ISO9001 ISO14001 OHSAS18001
CAUTION: The product images/pictures in this product catalog are conceptual renderings that do not fully reflect actual colors and detailed parts. Therefore, this catalog cannot be used as a basis for a contract or negotiations.
ZEXIA1503-05 PRODUCT CONCEPT
Global Fujitec, Creating and Leading the New Standard for Elevators.
Delivering safe and reliable elevators to the world. Trusted For our new global standard elevator, Fujitec has standardized elevator main components, such as traction machine, control system and aesthetic fixtures, by people all over the world. as Global Common Components. Thus establishing the Fujitec brand identity and creating an integrated global quality management system and product reliability for our global supply chain.
1 2 DYNAMICS INTELLIGENCE HUMANITY
The permanent magnet synchronous gearless traction machine designed by Fujitec realizes the best balance between dynamic performance and reliability. Fujitec accumulated its know-how expertise throughout the design to production process. Our products meet various space-saving layout requirements.
Fujitec’s fully self-manufactured control system, ranging from control-circuit to inverter, establishes a highly reliable elevator performance. At anytime, we can provide prompt support that will improve operating efficiency.
A new universal design provides higher visibility, usability and passenger comfort. Simple but elegant, our new design offers congenial space for all passengers.
3 4 DYNAMICS INTELLIGENCE
Green Enhanced Permanent Magnet Gearless Traction Machine Safety The new Permanent Magnet (PM) synchronous gearless drive By upgrading various elevator system does not require a speed-reducing mechanism which safety mechanisms, safety is eliminates the use of polluting lubricating oil in a conventional further enhanced. gear box. Thereby establishing a new age of elevators for green functionality and eco-friendliness. The design philosophy of the Fujitec Group is fully applied Noise in the machine room is substantially reduced because no in order to ensure passenger noise is generated by the gear when the motor is running at high safety to the highest extent. speeds.
Car Door Opening Protection Device Small Machine Room = Space Saving This safety device prevents the car Compared with conventional machine room elevators, our door from opening in a non-locking small machine room requires 60% less area. area, which protects passengers from falling into the hoistway. A substantial area reduction of 60% Reliable Driving System Design
Impact Resistant UCMP (Unintended Landing Door System Car Movement Power Conventional Machine 827kWh/month PM Gearless Machine 646kWh/month 22% The landing doors are further Protection System) Motor Capacity Conventional Machine 9.0kW strengthened to be more impact The Unintended Car Movement PM Gearless Machine 8.5kW resistant, which effectively protects Protection System (UCMP) passengers from falling into the can immobilize the car when Data for Monthly※ Electrical Usage hoistway in the event of an accidental 600 Operations Per Day the elevator landing and car ※One month shall be 30 days. impact with the landing doors. doors are opened but the car Travel Distance: 30meters Rated Speed: 1.0mps Rated Load: 1200kg is not aligned correctly with the Ultra-Slim landing floor. This protects Depending on actual conditions, application and calculation results will vary. against personal injury and Permanent Magnet Gearless Door Operator equipment damage.
Fujitec's new ultra-slim PM door operator employs Distributed Control System COP: Control Panel Fujitec's highly-developed transmission mechanism COB: Car Operating Board which uses a PM motor as the driving device. Serial communication is adopted between the control panel (32-bit), hall-call IN: Hall Indicator Compared with conventional motor driving door buttons, floor indicators and hall lanterns. MIC: Microcomputer operators, around 35% reduction in energy usage is Depending on content and quantity of data, multiple protocol is respectively achieved. used, which achieves high-speed and large-scale data communications at With multiple security settings, the adoption of a 10 times the rate when compared to conventional systems. As a result, the terminal holding device provides more stable, smooth capability of monitoring elevator running status and instructions, with respect to opening and closing actions, ensuring safe elevator communication speed, precision, reliability, has been greatly enhanced. operation. In addition, the ultra-slim design saves hoistway space. The “BUS LINE mode”, advanced in the industry, is employed for communication, with strong anti-interference capabilities and multiple system expansion options.
Energy usage reduced by around than the conventional.
35% Instructions for conventional elevators are transmitted from the control panel in the machine room to respective devices through the traveling cable. Fujitec's "distributed control system" will exert the advantage of its security much better, the respective functions will be implemented strictly through the correct command received, so the elevator will obtain the absolute security.
5 6 HUMANITY
Intelligent·Clean
Human VONIC Automatic Voice Announcement System (Optional) The automatic voice announcement system is used for broadcasting elevator Engineering direction, arrival floor, door actions, emergency instructions and other information.
The new Fujitec's global standard IONFUL PlasmaclusterTM Ion Generating System design is applied for button and font. TM This is human engineering, a Fujitec embraces the Plasmacluster combination of better visibility technology of Sharp Corporation, Ventilation Unit and improved human-machine and takes the lead in utilizing the Plasmacluster New Standard Font Former Standard Font TM Ion Generating Device interface. Plasmacluster Ion Generating System (IONFUL) in the elevator Ventilation Opening 23569 23569 industry. It is highly effective in eliminating airborne mold, germs, bacteria, allergens, and bad odors.
Ventilation System
Fan
Plasmacluster Plasmacluster The new button design TM Plasmacluster is a trademark of Sharp Corporation Ion Generating Device has a more distinct font than in previous Plasmacluster Ion generations, which is more recognizable in various lighting conditions and viewing Safety·Green positions. This unique design further improves Intelligent Multi-Beam Self-Diagnostic Night Operation LED Ceiling Lights (Optional) the human-machine The intelligent multi-beam system The self-diagnostic operation is LED energy-saving ceiling lights interface. is able to effectively detect humans, the most characteristic feature of were adopted early in the industry, so pets, and objects to ensure passenger Fujitec products. Every night, the as to realize green functionality and A high contrast green safety when entering or leaving the elevator self-diagnostic operation environmental protection. color is applied to the elevator. The protection system automatically starts to inspect door open button, so as to greatly reduce human- is designed to project an infrared elevator operation and braking error in pressing the ray-light curtain covering the whole system at each floor to ensure incorrect button. door opening height at the elevator passenger safety. entrance, and if any light beam is Filament Equal LED Lamp Conditions interrupted, the closing door will stop Approx. Approx. Approx. Life 1,500h 13 times 20,000h closing and re-open automatically. Wattage 90W Approx. 1/10 9W
The emergency call button is located about 900mm from floor level allowing children and disabled persons to use in case of emergency.
7 8 Standard Car Design Standard Car Design Standard Car Design
Stylish Design, Stylish Life ZE-S2 ZE-S4 Our elevator cabin is reborn with a new design concept, the "Accent Stripe." This Ceiling Floor Ceiling Floor vertical running stripe divides the interior car CE-g2 BD-b1 CE-g2 BD-b1 panels to create a sharp contrast and stylish Painted Steel Sheet （TE-a7） Painted Steel Sheet （TE-a7） atmosphere in the cabin. Sill Sill Wall & Transom Stainless Steel Wall & Transom Stainless Steel CR-b1 CR-c1 Fan Fan Painted Steel Sheet （TE-a7） Painted Steel Sheet （TE-a7） Cross-flow Fan & IONFUL Cross-flow Fan & IONFUL Accent Stripe in left, right and rear Accent Stripe in Left, Right and Rear car panels Car Internal Height Car Panel Car Internal Height ZE-S1 Painted Steel Sheet（TE-a9） 2350mm ZE-S3 Stainless Steel with Mirror Finish 2350mm ZE-S5\S6\S7 Door Car Panel Height Door Car Panel Height Ceiling Painted Steel Sheet （TE-a7） 2350mm Ceiling Floor Painted Steel Sheet （TE-a7） 2350mm Ceiling Door CE-g2 CE-g2 BD-b3 CE-g2 Painted Steel Sheet Painted Steel Sheet （TE-b2） Painted Steel Sheet （TE-b1） Painted Steel Sheet （TE-a7\ TE-b1\ TE-b2） Sill （TE-a7\ TE-b1\ TE-b2） Floor Wall & Transom Wall & Transom Stainless Steel BD-b6\ BD-b4\ BD-b5 CR-b3 CR-b2 Sill Painted Steel Sheet （TE-b2） Fan Wall & Transom Painted Steel Sheet （TE-b1） Stainless Steel Accent Stripe in left, right and rear car panels Cross-flow Fan & IONFUL CR-b6\b7\b8 Accent Stripe in Left, Right and Rear Metallic Paint Finish（TE-f2） Painted Steel Sheet Fan Car Panel Car Internal Height （TE-a7\ TE-b1\ TE-b2） Cross-flow Fan & IONFUL Metallic Paint Finish（TE-f1） Door 2350mm Accent Stripe in Left, Right and Car Internal Height Painted Steel Sheet （TE-b2） Floor（Selection） Rear Car Panel 2350mm （Vinyl Tile） Door Car Panel Height Painted Steel Sheet Car Panel Height Floor Painted Steel Sheet （TE-b1） 2350mm （TE-a7\ TE-b1\ TE-b2） 2350mm BD-b2
BD-b1
BD-b2
BD-b3 Sill Stainless Steel Fan Cross-flow Fan & IONFUL
Car Operating Board BD-b4 FX-g1
Car Internal Height 2350mm
Car Panel Height 2350mm BD-b5
Note 1: ZE-S5\ S6\ S7 respectively correspond to TE-a7、TE-b1、TE-b2 and BD-b6、BD-b4、 BD-b5. BD-b6 Note 2: The above is the image of ZE-S7. Note 3: For a wide car and 1200kg & 1350kg capacity cars, the rear panel will be divided into five blocks. 9 10 11 Optional Car Design Optional Car Design
ZE-X2 ZE-X3 ZE-X4 ZE-X5
ZE-X1
Ceiling CE-g2 Metallic Paint Finish （TE-f1）
Wall & Transom Stainless Steel with Hairline Finish Accent Stripe in Left, Right and Rear Car Panel Stainless Steel with Hairline Finish Door Stainless Steel with Hairline Finish Floor BD-b6
Sill Stainless Steel
Ceiling Floor Ceiling Floor Ceiling Floor Ceiling Floor CE-g2 Medallion & Plastic Flooring CE-c1 Medallion & Plastic Flooring CE-c2 Medallion & Plastic Flooring CE-c3 Medallion & Plastic Flooring Titanium-Black Coated Stainless Steel Sill Painted Steel Sheet（TE-a7） Sill Metallic Paint Finish（TE-f1） Sill Painted Steel Sheet（TE-b1） Sill with Mirror Finish Stainless Steel Stainless Steel Stainless Steel Stainless Steel Wall & Door & Transom Wall & Door & Transom Fan Fan Metallic Paint Finish（TE-f2） Fan Wall & Door & Transom Fan Wall & Door & Transom Painted Steel Sheet （TE-a7） Cross-flow Fan & IONFUL Cross-flow Fan & IONFUL Accent Stripe in Left and Right Car Panel Cross-flow Fan & IONFUL Etched Stainless Steel with Mirror Cross-flow Fan & IONFUL Laminated Steel Sheet（W-205） Accent Stripe in Left, Right and Rear Stainless Steel with Sandblast Finish Car Internal Height Car Panel Car Internal Height Car Internal Height Finish（YS-015） Car Internal Height Accent Stripe in Left, Right and Rear Accent Stripe in Rear Car Panel 2350mm 2425mm 2445mm Accent Stripe in Left, Right and Rear 2480mm Car Panell Titanium-Gold Coated & Etched Metallic Paint Finish（TE-f2） Car Panel Height Car Panel Height Car Panel Height Car Panel Car Panel Height Stainless Steel with Mirror Finish Stainless Steel with Mirror Half Mirror with SUS-HL Frame Stainless Steel with Mirror Finish 2350mm Finish（YS-059） 2600mm (Mirror by Others) 2600mm 2600mm
Ceiling Ceiling Standard Design CE-g2 Optional Design CE-c1 CE-c2 CE-c3
Fan Cross-flow Fan & IONFUL
Car Operating Board FX-g1
Car Internal Height 2350mm
Car Panel Height 2350mm
Painted Steel Sheet (Standard), Light Bulb Painted Steel Sheet (Standard), Milky White Painted Steel Sheet (Standard), Milky White Painted Steel Sheet (Standard), Milky White Resin Shade, Fluorescent Lamp, Light Bulb Resin Shade, Fluorescent Lamp Resin Shade, Fluorescent Lamp
Note 1: When Design Style 02, 03 and 04 are selected, the overhead height (OH) is increased by 250mm. Note 2: Car internal heights will vary according to ceiling types. For details, please contact our sales team.
12 13 14 Standard Fixtures Optional Fixtures
FX-g1 FX-g4 FX-c1 FX-c41 FX-c51
Floor Indicator : Large and bright Hall Indicator: Bright orange LED clearly orange LED dot-matrix clearly indicates car operation status. indicates the car location even at Moving arrow indicator shows real-time a glance. Moving arrow indicator is operation status. synchronized with car acceleration, deceleration and traveling speeds Polycarbonate Face Plate: The face plate is and it relays real-time operation tough (3H Surface Hardness), flame retardant, status to passengers. and impact resistant. The surface has an anti- aging and a lustrous silver metallic finish.
Capacity Plate: FX-g11 Indicates Maximum Capacity （Optional） Landing Call Button Floor Indicator： Color LCD Screen Interphone: Passengers can communicate with the machine room and the security room in case of emergency.
FX-c4 FX-c5 FX-g5
Floor Selection Button: The button rim of the selected floor lights up in orange for easy recognition and confirmation. FX-g6
Large Door Open Button: The enlarged and high contrasted green button is more noticeable and avoids human error providing better human-machine interface.
Emergency Call Button: In case of emergency, pressing FX-c7 FX-c72 FX-c6 the yellow button will immediately alert the security room and machine room of an emergency situation. The interphone is also activated by this button. FX-g7
Service Console: Operation FX-g8 control and other switches are located in the console box. The console can be opened by authorized personnel with a special key.
FX-c71
Spec Standard Spec Spec Optional Spec Face Plate Resin & Polycarbonate (Wall Mounted Type) Face Plate Stainless Steel with Hairline Finish (Box Type) Indicator Orange Dot-Matrix LED Indicator Orange Dot-Matrix LED：FX-c1，FX-c4，FX-c5，FX-c7，FX-c71 Button Micro Touch Button CP-C1(Resin) Monochrome LCD Screen：FX-c41，FX-c51，FX-c72 Button Micro Touch Button CP-D1(Stainless Steel)
15 16 Optional Fixtures Optional Fixtures
FX-b11 FX-b4 FX-b5 FX-f1 FX-f4 FX-f5
Floor Indicator： Color LCD Screen
FX-b1
FX-f41 FX-f51
FX-b71
FX-b7 FX-b8 FX-b6 FX-f71 FX-f61
FX-f41，FX-f51、FX-f61、FX-f71:Wall Mounted Type; FX-f4、FX-f5 :Box Type
Spec Optional Spec Spec Optional Spec Face Plate Stainless Steel with Mirror and Sandblast Finish (Box Type) Face Plate Resin & Metal Surface(Wall Mounted Type/Box Type) Indicator Orange Dot-Matrix LED Indicator Orange Dot-Matrix LED Button Micro Touch Button CP-C2(Stainless Steel) Button Micro Touch Button CP-D1(Stainless Steel) 17 18 Landing Design Color Chart
The Expert in Control Systems, Providing Solutions Superb Craftsmanship & Smooth Texture
Our advanced control system will meet the various demands from customers for group control system under various building requirements. Robustness, using high-corrosion resistant electro-galvanized steel sheet used as a base material, and comfort, using powder coating finish to provide vibrant and sharp visual effects, are balanced.
Ceiling, Car Panel, Car Door, TE-a9 TE-a7 Landing Door, Jamb Note:TE-f1 and TE-f2 uses sprayed metallic paint which are not applicable to the landing door and jamb.
TE-f1 TE-b1
1 Car TE-f2 TE-b2
Car Panel, Car Door and Landing Door YS-001 YS-004 YS-007 YS-008 （Stainless Steel with Etching）
2 Car YS-015 YS-025 YS-026 YS-059
BD-b1 BD-b2 BD-b3 BD-b4 Car Floor（Vinyl Tile）
BD-b5 BD-b6
The above computer generated colors may differ from actual colors. Group Supervisory Control Please confirm the color with an actual color sample. 19 20 Functions
OPERATION SYSTEM SERVICE FUNCTIONS Driving System PM Synchronous Gearless Traction Machine. Automatic Return to When a car does not receive any registered calls within a preset time, this service function moves the car to a Main Floor (1 Car, 2 predetermined floor and waits in standby mode for a call registration. Floor Height Self- The elevator has a self-learning mechanism that detects each floor height precisely in order to realize the accurate Cars and Group Learning leveling. Operation) IONFUL: PlasmaclusterTM PlasmaclusterTM Ion Generating System, which is built-in to a car's ventilation unit, creates clean air for passenger comfort by Starting Torque Compensation torque is applied before elevator operation to ensure passenger comfort while the elevator is starting to Ion Generating System eliminating germs, odors, bacteria, and allergens inside the car. Compensation move. Anti-Nuisance Function All car calls will be automatically canceled when an extraordinary number of car calls are registered within a very short SAFETY FUNCTIONS time and/or when more than 4 calls are registered but the in-car load is below 100kg. Independent Operation A car designated for exclusive-use will operate independently. Reverse-Direction When a passenger tries to register a car call that is behind the current traveling direction, the system will regard it as a When turned on, the designated car shall respond to car calls only. Car-Call Cancellation nuisance call and ignore it in order to maintain elevator service efficiently.
Attendant Operation a) The car responds to both car and landing calls. Mistaken Car-Call In the case of a mistaken car call registration, 2 consecutive pushes on the registered button within 0.3 to 1.0 second b) When the car is stopped,pressing the "up or down" button on the car console will select the travel direction and Cancellation will cancel the call registration. continuously pressing the same button will close the car door. Rescue Operation to In case a car prematurely stops between floors, a safety circuit will check and determine the situation, then automatically Auto Adjustment of a) Based on registered car and landing calls, the system automatically adjusts the duration (dwell time) for which a car the Nearest Floor and slowly move the car to the nearest available floor. Open-Door Duration stays and keeps its doors open at every floor. b) In accordance with other factors after the doors open (multi-beam sensor, door open button usage), the system Door Opening Failure In case of a door opening failure after arriving at the destination floor, the car will move to the next available floor and automatically adjusts the duration for which a car stays and keeps its doors open at every floor . Rescue Operation automatically open the door. Automatic Fan In case a car doesn' t receive any registered calls for a preset time, its ventilation fan and lights will automatically turn Auto-Separation after In case a car is operating abnormally, the elevator group control system will separate the affected car from group control and Light Control off, so as to reduce energy usage. Elevator Failure (2 Cars) and operate the remaining car normally. Open Door Warning In case the passenger(s) try to forcibly open the car doors during operation or when stopped in an un-leveling zone, a Visual Display on COB A visual display on the COB will provide passengers with timely text messages reflecting current conditions such as warning device will sound an alarm. If the passenger(s) still continue to force the doors open, the car will protectively stop (Car Operating Board) "OVERLOAD", "EMER. OPERATION" (Optional Function). The message can be synchronized with VONIC to provide or remain stopped and only restart after confirming the doors are closed. visual and audio information. Overload Warning In the event a car is overloaded, the car doors will not close and an audible alarm will sound and the Return Signal Output In the event of a fire, the elevator will send a feedback signal to the building system after returning to the designated car console will display "OVERLOAD". from Evacuation Floor evacuation floor. Auto Re-Leveling In case a car does not stop flush with a landing, the device will re-level the car by creeping it up or down. SAFETY FUNCTIONS Door Nudging In the event that car doors remain open past a preset time, the device will initiate a slow-door-closing operation while sounding an audible alarm (The multi-beam door sensor is ignored but the mechanical safety edge system is still active Firefighter's Operation This operation will allow firefighters use of a car for rapid building access. For emergencies, the car will only respond to car when the door is forcibly closed.). calls registered by firefighters. Door Operation In case a car is unable to complete door-opening operation at a destination floor within a preset time, the device will LANDIC: Battery In case a power failure causes passengers to become trapped in a car, a compact battery power source will move Inspection Device move the car to another destination floor registered by the car or a landing call. In the case of something obstructing Powered Automatic the car to the nearest available floor, and open the doors to enable passengers to exit safely. door-closing operation past a preset time, a respective door-closing operation will start to clear the doorway Landing Operation obstruction. Multi-Beam Door The sensor emits multiple infrared beams, creating an invisible curtain covering the entire doorway, even if only a single Multi-Beam Door A mechanical safety edge device can be incorporated with the multi-beam system for car doors. Sensor beam is interrupted, the sensor will stop the closing doors and reopen them. Sensor with Mechanical Safety Edge Five-Way Interphone An interphone system for 5-way communication is installed in the car console. It allows 4 remote interphones to System communicate with the car top, pit, machine room and building security room. Standby Power If a power failure occurs, the car will return to a predetermined evacuation floor or the nearest floor using standby power Operation and will be stopped there on standby. Alarm Buzzer When the emergency button on the car console is pressed, the interphones in the elevator machine room and the Provisions for standby power supply shall be supplied by others. (On Car Top) building security room will sound a warning alarm, and in addition a buzzer mounted on the car top will sound an alarm. Auto-Separation after In the event that a car is operating abnormally under group control, the car will automatically be separated from the group Emergency Car In case there is no interior car lighting, a self-charging battery power source will immediately light up the emergency car Elevator Failure (Group so as to ensure efficient group control operation of the remaining elevators. Lighting lights for passenger safety and relief. Control） Night-Time Self- The elevator automatically checks operation conditions and brake system during the night-time and when not receiving Diagnostic Operation any registered calls. This operation increases passenger safety and maintains high after-sales product quality. SERVICE FUNCTIONS
Power Phase Error Start/ run prevention during phase loss or power supply disruption. Load By-Pass If a traveling car is loaded up to its rated load capacity, it will bypass floors where landing calls have been registered. Monitoring Those registered landing calls will be assigned to the next available car. Operation Time The total operation time of the elevator is recorded in the controller. Visual Display at the The landing indicator will display messages corresponding to special conditions; for example, in the "Load By-Pass" Monitoring Landing condition, the displays at all floors, with the exception of the terminal floors, will display "FULL". Emergency-Stop Emergency stop switches are installed on the car top and in the pit. Parking Operation When elevator operation is shifted to Parking Operation, the designated car(s) will move to and stop at a pre-assigned floor with Switches doors closed and car lights and fan turned off.
Starting Time Counter The starting times of the elevator is recorded in the controller. Arrival Chime (Inside An arrival chime inside the car will sound softly when a car has arrived at a destination floor. Overspeed Protection When the car overspeeds, the electrical protection device detects and stops the car in time. the Car) (Electrical) VONIC: Automatic A computerized voice provides passengers with timely information about car directions, car arrivals, door opening and Overspeed Protection When the car overspeeds, the mechanical protection device detects and stops the car in time. Voice Announcement closing, emergencies, etc. Standard language is English. For other languages, please consult Fujitec representative. (Mechanical) System (English) Motor Idle Protection When the steel wire rope slides, the elevator is capable of inspecting and stopping the operation. Automatic Run / Stop Elevators can automatically be put temporarily out of service via a preset time schedule. Auto Adjustment of Car When the position of the stopped car and the displayed floor do not match, the elevator will automatically correct the Operation (By Timer) Position Error deviation by reaching the terminal floor at once. Power Receptacle in A power receptacle can be installed in the car. (Maximum Wattage : 1KW). Auto Detection and The elevator will automatically detect and record the errors and irregularities through the control system to prevent the a Car Error Recording expected trouble and swift trouble shooting. BMS(Building Through a purpose-built interface, a building management system can receive up-to-date elevator operation data. Electromagnetic This device will reduce interference with peripheral equipment by the elevator and improve the elevator's anti- Management System) Interference Filter interference stability. Interface Fire Operation In the event of a fire, the device will automatically clear all registered calls and move the car directly to a predetermined evacuation floor and immobilize it there (please consult with Fujitec representative in case there are more than two evacuation floors to be CCTV Cable For a CCTV camera, video-signal cables suitable for the hoistway traveling cable and machine room are provided. assigned.). Group Supervisory The new FLEX-NX system utilizes optimal group supervisory control functions which enhances transport efficiency. Car Door Opening This device prevents the car door from opening in a non-locking area and protects passengers from falling into the Control (GSO) Protection Device hoistway. Impact Resistant This system further strengthens the impact resistance of the landing door, effectively protecting passengers from falling Landing Door System into the hoistway. Standard Functions Optional Functions Human Friendly Functions Unintended Car The UCMP system will immobilize the car if the car and landing doors are opened but are not aligned correctly, Movement Protection so as to protect against personal injury and equipment damage. (UCMP) No further notice is provided if there is any change for specification, please understand.
21 22 Specification Planning
450Kg / 2 Panels - Right Side Opening (2SR) (opposite application for 2SL)
Main Specifications
Capacity Speed Number of Stops
450kg、630kg、800kg、1050kg、 1.0mps、1.5mps、1.75mps、 Up to 40 Stops/ Floors 630Kg～1350Kg (2 Panels - Center Opening) 1200kg、1350kg 2.0mps、2.5mps
Remarks: 2.5mps speed is not be applicable for 450kg and 630kg capacity cars.
Travel Height Control System Driving System Up to 110m (up to 1.75mps), 130m VVVF and 32-bit Computer Permanent Magnet (2.0mps and 2.5mps) Distributed Control System Synchronous Gearless System
Operation Mode Door Operation System Door Opening
Single Car, 2 Cars, Group VVVF Control and Permanent 2 Panels - Center Opening
Control System (3 - 8 Cars) Magnet Gearless Door Remark:2 Panels - Side Opening for Operator 450kg Capacity
No further notice will be provided if there are specification changes. The above dimensions are for reference only, the actual engineering design data will be used.
23 24 Planning Planning
Standard Specification (Wall Mounted Type) Machine Room and Hoistway Plan (Wide Car)
Optional Specification (Box Type)
Optional Specification (Box Type)
*1. For 450kg, 630kg, 800kg and 1,350kg capacity cars, the single wrap machine is applied. For 1050kg and 1200kg capacity cars, the full wrap machine is applied. *2.The shown arrangement of the machine room door is only an example. Please consult us for actual arrangement. *3.The shown arrangement of the control panel is only an example. Please consult us for actual arrangement. *4. Dimension tolerance of hoistway shall be +25mm/-0mm. *5. The didmension shall be based on the hoistway with RC-structure. *6. The hoistway's internal dimension shall be calculated after the pit waterproof finish. *7. If the hoistway's internal dimension is too large, it will be necessary to provide intermediate beams. *8. The hoistway's structural wall thickness shall be 150mm or more (not including the finish). *9. The above dimensions are for reference only, the actual engineering design data will be used.
The above dimensions are for reference only, the actual engineering design data will supersede. 25 26 Planning Relevant Dimensions
Machine Room and Hoistway Plan (Deep Car) Rear Counter-Weight
Load- Bearing of Hanging Hook - 3,000kg (Work by Others) Effective Height of the Machine Room (MH) 500 1 Depth (Y) Depth (B) COB
Width (W)
Over Head Height (OH) Width (A)
100 (H ) Width (X) 2 Max.7000mm - Separation Distance Max.7000mm - Separation
Top Floor Hoistway Plan
Side Counter-Weight Total Height
Traveling Height Width (MX) Hoistway Lighting Ventilation Temperature Ventilation (Work by Others) Window Sensor Window (Work by (Work by (Work by Others) Others) Others)
Governor 2100 (H) R 1
Bottom Floor R 2 Depth (MY)
Hoistway Lighting Receptacle Switch Installation (Work by Others) (Work by Others)
Pit Inspection COP Receiving Box
Max.7000mm - Separation Distance Max.7000mm - Separation Receptacle (Work by Others) Pit Depth (P) Machine Room Door
500 W950xH1900
Hatch Side In case the capacity is 450kg, the size of the standard machine room is increased by 100mm in the left and right width than the size of the hoistway. R 3 R 4 Water Proofing The car internal heights and top heights vary by the ceiling type. For details, please contact our sales persons. (Work by Others) Hoistway Section Machine Room Plan
*1. In case the capacity is 800kg, the single wrap machine is applied. In case the capacity is 1050kg, 1200kg and 1350kg, the full wrap machine is applied. *2.The arrangement of the machine room door is only an example. Please inquire us for the actual arrangement. *3.The arrangement of the control panel is only an example. Please inquire us for the actual arrangement. *4. Dimension tolerance of hoistway shall be +25mm/-0mm. *5. The didmension shall be based on the hoistway with RC-structure. *6. The hoistway's internal dimension shall be calculated after the pit waterproof finish. *7. If the hoistway's internal dimension is too large, it will be necessary to provide intermediate beams. *8. The hoistway's structural wall thickness shall be 150mm or more (not including the finish). *9. The above dimensions are for reference only, the actual engineering design data will be used. The above dimensions are for reference only, the actual engineering design data will supersede.
27 28 Power Supply Data Other Works
Ambient Requirements Hoistway Internal Temperature Within 5℃~ 40℃ Relative Humidity The relative humidity of the air shall not exceed 50% if the highest temperature of 40℃ is reached. Comparatively, if the temperature is lower, the relative humidity can be higher. If the monthly average low temperature during the most humid month is no more than 25℃, then the highest relative humidity of that month shall not exceed 90%. If condensation occurs on electrical equipment, relevant counter-measures must be taken. Power Supply Three-Phase Voltage Fluctuation Range ± 7%
Work by Others
Hoistway The structure of the elevator hoistway shall be solid, subjected to fire-proofing treatment and provided with required holes for relevant equipment. The plane dimension of the hoistway is the minimum size determined with plumbing. The vertical allowable deviation of the hoistway is as follows: Hoistway height is less than 30m: 0～+25mm Hoistway height is more than 30m and less than 60m: 0～+35mm Hoistway height is more than 60m: 0～+50mm Cement filling around the entrance jambs. Cement filling surrounding the wall after relevant elevator fixtures are installed. Waterproofing work (including pumping equipment and waterproof treatment after the elevator equipment is installed as required) in the pit.
Divider screens and intermediate support beams when the hoistway is shared (the height of the divider screen will extend to 2.5m above the pit level from the lowest point of the car or counter-weight stroke. The intermediate support beams can be I-beams, and the position of the beams shall be shown in the position of the rail bracket in the hoistway drawings, but shall not interfere with the reserved hole of the landing buttons.)
In case the hoistway is in a brick structure, a ring beam is required, of which the height is not less than 300mm, to be placed, so as to install the rail bracket. (The position of the ring beam shall be shown in the position of the rail bracket in the hoistway drawing.) Installation of emergency exit doors when the distance between the sills of two adjacent landing doors is more than 11m.
(1) Actual values may differ from the above according to the specifications. (2) The rated short circuit breaking capacity is 7.5KA. It would be better not to arrange the space that the people can enter below the pit. (3) When power capacity is selected, the voltage drop at full load and acceleration current should be fluctuated. (4) Please prepare grounding wire specifications according to relevant local codes. Machine Room The structure of the machine room and fire-proofing work, and the installation of the entrance (Includes noise reduction work and provisions for smoke detector(s) as required). In the machine room, each elevator shall be separately equipped with a master switch capable of cutting off all power supply circuits; and this switch shall be capable of cutting off the maximum current when the elevator is in normal use, and have the stable off position and on position, so as to be locked with a padlock or other equivalent locking device in the off position.
Providing holes in the machine room (the floor must be able to bear 700kg/ m2) Providing holes for machine support beams in the machine room and filling work after installation. Lightweight concrete and dustproof finish after the piping work on the machine room floor. Provisions for the entrance of the traction machine and other machineries and its restoration. Provisions for a lifting beam or hook for the machine in the machine room (Note the capacity of the beam/ hook.). Installation of a window and louver for sun light. Installation of stairs to access the machine room. Installation of a ladder and guardrail is required if the floor difference in the machine room is more than 500mm.
Relevant Elevator Equipment Installation of the switchboard for power in the machine room and the lead and wiring of power supply and lighting to the control panel of the elevator. (The supply voltage fluctuation shall be within ±7%) Piping and wiring for interphones and emergency alarm outside the hoistway and machine room. Provisions for lighting equipment in the machine room. (The brightness of the floor in the machine room shall not be less than 200lx) Provisions for exhaust fan(s) or air conditioning equipment in the machine room. (The air temperature in the machine room shall be kept within 5℃~ 40℃.) Provisions for a power socket for machine room and pit inspections. Hoistway Lighting. Install low-voltage (30W) lamps 0.5 meters from the highest and lowest points in the hoistway respectively and at every 7m (maximum) in the middle of the hoistway. The illuminance above the car roof and at 1m above the ground of the pit shall be 50lx at least. A switch for the hoistway lighting will be installed in the machine room and pit respectively.
Other Notes Please use a high-order harmonic prevention product if the electric leakage breaker or electric leakage alarm is installed. arranged. In the building, a 500mm clearance distance must be maintained when installing the telecommunication cable and power line of the elevator. The corroding metal, damaged and insulated gas and conductive dust shall not be provided in the machine room and the hoistway. Storage for elevator parts and installation materials shall be provided.
The above dimensions are for reference only, the actual engineering design data will supersede. No further notice will be provided if there is any future specification changes.
29 30 Fujitec Global Operations
Langfang Plant (China) Shanghai Fujitec City (China)
Ohio Plant (United States) Korea Plant
India Plant Singapore Plant
North & South America Japan East Asia
FUJITEC AMERICA, INC. FUJITEC CO., LTD. FUJITEC (HK) CO., LTD. FUJITEC CANADA, INC. FUJITEC TAIWAN CO., LTD. FUJITEC VENEZUELA C.A. South Asia FUJITEC KOREA CO., LTD. FUJITEC ARGENTINA S.A. FUJITEC URUGUAY S.A. HUASHENG FUJITEC ELEVATOR CO., LTD. FUJITEC SINGAPORE CORPN. LTD. SHANGHAI HUASHENG FUJITEC ESCALATOR CO., LTD. FUJITEC INC. (PHILIPPINES) Europe & Middle East FUJITEC SHANGHAI TECHNOLOGIES CO., LTD. FUJITEC (MALAYSIA) SDN. BHD. FUJITEC SHANGHAI SOURCING CENTER CO., LTD. FUJITEC UK LTD. P.T. FUJITEC INDONESIA FUJITEC DEUTSCHLAND GmbH FUJITEC VIETNAM CO., LTD. Big Wing (Group Headquarters in Japan, Elevator Plant) FUJITEC SAUDI ARABIA CO., LTD. FUJITEC INDIA PRIVATE LTD. FUJITEC EGYPT CO., LTD. FUJITEC (THAILAND) CO., LTD. FUJITEC UAE (DUBAI) OFFICE FUJITEC LANKA(PRIVATE) LTD. FUJITEC PACIFIC, INC. (GUAM)
31 32