13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:00 PM Page 1

owners..com 2013 2013 Acura TL Technology/Advance Package Technology/Advance Package 31TK4B40 Advanced Technology Guide ADVANCED TECHNOLOGY GUIDE 00X31-TK4-B400 ©2012 Motor Co., Ltd. — All Rights Reserved Printed in U.S.A. 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:00 PM Page 2

BLUETOOTH ® ADVANCED TECHNOLOGY GUIDE p. 26 HANDSFREELINK® p. 22 A U D I O The Advanced Technology Guide is designed to help you get MULTI-INFORMATION acquainted with your new Acura and provide basic instructions DISPLAY p. 6

on technology and convenience features. This guide covers

the TL with Technology and Advance Packages.

This guide is not intended to be a substitute for the Owner’s

Manual. For more detailed information on vehicle controls and

operation, please refer to the respective sections in the

Owner’s Manual or Navigation Manual.

KEYLESS ACCESS SYSTEM p. 2

VOICE NAVIGATION p. 18 RECOGNITION p. 14

Technology Package shown

Keyless Access System...... 2 Bluetooth® HandsFreeLink® (HFL)...... 22 Instrument Panel Indicators...... 4 Bluetooth® Audio...... 26 Multi-Information Display (MID) ...... 6 Hard Disc Drive (HDD) Audio ...... 27 Driving Position Memory System (DPMS)...... 10 iPod® or USB Flash Drive ...... 28 Rearview Camera...... 10 Song By VoiceTM (SBV)...... 29 Reverse Tilt Door Mirrors ...... 11 AcuraLink® Messages...... 31 Blind Spot Information (BSI) System*...... 12 My Acura...... 32 HomeLink® ...... 13 Safety Reminder ...... 33 Voice Recognition ...... 14 Fuel Requirement ...... 33

Navigation ...... 18 *if equipped 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:00 PM Page 3

KEYLESS ACCESS SYSTEM Operate certain functions of your vehicle by simply having the remote within operating range. Unlocking the Doors Engine Start/Stop Button Accessory or On Mode Grab either one of the front door Use audio, power sockets, etc., without turning the engine on. handles. Press the ENGINE START/STOP button once (without pressing the brake pedal). Press it again for On mode.

Locking the Doors Starting the Engine Press and hold the brake pedal*, Press the door lock button on then press the ENGINE either front door handle. START/STOP button.

* For manual transmissions, press and hold the clutch.

Turning the Vehicle Off Opening the Trunk Shift to Park*, then press the ENGINE START/STOP button. Press the trunk release button under the spoiler.

Note:If you press the button and the shift lever is not in Park, the vehicle goes into Accessory mode. * For manual transmissions, apply the emergency brake.

2 3 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:00 PM Page 4

INSTRUMENT PANEL INDICATORS Briefly appear with each engine start. Red and amber indicators are most critical. Blue and green indicators are used for general information. See your Owner’s Manual for more information.

Malfunction Indicators Condition Indicators If an indicator remains on, there may be a problem; see your dealer. Action is needed by driver.

Charging system SH-AWD** on: Message indicator: (Super Handling All-Wheel Drive) Release See MID Seat belt reminder: Low fuel: Low brake fluid, Brake system Malfunction indicator lamp (check engine light) Fasten seat belt(s) Refill

® Door/trunk open: Low tire pressure (stays on): Low oil pressure VSA (Vehicle Stability Assist) Close door or trunk Add air Immobilizer (blinks): SRS TPMS (blinks) Use correct key (Supplemental Restraint System) (Tire Pressure Monitoring System)

EPS ABS (Anti-lock Brake System) (Electronic Power Steering System) On/Off Indicators BSI* Keyless Access System PASSENGER (Blind Spot Information System) PASSENGER AIRBAG OFF OFF Fog lights on (above audio panel) *if equipped SIDE AIRBAG OFF Headlights on

VSA OFF Turn signals/hazards on

CRUISE MAIN on High beams on

CRUISE CONTROL on

4 5 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:00 PM Page 5

MULTI-INFORMATION DISPLAY (MID) Consists of several displays that provide you with useful information. Accessing the MID Main Displays

Odometer, Average and instant trip meter fuel economy Range

SH-AWD torque

distribution monitor* Average speed Elapsed time

AVG. SPEED

When you start the engine, the MID mph shows the last active display from the previous drive cycle.

Tire pressure monitor Customize settings

CUSTOMIZE SETTINGS

* if equipped

Lower Displays Odometer, Trip A, Outside temperature Outside temperature

To toggle between the MID main displays, press either Info SEL/RESET button button ( p/q). To toggle between the lower displays, press SEL/RESET. Oil life, Trip B, Outside temperature Outside temperature INFO button

6 7 6 7 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:00 PM Page 6

Customizing Settings Using the MID Tire Pressure Monitoring System Five groups of settings can be programmed using the MID*: Meter Setup, Position Alerts you when one or more of your tires has significantly low pressure. Toggle Setup, Keyless Access Setup, Lighting Setup, and Door Setup. to the tire pressure monitor display to view pressure readings on the MID. Programming the Auto Door Unlock Setting How It Works

Press either Info button to toggle to the “Customize Settings” display, then press SEL/RESET to enter the menu.

SEL/RESET button

Info buttons If the tire pressure drops significantly below recommended levels: • The low tire pressure indicator comes on. • A “CHECK TIRE PRESSURE” message appears on the MID, showing which tire(s) have low pressure. 1. Select CHANGE SETTINGS. 4. Select ALL DOORS With SHIFT TO P.

2. Select DOOR SETUP. 5. Once the setting has been W h a t t o D o saved, select EXIT. 1. Visually inspect the tires for damage. 2. Use a tire air pressure gauge (or check the MID) to check which tire(s) have low pressure.

3. Select AUTO DOOR UNLOCK.

3. Inflate the tire(s), if necessary, to the recommended pressures listed on the label on the driver’s doorjamb.

* See “Customize Settings” in your Owner’s Manual for other programmable settings.

8 9 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:00 PM Page 7

DRIVING POSITION MEMORY SYSTEM (DPMS) REVERSE TILT DOOR MIRRORS Store driver’s seat and side mirror positions into memory for each corresponding When you shift into Reverse (R), you can tilt either outside door mirror down slightly to keyless remote (1 or 2), which are recalled when you unlock the driver’s door with the improve your view as you parallel park. Shifting out of Reverse returns the tilted mirror remote and enter the vehicle. to its original position. Programming the DPMS How It Works

1. Turn the vehicle on. Shift into 3. Press SET. You will hear a Park (P), or set the parking brake beep. for manual vehicles.

2. Adjust your preferred seat and 4. Press the memory button outside mirror settings. corresponding to the remote (1 or 2) you are using. You will • To tilt the driver’s hear two beeps. door mirror, move the mirror selector switch to the left (L) position. • To tilt the passenger’s side door mirror, move the mirror selector switch to the right (R) position. Note: Stored positions can also be recalled by pressing one of the • To turn the feature memory buttons (1 or 2) on the door. off, move the switch to the middle position. REARVIEW CAMERA For added convenience, the area behind your vehicle is displayed to help you navigate while backing up. How It Works • When you shift into Reverse, a real-time image of the area behind your vehicle is shown in the navigation display. • Yellow parking guidelines appear to help you judge distance. • Adjust the screen brightness by turning the Interface Dial. • The display turns off when you shift out of Reverse.

10 11 9 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 8

BLIND SPOT INFORMATION (BSI) SYSTEM (Advance Package) H O M E L I N K ® Assists you in determining if there are vehicles in your blind spots. Program your vehicle to operate up to three remote-controlled devices around your home, such as garage doors, lighting, or home security systems. How It Works A radar sensor on each corner of the rear bumper alerts you to a detected Training a Button vehicle in your blind spot.

Minimum operating speed: 6-7 mph

When a vehicle is detected in your blind spot, the blind spot indicator turns on and stays lit until the area is clear. Position the remote transmitter you Press and hold the programmed 1 3 HomeLink button for about a wish to link 1–3 inches from the second. HomeLink button you want to program. Does the device (garage door opener) work?

NO YES 2 Press and hold the desired HomeLink button and the button on 4 Press and hold Training the remote transmitter. the HomeLink complete Does the HomeLink indicator (LED) blink at a button again. faster rate after about 10 seconds?

When your turn signal is on and a NO YES HomeLink indicator HomeLink LED vehicle is detected, the blind spot flashes for 2 seconds, remains on. indicator blinks until the area is then remains on. clear or the turn signal is turned off. a Press and hold the button on the remote and the HomeLink button at a The remote has a rolling code. the same time. Then, while Press the “learn” button on the continuing to hold the HomeLink remote-controlled device (e.g., button, press and release the button garage door opener). on the remote every 2 seconds. Does the LED blink at a faster rate within 20 seconds? Left BSI indicator shown b Within 30 seconds, press and hold the programmed HomeLink NO YES button for 2 seconds.

Turning BSI Off/On 5 Press the programmed HomeLink button again; the remote-controlled Press and hold device should operate. the BSI OFF button on the dashboard to If you have any problems programming HomeLink, see the owner’s manual turn BSI off or on. included with the device you are trying to program, call HomeLink at (800) 355-3515, or visit www.homelink.com. A message briefly appears on the MID screen showing the system status.

12 13 28 29 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 9

VOICE RECOGNITION To keep your eyes on the road and hands on the wheel, use voice commands for hands-free calling, navigation, audio, climate control, and AcuraLink functions. For a full list of commands, say “Display information” and “Voice Info.” Key Functions Operational by Voice Command Control five different systems with the steering wheel buttons and the ceiling microphone. NAVIGATION p. 18

BLUETOOTH ®HANDSFREELINK® p. 22

Pick-Up button: Answer an incoming call, or go directly to the Cellular Phone screen. Hang-Up button: End a call or decline a ACURALINK p. 31 call. Talk button: Give HFL, navigation, audio, climate control, or AcuraLink commands. Back button: Cancel a command and return to the previous screen.

AUDIO p. 17 Voice Command Tips

• To hear a list of available commands at any time, press and release the Talk button, then say “Help.” • When using the Talk button, wait for a beep, then say a command. • When the Talk button is pressed, all available voice commands are highlighted in blue. p. 17 • Speak in a clear, natural voice without pausing between words. CLIMATE • Reduce all background noise. • Adjust the dashboard and side vents away from the microphone in the ceiling. • Close the windows.

14 15 12 13 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 10

Commonly Used Voice Commands Here are some examples of commonly used voice commands. Try some of these to familiarize yourself with the voice command system.

Press and release the Talk button before you say a command. Press and release the Talk button before you say a command.

General Commands (Accepted on most screens to change displays) Audio Commands (Accepted on most screens)

• Radio on • CD play • Display map • Display audio • Radio # FM/AM • CD play track # • Display menu screen • Radio preset • CD skip • Display • What time is it? 1/2/3/4/5/6 forward/back Information • XM channel # • iPod/USB/HDD • XM preset play 1/2/3/4/5/6

Find Place Commands (Accepted on Map screen) Climate Control Commands (Accepted on most screens)

• Find nearest: • Air conditioner • Fan speed - ATM - bank on/off up/down - gas station - Acura dealer • Rear defrost on/off • Temperature # - Mexican - airport • Climate control degrees (# = 57–87) restaurant - hospital recirculate/fresh • Temperature max - post office air hot/cold

Display Commands (Accepted on Map screen) Setup Commands (Accepted on Setup screen)

• Display (or hide): • Display north up/ - ATM heading up • Brightness • Interface dial - gas station • Zoom in/out up/down feedback on/off - restaurant • Go home • Volume up/down/ - post office • Display current min/max/off location

Navigation Commands (Accepted on Map screen after a destination is entered) Traffic Commands * (Accepted on Map screen)

• How long/far to the destination? • Display traffic • Display traffic icons • Display destination • Display traffic • Display traffic • Display entire route speeds incidents/list

Help Commands (Accepted on most screens) Weather Commands * (Accepted on map screen)

• Help (list of available commands for current screen) • Display weather • Display weather • Voice info (from the INFO screen - list of • Display weather warning icons all available navigation, audio, and icons climate control commands)

*subscription required

16 17 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 11

NAVIGATION Real-time navigation system uses GPS and a map database to show your current location and help guide you to a desired destination. Entering a Destination Using Voice Commands Set a destination using a street address. For other destination options, see your Navigation Manual. Using the “Find Nearest” Command Find a nearby point of interest, such as a gas station, movie theater, restaurant, etc. Press and release the Talk button before you say a command. Press and release the Talk button before you say a command. 1. Say “Display menu” and 4. Say the entire street address “Address.” number. For example, “1-2-3-4.” 1. From the map screen, say 3. Say the number next to the “Find nearest ATM.” destination you want to select.

2. A list of the nearest ATMs in 4. The system calculates the your area is displayed by route and displays the 2. Say “Street,” then say the 5. If the street address is in shortest distance to “Calculate route to” screen. street name on the next more than one city, a list of destination. Say “OK” to set the route. screen. Do not include the city names appears. Say direction (N, S, E, W) or type the number next to the city (St., Ave., Blvd., etc.). you want.

3. A list of street names appears. 6. The system calculates the M a p S c r e e n Say the number next to the route and displays the street you want. “Calculate route to” screen. L e g e n d Say “OK” to set the route.

Calculated route

Direction of destination

Distance to go

Time to go

Current vehicle location

18 19 18 19 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 12

ACURALINK REAL-TIME TRAFFIC TM * (if equipped) ACURALINK REAL-TIME WEATHER TM * (if equipped) Provides continuously updated info, including traffic speed, incidents, and Provides continuously updated weather conditions, warnings, and forecasts in construction in major metro areas. major metro areas.

Press and release the Talk button before you say a command. Press and release the Talk button before you say a command. Displaying Traffic Information Displaying Weather Icons Say “Display traffic” to view highway flow data. Say “Display weather” to view weather icons for each city.

Traffic Weather Icons Flow data Clear Fog Incident icon Partly Rain Cloudy

Heavy traffic Incident Icons Cloudy Snow Road Note: Weather icons are Moderate traffic Incident closed available on all map scales. Free-flow traffic Congestion Weather Displaying Weather Information Note: Traffic flow and incident Say “Information,” then “Weather information” for the following options: icons are displayed on map scales of 5 miles (8 km) or less. Construction Weather Forecast Radar Image Map Say “Weather forecast” to view a Say “Radar map” to view color- Traffic Rerouting TM 1-day or 3-day forecast of your coded rain or snow systems. When a destination is already set, you can create a detour to avoid traffic current position or city vicinity. incidents or congestion (if Traffic Rerouting is set to ON in Setup). 1. Say “Display traffic list” to 3. Say “Avoid” and the view a list of incidents on incident list returns. your route.

Weather Warning List Weather Warning Map Say “Warning list sorted by distance” Say “Warning map” to view color- to view a list of all U.S. weather coded severe weather systems. 2. Say the number of the incident 4. Say “Reroute” to set the warnings by distance. you want to avoid. When the new route. incident appears, say “Traffic detail.”

* Subscription-based service through Sirius XM Radio® (free 90-day trial upon vehicle purchase) * Subscription-based service through Sirius XM Radio® (free 90-day trial upon vehicle purchase)

20 21 20 21 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 13

BLUETOOTH ® HANDSFREELINK® Place and receive phone calls through your vehicle’s navigation(HFL) and audio systems. Visit www.acura.com/handsfreelink to check if your phone is compatible. How to Use HFL Use this pairing method when a phone has already been paired to the system, or when you want to pair an additional phone. Pick-Up button: Answer an incoming call, or go directly to the Cellular Phone screen. Press and release the Talk button before you say a command. Hang-Up button: End a call or decline an incoming call. 1. Press the Pick-Up button to 5. Make sure your phone is in Talk button: Give HFL commands. go to the Phone screen. discovery mode, and say “OK.” Back button: Cancel a command and return to the previous screen.

Pairing Your Phone If a prompt appears asking 6. HFL searches for your phone. Say to connect to a phone, say the number next to the phone Use this pairing method when no phone has ever been paired to the system. “No.” when it appears on the list. You can pair your compatible phone only when the vehicle is stopped. 2. Say “Phone setup.” Press and release the Talk button before you say a command.

1. Press the Pick-Up button to go If your phone does not to the Phone screen. A prompt appear: appears. Say “Yes.” Select “Phone Not Found?” If your phone does not appear: and search for a Say “Find Another Phone” and HandsFreeLink device from 3. Say “Connection.” your phone. Connect to HFL. search for HandsFreeLink from your phone. Connect to HFL.

2. Make sure your phone is in discovery mode, and say “OK.” 4. Say “Add New Phone.” 4. HFL gives you a four-digit code. Enter it on your 7. HFL gives you a four-digit phone when prompted. The code. Enter it on your phone phone is now paired. when prompted. The phone is now paired. 3. HFL searches for your phone. Say the number next to the phone when it appears on the list.

22 23 22 23 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 14

Making a Call Dialing a Number Using Speed Dial and Voice Tags Press and release the Talk button before you say a command. Press and release the Talk button before you say a command.

1. Press the Pick-Up button to 3. Say the entire phone 1. Press the Pick-Up button to go If an entry has a stored voice go to the Cellular Phone number and “Dial” to to the Cellular Phone screen. tag, say “Dial by voice tag,” screen. begin call. followed by the voice tag name and “Dial” from any screen.

2. Say the number next to one of the first four entries. For 2. Say “Dial.” 4. The call is connected and 3. The call is connected and heard through the speakers. example, “One.” For the complete list of speed dial heard through the entries, say “More speed dial.” speakers.

Note: See your Owner’s Manual for instructions on storing speed dial entries and accompanying voice tags. Using the Imported Phonebook * Press and release the Talk button before you say a command. 1. Press the Pick-Up button to 3. Scroll the list to find the go to the Cellular Phone name and number you screen. want to call. Receiving a Call When you receive an incoming call, you hear a notification and see the following pop-up message:

2. Say “Phonebook.” 4. Say the number of the entry to begin the call.

Press the Pick-Up button to Press the Hang-Up button accept the call. to end or decline the call.

* Visit www.acura.com/handsfreelink to check if this feature is available on your phone.

24 25 24 25 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 15

BLUETOOTH ® AUDIO HARD DISC DRIVE (HDD) AUDIO Play audio files from your compatible phone through your vehicle’s audio system. Visit Automatically record CDs onto your vehicle’s hard drive (by system default). Songs www.acura.com/handsfreelink to check if this feature is available on your phone. begin to record once a CD is inserted into the disc slot. P l a y i n g Bluetooth A u d i o Playing HDD Audio

1. Make sure your phone is on and 4. Press (9)(:) or (+)(-) to 1. Press HDD/AUX until HDD appears. 2. The first song of the last paired to Bluetooth® HandsFreeLink® change tracks. recorded album or the last (see page 22). song selected plays. Press (9)(:) or (+)(-) to change tracks. 2. Press HDD/AUX until Bluetooth Audio appears.

3. Press “play” on your phone; sound is redirected to the audio system. Make sure the volume on your phone is properly adjusted.

Notes: • You may need to enable additional Bluetooth settings on your phone for playback. Searching for Music • The play/pause function and remote audio controls may not be supported on all phones. 1. Press AUDIO. 3. Select one of the categories. • Operate your phone only when your vehicle is stopped.

2. Push the selector up to select 4. Select a track and press MUSIC SEARCH. ENTER to begin play.

26 27 26 27 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 16

iPod®* or USB FLASH DRIVE SONG BY VOICE TM (SBV) Play audio files from your compatible iPod or USB flash drive through your vehicle’s Play songs from your iPod and HDD from most navigation/audio screens by using audio system. See your Owner’s Manual for a list of compatible devices. simple voice commands. Connecting and Playing Audio Playing Audio Files Using Voice Commands 1. Open the center console, and 9 : 3. Press ( )( ) or (+)(-) to change Press and release the Talk button before you say a command. pull out the USB adapter cable. tracks. Using the “Play” Command Say “iPod search” or “HDD search.”

Connect the USB connector to your Say “Play” iPod dock connector or flash drive. and one of the options on 2. Press HDD/AUX until iPod or USB the Search appears. Mode screen. For example, say “Play Artist XYZ.” if exact if exact match match found not found

The system provides voice feedback and lists possible matches. Note: Operate your phone only when your vehicle is stopped.

*iPod is a registered trademark of Apple Computer, Inc., registered in the U.S. and other countries. iPod not included. Say the number of the corresponding selection you wish to play. For example, say “Four.”

The system plays the selection and returns to the Search Mode screen.

28 29 28 29 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 17

A C U R A L I N K® M E S S A G E S Acura periodically sends you messages on vehicle features, recall and safety Playing Audio Files Using Voice Commands (continued) information, maintenance reminders, and diagnostic information.

Press and release the Talk button before you say a command. Viewing New Messages

Using the “List” Command Press and release the Talk button before you say a command. 1. When you receive a new 3. Say the number of the Say “iPod search” message, an envelope icon message you want to hear. or “HDD search.” appears on the map screen.

Say “List” and one of the options on the 2. Say “Messages,” and a list Search Mode of messages appears. screen. For example, say “List Artist XYZ.” if exact if exact match match found not found

A list of tracks The system from the provides selected artist voice displays. feedback Scheduling a Dealer Appointment and lists To use this feature, you must register at My Acura (www.myacura.com), and possible make sure your compatible phone is paired and correctly set up (see page 22). matches. 1. Using the Interface Dial, open 3. The system searches for the next a maintenance or product available appointment at your dealer. Say the update message. Select Confirm Appointment if you are number of satisfied with the date. the artist. For Note: If you are not satisfied with the example, available date, use the Call option to call say “Four.” your dealer directly. Say the number of your selection. For example, 2. Select Schedule Dealer say “One.” Appt.

4. Select OK to set the appointment. The system plays the selection and returns to the Search Mode screen.

30 31 28 29 13 TL ATG_Tech_ATG_NEW STYLE 8/14/2012 2:01 PM Page 18

WWW.MYACURA.COM REGISTER AT SAFETY REMINDER My Acura enhances your ownership experience by allowing you to explore features Your vehicle is equipped with . Airbags do not replace seat belts; they add to and technologies specific to your vehicle, schedule service appointments, obtain the protection offered by seat belts. Airbags can help protect you in some types of and update maintenance and service records, manage your financial services collisions, but they do not provide protection in all collisions. account, and access other useful information. Always make sure you and your passengers wear seat belts, and that young children are properly secured in a child seat or booster in the rear seat. Never place an infant seat in the front passenger’s seat, as the force of a deploying airbag can seriously injure an infant. FUEL REQUIREMENT • Only use unleaded gasoline of 91 octane or higher. • Some gasoline in North America contains MMT, a manganese-based fuel additive. Prolonged and consistent use of gasoline containing MMT can deteriorate your vehicle’s performance, fuel economy, and the emission control system. Always use MMT-free gasoline if available. Failures caused by use of gasoline containing MMT may not be covered under warranty. • “TOP TIER Detergent Gasoline” meets a new gasoline standard jointly established by leading automotive manufacturers to meet the needs of today's advanced engines. In most cases, qualifying gasoline retailers will identify their gasoline as having met “TOP TIER Detergent Gasoline” standards at the retail location. This fuel is guaranteed to contain the proper level of detergent additives and be free of metallic additives. This helps avoid build-up of deposits in your engine and emission control system. Because the level of detergency and harmful metallic additives (such as MMT) in gasoline vary in the market, Acura endorses the use of “TOP TIER Detergent Gasoline” where available to help maintain the performance and reliability of your vehicle. For more information, visit www.toptiergas.com. • For further important information on fuel and lubricants for your car and information on gasoline that does not contain MMT, contact your dealer or visit My Acura at www.myacura.com.

32 33