Sub-Field:Footwear and Leather Trades

8116 version 4 8-Jun-18 1 of 3

LEATHER - BOTTOM STOCK, MAKING AND LASTING Attach steel toe caps to industrial footwear

level: 2 credit: 3 planned review date: November 2005 sub-field: Footwear and Leather Trades purpose: People credited with this unit standard are able to check components prior to attaching steel toe caps, and attach steel toe cap to industrial footwear and apply comfort strip. entry information: Open. accreditation option: Evaluation of documentation by NZQA and industry. moderation option: A centrally established and directed national moderation system has been set up by Competenz. special notes: 1 Specified industry performance is 55% BSI performance or equivalent. BSI Performance is the British Standards Institute internationally recognised performance system (BS3138) where 100% is the standard expected from a competent fully qualified performer using the correct methods and taking the allowed rest. Other comparable rating or performance systems such as the 60/80 system are acceptable, with the appropriate performance adjustment.

2 Company safety requirements must conform to the Health and Safety in Employment Act 1992 and Health and Safety in Employment Regulations 1995.

Elements and Performance Criteria 8116 version 4 8-Jun-18 2 of 3

element 1

Check components prior to attaching steel toe caps. performance criteria

1.1 Received toe caps are checked against, and match, work ticket requirements and/or company standard.

Range: size, style, number, not distorted, no rust, no sharp edges.

1.2 Uppers are checked against, and match, work ticket requirements and/or company standards.

Range: unlasted – size, style, number; lasted upper lining – size, style, number, flat bottom, smooth lining.

1.3 Comfort strips are checked against, and match work ticket requirements and/or company standard.

Range: size, type, not distorted. element 2

Attach steel toe cap to industrial footwear and apply comfort strip. performance criteria

2.1 Work is completed to specified industry performance standard.

2.2 Work is completed to company quality standard.

Range: toe cap tight on last, insole without creases, comfort strip even to edge of cap, comfort strip firmly trapped and/or stuck down.

2.3 Documentation is completed to company requirements and practice.

2.4 Work practices meet company safety requirements. 8116 version 4 8-Jun-18 3 of 3

Comments on this unit standard

Please contact Competenz [email protected] if you wish to suggest changes to the content of this unit standard.

Please Note Providers must be accredited by the Qualifications Authority or a delegated inter- institutional body before they can register credits from assessment against unit standards or deliver courses of study leading to that assessment.

Industry Training Organisations must be accredited by the Qualifications Authority before they can register credits from assessment against unit standards.

Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards.

Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for providers wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

This unit standard is covered by AMAP 0030 which can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.