Industrial Networking Solutions for Mission Critical Applications

Total Page:16

File Type:pdf, Size:1020Kb

Industrial Networking Solutions for Mission Critical Applications www.hirschmann.com GLOBAL LOCATIONS Industrial Networking Solutions for Mission Critical Applications For more information, please visit us at: www.belden.com/hirschmann Industrial Networking Solutions for Mission Critical Applications Critical Mission Industrial for Networking Solutions UNITED STATES CANADA LATIN AMERICA and the CARIBBEAN ISLANDS Division Headquarters Industrial Networking National Business Regional Office – Americas (Hirschmann/GarrettCom/ Center 6100 Hollywood Boulevard 2200 U.S. Highway 27 South Tofino Security) 2280 Alfred-Nobel Suite 110 Richmond, IN 47374 255 Fourier Ave. Suite 200 Hollywood, Florida 33024 Phone: 765-983-5200 Fremont, CA 94539, USA Saint-Laurent, QC Phone: 954-987-5044 Canada H4S 2A4 Inside Sales: 800-235-3361 Phone: 510-438-9071 Fax: 954-987-8022 Fax: 765-983-5294 Fax: 510-952-3456 Phone: 514-822-2345 [email protected] [email protected] www.belden.com Fax: 514-822-7979 www.belden.com [email protected] Belden 2200 U.S. Highway 27 South Richmond, IN 47374a Inside Sales: 1-800-BELDEN-1 (1-800-235-3361) Industry-specific solutions that can Phone: 765-983-5200 Fax: 765-983-5294 improve productivity and operational [email protected] efficiency today, while laying the foundations for tomorrow‘s IIoT opportunities. Belden, Belden Sending All The Right Signals, GarrettCom, Hirschmann, Lumberg Automation, Tofino Security, Tripwire and the Belden logo are trademarks or registered trademarks of Belden Inc. or its affiliated companies in the United States and other jurisdictions. Belden and other parties may also have trademark rights in other terms used herein. Edition 2017 ©Copyright 2017, Belden Inc. Edition 2017 Printed in Germany HIRSCHMANN-INDUSTRIAL-NETWORKING-SOLUTIONS_CA_INIT_HIR_0117_A_AG Prepare your infrastructure for the Industrial Internet of Things (IIoT) The IIoT is widely considered to be one of the primary trends affecting industrial businesses today and in the future. Indus- tries are pushing to modernize systems and equipment to meet new regulations, to keep up with increasing market speed, and to deal with the most sophisticated technologies. Businesses that have em- braced the IIoT have seen significant improvements to security, efficiency, and profitability, and it is expected that this trend will continue as IIoT technologies are more widely adopted. You can depend on us when you need industry-specific solutions that can improve productivity and operational efficiency today, while laying the founda- tions for tomorrow’s IIoT opportunities. 2 1-855-400-9071 www.belden.com/hirschmann More Convenience and More Solutions for Networks in Harsh Environments and Large-scale Infrastructures Belden Industrial Solutions Belden has brought together a comprehensive • Our sales and engineering professionals can Training line of industrial cabling, connectivity and audit, recommend/design, configure and Backed by years of meeting and exceeding networking devices, offering the most reliable assemble the products and systems the needs of a broad range of end-user communications solutions for your application. to your specific requirements. applications, Belden is ideally suited to offer Whether you are networking your devices to • Our global manufacturing, distribution and beginners and networking experts alike the the controllers, connecting the controllers to support network makes our products and opportunity to expand their understanding the control room, relaying data between the services available to you globally. of mission-critical networks. control room, the engineering department, and remote manufacturing sites – or all of the Belden has developed a series of training Offering Comprehensive above – Belden has the products you need to programs that are given by Belden-certified Service & Support seamlessly connect your communications. individuals – all experts in industrial net- Belden recognizes that comprehensive know- working and cabling. From the petrochemical, automotive, phar- how is necessary to ensure an optimized, maceutical, power generation, pulp and homogenous solution. We also know that Technical Support paper, metals, food and beverage, or general consultation, support and training requires At Belden, our personnel are poised to assist manufacturing plant to the corporate head- more than just a general understanding of our customers – ensuring maximum uptime quarters – and everywhere in between – the products, technologies and market trends. and reliability. And with offices in North Belden has your signal transmission solution. It requires a solid understanding of the appli- America, Asia and Europe, Belden can respond Belden offers the most dependable network cation and the ability to provide the type of globally. and communications system performance in support that is needed – when and where it tough and mission-critical environments. is needed. It requires the four key service and System Performance support areas that are critical to success: If Belden designs it, we guarantee performance Our Synergy Ensures Continuous • Network design consulting – period. We are committed to ensuring Performance • Training world-class signal connectivity and to signi- ficantly improve your operational up-time. With the Hirschmann and Tofino Security • Technical support product line additions to the Belden offering, All Belden components are “designed” to • System performance our line of Complete Industrial Solutions is deliver optimum performance: from cable, to uniquely positioned to provide the best connectors, to switches and routers. Based Network Design Consulting network and communications infrastructure on this comprehensive product portfolio, we possible. Belden products and systems ex- Belden eliminates your design challenges have the necessary industrial solutions DNA pertise mean that you can maintain ongoing because we understand the issues surround- to deliver reliability. operations without interruption and costly ing the design and operation of networks in downtime – in any environment. Here are industrial and mission-critical environments. For more information on our service and a few more good reasons why Belden is Our engineers are available to work with you support offering, including our warranties, your best choice for industrial networking, to deliver high-availability networks that please go to the Belden web site at communications and control: meet your enterprise-wide IT needs. Whether www.belden.com to locate a Belden sales it’s designing systems for Greenfield facilities, representative near you. • We have the expertise to integrate your or integrating into existing IT environments, industrial and commercial networks. our highly-trained staff lifts the design • Our products are engineered to perform burden from your shoulders to ours. in the harshest and most demanding environments. We will consult with you to develop a strategy • We offer the broadest selection of – or we will develop and implement your products, for a complete, end-to-end full design – either way our staff is available Ethernet solution. to you. www.belden.com/hirschmann 1-855-400-9071 3 The Hirschmann Brand of Ethernet Switches, Wireless LAN, Security and Connectivity Products Sets the Standard for Quality, Reliability and Service offer office network interoperability. By using the standardized MRP, redundant network topologies are simplified – resulting in recovery from media failure within 500 ms down to 10 ms (FastMRP) and with Device Level Ring (DLR) even to 3 ms. Sustainable Security Solutions Comprehensive security features in switches, routers and firewalls according to latest standards like IEC62443 and best practices offers all around protection in mission critical networks. Regular updates of the device Hirschmann Switches Hirschmann, a Belden brand provides the software enable customer’s networks to be industry with leading Ethernet networking compliant to todays and future regulations. maximize throughput, technology and sets the standards for quality, reliability and service. Broad Product Line simplify installation, and The breadth of our product line is unmatched Robust and includes serial to fiber optic converters, fieldbus repeaters for all major fieldbus pro- reduce overall costs. Hirschmann’s years as a networking leader tocols, managed and unmanaged Ethernet and pioneer, the use of premium electronic switches (3-51 ports) with an almost limitless components and effective (fan-less) thermal mix of copper/fiber ports, Layer 3 switches, management translates to superior perfor- media converters, wireless Access Points/ mance and the highest MTBF (mean time Clients/Bridges, firewalls with VPN tunneling between failure) values possible – even at and deep packet inspection and network operational temperatures as high as +85 °C. management software (SNMP and OPC). Easy to Configure Network Software Our managed switches are easy to configure Monitoring and visualizing your network with an integrated password controlled web is made easy with the use of our Industrial interface, via SNMP or CLI (command line HiVision network management software. interface), providing secure remote configu- Requiring little or no IT knowledge, Industrial ration through the network. Configuration HiVision allows users to monitor alarms, data and device Operating System can be bandwidth utilization, and availability of saved and stored on an external flash-based networked devices – not just switches. configuration storage device, simplifying and Industrial HiVision allows the user to
Recommended publications
  • Wireless Technologies for the Next-Generation Train Control and Monitoring System
    Wireless Technologies for the Next-Generation Train Control and Monitoring System Jérôme Härri Aitor Arriola Pedro Aljama Communication Systems Communication Systems Communication Systems EURECOM Ikerlan Ikerlan Sophia-Antipolis, France Arrasate-Mondragón, Spain Arrasate-Mondragón, Spain [email protected] [email protected] [email protected] Igor Lopez Uwe Fuhr Marvin Straub Technology Division TCMS Communcations TCMS Communcations CAF R&D Bombardier Transportation Bombardier Transportation Beasain, Spain Mannheim, Germany Mannheim, Germany [email protected] [email protected] [email protected] Abstract—The Next Generation Train Control and functionalities (e.g. [4]). Yet, a study introducing the global Monitoring System (NG-TCMS) represents a major innovation NG-TCMS requirements and matching with a technology- of the European Railway industry introducing a wireless agnostic survey of various available wireless technologies is architecture as an enabler to enhanced automation, flexible train still missing. management and increased railway capacity. This paper surveys various available and future wireless technologies matching the In this paper, we describe the vision and functionalities of requirements both at train backbone and consist levels. the NG-TCMS, putting into perspective the performance Illustrating the challenges for a single technology to match all requirements of wireless links for the WLTB and WLCN with requirements, this paper also highlights the benefits of the the performance of selected wireless technologies. Our upcoming 5G technology for future NG-TCMS. contributions are threefold: (i) we introduce the future NG- TCMS, in particular the WLTB and WLCN, (ii) we provide a Keywords—5G-V2X, LTE-V2X, Wireless Train Backbone, technology-agnostic comparison of selected technologies Wireless Consist Network, 5G, NG-TCMS.
    [Show full text]
  • Digital Outputs 750-501, 750-502, 750-504, 750-516, 750-519 750-506 750-509 750-511 750-512, 750-513, 750-514, 750-517
    Modular I/O System SDS Manual Technical description, installation and configuration 750-136 Version 2.3.1 ii • General Copyright ã 1997-2001 by WAGO Kontakttechnik GmbH All rights reserved. WAGO Kontakttechnik GmbH Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: [email protected] Web: http://www.wago.com Technical Support Phone: +49 (0) 571/8 87 – 5 55 Fax: +49 (0) 571/8 87 – 4 30 E-Mail: [email protected] Every conceivable measure has been taken to ensure the correctness and com- pleteness of this documentation. However, as errors can never be fully ex- cluded we would appreciate any information or ideas at any time. We wish to point out that the software and hardware terms as well as the trademarks of companies used and/or mentioned in the present manual are generally trademark or patent protected. Modular I/O System SDS TABLE OF CONTENTS • iii TABLE OF CONTENTS Section 1: Explanations Section 2: System Description SDS, Configuration, Initial Starting, Diagnosis Section 3: Digital Inputs 750-400, 750-401, 750-402, 750-403, 750-405, 750-406, 750-410, 750-411, 750-408, 750-409, 750-412, 750-413, 750-414, 750-415 750-404 Section 4: Digital Outputs 750-501, 750-502, 750-504, 750-516, 750-519 750-506 750-509 750-511 750-512, 750-513, 750-514, 750-517 Section 5: Analog Inputs 750-452, 750-454, 750-482, 750-484 750-456, 750-461, 750-481 750-462, 750-469 750-465, 750-466, 750-486, 750-467, 750-468, 750-487, 750-488 750-472, 750-474 750-476, 750-478 Section 6: Analog Outputs 750-550, 750-580 750-552,
    [Show full text]
  • 599.061801Er – Movable Bridge Control System
    ITEM 599.061801ER – MOVABLE BRIDGE CONTROL SYSTEM DESCRIPTION 1.01 GENERAL REQUIREMENT A. This section includes general requirements for supply, delivery, storage, installation, testing and commissioning of the Control System required under the scope of the contract. B. Provide supervision, labor, and assistance to manufacturer’s field representative and/or technical directors for equipment to be installed as a part of this Contract. C. The Contractor shall provide service of qualified system integration company to develop and produce substantially completed electrical installation shop drawings as integrated system for Engineer’s review and approval. The substantially completed installation shop drawings shall be developed based on the final shop drawings of the actual equipment procured. The substantially completed installation shop drawings shall include layout/assembly/installation drawings of equipment, components terminal boxes and terminations drawings, schematic diagrams, point-to-point interconnection wirings with cable tags and termination identification for field installation. The Contractor shall coordinate all activities required to produce the substantially completed installation shop drawings. D. The design drawings of the control system are intended to convey functional and performance requirements of the movable bridge control system. The design drawings of the control system does not show all of the required components and circuit wiring interconnections required to provide a complete and fully function bridge control system. The contractor shall provide a fully integrated, complete automation control system, fully programmed (in terms of automation, control logic, operator interface, alarm and events logging) and ready for proper operation of the movable bridge. The supply shall be complete and shall include all equipment and components, system interconnections, configuration and software programming necessary to guarantee the proper control of the movable bridge from operator control panel and/or HMI.
    [Show full text]
  • Application of Ethernet Networking Devices Used for Protection and Control Applications in Electric Power Substations
    Application of Ethernet Networking Devices Used for Protection and Control Applications in Electric Power Substations Report of Working Group P6 of the Power System Communications and Cybersecurity Committee of the Power and Energy Society of IEEE September 12, 2017 1 IEEE PES Power System Communications and Cybersecurity Committee (PSCCC) Working Group P6, Configuring Ethernet Communications Equipment for Substation Protection and Control Applications, has existed during the course of report development as Working Group H12 of the IEEE PES Power System Relaying Committee (PSRC). The WG designation changed as a result of a recent IEEE PES Technical Committee reorganization. The membership of H12 and P6 at time of approval voting is as follows: Eric A. Udren, Chair Benton Vandiver, Vice Chair Jay Anderson Galina Antonova Alex Apostolov Philip Beaumont Robert Beresh Christoph Brunner Fernando Calero Christopher Chelmecki Thomas Dahlin Bill Dickerson Michael Dood Herbert Falk Didier Giarratano Roman Graf Christopher Huntley Anthony Johnson Marc LaCroix Deepak Maragal Aaron Martin Roger E. Ray Veselin Skendzic Charles Sufana John T. Tengdin 2 IEEE PES PSCCC P6 Report, September 2017 Application of Ethernet Networking Devices Used for Protection and Control Applications in Electric Power Substations Table of Contents 1. Introduction ...................................................................................... 10 2. Ethernet for protection and control .................................................. 10 3. Overview of Ethernet message
    [Show full text]
  • Deliverable Title
    Contract No. H2020 – 826098 CONTRIBUTING TO SHIFT2RAIL'S NEXT GENERATION OF HIGH CAPABLE AND SAFE TCMS. PHASE II. D1.1 – Specification of evolved Wireless TCMS Due date of deliverable: 31/12/2019 Actual submission date: 20/12/2019 Leader/Responsible of this Deliverable: Igor Lopez (CAF) Reviewed: Y Project funded from the European Union’s Horizon 2020 research and innovation programme Dissemination Level PU Public X CO Confidential, restricted under conditions set out in Model Grant Agreement Start date: 01/10/2018 Duration: 30 months CTA2-T1.1-D-CAF-005-09 Page 1 of 175 20/12/2019 Contract No. H2020 – 826098 Document status Revision Date Description First issue. Executive summary, Introduction and General 01 27/11/2018 architecture 02 27/06/2019 Contributions of sections 3.1, 3.2, 4.2, 5.2, 5.3, 6.1, 6.2, 6.3, 8 03 03/09/2019 Section 4.1 added. Updated sections 5, 6 and 8 Doc template: corrected footer Abbreviations and Acronyms list: updated Section 3.2: corrected internal references according to CTA2- 04 22/11/2019 T1.1-I-BTD-008-04 Sections 6: updated accoding to CTA2-T1.1-I-BTD-030-09, added new references, corrected internal references 05 05/12/2019 Section 4.2.3: content added 06 06/12/2019 Updated according to CTA2-T1.1-R-SNF-061-01 07 08/12/2019 Section 5.2 and 5.3 added. 08 17/12/2019 Reviews to new contributions applied Whole Document review from CTA2 T1.1 members, TMT and 09 20/12/2019 Safe4RAIL-2 members Disclaimer The information in this document is provided “as is”, and no guarantee or warranty is given that the information is fit for any particular purpose.
    [Show full text]
  • PT-G7509 Series IEC 61850-3 9G-Port Layer 2 Full Gigabit Managed Rackmount Ethernet Switches
    Datasheet Industry-specific Ethernet Switches PT-G7509 Series IEC 61850-3 9G-port Layer 2 full Gigabit managed rackmount Ethernet switches › IEC 61850-3, IEEE 1613 (power substations) compliant › VLAN Unaware: Supports priority-tagged frames to be received by specific IEDs › Turbo Ring, Turbo Chain, RSTP/STP, and MSTP for network redundancy › Isolated redundant power supplies with universal 24 VDC, 48 VDC, or 110/220 VDC/VAC power supply range › -40 to 85°C operating temperature range Introduction The PowerTrans PT-G7509 is equipped with 9 combo Gigabit Ethernet performance and transfer large amounts of video, voice, and data across ports, making it ideal for upgrading an existing network to Gigabit speeds a network quickly. The redundant Ethernet Turbo Ring, Turbo Chain, and and building a new full Gigabit backbone. The PT-G7509 is designed to RSTP/STP/MSTP (IEEE 802.1w/D/s) functions increase system reliability meet the demands of power substation automation systems (IEC 61850-3, and the availability of your network backbone. The choice of either front or IEEE 1613). Gigabit transmission increases bandwidth to provide higher rear wiring makes the PT-G7509 suitable for different types of application. General Features and Benefits • Command line interface (CLI) for quickly configuring major • IGMP snooping and GMRP for filtering multicast traffic from managed functions industrial Ethernet protocols • IPv6 Ready logo awarded (IPv6 Logo Committee certified) • IEEE 802.3ad, LACP for optimum bandwidth utilization • Software-based IEEE 1588v2
    [Show full text]
  • Evaluating a Flexible Architecture for Distributed Control
    (YDOXDWLQJD)OH[LEOH$UFKLWHFWXUHIRU 'LVWULEXWHG&RQWURO P. Bellini*, M. Buonopane*, M. Montanelli#, P. Nesi* 'HSDUWPHQWRI6\VWHPVDQG,QIRUPDWLFV8QLYHUVLW\RI)ORUHQFH,WDO\ 7HO)D[QHVL#LQJILLQJXQLILLWQHVL#GVLXQLILLW Æ6('6SHFLDO(OHFWURQLF'HVLJQHPDLOFEUXQL#VHGQHWFRP 3URMHFWZZZVLWHKWWSZZZGVLXQLILLWaKSFQZZZPXSDDFZZZSDJKWPO $EVWUDFW PDFURSRLQWV. The operation of a CNC can be summarized $ORQJ SURGXFWLRQ SLSHOLQHV LQ PDQXIDFWRU\ LQGXVWULHV as follows: VHYHUDO HODERUDWLRQ SKDVHV LQ ZKLFK WKH PRYHPHQW RI • Interpretation of ISO programs and interpolation. LQWHUSRODWHGD[HVDUHSUHVHQW7KHVHDFWLYLWLHVKDYHWREH Specific versions of ISO programs can be used for V\QFKURQL]HG ZLWK VHYHUDO RWKHU VLPSOHU DFWLYLWLHV DORQJ describing both the operation made by the machine WKH SLSHOLQH &RPSXWHUL]HG QXPHULFDO FRQWUROV IRU VXFK and by its I/O ports in terms of logic equations; V\VWHPVKDYHWREHIOH[LEOHDQGVWURQJO\H[SDQGDEOHDQG • Execution of low-level commands for axes of the UHXVDEOH VLQFH SLSHOLQHV DUH IUHTXHQWO\ UHFRQILJXUHG WR machines and for the other auxiliary services by UHDOL]H GLIIHUHQWO\ DUUDQJHG SLSHOLQHV ZLWK GLIIHUHQW means of several digital and analog ports (sensors); WHFKQLFDO UHTXLUHPHQWV ,Q WKLV SDSHU WKH DVVHVVPHQW RI The CNC is capable of (i) detecting errors/faults that VXFK D IOH[LEOH DUFKLWHFWXUH LV SUHVHQWHG RQ WKH EDVLV RI may occur on the machine, and (ii) monitoring its ZKLFK WKH EXLOGLQJ RI IOH[LEOH GLVWULEXWHG FRQWUROV IRU production. Errors are corrected by a special set of SLSHOLQHVLVSRVVLEOH7KHDUFKLWHFWXUHKDVEHHQGHILQHGLQ instructions and/or are reported towards the other WKH (635,7 +3&1 +LJK 3HUIRUPDQFH &RPSXWHU microprocessor-based systems that are monitoring the 1HWZRUNLQJ SURMHFW 083$$& 0XOWL 3URFHVVRU automated area. $UFKLWHFWXUH IRU $XWRPDWLF &RQWURO 083$$& CNCs are used as the elementary component for DUFKLWHFWXUHDQGSURWRW\SHKDVEHHQDVVHVVHGLQRUGHUWR building complex production pipelines.
    [Show full text]
  • TSL-1 Appendix B Non-Government
    U.S DEPARTMENT OF ENERGY TECHNICAL STANDARDS PROGRAM TSL-1 APPENDIX B: Non-Government Standards (NGS) Adopted by DOE 10 AMD 1 Standard for Portable Fire Extinguishers 2012 NESC Handbook National Electrical Safety Code(NESC) Handbook 310.2R-2013 International Concrete Repair Institute (ICRI) Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings Polymer Overlays, and Concrete Repair A 112.18.1M Plumbing Fixture Fittings A 112.19.6 Hydraulic Requirements for Water Closets and Urinals AA SAA-46-516124 Anodized Architectural Aluminum AA Specifications for Aluminum Structures AA STFA-601711 The Surface Treatment and Finishing of Aluminum and Its Alloys AABC National Standard for Total System Balance Air Distribution-Hydronic Systems-Sound-Vibration- Field Surveys for Energy Audits AAHC Standards of the Accreditation Association for Ambulatory Health Care (AAAHC), Core and Adjunct Standards AAMA 1002.10 Aluminum Insulating Storm Products for Windows and Sliding Glass Doors AAMA 1002.9 Voluntary Specifications for Aluminum Combination Storm Windows for External Applications AAMA 101 Voluntary Specifications for Aluminum Prime Windows and Sliding Glass Doors AAMA 101/I.S.2 Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors AAMA 1102.7 Voluntary Specifications for Aluminum Storm Doors AAMA 611 Anodized Architectural Aluminum AAMA 800 Sealant Specifications for Use with Architectural Aluminum AASHTO AAB Above and Beyond – The Environmental and Social Contributions of America’s Highway Programs
    [Show full text]
  • Rlxe4ge24modms Hardened Layer 3 Managed 10 Gigabit Modular Ethernet Switch
    INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS HARDENED LAYER 3 MANAGED 10 GIGABIT MODULAR ETHERNET SWITCH The ComNet RLXE4GE24MODMS is a Layer-3 modular managed redundant ring configurable Ethernet switch. It has four slots that can accommodate individual modules that feature different combinations of SFP and electrical TX ports. One of the slots can accommodate a 10 gigabit module with either 2 or 4 10 Gbps or 1 Gbps SFP ports. The switch is designed for security, ITS, power substation and rolling stock applications, and is fully compliant with the requirement of IEC 61850-3 and IEEE 1613 as well as NEMA TS1/TS2. The RLXE4GE24MODMS switch supports multiple Ethernet Redundancy protocols, including C-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible). This switch can protect critical applications from network interruptions or temporary malfunctions with its fast recovery technology. This environmentally hardened switch is designed for direct deployment in difficult out-of-plant or roadside operating environments. INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS Contents About This Guide 6 Related Documentation 6 About ComNet 6 Website 6 Support 6 Safety 6 Overview 7 Introduction 7 Software Features 8 Hardware Features 9 Hardware Installation 10 Installing RJ-45 Module in RLXE4GE24MODMS 10 Installing SFP Module in RLXE4GE24MODMS 10 Installing 10 Gbps SFP+ Module in RLXE4GE24MODMS 11 Installing Power Module in RLXE4GE24MODMS 11 Hardware Overview 12 Front Panel 12 Power Panel 14 Rack mount kit assembly
    [Show full text]
  • A Survey of Channel Measurements and Models
    A Survey of Channel Measurements and Models for Current and Future Railway Communication Systems Paul Unterhuber, Stephan Pfletschinger, Stephan Sand, Mohamed Soliman, Thomas Jost, Aitor Arriola, Inaki Val, Cristina Cruces, Juan Moreno, Juan Pablo Garcia-Nieto, et al. To cite this version: Paul Unterhuber, Stephan Pfletschinger, Stephan Sand, Mohamed Soliman, Thomas Jost, et al.. A Survey of Channel Measurements and Models for Current and Future Railway Com- munication Systems. Mobile Information Systems, Hindawi/IOS Press, 2016, 2016, pp.7308604. 10.1155/2016/7308604. hal-01578998 HAL Id: hal-01578998 https://hal.archives-ouvertes.fr/hal-01578998 Submitted on 30 Aug 2017 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Hindawi Publishing Corporation Mobile Information Systems Volume 2016, Article ID 7308604, 14 pages http://dx.doi.org/10.1155/2016/7308604 Review Article A Survey of Channel Measurements and Models for Current and Future Railway Communication Systems Paul Unterhuber,1 Stephan Pfletschinger,1 Stephan Sand,1 Mohammad Soliman,1 Thomas Jost,1 Aitor Arriola,2 Iñaki Val,2 Cristina Cruces,2 Juan Moreno,3 Juan Pablo García-Nieto,3 Carlos Rodríguez,3 Marion Berbineau,4 Eneko Echeverría,5 and Imanol Baz5 1 German Aerospace Center (DLR), Oberpfaffenhofen, 82234 Wessling, Germany 2IK4-IKERLAN, Arizmendiarrieta 2, 20500 Mondragon, Spain 3MetrodeMadrid(MDM),CalleCavanilles58,28007Madrid,Spain 4Universite´ Lille Nord de France, IFSTTAR, COSYS, 59650 Villeneuve d’Ascq, France 5Construcciones y Auxiliar de Ferrocarriles (CAF), J.M.
    [Show full text]
  • The Design of an IEEE 1588 End-To-End Transparent Ethernet Switch
    The Design of an IEEE 1588 End-to-end Transparent Ethernet Switch by Caleb Gordon A thesis submitted to the Victoria University of Wellington in fulfilment of the requirements for the degree of Master of Science in Electronic and Computer Systems Engineering. Victoria University of Wellington 2008 Abstract In measurement and control systems there is often a need to synchronise distributed clocks. Traditionally, synchronisation has been achieved using a dedicated medium to convey time information, typically using the IRIG-B serial protocol. The precision time protocol (IEEE 1588) has been designed as an improvement to current methods of synchronisation within a dis- tributed network of devices. IEEE 1588 is a message based protocol that can be implemented across packet based networks including, but not lim- ited to, Ethernet. Standard Ethernet switches introduce a variable delay to packets that inhibits path delay measurements. Transparent switches have been introduced to measure and adjust for packet delay, thus removing the negative effects that these variations cause. This thesis describes the hardware and firmware design of an IEEE 1588 transparent end-to-end Ethernet switch for Tekron International Ltd based in Lower Hutt, New Zealand. This switch has the ability to monitor all Ethernet traffic, identify IEEE 1588 timing packets, measure the delay that these packets experience while passing through the switch, and account for this delay by adjusting a time-interval field of the packet as it is leaving the switch. This process takes place at the operational speed of the port, and without introducing significant delay. Time-interval measurements can be made using a high-precision timestamp unit with a resolution of 1 ns.
    [Show full text]
  • Standards Action Layout SAV3718.Fp5
    PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 37, #18 May 5, 2006 Contents American National Standards Call for Comment on Standards Proposals ................................................ 2 Call for Comment Contact Information ....................................................... 10 Final Actions.................................................................................................. 12 Project Initiation Notification System (PINS).............................................. 13 International Standards ISO Draft Standards ...................................................................................... 20 ISO and IEC Newly Published Standards.................................................... 21 Registration of Organization Names in the U.S............................................ 23 Proposed Foreign Government Regulations................................................ 23 Information Concerning ................................................................................. 24 American National Standards Call for comment on proposals listed This section solicits public comments on proposed draft new American National Standards, including the national adoption of Ordering Instructions for "Call-for-Comment" Listings ISO and IEC standards as American National Standards, and on 1. Order from the organization indicated for the specific proposals to revise, reaffirm or withdraw approval of existing proposal. American National Standards. A draft standard is listed
    [Show full text]