NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030020006/Advanced English 1 Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective I 3 0 3 3 3 English Compulsory Semester Course Plan Week Topics 1 Reading skills
2 Reading skills
3 Reading skills
4 Reading skills
5 Organizational skills
6 Organizational skills
7 Vocabulary Skills
8 Vocabulary Skills
9 Writing Skills
10 Writing Skills
11 Writing Skills
12 Writing Skills
13 Speaking
14 Speaking
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code and Name: Department: 0030020004/Basic Computer Technology Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective
1 2 3 2 2 Turkish Compulsory I Semester Course Plan Week Topics 1 Introduction to information and computer literacy 2 Basic concepts in information technology 3 Human computer interaction
4 File and directory management
5 Digital Information Resources
6 Information quality assessment and ethical/legal issues
7 Information quality assessment and ethical/legal issues
8 Data analysis
9 Data analysis
10 Presentation
11 Computer maintenance, security and problem solving
12 Multimedia
13 Multimedia
14 Multimedia
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code and Name: Department: 0030020005/Computer Aided Drafting Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective I 3 1 4 3.5 4 Turkish Compulsory Semester Course Plan Week Topics 1 Selection of drawing instruments. Engineering lettering 2 Selection of drawing instruments. Engineering lettering 3 Essential geometrical constructions. Joining of arcs Principless of orthographic projection. Projection of principal views from three dimensional 4 models. 5 Drawing techniques for basic manufacturing processes and standard features
6 Projection of third principal view from two given principal views. Free-hand drawing techniques
7 Theory of pictorial drawing with several varitions. Isometric projection and drawing
8 Oblique drawing with several variations
9 Principles of sectioning. Full and half sections
10 Further principles of sectioning, broken-out, rotated and removed sections
11 Conventional practices for sections for sections, intersections, fillets, rounds and breaks
12 Principles of dimensioning
13 Screw threads and fasteners. Nomenclature, types and conventional representation
14 Simple assemblies
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030020001/General Chemistry Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective I 3 2 5 4 5 Turkish Compulsory Semester Course Plan Week Topics 1 Atomic and Electronic Structure 2 Chemical Bonding 3 Chemical Bonding
4 Intermolecular Attractions and Properties of Liquids and Solids
5 Solutions
6 Thermodynamics
7 Chemical, and Acid-Base Equilibria, Solubility and Simultaneous Equilibria
8 Chemical, and Acid-Base Equilibria, Solubility and Simultaneous Equilibria
9 Metal Complexes and Their Role in Chemistry
10 Organic Compounds, Polymers and Biochemicals
11 Organic Compounds, Polymers and Biochemicals
12 Nuclear Reactions and Their Role in Chemistry
13 Kinetics
14 Kinetics
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code and Name: Department: 0030020013/Introduction to Aeronautical Aeronautical Engineering Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective
2 0 2 2 2 English Compulsory I Semester Course Plan Week Topics 1 Introduction, Aeronautical Engineering education at NEU 2 Development of the aeronautics in the World 3 Development of the aeronautics in Turkey, Current potential
4 Aircrafts and the main elements, Types of aircraft
5 Aerostatic, Atmosphere, Aerostatic lift
6 Forces on aircraft. Aerodynamic force and moment
7 Aircraft wings, Lift, drag and pitching moment
8 Tail surfaces, Command surfaces
9 Tail surfaces, Command surfaces
10 Aircraft body, power plant, landing gears
11 Aircraft pressurization, climate and heating systems
12 Other air vehicles
13 Engineering ethics
14 Ethic codes
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code and Name: Department: 0030020002/Mathematics I Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective
4 2 6 5 8 Turkish Compulsory I Semester Course Plan Week Topics 1 Functions, Limits, continuity and derivatives. Applications 2 Functions, Limits, continuity and derivatives. Applications 3 Functions, Limits, continuity and derivatives. Applications
4 Extreme values, the Mean Value Theorem and its applications.
5 Sketching graphs.
6 The definite integral.
7 Area and volume as integrals.
8 The indefinite integral.
9 The indefinite integral.
10 Integration by substitution.
11 Logarithm, exponential, inverse trigonometric functions and their derivatives.
12 Logarithm, exponential, inverse trigonometric functions and their derivatives.
13 L'Hopital's rule.
14 L'Hopital's rule.
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code and Name: Department: 0030020014/Orientation Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective Compulsory 0 0 0 1 1 Turkish I Elective Semester Course Plan Week Topics 1 Introduction 2 Brief history of NEU 3 Departments of NEU
4 Engineering Department of NEU
5 Aeronautical Engineering Department of NEU
6 Aeronautical Engineering Department of NEU
7 Visit to Library
8 Visit to Departments of NEU
9 Visit to Engineering Department of NEU
10 Visit to Aeronautical Engineering Department of NEU
11 Visit to Labs
12 Visit to Konya
13 Visit to Konya
14 Visit to Konya
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code and Name: Department: 0030020003/Physics I Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective
3 2 5 4 5 English Compulsory I Semester Course Plan Week Topics 1 Measurement 2 Motion in One Dimension 3 Vectors
4 Motion in Two and Three Dimensions
5 Force and Motion
6 Force and Motion
7 Work and energy
8 Conservation of Energy
9 Conservation of Energy
10 System of particles
11 Collisions
12 Rotational motion
13 Equilibrium and elasticity
14 Oscillations
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030020012/Advanced English-II Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective II 3 0 3 3 3 English Compulsory Semester Course Plan Week Topics 1 Language skills 2 Language skills 3 Language skills
4 Reading skills
5 Reading skills
6 Reading skills
7 Reference skills
8 Reference skills
9 Writing skills
10 Writing skills
11 Writing skills
12 Writing skills
13 Writing skills
14 Writing skills
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030020011/Introduction to Aircraft Aeronautical Engineering Performance Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective II 3 0 3 3 5 English Compulsory Semester Course Plan Week Topics 1 Elements of A/C 2 Forces and Moments acting on an A/C 3 Forces and Moments acting on an A/C
4 A/C Performance
5 A/C Performance
6 Horizontal Flight
7 Climb Performance
8 Takeoff Performance
9 Gliding and Descent Performance
10 Landing Performance
11 Range, Endurance and Payload
12 Range, Endurance and Payload
13 Envelopes
14 Longitudinal Static Stability (L.S.S.)
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030020007/Introduction to Computer Aeronautical Engineering Programming Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective II 2 2 4 3 4 Turkish Compulsory Semester Course Plan Week Topics 1 Introduction to Computers 2 Introduction to programming 3 Elements of Fortran
4 Elements of Fortran
5 Elements of Fortran
6 Control Statements and Loops
7 Control Statements and Loops
8 DO Loops
9 DO Loops
10 Arrays and Subscripted Variables
11 Arrays and Subscripted Variables
12 Arrays and Subscripted Variables
13 Subprograms
14 Subprograms
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030020009/Mathematics-II Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective II 4 2 6 5 7 Turkish Compulsory Semester Course Plan Week Topics 1 Sequences and Convergence of Infinite Series 2 Sequences and Convergence of Infinite Series 3 Convergence Tests
4 Convergence Tests
5 Alternating Series. Power Series. Taylor and Binomial Serie
6 Coordinates and Vectors in Space.Vector Products. Lines and Planes
7 Coordinates and Vectors in Space.Vector Products. Lines and Planes
8 Tangents and Normals. Functions of Several Variables. Limits and Continuity.
9 Tangents and Normals. Functions of Several Variables. Limits and Continuity.
10 Partial Derivatives.The Chain Rule.
11 The Directional Derivative. Extreme Values.
12 Lagrange Multipliers.
13 Double Integrals.
14 Triple Integral in Cartesian, Cylindrical and Spherical Coordinates.
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030020010/Physics-II Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective II 3 2 5 4 5 English Compulsory Semester Course Plan Week Topics 1 Electric Charge 2 Electric Field 3 Electric Field
4 Gauss's Law
5 Gauss's Law
6 Electric Potential
7 Electric Potential
8 Capacitance
9 Current and Resistance
10 Circuits
11 Magnetic Fields
12 Magnetic Fields due to Currents
13 Induction and Inductance
14 Electromagnetic Oscillations and AC current
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030020015/Social Responsibility and Aeronautical Engineering Healthy Life Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective Compulsory II 0 0 0 1 1 Turkish Elective Semester Course Plan Week Topics 1 Concept of Responsibility 2 Concept of Responsibility 3 Personal Responsibility
4 Social Responsibility
5 Social Responsibility
6 Social Responsibility Project
7 Social Responsibility Project
8 Social Responsibility Project
9 Social Responsibility Project
10 Social Responsibility Project
11 Health
12 Health
13 Health
14 Health
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030020008/Statics Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective II 3 0 3 3 5 English Compulsory Semester Course Plan Week Topics 1 Introduction-Statics of Particles 2 Sequences and Convergence of Infinite Series 3 Rigid Bodies: Equivalent System of Forces
4 Equilibrium of Rigid Bodies
5 Equilibrium of Rigid Bodies
6 Distributed Forces
7 Distributed Forces
8 Analysis of Structures
9 Analysis of Structures
10 Forces in Beams and Cables
11 Forces in Beams and Cables
12 Friction
13 Friction
14 Distributed forces: Moments of Inertia
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022003/Dynamics Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 3 3 0 3 3 5 English Compulsory Semester Course Plan Week Topics 1 Introduction- Kinematics of Particles 2 Kinematics of Particles 3 Kinetics of Particles: Newton's Second Law
4 Kinetics of Particles: Energy and Momentum Methods
5 Kinetics of Particles: Energy and Momentum Methods
6 Systems of Particles
7 Kinematics of Rigid Bodies (in 2-D)
8 Plane Motion of Rigid Bodies: Forces and Accelerations
9 Plane Motion of Rigid Bodies: Forces and Accelerations
10 Plane Motion of Rigid Bodies: Energy and Momentum Methods
11 Plane Motion of Rigid Bodies: Energy and Momentum Methods
12 Kinematics of Rigid Bodies (in 3-D)
13 Kinetics of Rigid Bodies in Three Dimensions
14 Kinetics of Rigid Bodies in Three Dimensions
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022005/Lineer Algebra Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 3 3 0 3 4 6 Turkish Compulsory Semester Course Plan Week Topics Introduction to vectors, vector spaces and linear algebra, linear independence, basis, orthogonality, 1 vector norms 2 Introduction to linear independence, basis, orthogonality, vector norms Vector calculus: Review of vector differentiation, fundamentals of differential geometry, Frennet - 3 Serret formulas 4 Gradient, divergence and curl.
5 Line, surface, volume integral
6 Integral theorems: Green, Gauss and Stokes' theorems-Part II Fundamentals of Linear Algebra Matrices , algebra of matrices, special matrices, derivative of a matrix elementary row and column 7 operations, echelon forms, rank and norm of matrices, inverse of a matrix by elementary matrix operations. Matrices , algebra of matrices, special matrices, derivative of a matrix elementary row and column 8 operations, echelon forms, rank and norm of matrices, inverse of a matrix by elementary matrix operations. 9 Determinant, volume change factor, inverse of matrix by adjoint of a matrix. System of equations, consistent and inconsistent systems, complete solution of a system of 10 equations by Gauss elimination: Gauss and Gauss Jordan methods 11 Linear transformations and change of basis
12 Linear transformations and change of basis Characteristic value problems and related theorems. belonging and associated eigenvalues, 13 applications: diagonalization, quadratic forms and differential equations Characteristic value problems and related theorems. belonging and associated eigenvalues, 14 applications: diagonalization, quadratic forms and differential equations
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022006/Principles of Materials Science Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 3 3 0 3 3 4 English Compulsory Semester Course Plan Week Topics 1 Introduction 2 Atomic Structure and interatomic bonding 3 Structure of cyristalline solids
4 Imperfections in solids
5 Diffusion
6 Mechanical properties of materials
7 Mechanical properties of materials
8 Dislocations and Strengthening mechanisms
9 Dislocations and Strengthening mechanisms
10 Dislocations and Strengthening mechanisms
11 Failure (Fracture, Fatique, Creep)
12 Corrosion and drgradation of materials
13 Electrical and thermal properties
14 Electrical and thermal properties
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022004/Strength of Materials Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 3 4 0 4 4 6 English Compulsory Semester Course Plan Week Topics 1 Introduction 2 Pure Axial Loading 3 Pure Axial Loading
4 Pure Torsion
5 Pure Torsion
6 Pure Bending
7 Pure Bending
8 Transverse Loading (or Bending with Shear)
9 Transverse Loading (or Bending with Shear)
10 Eccentric Axial Loading and Bending- Unsymmetric Bending
11 General Combined Loadings(Axial Loading+Torsion+Bending)
12 Stress Transformations
13 Deflection (Elastic Curve) in Beams - (Determinate and Indeterminate Problems)
14 Strain Energy
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022002/Thermodynamics Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 3 4 0 4 4 5 Turkish Compulsory Semester Course Plan Week Topics 1 Basic concepts of thermodynamics 2 First law, closed systems 3 Properties of pure substances and ideal mixtures
4 Properties of pure substances and ideal mixtures
5 First law, control volume
6 First law, control volume
7 Second law
8 Entropy
9 Entropy
10 Exergy analysis
11 Exergy analysis
12 Power and refrigeration systems
13 Power and refrigeration systems
14 Power and refrigeration systems
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022007/Turkish Language-I Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 3 2 0 2 2 2 Turkish Compulsory Semester Course Plan Week Topics 1 Definition of Language and the Significance of Language in Social Life 2 The Relationship Between Language and Thought 3 The Relationship Between Language and Culture/Society
4 The Origin of Languages. World Languages
5 The Situation and Significance of Turkish Language among the World Languages
6 The History and Development of Turkish Language
7 The History and Development of Turkish Language
8 The Structure of Turkish Language
9 The Situation of Todays Turkish Language
10 Written Language (grammar aspect)
11 Written Language (meaning aspect)
12 Turkish as a Scientific Language
13 Poetry Language and Turkish Poetry
14 Poetry Language and Turkish Poetry
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022012/Academic Oral Presentation Aeronautical Engineering Skills Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 4 3 0 3 3 3 English Compulsory Semester Course Plan Week Topics 1 Reading Skills 2 Reading Skills 3 Vocabulary Skills
4 Writing Skills
5 Writing Skills
6 Speaking
7 Speaking
8 Speaking
9 Speaking
10 Listening
11 Developing oral/aural skills
12 Developing oral/aural skills
13 Developing oral/aural skills
14 Developing oral/aural skills
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022016/Air Transportation Management Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 4 3 0 3 3 3 Turkish Elective Semester Course Plan Week Topics Aviation Alphabet, terminology, abbreviations, aviation authorities (such as SHGM, FAA, 1 EASA, etc.), foundations and associations related with aviation 1,8 and aviation rules 2 Introduction to Airline Planning Processes and Systems / Airline Economics 2,5,8 Review 3 Operating Costs and Productivity / Load and Spill Analysis
4 Airline Schedule Development / Passenger Choice Models
5 Fleet Assignment Optimization / Services supplied for A/C - groundtime
6 Route Planning and Network Strategies
7 Scheduling and Operational Constraints
8 Airline Fleet Planning Models - Network planning, crew planning, fleet / 2 aircraft assignment
9 Revenue Management Concept and Models – Flight Overbooking: Models
10 Network Optimization Models / Network revenue management
11 Airline Pricing Structures and Strategies, reservation, schedule, fare, ticket
12 Airline Revenue Management Systems
13 Maintenance services
14 Other services such as cargo, catering, onboard services etc...
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022017/Aircraft Maintenance Management Aeronautical Engineering Local Course Type: Semester Lecture Tutorial Total ECTS Course Credi Compulsory/ Hours Hours Hours Credits Language ts Elective 4 3 0 3 3 4 Turkish Elective Semester Course Plan Week Topics 1 General Information About Human Factor 2 Vision, Hearing and Human Performance and 3 Responsibility
4 Culture: Team Work
5 Leadership
6 Work Leadership
7 Health
8 Pkysical Environment
9 Work Load
10 Sleeplessness
11 Communication
12 Error Models
13 Error Models
14 Error Models
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022009/Applied Elasticity Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 4 4 0 4 3 5 English Compulsory Semester Course Plan Week Topics 1 Analysis of Stress in 2-D and 3-D 2 Analysis of Stress in 2-D and 3-D 3 Strain and Stress-Strain Relations
4 Strain and Stress-Strain Relations
5 Energy Methods
6 Energy Methods
7 Two-dimensional Problems in Elasticity
8 Two-dimensional Problems in Elasticity
9 Two-dimensional Problems in Elasticity
10 Torsion of Non-circular Bars
11 Torsion of Non-circular Bars
12 Axisymmetrically Loaded Members
13 Axisymmetrically Loaded Members
14 Axisymmetrically Loaded Members
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022008/Fluid Mechanics Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 4 4 0 4 4 6 English Compulsory Semester Course Plan Week Topics 1 Introduction 2 Kinematics of Fluid Motion 3 Kinematics of Fluid Motion- Basic Principles and Methods of Analysis
4 Governing Equations
5 Governing Equations
6 Governing Equations
7 Governing Equations
8 Governing Equations
9 Fluid Statics
10 Fluid Statics
11 Flow of real fluids
12 Flow of real fluids
13 Flow of real fluids
14 Flow of real fluids
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022011/Fundamentals of Electrical and Aeronautical Engineering Electronics Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 4 3 0 3 3 5 English Compulsory Semester Course Plan Week Topics 1 Electrical quantities, passive sign convention 2 Resistive circuits, Kirchhoff's laws 3 Dependent and independent sources, operational amplifiers
4 Nodal and mesh analysis
5 Nodal and mesh analysis
6 Linearity, superposition, Thevenin and Norton equivalents
7 Capacitors and inductors
8 Sinusoidal steady-state circuit analysis
9 Active and reactive power, power factor
10 Three-phase circuits
11 Magnetic circuits, transformers
12 Electromechanical energy conversion
13 Isolating and load break switches, circuit breakers- Selection of cables
14 Brief introduction of diodes and transistors- Electrical safety, and grounding
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022014/General Economy Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 4 3 0 3 3 3 Turkish Elective Semester Course Plan Week Topics 1 Economic theories and social transformations 2 Economic Analysis in the 18th century: Physiocracy Laissez-faire economics: Adam Smith as a system builder Economic Policies and Social 3 Transformations after the II. World War 4 19th century economic analysis and policies: Robert Malthus, David Ricardo, JeanBaptiste Say
5 19th century economic analysis and policies: John Stuart Mill Economic transformation in 19th century and its social critics: Sismondi, Fourier, Owen, Saint- 6 Simon 7 Critical Political Economy: Karl Marx
8 1929 Great Depression and Social Transformations:John Maynard Keynes
9 Economic Policies after the IInd World War and Its Social Effects
10 Economic Crisis in the 1970s and its social effects
11 Liberal and Neoliberal Conception of economy and society
12 Economic Policies and Institutional Transformations in the Neoliberal period
13 Economic Policies and Social Transformations in the Neoliberal period
14 Economic Crisis and analysis of crisis
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code and Name: Department: 0030022010/Numerical Methods Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 4 3 0 3 3 5 English Compulsory Semester Course Plan Week Topics 1 Introduction: Taylor series expansions, Error definitions Numerical solution of ODE's: Initial value problems, Euler's method, Runga-Kutta methods, 2 Systems of ODEs, Higher order ODEs Numerical solution of ODE's: Initial value problems, Euler's method, Runga-Kutta methods, 3 Systems of ODEs, Higher order ODEs Numerical solution of ODE's: Initial value problems, Euler's method, Runga-Kutta methods, 4 Systems of ODEs, Higher order ODEs 5 Numerical solution of PDE's: Model equations
6 Finite Volume Method: Integral conservation laws, Evaluation of fluxes
7 Finite Volume Method: Integral conservation laws, Evaluation of fluxes
8 Finite Difference Method: Finite Difference approximations, consistency, stability, convergence
9 Finite Difference Method: Finite Difference approximations, consistency, stability, convergence
10 Finite Difference Method: Finite Difference approximations, consistency, stability, convergence Solution of parabolic PDEs: Explicit methods, Implicit methods, Crank-Nicolson method, 11 Alternating Direction Implicit Solution of parabolic PDEs: Explicit methods, Implicit methods, Crank-Nicolson method, 12 Alternating Direction Implicit Solution of elliptic PDEs: Jacobi iteration method, Successive Line Over-Relaxation Method 13 (SLOR) Solution of hyperbolic PDEs: Upwind differencing, Crank-Nicolson method, Dissipation and 14 dispersion errors, Artificial viscosity
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022015/Occupational Health and Safety Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 4 3 0 3 3 3 Turkish Elective Semester Course Plan Week Topics 1 Code of Practice in Occupational Health and Safety 2 Code of Practice in Occupational Health and Safety 3 Code of Practice in Occupational Health and Safety
4 Prevention of Risk at Workplace
5 Prevention of Risk at Workplace
6 Prevention of Risk at Workplace
7 Prevention of Risk at Workplace
8 Security at Workplace
9 Security at Workplace
10 Security at Workplace
11 Security at Workplace
12 Importance of Security Culture
13 Importance of Security Culture
14 Importance of Security Culture
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030022013/Turkish Language-2 Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 4 2 0 2 2 2 Turkish Compulsory Semester Course Plan Week Topics 1 General Information about Writing 2 Planning and Methodology of Writing 3 Writing Excercise
4 Scientific Research Texts (Article-Report-Critic etc.)
5 Official Writings (Petition-Resume etc.)
6 Genres of Literature
7 Essay, Column
8 Travel Writing, Biography
9 Story
10 Novel
11 Verbal Expressions and Verbal Literature
12 General Information about Verbal Communication
13 Conference, Panel, Symposium
14 Conference, Panel, Symposium
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023001/Aerodynamics-1 Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 5 3 2 5 4 6 English Compulsory Semester Course Plan Week Topics 1 Dimensional Analysis and Similitude 2 Dimensional Analysis and Similitude 3 Potential Flow Theory
4 Potential Flow Theory
5 Conformal Mapping and Kutta-Joukovsky transformation
6 Conformal Mapping and Kutta-Joukovsky transformation
7 Thin Airfoil Theory
8 Thin Airfoil Theory
9 Thin Airfoil Theory
10 Thin Airfoil Theory
11 Finite Wing and Lifting Line Theory
12 Finite Wing and Lifting Line Theory
13 Finite Wing and Lifting Line Theory
14 Finite Wing and Lifting Line Theory
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023003/Aerospace Structures Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 5 3 0 3 3 6 English Compulsory Semester Course Plan Week Topics 1 Introduction: Main structural elements in aircraft and spacecraft, their functions. Torsion of open sections. Flexural analysis of tapered and non-tapered open-section beams: stiffener 2 loads, web shear flows, shear center. Flexural analysis of tapered and non-tapered open-section beams: stiffener loads, web shear flows, 3 shear center. Flexural and torsional analysis of tapered and non-tapered wing and fuselage and spacecraft 4 structures as closed-section multi cell box beams. Usual assumptions for such structures in the analysis of stiffener loads, shear flow, shear center and angle of twist. Flexural and torsional analysis of tapered and non-tapered wing and fuselage and spacecraft 5 structures as closed-section multi cell box beams. Usual assumptions for such structures in the analysis of stiffener loads, shear flow, shear center and angle of twist. Flexural and torsional analysis of tapered and non-tapered wing and fuselage and spacecraft 6 structures as closed-section multi cell box beams. Usual assumptions for such structures in the analysis of stiffener loads, shear flow, shear center and angle of twist. 7 Bending of unsymmetrical sections with emphasis on unsymmetrical wing-box cross-sections. 8 Analysis of wing ribs and remarks on fuselage and spacecraft frames and rings. The stability of long and short columns: Euler buckling; inelastic buckling, dimensionless stress 9 strain curves as applied to aircraft materials. The stability of long and short columns: Euler buckling; inelastic buckling, dimensionless stress 10 strain curves as applied to aircraft materials. The stability (local buckling) of wing and fuselage skin panels as flat and curved plates under 11 compression, bending, shear, and combined loading; local buckling of round tubes. The stability (local buckling) of wing and fuselage skin panels as flat and curved plates under 12 compression, bending, shear, and combined loading; local buckling of round tubes. Post-buckling behavior of stiffened flat and curved plates : effective width concept used in the 13 analysis of wing and fuselage skin panels. Failure criteria for isotropic brittle and ductile materials. Yield and ultimate strength in bending, Cozzone method.Ultimate strength of round tubes in bending 14 and torsion; combined loading of round tubes.
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023004/Heat Transfer Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 5 3 0 3 3 4 Turkish Compulsory Semester Course Plan Week Topics 1 Introduction 2 Introduction to Conduction 3 One-Dimensional, Steady-State Conduction
4 Two-Dimensional, Steady-State Conduction
5 Transient Conduction
6 Transient Conduction
7 Introduction to Convection
8 External Flow
9 Internal Flow
10 Free Convection
11 Heat Exchangers
12 Radiation: Processes and Properties
13 Radiation: Processes and Properties
14 Radiation Heat Exchange Between Surfaces
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023006/History of Turkish Revolution I Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 5 2 0 2 2 2 Turkish Compulsory Semester Course Plan Week Topics Introduction and explanation from political, socio- 1 economic and cultural point of view of 1 concepts and processes like revolution. General evaluation of the world’s important political, social, economic and cultural improvements in the 1-2 line of Western modernization in 18-19th centuries: After Geographical Discoveries; 2 Europe, improvement of bourgeois and capitalism, French Revolution, Vienna Congress and building up of political balance of alliance in Europe Study of Ottoman Empire’s political, economic and social situation in existing world order, by 3 general 1 survey of the system and the model of society of Ottoman Empire in 18-19th centuries 4 Factors and the period leading to Turkish Revolution 5 Factors and the period leading to Turkish Revolution 6 Factors and the period leading to Turkish Revolution The end of the age of empires: The 1st World War, Ottoman Empire during war years and Armenian 7 1 affair. Building up new world order in place of the system of empires and drifting towards nationstates After Moudros Ceasefire: Ottoman Government and General Mustafa Kemal, resistance movements 8 1 against invasion in Anatolia and Kuvva-yı Milliye (National Forces), local congress powers 9 General Mustafa Kemal coming to Samsun and efforts to organize, based on congresses-I. 10 General Mustafa Kemal coming to Samsun and organizing efforts, based on congresses-II 11 Organizing activities which leads to the formation of TBMM (the Turkish National Assembly) 12 War of Independence and Mudanya Ceasefire. Foreign policy during National Struggle years: Relations with Soviet Russia, England, France, Italy 13 and 1 the USA Results of Anatolia/Ankara’s struggle stateside and abroad: Abolish of sultanate and Laussane Peace 14 1 Agreement.
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023002/Machine Elements Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 5 3 0 3 3 5 Turkish Compulsory Semester Course Plan Week Topics 1 Introduction, casting 2 Introduction, casting Metal working; general description, hot working processes, cold working processes (squeezing, 3 bending, drawing, shearing) Metal working; general description, hot working processes, cold working processes (squeezing, 4 bending, drawing, shearing) Metal working; general description, hot working processes, cold working processes (squeezing, 5 bending, drawing, shearing) 6 Video show: Several Manufacturing processes Chip removal; general description, shaping and planing, drilling and reaming, turning and related 7 operations, milling, broaching, gear cutting, abrasive machining Chip removal; general description, shaping and planing, drilling and reaming, turning and related 8 operations, milling, broaching, gear cutting, abrasive machining Chip removal; general description, shaping and planing, drilling and reaming, turning and related 9 operations, milling, broaching, gear cutting, abrasive machining 10 Non-traditional machining processes
11 Welding
12 Manufacturing systems and automation
13 CAD/CAM/ROBOTICS CENTER Visit Machineshop demo; Lathe work, Milling machine practice, Sheet metal forming practice, Arc and 14 gas welding practices, Bench work
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023009/Photograhy Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 5 2 0 2 2 2 Turkish Elective Semester Course Plan Week Topics 1 General Introduction to photography 2 Light as a substantial condition of photography and its attributes 3 Use of Light
4 Values influencing the composition of photography
5 Lenses as different and effective eyes
6 Visualization of a subject
7 Photography is an original expression
8 Photography and human
9 Photography is abstraction
10 The relation between photography and art history
11 Tutorial
12 Reading photography
13 Dark room in photography
14 Dark room in photography
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023005/System Dynamics Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 5 3 0 3 3 4 English Compulsory Semester Course Plan Week Topics 1 Introduction 2 Laplace Transformation 3 Transfer Functions and Block Diagrams
4 Modelling of Physical Systems
5 Modelling of Physical Systems
6 Linearization of nonlinear systems
7 Linearization of nonlinear systems
8 Response of mathematical models to test signals
9 Stability of Linear Time Invariant systems
10 Stability of Linear Time Invariant systems
11 Performance specifications in time domain
12 Introduction to automatic control system design in time domain
13 Frequency response of linear time invariant systems
14 Frequency response of linear time invariant systems
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023013/Aerodynamics-2 Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 6 3 2 5 4 6 English Compulsory Semester Course Plan Week Topics 1 Introduction and Review of Thermodynamics 2 Steady One Dimensional Compressible Flow 3 Normal Shock Waves
4 Obliques Shock waves
5 Expansion waves
6 Subsonic Compressible Flow Over Airfoils, Linear Theory
7 Subsonic Compressible Flow Over Airfoils, Linear Theory
8 Linearized Supersonic Theory
9 Introduction to Viscous Flow, B/L Equations, Reynolds Number
10 Integral B/L Equations and Solutions
11 Differential B/L Equations Exact and Numerical Solutions for Differential B/L Equations-Transition to Turbulence, Turbulent 12 Flows and Turbulence Models 13 Calculation for Turbulent Flows
14 Calculation of Airfoil Lift and Drag by Viscous/Inviscid Coupling
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023012/Flight Mechanics Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 6 3 0 3 3 6 English Compulsory Semester Course Plan Week Topics 1 Introduction 2 Static Stability and Control - Part 1 3 Static Stability and Control - Part 1
4 Static Stability and Control - Part 1
5 Static Stability and Control - Part 2
6 Static Stability and Control - Part 2
7 Static Stability and Control - Part 2
8 General Equations of Unsteady Motion
9 General Equations of Unsteady Motion
10 The Stability Derivatives
11 Stability of Uncontrolled Motion
12 Stability of Uncontrolled Motion
13 Stability of Uncontrolled Motion
14 Stability of Uncontrolled Motion
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023015/History of Turkish Revolution II Aeronautical Engineering Course Type: Semester Tutorial Total Local ECTS Course Lecture Hours Compulsory/ Hours Hours Credits Credits Language Elective 6 2 0 2 2 2 Turkish Compulsory Semester Course Plan Week Topics Political life in Atatürk period I Announcement of Ankara as capital announcement of Republic 1 abolition of caliphate 2 Political life in Atatürk Period II 1924 1930 3 Political life in Atatürk Period III 1931 1938
4 Foreign Policy in Atatürk Period I 1923 1930
5 Foreign Policy in Atatürk Period II 1931 1938
6 Constitutional progresses and judicial breakthroughs in Atatürk Period
7 Developments of education and culture in Atatürk Period
8 Developments of economy in Atatürk Period
9 Atatürk s Principles I
10 Atatürk s Principles II
11 Atatürk s Principles III
12 Ismet Inönü Period 1938 1950
13 Democrat Party Period 1950 1960
14 Political life in Turkey between 1960 1993
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023014/Manufacturing Processes Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 6 3 0 3 3 4 Turkish Compulsory Semester Course Plan Week Topics 1 Introduction 2 Casting Metal working; general description, hot working processes, cold working processes (squeezing, 3 bending, drawing, shearing) Metal working; general description, hot working processes, cold working processes (squeezing, 4 bending, drawing, shearing) Metal working; general description, hot working processes, cold working processes (squeezing, 5 bending, drawing, shearing) 6 Video show: Several Manufacturing processes Chip removal; general description, shaping and planing, drilling and reaming, turning and related 7 operations, milling, broaching, gear cutting, abrasive machining Chip removal; general description, shaping and planing, drilling and reaming, turning and related 8 operations, milling, broaching, gear cutting, abrasive machining Chip removal; general description, shaping and planing, drilling and reaming, turning and related 9 operations, milling, broaching, gear cutting, abrasive machining 10 Non-traditional machining processes
11 Welding
12 Manufacturing systems and automation
13 CNC
14 CNC
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023010/Mechaninal Vibrations Aeronautical Engineering Total Course Type: Semester Lecture Tutorial Local ECTS Course Hour Compulsory/ Hours Hours Credits Credits Language s Elective 6 3 0 3 3 5 Turkish Compulsory Semester Course Plan Week Topics 1 Free Vibration of Single-Degree-of-Freedom Systems 2 Free Vibration of Single-Degree-of-Freedom Systems 3 Forced Vibration of Single-Degree-of-Freedom Systems
4 Forced Vibration of Single-Degree-of-Freedom Systems
5 Forced Vibration of Single-Degree-of-Freedom Systems
6 Forced Vibration of Single-Degree-of-Freedom Systems
7 Two-Degree-of-Freedom Systems
8 Two-Degree-of-Freedom Systems
9 Two-Degree-of-Freedom Systems
10 Multi-Degree-of-Freedom Systems
11 Multi-Degree-of-Freedom Systems
12 Multi-Degree-of-Freedom Systems
13 Multi-Degree-of-Freedom Systems
14 Introduction to the Continuous Systems
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030023011/Propulsion Systems-1 Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 6 3 2 5 4 6 English Compulsory Semester Course Plan Week Topics 1 Introduction 2 Basic Thrust Equations 3 Propellers, Fans and Rotors
4 Propellers, Fans and Rotors
5 Aerospace Propulsion Thermodynamic Cycles
6 Aerospace Propulsion Thermodynamic Cycles
7 Aerospace Propulsion Thermodynamic Cycles
8 Reacting Mixtures and Combustion
9 Reacting Mixtures and Combustion
10 Gas Turbines
11 Gas Turbines
12 Ramjet and Scramjets
13 Ramjet and Scramjets
14 Rockets
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024002/Aeronautical Engineering Design Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 7 3 0 3 3 7 English Compulsory Semester Course Plan Week Topics 1 Introduction to Aircraft Design 2 Airfoil and Geometry Selection 3 Thrust to Weight Ratio and Wing Loading
4 Initial Sizing
5 Start of Independent Design Projects
6 Configuration Layout and Loft
7 Propulsion and Fuel System Integration
8 Landing Gear and Subsystems
9 Aerodynamics
10 Weights
11 Stability, Control, and Handling Qualities
12 Performance and Flight Mechanics
13 Cost Analysis
14 Sizing and Trade Studies
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024003/Aircraft Instruments and Aeronautical Engineering Measurements ECTS Course Type: Semester Lecture Tutorial Total Local Course Credi Compulsory/ Hours Hours Hours Credits Language ts Elective 7 3 0 3 3 5 English Compulsory Semester Course Plan Week Topics 1 Pitot-static instruments and systems, Air velocity indicators, Mach number 1 indicator 2 Sensors of angle of attack and sideslip angle 3 Pressure sensors, Motor pressure indicators
4 Measurement of rotation moment and thrust
5 Linear and angular acceleration sensors (accelerometers)
6 G-indicator, Accelerometers error
7 Three axis free gyroscope, Two axis integrating gyroscope
8 Laboratory work: Gyroscope demonstration set
9 Altitude measurements, Baroaltimeter, Radar altimeter, Altitude measurement via inertial 5 method
10 Altitude measurements, Baroaltimeter, Radar altimeter, Altitude measurement via inertial 5 method
11 Earth Radio Navigation Systems
12 Doppler frequency, Doppler radar velocity sensors
13 Doppler frequency, Doppler radar velocity sensors
14 Measurement of over ground velocity and side slip angle via Doppler method
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024008/Automatic Control Systems-1 Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 7 3 0 3 3 5 English Elective Semester Course Plan Week Topics Feedback control systems; review of stability, linearization, and performance specifications in 1 time domain Feedback control systems; review of stability, linearization, and performance specifications in 2 time domain Feedback control systems; review of stability, linearization, and performance specifications in 3 time domain root locus plotting techniques, time domain design of feedback systems via root locus, use of 4 compensators root locus plotting techniques, time domain design of feedback systems via root locus, use of 5 compensators root locus plotting techniques, time domain design of feedback systems via root locus, use of 6 compensators 7 PID and PDF control
8 PID and PDF control Bode plot, Nyquist plot, frequency domain analysis of control systems, performance specifications 9 in frequency domain Bode plot, Nyquist plot, frequency domain analysis of control systems, performance specifications 10 in frequency domain Bode plot, Nyquist plot, frequency domain analysis of control systems, performance specifications 11 in frequency domain 12 Introduction to modern control
13 Introduction to modern control
14 Introduction to modern control
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024009/Entrepreneurship Culture Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective Compulsory 7 0 0 0 1 1 Turkish Elective Semester Course Plan Week Topics 1 Introduction to Core Concepts in Entrepreneurship 2 Finding a New Idea; Turning the Idea into a Business Model 3 From Business Model to Business Plan
4 Marketing Plan in Business Planning
5 Production Planning in Business Planning
6 Organizational Plan in Business Planning
7 Financial Plan in Business Planning
8 Business Planning workshop: Forecasting and Scenario Analysis
9 Business Planning workshop: Legal Issues
10 Current Issues in Entrepreneurship
11 Communicating with Business People
12 Communicating Business Plans
13 Entrepreneurship Examples from Turkey
14 Investor Perspective
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024005/Finite Element Methods in Aeronautical Engineering Aerospace Structures Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 7 3 0 3 3 5 English Elective Semester Course Plan Week Topics 1 Introduction to finite element method, discrete systems 2 Continuous systems, differential formulation 3 Weighted residual methods, Ritz method, error analysis
4 One dimensional elements, rods
5 One dimensional elements, beams
6 Trusses and frames
7 Trusses and frames
8 2D Plane stress problems, constant strain triangle
9 2D Plane stress problems cont., four-node quadrilateral element
10 Axisymmetrical solids
11 Dynamical analysis
12 Dynamical analysis
13 Implementation of methods in computer programs
14 Implementation of methods in computer programs
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024006/Hypersonic Flows Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 7 3 0 3 3 5 English Elective Semester Course Plan Week Topics 1 General characterization of hypersonic flow 2 General characterization of hypersonic flow 3 General characterization of hypersonic flow
4 Inviscid hypersonic flow
5 Inviscid hypersonic flow
6 Inviscid hypersonic flow
7 Inviscid hypersonic flow
8 Viscous hypersonic flow
9 Viscous hypersonic flow
10 Viscous hypersonic flow
11 Viscous hypersonic flow
12 High temperature effects
13 High temperature effects
14 High temperature effects
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024007/Introduction to Atmospheric Aeronautical Engineering Physics-1 Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 7 3 0 3 3 5 English Elective Semester Course Plan Week Topics 1 Gravitational Effects 2 Gravitational Effects 3 Gravitational Effects
4 Gravitational Effects
5 Properties of Atmospheric Gases
6 Properties of Atmospheric Gases
7 Properties of Atmospheric Gases
8 Properties and Behaviour of Cloud Particles
9 Properties and Behaviour of Cloud Particles
10 Properties and Behaviour of Cloud Particles
11 Solar and Terrestrial Radiation
12 Solar and Terrestrial Radiation
13 Solar and Terrestrial Radiation
14 Solar and Terrestrial Radiation
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024001/Propulsion Systems-2 Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 7 3 0 3 3 5 English Compulsory Semester Course Plan Week Topics 1 Ideal cycle analysis of jet engines 2 Review of Method of Characteristics-Component performance 3 Non-ideal cycle analysis
4 Inlet and nozzles
5 Inlet and nozzles
6 Compressors
7 Compressors
8 Compressors-Turbines
9 Turbines
10 Combustion chamber (1-D flow with friction, 1-D flow with heat addition)
11 Engine off-design performance
12 Engine off-design performance
13 Basics of engine control
14 Environmental effect
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024012/Aircraft Engine Design Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 8 3 0 3 3 6 English Elective Semester Course Plan Week Topics 1 The Design Process 2 Aircraft / Engine System Constraint Analysis 3 Aircraft / Engine System Constraint Analysis
4 Mission Analysis
5 Mission Analysis
6 Engine Selection: On-Design Cycle Analysis
7 Engine Selection: On-Design Cycle Analysis
8 Engine Selection: On-Design Cycle Analysis
9 Sizing the Engine: Installed Performance
10 Sizing the Engine: Installed Performance
11 Rotating Turbomachinery
12 Rotating Turbomachinery
13 Combustion Systems
14 Combustion Systems
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024017/Automatic Control Systems-2 Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 8 3 0 3 3 5 English Elective Semester Course Plan Week Topics 1 State equations, eigenvalues, eigenvectors, stability, controllability, observability 2 State equations, eigenvalues, eigenvectors, stability, controllability, observability 3 State equations, eigenvalues, eigenvectors, stability, controllability, observability
4 State space approach to control system design
5 State space approach to control system design
6 State variable feedback
7 Eigenstructure assignment
8 Eigenstructure assignment
9 State observation
10 State observation
11 Model following control
12 Introduction to optimal control
13 Linear quadratic regulator
14 Linear quadratic regulator
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024015/Computational Aerodynamics Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 8 3 0 3 3 5 English Elective Semester Course Plan Week Topics Simplification of the Navier-Stokes equations for steady, attached flows. integral formulation of 1 inviscid, irrotational flow equations for subsonic flows, panel methods Simplification of the Navier-Stokes equations for steady, attached flows. integral formulation of 2 inviscid, irrotational flow equations for subsonic flows, panel methods Simplification of the Navier-Stokes equations for steady, attached flows. integral formulation of 3 inviscid, irrotational flow equations for subsonic flows, panel methods 4 Design optimization of an airfoil with a panel method
5 Inverse airfoil design based on a panel method. Characteristic lines Discretization of the Transonic Small Disturbance equation on Cartesan grids using Finite 6 Difference methods, upwind differencing in supersonic regions Discretization of the Transonic Small Disturbance equation on Cartesan grids using Finite 7 Difference methods, upwind differencing in supersonic regions Discretization of the Transonic Small Disturbance equation on Cartesan grids using Finite 8 Difference methods, upwind differencing in supersonic regions 9 Numerical solution of transonic flows over airfoil profiles
10 Numerical solution of transonic flows over airfoil profiles
11 Numerical solution of transonic flows over airfoil profiles
12 Numerical solution of unsteady Full Potential Flow equation in curvilinear coordinate systems
13 Numerical solution of unsteady Full Potential Flow equation in curvilinear coordinate systems
14 Numerical solution of unsteady Full Potential Flow equation in curvilinear coordinate systems
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024010/Flight Stability and Control Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 8 3 0 3 3 5 English Compulsory Semester Course Plan Week Topics 1 Basic definitions of flight mechanics, control, and control surfaces 2 Aircraft static and dynamic stability and stability derivatives 3 Aircraft longitudinal and lateral dynamic equations, nonlinear dynamics
4 Linearization and transfer functions
5 Longitudinal modes of the motion; longitudinal stability derivatives, short and 4-5-3 phugoid modes Longitudinal transfer functions , analysis of transient and steady state responses for elevator 5-10 6 displacement Longitudinal transfer functions , analysis of transient and steady state responses for elevator 5-10 7 displacement 8 Basic concepts of the aircraft control systems; longitudinal autopilot design
9 Types of autopilots and design methods
10 Displacement autopilots design by root locus method
11 Design of autopilot by inner and outer loop concepts
12 Pitch and acceleration aircraft control system design methods
13 MATLAB and SIMULINK programming in aircraft dynamic and control systems
14 MATLAB and SIMULINK programming in aircraft dynamic and control systems
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024011/Graduation Project Aeronautical Engineering Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 8 3 0 3 3 9 English Compulsory Semester Course Plan Week Topics This is a non-lecture course. Student orientates his studies with regular meetings organized by 1 graduation project advisor 2 - 3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024014/Introduction to Atmospheric Aeronautical Engineering Physics-2 Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 8 3 0 3 3 5 English Elective Semester Course Plan Week Topics 1 Transfer Processes and Applications 2 Transfer Processes and Applications 3 Transfer Processes and Applications
4 Transfer Processes and Applications
5 Geomagnetic Phenomena
6 Geomagnetic Phenomena
7 Geomagnetic Phenomena
8 Geomagnetic Phenomena Atmospheric Signal Phenomena: General properties of waves, scattering of radiation, atmospheric 9 probing, natural signal phenomena, and effects of nuclear explosions. Atmospheric Signal Phenomena: General properties of waves, scattering of radiation, atmospheric 10 probing, natural signal phenomena, and effects of nuclear explosions. Atmospheric Signal Phenomena: General properties of waves, scattering of radiation, atmospheric 11 probing, natural signal phenomena, and effects of nuclear explosions. Atmospheric Signal Phenomena: General properties of waves, scattering of radiation, atmospheric 12 probing, natural signal phenomena, and effects of nuclear explosions. Atmospheric Signal Phenomena: General properties of waves, scattering of radiation, atmospheric 13 probing, natural signal phenomena, and effects of nuclear explosions. Atmospheric Signal Phenomena: General properties of waves, scattering of radiation, atmospheric 14 probing, natural signal phenomena, and effects of nuclear explosions.
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024013/Introduction to Helicopter Aeronautical Engineering Aerodynamics and Helicopter Design(TS-3) Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 8 3 0 3 3 6 English Elective Semester Course Plan Week Topics 1 Introduction and Basic Terminology 2 Rotor in Vertical Flight (Momentum Theory& Blade Element Theory) 3 Rotor in Vertical Flight (Momentum Theory& Blade Element Theory)
4 Introduction to Rotor Flap and Lag Dynamics
5 Rotor in Forward Flight (Momentum Theory& Blade Element Theory)
6 Rotor in Forward Flight (Momentum Theory& Blade Element Theory)
7 Helicopter Performance
8 Helicopter Performance
9 Helicopter Sizing
10 Helicopter Sizing
11 Helicopter Trim and Stability
12 Helicopter Trim and Stability
13 Introduction to Helicopter Conceptual Design
14 Introduction to Helicopter Conceptual Design
NECMETTİN ERBAKAN UNIVERSITY FACULTY OF AERONAUTICS AND ASTRONAUTICS COURSE DESCRIPTION FORM Course Code/Name : Department: 0030024016/Wind Energy and Wind Turbine Aeronautical Engineering Technology Course Type: Semester Lecture Tutorial Total Local ECTS Course Compulsory/ Hours Hours Hours Credits Credits Language Elective 8 3 0 3 3 5 English Elective Semester Course Plan Week Topics 1 Origins of Wind Energy 2 Wind Resource and Characteristics 3 Wind Resource and Characteristics
4 Wind turbine aerodynamics and performance
5 Wind turbine aerodynamics and performance
6 Wind turbine loading and dynamic response
7 Wind turbine loading and dynamic response
8 Conceptual design of wind turbines
9 Wind Turbine Control
10 Wind Turbine Control
11 Wind Turbine Siting and Wind Farms, Electrical Systems
12 Wind Turbine Siting and Wind Farms, Electrical Systems
13 Wind Energy System Economics
14 Environmental Aspects and Impacts.