Required Special Inspections and Testing

Required Special Inspections and Testing Identification of Seismic-Force-Resisting Systems 1. Soils and Wind-Force-Resisting Systems A. Foundation Bearing Y / N B. Slab Sub-base Y / N The Registered Professional in Responsible Charge shall check off C. Exterior Fill Y / N each of the systems or components included in the contract 2. Special Foundations documents prior to issuing this form to the Contractor. A. Pile Foundations (including mini-piles) Y / N Seismic-Force-Resisting Systems : Pier Foundations (including augered caissons) Y / N B. The Seismic Design Category (SDC) is /B/C/D/E/F. 3. Concrete There /arenot seismic-force-resisting systems. Cast-In-Place Footings, Foundation Walls1, Foundation There /are not designated seismic systems. A. Y / N Piers Additional items for SDC C, D, E or F: B. Cast-In-Place Slabs-on-Grade and Slabs on Metal Deck Y / N HVAC ducts with hazardous materials. C. Cast-In-Place Beams, Columns, Structural Slabs, Walls Y / N D. Post-Tensioned Cast-In-Place Elements Y / N Piping / mechanical units w/ flammable, combustible or highly toxic materials. E. Precast Structural Elements Y / N Electrical equipment used for emergency or standby power systems. 4. Masonry A. Nonessential Facilities (Level 1 Inspection) Y / N Additional items for SDC D, E or F.: B. Essential Facilities (Level 2 Inspection) Y / N Exterior wall panels. 5. Metals Suspended ceiling systems. A. Structural Steel Y / N B. Open-Web Steel Joists Y / N Access floors. C. Metal Decking Y / N Steel storage racks. 6. Wood A. Structural Studs, Joists, Rafters, Columns, Shear Walls Y / N Additional item for SDC E or F: B. Engineered Wood Components Y / N Electrical equipment. 7. Sprayed Fire-Resistant Materials Y / N 8. Mastic and Intumescent Fire-resistant Coatings Y / N Wind-Force-Resisting Systems : 9. Exterior Insulation and Finish Systems (EIFS) Y / N Wind Cat B, wind speed min 120MPH. 10. Smoke Control Y / N 11. Fabricated Systems Y / N Wind Cat C or D, wind speed min 110MPH. 12. Special Cases A. Seismic-Force-Resisting Y / N Design includes wind-force-resisting systems and components: B. Wind-Force-Resisting Y / N Roof cladding, framing connections. Wall /roof / floor connections and framing.

Roof and floor diaphragm systems.

Vertical systems, braced or moment frames, shear walls.

Connections to foundation.

Impact resistant items.