Multi-Information Display

Multi-Information Display Check VSA System Check Engine Oil Level Check Charging System If there is a problem with the vehicle If the engine oil is very low or has If you see ‘‘CHECK CHARGING stability assist (VSA) system, you lost pressure, you will see ‘‘CHECK SYSTEM’’ on the multi-information will see ‘‘CHECK VSA SYSTEM’’ on ENGINE OIL LEVEL’’ on the multi- display, it means the battery is not the multi-information display. If you information display. You will also see being charged. See page 409 for see this message, have the VSA the low oil pressure indicator in the more information. system checked by your dealer (see instrument panel flashing or staying page330 ). on. If you see this message, you should take immediate action since serious engine damage is possible. Follow the procedure on page 409 . 96 Multi-Information Display Check Emission System Check Brake System Check Transmission U.S. Instruments and Controls Canada If you see ‘‘CHECK EMISSION If there is a problem with the brake If there is a problem with the SYSTEM’’ on the multi-information system, you will see ‘‘CHECK automatic transmission, you will see display, it means one of the engine’s BRAKE SYSTEM’’ on the multi- ‘‘CHECK TRANSMISSION’’ on the emission systems may have a information display. The parking multi-information display. Avoid problem. Have your vehicle checked brake and brake system indicator in rapid acceleration, and have the by your dealer (see page 410 ). the instrument panel will also come transmission checked by a dealer as on. See page 411 for more soon as possible. information. CONTINUED 97 Multi-Information Display Check ABS System Check Airbag System Check Parking Sensor System If there is a problem in the anti-lock If there is a problem with your front If there is a problem with the brake system (ABS), you will see airbags, side airbags, passenger’s parking sensor system, the multi- ‘‘CHECKABSSYSTEM’’onthe side airbag automatic cutoff system, information display shows a multi-information display. If you see automatic seat belt tensioners, side ‘‘CHECK PARKING SENSOR this message, have your vehicle curtain airbags, driver’s seat position SYSTEM’’ message. See page checked by a dealer (see page 328 ). sensor, or the front passenger’s 301 for more information. weight sensors, you will see ‘‘CHECK AIRBAG SYSTEM’’ on the multi-information display. Take your vehicle to a dealer as soon as possible(seepage34 ). 98 Multi-Information Display Check Left/Right Sliding Door Check Power Tailgate Check DRL System U.S. U.S. Instruments and Controls Canada Canada If there is a problem with either If there is a problem with the power On Canadian model only power sliding door, the multi- tailgate, the display shows ‘‘CHECK If you see a ‘‘CHECK DRL information display shows ‘‘CHECK POWER TAILGATE.’’ See page SYSTEM’’ message on the multi- LEFT SLIDING DOOR’’ or ‘‘CHECK 161 for more information. information display, there is a RIGHT SLIDING DOOR.’’ See page problem in the high beam headlight’s 169 for more information. circuit. Take your vehicle to a dealer to have it checked. CONTINUED 99 Multi-Information Display PAX Warning Messages On U.S. model only For more information, see page 392 . Your vehicle is equipped with the Michelin PAX system. The PAX system uses the multi-information display to show you one of three messages while you are driving with a flat tire. 100 Multi-Information Display Customized Settings You cannot customize the settings The first customizing menu is: With the ignition switch in the ON under these conditions: CHANGE SETTING (II) position, press and hold the DEFAULT ALL INFO button for more than 3 If you turn the ignition switch to seconds. ‘‘CUSTOMIZE ENTRY’’ the ACCESSORY (I) or the LOCK If you want to change any vehicle appears on the multi-information (0) position. control settings, select ‘‘CHANGE Instruments and Controls display. SETTING,’’ and follow the If you move the shift lever out of instructions on page 106 . You can customize some vehicle Park. control settings for ‘‘DRIVER 1’’ and If you want the settings as they were ‘‘DRIVER 2’’ separately. You can cancel each custom setting when the vehicle left the factory, (Driver 1, Driver 2). Press and hold select ‘‘DEFAULT ALL,’’ as To have the driver’s ID detected, the LOCK and SLIDING DOOR described on page 104. make sure you use your transmitter button (passenger’s side) at the to unlock the driver’s door. same time until the LED in the UsetheINFObuttononthesteering remote transmitter will blink twice. wheel to see the settings, and the If you use the key to unlock the At this time, the custom setting is SEL/RESET button to enter your driver’s door, the system cannot changed to the default setting. To selections. recognize either ‘‘DRIVER 1’’ or activate each custom setting (Driver ‘‘DRIVER 2.’’ In this case, when you 1, Driver 2), repeat this procedure. Refer to the table on the following try to enter the customizing mode, The LED will blink for 1 second to pages about the settings you want to ‘‘DRIVER UNKNOWN indicate the custom setting has been customize. CUSTOMIZE IMPOSSIBLE’’ will be activated. displayed, and you cannot customize the settings. CONTINUED 101 Multi-Information Display Group Setup Menu Item Description Setting Option Page METER SETUP LANGUAGE Changes the language used in the display. ENGLISH＊ 108 (P. 107) SELECTION FRENCH SPANISH ADJUST OUTSIDE Changes the outside temperature reading above or －～5F° 0°F± ＊ 5F～° (U.S.) 110 TEMP. DISPLAY below its current reading. －～3C° 0°C±＊ 3C～° (Canada) TRIP A & AVG. FUEL Causes trip meter A and the average fuel economy to ON 112 RESET with REFUEL reset when you refuel. OFF＊ COMPASS ZONE Selects the zone number if the direction of your 18～～＊ 15 114 SELECTION vehicle differs from true north. ELAPSED TIME Resets the elapsed time of your current trip. IGN RESET＊ 117 RESET TRIP A RESET TRIP B RESET POSITION SETUP MEMORY POSITION Changes the driver’s seat to a stored setting. ON＊ 119 (P. 119) LINK OFF LIGHTING INTERIOR LIGHT Changes how long (in seconds) the interior lights stay 15 sec 121 SETUP DIMMING TIME on after you close the doors. 30 sec＊ (P. 121) 60 sec HEADLIGHT AUTO Changes how long (in seconds) the exterior lights 0sec 123 OFF TIMER stay on after you close the driver’s door. 15 sec＊ 30 sec 60 sec ＊: Default setting 102.

Load more