric Arc Performance Requirements.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com; Email: [email protected] 51 HARNESSES

HARNESS MATRIX HARNESSES

H = Reflective material H1 = 10" Reflective strips stitched to K1 = Kevlar mesh; meets ASTM K4 = Mini BuckFit style back pad. standard gray front and back shoulder straps. Hook F887 electric arc performance K3 = Mini BuckFit style back pad and and loop chest strap. requirements. leg pads

P = Shoulder Dee Ring for retrieval R3 = Type X red upper section, black T2 = Harness made without leg strap T3 = Harness made without leg strap lower section. No chafes under elastic bands and leather chafes and leather chafe and with 2" plastic slide buckles. with 2" plastic slide buckles. buckle.

T7 = 3" diameter loop with 1" yellow T8 = 3" diameter loop with 1" yellow T9 = Harness manufactured without V9 = Dri-Lex padded shell and leg web with a yellow fluorescent web with a yellow fluorescent leather chafes behind hardware but pads reflective strip on each shoulder for reflective strip on the side of each with elastic bands. green with gray type 13 webbing retrieval. hip.

Indicates meets ASTM F887 Electric Arc Performance Requirements. 52