DOCSLIB.ORG

Gain the Paxton Advantage! for 2019

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Gain the Paxton Advantage! for 2019 NEW FOR 2019 Gain The Paxton Advantage! Chicago www.paxtonwood.com The Paxton Advantage Table of Contents Decorative Surfaces Are Used Everywhere! Querkus - Textured European White Oak & Reclaimed Panels Page 3 Today, residential and commercial interior designers have available to Shinnoki - Prefinished Wood Panels Page 3 them a broader range than ever before of decorative surfaces and use them to create innovative, emotive and functional interiors. Decorative Paxton - Architectural Decor Panels Page 4 surfaces are used on virtually every type of exposed surface be it kitchen, Decospan - European White Oak Page 4 bath and storage cabinets, office or residential furniture, and increasingly on feature walls, all of which combine to create the desired living or Echowood - Reconstituted Wood Veneers Page 5 work environment. Our surfaces are available in natural wood, reclaimed Echowood PFP - Prefinished Panels Page 5 wood, and composite or synthetic. Synthetics may be deeply embossed Egger - PerfectSense Gloss Lacquered Boards Page 6 to provide textures that mimic Mother Nature or satiny smooth or high gloss to reflect light and enhance color. Egger - Feelwood Thermally Fused Laminates Page 6 FINSA - Thermally Fused Laminates Page 7 Our Decorative Surfaces address a broad range of criteria important to designers and end-users: design, color, surface texture, quality, Roucke HD - By Premier EuroCase Page 7 functionality, and durability. Material cost and life cycle costs are also Reflekt - High Gloss - By Premier EuroCase Page 8 a factor in determining which material is best suited for an application. UltraMatte - By Premier EuroCase Page 8 A final and very important consideration is the very reliable suppliers standing behind our products ensuring the timely supply of top quality BauBuche - Laminated Veneer Lumber Page 9 and consistent materials. 9Panels for Spectacular Cabinet Interiors Page 10 Multipurpose Panels Page 10 We invite you to review our Decorative Surfaces Collection and encourage you to meet with our very knowledgeable staff to Hardwood Lumber Items Page 10 discuss all supply options. Ready to Use Components Page 10 P1 P2 Edgebanding Available Textured European White Oak Architectural Decor Panels & Reclaimed Panels Oak Natural Allegro Oak Vintage Harlem Walnut Quilted Maple • Variety of sequenced matched and number panels in stock • Wire brushed & patented “saw effect” scratching • Rift and quartered white oak, walnut, red oak and sapele • Mixmatch technique to give natural appearance of solid wood • Plain sliced white oak, walnut, cherry, maple, red oak, • Thick cut veneer for deep brushing and scratching OPEN sapele and mahogany BROCHURE • European white oak – matched for color consistency • Additional species available with fl itch matching methods • Reclaimed veneer from railways in Europe • 3/4”, 1/2”, 3/8”, 1/4” • 20mm 48.8” x 98.4” on MDF • 48.5” x 96.5” and 48.5” x 120.5” on MDF • 0.8mm and 1mm edgeband available, brushed and scratched Oak Vintage Baltimore Oak Vintage Hoboken Mahogany Sapele Edgebanding Available European White Oak • Prefi nished wood panels – 10% sheen matte fi nish • Imported from Europe • Mixmatch technique to give natural appearance of solid wood • Consistent color – sort and match color for consistency • Europe’s top designers put together range of selections Granite Walnut Dust Frake Rift Cut Mix Match Rift Cut Slip Match • Desired appearance that can not be duplicated with • Protective peel coat to protect fi nish domestic white oak • 19mm 48.8” x 109.8” NAF MDF – 2 sided • Available in the following • Prefi nished 0.6mm edgeband and 1mm ABS edgeband available º Heavy Flake Quartersawn OPEN º Rift Cut -slip matched BROCHURE º Rift Cut – random mix match to give natural appearance of solid wood • 3/4” 48.8” x 98.4” on MDF – 2 sided Vanilla Larch Manhattan Oak Heavy Flake Quartersawn P3 P4 Edgebanding Edgebanding Available Available • Reconstituted veneer - consistency from sheet to sheet PerfectSense Gloss Lacquered Boards • Multiple veneer options available with a variety of backers Based on EGGER’s proven MDF quality PerfectSense or substrates PS Rosewood Napa Alabaster White Light Grey Gloss represents the premium category of high-gloss • All veneers available for prompt shipment decorative lacquered boards. – 49.6” x 97.6” and 49.6” x 122” OPEN • 6 wood grains available 2 sided on MDF for immediate shipment • High depth effect and mirror gloss fi nish OPEN BROCHURE 3/4” 48.5” x 96.5” • Supports economic manufacturing BROCHURE º Qtr’d Teak, Slate, Sandstone, Qtr’d Walnut, Rift White Oak • Premium appearance through the glasslike fi nish and Qtr’d African • High resistance to micro-scratches ensures long lasting • 0.6mm and 2mm edgeband available brilliant surface VG Fir Qtr Zebrano Dust Grey Black Edgebanding Edgebanding Available Available • High quality, environmentally friendly UV cured enamel Feelwood synchronized pore (EIR) on TFL that contains no VHAPs and is extremely low in VOC’s EGGER’s Feelwood range of decors specially designed • Consistent cabinet to cabinet, project-to-project fi nish with multi-layers of papers to create a depth of texture often seen • A perfect fi nish every time Qtr Teak Slate Shorewood Anthracite Mountain Larch with solid wood. These decors represent the premium category • Reduces labor and handling time resulting in improved among the 223 TFL decors within the EGGER decorative collection. throughput and a quicker turn-around • CARB2/TSCA conformity and FSC® Mix Credit certifi ed products OPEN Panel Sizes: are available on request OPEN BROCHURE • 1/4” - 4’ x 8’ or 4’ x 10’ 2-sided on MDF core • No compromise in appearance and performance due to available BROCHURE • 3/4” - 4’ x 8’ or 4’ x 10’ 2-sided on MDF core décor matching laminate and edging materials • Offer the best of two worlds: Wood reproductions Rift White Oak PS Walnut Brushed Aluminum Natural Halifax Oak designed by nature with a high-quality and lightfast fi nish • Benefi t from short lead times through local stock P5 P6 Edgebanding Available Thermal Fused Laminates by FINSA demonstrates the progression • Acrylic high gloss of melamine with new textures, exclusive fashion forward • The most scratch resistant high-gloss surface available Roble Azabache Roble Colorado Orange Metallic Beige European Designs and unique benefi ts like antibacterial fi nish • Impeccable surface consistency at no additional cost. • Color richness that enhances depth and clarity • Ordered as gloss 2 sided or 1 sided with melamine back OPEN • One of Europe’s leading board manufacturers • Protective peel coat to protect fi nish OPEN BROCHURE BROCHURE • Made in Spain with the latest TFL technology • All colors available in laser edgebanded components • Anti-bacterial • 3/4” 49” x 97” white high gloss face with white melamine back • Available on specialty cores including FR, MR, MDF, VC on MDF – in stock • Panel size 3/4” 48.5” x 97” Roble Denver Lino Habana Corsa Red Fly Yellow • Edgeband available in matching mirror gloss or “V-edge” two-tone • 3/4” 49”x97” on MDF – all colors in stock 1 and 2 sided Edgebanding Edgebanding Available Available • High-defi nition structured melamine panels and parts • Acrylic UltraMatte • European trend-setting designs Aspen Basait Pebble Beige • Incredibly smooth and soft to the touch to create • Delivers look and feel of real wood a subtle elegance • Available in laser edgebanded components • Superior hardcoat protection for excellent scratch • 1/4” and 3/4” 49” x 97” sheets available special order and chemical resistance OPEN • Protective peel coat to protect fi nish OPEN BROCHURE BROCHURE • Available in laser edgebanded components • 3/4” 49”x97” on MDF – all colors in stock 1 and 2 sided Durango Aloe Stone Black P7 P8 Panels for Spectacular Cabinet Interiors Hardwood Lumber Items ® OPEN Prefi nished Hardwood Plywood CARB2 Approved and FSC available upon request Extensive selection of domestic and BROCHURE imported lumber Walnut and rift white oak (Domestic). Available core: 2 Step J core • In-house milling service: Surface 2 sides, • Available sizes: ¾” x 48.5” x 96.5” straight-line rip 1 & 2 edges, sanding BauBuche is a laminated veneer lumber made from beech • Prefi nishing options: 2 sides manufactured exclusively by Pollmeier. Peeled veneer layers of Maple (Domestic). Available cores: 2 Step J core, veneer core, Paxton Moulding Program 3mm in thickness are parallel or cross-laminated and turned into • Face frame, door mould, crowns, and drawer sides combination core with MDF crossbands • In-house custom moulding program with thousands beams, boards, panels and fl ooring elements. • Available sizes: ¼”, ½”, ¾” x 48.5” x 96.5” of styles to choose from. Call for details. • Prefi nishing options: 1/4” 1 sided ½” & ¾” 1 side or 2 sides • Used for Table tops, sturdy work surfaces, ceiling and wall OPEN BROCHURE cladding, stairs, and elegant wood fl ooring with the durability of an industrial fl oor Premium Hardwood Plywood, Ready to Use Components OPEN • Can be machined as solid hardwood and are perfect for Import Panels made to HPVA specifi cations BROCHURE • Available sizes: ¼”, ½”, ¾” x 48.5” x 96.5” Prefi nished Aspen Drawersides with 1/4” dado (Bulk Packed) visible applications • Prefi nishing options: 1/4” 1 sided ½” & ¾” 1 side or 2 sides • Available sizes: 15.9mm x 3 7/8”, 6”, 8”, 11” x 45” long • Sanded surface is also ideal for further fi nishing Burcher Block Countertop and Work Surfaces • Thicknesses: 0.787”, 1.378”, 1.77”, 2.36” OPEN BROCHURE • Maple, walnut,
Load more

Recommended publications
  • What's a Dado Anyway?
    What’s A Dado Anyway? hen we first found the thing back The dado found on Nikumaroro has a Win 1989 we took it to be the cover number of features which make it particularly of some kind of box. Although it didn’t interesting: look much like an airplane part it was, 1. Although evidently used in what appeared at least, made of aluminum and, at the to be the village’s carpentry shop as a sur- Research In Progress Research In Progress Research In Progress end of a grueling expedition which had face to hammer upon, it was never cut apart, found little else, that was good enough. broken or even seriously bent. Alone among In the catalogue of artifacts from NIKU I, acces- the various pieces of aircraft debris found sion number 2-18 is described as “aluminum on the island to date, 2-18 is a complete plate with riveted bands on edges; part of box?” structure, and yet nowhere does it carry a found at “Karaka village, Ritiati, structure 17 part number. (carpenter’s shop?).” After six years of research 2. Identical pry marks at each of the holes we’re now able to provide a somewhat better in the right angle bend suggest that it was description. originally attached with nails to wooden TIGHAR Artifact 2-18 is a structure known flooring. in aviation parlance as a “dado.” An internal fixture rather than part of the airframe, a dado 3. Several modifications made to the structure is a panel (often insulated) which covers and suggest that it was installed in a different protects the juncture of the aircraft’s cabin location and served a slightly different flooring and the fabric-covered interior wall.
    [Show full text]
  • Dado & Accessories
    20-73 pages 8-28-06 8/30/06 11:21 AM Page 63 Dado Sets & Saw Blade Accessories Dado Sets 63 Whether you’re a skilled professional or a weekend hobbiest, Freud has a dado for you. The SD608, Freud’s Dial-A-Width Dado, has a patented dial system for easy and precise adjustments while offering extremely accurate cuts. The SD300 Series adds a level of safety not found in other manufacturers’ dadoes, while the SD200 Series provides the quality of cuts you expect from Freud, at an attractive price. 20-73 pages 8-28-06 8/30/06 11:21 AM Page 64 Dial-A-Width Stacked Dado Sets NOT A 1 Loosen SD600 WOBBLE Series DADO! 2 Turn The Dial 3 Tighten Features TiCo™ High Dado Cutter Heads Density Carbide Crosscutting Blend For Maximum Performance Chip Free Dadoes In Veneered Plywoods and Laminates The Dial-A-Width Dado set performs like a stacked dado, but Recommended Use & Cut Quality we have replaced the shims with a patented dial system and HARDWOOD: with our exclusive Dial hub, ensures accurate adjustments. SOFTWOOD: Each “click” of the dial adjusts the blade by .004". The Dial- A-Width dado set is easy to use, and very precise. For the CHIP BOARD: serious woodworker, there’s nothing better. PLYWOOD: • Adjusts in .004" increments. 64 LAMINATE: • Maximum 29/32" cut width. NON-FERROUS: • Adjusts easily to right or left operating machines. • Set includes 2 outside blades, 5 chippers, wrench and Application CUT QUALITY: carrying case. (Not recommended for ferrous metals or masonry) • Does not need shims.
    [Show full text]
  • Blocks Weeds* up to 3 Months Guaranteed!
    Blocks Weeds* Up To 3 Months Guaranteed! GARDEN Not for Use on Lawns STOP WEEDS* Before They Start! Precautionary Statements Hazards to Humans and Domestic Animals CAUTION Causes moderate eye irritation. Wear protective eyeware. Harmful if swallowed, inhaled or absorbed through the skin. Avoid contact with eyes, skin or clothing. Users should remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. Prolonged or frequently repeated skin contact may cause allergic reaction in some individuals. Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. User Safety Recommendations • Users should wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. • Users should remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. First Aid • Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove í para abrir | Presione volver a cerrar IF IN EYES: contact lenses, if present after the first 5 minutes, then continue rinsing eye. • Call a poison control center or doctor for treatment advice. • Call a poison control center or doctor immediately for treatment advice. Levante aqu IF SWALLOWED: • Have person sip a glass of water if able to swallow. • Do not induce vomiting unless told to do so by a poison control center or doctor. • • Do not give anything by mouth to an unconscious person. IF ON SKIN • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15-20 minutes. OR CLOTHING: • Call a poison control center or doctor for treatment advice.
    [Show full text]
  • Stack Dado Set Instructions Item #SDS-0630 & SDS-0842
    1051 Olsen Dr Ste 111 | Henderson, NV 89011 Phone: 702-294-1231 | Fax: 702-294-1232 Email: [email protected] | Website: www.oshlun.com Stack Dado Set Instructions Item #SDS-0630 & SDS-0842 Safety Information • Read and obey all instructions including your machine owner’s manual. Failure to obey instructions could lead to serious bodily injury or even death. • All rotating tools can be dangerous, use this product at your own risk. • Always wear ANSI approved eye and hearing protection, as well as a dust mask or respirator. A full-face shield is also recommended. • Do not use this product on any under-powered table saw or other type of machine such as a miter saw, portable circular saw, or any other saw that is not recommended to run a stack dado by the saw manufacturer. Consult your owners manual before use and obey all instructions. Contact the saw manufacturer if you do not have the manual. • Always turn the power off and unplug the electrical cord when changing blades, accessories, or servicing the machine. • Keep your hands, body, clothing, and hair clear of the cutting area. Do not wear jewelry or loose fitting clothing while using this product. • Be sure to follow the rotational arrows on the blades and chippers when installing. • Always do a final inspection and make sure the arbor nut is properly securing the dado. Also ensure that the blades and chippers are properly spaced so the carbide teeth are not touching. • Never use this product at speeds in excess of the maximum RPM rating. • It is recommended to use a dado insert if using on a table saw.
    [Show full text]
  • A Comprehensive Epithelial Tubo- Ovarian Cancer Risk
    medRxiv preprint doi: https://doi.org/10.1101/2020.12.04.20244046; this version posted April 13, 2021. The copyright holder for this preprint (which was not certified by peer review) is the author/funder, who has granted medRxiv a license to display the preprint in perpetuity. It is made available under a CC-BY-NC-ND 4.0 International license . A Comprehensive Epithelial Tubo- Ovarian Cancer Risk Prediction Model Incorporating Genetic and Epidemiological Risk Factors Andrew Lee*1, Xin Yang*1, Jonathan Tyrer2, Aleksandra Gentry-Maharaj3, Andy Ryan3, Nasim Mavaddat1, Alex P. Cunningham1, Tim Carver1, Stephanie Archer4, Goska Leslie1, Jatinderpal Kalsi5,6, Faiza Gaba7, Ranjit Manchanda7,8, Simon A. Gayther9, Susan J. Ramus10,11, Fiona M. Walter4, Marc Tischkowitz12, Ian Jacobs5,10, Usha Menon3, Douglas F. Easton1,2, Paul P.D. Pharoah1,2, Antonis C. Antoniou†1 1 Centre for Cancer Genetic Epidemiology, Department of Public Health and Primary Care, The University of Cambridge, Strangeways Research Laboratory, Cambridge CB1 8RN, UK. 2 Centre for Cancer Genetic Epidemiology, Department of Oncology, The University of Cambridge, Cambridge CB1 8RN, UK. 3 MRC Clinical Trials Unit at UCL, Institute of Clinical Trials & Methodology, University College London, London, WC1V 6LJ, UK. 4 The Primary Care Unit, Department of Public Health & Primary Care, The University of Cambridge, Cambridge, CB1 8RN, UK. NOTE:1 This preprint reports new research that has not been certified by peer review and should not be used to guide clinical practice. medRxiv preprint doi: https://doi.org/10.1101/2020.12.04.20244046; this version posted April 13, 2021. The copyright holder for this preprint (which was not certified by peer review) is the author/funder, who has granted medRxiv a license to display the preprint in perpetuity.
    [Show full text]
  • Radial Arm Saw Table Plans
    Radial Arm Saw Table Plans Uppermost Godard sometimes discontinuing any gauffers intertwining furiously. Which Brian case-harden so sound that Elwin overcloud her centralists? Tome slums erewhile if limber Barrett archaizing or compartmentalizing. If you have either never so a table saw arm plans radial arm base using a slot and forth toward the right or off Only used for table plans diy user should then rip cut out and making dado blade to swing it a one before attempting any plans radial table saw arm saw, rear end stopdoes not. But on that theedges are used to be emailed after things had to use and a mess, the table and what year from having to! The alignment of plans for doing this is it from flying splinters, what my dewalt ras arm saw table plans radial. Delta contractors saw plans, and clean it is that still mutters to pieces of a measurement, where compound miters with table saw plans radial arm. It isattached to its own fence insert, so it is very rapid toinstall expensive than the spring steel fingers, it is quickerand easier to adjust for ordinary ripping operations. Step Instructions on study to Build a Woodmakers Box control With a Radial Arm Saw. MDF bed and fences easily replaced. The locking nut is in the crack as best reachedwith the small fry of special thin blade brake that comes with thesaw. In a few years, I expect to be moving. Pins lock it would not togum up, but never use a new fence guide the arm saw table plans radial arm.
    [Show full text]
  • Stock Moulding Profiles
    STOCK MOULDING PROFILES Clear Pine – FJP BED CORNICE CROWN APPROXIMATE COVERAGES APPROXIMATE COVERAGES APPROXIMATE COVERAGES APPROXIMATE COVERAGES 1 1 7 1 1 7 1 1 1 3 3 7 7 9 11 CEILING 1 /8" 1" 1 /2" 1 /8" CEILING 1 /2" 2 /8" 1" CEILING 1 /8" 2 /4" 2 /8" 2 /16" 2 /16" 3 /4" CEILING 1 /8" 2 /16" 2 /16" 3 /16" 3 1 11 1 5 1 3 1 7 11 1 11 5 7 1 WALL 1 /8" 1 /8" 1 /16" 2 /16" WALL 1 /8" 2 /2" 1 /8" WALL 2" 2 /4" 2 /8" 3 /16" 4 /16" 3 /16" WALL 2" 2 /8" 3 /8" 3 /2" F F F 8017 BED 8016 BED WM74 8622 CORNICE 8018 BED 8624 CORNICE WM72 8010 CROWN 9 1 16 2 WM52 / x 1 / 8019 BED 8003 CROWN WM70 8623 CORNICE 9 3 9 3 /16 x 1 /4 /16 x 1 /4 8000 CROWN F WM57 8009 CROWN 9 1 LWM49 16 4 9 1 / x 2 / 8002 CROWN /16 x 2 /4 9 3 9 3 8006 CROWN 16 4 F /16 x 2 /4 / x 2 / 8013 CROWN 9 3 8027 CROWN 8047 CROWN /16 x 2 /4 WM47 9 1 8004 CROWN 16 4 8005 CROWN 9 1 / x 3 / /16 x 3 /4 9 5 /16 x 3 /8 F FJP Only 9 5 /16 x 3 /8 CORNER SCOTIA PICTURE 8238 CORNER 8200 CORNER 8240 8059 8062 8060 8061 11 1 11 1 WM96 WM95 /16 x 4 /4 /16 x 5 /4 8059B WM94 8052 11 1 11 5 WM206 /16 x 5 /4 /16 x 4 /8 1 1 WM100 2 2 11 5 / x / F /16 x 4 /8 1 1 3 3 11 11 16 2 4 4 8288 1 / x 2 / / x / 5 3 16 16 8 4 / x / 1 7 / x / WM204 2 8 11 7 1 1 / x / 8263 WM273 1 /16 x 1 /16 /16 x /8 11 1 5 5 /16 x 1 /8 1 /16 x 1 /16 8440 11 3 /16 x 1 /8 WM999 5 CASING (Rosette) COVE /16 x 1 11 3 /16 x 1 /4 APPROXIMATE COVERAGES 3 9 7 CEILING 1 /16" 1 /16" 1 /8" 1 5 CASING WALL 1 /4" 1 /8" 2" 37 CASING 8710 CASING 8753A CASING WM316 WM351 F 11 1 11 1 16 4 11 1 /16 x 3 /2 8025 COVE / x 2 / /16 x 2 /2 8024 COVE WM85
    [Show full text]
  • Moulding Selection Guide
    $5 Inspired People • Innovative Solutions • Beautiful Homes 2011-2012 Moulding Selection Guide www.mouldingandmillwork.com IT AL E R T L Green Initiatives U T Ultralite A S O MOULDING & MILLWORK INC. AND OUR AFFILIATED BUSINESSES ARE U P E R C COMMITTED TO SUSTAINABLE BUSINESS PRACTICES. Supercoat MDF Mouldings • WEIGHT SIMILAR TO PINE We are proudly promoting the use of certifi ed, low Ultralite Supercoat mouldings have a similar density and weight to Ponderosa Pine. emitting, and recycled wood products, including • NO GRAIN-RAISE, FINGERJOINTS OR KNOTS our new SPERO™ moulding line. Will not show defects that often are visible with paint-grade Pine - such as open joints (fingerjoints and edgeglued), and grain-raise. In addition, we are setting up Sustainable Operating • BETTER WORKABILITY THAN OTHER MDF MOULDINGS Ultralite mouldings cut, cope, miter, and staple better than most other MDF mouldings, Standards, which includes responsible manufacturing and will not “volcano” when nailing. • SUPERB PRIME COATING processes, chain of custody certifi cations, recycling Finished with a unique two-coat process that gives a superior primed top coat. programs, energy reduction programs, low carbon • EXCELLENT DIMENSIONAL STABILITY Will not twist or split like natural wood. emission vehicle fl eets, and memberships to • COMPETITIVE PRICING regional and national “Green” councils. Stable price below primed fingerjoint mouldings. Moulding & Millwork, through our manufacturing Create Your Own Custom Look facilities and affi liates, have the ability to provide
    [Show full text]
  • Micro-Mark #80996 Dado Washer Set for Original Microlux Table
    INSTRUCTIONS FOR INSTRUCTIONS FOR #80996 DADO WASHER SET #80996 DADO WASHER SET FOR USE ON THE MICROLUX TILT ARBOR TABLE SAW FOR USE ON THE MICROLUX TILT ARBOR TABLE SAW WITH STANDARD BLADE ONLY WITH STANDARD BLADE ONLY These special washers are tapered. When installed behind the blade, These special washers are tapered. When installed behind the blade, the blade will wobble as it rotates and cut a wide groove, called a dado. the blade will wobble as it rotates and cut a wide groove, called a dado. Select a washer from the chart below: Select a washer from the chart below: DADO WIDTH WASHER NUMBER DADO WIDTH WASHER NUMBER 1/16” 2 1/16” 2 3/32” 3 3/32” 3 1/8” 4 1/8” 4 3/16” 5 3/16” 5 To install the washer, first remove the blade guard from the machine. To install the washer, first remove the blade guard from the machine. It will not be used during dado cutting, so extreme caution must be It will not be used during dado cutting, so extreme caution must be exercised when performing these cutting operations. Be sure to exercised when performing these cutting operations. Be sure to reinstall the guard when standard cutting operations are later resumed. reinstall the guard when standard cutting operations are later resumed. Next, following the instructions in the saw manual, remove the blade. Next, following the instructions in the saw manual, remove the blade. Install the dado washer you selected on the mandrel, then reinstall the Install the dado washer you selected on the mandrel, then reinstall the blade (see illustration below).
    [Show full text]
  • Making Stub-Tenon Doors
    Making Stub-tenon Doors The stub-tenon joint will never be the super- hero of your joinery arsenal because it doesnʼt have the stuff necessary to be a strong joint. The mating parts are short (hence the “stub” moniker) and itʼs housed on only two sides: the face cheeks of the tenon. There is sufficient glue surface, but the cross-grain orientation compromises the glue joint. In the pantheon of woodworking joints, the stub-tenon joint may be more accurately described as a 90-pound weakling. But even so, this can be sufficient for smaller, lightweight doors that donʼt take a lot of abuse. For example, you wouldnʼt choose this joint for kitchen cabinet doors or built-ins for the kidsʼ playroom. But itʼs OK to use a stub-tenon door for a vanity cabinet or for a project thatʼs built as much for looks as it is for service. Once a door weighs more than four or five pounds, or is larger than 18" x 24", you must abandon the stub-tenon joint for a more substantial one. Mortise-and-tenon construction, dowels, loose tenons and even biscuit joints are superior choices for larger, heavier doors. So why use a stub-tenon joint? Well, itʼs easy to make because it requires a minimal amount of setup time regardless of the method you choose to cut the joint. Itʼs usually cut with a router in a table or on the table saw using a stack dado set. The ease of setup is because the same groove thatʼs cut to receive the panel doubles as the groove for the stub tenon.
    [Show full text]
  • Four Good Ways to Build Drawers
    FourFour GoodGood WaysWays toto BuildBuild DrawersDrawers Our staff offers simple, strong and fast ways to make this important furniture component. n woodworking magazines, books and plans a method of drawer-making. To remedy this prob- there’s almost always an omission that’s big lem, we’ve come up with four good techniques for Ienough to drive a truck through: How to build building drawers that our editors have refined after the drawers for the project. years of shop work. Usually the woodworking author (always well-in- Each method has its pros and cons. But based tended, I can assure you) writes instructions such as: on your skill level and your particular set of tools, “Build the drawers using your method of choice.” there is likely something here you can use for your Well that’s all well and good unless you’re like a woodworking. Before we discuss the differences of lot of woodworkers who have never actually chosen each method, here are the similarities. By Christopher Schwarz & David Thiel Comments or questions? Contact Christopher at 513-531-2690 ext. 1407 or [email protected]. Contact David at ext. 1255 or [email protected] ParrishAl by Photo Drawer Basics Hand-cut Dovetails SLIDING DOVETAIL DRAWERS When designing a drawer and This is the traditional, and many Sliding dovetails aren’t just for building coming up with a cutting list, here would argue, the strongest way bookcases. This technique works are some rules we follow. to make a drawer. Traditional extremely well for constructing In general, the drawer front drawers have through-dovetails drawers that will be mounted should be 3⁄4" thick – unless it’s a at the back of the box and half- with mechanical drawer slides.
    [Show full text]
  • The Gougeon Brothers on Boat Construction
    The Gougeon Brothers on Boat Construction The Gougeon Brothers on Boat Construction Wood and WEST SYSTEM® Materials 5th Edition Meade Gougeon Gougeon Brothers, Inc. Bay City, Michigan Gougeon Brothers, Inc. P.O. Box 100 Patterson Avenue Bay City, Michigan, 48707-0908 Editor: Kay Harley Technical Editors: Brian K. Knight and Tom P. Pawlak Designer: Michael Barker Copyright © 2005, 1985, 1982, 1979 by Gougeon Brothers, Inc. P.O. Box 908, Bay City, Michigan 48707, U. S. A. First edition, 1979. Fifth edition, 2005. Except for use in a review, no part of this publication may be reproduced or used in any form, or by any means, electronic or manual, including photocopying, recording, or by an information storage and retrieval system without prior written approval from Gougeon Brothers, Inc., P.O. Box 908, Bay City, Michigan 48707-0908, U. S. A., 866-937-8797 The techniques suggested in this book are based on many years of practical experience and have worked well in a wide range of applications. However, as Gougeon Brothers, Inc. and WEST SYSTEM, Inc.will have no control over actual fabrication, any user of these techniques should understand that use is at the user’s own risk. Users who purchase WEST SYSTEM® products should be careful to review each product’s specific instructions as to use and warranty provisions. LCCN 00000 ISBN 1-878207-50-4 Cover illustration by Michael Barker. Layout by Golden Graphics, Midland, Michigan. Printed in the United States of America by McKay Press, Inc., Midland, Michigan. Contents Preface . ix Acknowledgments . xi Chapter 1 Introduction–Gougeon Brothers and WEST SYSTEM® Epoxy .
    [Show full text]