®

MOISTURIZING SHAMPOO FORMULATION #BC-35-7

INGREDIENT METHOD Formulation Method: Cold process SNAP SHOT A moisturizing natural shampoo that provides healthy and shiny hair. KEY INGREDIENTS Ingredients Wt% PHASE A SF2 Water QS PHASE B TECHNOLOGY SHOWCASE Glycerin 5.000 Chrondus Crispus (Carrageenan) (Genuvisco CG-131, CP Kelco) 0.400 Product Type Xanthan Gum (Keltrol CG SFT, CP Kelco) 0.800 Serum PHASE C Decyl Glucoside (Plantaren 2000, BASF) 20.00 Lauryl Glucoside (Plantaren 1200, BASF) 10.00 Market Focus: Hydrogenated Jojoba Esters (Floraester K-20W, Floratech) 1.250 All PHASE D Carthamus tinctorius (Safflower) oleosomes + water (Hydresia® SF2) 5.000 Function: Passiflora Edulis Seed Oil, Oriza Sativa Rice Bran Oil, Euterpe Oleracea Fruit Oil 1.500 (Beracare ARS Hair System, Beraca) Moisturization Fragrance (Fructis) 0.300 Repair PHASE E Hydrolyzed Wheat Protein, Hydrolyzed Wheat Starch (Cropeptide W, Croda) 3.000 Skin Types: Preservation (Geogard Ultra) QS

All PROCEDURE 1) Premix ingredients of Phase B and add to Phase A under strong agitation. Mix 30 Contact Us: minutes. 2) Add ingredients from Phase C in order of appearance. Mix until homogenous. Heating Sales & Technical Support to 40-45°C will accelerate the process. Mix together the ingredients from phase D at [email protected] 400 rpm for 20 minutes. Add to the batch. 403.668.6685 3) Add ingredients from Phase E in the order and mixing well between each addition. Mix at 600 - 800 rpm for 20 minutes. Adjust the pH between4.5 - 5.0. For more information please visit www.botaneco.com SPECIFICATIONS Viscosity: Brookfield RVF #6 @ 20 rpm: 13000 cps

Information contained in this technical literature is believed to be accurate and is offered in good faith for the benefit of the customer. This company, however, cannot assume any liability or risk involved in the use of its chemical products since the conditions of use are beyond our control. Statements concerning the possible use of our products are not intended as recommendations to use our producst in the infringement of any patent. The customer must insure that its uses of our products are non-infringing. We make no warranty of any kind, expressed or implied other than the material conforms to the standard applicable specification.