Software Unique Features Interfacing Engineering

Total Page:16

File Type:pdf, Size:1020Kb

Software Unique Features Interfacing Engineering 3 1 Software Unique Features Unique made in Germany in made Common Feature Set Feature Common > Homogeneous for all SVCam Products SVCam all for Homogeneous > Same SDK Software SDK Same > GigE Vision, GenICam, Camera Link or PoCL and PoE and PoCL or Link Camera GenICam, Vision, GigE Precise I/O-Control and Timing and I/O-Control Precise > CoaXPress, USB3, like: Standards with Compliant > Programmable Sequencer for Shutter and LED-Light LED-Light and Shutter for Sequencer Programmable > Software: Power Driver for LED-Light for Driver Power > Configurable Frame Rates for Speed or Dynamic or Speed for Rates Frame Configurable > Unique Features Unique Differential RS-422 and Serial RS-232 In- and Out-put and In- RS-232 Serial and RS-422 Differential > up to 4 x Power Output (open drain) (open Output Power x 4 to up > up to 4 x Trigger Input, Trigger x 4 to up > Configurable I/O-Matrix Configurable > Industrial Protection Class up to IP67 to up Class Protection Industrial > Versatile I/O-Concept: I/O-Concept: Versatile Temperature Management Management Temperature Advanced > Durable rugged Mechanical Design Mechanical rugged Durable > Optical Precision Precision Optical > Industrial Connectivity (Hirose and M12 versions) versions) M12 and (Hirose Connectivity Industrial > Housing Support for Micro-Four-Thirds Lenses Micro-Four-Thirds for Support > same Connectivity same • same Signal Levels Signal same • Individual Custom OEM Designs OEM Custom Individual > same Pin-Out same • Flexible & Scalable & Flexible > Concept: Interfacing Homogeneous > Design and Production and Design Interface to Industry to Interface made by SVS-VISTEK by made SVCam Camera Concept Camera SVCam Engineering Interfacing Supported Features and Technologies: Industrial Connectivity: Competence in Light and Optic: > Progressive Scan CCD sensors (VGA up to 29 MP) Hirose 1 VIn- (Gnd) > Global Shutter CMOS sensors 2 VIn+ (10 – 25V DC) 3 RXD (RS232) > CCD sensors with advanced1 9 Tap Balancing (manual or automatic) 1 9 3 2 4 TXD (RS232) 2 8 2 10 8 2 > Monochrome and Color Versions10 (Bayer Pattern) 4 1 5 In1 5(0 – 24V) 3 12 7 3 1111 1012 7 11 5 9 3 > White balance for color4 versions6 (one push, continuous or manual) 4 125 6 6 In2 (0 – 24V) 5 6 8 4 > Various binning modes 7 7 Out1 (open drain) 8 Out2 (open drain) > User-definable ROI (Region of Interest) 9 In3+ (RS422) > Partial Scan Modes Ethernet 10 In3-2 (RS422) > Decimation Modes for higher frame rates 1 4 11 Out3+ 3(RS422) > Selectable Data- and Frame-1 4 Rate 2 3 12 Out3- M12(RS422) RJ45 M12 RJ45 03/2015 2 3 > Flat Field Correction 1 1 WaH-OG 1 1 WaH-OG > Shading Correction RJ-452 2 OG 2 2 OG 1 2 3 4 5 6 7 8 > Defect Pixel Correction 3 Features with3 WH-GN real value: Power3 your LED light directly from your3 WH-GN > Adjustable Gain and Offset 4 SVCam series6 GN and use it as an4 innovative strobe controller. 6 GN > Auto-Exposure and Auto-Gain Industrial Ethernet M125 5 WH-BU 5 5 WH-BU 1 2 1 5 4 Industrial Cameras > Image Flip on the FPGA 5 6 4 BU 6 4 BU 2 6 3 Color Pin Pin RJ45 3 3 4 > Look-Up-Table for Digital Resolution Mapping 7 WHOG 1 1 7 WH-BN 7 7 WH-BN SVCam-Concept made by SVS-VISTEK > Exposure controlled by Trigger, manually or automatically 7 2 8 1 8 OG 2 2 8 BN 8 8 BN > 8 or 12 Bit Video Data Stream (14 Bit on the ADC) WHGN 3 3 > Wide Range Power Conditions: 10 – 25 V DC BU 8 4 > Various Trigger (int./ext./free running) and Exposure Modes > Programmable Sequencer for Shutter and Light Intensity WHBU 7 5 > Pulse-Width Strobe-Control GN 4 6 > Logical Trigger Functions WHBN 5 7 > Schmitt-Trigger (Debouncer) BN 6 8 > Particle Image Velocimetry (PIV-Mode) > Built-in LED Controllers Industrial M12 - I/O Connector > Versatile I/O-Concept: Color Pin • Configurable I/O-Matrix BN 1 VIN+ (10V to 25V DC) • up to 4 x Trigger Input BU 2 VIN- (GND) Direct control of CANON EF- or MFT- lenses. • up to 4 x Power Output (open drain) WH 3 RXD (RS232)* • Differential RS-422 and serial RS-232 In- and Out-put GN 4 TXD (RS232)* > GigE or Dual GigE Interface PK 5 IN1 (0-24V) > Camera Link Interface > GigE Vision and GenICam Standard Compliant YE 6 IN2 (0-24V) > Support for all Lens Mount Standards BK 7 OUT1 (open drain) > Micro Four Thirds Bayonet (MFT) Standard supported GY 8 OUT2 (open drain) > Prepared for Lens-Tilt Unit RD 9 IN3+ (RS422) > Operating Temperature Range from -10°C to +45°C (ambient) VT 10 IN3 – (RS422) > SDK for Windows (32/64 Bit) and Linux available GYPK 11 OUT3+ (RS422) > Intuitive Graphical User Interface RDBU 12 OUT3 – (RS422) > Power over Camera Link (PoCL) > Power over Ethernet (PoE) on request Camera Link Standard 13 26 1 13 Industrial Cameras + Imaging Components. Ask us or your local 14 26 SVS-VISTEK Partner. 1 14 For more information our sales team will be pleased to assist you Germany SVS-VISTEK GmbH with expert advice. Please contact us. Mühbachstr. 20 82229 Seefeld Tel. +49 (0) 81 52 99 85 0 Fax +49 (0) 81 52 99 85 79 [email protected] www.svs-vistek.de USA SVS-VISTEK Inc. Minnesota Tel. +1 (651) 756 8632 [email protected] Camera Overview www.svs-vistek.com Japan SVS-VISTEK K.K. Yokohama Tel. +81 8070 331 689 [email protected] www.svs-vistek.com ECO-Series ECO2-Series BlackLine-Series HR-Series VGA up to 5 Megapixel GigE VISION Cameras 1 up to 12 Megapixel GigE Vision Cameras GigE Vision Cameras up to IP 67 protection class High Resolution Cameras, up to 29 Megapixel ECO BlackLine GigE Vision Cameras Special Features of the ECO BlackLine Series: > Sony sensors from VGA to 5 megapixel 2 Factory automation is dependent on reliable and efficient solutions. For this to ECO GigE Vision Cameras Special Features of the ECO Series: ECO2 GigE Vision Cameras Special Features of the ECO Series: happen, the components for machinery, controls and industrial image processing > Also with ON Semi Sensors from 1 to 4 megapixel HR GigE Vision Cameras Special Features of the HR GigE Series: Unsurpassed flexibility with great performance and affordability. This characterizes > Progressive Scan CCD sensors The SVCam-ECO² significantly extends the range of our „standard camera ECO“. In the > 1 up to 12 megapixel need to work in total harmony. SVS-VISTEK‘s „BlackLine“-standard makes it easier > Up to IP67 protection class (including lens tube) The GigE cameras of the HR series impress with their housing concept, the wide-range lenses > Dual GigE Vision data interface the SVCam-ECO series best. You will find all popular CCD-Sensors from Sony in the ECO > Area of interest modes (AOI) same form factor as the renowned -ECO series with sensors from ON Semi and Sony up > Progressive Scan Sensors and more cost efficient to integrate the delicate image processing parts even in > M12 connector concept for industrial field wiring and the unique picture quality. Thanks to the dual GigE connection with the 4-Tap Version it > GigE Vision and GenIcam standard compliant is possible to achieve a maximum data rate of up to 240 MByte/s. series. SVCam-ECO cameras are available in more than 100 different versions with > 8/12 Bit video data stream (14 Bit ADC) to 12 mega pixels are supported with reasonable pixel sizes. The possible bandwidth > 2 x direct drive and control of LED lighting harsh environments. > 2 x direct drive and control of LED lighting > Two parallel ethernet connections enable increased data rates resolutions from VGA up to 5 megapixel. ECO series cameras are designed to achieve high of the GigE Vision interface is hereby fully exploited. The special and robust BlackLine A further advantage is the reliable, cost-effective transmission of the image data over > 64 MB memory inside > GigE Vision and GenICam compliance > Dimensions [mm]: 42 x 42 x 31 > Cable lengths up to 100 meters are possible frame rates while maintaining excellent signal-to-noise ratios and at the same time > White balance for color versions (one push or manual) version with M12 plug-in system, suitable for the automation world is a powerful option > Industrial IO interface for easy integration a distance of 100 m with standard network technology. The GigE Vision and GenICam GigE standards ensure rapid integration into the application software. > Any AOI possible (Area of Interest) providing a small footprint. Supporting the standards of GigE Vision™ and GenICam™ > Wide range Power conditions: 10 – 25 V DC for the ECO². The feature set, as well as the pin assignments, is a coherent piece of > Dimensions [mm]: 38 x 38 x 45 the SVCam-ECO series opens up new dimensions for integration into your application engineering and particularly user-friendly. The ECO² series is the perfect extension of the > SDK for Windows (32/64 bit) and Linux available > Sequence-Shutter and enhanced Strobe-Functionality Model [MP] Resolution [Pixel] Format Sensor Pixel [µm] Architecture Mount max. Frame Rate [fps] SW-Environment. ECO series and ensures long-term and reliable technology. > Dimensions [mm]: 70 x 71 x 53 > Up to 4 x direct drive and control of LED lighting eco618 0.3 656 x 492 1/4“ Sony ICX618 5.6 CCD C 155 (+/– 3 mm, depending on interface) > Dimensions [mm]: 38 x 38 x 33 GigE eco424 0.3 656 x 492 1/3“ Sony ICX424 7.4 CCD C 124 HR Camera Link Cameras Special Features of the HR Camera Link and CXP Series: GigE Model [MP] Resolution [Pixel] Format Sensor Pixel [µm] Architecture Mount max.
Recommended publications
  • T-Mount - Wikipedia
    4/1/2020 T-mount - Wikipedia T-mount The T-mount is a standard lens mount for cameras and other optical assemblies. The usual T-mount is a screw mount using a T-mount male 42×0.75 (42 mm diameter, 0.75 mm thread pitch) metric Type screw thread on the lens with a flange focal distance of 55 mm and a External diameter 42 mm mating female 42mm thread on a camera adapter or other optical component. This thread form is referred to as T-thread. (This Flange 55 mm should not be confused with the M42 lens mount which is also Connectors None 42 mm diameter, but has a 1 mm thread pitch. The T-thread is sometimes described as "M42x0.75," which is the usual manner in which to describe the thread.) The "T" is said to stand for Tamron or Taisei, a Japanese manufacturer that released in 1957 the first of a line of aftermarket camera lenses that fit 35 mm SLR cameras built by various manufacturers using their universal T-mount. On the first model, the mini T-mount used a M37×0.75 thread; Tamron's canonical M42×0.75 T-thread didn't appear on the market until about 1962. The company referred to it variously as a T-mount, T-thread, T-adapter, or a T-400, but not as a T-2, which is simply the name that Soligor used for its version of the T-adapter. The proprietary lens mount of each camera manufacturer was adapted to the T-mount thread with a simple adapter.
    [Show full text]
  • A Complete Optical Measurement and Testing System
    ® POWERED BY OPTEST 7 SOFTWARE A Complete Optical Measurement and Testing System ® OpTest System for VIS through LWIR, up to 600mm diameter, for any application LensCheck™ Instrument offered for smaller diameter lenses, low-volume production Understanding Lens and Image Quality Optical design and fabrication engineers understand that lens elements and optical systems are seldom perfect. Despite the presence of the most sophisticated design and manufacturing techniques, lenses can still vary considerably in quality. Optikos is a leader and pioneer in lens and image testing and our products and systems are based on over thirty- five years of experience and innovations in optical engineering. The result is that our customers are able to use the most advanced metrology tools for performing accurate and efficient lens and camera system measurements and improve their product quality and performance. Our flagship lens testing products include the OpTest® Lens Measurement System with a complete range of hardware options, and the LensCheck™ VIS and LWIR instruments—compact systems that are portable and easy-to-use for smaller lenses. Both are powered by OpTest® 7, Optikos® proprietary software. ® WHATEVER YOU DESIGN, YOU CAN MEASURE WITH OPTEST SYSTEMS The OpTest Lens Measurement System includes the latest technologies and innovations in optical and opto- mechanical engineering. Other products on the market typically manufacture their systems around general purpose off-the-shelf lab components, while every step of an Optikos solution is a custom one. OpTest systems are composed of custom optics, mechanics, and electronics designed by Optikos engineers solely for the purpose of lens testing. Optikos offers the most comprehensive product line for lens testing.
    [Show full text]
  • DS Manual Scheimpflug Mountv3.Indd
    LaVisionLaVision We count on Photons We count on Photons Scheimpfl ug The LaVision manual Scheimpfl ug mount version3 is designed for the adjustment of the angle mount between a camera and its lens (Scheimpfl ug angle). The Scheimpfl ug mount can be rotated in order to align tilt axis. The Scheimpfl ug angle is changed by tilting the camera lens with respect version3 to the sensor plane. Features large Scheimpfl ug angle up to 20° Scheimpfl ug rotation axis aligned with camera chip = image center does not move when changing the Scheimpfl ug angle free orientation of the camera for oblique Scheimpfl ug angles wide internal aperture for large camera chips very compact design Smaller cameras can be supported directly by the Scheimpfl ug adapter, to simplify the alignment for oblique angles. The Scheimpfl ug mount version3 is especially designed to be used in Tomographic PIV sys- tems, Stereoscopic PIV systems, StrainMaster 3D and other LaVision Imaging products, which operate with 2 or more cameras. Tomographic PIV or 3D StrainMaster systems often need large Scheimpfl ug angles from oblique viewing points. The Scheimpfl ug mount version3 allows maintaining Scheimpfl ug angles up to 20° from any camera orientation without signifi cant loss of light intensity due to its free space internal design. Even at largest angles the internal obstruction is reduced to a minimum. Highspeed cameras with their large CMOS chip dimensions profi t from the large internal aperture of the Scheimpfl ug adapter. La VisionUK Ltd La Vision GmbH La Vision Inc. Downsview House/ Grove Technology Park Anna-Vandenhoeck-Ring 19 211 W.
    [Show full text]
  • Standard Lens Mount Adapters
    Standard Lens Mount Adapters Lens mount adapters are available for a variety of lens types, including both threaded lenses and bayonet-style lenses. The lens adapters generally consist of a circular plate with the appropriate lens mount features in the center of the plate and a set of holes near the circumference that allow the adapter plates to be installed on the LensCheck™ or OpTest® system. The basic geometry of these adapters and the available types are included in this document. Prices for each adapter are available upon request. Adapter Types There are three basic categories of LensCheck and OpTest Lens Mount Adapters: o LC Series adapters are designed to mount to the LensCheck tower o RLM Series adapters are designed to mount to the LensCheck Rotary Lens Mount o OPT Series adapters are designed to mount to the OpTest LM-300 Tip/Tilt Lens Mount Optikos also provides a series of miscellaneous adapters and plates that are shown in the last section of this document. Standard LensCheck™ Adapters (LC Series) Standard LensCheck adapters have four through threaded holes designed for use with the standard LensCheck Tower as shown below. LensCheck Adapter Bolt Pattern LensCheck Tower Mount ©Optikos Corporation Issue Date: October 3, 2016 An example of an LC type adapter is shown below. M12 Adapter for LensCheck LensCheck Rotary Mount Adapters (RLM Series) The LensCheck Rotary Mount Adapters are designed for use on the LensCheck Rotary Lens Mount. These adapters have three through-holes that allow it to be installed on the Rotary Lens Mount using M3 screws. Examples of RLM type lens adapters are shown below.
    [Show full text]
  • Digital SLR Astrophotography: Practical Amateur Astronomy Michael A
    Cambridge University Press 978-0-521-70081-8 - Digital SLR Astrophotography: Practical Amateur Astronomy Michael A. Covington Index More information Index aberration video 202–206, 203, 204 lens 58, 114,115 RegiStax 205, 206 spherical 73–74, 77 asymmetric triplet lens 85 accuracy, subpixel 110 atmosphere, refraction 106 adapters aurora borealis 42 camera–telescope 53, 53, 54–55, 55 auto exposure 6, 35, 39 lens mount 80–81 auto power setting 35 M42 82–84, 83 auto rotate setting 33 quality 81–82 autofocus 28,76 afocal coupling 32, 51, 52, 199 see also lenses, autofocus Moon photography 39–40, 41, 42 autoguiders 108–110 aggressiveness, autoguider 110 average (mean), image combining 179 airplane trails 16, 180 alignment B+W 091 filter 141 image processing 154–155 balance polar 99, 103, 104, 105 color 28 drift method 104–105, 105 white 28 alpha channel see layer masking Barlow lens 52, 57, 86,87 Altair star field 18 batteries altazimuth telescope mounts 44–45, 99, 100, lead–acid 116–117 101, 110–115, 112, 113 lithium-ion 117 amplifier glow 132, 132, 147 Bayer matrix 22–23, 22, 153 analog-to-digital units 130 see also de-Bayerization Ang´enieux Retrofocus lens 85 bias 131 anti-reflection coating 84, 87 bias frames 146, 147, 183, 185 aperture 56 binning 133 manual control 26, 27 bit depth 165 APS-C format 19, 59, 62, 63, 71, 71, 72 BlackFrame NR 164 APS-H format 19 blooming 132 asteroid movement, Photoshop 183, 184 blur 73 astronomy deconvolution 175–176, 176 image processing techniques 178–195 see also bokeh 209 © in this web service Cambridge University Press www.cambridge.org Cambridge University Press 978-0-521-70081-8 - Digital SLR Astrophotography: Practical Amateur Astronomy Michael A.
    [Show full text]
  • Still Photography
    STILL PHOTOGRAPHY Paper Code: 108 Second semester Course Code : BJ(MC) 108 L : 4 T/P : 0 CREDITS : 4 Unit-I [Introduction to Photography] L- 10 1. What is photography? 2. Brief History of photography. 3. How Camera works? 4. The role & importance of photography. 5. Principles of Camera Obscura Unit-II [Camera] L- 18 1. What is Camera? 2. Basic Parts of single lens reflex (SLR) [film & digital] : 1. Lens 2. Film Chamber (CCD & CMOS) 3. Aperture 4. Shutter 5. View finder 6. Pentaprism 7. Memory (Internal & External) 3. Camera formats – 35mm, medium format, large format 4. Camera design & its working – simple camera, compact camera, view camera, range finder & reflex camera TLR, SLR, POLOROID, UNDERWATER CAMERA & DIGITAL CAMERA 5. Lenses – controlling the image 1. Photographic lenses – prime & zoom lens, angle of view (Narrow & Wide Angle Lens) 2. Aperture, Focal No. & Focal Length 3. Depth of focus, Depth of Field and How they work 4. Lens care 1. Lens perspective, film speed, flash gun, light meter 2. Exposure 1. Measurement of light – exposure metering system 2. Exposure control – relationship between shutter speed and aperture 3. Camera accessories: Tripod, monopod, filters, Lens hood UNIT-III [Lighting And Visual Communication] L- 10 1. Lighting 1. Sources of light : Natural & Artificial 2. Nature and physical properties of light 3. Direction & angle of light : Front, side, top & back 4. Lighting contrast and its control by fill in lights 5. One, two & three point lighting : Key, fill and back light 2. Principles of Photographic composition 3. Various types of photography: Portrait, Wildlife, Nature, Photo Journalism, Advertising and Night photography UNIT-IV [Printing of Photograph] L- 10 1.
    [Show full text]
  • Lens Mount - Wikipedia, the Free Encyclopedia
    Lens mount - Wikipedia, the free encyclopedia http://en.wikipedia.org/wiki/Lens_mount From Wikipedia, the free encyclopedia A lens mount is an interface — mechanical and often also electrical — between a photographic camera body and a lens. It is confined to cameras where the body allows interchangeable lenses, most usually the rangefinder camera, single lens reflex type or any movie camera of 16 mm or higher gauge. Lens mounts are also used to connect optical components in instrumentation that may not involve a camera, such as the modular components used in optical laboratory prototyping which join via C-mount or T-mount elements. A lens mount may be a screw-threaded type, a bayonet-type, or a breech-lock (friction lock) type. Modern still camera lens mounts are of female lens mount of an Minolta XD-7 the bayonet type, because the bayonet mechanism precisely aligns with male mount of Minolta mechanical and electrical features between lens and body. Screw-threaded MC-Rokkor 58mm 1:1.4 lens mounts are fragile and do not align the lens in a reliable rotational position, yet types such as the C-mount interface are still widely in use for other applications like video cameras and optical instrumentation. Bayonet mounts generally have a number of tabs (often three) around the base of the lens, which fit into appropriately sized recesses in the lens mounting plate on the front of the camera. The tabs are often "keyed" in some way to ensure that the lens is only inserted in one orientation, often by making one tab a different size.
    [Show full text]
  • Download the Full Report of the Project of Tom Feij and Sven Deinum
    Contents Introduction 3 Glossary 4 Research question 4 Chapter 1: Timeline of photography history 5 Chapter 2: Analysis of cameras types in three categories 2.1 INTRODUCTION 16 2.2 THEORY OF ANALYSIS 16 2.3 STANDARD CAMERAS 18 2.4 MAINSREAM UNUSUAL 25 2.5 UNUSUAL 37 2.6 NOVELTY-TYPICALITY ANALYSIS 39 Chapter 3: Analysis conclusions 3.1 CHANGE OF INTERACTION THROUGH THE YEARS 44 3.2 NOVELTY-TYPICALITY ASPECTS 45 3.3 INTERACTION ANALYSIS 45 Chapter 4: Conceptualization 4.1 SOLUTIONS 48 4.2 CONCEPT 51 4.3 REASONING 55 4.4 NOVELTY-TYPICALITY 56 4.5 PRODUCT IMPACT TOOL OF NEW CONCEPT 58 Chapter 5: Conclusion 5.1 ANSWERING THE RESEARCH QUESTION 59 5.2 DISCUSSION 60 Industrial Design Engineering Challenges Minor Module 2016-2017 2 Introduction The technology of the photocamera has been In this project we tried to find out if taking a look around for some time now. It started out very simple. at the development of technologies in this field over time One of the first consumer cameras was a plain box helps the design process of a new camera. It may provide with a hole in it. From there it all went very fast. New a logical next step in the line of photocameras through technologies were invented and applied to existing history. It should also be attractive to its potential users. photography devices. They became smaller and cheaper To achieve this we used the theory of Novelty-Typicality. and incorporated more and more features. After the This states that a design is attractive for users if it is novel discovery of digital photography the development of and innovative, but it also should provide recognizable new versions of the standard amateur photocamera has aspects as well to be sure that it is comfortable to use.
    [Show full text]
  • 1. Specifications Type of Camera the Camera «START» Is Portable 35-Mm Film Camera Having All Advantages of Modem Cameras
    Start Instruction manual Start Instruction manual. Before using the camera, study the manipulation and operating procedure with it under the given description. In order to prevent damage of the camera you must install the shutter speed only after cocking the shutter. REMEMBER, that rotation of a shutter speed dial 10 (fig. 2) with non-cocked shutter results in breakage of the device! The small divergence between the description and your camera are possible owing to technical development of a design of the camera. 1. Specifications Type of camera The camera «START» is portable 35-mm film camera having all advantages of modem cameras. The camera «START» is the high class single reflex lens (SLR) camera with the mirror, which allows to see the image is direct, instead of reflected or revolved. Camera is intended for the most various photoshootings and can satisfy to the high requirements showed to the camera by qualified photofans. It is suitable also for many kinds of reporting and scientific works. Picture format 24 mm × 36 mm. The camera is designed for application of the standard 35 mm film format. Loading in the cassette 1.6 m of a film provides shooting 36 frames. The camera is adapted to work with two cassettes similar with cartridges from the Soviet RF camera «Kiev». Also can be used usual 135 type film cassette and take-up spool. Shutter Original focal-plane shutter with a horizontal-travel curtains is applied in the camera «START». Shutter speeds It provides an automatic shutter speeds 1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/125, 1/250, 1/500 and 1/1000 seconds, and also «B» by hand and long exposure.
    [Show full text]
  • WAX-GG in 5 Easy Steps by Daniel Schweinert E-Mail: [email protected]
    15.10.2006 WAX-GG in 5 easy steps by Daniel Schweinert e-mail: [email protected] Material: Microscopic Slides – 76 mm x 26 mm x 1 mm (cut to 38 x 26 mm) Hard Paraffin Wax - 95 gramm (Paraffinum durum, Paraffinum solidum) White Bees Wax – 5 gramm (Cera alba) Jar Some clothespins Metal box Tape - 0.05mm thick (Scotch 3M or other tape between 0.05 – 0.10mm) Oven with “circulating air” 1. Turn on your oven and use “circulating air” at 100°C. Fill the jar with 95 gramm of hard paraffin wax and 5 gramm of white bees wax and put it together with the metal box into the oven. Close the oven and let the wax melt. (15-20 minutes) 15.10.2006 2. Prepare the microscopic slides. Clean the slides carefully with glass cleaner. Cut some tape strips (i used 2 for each side) and put it on the edges of the first slide. Place the other slide over it to create a sandwich with a gap of 0.10 mm. Fix the glass-sandwich with 4 clothespins (its better to use wooden ones because of the high temperature). 3. Warm Up the glass-sandwich! Now the wax should have melted. Fill it into the metal box and adjust the oven down to 70°C. Put the glass-sandwich into the oven beside the metal box to warm-up for 7 minutes. (this is very important otherwise the capillary action will not work properly if the glass-sandwich is not heated up) 15.10.2006 4.
    [Show full text]
  • Haiou, China. Ibn-El-Haitam, Halina, UK. Hall, Subsidiary
    Haiou, China. This seems to be one of the few Chinese lenses with a name to classify; Haiou f2.0 58mm on Seagull, a copy of the Minolta. Ibn-el-Haitam, The list does not normally include pre-photographic lens data but one reader insisted el-Haitam must be included as the first known man to calculate mathematically the design and behaviour of light in a lens. He lived about year1000 ie 1000 years ago by current reckoning. Halina, UK. Agents and importers of photographic equipment with their name on it. Haking Industries of Hong Kong are or were one of the biggest camera makers and Halina was the brand name. In 1978, the B.J.P. 07/07/1978 p587 says most were low price 110 cameras for sale as Halina and under many other names. Also the Halina 700B for 35mm with f2.8/40mm lens and 110 Halina with f5.6/24mm were noted. Halina f3.5 80mm on Halina TLR (c.1952) Halina Anastigmat f2.8 40mm in 04/1972 on a Halina 500 pocket size 35mm. Halina Anastigmat f3.5 45mm on Halina 35X. Fig 022 018 Halina Anastigmat f3.5/45mm on Halina camera. There is some sort of tradition that the glasses for some Hong Kong cameras were ground in Wales by Chance and sent to Hong Kong to be assembled. But this is certainly not proven. Hall, subsidiary of A.G.I., Croydon, UK. Unimar f4.5 105mm on A.R.L.Mk11. (1945 approx.) Hall were lens makers before they amalgamated with A.G.I.
    [Show full text]
  • Cambridge University Press 978-1-316-63993-1 — Digital SLR Astrophotography Michael A
    Cambridge University Press 978-1-316-63993-1 — Digital SLR Astrophotography Michael A. Covington Index More Information Index à trous wavelet transform, 40 asteroids, 249–250, 329–330 AAVSO, 325 Astro Pixel Processor, 14 aberrations, 57, 103, 113 astrocameras, 7–9 chromatic, 103, 113, 124, 137 Astrometry.net, 323–324 ACF telescopes, 89 Astronomik UHC, 314 adaptive homogeneity-directed (AHD) Astrophysics Data System, 330 deBayerization, 203 Astrotracer, 11, 12–13 ADM accessories, 147 atmospheric refraction, 157 Adobe Photoshop, see Photoshop aurora borealis, 71 Adorama, 14 auto rotate, 47 afocal coupling, 9, 95, 96 autofocus, 44 AHD deBayerization, 203 autoguiders, 164 Aladin, 320 algorithms, 171 alignment calibration, 170 images, 206 cameras, 166 telescope mounts, 149–152 communication with mount, 165 All-Star Polar Alignment, 151 guidescopes, 166–167 alpha channel, 23 guiding graph interpretation, 172 altazimuth mounts, 139, 140 guiding quality, 171 amateur vs. professional periodic error correction and, 174 astrophotography, settings, 281 19–20 software, 164 amp glow, 287 subpixel accuracy, 164 ampere-hours, 183 AutoStakkert, 263, 268 amperes, 183, 185 analog-to-digital converter (ADC), 291 B&H, 14 Andromeda Galaxy (M31), 3, 4 backlash, 161 aperture, 16, 101 BackyardEOS, 190 aperture photometry, 326–327 BackyardNIKON, 190, 264 ASCOM platform, 165 Bahtinov mask, 58 aspect ratio, 48 Barlow lenses, 96, 97 star images, 176 barn-door tracker, 142 339 © in this web service Cambridge University Press www.cambridge.org Cambridge University Press
    [Show full text]