Kraft Paper Bags Beaverton

Total Page:16

File Type:pdf, Size:1020Kb

Kraft Paper Bags Beaverton Kraft Paper Bags Beaverton Plant Capabilities to Meet Your Unique Packaging Needs Buena Park Diverse Product Line - Our bags are made from kraft or white paper Grand Prairie International Paper and are custom printed to fit your needs. We offer: handle sacks, carry Company Overview sacks, small bags and merchandise bags, all of which come in a range of • Global producer of renewable sizes with each style. fiber-based paper and packaging • 119+ years in business Printing Capabilities - Our network of facilities provides a variety • 52,000 employees worldwide of printing and manufacturing options, which allows us to create graphics • Manufacturing operations in: to enhance your marketing efforts. - North America - Europe - Latin America Strategic and Cost-Effective Solutions for Your Business - Russia The Right Relationship - Our account managers work with your team - India - North Africa to provide you with customized solutions based on your needs. Top-Notch Training - We offer targeted training programs for front-end International Paper stands firmly behind personnel and hands-on assistance. our commitment to the brown bag, green globe equation and to making even greater Valuable Expertise and Research - With more than 56 years of strides toward a more sustainable world. Kraft bag experience, International Paper is a market leader To learn more about our commitment and in quality and service. We offer our customers highly beneficial our actions, along with important facts front-end strategies that target solutions for enhanced about what makes packaging sustainable, customer service and reduced costs. visit www.brownbaggreenglobe.com. Kraft Paper Bag Plants Our Commitment to Sustainability California Kraft paper bags are the natural choice because they are: 6485 Descanso Ave. Renewable • Compostable • Recyclable • Reusable Buena Park, CA 90620 (714) 523-3330 (714) 739-2461 fax Oregon 5800 S.W. Western Ave. Beaverton, OR 97005 (503) 641-4455 (503) 671-9137 fax ® Texas 1302 W. North Carrier Pkwy. Grand Prairie, TX 75050 (972) 641-2972 (972) 660-8790 fax Kraft Paper Bags Business Overview ©2019 International Paper Company. All rights reserved. ”Brown bag, green globe.” is a registered trademark of International Paper Company..
Recommended publications
  • Cardboard and Brown Paper Bags Office Paper, Newspaper, Junk Mail, Magazines, and Catalogs
    Recycling Center 801 Diamond Valley Drive Open: Daily to the public during daylight hours This guide will help you properly prepare your recyclable materials for drop-off at the Town of Windsor Recycle Center. This is a drop-off facility. It does not have a buy-back option and is for use by residents and small businesses. Following this information will help maintain the facility and the recycling program for the benefit of the community. IMPORTANT… • Do not leave your recyclables in plastic bags. Plastic bags are NOT recyclable! • The plastic item must be a BOTTLE or JAR. with a #1 or #2 on the bottom. • 99 percent of these will have a screw-on plastic lid (which isn’t recyclable). • Plastic containers with a #3 - #7 on the bottom are NOT acceptable. • Tubs, buckets, deli plates, microwave/fast food trays, wrappers, Styrofoam, toys, patio furniture, etc. are NOT acceptable. • Plastic bottles larger than 2.5 gallons are NOT acceptable. • Syringes and other medical supplies are NOT acceptable. Cardboard and Brown Paper Bags Corrugated cardboard is easy to recognize. It is made of paper and has an arched layer called “fluting” between smooth sheets called “liners”. The drop-off site has two 40-yard hydraulic compactor units for collecting corrugated cardboard and brown paper bags. The compaction system is self-activated by depositing the prepared materials into a six-inch tall slot. Flatten boxes. Cut or tear large boxes into sections no larger than 4 feet by 4 feet to prevent jamming the machine. No wet, waxed-coated or food-contaminated boxes.
    [Show full text]
  • Articles of Paper Pulp, of Paper Or of Paperboard
    Chapter 48 Paper and paperboard; articles of paper pulp, of paper or of paperboard Notes. 1.- For the purposes of this Chapter, except where the context otherwise requires, a reference to “paper” includes references to paperboard (irrespective of thickness or weight per m²). 2.- This Chapter does not cover : (a) Articles of Chapter 30; (b) Stamping foils of heading 32.12; (c) Perfumed papers or papers impregnated or coated with cosmetics (Chapter 33); (d) Paper or cellulose wadding impregnated, coated or covered with soap or detergent (heading 34.01), or with polishes, creams or similar preparations (heading 34.05); (e) Sensitised paper or paperboard of headings 37.01 to 37.04; (f) Paper impregnated with diagnostic or laboratory reagents (heading 38.22); (g) Paper-reinforced stratified sheeting of plastics, or one layer of paper or paperboard coated or covered with a layer of plastics, the latter constituting more than half the total thickness, or articles of such materials, other than wall coverings of heading 48.14 (Chapter 39); (h) Articles of heading 42.02 (for example, travel goods); (ij) Articles of Chapter 46 (manufactures of plaiting material); (k) Paper yarn or textile articles of paper yarn (Section XI); (l) Articles of Chapter 64 or Chapter 65; (m) Abrasive paper or paperboard (heading 68.05) or paper- or paperboard-backed mica (heading 68.14) (paper and paperboard coated with mica powder are, however, to be classified in this Chapter); (n) Metal foil backed with paper or paperboard (generally Section XIV or XV); (o) Articles of heading 92.09; (p) Articles of Chapter 95 (for example, toys, games, sports requisites); or (q) Articles of Chapter 96 (for example, buttons, sanitary towels (pads) and tampons, napkins (diapers) and napkin liners for babies).
    [Show full text]
  • THE REVISION of EU ECOLABEL CRITERIA for Converted Paper Products
    THE REVISION OF EU ECOLABEL CRITERIA for Converted Paper Products Draft Preliminary Report Malgorzata Kowalska, Antonios Konstantas, Oliver Wolf Marzia Traverso, Rose Nangah Mankaa, Sabrina Neugebauer November 2018 EUR xxxxx xx 1 This publication is a Science for Policy report by the Joint Research Centre, the European Commission’s in-house science service. It aims to provide evidence-based scientific support to the European policy-making process. The scientific output expressed does not imply a policy position of the European Commission. Neither the European Commission nor any person acting on behalf of the Commission is responsible for the use which might be made of this publication. Contact information Name: Address: E-mail: Tel.: JRC Science Hub https://ec.europa.eu/jrc JRCxxxxx EUR xxxxx xx PDF ISBN xxx-xx-xx-xxxxx-x ISSN xxxx-xxxx doi:xx.xxxx/xxxxxx XX-NA-xxxxx-EN-N Print ISBN xxx-xx-xx-xxxxx-x ISSN xxxx-xxxx doi:xx.xxxxx/xxxxxx XX-NA-xxxxx-EN-C © European Union, 20xx Reproduction is authorised provided the source is acknowledged. How to cite: Authors; title; EUR; doi All images © European Union 20xx, except: 2 Table of contents ABSTRACT ............................................................................................................ 3 Executive summary ............................................................................................... 3 1. Introduction ...................................................................................................... 4 2. Task 1: Scope and definition analysis ..................................................................
    [Show full text]
  • BLUE ANGEL the German Ecolabel
    BLUE ANGEL The German Ecolabel Recycled Cardboard DE-UZ 56 Basic Award Criteria Edition July 2014 Version 3 The Environmental Label is supported by the following four institutions: The Federal Ministry for the Environment, Nature Conservation and Nuclear Safety is the owner of the label. It regularly provides information on the decisions taken by the Environmental Label Jury. The German Environmental Agency with its specialist department for "Ecodesign, Eco-Labelling and Environmentally friendly Procurement" acts as office of the Environmental Label Jury and develops the technical criteria of the Basic Criteria for Award of the Blue Angel. The Environmental Label Jury is the independent, decision-making body for the Blue Angel and includes representatives from environmental and consumer associations, trade unions, industry, the trade, crafts, local authorities, academia, the media, churches, young people and the German federal states. The RAL gGmbH is the awarding body for the Environmental Label. It organises the process for developing the relevant award criteria in independent expert hearings – which involve all relevant interest groups. If you require further information please contact: RAL gGmbH RAL UMWELT Fränkische Straße 7 53229 Bonn Tel: +49 (0) 228 / 6 88 95 - 0 E-Mail: [email protected] www.blauer-engel.de Version 1 (07/2014): First Edition, Expiry date: December 31, 2018 Version 2 (11/2017): Prolongation without changes for 4 years, until 31.12.2022 Version 3 (04/2020): Changes in chapter 3.9 Table of contents 1 Introduction...........................................................................................................
    [Show full text]
  • 8 Paper and Paperboard Packaging M.J
    8 Paper and Paperboard Packaging M.J. Kirwan 8.1 INTRODUCTION A wide range of paper and paperboard is used in packaging today – from lightweight infusible tissues for tea and coffee bags to heavy duty boards used in distribution. Paper and paperboard are found wherever products are produced, distributed, marketed and used, and account for about one-third of the total packaging market. Over 40% of all paper and paperboard consumption in Europe is used for packaging and over 50% of the paper and paperboard used for packaging is used by the food industry. One of the earliest references to the use of paper for packaging food products is a patent taken out by Charles Hildeyerd on 16 February 1665 for ‘The way and art of making blew paper used by sugar-bakers and others’ (Hills, 1988). The use of paper and paperboard for packaging purposes accelerated during the latter part of the nineteenth century to meet the needs of manufacturing industry. The manufacture of paper had progressed from a laborious manual operation, one sheet at a time, to continuous high speed production with wood pulp replacing rags as the main raw material. There were also developments in the techniques for printing and converting these materials into packaging containers. Today, examples of the use of paper and paperboard packaging for food can be found in many places, such as supermarkets, traditional markets and retail stores, mail order, fast food, dispensing machines, pharmacies, and in hospital, catering and leisure situations. Uses can be found in packaging all the main categories of food, such as: r dry food products – cereals, biscuits, bread and baked products, tea, coffee, sugar, flour, dry food mixes, etc r frozen foods, chilled foods and ice cream r liquid foods and beverages – juice drinks, milk and milk derived products r chocolate and sugar confectionery r fast foods r fresh produce – fruit, vegetables, meat and fish Packaging made from paper and paperboard is found at the point of sale (primary packs), in storage and for distribution (secondary packaging).
    [Show full text]
  • Environmentally Friendly and Cost-Effective Method for Manufacturing Absorbent Grade Paper
    CELLULOSE CHEMISTRY AND TECHNOLOGY ENVIRONMENTALLY FRIENDLY AND COST-EFFECTIVE METHOD FOR MANUFACTURING ABSORBENT GRADE PAPER DHARM DUTT Department of Paper Technology, Indian Institute of Technology Roorkee, Saharanpur campus, Saharanpur, 247 001, India Received August 13, 2012 Absorbent paper is characterized by some of its important specific properties like water klemn, castor oil penetration and wet strength. An absorbent grade pulp was manufactured from a mixture of Eucalyptus tereticornis and veneer waste of poplar (15:85) by three distinct processes: (a) delignification at high alkali dose and longer cooking time (at 170 °C), followed by enzyme treatment (method-I), (b) delignification under normal pulping conditions, followed by semi-bleaching (CEOP) (method-II), and (c) delignification under normal pulping conditions, followed by oxygen treatment (method-III). Method-I required 7.15 h for pulp processing and the cost of pulp was US$ 2481.72/digester. The cost of pulp produced by method-II was comparatively lower (US$ 2272.69/digester). However, it required a longer time (9.45 h) and was not environmentally benign because of generation of chloro-organic compounds. The pulp produced by method-III was environmentally friendly, required a cooking time of 12.45 h, and was also economical (US$1936.32/digester), compared to the other methods. Keywords: Eucalyptus tereticornis, veneer waste of poplar, pulping, semi-bleaching, oxygen delignification, cost effectiveness, absorbent grade paper INTRODUCTION Broadly, papers are classified into four efficiency, and dust holding capacity in beer, categories, namely writing and printing, coffee, beverage, and tea bag filter paper.9 packaging and wrapping, tissue papers, and Absorbent paper especially is a normal kraft, specialty papers.
    [Show full text]
  • Picture-Framing's Final Touches
    Picture-Framing’s Final Touches Install a matt ed photo or art work like a pro. By Mark Miller Mat Board Matt ers You’ve succeeded at making an impressive picture frame, Mat board breaks down into When choosing a color, match a but to give it a professional look, museum board, made from color and shade in the photo or you need to dress it up with cott on rags (and someti mes art work. If you made a frame for matting, glass, a back, and dust called rag board) and a standard size photo or art work cover. Following that, you need conservati on board, made from (see the Cut List and Sizing Chart a means to hang your work. I’ll wood pulp. While the former is on page XX), look for a precut cover all of these applications costlier, the latt er, more common mat board that eliminates the and introduce a tool that will product off ers good archival need for a mat cutt er. Also note guarantee spot-on precision with protecti on at a lower price. That’s that standard conservati on mat because a buff ering agent is board comes in a 4-ply thickness, cutting the mat board and glass. added to the pulp, making it acid which works well for a full variety the fussier final touches, namely, free like the museum board. of frames. Sheet size measures Size and cut the materials Colors and textures 32 × 40". Use the thicker 1 Choose a mat board that can vary. museum board, which is compliments the photo or art 8-ply, for valuable work you intend to frame.
    [Show full text]
  • How to Preserve Acidic Wood Pulp Paper
    ConserveO Gram --------------------- June 2001 Number 19/24 How To Preserve Acidic Wood Pulp Paper Background Types of Wood Pulp Paper Early American papermakers used cotton and • Groundwood Pulp Paper. Also known as linen rags with relatively few additives to produce mechanical wood pulp, it was first developed small quantities of strong and durable papers. in the early 1800s and is used today for Animal glue and gelatin sizing or coatings were newsprint and pulp novels. Wood is added to help these long-fibered papers accept ink mechanically ground to produce fibers for without bleeding. paper pulp. Grinding creates very short paper fibers, which are also highly acidic due to the This early American hand-made paper has long retention of the wood’s lignin. cellulose fibers and little grain, making it unusually strong. The sheet may have a feathered Lignin is a naturally occurring substance in or deckled edge and/or a watermark. wood that darkens and breaks down into acidic byproducts as it ages. Ground wood pulp Increased demand for paper led to the paper is born acidic and rapidly becomes development of more efficient manufacturing brittle. Therefore ground wood pulp paper has processes. In 1806 a new sizing process was a relatively short life expectancy. developed using alum to precipitate rosin on the paper fibers. Alum is acidic and removes calcium • Chemical Wood Pulp Paper. Also called carbonate left from the washing process. The soda, sulfite, sulfate or Kraft paper (depending result was decreased permanence of the paper. upon how it is processed), chemical wood The use of mechanical papermaking equipment pulp paper was first developed in the mid- during the Industrial Revolution led to less durable 1800s.
    [Show full text]
  • Book Preservation Technologies
    Book Preservation Technologies May 1988 NTIS order #PB88-212410 ARCHIVES COPY DO NOT REMOVE FROM LIBRARY — Recommended Citation: U.S. Congress, Office of Technology Assessment, Book Preservation Technologies, OTA- 0-375 (Washington, DC: U.S. Government Printing Office, May 1988). Library of Congress Catalog Card Number 88-600521 For sale by the Superintendent of Documents U.S. Government Printing Office, Washington, DC 20402-9325 (order form can be found in the back of this report) Foreword Even in today’s high-tech society, books are the principal records of human civiliza- tion. Over the centuries, books have become the most reliable and permanent records avail- able, but, in the last century, that reliability has been threatened by the use of ‘modern, acidic paper that becomes brittle and unusable in a relatively short time. Books printed since 1850 are deteriorating en masse in libraries the world over. Nowhere is this problem more severe than in the U.S. Library of Congress; a major preservation program address- ing it was initiated in the early 1970s. The Library’s mass deacidification process is now being tested at a pilot plant, and planning is underway to design and construct a full-scale facility that could treat about 1 million books each year. This assessment analyzes the problem of acid deterioration of books and the program underway at the Library of Congress. The program at the Library involves the chemical treatment of books in a unique and effective process that, however, also presents some new engineering and safety concerns. Because of these concerns, the House of Representa- tives Committee on Appropriations requested this independent review of the Library’s system and other available or potential processes.
    [Show full text]
  • Morphology of Pulp Fiber from Hardwoods and Influence on Paper Strength
    RESEARCH PAPER FPL 312 FOREST PRODUCTS LABORATORY FOREST SERVICE UNITED STATES DEPARTMENT OF AGRICULTURE MADISON, WISCONSIN 53705 1978 SUMMARY The results of this investigation showed that physical properties of sheets made from hardwood fiber are very dependent upon fiber morphology. Chemical variation of pulp fibers did not exhibit an influence on sheet strength. Of the morphological characteristics in- vestigated, those contributing the most were fiber length, L/T ratio, and fibril angle. Hardwood fines (parenchyma cells) were detrimental to bursting and tensile strength. Vessel elements, in amounts found originally in typical hardwood furnishes, had no effect on tensile strength. MORPHOLOGY OF PULP FIBER FROM HARDWOODS AND INFLUENCE ON PAPER STRENGTH By RICHARD A. HORN Technologist Forest Products Laboratory,1 / Forest Service U.S. Department of Agriculture INTRODUCTION Although sheet strength properties are which, by the very nature of their required dependent upon process variables–e.g., fiber measurements, should be associated with orientation and bond formation between wood fiber and not with pulp fiber. The L/D fibers-an earlier lnvestigation on softwood ratio has been shown to be unreliable in species clearly showed that sheet strength was providing basic information on strength influenced most by the original properties of properties dependent upon fiber bonding (19). the pulp fiber ( 9 ). 2 / The objective of this in- The Runkel Ratio is a microscopic extension of vestigation was to examine similarly the in- the wood density in that wail thickness and fluence that the original morphological lumen width are the basic factors used in their characteristics of wood pulp fibers from determination.
    [Show full text]
  • Terminology on Paper & Pulp: Types of Paper and Containerboard, Containerboard Grades and Tests
    Terminology On Paper & Pulp: Types of Paper and Containerboard, Containerboard Grades and Tests Prepared for the Meeting of the Paper & Pulp Industry Project By Aselia Urmanbetova Date: September 10, 2001 1 Paper Products Chart: Containerboard Tree/Waste Paper Pulp Paper Paperboard Brown Coated Uncoated (container- board) Brown (65% White (95%- Copying Paper Newsprint hardwood and 100% 35% softwood) softwood) White Tissue (paperboard package) SBS (Solid Boxboard Bleach Sulfate) Coated Uncoated 2 Examples of Containerboard Grades/Mead Corporation: (Refer to the Glossary for the Explanation of the Terms) Standard Grades Grade Basis Weight Moisture Ring Crush Concora 26 SC 26.0 9.0 N/A 63 30 SC 30.0 9.0 50 68 33 SC 33.0 9.0 60 72 36 SC 36.0 9.0 71 79 40 SC 40.0 9.0 82 79 45 SC 45.0 9.0 102 95 Light Weights Grade Basis Weight Moisture Porosity Concora STFI 18 SC 18.0 7.5 30 33 9.5 20 SC 20.0 7.5 30 35 10.5 23 SC 23.0 9.0 30 59 12.0 Polar Chem Grade Basis Weight Moisture Ring Crush Concora Wet Mullen 30 PC 30.0 9.0 50 68 4.0 33 PC 33.0 9.0 60 72 4.0 36 PC 36.0 9.0 71 79 4.0 40 PC 40.0 9.0 82 79 4.0 45 PC 45.0 9.0 102 95 4.0 3 Paper Products and Containerboard Glossary B Flute A flute that is approximately 0.097 inches high.
    [Show full text]
  • Docuisit Anon
    DocuisiT anon 'RD 104 345 IR 001 734 AUTHOR Roberson, David D. TITLE Revised Specifications for Uncoated Permanent/Durable Book,Paper. INSTITUTION Barrow (N.J.) Research Lab., Richmond, Va. 3PONS AGENCY Council on Library Resources, Inc., Washington, D.C.; 'Library-of Congress, Washington, D.C. MAME 73 NOTE 126p. EDRS- PRICE BP-$0.76 HC -$6.97 PLUS POSTAGE DESCRIPTORS *Books; Library Materials; Measurement; *Paper (Material); *Preservation; Publishing Industry; Testing _IDENTIFIERS *Permanent Durable Book Paper ABSTRACT ' To aid in the evaluation of ther_physiCal guaiitiet.of_ _ books, specifications for permanent/durable book paper-were developed- and-authenticated. Permanent/durable book-paper was defined aspaper suitable=for use in the manufacture of books that meets or'exCeeds- tests which demonstrate that it has-an expectation of usefullife --under normal storage conditions of not less than-500 years. The literature was studied:for material on factors affecting the longevity Of-paper and methods of testing permanenceand-durability. -The resulting specifications include-ihe minimum cold-extractionpH,- folding endurance, tear resistance, and.retention of fading .endurancw_after_aging.'Tmenty commercially-available paper 'mere tested by the studrs_pethods. The test results are given in tabular . ibmcm.--1 211-item bibliography is appended. (Author/PF) REVISED SPECIFICATIONS FOR UNCOATED PERMANENT/DURABLE BOOK PAPER Final Report, on a Project Jointly Supported by The Library of Congress and The Council on Library Resources Principal Investigator, David D. Roberson U.S DEPARTMENT OF HEALTH. EDUCATION SONELfAltE NATIONAL INSTITUTE OF EDUCATION THIS DOCUMENT HAS BEEN REPRO OUCEO EXACTLY AS RECEIVED FROM THE PERSON OR ORGANIZATION ORIGIN ATING IT. POINTS OF VIEW OR OF UNIONS STATED DO NOT NECESSARILY REPRE SENT OFFICIAL NATIONAL INSTITUTE OF EDUCATION POSITION OR POLICY W.
    [Show full text]