DOCSLIB.ORG

EZT-430S 4.3 User Manual

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
EZT-430S 4.3 User Manual EZT-430S 4.3 User Manual EZT-430S User Manual Rev. A March 2020 (V1.1.5) Supersedes: - EZT-430S 2 Safety Information in this Manual Notes, cautions and warnings appear throughout this book to draw your attention to important operational and safety information A “NOTE” marks a short message to alert you to an important detail. A “CAUTION” appears with information that is important for protecting your equipment and insuring performance. A “WARNING” appears with information that is important for protecting you, others and equipment from damage. Pay very close attention to all warnings that apply to your application. This symbol (an exclamation point in a triangle) precedes a general CAUTION or WARNING statement. This symbol (a lightning bolt in a lightning bolt in a triangle) precedes an electric shock hazard CAUTION or WARNING safety statement. Technical Assistance If you encounter a problem with your EZT-430S controller, review all of your configuration information to verify that your selections are consistent with your application: inputs; outputs; alarms; limits; etc. If the problem persists after checking the above, you can get technical assistance by dialing +1 (877) 233-9871 or by faxing your request to +1 (513) 326-5258, Monday thru Friday, 8:00 a.m. to 5:00 p.m. Eastern Standard Time. You can also email your request to [email protected]. An applications engineer will discuss your application with you. Please have the following information available: • Complete Model #’s and/or Serial #’s for Component(s) in Question • Complete Software Version #’s • All Configuration Information • All User Manuals Warranty and return information is on the back cover of this manual. Comments Your comments or suggestions on this manual are welcome. Please send them to: Telephone: +1 (513) 326-5252; fax: +1 (513) 326-5258 Toll Free: +1 (877) 233-9871 [email protected] EZT-430S 1 What is the EZT-430S? ................................................................................................ 9 1.1 Features ................................................................................................................................9 2 Installation ................................................................................................................. 11 2.1 Enclosure Guidelines .......................................................................................................... 11 2.1.1 Locating the EZT-430S Touch Screen Interface ........................................................................... 11 2.2 Environmental Considerations ............................................................................................. 12 2.3 Mounting Dimensions .......................................................................................................... 12 2.3.1 EZT-430S Touch Screen Interface ................................................................................................ 12 2.3.2 EZT-430S Process Loop/Limit Controls......................................................................................... 14 3 Wiring ......................................................................................................................... 15 3.1 Power Requirements ........................................................................................................... 15 3.1.1 Installing the Power-On Delay Relay ............................................................................................. 15 3.2 Connecting to the EZT-430S Interface ................................................................................ 17 3.2.1 Process Loop/Limit Controller Communications ............................................................................ 18 3.2.2 Connecting to the Process Loop/Limit Controls ............................................................................. 19 3.2.3 User Serial Communications ......................................................................................................... 19 4 Configuring the EZT-430S ........................................................................................ 21 4.1 Control Setup ......................................................................................................................23 4.1.1 Cascade Settings ........................................................................................................................... 24 4.2 Loop Address Utility ............................................................................................................ 26 4.3 Loop Configuration .............................................................................................................. 27 4.3.1 Tagname ........................................................................................................................................ 27 4.3.2 Input Type ...................................................................................................................................... 27 4.3.3 Input Units ...................................................................................................................................... 28 4.3.4 Decimal Point ................................................................................................................................. 28 4.3.5 Input Low/High Scale ..................................................................................................................... 28 4.3.6 Input Filter ...................................................................................................................................... 29 4.3.7 Event Input Function ...................................................................................................................... 29 4.3.8 Event Input Alarm Message ........................................................................................................... 30 4.3.9 Low/High Limit Setpoint ................................................................................................................. 30 4.3.10 Output 1 Function ........................................................................................................................... 31 4.3.11 Output 1 Failure Transfer ............................................................................................................... 32 4.3.12 Output 1 ON-OFF Control Hysteresis ............................................................................................ 32 4.3.13 Output 1 Cycle Time ...................................................................................................................... 32 4.3.14 Output 1 Low/High Limit Values ..................................................................................................... 32 4.3.15 Output 2 Function ........................................................................................................................... 33 4.3.16 Output 2 Failure Transfer ............................................................................................................... 34 4.3.17 Output 2 Low/High Limit Values ..................................................................................................... 34 4.3.18 Output 2 Low/High Limit Values ..................................................................................................... 34 4.3.19 Output 3 Function ........................................................................................................................... 34 4.3.20 Output 3 Failure Transfer ............................................................................................................... 35 4.3.21 Output 4 Function ........................................................................................................................... 35 4.3.22 Output 4 Failure Transfer ............................................................................................................... 36 4.3.23 Output 4 Low/High Limit Values ..................................................................................................... 36 4.3.24 Output 4 Retransmit Low/High Scale ............................................................................................. 36 4.3.25 Alarm (1-3) Function ...................................................................................................................... 37 4.3.26 Alarm (1-3) Mode ........................................................................................................................... 38 4.3.27 Alarm (1-3) Indication ..................................................................................................................... 38 4.3.28 Alarm (1-3) Setpoint ....................................................................................................................... 39 4.3.29 Alarm (1-3) Hysteresis ................................................................................................................... 39 4.3.30 Alarm (1-3) Delay ........................................................................................................................... 40 4 ` EZT-430S 4.3.31 Setpoint at Start of Automatic Program .......................................................................................... 40 4.3.32 Setpoint at End of Automatic Program ........................................................................................... 41 4.3.33 Power Fail Recovery .....................................................................................................................
Load more

Recommended publications
  • Hunnic Warfare in the Fourth and Fifth Centuries C.E.: Archery and the Collapse of the Western Roman Empire
    HUNNIC WARFARE IN THE FOURTH AND FIFTH CENTURIES C.E.: ARCHERY AND THE COLLAPSE OF THE WESTERN ROMAN EMPIRE A Thesis Submitted to the Committee of Graduate Studies in Partial Fulfillment of the Requirements for the Degree of Master of Arts in the Faculty of Arts and Science. TRENT UNIVERSITY Peterborough, Ontario, Canada © Copyright by Laura E. Fyfe 2016 Anthropology M.A. Graduate Program January 2017 ABSTRACT Hunnic Warfare in the Fourth and Fifth Centuries C.E.: Archery and the Collapse of the Western Roman Empire Laura E. Fyfe The Huns are one of the most misunderstood and mythologized barbarian invaders encountered by the Roman Empire. They were described by their contemporaries as savage nomadic warriors with superior archery skills, and it is this image that has been written into the history of the fall of the Western Roman Empire and influenced studies of Late Antiquity through countless generations of scholarship. This study examines evidence of Hunnic archery, questions the acceptance and significance of the “Hunnic archer” image, and situates Hunnic archery within the context of the fall of the Western Roman Empire. To achieve a more accurate picture of the importance of archery in Hunnic warfare and society, this study undertakes a mortuary analysis of burial sites associated with the Huns in Europe, a tactical and logistical study of mounted archery and Late Roman and Hunnic military engagements, and an analysis of the primary and secondary literature. Keywords: Archer, Archery, Army, Arrow, Barbarian, Bow, Burial Assemblages, Byzantine, Collapse, Composite Bow, Frontier, Hun, Logistics, Migration Period, Roman, Roman Empire, Tactics, Weapons Graves ii ACKNOWLEDGEMENTS I would first like to thank my thesis advisor, Dr.
    [Show full text]
  • Byzantine Missionaries, Foreign Rulers, and Christian Narratives (Ca
    Conversion and Empire: Byzantine Missionaries, Foreign Rulers, and Christian Narratives (ca. 300-900) by Alexander Borislavov Angelov A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy (History) in The University of Michigan 2011 Doctoral Committee: Professor John V.A. Fine, Jr., Chair Professor Emeritus H. Don Cameron Professor Paul Christopher Johnson Professor Raymond H. Van Dam Associate Professor Diane Owen Hughes © Alexander Borislavov Angelov 2011 To my mother Irina with all my love and gratitude ii Acknowledgements To put in words deepest feelings of gratitude to so many people and for so many things is to reflect on various encounters and influences. In a sense, it is to sketch out a singular narrative but of many personal “conversions.” So now, being here, I am looking back, and it all seems so clear and obvious. But, it is the historian in me that realizes best the numerous situations, emotions, and dilemmas that brought me where I am. I feel so profoundly thankful for a journey that even I, obsessed with planning, could not have fully anticipated. In a final analysis, as my dissertation grew so did I, but neither could have become better without the presence of the people or the institutions that I feel so fortunate to be able to acknowledge here. At the University of Michigan, I first thank my mentor John Fine for his tremendous academic support over the years, for his friendship always present when most needed, and for best illustrating to me how true knowledge does in fact produce better humanity.
    [Show full text]
  • 1 Heretical Self-Defence in the Middle Ages
    Heretical Self-Defence in the Middle Ages: Text, Law, Subterfuge, Flight and Arms University of Nottingham Abstracts Session 1: Late-antique and early-medieval Models ‘North African Donatism: Fighting against the heretical assimilation’ Carles Buenecasa Perez, University of Barcelona Donatism was nothing but a schism, and its theology was not so different from Catholicism. That’s why, in Africa, Donatism was widely widespread. Catholic bishops decided that, demonstrating to the emperors that Donatism was an heresy, they could impose on Donatists the strict legislation against heretics. Augustine of Hippo has played a significant role in this process, and the arguments he used were multiple. First of all, the bishop of Hippo developed thelogical and ecclesiological concepts, like the uselessness of the baptism given by those who are out of the Church, the lack of theological fundament for rebaptism, etc. Equally, he carried out a deep historical research to remind the Donatists the origins of their own schism (several lies behind the election of Cecilianus, the innocence of Felix of Abthugni...), and to denounce Donatists’s violences (the rupture of ecclesiastical unity, circoncellions’s assassinations...). Then, once Catholic bishops had proved the heretical condition of Donatism, imperial power could promulgate several edicts for its repression from 405. Donatists felt very mistreated by their opponents so they reacted in many and diverse ways. The only problem is that most of our sources are the Catholic ones, so there are not too much objectives. Augustine insists in the fact that the main Donatist reaction was violence agaisnt catholics, but can we really admit this? ‘Gottschalk of Orbais: the quest for Gottschalk’s models’ Bojana Radovanović, Austrian Academy of Sciences, Institut für Mittelalterforschung ‘Heretical self-defence in the Pseudo-Dionysius’ Alan P.
    [Show full text]
  • OPUS IMPERFECTUM AUGUSTINE and HIS READERS, 426-435 A.D. by MARK VESSEY on the Fifth Day Before the Kalends of September [In
    OPUS IMPERFECTUM AUGUSTINE AND HIS READERS, 426-435 A.D. BY MARK VESSEY On the fifth day before the Kalends of September [in the thirteenth consulship of the emperor 'Theodosius II and the third of Valcntinian III], departed this life the bishop Aurelius Augustinus, most excellent in all things, who at the very end of his days, amid the assaults of besieging Vandals, was replying to I the books of Julian and persevcring glorioi.islyin the defence of Christian grace.' The heroic vision of Augustine's last days was destined to a long life. Projected soon after his death in the C,hronicleof Prosper of Aquitaine, reproduccd in the legendary biographies of the Middle Ages, it has shaped the ultimate or penultimate chapter of more than one modern narrative of the saint's career.' And no wonder. There is something very compelling about the picture of the aged bishop recumbent against the double onslaught of the heretical monster Julian and an advancing Vandal army, the ex- tremity of his plight and writerly perseverance enciphering once more the unfathomable mystery of grace and the disproportion of human and divine enterprises. In the chronicles of the earthly city, the record of an opus mag- num .sed imperfectum;in the numberless annals of eternity, thc perfection of God's work in and through his servant Augustine.... As it turned out, few observers at the time were able to abide by this providential explicit and Prosper, despite his zeal for combining chronicle ' Prosper, Epitomachronicon, a. 430 (ed. Mommsen, MGH, AA 9, 473). Joseph McCabe, .SaintAugustine and His Age(London 1902) 427: "Whilst the Vandals thundered at the walls Augustine was absorbed in his great refutation of the Pelagian bishop of Lclanum, Julian." Other popular biographers prefer the penitential vision of Possidius, hita Augustini31,1-2.
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 6,231,386 B1 W (45) Date of Patent: May 15, 2001
    USOO6231386B1 (12) United States Patent (10) Patent No.: US 6,231,386 B1 W (45) Date of Patent: May 15, 2001 (54) ELECTRICAL CONNECTOR WITH 5,385,478 1/1995 Kiekawa .............................. 439/570 IMPROVED SOLDER PADS 5,591,047 1/1997 Yamada et al. ...................... 439/570 5,704,807 1/1998 Sherman et al. ..................... 439/570 (75) Inventor: Kun-Tsan Wu, Tu-Chen (TW) 6,007,352 12/1999 Azuma et al. ....................... 439/570 6,012,949 1/2000 Lok ...................................... 439/570 (73) Assignee: Hon Hai Precision Ind. Co., Ltd., * cited by examiner Taipei Hsien (TW) Primary Examiner-Gary F. Paumen (*) Notice: Subject to any disclaimer, the term of this (74) Attorney, Agent, or Firm Wei Te Chung patent is extended or adjusted under 35 U.S.C. 154(b) by 0 days. (57) ABSTRACT An electrical connector includes an insulative housing, a (21) Appl. No.: 09/474,322 pair of contacts and a pair of L-shaped Solder pads received in the insulative housing, respectively. The housing defines (22) Filed: Dec. 29, 1999 a pair of T-shaped channels Spaced from each other in a (51) Int. Cl." ..................................................... H01R 13/73 bottom portion thereof. Each T-shaped channel includes a (52) U.S. Cl. .............................................................. 439/570 groove and a receSS laterally eXposing to the groove. Each (58) Field of Search ..................................... 439/570-572 L-shaped Solder pad includes a first portion and a Second 439'83 portion being generally perpendicular to each other. A pro trusion is embossed in a Surface of the first portion of each (56) References Cited Solder pad.
    [Show full text]
  • Going with the Grain: Athenian State Formation and the Question Of
    Princeton/Stanford Working Papers in Classics Going with the Grain: Athenian State Formation and the Question of Subsistence in the 5th and 4th Centuries BCE Version 1.0 January 2006 Ulrike Krotscheck Stanford University Abstract: In this paper, I address the role of Athenian grain trade policy as a driving factor of the city’s growing power in the 5th and 4th centuries. Recent explanations of increasing Athenian hegemony and dominance over other poleis during this time period have focused on the role of warfare. I present an equally important, yet often-overlooked factor: food supply. Athens was dependent on grain imports throughout the Classical Period. Through examination of the ancient sources, I demonstrate that the increasing need to secure subsistence goods for Athens significantly propelled its ambition for power, causing a fundamental shift from a non- interventionist government policy to one of heavy intervention between the 5th and the 4th centuries BCE. This shift corresponded to an increasing complexity within the mechanisms of the city’s politics. It helped propel Athenian state formation and affected the dynamic of power and politics in the ancient Mediterranean world. © Ulrike Krotscheck. [email protected] 2 Introduction In his recent book Against the Grain, Richard Manning argues that most apparently fundamental forces that have shaped the world, such as trade, wealth, disease, slavery, imperialism, and colonialism, are based on agricultural production. While Manning does offer a description of agriculture throughout human history, his main focus is on contemporary politics, specifically the US agribusiness.1 Manning may go a bit far in his ultimate conclusion – calling, among other things, for a return to hunting for subsistence - but he makes a salient point.
    [Show full text]
  • GNS 430(A) Pilot’S Guide and Reference
    GNS 430(A) Pilot’s Guide and Reference RECORD OF REVISIONS Revision Date of Revision Description A 12/98 Initial Release B 4/99 Update to conform to recent SW changes C 6/99 Added Addendum D 7/99 Update for SW 2.10 E 4/00 Update for SW 2.15 F 7/00 Updated Power On, Wind Vector, Crossfill, DME, and Fuel Plan G 5/03 Added FDE Section, updated per SW 5.01, misc. changes H 5/06 Changed to 8 inch x 8.5 inch format. Added TERRAIN, misc. changes J 6/06 Made various layout corrections, no content changes K 2/07 Updated per Main SW v5.02 L 10/07 Updated per Main SW v5.03 M 05/08 Removed Proximity Advisory info from Section 12 N 08/08 Converted format of figures to accommodate printing process P 12/09 Added Section 12.2, GTS 8XX Traffic Systems 190-00140-00 Rev. P GNS 430(A) Pilot’s Guide and Reference i COPYRIGHT Copyright © 2009 Garmin Ltd. or its subsidiaries. All rights reserved. This manual reflects the operation of Main System Software version 5.03 or later. Some differences may be observed when comparing the information in this manual to other software versions. Garmin International, Inc., 1200 East 151st Street, Olathe, Kansas 66062 USA p: 913.397.8200 f: 913.397.8282 Garmin AT, Inc., 2345 Turner Road SE, Salem, Oregon 97302 USA p: 503.391.3411 f: 503.364.2138 Garmin (Europe) Ltd., Liberty House, Bulls Copse Road, Hounsdown Business Park, Southampton, SO40 9RB, U.K.
    [Show full text]
  • GPSMAP® 400/500 Series Owner’S Manual © 2010—2011 Garmin Ltd
    GPSMAP® 400/500 series owner’s manual © 2010—2011 Garmin Ltd. or its subsidiaries Garmin International, Inc. Garmin (Europe) Ltd. Garmin Corporation 1200 East 151st Street, Liberty House No. 68, Zhangshu 2nd Road, Olathe, Kansas 66062, USA Hounsdown Business Park, Xizhi Dist., New Taipei City, 221, Taiwan (R.O.C.) Tel. (913) 397.8200 or (800) 800.1020 Southampton, Hampshire, SO40 9LR UK Tel. 886/2.2642.9199 Fax (913) 397.8282 Tel. +44 (0) 870.8501241 (outside the UK) Fax 886/2.2642.9099 0808 2380000 (within the UK) Fax +44 (0) 870.8501251 All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products.
    [Show full text]
  • Honorius, Galla Placidia, and the Struggles for Control of the Western Roman Empire, 405-425 C.E
    University of Tennessee, Knoxville TRACE: Tennessee Research and Creative Exchange Doctoral Dissertations Graduate School 5-2013 Crisis of Legitimacy: Honorius, Galla Placidia, and the Struggles for Control of the Western Roman Empire, 405-425 C.E. Thomas Christopher Lawrence [email protected] Follow this and additional works at: https://trace.tennessee.edu/utk_graddiss Part of the European History Commons Recommended Citation Lawrence, Thomas Christopher, "Crisis of Legitimacy: Honorius, Galla Placidia, and the Struggles for Control of the Western Roman Empire, 405-425 C.E.. " PhD diss., University of Tennessee, 2013. https://trace.tennessee.edu/utk_graddiss/1751 This Dissertation is brought to you for free and open access by the Graduate School at TRACE: Tennessee Research and Creative Exchange. It has been accepted for inclusion in Doctoral Dissertations by an authorized administrator of TRACE: Tennessee Research and Creative Exchange. For more information, please contact [email protected]. To the Graduate Council: I am submitting herewith a dissertation written by Thomas Christopher Lawrence entitled "Crisis of Legitimacy: Honorius, Galla Placidia, and the Struggles for Control of the Western Roman Empire, 405-425 C.E.." I have examined the final electronic copy of this dissertation for form and content and recommend that it be accepted in partial fulfillment of the equirr ements for the degree of Doctor of Philosophy, with a major in History. Michael E. Kulikowski, Major Professor We have read this dissertation and recommend its acceptance: Christine Shepardson, Maura Lafferty, Thomas Burman Accepted for the Council: Carolyn R. Hodges Vice Provost and Dean of the Graduate School (Original signatures are on file with official studentecor r ds.) Crisis of Legitimacy: Honorius, Galla Placidia, and the Struggles for Control of the Western Roman Empire, 405-425 C.E.
    [Show full text]
  • Bad Boys: Circumcellions and Fictive Violence
    Princeton/Stanford Working Papers in Classics Bad Boys: Circumcellions and Fictive Violence Version 2.1 February 2006 Brent D. Shaw Princeton University Abstract: The circumcellions were roving bands of violent men and women found in late Roman Africa. The problem is that far more of them have been produced by literary fictions, ancient and modern, than once existed. The fictions have their own intriguing history, but they are otherwise useless for those who are interested in the banality of what actually happened. © Brent D. Shaw [email protected] 2 Bad Boys: Circumcellions and Fictive Violence The roving bands of armed men, and women, who wandered through the north African countryside in the late fourth and early fifth century, known as circumcellions, engaged in violent assaults on their sectarian enemies. These circumcellion bands were a characteristic element of the sectarian violence that rent the two Christian churches, the Catholic and “the Donatist,” into which the Christian community in Africa had come to be divided in the post-Constantian age.1 The aim of this inquiry is not to describe these violent men and their activities yet again, but rather to begin a process of questioning the standard claims made about them by modern historians.2 The essence of the modern project of identifying the circumcellions and their activities has been to apply all available data in order to produce a general picture of a social movement. In the rush to sketch this picture, however, the nature of the data has never been fully and rigorously interrogated nor has the historical context of their production 1 This paper is based on the oral presentation made at the Shifting Frontiers V Conference.
    [Show full text]
  • Inventory Control Form Titanium Cannulated Humeral Nail-EX System
    Inventory Control Form Titanium Cannulated Humeral Nail-EX System Patient Information: SYNTHES (USA) SYNTHES (Canada) Ltd. To Order: (800) 523-0322 To Order: (800) 668-1119 Date: Hospital: Surgeon: Procedure: Implants 7 mm Titanium Cannulated Proximal 11 mm Titanium Cannulated Humeral Humeral Nail-EX, Sterile Nail-EX, Sterile LENGTH LENGTH LENGTH 04.001.210S 150 mm 04.001.618S 190 mm 04.001.632S 260 mm 04.001.620S 200 mm 04.001.634S 270 mm 04.001.622S 210 mm 04.001.636S 280 mm 9 mm Titanium Cannulated Proximal 04.001.624S 220 mm 04.001.638S 290 mm Humeral Nail-EX, Sterile 04.001.626S 230 mm 04.001.640S 300 mm 04.001.628S 240 mm 04.001.642S 310 mm LENGTH 04.001.410S 150 mm 04.001.630S 250 mm 04.001.644S 320 mm Titanium End Cap with T25 StarDrive for 11 mm Titanium Cannulated Proximal Titanium Humeral Nail-EX Spiral Blade◊ Humeral Nail-EX, Sterile LENGTH 04.001.000 0 mm extension 04.001.610S 150 mm 04.001.001 5 mm extension 04.001.002 10 mm extension 04.001.003 15 mm extension 7 mm Titanium Cannulated Humeral Nail-EX, Sterile LENGTH LENGTH Titanium Spiral Blade for Titanium 04.001.218S 190 mm 04.001.232S 260 mm Humeral Nails◊ 04.001.220S 200 mm 04.001.234S 270 mm LENGTH LENGTH 04.001.222S 210 mm 04.001.236S 280 mm 462.634 34 mm 462.646 46 mm 04.001.224S 220 mm 04.001.238S 290 mm 462.636 36 mm 462.648 48 mm 04.001.226S 230 mm 04.001.240S 300 mm 462.638 38 mm 462.650 50 mm 04.001.228S 240 mm 04.001.242S 310 mm 462.640 40 mm 462.652 52 mm 04.001.230S 250 mm 04.001.244S 320 mm 462.642 42 mm 462.654 54 mm 462.644 44 mm 9 mm Titanium Cannulated Humeral Nail-EX, Sterile LENGTH LENGTH 04.001.418S 190 mm 04.001.432S 260 mm 04.001.420S 200 mm 04.001.434S 270 mm 04.001.422S 210 mm 04.001.436S 280 mm 04.001.424S 220 mm 04.001.438S 290 mm 04.001.426S 230 mm 04.001.440S 300 mm 04.001.428S 240 mm 04.001.442S 310 mm 04.001.430S 250 mm 04.001.444S 320 mm Synthes is a trademark of Synthes, Inc.
    [Show full text]
  • GPSMAP 400 Series Owner’S Manual © 2007 Garmin Ltd
    GPSMAP 400 series owner’s manual © 2007 Garmin Ltd. or its subsidiaries Garmin International, Inc. Garmin (Europe) Ltd. Garmin Corporation 1200 East 151st Street, Liberty House No. 68, Jangshu 2nd Road, Olathe, Kansas 66062, USA Hounsdown Business Park, Shijr, Taipei County, Taiwan Tel. (913) 397.8200 or (800) 800.1020 Southampton, Hampshire, SO40 9RB UK Tel. 886/2.2642.9199 Fax (913) 397.8282 Tel. +44 (0) 870.8501241 (outside the UK) Fax 886/2.2642.9099 0808 2380000 (within the UK) Fax +44 (0) 870.8501251 All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products.
    [Show full text]