DOCSLIB.ORG

Designer and Manufacturer of Precision Ball Bearing Movement Solutions

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Designer and Manufacturer of Precision Ball Bearing Movement Solutions List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal Accuride International - Designer and Manufacturer of precision ball bearing movement solutions Slides for Electronic Enclosures / Rack Mounting 2807 - Electronic Enclosure, Low Profile Slide Model 2807 - 1U to 2U chassis, loads up to 100 lbs. (45 kg) per pair, 2" (51 mm) over travel, lock-out feature, latch disconnect, attached rear bracket provides up to 2" of adjustment. 2907 - Ball Bearing Electronic Enclosure Slide Model 2907 –1U to 4U chassis, loads up to 115 lbs. (52 kg) load capacity, 2" (51 mm) over travel, lock-out feature, lever disconnect, adjustable brackets included. 2907WB - Ball Bearing Electronic Enclosure Slide Model 2907WB –1U to 4U chassis, 120-lb. (55 kg) load capacity per pair, 2" (51 mm) over travel, lock-out feature, lever disconnect, brackets compatible with .63" (16 mm) and .50" (13 mm) pitch patterns and dual .63" (16 mm) patterns. 3507 - Heavy Duty, Ball Bearing Movement Model 3507 –4U to 8U chassis, loads up to 200 lbs. (91 kg) per pair, 2" (51 mm) over travel, lock-out feature, lever disconnect. Rack Mounting Accessories CC9 - Wide Cable Carrier, For Heavy-Duty Cable Installations Model CC9-1 – Use with round cable, extends to 23" (584 mm) when fully extended. For 2U and larger chassis. CC11 - Wide Cable Carrier, For Heavy-Duty Cable Installations Model CC11 – Wide are for ribbon cable, extends to 28.24" (717 mm) when fully extended Light Duty Slides 0363 - Two-Way Travel Slide Model 0363 – Two-way travel, full extension, loads up to 100 lbs. (45 kg) per pair, hold-in detent at center, non-disconnect, tested to 80,000 cycles. 201 - Low Profile, Light Duty Slide Model 201 – ¾ extension, low profile, loads up to 108 lbs. (49 kg) per pair, non-disconnect, hold-in detent. 2601 - Full Extension, Hold-In Detent Model 2601 – Full extension, low profile, loads up to 75 lbs. (34 kg) per pair, non-disconnect, hold-in detent. 3732 - Full Extension Drawer Slide Model 3732 – Full extension, loads up to 100 lbs. (45 kg) per pair, latch disconnect, hold-in detent. 3832C - Vertical Drawer Adjustment Cam http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks | VISI | VX … Page 1/5 List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal Model 3832C – Full extension, loads up to 100 lbs. (45 kg) per pair, lever disconnect, hold-in detent. 3832CDO - Detent In and Out Model 3832DO – Detent-Out holds pullout shelves or trays in an open position. Full extension, loads up to 100 lbs. (45 kg) per pair, lever disconnect, hold-in detent. 3832EC - Easy-Close Feature Model 3832EC – Easy-Close (EC) brings drawers to a smooth, gentle close. Full extension, loads up to 100 lbs. (45 kg) per pair, lever disconnect, hold-in detent. 3832HDSC - Heavy-Duty Self-Closing Model 3832HDSC – Heavy-Duty Self-Closing ensures drawers come to a complete close and stay closed. Full extension, loads up to 100 lbs. (45 kg) per pair, lever disconnect, hold-in detent. 3832CHDTR - Heavy-Duty Touch Release Model 3832HDTR – Heavy-Duty Touch Release holds drawers closed until drawer front is pressed to release. Drawers are propelled open about 2" (51 mm). Full extension, loads up to 100 lbs. (45 kg) per pair, lever disconnect, hold-in detent. 3832SC - Self Closing, Stay Closed Model 3832SC – Self-Closing ensures drawers come to a complete close and stay closed. Full extension, loads up to 100 lbs. (45 kg) per pair, lever disconnect, hold-in detent. 3832CTR - Touch Release Model 3832TR – Touch Release holds drawers closed until drawer front is pressed to release. Drawers are propelled open about 2"(51 mm). Full extension, loads up to 100 lbs. (45 kg) per pair, lever disconnect, hold-in detent. 3832CH - Vertical Drawer Adjustment Cam Model CH3832 – Weather resistant finish, full extension, loads up to 100 lbs. (45 kg) per pair, lever disconnect, hold-in detent. Medium Duty Slides 204A-LR - Lock-Out with Front Disconnect Model 204A-LR – ¾ extension, lock-out, loads up to 140 lbs. (64 kg) per pair, latch disconnect. 301-2590 - Undermount Shelf Slide Model 301-2590 – .83" (21 mm) over travel, loads up to 155 lbs. (70 kg), fixed brackets mount to top or bottom of cases, non-disconnect. 305A-LR - Lock-Out With Front Disconnect Model 305A-LR – .88" (22.3 mm) over travel, lock-out, loads up to 140 lbs. (64 kg) per pair, latch disconnect, special brackets permit mounting behind vertical rails of enclosures. 3301 - Medium Duty, Over Travel, Rack Mounted Slide Model 3301 – 1" (25.4 mm) over travel, loads up to 150 lbs. (68 kg) per pair, non-disconnect. http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks | VISI | VX … Page 2/5 List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal 3307 - Medium Duty Slide, Over Travel, Front Disconnect Model 3307 – 1" (25.4 mm) over travel, lock-out feature, loads up to 150 lbs. (68 kg) per pair, latch disconnect. 3308 - Medium Duty, Lever Disconnect, Over Travel Model 3308 – 1" (25.4 mm) over travel, lock-in and lock-out features, loads up to 150 lbs. (68 kg) per pair, lever disconnect. 3357 - Medium Duty Slide, Over Travel, Front Disconnect Model 3357 – 1" (25.4 mm) over travel, loads up to 150 lbs. (68 kg) per pair, latch disconnect. Heavy Duty Slides 301 - Low Profile, Over Travel, Medium Duty, Non-Disconnect Model 301 – .88" (22.3 mm) over travel, low profile, loads up to 175 lbs. (80 kg) per pair, non-disconnect, optional enclosure mounting brackets available. 3600 - Heavy Duty Slide, Full Extension Model 3600 – Full extension, loads up to 273 lbs. [124 kg] per pair, non-disconnect, hold-in detent. 3601 - Three Member, Over Travel, Heavy Duty Slide Model 3601 – 1" (25.4 mm) over travel, loads up to 255 lbs. (116 kg) per pair, non-disconnect, optional enclosure mounting brackets available. 3607 - Heavy-Duty Slides, Full Extension Model 3607 – Full extension, lock-out, loads up to 273 lbs. [124 kg] per pair, lever disconnect, optional enclosure mounting brackets available. 3641 - Interlock Slide, Rod-Based Interlock System Model 3641 – 1" (25.4 mm) over travel, interlock feature allows only one drawer to open at a time, loads up to 180 lbs. (82 kg) per pair, rail and pocket mount/disconnect system. 3642 - Companion Slide to 3641 Model 3642 - Companion Slide to Model 3641 3657 - Heavy-Duty Slides, Full Extension Model 3657 – Full Extension, loads up to 273 lbs. [124 kg] per pair, lever disconnect. 7950 - Heavy-duty slide series Model 7950 – Full extension, dual mounting capability, side mount load capacity up to 350 lbs. (159 kg) per pair, flat mount load capacity up to 150 lbs. (68 kg) per pair, non- disconnect, bridged ball retainer prevents retainer migration. 7957 - Heavy-duty slide series Model 7957 – Full extension, dual mounting capability, side mount load capacity up to 350 lbs. (159 kg) per pair, flat mount load capacity up to 150 lbs. (68 kg) per pair, lever disconnect, bridged ball retainer prevents retainer migration. http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks | VISI | VX … Page 3/5 List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal 9301 - Extra Heavy Duty, Full Extension Drawer Slide Model 9301 – Full extension, loads up to 500 lbs. [227 kg.] per pair, non-disconnect, optional platform mounting bracket kits available. Load rating varies based on application. See technical sheet for details. 9301 Bracket Kit - Accessory for 9301 Model 9307 – Full extension, lock-out feature with front lever, loads up to 500 lbs. [227 kg.] per pair, non-disconnect, optional platform mounting bracket kits available. Load rating varies based on application. See technical sheet for details. 9308 - Lock-In/Lock-Out, Extra Heavy-Duty, Full Extension Model 9308 – Full extension, lock-in and lock-out feature with front lever, loads up to 500 lbs.[227 kg.] per pair, non-disconnect, optional platform mounting bracket kits available.Load rating varies based on application. See technical sheet for details AL4120 - Aluminum, 3/4 Extension Model AL4120 – ¾ extension, lightweight aluminum, corrosion resistant, loads up to 1,212 lbs. (550 kg) per pair. AL4140 - Aluminum, Full Extension Model AL4140 – Full extension, lightweight aluminum, corrosion resistant, loads up to 1,323 lbs. (600 kg) per pair. Specialty Slide Products 115 - Linear Motion Slide Model 115 – Linear-motion slide with captive travel; flat, side, or vertical mount; up to 132 lbs. (60 kg) per pair, non-disconnect. 115RC - Linear Motion Track System, Aluminum Track Model 115RC – Linear motion track system comprised of aluminum track and re-circulating ball carriages; loads up to 265 lbs. (120 kg); load rating based on mounting configuration and number of ball carriages inserted into track.
Load more

Recommended publications
  • Mitcalc Brochure
    MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge. MITCalc contains both design and check calculations of many common tasks, such as: tooth, belt, and chain gear, beam, shaft, springs, bolt connection, shaft connection and many others. There are also many material, comparison, and decision tables, including a system for the administration of resolved tasks. The calculations support both Imperial and Metric units and are processed according to ANSI, ISO, DIN, BS, CSN and Japanese standards. It is an open system designed in Microsoft Excel which allows not only easy user-defined modifications and user extensions without any programming skills, but also mutual interconnection of the calculations, which is unique in the development of tailor-made complex calculations. The sophisticated interaction with many 2D (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D (Autodesk Inventor, SolidWorks, Solidedge) CAD systems allows the relevant drawing to be developed or 3D models to be inserted in a few seconds. OEM licensing of selected calculations or the complete product is available as well. MITCalc installation packages are available at www.mitcalc.com and after installation customer have 30 days to freely test the product. CAD support 2D CAD systems: Most of the calculations allow direct output to major 2D CAD systems. Just choose your CAD system in the calculation and select the desired view (a projection type).
    [Show full text]
  • Make Measurement Matter 12 March 2020
    94 A-Z OF MEMBERS AND PROFILES 241 MAKE MEASUREMENT MATTER 12 MARCH 2020 The GTMA has teamed up with the successful Engineering Materials Live and FAST LIVE exhibitions, to deliver ‘Make Measurement Matter’ • QUALITY VISITORS • UNIQUE FORMAT • LOW COST Current attendees of the FAST LIVE and Engineering Materials Live events, compliment the Make Measurement Matter content, with visitors involved in production, design engineering, manufacturing, measurement, testing, quality and inspection. ATED WITH CO-LOC ATED WITH CO-LOC ATED WITH CO-LOC H 2020 12 MARC H 2020 0121 392 8994 12 [email protected] www.gtma.co.uk www.gtma.co.uk SUPPLIERSH DIREC 2020T ORY 12 MARC A-Z OF MEMBERS AND PROFILES 95 A-Z of members and members’ profiles INCLUDING: SECTORS AND MARKET SERVED BY INDIVIDUAL COMPANIES Find the right company for the right product and service. For up-to-date information please also see: www.gtma.co.uk 96 A-Z OF MEMBERS AND PROFILES 241 3D LASERTEC LTD Mansfield i-centre T 01623 600 627 Oakham Business Park W www.3dlasertec.co.uk Hamilton Way, Mansfield Nottinghamshire NG18 5BR Managing Director & Sales Contact: Wayne Kilford Sales Contact: Patrick Harrison Our customer base now extends through To see the laser machinery in operation Injection, blow, extrusion and rotational or to satisfy your queries related to laser moulds, pharmaceutical, Aerospace and engraving any special materials or indeed medical industry, gun manufacturers, general discussion relating to your project printing, ceramic plus other general and then call for an appointment. obscure requests. 3D Lasertec Ltd are privately owned and The need for laser engraving on projects established in February 1999.
    [Show full text]
  • CAD/CAM Selection for Small Manufacturing Companies
    CAD/CAM SELECTION FOR SMALL MANUFACTURING COMPANIES By Tim Mercer A Research Paper Submitted in Partial Fulfillment of the Requirements for the Master of Science Degree in Management Technology Approved for Completion of 3 Semester Credits INMGT 735 Research Advisor The Graduate College University of Wisconsin May 2000 The Graduate School University of Wisconsin - Stout Menomonie, WI 54751 Abstract Mercer Timothy B. CAD/CAM Selection for Small Manufacturing Companies Master of Science in Management Technology Linards Stradins 2/2000 71 pages Publication Manual of the American Psychological Association In today's fast paced world, CAD/CAM systems have become an essential element in manufacturing companies throughout the world. Technology and communication are changing rapidly, driving business methods for organizations and requiring capitalization in order to maintain competitiveness. Knowledge prior to investing into a system is crucial in order to maximize the benefits received from changing CAD/CAM systems. The purpose of this study is to create a methodology to aid small manufacturing companies in selecting a CAD/CAM system. The objectives are to collect data on CAD/CAM systems that are available in the market today, identify important criteria in system selection, and identify company evaluation parameters. Acknowledgements Thanks to Dr. Rich Rothaupt for introducing me to CAM, survey help, and providing guidance with CAD/CAM applications. Thanks to Dr. Martha Wilson for early revisions, survey help and overall guidance. Thanks to my good friend and soon to be Dr. Linards Stradins for his patience, leadership, and wisdom. His invaluable knowledge and dedication as my advisor has helped me both personally and academically.
    [Show full text]
  • Which Turbocad Version Is Right for You?
    TurboCAD Pro Platinum 2016 TurboCAD Designer 2016 TurboCAD LTE Pro v9 TurboCAD Deluxe 2016 TurboCAD Pro 2016 TurboCAD LTE v9 Which TurboCAD Version is Right for You? Suggested Retail Price $1,695 $1,495 $299.99 $149.99 $129.99 $49.99 PRODUCT POSITIONING 2D/3D Drafting with Solid and Surface Modeling a a 2D/3D with Surface Modeling a 2D Drafting with Default AutoCAD-like Interface a a 2D Drafting a USABILITY & INTERFACE 32-bit and 64-bit bit versions a a a a a a Command Line a a a a Design Director - for object property management a a a a Draw Order by Layer a a a a a a Dynamic Input Cursor a a a a Easy, Handle-Based Editing a a a a a a Conceptual Selector a a a a a Fully Customizable User Interface and Preferences a a a a a a ePack a a a a Explode Viewports a a Explorer Palette - Complete control over applicationa and Drawing organization and a a a a standards Geolocation of drawings, Compase Rose a a a a a Image Manager a a a Intelligent Cursor - data entry points and feedback visible next to cursor a a a a Layer Filters a a a a a Layer Management a a a a a a Measurement Tools a a a a a a Object SNAP Prioritization a a a a a a Protractor Tool a a a a Flexible UI a a a a Redsdk engine for enhanced drawing performance in wireframe, hidden line and a a a a conceptual rendering viewing TurboCAD Pro Platinum 2016 TurboCAD Designer 2016 TurboCAD LTE Pro v9 TurboCAD Deluxe 2016 TurboCAD Pro 2016 TurboCAD LTE v9 Which TurboCAD Version is Right for You? Transparent and Bit-mapped Fills a a a a True Units Retained between Drawings with Different
    [Show full text]
  • Date Created Size MB . تماس بگیر ید 09353344788
    Name Software ( Search List Ctrl+F ) Date created Size MB برای سفارش هر یک از نرم افزارها با شماره 09123125449 - 09353344788 تماس بگ ریید . \1\ Simulia Abaqus 6.6.3 2013-06-10 435.07 Files: 1 Size: 456,200,192 Bytes (435.07 MB) \2\ Simulia Abaqus 6.7 EF 2013-06-10 1451.76 Files: 1 Size: 1,522,278,400 Bytes (1451.76 MB) \3\ Simulia Abaqus 6.7.1 2013-06-10 584.92 Files: 1 Size: 613,330,944 Bytes (584.92 MB) \4\ Simulia Abaqus 6.8.1 2013-06-10 3732.38 Files: 1 Size: 3,913,689,088 Bytes (3732.38 MB) \5\ Simulia Abaqus 6.9 EF1 2017-09-28 3411.59 Files: 1 Size: 3,577,307,136 Bytes (3411.59 MB) \6\ Simulia Abaqus 6.9 2013-06-10 2462.25 Simulia Abaqus Doc 6.9 2013-06-10 1853.34 Files: 2 Size: 4,525,230,080 Bytes (4315.60 MB) \7\ Simulia Abaqus 6.9.3 DVD 1 2013-06-11 2463.45 Simulia Abaqus 6.9.3 DVD 2 2013-06-11 1852.51 Files: 2 Size: 4,525,611,008 Bytes (4315.96 MB) \8\ Simulia Abaqus 6.10.1 With Documation 2017-09-28 3310.64 Files: 1 Size: 3,471,454,208 Bytes (3310.64 MB) \9\ Simulia Abaqus 6.10.1.5 2013-06-13 2197.95 Files: 1 Size: 2,304,712,704 Bytes (2197.95 MB) \10\ Simulia Abaqus 6.11 32BIT 2013-06-18 1162.57 Files: 1 Size: 1,219,045,376 Bytes (1162.57 MB) \11\ Simulia Abaqus 6.11 For CATIA V5-6R2012 2013-06-09 759.02 Files: 1 Size: 795,893,760 Bytes (759.02 MB) \12\ Simulia Abaqus 6.11.1 PR3 32-64BIT 2013-06-10 3514.38 Files: 1 Size: 3,685,099,520 Bytes (3514.38 MB) \13\ Simulia Abaqus 6.11.3 2013-06-09 3529.41 Files: 1 Size: 3,700,856,832 Bytes (3529.41 MB) \14\ Simulia Abaqus 6.12.1 2013-06-10 3166.30 Files: 1 Size: 3,320,102,912 Bytes
    [Show full text]
  • 3D Direct Modeling Software
    3D Direct Modeling Software MASTER YOUR GEOMETRY 1 Benefits 3 Animation 3 Rack & Pinion Constraint 3 Universal Joint Constraint 3 Point on curve constraint 4 Intermittent Motor Dialog 4 CAD Comparison 5 Photorealistic Rendering 6 File Open/Load Performance 6 Table of Contents Table Sheet Metal Flange 6 Interoperability 7 ACIS SAT/SAB R25 7 Inventor Version 2015 7 AutoCAD DWG/DXF 2015 7 CATIA V5 R24 7 Other Features and Improvements 7 3D Direct Modeling Software MASTER YOUR GEOMETRY 2 Benefits KeyCreator 2015 continues to add functionality and customer-driven enhancements to give its users unmatched productivity and flexibility for an efficient design-to-manufacture process. As the only remaining independent Direct CAD solution available, KeyCreator extends its use of Direct Modeling technology by now including KeyCreator Compare CAD Comparison tool as a standard feature. KeyCreator 2015 also includes many updates to file reading capabilities to support the latest file versions from major CAD vendors. Animation Enhanced Animation capabilities include: • Rack & Pinion Constraint • Universal Joint Constraint • Point on Curve Constraint • Intermittent Motor Dialog Users can now Export a Movie File of their animation replay for easier sharing. Several new and updated tutorial videos are also available on Kubotek University. Rack and Pinion Constraint example Universal Joint Constraint example 3D Direct Modeling Software MASTER YOUR GEOMETRY 3 Point on Curve Constraint example Intermittent Motor Dialog example 3D Direct Modeling Software MASTER YOUR GEOMETRY 4 CAD Comparison KeyCreator Compare has been enhanced and is now a standard tool found in KeyCreator 2015, making KeyCreator the first and only CAD system that can import, edit and compare dozens of native CAD files produced from other systems.
    [Show full text]
  • Metadefender Core V4.12.2
    MetaDefender Core v4.12.2 © 2018 OPSWAT, Inc. All rights reserved. OPSWAT®, MetadefenderTM and the OPSWAT logo are trademarks of OPSWAT, Inc. All other trademarks, trade names, service marks, service names, and images mentioned and/or used herein belong to their respective owners. Table of Contents About This Guide 13 Key Features of Metadefender Core 14 1. Quick Start with Metadefender Core 15 1.1. Installation 15 Operating system invariant initial steps 15 Basic setup 16 1.1.1. Configuration wizard 16 1.2. License Activation 21 1.3. Scan Files with Metadefender Core 21 2. Installing or Upgrading Metadefender Core 22 2.1. Recommended System Requirements 22 System Requirements For Server 22 Browser Requirements for the Metadefender Core Management Console 24 2.2. Installing Metadefender 25 Installation 25 Installation notes 25 2.2.1. Installing Metadefender Core using command line 26 2.2.2. Installing Metadefender Core using the Install Wizard 27 2.3. Upgrading MetaDefender Core 27 Upgrading from MetaDefender Core 3.x 27 Upgrading from MetaDefender Core 4.x 28 2.4. Metadefender Core Licensing 28 2.4.1. Activating Metadefender Licenses 28 2.4.2. Checking Your Metadefender Core License 35 2.5. Performance and Load Estimation 36 What to know before reading the results: Some factors that affect performance 36 How test results are calculated 37 Test Reports 37 Performance Report - Multi-Scanning On Linux 37 Performance Report - Multi-Scanning On Windows 41 2.6. Special installation options 46 Use RAMDISK for the tempdirectory 46 3. Configuring Metadefender Core 50 3.1. Management Console 50 3.2.
    [Show full text]
  • Systémy Cad a Jejich Srovnání S Ohledem Na Výuku Technické Grafiky Na Základní Škole
    MASARYKOVA UNIVERZITA V BRNĚ PEDAGOGICKÁ FAKULTA KATEDRA TECHNICKÉ A INFORMAČNÍ VÝCHOVY SYSTÉMY CAD A JEJICH SROVNÁNÍ S OHLEDEM NA VÝUKU TECHNICKÉ GRAFIKY NA ZÁKLADNÍ ŠKOLE BAKALÁŘSKÁ PRÁCE Havlíčkův Brod 2013 VEDOUCÍ PRÁCE: Ing. Zdeněk Hodis, Ph.D AUTOR PRÁCE: Adam Dolejš strana | ii Abstrakt Tato bakalářská práce by měla čtenáře seznámit se softwarem typu CAD a převážně jeho využitím ve školství. V práci bude ukázáno několik typů komerčních i freewarových programů, popsáno jak s nimi pracovat a jaké jsou mezi nimi rozdíly. V textu budou rozebrány funkce, užití, styl zobrazení, přehlednost panelů či vzhled pracovní plochy. V přílohách práce budou poté představeny vybrané CAD programy, včetně ukázek práce s nimi. Klíčová slova Konstruování, technické kreslení, CAD, AutoCAD, ProgeCAD, 2D CAD, technický výkres, licence, porovnání strana | iii Abstract This thesis should familiarise the readers with the CAD software and highlight its significance in the educational. The thesis will introduce and compare several types of CAD software, both commercial and freeware. These will be described with regard to their features, use, visual style, user-friendliness, and workspace layout. In addition, by the means of practical demonstrations, the readers will be given an opportunity to become acquainted with a specific CAD program. Key words Design, technical drawing, CAD, AutoCAD, ProgeCAD, 2D CAD, license, comparison strana | iv Prohlášení Prohlašuji, že jsem bakalářskou práci vypracoval samostatně, a to pouze za použití citovaných pramenů, dalších informací a zdrojů v souladu s Disciplinárním řádem pro studenty Pedagogické fakulty Masarykovy univerzity a se zákonem č. 121/2000 Sb., o právu autorském, o právech souvisejících s právem autorským a o změně některých zákonů (autorský zákon), ve znění pozdějších předpisů.
    [Show full text]
  • Application of Computer Aided Design (CADD) in Data Display and Integration of Numerical and Field Results — Stripa Phase 3
    PROJECT m-04 Application of Computer Aided Design (CADD) in Data Display and Integration of Numerical and Field Results — Stripa Phase 3 DE. Press SM. Halliday J.E. Gale Fracflow Consultants Inc. St.John's, Nfld., Canada December 1990 TECHNICAL REPORT An OECD/NEA International project managed by: SWEDISH NUCLEAR FUEL AND WASTE MANAGEMENT CO Division of Research and Development Mailing address: Box 5864, S-102 48 Stockholm. Telephone: 08-665 28 00 APPLICATION OF COMPUTER AIDED DESIGN (CADD) IN DATA DISPLAY AND INTEGRATION OF NUMERICAL AND FIELD RESULTS - STRIPA - PHASE III D. E. Press S. M. Halliday J.E. Gale Fracflow Consultants Inc. St. John's, Nfld., Canada December 1990 This report concerns a study which was conducted for the Stripa Project. The conclusions and viewpoints presented in the report are those of the authors and do not necessarily coincide with those of the client. A list of other reports published in this series is attached at the end of the report. Information on previous reports are available through SKB. 11 Abstract Existing CAD/CADD systems have been reviewed and the micro-computer compatible solids modelling CADD software SilverScreen was selected for use in constructing a CADD model of the Stripa site. Maps of the Stripa mine drifts, shafts, raises and stopes were digitized and used to create three- dimensional images of the north-eastern part of the mine and the SCV site. In addition, the use of CADD sub-programs to display variation in fracture geometry and hydraulic heads have been demonstrated. The database developed in this study is available as either raw digitized files, processed data files, SilverScreen script files or in DXF or IGES formats; all of which are described in this report.
    [Show full text]
  • Download the PLM Industry Summary (PDF)
    PLM Industry Summary Christine Bennett, Editor Vol. 14 No 5 Friday 3 February 2012 Contents Acquisitions _______________________________________________________________________ 2 IBM Advances Mobile Capabilities with Acquisition of Worklight ________________________________2 Company News _____________________________________________________________________ 4 Autodesk Manufacturing Community Invited to Vote for 2011 Inventor of the Year ___________________4 Call for Entries: Autodesk Technology Makeover Contest for Small Businesses ______________________6 GRAPHISOFT Breaks Down BIM Transition So You Can “Get There Faster” _______________________7 Intergraph® Releases Video Overview of Its New CADWorx® DraftPro™ Intelligent 2D Plant Design Solution _______________________________________________________________________________7 IronCAD Signs Simulika Solutions & Consulting as New Reseller ________________________________8 Lectra Announces Significant New Investments in India _________________________________________9 Magnus Walldén Joins Tacton Systems as VP Professional Services ______________________________10 PRION GmbH is Now a Global Services Partner of Siemens PLM Software ________________________11 Russian High-Tech Engineering Company CompMechLab® Ltd. and Swiss company KISSsoft AG signed Software Distribution Agreement __________________________________________________________12 Savoy Computing Services Ltd Named an Autodesk Industry Partner _____________________________13 Events News ______________________________________________________________________
    [Show full text]
  • Cadalyst Labs Evaluates Five Professional Options
    REVIEWS COLUMNS AutoCAD 2013 • NEC MultiSync EA243WM 24” LCD Monitor Circles and Lines: Hidden Time-Savers in AutoCAD 2013 CadTempo 5.2: Automatically Track and Chart Work Time CAD Manager: Your Job Is to Manage Processes, Not Tools Autodesk Inventor Professional 2013 • BIMlist 2012 for Revit User Profile: Uriel Castillo — CAD Technician on a Mission Summer 2012 | Vol. 29 No. 3 | $9.99 Get Productive with CAD and Get the Job Done. www.cadalyst.com $ 500CAD Cadalyst Labs Evaluates Five Professional Options ENJOY THIS FREE COPY OF CADALYST... compliments of: www.intel.com www.dell.com Tech Trends CAD Use Takes Off Around the Globe The fastest route from vision to reality. Powerfully execute your ideas with Dell Precision™ Workstations. Get the hardware performance you need to maximize the CAD and BIM (Building Information Modeling) processes with ISV-certified Dell Precision Workstations. Experience the power of Intel® Core™ Processors or Intel® Xeon® processors along with optimal 3D image quality from NVIDIA® and ATI professional graphics. With up to 1.5TB* of storage on mobile systems and easy memory upgrades with the new tool-less chassis design on tower workstations, there’s Dell Precision Workstations Get uncompromised performance plenty of room to grow. Plus, exclusive Reliable Memory for your specialized applications. Technology on fixed workstations means less downtime. Find your ideal workstation configuration at www.dell.com/smb/workstations. *GB means 1 billion bytes and TB equals 1 trillion bytes; actual capacity varies with preloaded material and operating environment and will be less. TRADEMARK/COPYRIGHT NOTICES: Ultrabook, Celeron, Celeron Inside, Core Inside, Intel, Intel Logo, Intel Atom, Intel Atom Inside, Intel Core, Intel Inside, Intel Inside Logo, Intel vPro, Itanium, Itanium Inside, Pentium, Pentium Inside, vPro Inside, Xeon, and Xeon Inside are trademarks of Intel Corporation in the U.S.
    [Show full text]
  • CAD Data Exchange
    CCAADD DDaattaa EExxcchhaannggee 2255..335533 LLeeccttuurree SSeerriieess PPrrooff.. GGaarryy WWaanngg Department of Mechanical and Manufacturing Engineering The University of Manitoba 1 BBaacckkggrroouunndd Fundamental incompatibilities among entity representations Complexity of CAD/CAM systems CAD interoperability issues and problems cost automotive companies a combined $1 billion per year (Brunnermeier & Martin, 1999). 2 BBaacckkggrroouunndd (cont’d) Intra-company CAD interoperability Concurrent engineering and lean manufacturing philosophies focus on the reduction of manufacturing costs through the outsourcing of components (National Research Council, 2000). 3 IInnffoorrmmaattiioonn ttoo bbee EExxcchhaannggeedd Shape data: both geometric and topological information Non-shape data: graphics data Design data: mass property and finite element mesh data Manufacturing data: NC tool paths, tolerancing, process planning, tool design, and bill of materials (BOM). 4 IInntteerrooppeerraabbiilliittyy MMeetthhooddss Standardized CAD package Standardized Modeling Kernel Point-to-Point Translation: e.g. a Pro/ENGINEER model to a CATIA model. Neutral CAD Format: e.g. IGES (Shape-Based Format ) and STEP (Product Data-Based Format) Object-Linking Technology: Use Windows Object Linking and Embedding (OLE) technology to share model data 5 IInntteerrooppeerraabbiilliittyy MMeetthhooddss (Ibrahim Zeid, 1990) 6 CCAADD MMooddeelliinngg KKeerrnneellss Company/Application ACIS Parasolid Proprietary Autodesk/AutoCAD X CADKey Corp/CADKEY X Dassault Systems/CATIA v5 X IMS/TurboCAD X Parametric Technology Corp. / X Pro/ENGINEER SDRC / I-DEAS X SolidWorks Corp. / SolidWorks X Think3 / Thinkdesign X UGS / Unigraphics X Unigraphics / Solid Edge X Visionary Design System / IronCAD X X (Dr. David Kelly 2003) 7 CCAADD MMooddeelliinngg KKeerrnneellss (cond’t) Parent Subsidiary Modeling Product Company Kernel Parametric Granite v2 (B- Pro/ENGINEER Technology rep based) Corporation (PTC) (www.ptc.com) Dassault Proprietary CATIA v5 Systems SolidWorks Corp.
    [Show full text]