DOCSLIB.ORG

Face Masks, Eyewear and N95 Respirators Every Protection Level and Preference Choose the Right Mask for Every Procedure

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Face Masks, Eyewear and N95 Respirators Every Protection Level and Preference Choose the Right Mask for Every Procedure Face masks, eyewear and N95 respirators Every protection level and preference Choose the right mask for every procedure Different procedures require different levels of protection, and ASTM standards make it easy for your staff to get the ideal face mask for any procedure-and for every preference. Measuring fluid resistance, filtration and breathability, ASTM categorizes masks into three levels ASTM Level 1 ASTM Level 2 ASTM Level 3 For procedures producing For procedures producing For procedures producing low amounts of fluid, spray light to moderate amounts moderate to heavy amounts and/or aerosols. of fluid, spray and/or aerosols. of fluid, spray and/or aerosols. Fluid Fluid resistance Fluid resistance resistance LEVEL 1 LEVEL 2 LEVEL 3 2 Medline To meet ASTM F2100-19 standards, our masks undergo a series of tests for particle filtration (PFE), bacterial filtration (BFE), differential pressure or breathability (∆P) and fluid resistance. Level 1 Level 2 Level 3 Low fluids Light to moderate fluids Moderate to high fluids PFE at 0.1 micron ≥95% ≥98% ≥98% ASTM F2299 BFE at 3.0 micron ≥95% ≥98% ≥98% ASTM F2101 Delta P (∆P) mm H 0/cm2 2 <5 <6 <6 MIL-M-36954C Fluid resistance ≥80 mm Hg (mmHg) ≥80 mm Hg ≥120 mm Hg ≥160 mm Hg Flammability Class 1 Class 1 Class 1 How small is a micron? Fluid resistance Tests penetration resistance to While an actual micron is not visible to the human eye, synthetic blood at three protection this magnified diagram demonstrates particulate size levels—80 mm Hg, 120 mm Hg and by comparing a micron to other common substances. 160 mm Hg. One micron Bacteria–2 microns Particle filtration efficiency (PFE) Assesses filtration ability when White blood cell tested against sub-micron particulate 8 microns matter 0.1 microns in size—which is representative of some viruses. Pollen—30 microns Lower limit of visibility 40 microns Bacterial filtration efficiency (BFE) Tests filtration ability against an aerosol containing bacteria 3.0 microns in size. Human hair 70 microns Differential Pressure (∆P) Grain of table salt Gauges air flow from one side of 100 microns a mask to the other, assessing breathability. Scale is approximate. 1-800-MEDLINE (633-5463) | medline.com 3 Made for comfort and protection We know how much of your day is spent behind a mask, so we make ours with the most comfortable, effective materials possible. Smooth cellulose—used for inner Soft spunbond polypropylene—used and outer facings for inner and outer facings and for an extra layer of protection Meltblown middle layer—acts as the Silky thermalbond polypropylene— primary filtration system for the mask used for inner facings 4 Medline Our ASTM level 3 face masks are constructed of four layers for protection, comfort and breathability. Layer 1—the Layer 2—protects Layer 3—minimizes Layer 4—soft, colored layer is against fluid particle dispersal non-abrasive inner your first line of while maintaining for the ultimate layer makes the defense breathability layer of defense mask comfortable on your skin 4 Procedure 7 Surgical 12 Specialty 13 Eyewear 14 N95 Respirators 1-800-MEDLINE (633-5463) | medline.com 5 Procedure face masks Procedure face masks face Procedure NON27381 NON27120 NON27122 Cone mask Basic procedure mask Basic procedure mask 100% Polyester Spunbond polypropylene outer, Spunbond polypropylene outer, • Headband cellulose inner thermalbond polypropylene inner • Molded style • Earloop style • Earloop style 50/bx, 6 bx/cs 50/bx, 6 bx/cs 50/bx, 6 bx/cs NON27375 NON27378 NON27420EL Basic procedure mask Basic procedure mask Procedure mask with shield Spunbond polypropylene outer, Spunbond polypropylene outer, Spunbond polypropylene outer, cellulose inner thermalbond polypropylene inner thermalbond polypropylene inner • Earloop style • Earloop style • Earloop style • Anti-fog foam 50/bx, 6 bx/cs 50/bx, 6 bx/cs • Anti-glare strip • Anti-fog shield 25/bx, 4 bx/cs 6 Medline Fluid Fluid Fluid resistance resistance resistance LEVEL 1 LEVEL 1 LEVEL 3 Procedure masks face NON27355 NON27408EL NON27412EL Low fluid protection Low fluid protection Maximum fluid protection procedure mask procedure mask procedure mask Spunbond Polypropylene Cellulose inner and outer Spunbond polypropylene outer, outer and inner • Level 1 fluid resistant thermalbond polypropylene inner • Level 1 fluid resistant • Anti-fog foam • Level 3 fluid resistant • Earloop style • Earloop style • Anti-fog foam • Earloop style 50/bx, 6 bx/cs 50/bx, 6 bx/cs 50/bx, 6 bx/cs Fluid Fluid Fluid resistance resistance resistance LEVEL 3 LEVEL 3 LEVEL 3 NON27712EL NON27410EL NON27710EL Maximum Fluid Protection Maximum fluid protection Maximum fluid protection Procedure Mask procedure mask with shield procedure mask with shield Cellulose inner and outer Spunbond Polypropylene outer, Cellulose inner and outer • Level 3 fluid resistant thermalbond polypropylene inner • Level 3 fluid resistant • Anti-fog foam • Level 3 fluid resistant • Earloop style • Earloop style • Earloop style • Anti-fog foam 50/bx, 6 bx/cs • Anti-fog foam • Anti-glare strip • Anti-glare strip • Anti-fog shield • Anti-fog shield 25/bx, 4 bx/cs 25/bx, 4 bx/cs 1-800-MEDLINE (633-5463) | medline.com 7 Surgical face masks Surgical masks face NON27402 NON27377 NON27385 Basic surgical mask Basic surgical mask Hypoallergenic surgical mask Spunbond polypropylene outer, Spunbond polypropylene outer, Cellulose inner and outer cellulose inner thermalbond polypropylene inner • Ties • Ties • Ties 50/bx, 6 bx/cs 50/bx, 6 bx/cs 50/bx, 6 bx/cs NON27386 NON27371A NON27361A Sensitive skin surgical mask Adhesive surgical mask Aggressive adhesive Spunbond polypropylene outer, Spunbond polypropylene outer, surgical mask thermalbond polypropylene inner cellulose inner Spunbond polypropylene outer, • Ties • Ties cellulose inner • Adhesive anti-fog strip 50/bx, 6 bx/cs • Ties 50/bx, 6 bx/cs • Aggressive adhesive anti-fog strip 50/bx, 6 bx/cs 8 Medline Surgical face masks face Surgical NON27379A NON27382 NON27373A Film surgical mask Duckbill surgical mask Duckbill surgical mask Spunbond polypropylene outer, Spunbond polypropylene outer, Spunbond polypropylene outer, cellulose inner thermalbond polypropylene inner cellulose inner • Ties • Ties • Ties • Anti-fog film strip • Chamber style • Anti-fog foam • Chamber style 50/bx, 6 bx/cs 50/bx, 6 bx/cs 50/bx, 6 bx/cs Fluid resistance LEVEL 1 NON27411 NON27378A NON27600 Duckbill surgical mask with shield Comfort foam surgical mask Horizontal surgical mask Spunbond polypropylene outer, Cellulose inner and outer Spunbond Polypropylene outer, cellulose inner • Ties thermalbond polypropylene inner • Ties • Comfort anti-fog foam strip • Horiztonal ties • Anti-fog foam 50/bx, 6 bx/cs 50/bx, 6 bx/cs • Anti-glare strip • Anti-fog shield • Chamber style 25/bx, 4 bx/cs 1-800-MEDLINE (633-5463) | medline.com 9 Surgical face masks Fluid resistance LEVEL 1 Surgical face masks face Surgical NON27600AG NON27420 NON27408 Horizontal surgical Basic surgical mask with shield Low fluid protection mask with shield Spunbond Polypropylene outer, surgical mask Spunbond polypropylene outer, thermalbond polypropylene inner Cellulose inner and outer cellulose inner • Ties • Level 1 fluid resistant • Horizontal ties • Anti-fog foam • Ties • Anti-fog foam • Anti-glare strip • Anti-fog foam • Anti-fog shield • Anti-glare shield 50/bx, 6 bx/cs 25/bx, 4 bx/cs 25/bx, 4 bx/cs Fluid Fluid Fluid resistance resistance resistance LEVEL 2 LEVEL 2 LEVEL 1 NON27405 NON27382FR NON27411AG Low fluid protection Medium fluid protection Medium fluid protection duckbill surgical mask with shield duckbill surgical mask surgical mask with shield Cellulose inner and outer Spunbond polypropylene outer, Spunbond polypropylene outer, • Level 1 fluid resistant thermalbond polypropylene inner thermalbond polypropylene inner • Anti-fog foam • Level 2 fluid resistant • Level 2 fluid resistant • Anti-glare strip • Anti-fog foam • Anti-fog foam • Anti-fog shield • Duckbill style • Anti-glare strip • Anti-glare shield 25/bx, 4 bx/cs 50/bx, 6 bx/cs • Duckbill style 25/bx, 4 bx/cs 10 Medline Fluid Fluid Fluid resistance resistance resistance LEVEL 3 LEVEL 3 LEVEL 3 Surgical masks face NON27412 NON27712 NON27410 Maximum fluid protection Maximum fluid protection Maximum fluid protection surgical mask surgical mask surgical mask with shield Spunbond polypropylene outer, Cellulose inner and outer Spunbond Polypropylene outer, thermalbond polypropylene inner • Level 3 fluid resistant thermalbond polypropylene inner • Level 3 fluid resistant • Ties • Level 3 fluid resistant • Ties • Anti-fog foam • Anti-fog foam • Anti-fog foam 50/bx, 6 bx/cs • Anti-glare strip • Anti-fog shield 50/bx, 6 bx/cs 25/bx, 4 bx/cs Fluid Fluid resistance resistance LEVEL 3 LEVEL 3 NON27710 NON27810 Maximum fluid protection Maximum fluid protection surgical mask with shield surgical mask with shield Cellulose inner and outer Cellulose inner and outer • Level 3 fluid resistant • Level 3 fluid resistant • Anti-fog foam • Anti-fog foam • Anti-glare strip • Anti-glare strip • Anti-fog shield • Anti-fog shield 25/bx, 4 bx/cs 25/bx, 10 bx/cs 1-800-MEDLINE (633-5463) | medline.com 11 Specialty face masks Specialty masks face NONBUDDYTIE NONRIBBON Buddy the Brave print Pink ribbon surgical tie mask surgical tie mask NONRIBBONEL NONBUDDYEL Pink ribbon basic procedure mask Buddy the Brave print Cellulose inner and outer procedure mask 50/bx, 6 bx/cs Spunbond polypropylene outer, thermalbond polypropylene inner 50/bx, 6 bx/cs CUR380 CURAD® extra-small face mask Spunbond polypropylene outer, thermalbond
Load more

Recommended publications
  • Learning About Masks
    Learn more about MASKS Did you know ?? Some masks and respirators have How are types of masks different? exhalation valves. These are not acceptable during COVID because they can release viral particles in the air. Cloth Mask2,3 Procedure Mask1,2 N95 Respirator1,2 Pros Pros Pros • Keeps other safe by preventing • May offer some additional protection • Dense filter exhalation of viral particles if others don’t mask • Filters airborne particles and droplets • Washable and reusable • Medical grade certfied • Medical grade certfied • Easy to make on your own • Affordable and disposable Cons Cons Cons • Harder to breathe • Not designed for multiple uses • Less filtration • Healthcare providers need them • Healthcare providers need them • No airborne particle protection • Require training to wear properly • Susceptible to some droplets • Doesn’t filter airborne particles Affordability Affordability Affordability Reusability Reusability Reusability Protection Protection Protection Comfort level Comfort level Comfort level 2020 Emory University, created by Visual Medical Education. Updated July 30, 2020 The materials are intended solely for general educational and information purposes, are made available in the context of the public health emergency related to the coronavirus (COVID-19) and have not been subject to review that typically would occur in a non-emergent situation. The materials do not constitute the provision of medical, legal or other Creative Commons Attribution-NonCommercial-NoDerivs professional advice. EMORY UNIVERSITY AND EMORY HEALTHCARE MAKE NO WARRANTIES, EXPRESS OR IMPLIED AS TO THE MATERIALS, INCLUDING, WITHOUT LIMITATION, COMPLIANCE WITH QUALITY, REGULATORY, ACCREDITATION OR STANDARDS OF CARE. EMORY EXPRESSLY DISCLAIMS ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
    [Show full text]
  • Rationale for Mass Masking in Controlling the COVID-19 Pandemic
    PERSPECTIVE published: 24 August 2021 doi: 10.3389/fpubh.2021.665708 Rationale for Mass Masking in Controlling the COVID-19 Pandemic Shing Yau Tam 1, Victor C. W. Tam 1, Helen K. W. Law 1, May Ling Khaw 2 and Shara W. Y. Lee 1* 1 Department of Health Technology and Informatics, Faculty of Health and Social Sciences, The Hong Kong Polytechnic University, Kowloon, China, 2 Tasmanian School of Medicine, University of Tasmania, Hobart, TAS, Australia The rapid spread of the coronavirus disease 2019 (COVID-19) into a global pandemic caught the world unprepared. Previously effective measures for containing disease outbreaks were overwhelmed, necessitating strict controls such as lockdowns or curfews. Among the disease control interventions, community mass masking was one of the highly controversial issues with differing opinions on its indications or effectiveness from different health authorities around the world. Regions where community mass masking was timely introduced were associated with lower transmission rates, and more effective disease control. In this article, we discuss the evidence on the effectiveness, and rationale for community mass masking to prevent the COVID-19 transmission. Areas for further research to define the role of mass masking in light of the COVID-19 pandemic will be suggested. This would help policy makers in formulating mass masking policies. Edited by: Bach Tran, Keywords: COVID-19, pandemic, public health, public health policy, face mask, infection control, mass masking Hanoi Medical University, Vietnam Reviewed by: Sukanta Sarkar, INTRODUCTION Indian Institute of Technology Ropar, India The coronavirus disease 2019 (COVID-19) is the result of infection by the novel severe Supa Pengpid, acute respiratory syndrome coronavirus 2 (SARS-CoV2), making this the third coronavirus to Mahidol University, Thailand have crossed species and cause severe disease in humans.
    [Show full text]
  • Universal PPE Guidelines and Faqs (As of August 2, 2021)
    Universal PPE Guidelines and FAQs (as of August 2, 2021) Guidance was issued on July 27, 2021, by the Centers for Disease Control and Prevention (CDC) that raises concerns of increased COVID-19 transmission due to the Delta variant. As a result, in alignment with the CDC, Nebraska Medicine is making modifications to the Universal PPE Guidelines to support the increasing numbers of COVID-19 cases in the community. Vaccination remains the most effective way to prevent transmission of disease and is the only way to prevent severe illness with risk of hospitalization and death. Guidance will be updated and/or expanded based on the level of community spread of COVID- 19, the proportion of the population that is fully vaccinated, the rapidly evolving science on COVID-19 vaccines, the understanding of COVID-19 variants and employee health data related to COVID-19 exposure. For the purposes of this document, people are considered fully vaccinated after receiving the full series of the following COVID-19 vaccines: Pfizer/BioNTech, Astrazeneca-SK Bio, Serum Institute of India, Johnson and Johnson (J&J/Janseen), Moderna, Novavax, Sinovac, and Sinopharm Key Points Applicable for ALL Nebraska Medicine Sites: Regardless of vaccination status: o Masks will be required in all clinical settings. o Masks will be required whenever a colleague is indoors in the presence of a patient and/or visitor. o Masks must be doffed and discarded when leaving a droplet/contact precautions isolation room. A new mask must be donned by the colleague immediately after leaving this type of isolation. When masks are used for droplet precautions, the mask becomes contaminated during patient encounters via large droplet particle transmission.
    [Show full text]
  • Mask Use in the Context of COVID-19 Interim Guidance 1 December 2020
    Mask use in the context of COVID-19 Interim guidance 1 December 2020 This document, which is an update of the guidance published patients wear the following types of mask/respirator in on 5 June 2020, includes new scientific evidence relevant to addition to other personal protective equipment that are the use of masks for reducing the spread of SARS-CoV-2, the part of standard, droplet and contact precautions: virus that causes COVID-19, and practical considerations. It ­ medical mask in the absence of aerosol contains updated evidence and guidance on the following: generating procedures (AGPs) • mask management; ­ respirator, N95 or FFP2 or FFP3 standards, or • SARS-CoV-2 transmission; equivalent in care settings for COVID-19 • masking in health facilities in areas with community, patients where AGPs are performed; these may cluster and sporadic transmission; be used by health workers when providing care • mask use by the public in areas with community and to COVID-19 patients in other settings if they cluster transmission; are widely available and if costs is not an issue. • alternatives to non-medical masks for the public; • In areas of known or suspected community or cluster • exhalation valves on respirators and non-medical masks; SARS-CoV-2 transmission WHO advises the following: • mask use during vigorous intensity physical activity; ­ universal masking for all persons (staff, patients, visitors, service providers and others) within the • essential parameters to be considered when health facility (including primary, secondary manufacturing non-medical masks (Annex). and tertiary care levels; outpatient care; and Key points long-term care facilities) ­ wearing of masks by inpatients when physical • The World Health Organization (WHO) advises the use distancing of at least 1 metre cannot be of masks as part of a comprehensive package of maintained or when patients are outside of their prevention and control measures to limit the spread of care areas.
    [Show full text]
  • Guidance for the Selection and Use of PPE in the Healthcare Setting
    Guidance for the Selection and Use of Personal Protective Equipment (PPE) in Healthcare Settings 1 PPE Use in Healthcare Settings: Program Goal Improve personnel safety in the healthcare environment through appropriate use of PPE. PPE Use in Healthcare Settings The goal of this program is to improve personnel safety in the healthcare environment through appropriate use of PPE. 2 PPE Use in Healthcare Settings: Program Objectives • Provide information on the selection and use of PPE in healthcare settings • Practice how to safely don and remove PPE PPE Use in Healthcare Settings The objectives of this program are to provide information on the selection and use of PPE in healthcare settings and to allow time for participants to practice the correct way to don and remove PPE. 3 Personal Protective Equipment Definition “specialized clothing or equipment worn by an employee for protection against infectious materials” (OSHA) PPE Use in Healthcare Settings Personal protective equipment, or PPE, as defined by the Occupational Safety and Health Administration, or OSHA, is “specialized clothing or equipment, worn by an employee for protection against infectious materials.” 4 Regulations and Recommendations for PPE • OSHA issues workplace health and safety regulations. Regarding PPE, employers must: – Provide appropriate PPE for employees – Ensure that PPE is disposed or reusable PPE is cleaned, laundered, repaired and stored after use • OSHA also specifies circumstances for which PPE is indicated • CDC recommends when, what and how to use PPE PPE Use in Healthcare Settings OSHA issues regulations for workplace health and safety. These regulations require use of PPE in healthcare settings to protect healthcare personnel from exposure to bloodborne pathogens and Mycobacterium tuberculosis.
    [Show full text]
  • Manufacturers of Surgical Masks; Health Care Personnel; Hospital Purchasing Departments; Authorized Distributors and Authorized Importers; and Any Other Stakeholders
    August 5, 2020 To: Manufacturers of Surgical Masks; Health Care Personnel; Hospital Purchasing Departments; Authorized Distributors and Authorized Importers; and Any Other Stakeholders The U.S. Food and Drug Administration (FDA) is issuing this Emergency Use Authorization (EUA) in response to concerns relating to the insufficient supply and availability of disposable, single-use surgical masks1,2 (hereafter also referred to as “surgical masks”) for use in healthcare settings by health care personnel (HCP)3 as personal protective equipment (PPE)4 to provide a physical barrier to fluids and particulate materials to prevent HCP exposure to respiratory droplets and large particles during surgical mask shortages resulting from the Coronavirus Disease 2019 (COVID-19) pandemic, pursuant to section 564 of the Federal, Food, Drug, and Cosmetic Act (the Act) (21 U.S.C. 360bbb-3). On February 4, 2020, pursuant to Section 564(b)(1)(C) of the Act, the Secretary of the Department of Health and Human Services (HHS) determined that there is a public health emergency that has a significant potential to affect national security or the health and security of United States citizens living abroad, and that involves the virus that causes COVID-19.5 1 A surgical mask is a mask that covers the user’s nose and mouth and provides a physical barrier to fluids and particulate materials. Surgical masks are generally regulated by FDA as Class II devices under 21 CFR 878.4040 – Surgical apparel. 2 FDA-cleared surgical face masks, non-surgical face masks, surgical masks with antimicrobial/antiviral agent, and all particulate filtering facepiece respirators are not within the scope of this authorization.
    [Show full text]
  • Respiratory Infection Control: Respirators Versus Surgical Masks
    FactSheet Respiratory Infection Control: Respirators Versus Surgical Masks It is important that employers and workers understand the significant differences between these two types of personal protective equipment. The decision whether or not to require workers to use either surgical masks or respirators must be based upon a hazard analysis of the workers’ specific work environments and the different protective properties of each type of personal protective equipment. The use of surgical masks or respirators is one practice that may reduce the risk of infectious disease transmission between infected and noninfected persons. Since there is limited historical information on the effectiveness of surgical masks and respirators for the control of influenza during any previous pandemics, the effectiveness of surgical masks and respirators has been inferred on the basis of the mode of influenza transmission, particle size and professional judgment. To offer protection, both surgical masks and respirators need to be worn correctly and consistently. If used properly, surgical masks and respirators both have a role in preventing who have influenza‑like symptoms. These different types of exposures. During an influenza generally include those workers who work in pandemic, surgical masks and respirators need occupations classified as very high exposure to be used in conjunction with interventions that risk or high exposure risk to pandemic influenza. are known to prevent the spread of infection, For additional information on very high and such as engineering and administrative controls high exposure risk occupations, please refer to (e.g., installing sneeze guards, teleworking) OSHA’s Guidance on Preparing Workplaces for and work practices (e.g., cough etiquette, hand an Influenza Pandemic at www.osha.gov/SLTC/ hygiene, and avoiding large gatherings).
    [Show full text]
  • Proposed Approach for Reusing Surgical Masks in Covid-19 Pandemic
    Proposed Approach for Reusing Surgical Masks in Covid-19 Pandemic Yuangang Liu, PhD Sancy Leachman, MD PhD Anna Bar, MD Department of Dermatology Oregon Health & Science University Portland, OR 97239 Face mask protection blocks and absorbs virus on the mask fiber filter Coronavirus: 0.1μm Pore size of N95: 0.1 -0.3 μm Pore size of standard surgical mask: 0.3-10 μm The filtration efficiency of mask is determined by the meltblown polypropylene fabric of the middle layer 215 Co - 260 Co Polypropylene meltblown polypropylene Polypropylene filter should be stable at elevated temperatures Rationale for Wearing a Face Mask 1. Covid-19 is an airborne disease 2. The half life of viable SARS-CoV2 in aerosol is more than one hour (Van Doremalen N, et al. NEJM, 2020) 3. There is a large population of asymptomatic carriers (Li R, et al. Science, 2020) 4. Salivary viral load is highest during the first week after symptom onset (To K. K-W, et al. The Lancet, 2020) 5. Covid-19 infection trajectory has plateaued in areas where wearing a face mask is popular (South Korea, Japan and China) 6. If effective, may help to more rapidly alleviate the pressure of physical quarantine Additional Rationale for Wearing Surgical Masks At Work 1. Reduces viral spread from asymptomatic carriers 2. Reduces touching mouth and nose 3. Reduces respiratory system access 4. Reduces viral transmission from asymptomatic medical professionals to patients and colleagues Frequent handwashing, wearing masks, wearing gloves, and wearing gowns all found to decrease the spread of respiratory viruses in meta-analysis BMJ Oct 2007 Severe surgical mask shortage exists 1.
    [Show full text]
  • Handout Surgical Masks Are Not Respirators
    FactSheet Respiratory Infection Control: Respirators Versus Surgical Masks It is important that employers and workers understand the significant differences between these two types of personal protective equipment. The decision whether or not to require workers to use either surgical masks or respirators must be based upon a hazard analysis of the workers’ specific work environments and the different protective properties of each type of personal protective equipment. The use of surgical masks or respirators is one practice that may reduce the risk of infectious disease transmission between in- fected and noninfected persons. Since there is limited historical information on the effec- tiveness of surgical masks and respirators for the control of influenza during any previous pandemics, the effectiveness of surgical masks and respirators has been inferred on the basis of the mode of influenza transmis- sion, particle size and professional judgment. To offer protection, both surgical masks and respirators need to be worn correctly and consistently. If used properly, surgical masks and respirators both have a role in prevent- ing different types of exposures. During an who have influenza-like symptoms. These influenza pandemic, surgical masks and res- generally include those workers who work in pirators need to be used in conjunction with occupations classified as very high exposure interventions that are known to prevent the risk or high exposure risk to pandemic in- spread of infection, such as engineering and fluenza. For additional information on very administrative controls (e.g., installing sneeze high and high exposure risk occupations, guards, teleworking) and work practices (e.g., please refer to OSHA Publication No.
    [Show full text]
  • COVID-19 Airway Protection PPE Overview DOCUMENT INTENDED to PROVIDE INSIGHT BASED on CURRENTLY AVAILABLE INFORMATION for CONSIDERATION and NOT SPECIFIC ADVICE
    COVID-19 airway protection PPE overview DOCUMENT INTENDED TO PROVIDE INSIGHT BASED ON CURRENTLY AVAILABLE INFORMATION FOR CONSIDERATION AND NOT SPECIFIC ADVICE Update: May 6, 2020 CONFIDENTIAL AND PROPRIETARY Any use of this material without specific permission of McKinsey & Company is strictly prohibited Current as of May 4, 2020 COVID-19 is, first and foremost, Solving the humanitarian a humanitarian challenge. challenge is the top priority. Thousands of health professionals Much remains to be done globally are heroically battling the virus, to prepare, respond, and recover, putting their own lives at risk. from protecting populations at risk Governments and industry are to supporting affected patients, working together to understand families, and communities to and address the challenge, support developing a vaccine. To address victims and their families and this crisis, responses must be communities, and search for informed by evidence and based treatments and a vaccine. on partnership among various stakeholders and sectors, including the medical-product industry and regulatory/compliance agencies. DOCUMENT INTENDED TO PROVIDE INSIGHT BASED ON CURRENTLY AVAILABLE INFORMATION FOR CONSIDERATION AND NOT SPECIFIC ADVICE McKinsey & Company 2 Current as of May 4, 2020 These materials are preliminary and non- The insights and concepts included in Particularly in light of rapidly evolving exhaustive and are being made available these materials have not been validated or conditions, these materials are provided on a non-exclusive basis solely for independently verified. References to “as is” without any representation or information purposes in response to the specific products or organizations are warranty, and all liability is expressly urgent need for measures to address the solely for illustration and do not constitute disclaimed for any loss or damage of any COVID-19 crisis.
    [Show full text]
  • 3M Respirators and Surgical Mask Comparison
    3M General Offices 3M Center St. Paul, MN 55144-1000 12.28.05 Respirators and Surgical Masks: A Comparison Because certain disposable respirators are similar in appearance to many surgical/procedure masks, their differences are not always well understood. However, respirators and surgical masks are very different in intended use, fit against the face, wear time, testing and approval. The purpose of this document is to highlight some of these differences. The biggest difference between a respirator and a surgical mask is the intended use. Respirators are designed to help reduce the wearer’s respiratory exposure to airborne contaminants such as particles, gases or vapors. Particulate respirators may be used to reduce exposure to particles that are small enough to be inhaled - particles less than 100 microns (µm) in size. This includes airborne particles that may contain biological material, e.g. mold, Bacillus anthracis, Mycobacterium tuberculosis, the virus that causes Severe Acute Respiratory Syndrome (SARS), etc. Surgical masks do not have either adequate filtering or fitting attributes to provide respiratory protection for the wearer. They are designed to help prevent contamination of the work environment or sterile field from large particles generated by the wearer (e.g. spit, mucous). Surgical masks may also be used to help reduce the risk of splashes or sprays of blood, body fluids, secretions and excretions from reaching the wearer’s mouth and nose. Fit against the face is also an important differentiator. Respirators such as N95 filtering facepieces are designed to seal to the face of the wearer. Therefore most of the inhaled air is drawn through the filter media and not through gaps between the respirator and the wearer’s face.
    [Show full text]
  • The Effectiveness and Compliance of Surgical Face Mask Wearing in the Operating Suite Environment: an Integrated Review
    Volume 33 Issue 4 Article 2 11-9-2020 The effectiveness and compliance of surgical face mask wearing in the operating suite environment: An integrated review Noriko Ogo [email protected] Paula Foran [email protected] Follow this and additional works at: https://www.journal.acorn.org.au/jpn This work is licensed under a Creative Commons Attribution 4.0 License. Recommended Citation Ogo, Noriko and Foran, Paula (2020) "The effectiveness and compliance of surgical face mask wearing in the operating suite environment: An integrated review," Journal of Perioperative Nursing: Vol. 33 : Iss. 4 , Article 2. Available at: https://doi.org/10.26550/2209-1092.1105 https://www.journal.acorn.org.au/jpn/vol33/iss4/2 This Article is brought to you for free and open access by Journal of Perioperative Nursing. It has been accepted for inclusion in Journal of Perioperative Nursing by an authorized editor of Journal of Perioperative Nursing. Emerging scholar article Authors Noriko Ogo The effectiveness and compliance MCN (Perioperative Nursing), BN, RN, MACORN of surgical face mask wearing in Dr Paula Foran PhD, RN, FACORN, FACPAN, MACN the operating suite environment: An integrated review Abstract Problem identification: Surgical face masks have been used for over a century in the operating room (OR); firstly, as it has been believed that they may reduce surgical site infections (SSIs) in patients and, secondly, as personal protective equipment (PPE) for staff. However, recent studies have reported disparities in the efficacy of wearing surgical face masks including inconsistency in their use. This integrative review aims to investigate the effects of surgical masks in the OR, in regard to maintaining both patient and staff safety, and will discuss compliance or lack thereof in face mask usage for the entire multidisciplinary team.
    [Show full text]