1.3 All Items Are Subject to Overage and Underage . Refer Paragraph 3.2 (Page 2)

EXTRAS LIST 120 HOT ROLLED SHEET IN COIL – THIN GAUGE (1,0 – 1,4mm) Effective: 01 JANUARY 2018

1. PREFACE 1.1 Orders are accepted in accordance with ArcelorMittal South Africa's General Conditions of Sale and prices VAT exclusive. 1.2 All prices and transport tariffs (road or rail) are subject to a settlement discount of 2,5%, provided payment is made in accordance with ArcelorMittal South Africa’s General Conditions of Sale. 1.3 All items are subject to “overage” and “underage”. Refer paragraph 3.2 (page 2). 1.4 Material addressed by this price list is sold at a price per metric ton (1000kg) on gross mass as recorded on the assized mass meter or weighbridge at the works. 1.5 Unless otherwise stated, extras or deductions quoted in this price list are per metric ton and each extra or deduction is separate and explicit. 1.6 Normal testing and inspection as outlined in the specifications are carried out. When additional inspection, testing or processing is required, extras will be charged. 1.7 Prices and extras or deductions and transport tariffs are those ruling on date of confirmed delivery and are subject to change without prior notice. 1.8 When placing orders, customers must always specify the end use and ensure that this is compatible with the ordered quality or specification. ArcelorMittal South Africa will then endeavour to deliver the material "fit for purpose". However, if the end use is in general terms such as "stock", or "general engineering", the product quality control will be in terms of the quality or specification only. 1.9 After orders have been accepted and confirmed, they cannot be cancelled in whole or in part or altered in any manner whatsoever, except by special agreement with ArcelorMittal South Africa in writing. Should an order be modified, the order as amended, it will be re-priced. 1.10 The publication of this price list does not place ArcelorMittal South Africa under any obligation to supply the quoted qualities and sizes at all times. Availability remains subject to confirmation and the stipulations in both the price list and relevant data sheets. 1.11 Before processing material, customers must ensure that it meets their requirements. Non-compliance in this regard may invalidate a claim. ArcelorMittal South Africa does not prescribe any particular checking or testing methods. Visual checks, simple dimensional checks and reference to test certificates and/or orders should be performed beforehand.

2. PRICE INFORMATION (Definitions) 2.1 ITEM An item is a product of a single technical specification (i.e. a single quality, width, thickness, coil size and packaging, surface finish or condition, and any additional processing parameters required or requested.)

2.2 ITEM EXTRAS Item extras apply to the total number of full slab coils ordered per item for delivery in a given calendar month. Only identical items (full item description) will be combined for item extra determination (Best Tonnage Ordered “BTO’d)

3. GENERAL INFORMATION 3.1 MINIMUM ORDER QUANTITY The minimum quantity per item ordered shall be in accordance with the following: Standard items Other items 2 Full slab coils On Enquiry only, 6 full slab coils for width 1219, larger quantities may be required for other widths Refer to Annexure 2 (page 5) for applicable full slab coil mass according to width and Annexure 1 (page 4) for Standard items.

2018-01- 01 Cancels and supersedes issue dated 2017-10-01 Rev1 1 Page EXTRAS LIST 120 HOT ROLLED SHEET IN COIL – THIN GAUGE (1,0 – 1,4mm) Effective: 01 JANUARY 2018

3.2 OVERAGE/UNDERAGE

The principle of delivering the proceeds of full coils is applicable in all cases. (Refer also to Table Annexure 3 page 5).

3.2.1 OVERAGE: a) The overage allowed is ordered mass plus 10%. (One Full coil overage for standard items)

3.2.2 UNDERAGE: Standard items and other available items: a) The underage allowed is ordered mass minus one maximum Coil (1,1 nominal coil mass underage for standard items) b) In cases where the underage applied results in less coils delivered than the original order, no penalty due to the reduced order quantity will be applied. c) A replacement order for the proceeds of 6 slab-coils may be placed at an item extra equal to the original order, should the underage applied result in less material delivered than originally ordered.

3.3 MASS OF COILS 3.3.1 Mass of individual coils: Orders for coils with a specified exact mass will not be accepted. Coils may be ordered to the nominal full coil mass as per ruling mass tables, or smaller split coils (half size). Customers must indicate the maximum coil mass that can be handled to ensure the correct selection of available options. 3.3.1.1 Full mass coils: Defined as coils with a mass of at least 75% and a maximum of 110% of the specified nominal mass as per ruling coil mass tables. 3.3.1.2 Light mass coils: Defined as coils with a mass less than full mass coils, but at least 70% of the nominal mass per ruling coil mass tables. 3.3.2 Mass of all coils for the ordered item: Despatch will take place as follows: a) At least 90% of the ordered mass in full mass coils b) Not more than 10% of the ordered mass in light mass coils

3.4 MILL EDGE COILS Un-cropped ends will be limited to a minimum.

3.5 MILL RUN COILS Mill run coils are supplied untrimmed and un-cropped from the Hot Strip Mill. Refer to Claims Allowance policy.

3.6 MARKING The quality, width and thickness are marked on every coil. When a test and/or analysis certificate is required, the cast number will be shown on the coil.

4. QUALITY EXTRAS Specification Quality R/t Code (VAT exclusive) Commercial Quality 123 011 0 SAE 1006 395 000 40 SAE 1006 (Si0,03%) 395 007 55 SAE 1008 098 000 30 SAE 1008 (Si0,03%) 098 007 45 Note: Other Specifications on enquiry.

5. ITEM EXTRA TABLE

Item 1) Standard items 2) Non-Standard items 3) (Number of full slab coils) R/ton (VAT exclusive) R/ton (VAT exclusive) 1 800 Not Available 2 550 950 3 400 750 4 250 550 5 150 400 6-9 50 300 10-16 0 220 17-25 -90 130 ≥26 -180 40

Notes: 1) Minimum order quantity per item of 2 full coils. Please refer to Annexure 2 (page 5) for applicable full coil mass according to width. 2) All Standard Items. For listing please refer to Annexure 1 (page 4). 3) All other items not listed in Annexure 1 strictly on enquiry only.

6. WIDTH / THICKNESS EXTRAS Width Thickness (mm) 1000mm 1) 1219mm R/ton (VAT exclusive) 1,0 Not Available 1455 1,2 1225 1105 1,3 995 875 1,4 880 755 Note: 1) All items 1000mm width on enquiry only Only the above dimensions are available.

7. PROCESSING EXTRAS R/ton (VAT exclusive) 7.1 TOLERANCES Restricted thickness tolerance to 75% of specification on extras list: 135

7.2 Products in this extrasList are sold as MILL EDGE, UNPICKLED ONLY. 7.3 Restricted Flatness specification is not available ex Saldanha

8. PACKAGING EXTRAS

Non Protective (Code 91) Coil size R/ton (VAT exclusive) ½ size-coil 171 Full size-coil 0

STANDARD ITEMS ANNEXURE 1

Thickness (mm) Product Width Product condition (mm)

1. Commercial Quality (code 123 011) 1,0 1219 Un-pickled, mill edge, full coils 1,2 1219 Un-pickled, mill edge, full coils 1,45 1219 Un-pickled, mill edge, full coils

2. SAE 1008 Si 0,03% (code 098 007) 1,2 1219 Un-pickled, mill edge, full coils 1,4 1219 Un-pickled, mill edge, full coils 1,45 1219 Un-pickled, mill edge, full coils

Requests for additional Standard Items can be made via your Account Manager. Such requests will be submitted for evaluation and approval by ArcelorMittal South Africa Management.

COIL MASS TABLE ANNEXURE 2

Final product width Nominal (Mill edge) Full-coil mass (t) 1000mm 18 1219mm 22 Tolerance on coil mass of individual coils: +10% -25% (Light mass: -30%) Please note: Coil masses for Thin Gauge differ from those for thicker gauges.

OVERAGE / UNDERAGE ANNEXURE 3

(DESPATCH TOLERANCES ON ORDER TONNAGE PER ITEM) The principle of a discrete full-coil as smallest sales unit applies

Number of STANDARD ITEM Full Slab Coils* %OVER / % UNDER 2 +10/-55 3 +10/-37 4 +10/-28 5 +10/-22 6 +10/-18 7 +10/-16 8 +10/-14 9 +10/-12 10 +10/-11 >10 +1 FSC / - 1,1 FSC* Number of NON-STANDARD ITEM Full Slab Coils %OVER / % UNDER 6 +10/-18 7 +10/-16 8 +10/-14 9 +10/-12 10 +10/-11 >10 +10/-10 Note: * FSC = Full Slab Coil

2018-01- 01 Cancels and supersedes issue dated 2017-10-01 Rev1 5 Page