DOCSLIB.ORG

Criminal Justice Our New Associate in Fine Arts in Degree Art Is for Students Who Plan to Transfer to Four-Year Colleges Or University

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Criminal Justice Our New Associate in Fine Arts in Degree Art Is for Students Who Plan to Transfer to Four-Year Colleges Or University 'ƌĞĞŶZŝǀĞƌŽŵŵƵŶŝƚLJŽůůĞŐĞ Fall Quarter Schedule Auburn . Enumclaw . Kent Classes begin on September 21, 2009 See page 3 The 2009–2011 Catalog is here! www.greenriver.edu Student Spotlight: Kyle Levy ZĞĂĚŚŝƐƐƚŽƌLJŽŶůŝŶĞĂƚ ǁǁǁ͘ŐƌĞĞŶƌŝǀĞƌ͘ĞĚƵͬƐƚƵĚĞŶƚƐƵĐĐĞƐƐ͘ at Green Get started River Apply Choose one of 3 easy ways: l Online by selecting “Apply Online” at www.greenriver.edu 1 l In person at the Main Campus (Zgolinski Welcome Center), Enumclaw Campus or Kent Campus l Call for an application at (253) 833-9111, ext. 2500 Determine your placement Take the COMPASS* at the Main Campus (Zgolinski Welcome Center), Enumclaw Campus or Kent Campus. For hours, cost and information go to www.greenriver.edu/assessmenttesting 2 or call (253) 833-9111, ext. 2650. *The COMPASS helps place you in the proper math, reading and writing course. It is not a pass or fail test. Money for college Familiarize yourself with the following resources and programs that provide funding assistance: l Our Web site at www.greenriver.edu/moneyforcollege l Financial Aid, Main Campus (Lindbloom Student Center, Room 231), 3 (253) 833-9111, ext. 2449, fi[email protected] l Workforce Education, Main Campus (Science, Math, Technology building, Room 122), (253) 833-9111, ext. 2211, [email protected] l Tuition Payment Plan, Main Campus (Lindbloom Student Center, Room 274), (253) 833-9111, ext. 2500, [email protected] Advising & registration for classes Sign up for a New Student Advising session. Register for classes at one of the following: l In person at the Main Campus (Zgolinski Welcome Center), 4 Enumclaw Campus or Kent Campus l Online at www.greenriver.edu/edplanning/studentadvising l By calling (253) 833-9111, ext. 2641 5 Start classes! To receive this information in alternative format, please contact Disability 2 = Support Services at (253) 833-9111, ext. 2631; TTY (253) 288-3359. Registration information Registration dates—Fall quarter Hours of operation May 4-8 Priority registration by appointment only For information of hours of operation, go to: May 11 New student registration by appointment only www.greenriver.edu/hours May 12 Open registration Registration Sept. 21 Fall quarter classes begin 2009-2011 catalog available online at: Registration calendar—Fall quarter www.greenriver.edu/catalog Aug. 10 Tuition due date On campus at: Tuition due within 4 business days of registration Enrollment Services Student Life Info Center Enumclaw Campus Sept. 19 Last day to add name to waitlist (by 10:30 p.m.) Welcome Center Kent Campus International Programs Sept. 21 Fall classes begin Last day for 100% refund of tuition and fees Sept. 23 Last day to register for fall quarter without instructor Table of Contents signature 2EGISTRATIONINFORMATION............... 3 #REDITCLASSLISTINGS.............. Sept. 24 All registrations and adds require instructor signature – no 7EB2EGISTRATION ...................... #ONTINUING%DUCATION............. web registrations +EYTOCLASSLISTINGSANDLOCATIONS... %NUMCLAWCLASSLISTINGS ......... Senior Citizen discounts accepted E,EARNINGnCREDIT ..................... #AMPUSMAP....................... WA state employee waivers accepted #OMMON#OURSE.UMBERING ......... Sept. 25 Last day for 80% refund of tuition only – fees nonrefundable 3%TH3T !UBURN 7! Oct. 5 All late enrollments require instructor signature. !UBURNs %ASTSIDEs 4ACOMA $35 late fee applies to each course addition &AX sWWWGREENRIVEREDU Oct. 9 Last day for 40% refund of tuition only – fees nonrefundable 'REEN2IVER#OMMUNITY#OLLEGEn%NUMCLAW#AMPUS Last day to withdraw and not have class(es) posted 'RIFlN!VE %NUMCLAW 7! to permanent transcript %NUMCLAWs "UCKLEYAREA Oct. 19 In-Service Day (no day classes) &AX sWWWGREENRIVEREDUENUMCLAW Oct. 20 Last day to apply for residency reclassification 'REEN2IVER#OMMUNITY#OLLEGEn+ENT#AMPUS 2AMSAY7AY 3UITE +ENT 7! Nov. 4 Advising Day (no day classes) s&AX sWWWGREENRIVEREDUKENTCAMPUS Nov. 11 Veteran’s Day (campus closed) 'REEN2IVER#OMMUNITY#OLLEGEn!UBURN#ENTER Nov. 13 Last day to submit pass/non-credit petition to ND3T37 !UBURN 7! Enrollment Services s&AX Last day to complete official withdrawal from fall quarter All registration transactions must be completed #LASS3CHEDULEs6OLUME .UMBER5303 &ALL Nov. 26-27 Thanksgiving weekend begins (campus closed) Published quarterly by Green River Community College. Dec. 7 Study Day (no day classes) Periodicals postage paid at Auburn, WA. Dec. 8-10 Finals 0/34-!34%2 Send address changes to Green River Community College Class Schedule, 12401 SE 320th St., Auburn, WA 98092-3622. Dec. 10 Last day of instruction Green River Community College has made reasonable efforts to provide in this schedule Dec. 16 Grades available online information that is accurate at the time of publication. However, the college reserves the right to make appropriate changes in procedures, policies, calendars, requirements, programs, courses, and fees. When feasible, changes will be announced prior to their Registration dates—Winter quarter effective dates, but the college assumes no responsibility for giving any particular notice of any such changes. Nothing contained herein shall be construed to create any offer to Nov. 5-12 Priority registration for currently enrolled and returning contract or any contractual rights. students. Access your assigned registration time online. Green River Community College does not discriminate on the basis of race, color, national Register on or after your assigned time. origin, sex, sexual orientation, disability, marital status, religion, age or any other unlawful Nov. 12 New student registration begins for winter quarter basis in its programs and activities. The following person has been designated to handle inquiries regarding the non-discrimination policies: Vice President of Human Resources, Jan. 4 Winter quarter classes begin 12401 SE 320th Street, Auburn, WA 98092, (253) 288-3320. To receive this information in an alternative format, please contact Disability Support Services at (253) 833-9111, ext. 2631; TTY (253) 288-3359. For further information on how to register, call Green River Community Limitation of Liability: The college's total liability for claims arising from a contractual College at (253) 833-9111 in Auburn, (206) 464-6133 from Eastside or relationship with the student in any way related to classes or programs shall be limited to (253) 924-0180 from Tacoma and Puyallup, ext. 2500. the tuition and expenses paid by the student to the college for those classes or programs. In no event shall the college be liable for any special, indirect, incidental, or consequential TDD: (253) 288-3359. damages, including but not limited to, loss of earnings or profits. 3 Registration information Registration Courses of Interest Journalism Learn how to create your own visual story* and earn Business Management Video Editing (JOURN 107) five credits by signing up for Bring out the best in yourself and others. this fall. Take a Business Management class. This course also teaches you how to upload your video Learn critical business skills that are valued by to the Internet, how to use video-editing software and employers and business owners everywhere. You can much more. earn your AAA in Business Management or simply take a Enrollment is limited to 24 students. class to enhance your career. Classes are offered in: See page 52 for more information. z Leadership *Student stories will be featured on z Entrepreneurship The Current’s Web site. z Management and supervision z Marketing and sales Mathematics Questions? Please contact Jeff Perlot, Business Is your math class leaving you behind? Management instructor, at [email protected]. Green River is now offering you the opportunity to take Beginning Algebra (MATH 072) and Intermediate Algebra Drama (MATH 097) over a full year rather than two quarters. Acting Workshop (DRAMA 153) Advantages Get active! Get involved! Get acting! zMore time to learn important math concepts Learn and practice acting techniques, on stage. zSpend an entire year with the same teacher Enroll today! and students zOngoing enrollment for an entire year of math Online course – Contemporary zMath study skills will be taught along with content American Movies (DRAMA 121) Watch today’s films, with the Who should enroll? focus of cultural diversity zStudents who completed MATH 70 with a 2.5 or higher and cinematic excellence. but struggled. zStudents who have not passed MATH 72 with a 2.5 Earn five credits in or higher. Diversity or Humanities, zStudents who still need MATH 72 & 97 but want more and do the course at the time to complete them time of your choosing. For more information and to request a permission code, For more information, please e-mail Steve Kinholt at [email protected]. see page 41. The course is listed on page 54. 4 Registration information Student Resources Cool tools Registration Math Learning Center Science, Math and Technology Building, Room 355 The Math Learning Center (MLC) provides a variety of supplemental math learning resources including free drop-in tutorial assistance, math videos, computer tutorials, graphing programs, special interest math books and supplemental texts. The MLC also provides graphing calculator rentals on a quarterly basis. The MLC provides a friendly and supportive learning environment where you can study individually or in small groups. Writing Center Rutkowski Learning Center, Room 173 If you need assistance with writing assignments, cover letters, scholarship or college application essays and
Load more

Recommended publications
  • Make Measurement Matter 12 March 2020
    94 A-Z OF MEMBERS AND PROFILES 241 MAKE MEASUREMENT MATTER 12 MARCH 2020 The GTMA has teamed up with the successful Engineering Materials Live and FAST LIVE exhibitions, to deliver ‘Make Measurement Matter’ • QUALITY VISITORS • UNIQUE FORMAT • LOW COST Current attendees of the FAST LIVE and Engineering Materials Live events, compliment the Make Measurement Matter content, with visitors involved in production, design engineering, manufacturing, measurement, testing, quality and inspection. ATED WITH CO-LOC ATED WITH CO-LOC ATED WITH CO-LOC H 2020 12 MARC H 2020 0121 392 8994 12 [email protected] www.gtma.co.uk www.gtma.co.uk SUPPLIERSH DIREC 2020T ORY 12 MARC A-Z OF MEMBERS AND PROFILES 95 A-Z of members and members’ profiles INCLUDING: SECTORS AND MARKET SERVED BY INDIVIDUAL COMPANIES Find the right company for the right product and service. For up-to-date information please also see: www.gtma.co.uk 96 A-Z OF MEMBERS AND PROFILES 241 3D LASERTEC LTD Mansfield i-centre T 01623 600 627 Oakham Business Park W www.3dlasertec.co.uk Hamilton Way, Mansfield Nottinghamshire NG18 5BR Managing Director & Sales Contact: Wayne Kilford Sales Contact: Patrick Harrison Our customer base now extends through To see the laser machinery in operation Injection, blow, extrusion and rotational or to satisfy your queries related to laser moulds, pharmaceutical, Aerospace and engraving any special materials or indeed medical industry, gun manufacturers, general discussion relating to your project printing, ceramic plus other general and then call for an appointment. obscure requests. 3D Lasertec Ltd are privately owned and The need for laser engraving on projects established in February 1999.
    [Show full text]
  • Date Created Size MB . تماس بگیر ید 09353344788
    Name Software ( Search List Ctrl+F ) Date created Size MB برای سفارش هر یک از نرم افزارها با شماره 09123125449 - 09353344788 تماس بگ ریید . \1\ Simulia Abaqus 6.6.3 2013-06-10 435.07 Files: 1 Size: 456,200,192 Bytes (435.07 MB) \2\ Simulia Abaqus 6.7 EF 2013-06-10 1451.76 Files: 1 Size: 1,522,278,400 Bytes (1451.76 MB) \3\ Simulia Abaqus 6.7.1 2013-06-10 584.92 Files: 1 Size: 613,330,944 Bytes (584.92 MB) \4\ Simulia Abaqus 6.8.1 2013-06-10 3732.38 Files: 1 Size: 3,913,689,088 Bytes (3732.38 MB) \5\ Simulia Abaqus 6.9 EF1 2017-09-28 3411.59 Files: 1 Size: 3,577,307,136 Bytes (3411.59 MB) \6\ Simulia Abaqus 6.9 2013-06-10 2462.25 Simulia Abaqus Doc 6.9 2013-06-10 1853.34 Files: 2 Size: 4,525,230,080 Bytes (4315.60 MB) \7\ Simulia Abaqus 6.9.3 DVD 1 2013-06-11 2463.45 Simulia Abaqus 6.9.3 DVD 2 2013-06-11 1852.51 Files: 2 Size: 4,525,611,008 Bytes (4315.96 MB) \8\ Simulia Abaqus 6.10.1 With Documation 2017-09-28 3310.64 Files: 1 Size: 3,471,454,208 Bytes (3310.64 MB) \9\ Simulia Abaqus 6.10.1.5 2013-06-13 2197.95 Files: 1 Size: 2,304,712,704 Bytes (2197.95 MB) \10\ Simulia Abaqus 6.11 32BIT 2013-06-18 1162.57 Files: 1 Size: 1,219,045,376 Bytes (1162.57 MB) \11\ Simulia Abaqus 6.11 For CATIA V5-6R2012 2013-06-09 759.02 Files: 1 Size: 795,893,760 Bytes (759.02 MB) \12\ Simulia Abaqus 6.11.1 PR3 32-64BIT 2013-06-10 3514.38 Files: 1 Size: 3,685,099,520 Bytes (3514.38 MB) \13\ Simulia Abaqus 6.11.3 2013-06-09 3529.41 Files: 1 Size: 3,700,856,832 Bytes (3529.41 MB) \14\ Simulia Abaqus 6.12.1 2013-06-10 3166.30 Files: 1 Size: 3,320,102,912 Bytes
    [Show full text]
  • 3D Direct Modeling Software
    3D Direct Modeling Software MASTER YOUR GEOMETRY 1 Benefits 3 Animation 3 Rack & Pinion Constraint 3 Universal Joint Constraint 3 Point on curve constraint 4 Intermittent Motor Dialog 4 CAD Comparison 5 Photorealistic Rendering 6 File Open/Load Performance 6 Table of Contents Table Sheet Metal Flange 6 Interoperability 7 ACIS SAT/SAB R25 7 Inventor Version 2015 7 AutoCAD DWG/DXF 2015 7 CATIA V5 R24 7 Other Features and Improvements 7 3D Direct Modeling Software MASTER YOUR GEOMETRY 2 Benefits KeyCreator 2015 continues to add functionality and customer-driven enhancements to give its users unmatched productivity and flexibility for an efficient design-to-manufacture process. As the only remaining independent Direct CAD solution available, KeyCreator extends its use of Direct Modeling technology by now including KeyCreator Compare CAD Comparison tool as a standard feature. KeyCreator 2015 also includes many updates to file reading capabilities to support the latest file versions from major CAD vendors. Animation Enhanced Animation capabilities include: • Rack & Pinion Constraint • Universal Joint Constraint • Point on Curve Constraint • Intermittent Motor Dialog Users can now Export a Movie File of their animation replay for easier sharing. Several new and updated tutorial videos are also available on Kubotek University. Rack and Pinion Constraint example Universal Joint Constraint example 3D Direct Modeling Software MASTER YOUR GEOMETRY 3 Point on Curve Constraint example Intermittent Motor Dialog example 3D Direct Modeling Software MASTER YOUR GEOMETRY 4 CAD Comparison KeyCreator Compare has been enhanced and is now a standard tool found in KeyCreator 2015, making KeyCreator the first and only CAD system that can import, edit and compare dozens of native CAD files produced from other systems.
    [Show full text]
  • Article on the First Ten Years of Cax
    2009 Journal No. 1 Mechatronic Development – an Interdisciplinary Mechatronic Product Architecture Challenge Digital Factory ProSTEPProSTEP iViP Verein iViP Applications · Products Standards in Product Data Technology 16 Volume feiertSymposium 15. Geburtstag 2009 4 CONTENT Content Mechatronic Product Editorial . .3 Architecture In-House ProSTEP iViP Update – Put to the test . .5 ProSTEP iViP Symposium 2009 – Processes that encourage innovation . .6 Vehicle Electrics – End-to-End Process Support with the VEC . .12 Today, manufacturers of sophisticated technical products and their suppliers 10 Years of Interoperability: The CAx Implementor Forum . .13 face immense challenges driven by the increasing complexity of products, pro- cesses, and technology, and ever shorter Products time-to-market cycles. Many current development projects miss the targets IBM Product Lifecycle Management Solutions . .17 set for deadlines, quality and costs, News in Brief . .18 sometimes by wide margins. In addition to technical and technological know- how, interdisciplinary work methods and New Members . .20 target-oriented development manage- ment are increasingly becoming key skills. 40ff. Projects Parametric Requirements and Simulation Data Management in Mechatronic Development* . .22 Digital Factory PLM Based Framework for Set Based Concurrent Engineering* . .26 New Thinking to Escape the Crisis . .30 Transferring Engineering Data to Manufacturing . .34 Digital Factory Planning in Car Manufacturing . .37 Mechatronic Product Architecture – the Central Starting Point for Product Development* . .40 Planning tools are not yet as well inte- grated in the digital factory as they are, for example, in the design field. The Science & Research main reason for this is that there are as yet no standards for the description of Application-Specific Data Models in the digital factory .
    [Show full text]
  • 21 Miscellaneous Companies
    Chapter 21 Miscellaneous Companies Space restrictions simply do not permit me to go into the depth of detail I would like on every company that participated in the early days of the CAD industry nor cover numerous in-house systems developed at major automobile and aerospace companies. Readers will have to be satisfied with the brief descriptions included in this chapter and even then, I have only been able to cover what I consider to be the companies that had the biggest impact. There are hundreds if not thousands of companies that at one time marketed engineering design software. Some of the companies described in this chapter offered just software while other provided both hardware and software. While many have changed names, I have decided to list them alphabetically based upon the name they are best been known by along with earlier and subsequent name changes. Adra Systems (Matrix One) Adra Systems was founded in Lowell, Massachusetts in July 1983 by William Mason, who had been at Applicon from 1973 to 1983, most recently as vice president of operations, James Stenzel, who had been vice president of engineering at Hastech, Inc., and Peter Stoupas, who had earlier been a regional sales manager at Adage and had also worked for Applicon. Mason became the president and CEO, Stenzel the vice president of product development and Stoupas the vice president of marketing. Between 1983 and 1986, the company raised $11.6 million of venture funding from a number of firms including American Research & Development, the company that also provided the initial funding for Digital Equipment Corporation.
    [Show full text]
  • Designer and Manufacturer of Precision Ball Bearing Movement Solutions
    List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal Accuride International - Designer and Manufacturer of precision ball bearing movement solutions Slides for Electronic Enclosures / Rack Mounting 2807 - Electronic Enclosure, Low Profile Slide Model 2807 - 1U to 2U chassis, loads up to 100 lbs. (45 kg) per pair, 2" (51 mm) over travel, lock-out feature, latch disconnect, attached rear bracket provides up to 2" of adjustment. 2907 - Ball Bearing Electronic Enclosure Slide Model 2907 –1U to 4U chassis, loads up to 115 lbs. (52 kg) load capacity, 2" (51 mm) over travel, lock-out feature, lever disconnect, adjustable brackets included. 2907WB - Ball Bearing Electronic Enclosure Slide Model 2907WB –1U to 4U chassis, 120-lb. (55 kg) load capacity per pair, 2" (51 mm) over travel, lock-out feature, lever disconnect, brackets compatible with .63" (16 mm) and .50" (13 mm) pitch patterns and dual .63" (16 mm) patterns. 3507 - Heavy Duty, Ball Bearing Movement Model 3507 –4U to 8U chassis, loads up to 200 lbs. (91 kg) per pair, 2" (51 mm) over travel, lock-out feature, lever disconnect. Rack Mounting Accessories CC9 - Wide Cable Carrier, For Heavy-Duty Cable Installations Model CC9-1 – Use with round cable, extends to 23" (584 mm) when fully extended. For 2U and larger chassis. CC11 - Wide Cable Carrier, For Heavy-Duty Cable Installations Model CC11 – Wide are for ribbon cable, extends to 28.24" (717 mm) when fully extended Light Duty Slides 0363 - Two-Way Travel Slide Model 0363 – Two-way travel, full extension, loads up to 100 lbs.
    [Show full text]
  • Vlsi Cad Engineering Grace Gao, Principle Engineer, Rambus Inc
    VLSI CAD ENGINEERING GRACE GAO, PRINCIPLE ENGINEER, RAMBUS INC. AUGUST 5, 2017 Agenda • CAD (Computer-Aided Design) ◦ General CAD • CAD innovation over the years (Short Video) ◦ VLSI CAD (EDA) • EDA: Where Electronic Begins (Short Video) • Zoom Into a Microchip (Short Video) • Introduction to Electronic Design Automation ◦ Overview of VLSI Design Cycle ◦ VLSI Manufacturing • Intel: The Making of a Chip with 22nm/3D (Short Video) ◦ EDA Challenges and Future Trend • VLSI CAD Engineering ◦ EDA Vendors and Tools Development ◦ Foundry PDK and IP Reuse ◦ CAD Design Enablement ◦ CAD as Career • Q&A CAD (Computer-Aided Design) General CAD • Computer-aided design (CAD) is the use of computer systems (or workstations) to aid in the creation, modification, analysis, or optimization of a design CAD innovation over the years (Short Video) • https://www.youtube.com/watch?v=ZgQD95NhbXk CAD Tools • Commercial • Freeware and open source Autodesk AutoCAD CAD International RealCAD 123D Autodesk Inventor Bricsys BricsCAD LibreCAD Dassault CATIA Dassault SolidWorks FreeCAD Kubotek KeyCreator Siemens NX BRL-CAD Siemens Solid Edge PTC PTC Creo (formerly known as Pro/ENGINEER) OpenSCAD Trimble SketchUp AgiliCity Modelur NanoCAD TurboCAD IronCAD QCad MEDUSA • ProgeCAD CAD Kernels SpaceClaim PunchCAD Parasolid by Siemens Rhinoceros 3D ACIS by Spatial VariCAD VectorWorks ShapeManager by Autodesk Cobalt Gravotech Type3 Open CASCADE RoutCad RoutCad SketchUp C3D by C3D Labs VLSI CAD (EDA) • Very-large-scale integration (VLSI) is the process of creating an integrated circuit (IC) by combining hundreds of thousands of transistors into a single chip. • The design of VLSI circuits is a major challenge. Consequently, it is impossible to solely rely on manual design approaches.
    [Show full text]
  • Manage Engineering Data Complex Models and Simulations Yield a Torrent
    NX 8 for Design. Smarter decisions, better products. Learn more on page 11 DtopEng_banner_NXCAD_MAR2012.indd 1 3/8/12 11:02 AM April 2012 / deskeng.com Origin 8.6 Overview P.22 Direct Modeling and FEA P.24 TECHNOLOGY FOR DESIGN ENGINEERING Manage Engineering Data Complex models and simulations yield a torrent of data to seize and control. P.16 RACING AHEAD WITH CLUSTERS P.35 REVIEW: HP Z10 WORKSTATION P.38 P.40 PREPARING 3D MODELS de0412_Cover_Darlene.indd 1 3/15/12 12:20 PM Objet.indd 1 3/14/12 11:17 AM DTE_0412_Layout 1 2/28/12 4:36 PM Page 1 Data Loggers & Data Acquisition Systems iNET-400 Series Expandable Modular Data Acquisition System • Directly Connects to Thermocouple, RTD, Thermistor, Strain Gage, Load Complete Cell, Voltage, Current, Resistance Starter and Accelerometer Inputs System $ • USB 2.0 High Speed Data Acquisition 990 Hardware for Windows® ≥XP SP2, Vista or 7 (XP/VS/7) • Analog and Digital Input and Outputs • Free instruNet World Software Visit omega.com/inet-400_series © Kutt Niinepuu / Dreamstime.com Stand-Alone, High-Speed, 8-Channel High Speed Voltage Multifunction Data Loggers Input USB Data Acquisition Modules OM-USB-1208HS Series Starts at $499 High Performance Multi-Function I/O USB Data Acquisition Modules OMB-DAQ-2416 Series OM-LGR-5320 Series Starts at Starts at $1100 $1499 Visit omega.com/om-lgr-5320_series Visit omega.com/om-usb-1208hs_series Visit omega.com/omb-daq-2416 ® omega.com ® © COPYRIGHT 2012 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED Omega.indd 1 3/14/12 10:54 AM Degrees of Freedom by Jamie J.
    [Show full text]
  • Owens Community College
    Owens Community College CAD Technology Advisory Meeting Date: March 21, 2013 Location: Honey Diner, Walbridge, OH Industrial Attendees: Scott Chapman, John Colley, Linda Gulvas, Lorrie Hedges, Wes Linenkugel, Eric Messer, David Rizzo, Patricia Torkelson Students: Suanne Drees and Matt Leafgren Owens Attendees: Bill Antoszewski, Alan Bethea, Jacey Parks, Ralph Semrock, Duane Shaffer, Randy Wharton Topic Discussion/Rationale Recommendation/Decision/Action Call to Order and Review of . The meeting was called to order by Chairman Wes . Minutes were approved. Previous Minutes Linenkugel at 8:00 a.m. and introductions were made. Minutes can be found on the Owens website at . Minutes were distributed and reviewed. www.owens.edu under Academics, then the appropriate program. Enrollment and Retention Report . The College overall enrollment is down 1.1% when . The economy is rebounding which means enrollments compared to last spring. are lower due to students going back to work. The School of Technology (SoT) enrollment is down 4.8%. High School students have an opportunity for dual . The CAD program enrollment is up 57.1% from 70 declared enrollment. They are able to take and get credit for majors to 110. college courses at the high school. The CAD Certificate remained the same at 14 students. Faculty Report . This semester, Alan Bethea is teaching AutoCad, . Duane Shaffer would love to evolve the Industrial SolidWorks, and Advanced SolidWorks along with two CAD I and II classes into problem solving classes. It sections of QCT 105 Technology and Society. He has had would incorporate the things they have already learned by far the best students he has ever had this semester.
    [Show full text]
  • MODELIRANJE MAŠINSKIH ELEMENATA I KONSTRUKCIJA Dipl
    MODELIRANJE MAŠINSKIH ELEMENATA I KONSTRUKCIJA dipl. inž. Sima Pastor, Srednja mašinska škola, Novi Sad 1929. 1936. 2012. Srednja mašinska škola, Novi Sad, Srbija www.masinskans.edu.rs 01 MMEiK autorizoavano predavanje iz predmeta Modeliranje Mašinskih Elemenata i Konstrukcija Modeliranje mašinskih elemenata i konstrukcija Srednja mašinskaSrednja škola, mašinska Novi škola, Sad, Srbija Novi Sad, Srbija Pastor - 2012. strana 2 www.masinskans.edu.rswww.masinskans.edu.rs Sadržaj 3D Model Sistem razvoja proizvoda u CAD/CAE/CAM sistemima Modeliranje mašinskih elemenata i konstrukcija Srednja mašinska škola, Novi Sad, Srbija Pastor - 2012. strana 3 www.masinskans.edu.rs ..: Razvoj proizvoda ..: Tipično okruženje razvoja proizvoda ..: Varijabilnost i složenost ..: Sistem razvoja proizvoda - PDS ..: Digitalana reprezentacija proizvoda Part 1 SISTEM RAZVOJA PROIZVODA Modeliranje mašinskih elemenata i konstrukcija Srednja mašinskaSrednja škola, mašinska Novi škola, Sad, Srbija Novi Sad, Srbija Pastor - 2012. strana 4 www.masinskans.edu.rswww.masinskans.edu.rs Razvoj Proizvodnja i Operativnost i Planiranje Koncept Demonstracija sistema razvoj podrška Upravljanje resorom Upravljanje programom ment dž Uvod u novi proizvod Usklađivanje s propisima Mena Izmene i upravljanje konfiguracijama Predlog odgovora Sagledavanje zahteva i upravljanje Prodaja Publikacije marketinga proizvoda i marketing Razvoj koncepta Oblikovanje sistema Oblikovanje detalja Oblikovanje varijanti i izrada Inženjering Verifikacija i validnost Outsourcing dizajn Komponente i upravljanje
    [Show full text]
  • Kubotek3d Announces Keycreator 2019 Release
    Source: Kubotek3D September 10, 2018 09:00 ET Kubotek3D Announces KeyCreator 2019 Release MARLBOROUGH, Mass., Sept. 10, 2018 (GLOBE NEWSWIRE) -- Kubotek3D, developer of 3D mechanical Computer-aided design (CAD) software, today announced the latest major release of KeyCreator CAD/ CAM software. KeyCreator 2019 will provide significant improvements in graphics performance with large models, several productivity improvements, updates to translators, and the availability of new CAD translators. “KeyCreator 2019 was built to enhance overall performance and speed of graphics displays,” said Ram Eswaran, CTO of Kubotek3D. “We took an already strong product, and pushed the boundaries of technology to enable users to get their jobs done better and faster.” Accelerated Graphics KeyCreator 2019 includes a significant restructuring of the internal data architecture used in combination with the HOOPS engine component from Techsoft3D to render everything seen in the graphical viewport. The result is a dramatic 300% to 600% improvement in frame rate speeds for models with large numbers of faces, especially those using partial transparency. Productivity Improvements Quick re-use of model geometry has been improved by providing DynaHandles in the commonly used file import and cut/copy/paste functions. This allows intuitive in-process adjustment to the positioning, rotation, and scale using visual feedback without a multi-step process or needing to execute a separate edit function. The Bounding Box function which is used to create a block to surround selected objects, typically for modeling solid metal block, has been upgraded with automatic associative length, width, height dimension entities and also to support offset values to add material around the selected objects.
    [Show full text]
  • What's New Keycreator Pro 2021
    MfgCAD What's New KeyCreator Pro 2021 1 • Benefits 3 • Productivity 4 - 8 o Extensive Enhancements to Use Materials/RGB for Workflow o New Filter on Materials o Read STEP AP242 o New Auxiliary Projected View Capability o Dynamic Cutting Plane Sections From Part References • Performance 9 - 10 o Selection Control Table of Contents Table o DXF/DWG Last Export File Type Remembered o Feature Holes Remember Last “Key-In” Values o Detailing Style Editor Time to Reopen Dramatically Decreased • Interoperability 11 o Read & Write Compressed STEP Files (.STPZ) o IFC Assemblies import • Updated Translators 12 • UI 12 o Selectable Axis Indicators 2 Benefits The KeyCreator 2021 release productivity benefits were based on data collected from KeyCreator users focused on reusing CAD data and productivity without interrupting established workflows. Enhancements were made in Materials, RGB colors and Face Tools for Model Based Definition (MBD) workflows used by mold and tooling industries. The significant change is that the Materials/RGB are saved within the .CKD part file allowing the easier exchange of files and materials between coworkers. The import process now automatically populates the Materials list with materials/RGB colors used in the 3D imported model capturing manufacturing intent. These upgrades allow for new filtering by materials allowing users to select faces based on a material/RGB color. New import support for STEP AP242 continues addressing MBD and Product Manufacturing Information (PMI) used in the industry. KeyCreator 2021 productivity addresses the elimination of the extra steps in functions, dialogs, and Layouts. These include: • Remembers the last setting used for DXF/DXF export file type • Recalls last used Feature Holes “Key-In” values.
    [Show full text]