DOCSLIB.ORG

PIG® Spill Kit in 20-Gallon Overpack Salvage Drum #KIT211 - Absorbs up to 12 Gal

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
PIG® Spill Kit in 20-Gallon Overpack Salvage Drum #KIT211 - Absorbs up to 12 Gal PIG® Spill Kit in 20-Gallon Overpack Salvage Drum #KIT211 - Absorbs up to 12 gal. • Container Type - Overpack • UN1H2/X75/S, UN1H2/Y100/S Strong enough to earn a UN rating for shipping spill cleanup waste. • Comply with Spill Plan regs, avoid fines and be ready to respond with the #1 kit for everyday liquid spills • Overpack drum container is UN Rated for shipping waste after spill cleanup • Neatly prepacked container speeds access during a spill emergency • PIG Blue Socks stop spreading spills; PIG Mat and Pillows absorb quickly • Temporary disposal bags help make cleanup easier • Overpack is X-rated in Packing Groups I, II and III for shipping spill cleanup waste by land, sea or rail • Lightweight polypropylene container resists chemicals and keeps contents clean and dry • Leakproof, twist-on lid is notched for easy removal or tightening with a 2x4 or pole • Large, color-coded label makes identification fast and accurate • Ledges molded into container make kit easy to move by forklift • Tamperproof seals help prevent pilfering of spill response supplies • Note: A PIG Overpack Protection Cover (available separately) is suggested for outdoor storage to protect container from UV degradation and weathering • Only PIG Spill Kits feature PIG Absorbents - the world's #1 selling brand • For information on custom spill kits, just call 1-800-HOT-HOGS (468-4647) Always in stock. Ships within 24 hours. By Phone: Online: Email: +1-814-684-0101 newpig.com/International [email protected] One Pork Avenue • Tipton PA 16684-0304 ITEM: KIT211 - Pg 1 of 3 © 2016 New Pig Corporation. All rights reserved. PIG and the PIG logo are trademarks in the U.S. and other countries. KIT211 Specifications Technical Information Absorbency: Up to 12 gal. Warnings & Restrictions: Container Type: Overpack There are no known warnings and restrictions for this product. Fluid Absorbed: Oils, Coolants, Solvents, Water High Visibility: No Certifications, Approvals and Ratings: UN1H2/Y100/S See-Through: No UN1H2/X75/S UV Resistant: Yes Wheels: No Wheels Regulations and Compliance: 49 CFR 173.3(c)(1) - If a container of hazardous Sold as: 1 each waste is damaged or leaking, it can be placed in a Weight: 30 lbs. compatible salvage drum that meets UN criteria for shipping. # per Pallet: 12 40 CFR 263.31 - Transporters, "must clean up any Composition: Container - Injection Molded Copolymer hazardous waste discharge that occurs during Polypropylene transportation…so that the hazardous waste discharge no longer presents a hazard to human Socks, Mats and Pillows - 100% Polypropylene health or the environment." Includes: 1 - ext. dia. 3" x 10' L PIG® Blue Absorbent 40 CFR 263.30(a) - In the event of a spill, transporters Sock (PIG202) must, "take appropriate immediate action to protect 4 - ext. dia. 3" x 48" L PIG® Blue Absorbent human health and the environment." Sock (4048) 40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) 15 - 15" W x 20" L PIG® Absorbent Mat Pad permit, facilities must have a plan in place that (MAT203) describes actions, procedures, control techniques, 2 - 17" W x 21" L x 2" H PIG® Absorbent Pillow management practices and equipment available to prevent illegal discharge of pollutants into waterways. (PIL201) 40 CFR 112.7 - SPCC planning requirements state 5 - 18" W x 30" H Polyethylene Disposal Bags that facilities subject to these regulations must have (BAG201-S) written plans in place discussing the products, 6 - 2" W x 6" L Tamperproof Seal Label countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil (LBL100) into waters of the United States. 1 - Instructions 29 CFR 1910.120(j)(1)(vii) - OSHA's HAZWOPER UNSPSC: 47131905 standard requires spill responders to have, "DOT specified salvage drums or containers and suitable quantities of proper absorbents," in areas where spills may occur. KIT211 Metric Equivalent Technical Documents: (Available at newpig.com/International) Absorbency: Up to 45.4 L Product Data Sheet (PDS) Safety Data Sheet (SDS) Weight: 13.6 kg Chemical Compatibility (CCG) By Phone: Online: Email: +1-814-684-0101 newpig.com/International [email protected] One Pork Avenue • Tipton PA 16684-0304 ITEM: KIT211 - Pg 2 of 3 © 2016 New Pig Corporation. All rights reserved. PIG and the PIG logo are trademarks in the U.S. and other countries. KIT211 Accessories You might like... Item Number PIG® Overpack Protection Cover PAK205 Wall-Mount Bracket for PIG® Spill Kit Container TLS468 PIG® High-Visibility Overpack Protection Cover PAK757 Refill for PIG® Spill Kit in 20-Gallon Container KITR211 By Phone: Online: Email: +1-814-684-0101 newpig.com/International [email protected] One Pork Avenue • Tipton PA 16684-0304 ITEM: KIT211 - Pg 3 of 3 © 2016 New Pig Corporation. All rights reserved. PIG and the PIG logo are trademarks in the U.S. and other countries..
Load more

Recommended publications
  • NYARNG-HMWMP.Pdf
    ii Table of Contents iii Table of Contents Table of Contents Section Page Chapter 1. Introduction.........................................................................................................................1-1 Purpose and Scope ...............................................................................................................................1-1 Reviews and Revisions..........................................................................................................................1-1 Applicable Regulations ..........................................................................................................................1-2 Federal Regulations ..........................................................................................................................1-2 State Regulations ..............................................................................................................................1-2 Military Regulations ...........................................................................................................................1-2 Local Regulations, Ordinances, and Codes......................................................................................1-4 Contractual Obligations .....................................................................................................................1-4 Regulatory Agency Contacts .................................................................................................................1-4 Environmental Office Point of Contacts.................................................................................................1-5
    [Show full text]
  • Our Steel Drum Program – a Perfect Fit for Great Logistics
    From the fi rst idea to end of useful life – MAUSER today. Global: World-wide market presence with more than 60 locations in over 30 countries. High quality: We know all aspects of our business and our products. Quality and security are key. Customer-focused: MAUSER serves international blue chips in the chemical, petrochemical, pharmaceutical and food industries as well as numerous regional accounts. We are experts for international standardization and specialties. Innovative: Numerous patents and awards MAUSER Holding GmbH REGIONAL HEADQUARTERS NCG demonstrate the MAUSER spirit for innovation. Schildgesstraße 71-163 National Container Group LLC SBU Asia 50321 Brühl, Germany West 38th Street 3620 Full-liner: The MAUSER product portfolio MAUSER Singapore Pte Ltd Phone: +49 (0) 2232 78-1000 60632 Chicago, USA 51 Benoi Road Blk 1, includes the complete range of rigid industrial Fax: +49 (0) 2232 78-1202 Phone: +1 (0) 773 847-7575 Liang Huat Industrial Complex packaging – plastics packaging, steel drums, Fax: +1 (0) 773 847-7557 [email protected] 629908 Singapore fi ber drums, composite IBCs; from small bottles www.mausergroup.com Phone: +65 (0) 68969321 [email protected] to 1250 l / 330 gal. IBCs. Fax: +65 (0) 68969327 www.nationalcontainer.com NCG Europe GmbH More than packaging: Process technology and SBU Europe Schildgesstraße 71-163 MAUSER Our steel drum program blow molding equipment are designed and built 50321 Brühl, Germany Kunststoffverpackungen GmbH in-house. Phone: +49 (0) 2232 78-1880 Schildgesstraße 71-163 – a perfect fi t for great Fax: +49 (0) 2232 78-1888 50321 Brühl, Germany MAUSER today is much more than a producer: Phone: +49 (0) 2232 78-1000 [email protected] logistics.
    [Show full text]
  • R12-13,102811 Prt 177
    ISS. GOVERNMENT INFORMATION GPO Pt. 177 49 CFR Ch. I (10—1—10 Edition) WARNING—MAY CONTAIN EXPLO engine using liquid fuel that has a flash SIVE MIXTURES WITH AIR—KEEP point less than 38 °C (100 5F), the fuel IGNITION SOURCES AWAY WHEN tank is empty, and the engine is run OPENING until it stalls for lack of fuel; (2) The motor vehicle or mechanical (6) A motor vehicle or mechanical equipment has an internal combustion equipments ignition key may in not be engine using liquid fuel that has a flash the ignition while the vehicle or me point of 38 °C (100 °F) or higher, the fuel chanical equipment is stowed aboard a tank contains 418 L (110 gallons) of fuel vessel. or less, and there are no fuel leaks in (b) All equipment used for handling any portion of the fuel system; vehicles or mechanical equipment (3) The motor vehicle or mechanical must be designed so that the fuel tank equipment is stowed in a hold or com and fuel system of the vehicle or me partment designated by the adminis chanical equipment are protected from tration of the country in which the stress that might cause rupture or vessel is registered other damage incident to handling. to be specially suit (c) Two hand-held, portable, dry ed for vehicles. See 46 CFR 70.10-1 and chemical fire extinguishers of at least 90.10—38 for U.S. vessels; 4.5 kg (10 pounds) capacity each must (4) The motor vehicle or mechanical equipment be separately located in an accessible is electrically powered by location in each hold or compartment wet electric storage batteries; or in which any motor vehicle or mechan (5) The motor vehicle or mechanical ical equipment is stowed.
    [Show full text]
  • The Truth About Salvage Drums There Is Confusion in the Marketplace Regarding Salvage Drums
    The Truth About Salvage Drums There is confusion in the marketplace regarding salvage drums. The term “overpack” has become synonymous with “salvage drum” in recent years, and there are many products on the market, which look like salvage drums, but are not. What is a salvage drum? Salvage drums are designed to contain packages of hazardous materials that are damaged, defective, or found leaking. The drums are regulated by the Department of Transportation (DOT) under 49 CFR 173.3 (c). If a company or shipper has a leaking package of hazardous material, sorbents, or rags used on a spill or leak, and they wish to ship them across public roads, they must use a salvage drum under the restrictions of 173.3 (c). The salvage drum is larger than the leaking package allowing the leaking package to be placed inside the salvage drum for safe shipment to a disposal or treatment facility. The salvage drum must be compatible with the lading in the leaking package. Shipments that do not follow the DOT Hazardous Materials regulations are shipping illegally and could face fines, typically $250.00 - $25,000.00 per violation, levied by the DOT. Salvage drums can be made of steel, polyethylene, aluminum, or metal and must pass, at a minimum, standard UN performance requirements for drums shipping solids as well as a three psi, air leakproof test. If a drum meets the requirements as stipulated by DOT under 49 CFR 173.3 (c), then it is to be marked with the appropriate UN markings, proper shipping name of the material, name and address of the consignee, and the words “Salvage Drum.” It is illegal to omit these markings from salvage drums prepared in accordance with 173.3 (c).
    [Show full text]
  • 49 CFR Part 387, a Rail Section, Unless the Lading Has Been Fu- Car, Freight Container, Truck Body, Or Migated Or Is Undergoing Fumigation
    Pt. 173 49 CFR Ch. I (10–1–10 Edition) where the material is relinquished to an- 24. Past incidents; other entity. Railroad facilities are railroad 25. Overall times in transit; property including, but not limited to, clas- 26. Training and skill level of crews; and sification and switching yards, storage fa- 27. Impact on rail network traffic and con- cilities, and non-private sidings; however, gestion. they do not include an offeror’s facility, pri- [73 FR 20772, April 16, 2008] vate track, private siding, or consignee’s fa- cility. Each rail carrier must use best efforts to communicate with its shippers, con- PART 173—SHIPPERS—GENERAL RE- signees, and interlining partners to ensure QUIREMENTS FOR SHIPMENTS the safety and security of shipments during all stages of transportation. AND PACKAGINGS C. Because of the varying operating envi- ronments and interconnected nature of the Subpart A—General rail system, each carrier must select and Sec. document the analysis method/model used 173.1 Purpose and scope. and identify the routes to be analyzed. 173.2 Hazardous materials classes and index D. The safety and security risk analysis to hazard class definitions. must consider current data and information 173.2a Classification of a material having as well as changes that may reasonably be more than one hazard. anticipated to occur during the analysis 173.3 Packaging and exceptions. year. Factors to be considered in the per- 173.4 Small quantity exceptions. formance of this safety and security risk 173.4a Excepted quantities. analysis include: 1. Volume of hazardous material trans- 173.5 Agricultural operations.
    [Show full text]
  • Aztec Polyethlene Spill NEW AA4.Cdr
    TM Aztec Chemicals Customer Services: 01270 655500 Fax: 01270 655501 E-mail: [email protected] www.aztecchemicals.com POLYETHYLENE SPILL CONTAINMENT AND STORAGE RANGE ® OVERPACKING TECHNIQUES POLY-OVERPACK 95 SALVAGE DRUM Most overpack situations can IS YOUR OVERPACK REALLY A SALVAGE DRUM? be handled using one of the following techniques. Our Poly-Overpack 95 meets Group 1 packaging standards and salvage drum regulations (unlike competitive overpacks). The Poly-Overpack 95 safely contains a wide range of hazardous materials - including acids, corrosives and damaged parts - in 55-gallon drums. Tight, secure and leak-free container closing is simple: just place any long object, like a wooden two-by-four, in the handy lid slots and turn it to screw the lid down tightly. Inverted Overpack Technique Place the damaged drum on the overpack lid. Slide the overpack over the drum. Rotate them upright. Twist-down lid for safe closure Closed cell gasket in lid helps seal closure Patented castellations in lid allow for easy closing with pole or wooden two-by-four Roller Technique Place the damaged drum on its side with Double wall lid gives 1 to 2-inch metal rollers underneath it added strength (water pipe works fine). Place the over- pack so that the damaged drum can be rolled most of the way into the overpack. Molded area allows for Then turn the overpack upright. easy gripping and pick-up by material handling equipment Patented ribbed design provides extra strength 100% UV-protected polyethylene provides protection over a wide range of chemicals Drum Lifting Technique A Drum Lifter is attached to the damaged drum.
    [Show full text]
  • ENPAC 2018 Catalog.Pdf
    SPILL CONTAINMENT, OVERPACK SALVAGE DRUMS, SPILL PALLETS, SORBENTS, SPILL RESPONSE, PORTABLE CONTAINMENT, SPILL KITS, STORMWATER TABLE OF CONTENTS Overpacks / Salvage Drum Dispensing Hand Carried Spill Kit ................. 48 NEW 95 Gallon Poly-Overpack® Poly-Dolly® ................................ 28 Long Haul Truck Spill Kit™ ......... 48 Salvage Drum ........................ 4 Poly-Dolly® ATD ......................... 28 Long Haul Econo Spill Kit ........... 48 Envirosalv™ Poly Poly-Dolly® Conversion Kit ........ 28 Econo Saftey Pail Spill Kit™ ...... 49 Salvage Drum Plus ................ 4 Mini-Racker™............................. 29 Forklift Vehicle Spill Kit™ ........... 49 Envirosalv™ Lock Mini-Racker™ Mobile Unit ......... 29 Fast Pack™ Spill Kit ................... 49 Down Security Kit ................. 4 Mini-Stacker™............................ 29 Speedy Duffel™ Spill Kit ............ 49 Poly-Overpack® 95 Poly-Safetypack® ...................... 29 ENPAC® Leak Repair Kit ........... 50 SALVAGE/OVERPACK DRUMS Salvage Drum ........................ 5 Poly-Safetypack® Plus .............. 29 Spill Caution Sign ....................... 50 .....4 Poly-Overpack® 110 Poly-Racker™ ............................ 30 Poly-Top Tarp ............................. 50 Salvage Drum ........................ 5 Poly-Stacker™ ........................... 30 Tamper Seal Label ...................... 50 Drum Lifter .................................... 5 Poly-Shelf™ ............................... 30 PPE Spill Pak .............................. 50 Poly-Overpack®
    [Show full text]
  • PIG® Battery Acid Spill Kit in 20-Gallon Overpack #KIT352 - Absorbs up to 12.5 Gal
    PIG® Battery Acid Spill Kit in 20-Gallon Overpack #KIT352 - Absorbs up to 12.5 gal. • No Wheels • UN1H2/X75/S, UN1H2/Y100/S Our strong UN Rated overpack spill kit lets you safely clean up and dispose of battery acid spills. • Kit contents are formulated specifically for absorbing and neutralizing battery acid • PIG HazMat Socks stop spreading spills; PIG HazMat Pads and Pillows absorb; PIG Acid Neutralizing Loose Absorbent handles remaining acid • Includes PPE to guard against corrosive battery acid • 20-gallon overpack salvage drum container meets DOT shipping specifications for overpacking hazardous materials • Temporary disposal bags help make cleanup easier • For info on custom kits, just call 1-800-HOT-HOGS (468-4647) Always in stock. Ships within 24 hours. By Phone: Online: Email: 1-855-493-HOGS newpig.com [email protected] One Pork Avenue • Tipton PA 16684-0304 ITEM: KIT352 - Pg 1 of 3 © 2014 New Pig Corporation. All rights reserved. PIG and the PIG logo are trademarks in the U.S. and other countries. KIT352 Specifications Technical Information Fluids Absorbed: Acids Warnings & Restrictions: Absorbency: Up to 12.5 gal. HAZ-MAT Notice To ensure effectiveness and your safety, we Spill Volume: 10 - 19 gal. recommend that you conduct compatibility and Lift-out Basket: No absorption testing of your chemicals with PIG® HAZ- MAT products prior to purchase. If you have any Outdoor Storage: Yes questions or need samples to test, please call UN Rated: Yes Technical Services. Hydrofluoric Acid Notice UV Resistant: No Do not use with hydrofluoric acid. Wheels: No This product is subject to export restrictions and cannot be shipped to: AT, BE, BG, CY, CZ, DE, DK, Sold as: 1 each EE, ES, FI, FR, GR, HU, IE, IT, LT, LU, LV, MT, NL, Weight: 30 lbs.
    [Show full text]
  • Deluxe Long Haul Truck Spill Kit Econo Long Haul Truck
    SPILL KITS HAND CARRIED & ECONO™ SPILL PAK KITS BATTERY ACID SPILL KITS Perfect for stashing behind the seat of a truck, in a cabinet or placing in tool box, the Hand WHY TAKE RISKS WHEN YOU CAN TAKE PRECAUTIONS Carried and Econo Spill Pak Kits are ideal for spill response on the go! Providing quick and efficient clean-up for your unplanned spills, they can be refilled, but are so economical, we Prepare your battery charging and filling area with a 5- or 20-gallon battery feel they’re disposable! acid spill kit. These kits are specifically made to neutralize battery acid spills quickly, absorb them effectively, and equip you with everything needed to stop the spill from spreading and clean-up the exposed area. Helps comply with HAND CARRIED & ECONO™ SPILL PAK KITS 29 CFR 1910.178(g)(2) for battery storage, filling and flushing regulations. Part # Description Absorbs up to gal. (L) Weight lb. (kg) Kit Includes ENP D715 Universal Hand Carried 6 (23) 6 (2.7) 1 Spill Pak Bag, 15 Pads, 3 Medium Socks, 1 Pair BATTERY SPILL KITS ENP D717 Aggressive Hand Carried Nitrile gloves, 2 Disposal Bags with ties, 1 Instruction Part # Description Absorbs up to gal. (L) Weight lb. (kg) Kit Includes ENP D716 Oil Only Hand Carried Sheet, 1 SDS(s). 1305-BAT 5-Gallon Pail 4 (15) 8 (3) 1 - 5-Gallon Safety Pail, 1 BatX Neutralizing Shaker, 1 Tyvek Suit, 10 Aggressive Pads, 3 13-SP2U Universal Econo 5 (19) 5 (2.3) 1 Spill Pak Bag, 10 Pads, 2 Medium Socks, 1 Pair Medium Socks, 1 pair Goggles, 1 pair Nitrile Gloves, 1 Disposal Bag with Tie.
    [Show full text]
  • Hazardous Materials Packaging
    2 www.myerscontainer.com | (800) 406-9377 HAZARDOUS MATERIALS PACKAGING Understanding Performance- Oriented Packaging Standards For Steel Drums FEBRUARY 2011 TENTH EDITION Myers Container ,LLC 2011 I. PERFORMANCE ORIENTED PACKAGING 2 www.myerscontainer.com | 1.800.406.9377 | 8435 NE Killingsworth St Portland, OR 97220 2 www.myerscontainer.com | (800) 406-9377 Background 2 Evolution of Performance Oriented Packaging 4 Time Table 5 Transition Dates §171.14 6 Old System - Specification Based Packaging 7 New System - Performance Oriented Packaging 7 Major Changes 9 Definitions §171.8 13 Reference §171.9 15 II. MARKINGS 16 Drum Markings §178.503 16 III. PACKAGE SELECTION 22 Responsibility § 173.22 22 Assembly Notification §178.601(b) & §178.2 (c) 22 Package Selection 23 UN Performance Oriented Packaging Specification Sheet 25 IV. TESTING §178.600 26 Design Type §178.601(c)(4) 26 Design Qualification Testing §178.601 (c) (1) 27 Periodic Retesting §178.601 (c) (2) 27 Production Testing §178.601 (c) (3) 28 Drop Test §178.603 29 Leakproofness Test §178.604 29 Hydrostatic Pressure Test §178.605 30 Stacking Test §178.606 31 www.myerscontainer.com | 1.800.406.9377 | 8435 NE Killingsworth St Portland, OR 97220 2 www.myerscontainer.com | (800) 406-9377 Steel Drum School - Haz Mat Exam 33 Steel Drum School - Haz Mat Exam Answers 34 Test Report - Liquids 35 Test Report - Solids 36 APPENDIX - STEEL THICKNESS 37 APPENDIX - UN DRUM ASSEMBLY INSTRUCTIONS 38 APPENDIX - TWENTY QUESTIONS ABOUT PERFORMANCE-ORIENTED PACKAGING 39 APPENDIX - NON-HAZARDOUS PACKAGING
    [Show full text]
  • Build a Custom Spill Kit with Just What You Need!
    Custom Spill Kits Build a Custom Spill Kit with Just What You Need! Get the perfect Spill Kit for your application How much do you If you can’t find exactly what you need in our selection of 1. need to absorb? pre-packed kits, we’ll be glad to build one to your specifications. Answer five simple questions (at right) to help choose the type and What is your worst-case scenario? quantity of sorbents you require, the accessories to make the You’ll need enough sorbents to clean response safer and the container that will work best. There’s no up the maximum amount, whether it’s extra charge for this service, so it’s an easy way to customize your one gallon or one hundred. spill response plan and stock only the sorbents and PPE you really need. After you’ve made your list, just contact your local What liquid are you Distributor and we’ll do the rest! 2. absorbing? For multiple everyday liquids, use Universal. To soak up oil and repel water, choose Oil-Only. To alert workers to a dangerous spill, use HazMat. What type of spills 3. do you deal with? Slops and spills use pads for quick wiping and cleanup. Drum/tank leaks need more socks for diking and Plug & Dike epoxy to stop the flow. Large-volume spills require booms for containment and pillows for more sorbency. What type of PPE and 4. accessories will you need? Most spills call for boots, gloves and goggles. Will you need coveralls? How much chemical protection do you need? How often will you have to replace disposable items? What type of container 5.
    [Show full text]
  • Specialtytools.Com Your One Stop Tool Source
    SPECIALTYTOOLS.COM YOUR ONE STOP TOOL SOURCE SIMPLY THE BEST 2008 PRODUCT SAMPLER FIND THOUSANDS MORE PRODUCTS ONLINE WWW.SPECIALTYTOOLS.COM SOLID SURFACE SPECIALTYTOOLS.COM ON THE COVER IN THIS ISSUE Many of the logos on the cover are easily recognizable, but some are Abrasives 31-35 Laminate Tools 46-49 not. These logos represent the best of the best in our industry and we Adhesive Guns 18 Layout Tools 53-54 want to thank them for their continued support. They are the ones Ashesive Tips 18 Material Handling 5-7 who actually produce many of the items we sell They manufacture Boring Tools 51-52 Pinch Rollers 50 these items knowing they will fall into the hands of craftsmen who Caulk Guns 20 Polishers 14-15 will rely on these tools to make their living so they take extra care Caulk Guns 20 Profile Wheels 19 in making sure they are well made and reli- Clamps 42-44 Profilers 12-13 able. All the tools we carry are tested and re- Cleaning Stuff 30 Repair Kits 25 fined, tried by professionals and tested again. Coving Tools 21 Router Bits 36-41 So as you are looking through the catalog at Curverd Plywood 53 Routers 12 the tools we make available you can rest as- Dust Control 22-24 Sanders 14-15 sured that they are everything that we say and Edgebanders 56-57 Saw Blades 19 we stand behind all our tools with a 30 day Fabrication Stands 8 Saws 10,11,60,64 money back guarantee. Flooring Tools 45 Seamers 16-17 Forming Tools 28-29 Sink Bowls 26 PRICE GUARANTEE Glue Guns 20 Straight Edges 9 STONE ver the years we’ve not really kept track of our competitors pricing.
    [Show full text]