A File Management System Based on Overlapping Sets of Tags
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
11.7 the Windows 2000 File System
830 CASE STUDY 2: WINDOWS 2000 CHAP. 11 11.7 THE WINDOWS 2000 FILE SYSTEM Windows 2000 supports several file systems, the most important of which are FAT-16, FAT-32, and NTFS (NT File System). FAT-16 is the old MS-DOS file system. It uses 16-bit disk addresses, which limits it to disk partitions no larger than 2 GB. FAT-32 uses 32-bit disk addresses and supports disk partitions up to 2 TB. NTFS is a new file system developed specifically for Windows NT and car- ried over to Windows 2000. It uses 64-bit disk addresses and can (theoretically) support disk partitions up to 264 bytes, although other considerations limit it to smaller sizes. Windows 2000 also supports read-only file systems for CD-ROMs and DVDs. It is possible (even common) to have the same running system have access to multiple file system types available at the same time. In this chapter we will treat the NTFS file system because it is a modern file system unencumbered by the need to be fully compatible with the MS-DOS file system, which was based on the CP/M file system designed for 8-inch floppy disks more than 20 years ago. Times have changed and 8-inch floppy disks are not quite state of the art any more. Neither are their file systems. Also, NTFS differs both in user interface and implementation in a number of ways from the UNIX file system, which makes it a good second example to study. NTFS is a large and complex system and space limitations prevent us from covering all of its features, but the material presented below should give a reasonable impression of it. -
Managing File Systems in Oracle® Solaris 11.4
® Managing File Systems in Oracle Solaris 11.4 Part No: E61016 November 2020 Managing File Systems in Oracle Solaris 11.4 Part No: E61016 Copyright © 2004, 2020, Oracle and/or its affiliates. License Restrictions Warranty/Consequential Damages Disclaimer This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. Warranty Disclaimer The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. Restricted Rights Notice If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable: U.S. GOVERNMENT END USERS: Oracle programs (including any operating system, integrated software, any programs embedded, installed or activated on delivered hardware, and modifications of such programs) and Oracle computer documentation or other Oracle data delivered to or accessed by U.S. Government end users are "commercial computer software" or "commercial -
Filesystems HOWTO Filesystems HOWTO Table of Contents Filesystems HOWTO
Filesystems HOWTO Filesystems HOWTO Table of Contents Filesystems HOWTO..........................................................................................................................................1 Martin Hinner < [email protected]>, http://martin.hinner.info............................................................1 1. Introduction..........................................................................................................................................1 2. Volumes...............................................................................................................................................1 3. DOS FAT 12/16/32, VFAT.................................................................................................................2 4. High Performance FileSystem (HPFS)................................................................................................2 5. New Technology FileSystem (NTFS).................................................................................................2 6. Extended filesystems (Ext, Ext2, Ext3)...............................................................................................2 7. Macintosh Hierarchical Filesystem − HFS..........................................................................................3 8. ISO 9660 − CD−ROM filesystem.......................................................................................................3 9. Other filesystems.................................................................................................................................3 -
File System Interface Hui Chen Department of Computer & Information Science CUNY Brooklyn College
CISC 3320 File System Interface Hui Chen Department of Computer & Information Science CUNY Brooklyn College 12/2/2019 CUNY | Brooklyn College 1 Acknowledgement • These slides are a revision of the slides provided by the authors of the textbook via the publisher of the textbook 12/2/2019 CUNY | Brooklyn College 2 Outline • File System Interface • File Concept • Access Methods • Disk and Directory Structure • File-System Mounting • File Sharing • Protection 12/2/2019 CUNY | Brooklyn College 3 File Concept • Contiguous logical address space • Types: • Data • numeric • character • binary • Program • Contents defined by file’s creator • Many types • Consider text file, source file, executable file 12/2/2019 CUNY | Brooklyn College 4 File Attributes • Name – only information kept in human-readable form • Identifier – unique tag (number) identifies file within file system • Type – needed for systems that support different types • Location – pointer to file location on device • Size – current file size • Protection – controls who can do reading, writing, executing • Time, date, and user identification – data for protection, security, and usage monitoring • Information about files are kept in the directory structure, which is maintained on the disk • Many variations, including extended file attributes such as file checksum • Information kept in the directory structure 12/2/2019 CUNY | Brooklyn College 5 File Info/Properties: Examples 12/2/2019 CUNY | Brooklyn College 6 File Operations • File is an abstract data type • Create • Write – at write -
File Systems
“runall” 2002/9/24 page 305 CHAPTER 10 File Systems 10.1 BASIC FUNCTIONS OF FILE MANAGEMENT 10.2 HIERARCHICAL MODEL OF A FILE SYSTEM 10.3 THE USER’S VIEW OF FILES 10.4 FILE DIRECTORIES 10.5 BASIC FILE SYSTEM 10.6 DEVICE ORGANIZATION METHODS 10.7 PRINCIPLES OF DISTRIBUTED FILE SYSTEMS 10.8 IMPLEMENTING DISTRIBUTED FILE SYSTEM Given that main memory is volatile, i.e., does not retain information when power is turned off, and is also limited in size, any computer system must be equipped with secondary memory on which the user and the system may keep information for indefinite periods of time. By far the most popular secondary memory devices are disks for random access purposes and magnetic tapes for sequential, archival storage. Since these devices are very complex to interact with, and, in multiuser systems are shared among different users, operating systems (OS) provide extensive services for managing data on secondary memory. These data are organized into files, which are collections of data elements grouped together for the purposes of access control, retrieval, and modification. A file system is the part of the operating system that is responsible for managing files and the resources on which these reside. Without a file system, efficient computing would essentially be impossible. This chapter discusses the organization of file systems and the tasks performed by the different components. The first part is concerned with general user and implementation aspects of file management emphasizing centralized systems; the last sections consider extensions and methods for distributed systems. 10.1 BASIC FUNCTIONS OF FILE MANAGEMENT The file system, in collaboration with the I/O system, has the following three basic functions: 1. -
Using Hierarchical Folders and Tags for File Management
Using Hierarchical Folders and Tags for File Management A Thesis Submitted to the Faculty of Drexel University by Shanshan Ma in partial fulfillment of the requirement for the degree of Doctor of Philosophy March 2010 © Copyright 2010 Shanshan Ma. All Rights Reserved. ii Dedications This dissertation is dedicated to my mother. iii Acknowledgments I would like to express my sincerest gratitude to my advisor Dr. Susan Wiedenbeck. She encouraged me when I had struggles. She inspired me when I had doubts. The dissertation is nowhere to be found if it had not been for our weekly meetings and numerous discussions. I’m in great debts to all the time and effort that she spent with me in this journey. Thank you to my dissertation committee members, Dr. Michael Atwood, Dr. Xia Lin, Dr. Denise Agosto, and Dr. Deborah Barreau, who have guided me and supported me in the research. The insights and critiques from the committee are invaluable in the writing of this dissertation. I am grateful to my family who love me unconditionally. Thank you my mother for teaching me to be a strong person. Thank you my father and my brother for always being there for me. I would like to thank the iSchool at Drexel University for your generosity in supporting my study and research, for your faculty and staff members who I always had fun to work with, and for the alumni garden that is beautiful all year round. Thank you my friends in Philadelphia and my peer Ph.D. students in the iSchool at Drexel University. -
Introduction to ISO 9660
Disc Manufacturing, Inc. A QUIXOTE COMPANY Introduction to ISO 9660, what it is, how it is implemented, and how it has been extended. Clayton Summers Copyright © 1993 by Disc Manufacturing, Inc. All rights reserved. WHO IS DMI? Disc Manufacturing, Inc. (DMI) manufactures all compact disc formats (i.e., CD-Audio, CD-ROM, CD-ROM XA, CDI, PHOTO CD, 3DO, KARAOKE, etc.) at two plant sites in the U.S.; Huntsville, AL, and Anaheim, CA. To help you, DMI has one of the largest Product Engineering/Technical Support staff and sales force dedicated solely to CD-ROM in the industry. The company has had a long term commitment to optical disc technology and has performed developmental work and manufactured (laser) optical discs of various types since 1981. In 1983, DMI manufactured the first compact disc in the United States. DMI has developed extensive mastering expertise during this time and is frequently called upon by other companies to provide special mastering services for products in development. In August 1991, DMI purchased the U.S. CD-ROM business from the Philips and Du Pont Optical Company (PDO). PDO employees in sales, marketing and technical services were retained. DMI is a wholly-owned subsidiary of Quixote Corporation, a publicly owned corporation whose stock is traded on the NASDAQ exchange as QUIX. Quixote is a diversified technology company composed of Energy Absorption Systems, Inc. (manufactures highway crash cushions), Stenograph Corporation (manufactures shorthand machines and computer systems for court reporting) and Disc Manufacturing, Inc. We would be pleased to help you with your CD project or answer any questions you may have. -
File System (Interface)
File System (Interface) Dave Eckhardt [email protected] 1 Synchronization Today Chapter 11, File system interface Not: remote/distributed (11.5.2!!) Don't forget about Chapter 13 Reviewing might help demystify readline() some “Fourth Wave” of readings posted to web site 2 Synchronization Two interesting papers about disks http://www.seagate.com/content/docs/pdf/whitepaper/ D2c_More_than_Interface_ATA_vs_SCSI_042003.p df Google for “200 ways to revive a hard drive” 3 What's a file? Abstraction of persistent storage Hide details of storage devices sector addressing: CHS vs. LBA SCSI vs. IDE Logical grouping of data May be physically scattered Programs, data Some internal structure 4 Typical file attributes Name – 14? 8.3? 255? Unicode? ASCII? 6-bit? RADIX-50? Identifier - “file number” Type (or not) Location – device, location Size – real or otherwise Protection – Who can do what? Time, date, last modifier – monitoring, curiousity 5 “Extended” file attributes BSD Unix archived nodump append-only (user/system) immutable (user/system) MacOS icon color 6 Operations on Files Create – locate space, enter into directory Write, Read – according to position pointer/cursor Seek – adjust position pointer Delete – remove from directory, release space Truncate Trim data from end Often all of it Append, Rename 7 Open-file State Expensive to specify name for each read()/write() String-based operation Directory look-up “Open-file” structure stores File-system / partition File-system-relative file number Read vs. write Cursor position 8 Open files (Unix Model) “In-core” / “Open file” file state Mirror of on-disk structure File number, size, permissions, modification time, ... Housekeeping info Back pointer to containing file system #readers, #writers Most-recently-read block How to access file (vector of methods) Pointer to file's type-specific data Shared when file is opened multiple times 9 Open files (Unix Model) “File-open” state (result of one open() call) Access mode (read vs. -
430 File Systems Chap
430 FILE SYSTEMS CHAP. 6 6.4 EXAMPLE FILE SYSTEMS In the following sections we will discuss several example file systems, rang- ing from quite simple to highly sophisticated. Since modern UNIX file systems and Windows 2000’s native file system are covered in the chapter on UNIX (Chap. 10) and the chapter on Windows 2000 (Chap. 11) we will not cover those systems here. We will, however, examine their predecessors below. 6.4.1 CD-ROM File Systems As our first example of a file system, let us consider the file systems used on CD-ROMs. These systems are particularly simple because they were designed for write-once media. Among other things, for example, they have no provision for keeping track of free blocks because on a CD-ROM files cannot be freed or added after the disk has been manufactured. Below we will take a look at the main CD- ROM file system type and two extensions to it. The ISO 9660 File System The most common standard for CD-ROM file systems was adopted as an International Standard in 1988 under the name ISO 9660. Virtually every CD- ROM currently on the market is compatible with this standard, sometimes with the extensions to be discussed below. One of the goals of this standard was to make every CD-ROM readable on every computer, independent of the byte order- ing used and independent of the operating system used. As a consequence, some limitations were placed on the file system to make it possible for the weakest operating systems then in use (such as MS-DOS) to read it. -
File Systems Performance Analysis
File Systems Performance Analysis Benchmarking project for the lecture Computer Performance Analysing And Benchmarking lectured by Prof. Thomas M. Stricker at Swiss Federal Institute of Technology Written by Stefan Rondinelli File Systems Performance Analysis Project CONTENTS 0 Introduction 2 1 The Environment 2 1.1 The Hardware 2 1.2 The Software 3 2 Performing the Benchmark 4 2.1 The Proceeding 4 2.2 The Output 5 3 Statistical Analysis of the Data 6 3.1 Computation of Effects 6 3.2 Confidence Intervals 7 3.3 Are the File Systems Significantly Different? 8 4 References 10 - 1 - File Systems Performance Analysis Project 0 Introduction Every operating system has its own file systems. For example Windows uses FAT16(File Allocation Table 16(bits)), FAT32(File Allocation Table 32) and NTFS(Windows NT File System), Linux uses Minix fs, Extended fs and ext2 and a Mac has its (discarded) MFS(Macintosh file system) and HFS(Hierarchical File System) file systems. Sometimes file systems of other operating systems are supported what for example is desired in a dual boot system (e.g. Linux and Windows). When using such a dual boot machine with Linux and Windows, the performance of a file system could be one of the considerations when choosing what file systems to use for the different partitions. In this project I am going to benchmark some file systems and finally to analyze the gathered data statistically as learned in the lecture. 1 The Environment 1.1 The Hardware I used the following hardware for the performance analysis: - CPU: AMD K6II 450Mhz (has a 64kB cache) - RAM: 64MB SDRAM - Hard disk 1: Western Digital Caviar 36400 (6 GB) - Hard disk 2: Western Digital Caviar 33200 (3 GB) - Disk controller: IDE for both hard disks To have the same conditions these components affecting the I/O speed must be the same ones for all the measurements of the performance of the different file systems otherwise the differences in the measured data would rather be due to unequal hardware then to the different implementation of a file system. -
Sistemul De Fisiere
Operating Systems Course #6 Filesystems Răzvan Daniel ZOTA Faculty of Cybernetics, Statistics and Economic Informatics [email protected] http://zota.ase.ro/os Introduction to filesystems What is a filesystem? • A filesystem is an integral part of an operating system, consisting of files, directories and all the information needed to access, locate (and recover, if needed) and manipulate them. 2 File system structure – Unix/Linux File System Structure Unix Operating System “Root” Directory Unix Operating System “Root” Directory / bin dev etc lib opt tmp usr var P K jdk-1.1 bin lib man spool 3Com SCO Skunk97 acct cron mail terminfo uucp 3 File system structure – Windows Example: 4 The most important Unix directories /bin UNIX commands /dev Devices directory Files required to boot the system and communicate, and /etc scripts to control the boot process /kernel Contains the kernel and drivers for the kernel /mnt The “mount” directory; reserved for mounting filesystems /opt locally installed packages and files Files required to start the system and scripts to control /sbin the boot process /shlib Shared libraries /tmp Temporary directory /usr User routines 5 The most important Linux directories /bin Binary (executable) files – basic system programs System boot directory. The kernel, module links, system /boot map, and boot manager reside here /dev Devices directory /etc System wide configuration scripts Process directory. Contains information and statistics /proc about running processes and kernel parameters System wide device directory. Contains information and /sys statistics about device and device names /tmp Temporary directory /usr/bin More system binaries /usr/local/bin Miscellaneous binaries local to the particular machine /usr/share/doc Documentation for installed packages 6 OSs and supported filesystems OS Filesystems Windows 7/8/10 NTFS, FAT16, FAT32 Mac OS X HFS+ (Hierarchical File System Plus) Linux Ext 2, Ext 3, Ext 4 •NTFS (New Technology File System)- was introduced in Windows NT and at present is major file system for Windows. -
Alternate Data Streams in NTFS
Alternate Data Streams in NTFS Author: Conrad Chung, 2BrightSparks Introduction 20 years ago, Microsoft developed the Windows NT operating system based on the popular NT platform. Since then, it has continued to develop newer operating systems like Windows 8 and Windows Server 2012 using the same platform. Despite the widespread use of Microsoft’s operating systems, Windows users may not be aware of a lesser known feature in the NTFS file system (New Technology File System) called Alternate Data Streams (ADS). This article aims to provide some essential information on ADS as well as its uses and drawbacks. What are Alternate Data Streams? Since the introduction of Windows NT 3.1, NTFS has been the preferred file system developed by Microsoft for its NT-based operating systems. NTFS was implemented to replace the FAT (File Access Table) file system used by older operating systems like Windows 9x. Alternate Data Streams within NTFS allow the embedding of metadata in files or folders without altering their original functionality or content. In NTFS, the main data stream refers to the standard content (if any) of the file or folder, and this is usually visible to the user, while alternate data streams are hidden. The Windows operating system does not provide the means for any Microsoft Windows Utilities to detect the presence of ADS, thus they are not visible to the vast majority of file management applications like Windows Explorer. Alternate streams do not have any size limits and several streams can be linked to a normal file. The contents of ADS is not limited to text data; essentially any file that is in binary format can be embedded as an alternate stream.