Your best source for specialty power tools.
WWW.TIMBERWOLFTOOLS.COM
New Mafell Tools!
TOLL-FREE ORDER LINE 1-800-869-4169
2017 — 2018 2 MAKITA TIMBER FRAMING POWER TOOLS
e are the timber framing, log building your order online on our secure website, or Wand post & beam industries’ best call and talk to one of our knowledgeable tool source for specialty power tools, supplying experts. We look forward to working with you. the broadest selection of big timber power tools available anywhere. Our power tools are ready for immediate delivery. With accessories, bits, chains, At TIMBERWOLF TOOLS, we are committed blades and replacement parts fully stocked to the highest level of customer service, and to keep your tools operating at peak our knowledgeable and friendly associates performance, we are confident you will are experienced in the use of the tools listed enjoy your power tools from TIMBERWOLF in this catalog. We welcome you to place TOOLS for many years to come.
Dimensions expressed in inches are approximate only. Note: 1/8" = .125" = 3.175 mm. Prices on tools are subject to change without notice.
Standard Equipment MAKITA 7104L Chain Mortiser – 18 mm (23/32") Able to cut mortises both quickly and chain – Wrench accurately, the durable Makita Chain – Chain oil Mortiser makes fast work of mortising with a head that pivots to three Additional Chain Sizes plunge positions. This is the ideal – 15 mm (19/32") tool for small to medium size timber – 16.5 mm (21/32") frame companies, while being simple – 18 mm (23/32") enough to operate for the – 21 mm (27/32") – 24 mm (15/16") “do-it-yourself” home builders. – 30 mm (1-3/16") Accessories PRICE MATCH!! – 30 mm bar If you can find the 7104L at a lower – 30 mm sprocket price, where the supplier has it in stock and can ship it immediately, call us at 1-800-869-4169. We will match that price and ship your 7104L today! 120V Call for details.
SPECIFICATIONS Amps...... 12.7 Max. mortise width – Longitudinal ...... 5-1/8" No load speed...... 3,200 RPM Max. mortise width – Transverse...... 7-1/4" Overall dimension. . .15-1/4" L x 11-3/4" W x 20-1/4" H Max. mortise depth...... 7-1/8" Net weight...... 41 lbs Clamp capacity...... Max. 12-1/8" Power supply cord...... 16.4'
Step 1 Step 2 Step 3 Step 4 Step 5
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAKITA TIMBER FRAMING POWER TOOLS 3
Standard Equipment MAKITA KP312 12-1/4" Power Planer – Socket wrench Wide 12-1/4" capacity allows for full – Triangular rule width planing of your large 12" beams – Double edged high speed steel blades and timbers. Features like the front roller, large cushioned front handle and adjustable guides help make this new power planer very easy to use. Now with more power and reversible blades for quicker change- out, this is the ideal planer for your shop.
Check our website for the sale price on the 7104L, KP312, 120V and 5402NA
SPECIFICATIONS No load speed...... 12,000 RPM Max. planing width...... 12-1/4" Overall length...... 21-3/4"
Max. planing depth...... 3 mm Net weight...... 40 lbs
Amps...... 15 Power supply cord...... 33'
Standard Equipment MAKITA 1806B 6-3/4" Beam Planer – HSS planer blades Perfect for planing your medium – Sharpening holder sized timbers. Both powerful and – Guide rule – Bevel guide accurate, this workhorse will readily – Hex wrench create beautifully planed surfaces on – Wooden case even the hardest of woods.
Go to our website to see our Makita tool 120V combination specials!
SPECIFICATIONS No load speed...... 15,000 RPM Max. planing width...... 6-3/4" Overall length...... 20-7/8"
Max. planing depth...... 5/64" Net weight...... 19 lbs
Amps...... 10.9 Power supply cord...... 16.4'
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 4 MAKITA TIMBER FRAMING POWER TOOLS
Standard Equipment MAKITA 9741 Wheel Brush Sander – SC-100 nylon wheel Unmatched finishes are produced brush by this unique sander. The wheel – Hex wrenches – Hose coupling brush spins at 3500 RPM, beautifully highlighting the natural textures and Additional Wheel Sizes wood grain. Ideal for the clean up of – SC-80 nylon wheel re-claimed timbers, logs, and rough- brush (coarser sawn beams, and for giving planed than the standard surfaces a more rustic look. SC-100) – Wire brush wheel (for metal and aggressive wood cleaning)
120V
SPECIFICATIONS Wheel size (dia. x width)...... 4" x 4-3/4" Sanding width...... 4-3/4" No load speed...... 3,500 RPM
Overall dimensions. . . 12-1/4" L x 7-1/4" W x 7-1/8" H Net weight...... 9.2 lbs
Amps...... 7.8 Power supply cord...... 16.4'
Standard Equipment MAKITA 1002BA Curved Base Planer – HSS planer blades From creating arches and arcs in – Sharpening holder timbers to working on scarfs in logs, assembly – Blade gauge this planer’s prowess is well known. assembly With radius blades, this tool is – Socket wrench frequently used to create the “hand Accessories hewn” look in timbers and logs. – Carbide planer blades – Radius blades (for the “hand concave min. radius 11-7/8" hewn” look)
120V
SPECIFICATIONS Amps...... 11 Planing width...... 4-3/8" Shoe length...... 11"
Planing depth...... 5/32" Net weight...... 13 lbs
No load speed...... 15,000 RPM Power supply cord...... 16.4'
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAKITA TIMBER FRAMING POWER TOOLS 5
Standard Equipment MAKITA 5402NA 16-5/16" Beam Saw – Rip fence This Makita beam saw features an – Hex wrenches updated design with an improved – 32 tooth carbide blade blade guard, an adjustable blade guide and a more powerful 15 Additional Blade – 60 tooth carbide AMP motor. A direct in-line handle, blade adjustable base and rip fence make this a useful saw for any size shop. The standard 32-tooth carbide blade is great for ripping or cross-cutting.
Please check our website for the current and 120V sale prices on Makita products.
SPECIFICATIONS No load speed...... 2,300 RPM Blade diameter...... 16-5/16" Length...... 24-1/4" Arbor...... 25.4 mm Amps...... 15 Max. cutting capacity at 90°...... 6-3/16" Net weight...... 32 lbs Max. cutting capacity at 45°...... 4-3/16" Power supply cord...... 16.4'
Standard Equipment MAKITA 5104 10-1/4" Circular Saw – TCT saw Blade (24T) This saw is a new and improved – Hex wrench model of an old favorite! The big – Guide rule improvements over past models include its sturdy cast aluminum base and the cutting accuracy, due to better blade visibility from both sides. With its deep cuts and steady control, it will quickly become an indispensable tool in your shop.
120V
SPECIFICATIONS Max cut at 45˚...... 2-3/4" Blade diameter...... 10-1/4" Amps...... 14 Arbor...... 5/8" No load speed...... 3,800 rpm Bevel range ...... 0 – 45˚ Length...... 16" Max cut at 90˚...... 3-3/4" Net weight...... 18.3 lbs
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 6 PROTOOL CIRCULAR SAW
ABOUT PROTOOL
n 2000, the parent company of PROTOOL, Now that the line is fully established, the ITTS Tooltechnic Systems AG & Co , . “carpentry line” of tools is simply labeled acquired the portable power tool line from with the PROTOOL brand . PROTOOL is well the HOLZHER Company in order to expand known for its high quality, long service life their existing line of high quality timber- and innovative technology all around the framing tools . Based in southern Germany, world . Tradition, however, will always link the HOLZHER Company was established these German engineered timber-framing in 1914 and produced tools known by tools to their heritage at the HOLZHER timber framers for their extreme durability Company . and innovative features . After intense performance and reliability testing by PROTOOL, the “carpentry line” of premium tools was introduced by TIMBERWOLF TOOLS as “PROTOOL System HOLZHER” to the North American marketplace in 2001 .
PROTOOL CSP 85 9-1/2" Circular saw PROTOOL high performance circular saws are well-known for their powerful motors, robust gears, and durable metal casings, resulting in long-lasting, reliable saws that are Stable aluminum base easy to use . Capable of cutting up to a 60° angle, and then returning to the 90° position without fine tuning or re-squaring . Depth is adjusted precisely with the use of the unique front height guide pole rather than a traditional front hinge system, while safety is increased by the superior blade guard . The large aluminum base provides for stable and 230V accurate cuts . Precise angle cut guide
SPECIFICATIONS Max . cutting capacity at 60°...... 1-5/8" No load speed...... 4000 RPM Blade diameter...... 9-7/16" Rated input...... 2200 W Arbor...... 30 mm Motor ...... 230V Max . cutting capacity at 90°...... 3-5/16" Net weight...... 18. lbs Max . cutting capacity at 45°...... 2-3/8" Power supply cord...... 12'
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 PROTOOL DRILL STAND GUIDE SYSTEMS 7
Accessories Standard Drill Stand Guide Systems – Odd size centering clamp Precise drilling can be achieved by plate (7 – 27mm capacity is 5" the use of these sturdy drill guides . diameter holes) – Clamps and Take the guess Extenders work out of drilling with accurate depth gauges, centering plates and a clearly marked contact point . The GDP “A” models offer stepless angles up to 45° and can “A” type base be securely clamped to the timber with the optional clamps and clamp Max . clamp extenders . Just one more gem of the capacity is 11-1/4" with PROTOOL System that allows you to optional clamp produce accurate timber connections . extenders optional clamp extenders Lateral guides are standard with each drill guide
SPECIFICATIONS Drill depth max .*...... 14-15/16" / (12-7/16")
Drill bit size range...... 6 mm – 26 mm Collar width...... 43mm or 57mm
Drill bit length max ...... 18" Weight ...... 7. lbs
* “A” model drill depth max . values appear in ( ) .
GDP 460 GDP 460A Drill Guide Swiveling Drill Guide Max .14-15/16" Depth Max 12-7/16". Depth
See alternative Mafell BST Drill Stations on Page 19.
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 8 WOOD OWL TRI-CUT AUGERS
Accessories TRI-CUT AUGERS Ultra Smooth Tri-cut Augers – Hardened file with Ultra smooth cutting for perfect wooden handle finished holes without “blowout.” – 5-1/2" (140mm) extender fits 1/2" • Tri-cut design. chuck • Unique “ultra-smooth” cutting spurs. • Teflon coated to resist heat and friction. • Carbon steel construction. • Perfectly concentric shape. • Lighter weight than standard augers.
7-1/2" & 18" LENGTHS Cut with normal bit Cut with Wood Owl bit
SPECIFICATIONS FOR 7-1/2" SPECIFICATIONS FOR 18"
Diameter (Approx) Metric Diameter (Approx) Metric
3/8" ...... 9.5mm 3/8" ...... 9.5mm
7/16" ...... 11mm 7/16" ...... 11mm
1/2"...... 13mm 1/2"...... 13mm
9/16"...... 14mm 9/16"...... 14mm
5/8" ...... 16mm 5/8" ...... 16mm
11/16"...... 17.5mm 11/16"...... 17.5mm
3/4" ...... 19mm 3/4" ...... 19mm
13/16"...... 21mm 13/16"...... 21mm
7/8" ...... 22mm 7/8" ...... 22mm
15/16"...... 24mm 15/16"...... 24mm
1"...... 25mm 1"...... 25mm
–––– 1-1/16"...... 27mm
1-1/8"...... 29mm 1-1/8"...... 29mm
1-1/4"...... 32mm 1-1/4"...... 32mm
1-3/8"...... 35mm 1-3/8"...... 35mm
1-1/2"...... 38mm 1-1/2"...... 38mm
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAKITA DRILL & OLIVER BAND SAW 9
Standard Equipment MAKITA 6302H High Torque Heavy Duty – 360° auxiliary 1/2" Drill / Driver handle • Precision cut steel gears – Chuck key • Magnesium front housing for Compatible with the increased durability PROTOOL drill stand guide system, as seen • Ergonomic handle with soft grip on page 7 and the for increased comfort Mafell drill stations • Extra long 8' rubber cord with on page 19 3-prong grounded plug • Variable speed reversible control • Double geared for high torque
120V
SPECIFICATIONS Power supply...... 120V Chuck Range ...... 1/8" – 1/2" Power cord...... 8' Amps...... 6.5
No load speed ...... 0 – 550 RPM Net weight ...... 4.8 lbs
Standard Equipment OLIVER MODEL 12M 8" Portable Band Saw – 6 teeth/inch blade Feel the freedom of taking the saw Accessories to the job, not the job to the saw. At – 4 teeth/inch blade only 30 pounds, the Model 12M is easy to use yet heavy duty enough to cut up to 8" thick softwood timbers. Scalloped details, rafter tails and corbels, as well as rounded cuts in medium size timbers, are the specialties of this machine.
120V
SPECIFICATIONS No load speed ...... 500 RPM Max. depth ...... 8" Wheel diameter...... 8"
Amps ...... 8 Net weight ...... 30 lbs
Power supply ...... 120V Power supply cord ...... 10'
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 10 ARUNDA MORTISE AND TENON SYSTEM
Dovetailing Mortise and Tenon System ARUNDA What usually comes to mind when you think of dovetails in wood is quality craftsmanship and superior joinery strength. That kind of woodwork is costly because it takes time and skill to achieve. But that’s where the ARUNDA Dovetail System can help. Here’s how it works. The ARUNDA System uses a male jig to make the dovetail tenon and a female jig to create the dovetail mortise. The cutting is done with the powerful Mafell LO65Ec Router coupled with the ARUNDA Dovetail Router Bit. Imagine how solid a floor system with dovetailed floor joists would be. It’s not hard to fabricate with the ARUNDA Jigs. In fact the ARUNDA Dovetail system is a faster way to make strong timber frame systems. Don’t let the simplicity fool you, though. The ARUNDA design has been carefully studied from DOVETAIL SYSTEM an engineering standpoint to maximize workloads.
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 ARUNDA MORTISE AND TENON SYSTEM 11
The jigs are available with either a fixed fence for 90˚ cuts, or with an adjustable tilting fence for angled cuts. In addition, the new fixtures now have both metric and inch measurements for easy step up.
SPECIFICATIONS
Intended Max Series Jig Model Timber Width Bearing Load
50 “B” series 1-3/4" – 4-0" 1,672 lbs
80 “B” series 3-1/8" – 5-1/2" 2,178 lbs B-Series (Fixed Fence) 120 “B” series 4-3/4" – 8-0" 3,630 lbs
160 “B” series 6-0" – 12-0" 4,620 lbs
50 “N” series 1-3/4" – 4-0" 1,672 lbs
N-Series 80 “N” series 3-1/8" – 5-1/2" 2,178 lbs (Tilting Fence)
120 “N” series 4-3/4" – 8-0" 3,630 lbs
Complete set includes: – ARUNDA Jigs for male and female dovetails – ARUNDA expansion plate for router – ARUNDA Dovetail bit with two reversible carbide blades – ARUNDA positioning gauge for setting dovetail depth – ARUNDA guide ring for router – Additional pair of reversible carbide blades for dovetail bit
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 12 MAFELL ABOUT MAFELL
AFELL is headquartered in Oberndorf needs and wishes of professional carpenters. Ma.N., Germany, about an hour south Customers' feedback makes a critical of Stuttgart. contribution to the development and design of technically innovative MAFELL products. Formed in 1899, MAFELL has been designing and producing the world's finest and most MAFELL tools are built for heavy-duty complete line of portable timber framing continuous operation under extreme tools since 1928. In more recent years, conditions. This toughness, combined with MAFELL's innovations have extended light weight alloys and advanced technical into solutions for conventional carpentry innovations, result in long term precision applications as well, including leading and performance. And best of all, there's products like the DD-40 Duo-Dowler, P1cc a MAFELL tool for nearly every carpentry Jigsaw, MT 55 Plunge saw and KSS track- application and a tradition of innovation mounted circular saws. which will continue to produce the finest carpentry tools for generations to come. In 1990, MAFELL moved into the world’s most advanced tool manufacturing facility in Beginning in January 2007, TIMBERWOLF Oberndorf a.N. This factory is set apart from TOOLS became a Distributor of this premium others since MAFELL manufactures nearly line of tools in the United States and Canada. every component for their tools in-house to We carry a full line of MAFELL accessories the highest quality standards. Using state- and parts to provide the very best support to of-the-art CNC machines, advanced plastic our valued customers, as well as providing injection molding equipment, and the most service if your tool ever needs repair. With advanced electric motor manufacturing a long term contract in place, TIMBERWOLF systems, MAFELL has a fully integrated TOOLS has invested heavily in selling and manufacturing plant and over 400 long-term supporting the MAFELL line of tools for employees who produce truly great tools. many years to come.
For over a century, MAFELL has been a 120V vs. 240V? reliable partner of the woodworking trade. Nearly all Mafell tools are available with The company is known worldwide for both 120V and 240V motors. On most models, its close relations with woodworkers and their we stock 120V configurations but we can determination in implementing the special quickly get 240V versions if you prefer.
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAFELL PORTABLE BAND SAW 13
Standard Equipment MAFELL Z 5 Ec 12" Portable Band Saw – 8mm/4teeth blade The Mafell Z 5 Ec takes the – 8mm/4R teeth blade (with rear teeth) backbreaking out of portable band – 6mm/4teeth blade – Handle for two-man sawing. Weighing only 30 lbs due to operation its magnesium die-cast components, – Parallel guide fence – 33' cord this powerful and precise tool can cut Accessories a full 12" timber with perfectly square – Trolley edges. Whether you are making – 6mm/6teeth blade elaborate curved designs, lap joints or tenons in large timbers, the Z 5 Ec does the job. Blades are precisely guided with a dual ball bearing guidance system, which ensures the blade will run smoothly and guarantees true vertical cutting. The angling blade feature allows you to cut far deeper into timbers than is possible with any other portable band saw. This is the finest 120V and 240V portable band saw in the world, featuring a powerful variable speed 120V 240V motor that even blows the saw dust off the line as you cut.
Go to our website to see our Mafell tool combination specials!
SPECIFICATIONS Nominal input ...... 2100 W
Nominal output...... 1280 W Cutting depth...... 12" (305mm) Motor options ...... 120V or 240V
Tiltable blade guides...... 0 – 30˚ Cutting blade speed...... 16.6 meters/s
Nominal no load speed...... 650 – 1550 1/min Weight...... 30 lbs
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 14 MAFELL CHAIN MORTISER & GUIDE FRAMES
Standard Equipment Chain Mortiser MAFELL LS 103 Ec – Stop plate The Mafell LS 103 Ec is a truly (free hand guide) impressive mortiser. Available with – Allen key SW4 a 1.5" or 2.0" chain/bar/sprocket, – Allen key SW8 – 33' cord it mounts on the stable FG 150 mortising stand to rapidly and accurately produce timber frame mortises. Or combine the LS 103 Ec with the SG 230 slotting stand and chain/bar/sprockets, and you can precisely plunge up to 11-1/4" and create slots with a thickness range of 1/4" – 13/16". This extraordinary mortiser features chain bars which do not require lubrication, a powerful 120V motor, and chrome- hardened chains for long life. And the LS 103 Ec is legendary 120V 240V for its reliability and accuracy. If you are thinking long-term, this is the right investment.
LS 103 Ec, Chain Set-up LS 103 Ec, Chain Set-up and FG 150 and SG 230
8mm width with 120V or 240V 1-1/2" width with 120V or 240V 11mm width with 120V or 240V 2" width with 120V or 240V 13mm or 14mm width with 120V or 240V
*For other chain sizes 6mm–21mm please call.
MAFELL FG 150 FG 150 Mortise Stand MAFELL SG 230 This guide support stand for the LS 103 Ec Chain Mortiser provides the stability needed for cutting perpendicular mortises to a depth of 5-7/8". The adjustable fence abuts against the beam for rapid plunges across the grain. SG 230 Slotting Stand This stand is intended for slotting in beam up to a depth of 11-1/4", either vertically or horizontally, supported by a sturdy fence with a handle.
MORTISE STAND SLOTTING STAND
*See www.timberwolftools.com for information on the SG 400 horizontal guide frame.
FG 150 WITH LS 103 Ec SG 230 WITH LS 103 Ec Cutting depth...... 5-7/8" Cutting Depth...... 11-1/4" No load speed...... 4900 RPM Mortising width in one cut...... 6–21mm Rated input...... 2100 W Mortising length in one cut...... 50mm Power supply cord...... 33' Combined weight ...... 28 lbs Combined weight ...... 37 lbs Motor options ...... 120V or 240V Motor options ...... 120V or 240V
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAFELL CHAIN BEAM SAW 15
Standard Equipment MAFELL ZSX Ec/400 Chain Beam Saw – (2) carbide-tipped The Mafell ZSX Ec/400 HM and fine-cut chains – Parallel guide fence ZSX Ec/400 Q are magnificent – Combination screw machines that cut precisely through driver large beams up to 15-3/4", rivaling the – 33' cord quality of a circular saw. This is partly Accessories – Trolley due to a patented anti-splintering – Universal guide plate which prevents chipping along support the cutting edge. And the HM model – Steel chain/bar – Sprocket 3/8" features razor sharp carbide teeth – Anti-splintering plate that cut remarkably cleanly. This saw
can be easily and accurately swiveled Optional up to 60 degrees in both directions, Configurations and coupled with the universal guide (1) 120V w/Carbide Chain support, makes accurate and deep (2) 120V w/Steel Chain compound-angle cuts. At only 32 lbs, (3) 240V w/Carbide it is the lightest carpentry chain saw Chain 120V 240V on the market. (4) 240V w/Steel Chain
SPECIFICATIONS Cutting Depth...... 15-3/4" Cutting depth at 45˚...... 11.1" Cutting depth at 60˚...... 7-3/4" Nominal no load speed...... 3000 – 3600 1/min Normal load speed ...... 2800-3400 1/min Nominal input ...... 3000 W Nominal output...... 1900 W Motor options ...... 120V or 240V Weight...... 30 lbs
See website for dual motor ZSX-TWIN
UNIVERSAL GUIDE Universal Guide The Universal Guide provides a fast and easy way to make perpendicular or angled cuts across timbers. Compatible with most large Mafell saws that use a parallel fence, the Universal Guide is precise, light and takes all the guess work out of making perfectly straight cuts.
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 16 MAFELL CIRCULAR SAWS
Portable Circular Carpentry Saw Standard Equipment MAFELL K 85 Ec – 12-T TCT saw blade The NEW K85Ec is packed with – Parallel guide fence features that make this lightweight – Hose connector saw safe and easy-to-use in so many – Allen key – SW5 applications. Its unique FLIPPKEIL – 13' cord plunge cut system sets this Mafell Accessories saw apart from others in its size – Guide rails range, with a riving knife which – Connecting piece – 24-T TCT blade disappears into the protective cover – 56-T TCT blade during plunges. Cutting depth and – Angle fence F-WA angle can be set exactly with the – Roller edge guide precise scales, and the dual rail fence allows accurate reference cuts and ripping. The CUprex motor enables variable cutting speeds according to the nature of the material and application. Like all Mafell portable circular saws, the K85Ec also fits onto the Mafell F-guide rail system. It cuts to 60˚ angles and then returns to the 90˚ position without fine- 120V tuning or re-squaring. Lightweight and precise!
SPECIFICATIONS Nominal no load speed...... 2250 – 4400 1/m Cutting depth...... 0 – 3-1/2" Cutting speed...... 25 – 41 meters/s Cutting depth at 45˚...... 0 – 2-7/16" Motor ...... 120V Cutting depth at 60˚...... 0 – 1-3/4" Saw blade diameter...... 9-5/16" Nominal input ...... 2300 W Tilt range...... 0 – 60˚ Weight...... 16 lbs
Portable Circular Carpentry Saw Standard Equipment MAFELL MKS 130 Ec – TCT saw blade The MKS 130 Ec is an impressive saw, – Parallel guide fence packed with performance features – Allen key SW 8 which set it apart from similarly sized – 33' cord saws. Sheer power and high torque Accessories take on a whole new meaning with – Guide rails the new high-output CUprex motor, – Connecting piece offering digital electronics and newly – Adapters for parallel developed control technology. Its speed guide fence – Screw clamps is continuously variable according – 24 tooth saw blade to the nature of the material and – 40 tooth saw blade application. Nothing is left to chance as far as safety is concerned: the MKS 130 Ec features a motor brake, self-closing saw guard and a riving knife. The MKS 130 Ec cuts to 60 degree angles and then returns to the 90 degree position without fine-tuning or re-squaring. Mafell saws are lightweight due to their sturdy magnesium bases, and combine a superior 120V 240V blade guard and dust removal system. Everyone’s favorite saw!
SPECIFICATIONS Normal load speed ...... 2200 1/m Cutting depth...... 2 – 5-3/16" Cutting speed...... 15.4-31.5 meters/s Cutting depth at 45˚...... 1-7/16 – 3-11/16" Motor options ...... 120V or 240V Cutting depth at 60˚...... 1 – 2-9/16" Nominal input ...... 2500 W Saw blade diameter...... 13" Nominal output...... 1600 W Tilt range...... 0 – 60˚ Weight...... 31 lbs
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAFELL CIRCULAR SAWS 17
Standard Equipment MAFELL MKS 165 Ec Portable Circular Carpentry Saw – TCT saw blade This Mafell carpenter’s portable – Parallel guide fence circular saw has an extraordinary – Hose connector weight/performance ratio made – Allen key – 33' cord possible due to the use of ultra- modern die-cast magnesium alloys. Accessories Weighing only 37 lbs, the MKS 165 Ec – Guide rails – Connecting piece accurately and powerfully makes – Adapters for parallel 6-1/2" cuts like no other saws in guide fence its class. The MKS 165 Ec cuts to – Screw clamps 60 degree angles and then returns – 28 tooth saw blade to the 90 degree position without – 20 tooth saw blade fine-tuning or re-squaring. The cutting depth can be adjusted quickly via a precise hand wheel and an easy to read scale. And this high quality saw is equipped with intelligent control electronics, ensuring a smooth start up and constant speed under load. Like all Mafell portable circular saws, the 120V 230V MKS 165 Ec also fits onto the Mafell guide rail system.
SPECIFICATIONS Normal load speed ...... 1450 1/m Cutting depth...... 3-3/8 – 6-1/2" Cutting speed...... 31 meters/s Cutting depth at 45˚...... 2-3/8 – 4-9/16" Motor options ...... 120V or 230V Cutting depth at 60˚...... 1-5/8 – 3-1/4" Nominal input ...... 2700 W Saw blade diameter...... 16-1/8" Nominal output...... 1730 W Tilt range...... 0 – 60˚ Weight...... 37 lbs
Portable Circular Carpentry Saw Standard Equipment MAFELL MKS 185 Ec – TCT saw blade The Mafell MKS 185 Ec carpenter’s – Parallel guide fence portable circular saw uses ultra- – Hose connector modern die-cast magnesium alloys – Riving knife/splitter to achieve an extraordinary weight/ – Allen key performance ratio. Weighing only – 33' cord 42 lbs, the MKS 185 Ec accurately Accessories and powerfully makes 7-5/16” cuts – Guide rail without bogging down. The cutting – Connecting piece depth on the MKS 185 Ec can be – Adapters for parallel guide fence adjusted quickly via a precise hand – Screw clamps wheel and an easy to read scale. It – 20 tooth saw blade cuts to 60 degree angles and then – 12 tooth saw blade returns to the 90 degree position without fine-tuning or re-squaring. This high quality saw is equipped with intelligent control electronics, ensuring a smooth start up and constant speed under load via a powerful 240V motor. For accurate long cross cuts, the MKS 185 Ec also 240V fits onto the Mafell guide rail system.
SPECIFICATIONS Cutting speed...... 31.8 meters/s Cutting depth...... 4-1/8 – 7-5/16" Motor ...... 240V Cutting depth at 45˚...... 2-7/8 – 5-1/8" Nominal input ...... 2800 W Cutting depth at 60˚...... 2-1/16 – 3-5/8" Nominal output...... 1780 W Saw blade diameter...... 17-11/16" Tilt range...... 0 – 60˚ Weight...... 42 lbs Normal load speed ...... 1460 1/m Also available in 120V
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 18 MAFELL CUTTING MACHINES
Standard Equipment Groove Cutter MAFELL NFU 32 – Expanding Now there is an innovative new tool grooving cutter with for precisely cutting grooves in large reversible knives timbers. The Mafell NFU 32 utilizes a – Parallel guide fence – Riving knife/splitter unique expanding groove cutter head – Allen key - SW4 with reversible TCT knives, which can – Allen key - SW6 be quickly adjusted with spacer rings, – Ring spanner up to a maximum width of 1-1/16". – 13' cord With its powerful 230V motor, there is Accessories no virtually no limit to what you can cut – Expanding grooving with this tool. The NFU 32 cuts grooves cutter head with knives as deep as 1-1/4", at angles up to 45°, – Reversible and comes with a parallel fence for square knife accurate ripping. Reversible TCT knives – Reversible flat ensure tear-free cuts, and an available cutter knife – Guide track guide track enables accurate square or 230V angle cuts. This is a cost effective and reliable groover and is the perfect tool for creating “housings” and electrical channels.
SPECIFICATIONS Normal load speed ...... 2440 1/m Cutting speed nominal load...... 16 meters/s Cutting tool diameter ...... 4-15/16" Motor ...... 230V Cutting tool width...... 5/8 – 1-1/16" Nominal input ...... 1600 W Cutting depth...... 0 – 1-1/4" Nominal output...... 1120 W Tilt range...... 0 – 45° Weight...... 18 lbs
Standard Equipment MAFELL ZK 115 Ec Skew Notch, Lap Joint and Tenon – Standard skew Cutting Machine notch cutter head Until now, making skew notches or (150 x 115mm) – Parallel guide fence birdsmouth cuts was a trial-and-error – Hose connector for process. The ZK 115 Ec makes it chip extraction easy to accurately cut birdsmouths: – Allen key SW 5 simply mark the center line of the cut – Screw driver (Torx T 15) across the beams, align the guide track and push! Precision cuts can Accessories: – Skew notch cutter be made in a single operation across head (190 x 80mm) a whole series of beams or rafters, – Lap-joint cutter increasing your productivity. Three head (236 x 50mm) aluminum heads are available, with – Guide rail – Screw clamps reversible carbide teeth, for dadoing – Guide rail extension to a depth of 2-3/4", or even deeper – Adapters for parallel birdsmouths. guide fence 230V
SPECIFICATIONS Motor ...... 230V Cutting tool...... 5-7/8" x 4-1/2" Weight...... 40 lbs Tilt...... 0 – 60˚ Cutting depth (standard head)...... 1-1/16" Revolution ...... 4050 rpm (1/min) Cutting depth (skew notch head)...... 1-7/8" Power – Input...... 2850 W Cutting depth (lap joint cutter)...... 2-3/4"
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAFELL DRILL STATIONS & PLANERS 19
Accessories Drill Stations MAFELL BST – Parallel fence Mafell’s new line of drill stations is – Copying insert brilliantly engineered and constructed – Special drill bit for with the highest quality materials for copying insert a superior drilling experience. Using a lightweight but rigid single aluminum column and continually adjustable iris-like guide rollers, these drill guides offer unprecedented accuracy. The new “S” versions can be precisely set to +/- 45°, and an innovative template system enables the user to produce highly accurate series of patterned holes. Notches in the base plate provide easy alignment to a marked location, and a parallel fence is available for end grain drilling or to reference drill from the edge of a timber. Mafell drill stations include top and bottom stops, as well as an adjustable tensioning cable, which DRILL STATIONS effortlessly returns the drill to its starting position.
SPECIFICATIONS BST 460 BST 460 S BST 650 S Min/max auger diameter using iris 5/16 – 1-3/16" 5/16 – 1-3/16" 5/16 – 1-3/16" Max tool diameter at 0° 5-1/8" 5-1/8" 5-1/8" Max tool diameter at 45° - 3-15/16" 3-15/16" Max drill length 18-1/8" 18-1/8" 25-9/16" Max drill depth 11-13/16" 10-7/16" 17-7/8" Collar diameter 1-11/16" 1-11/16" 1-11/16" Tilting adjust., both sides — 45° 45° Weight 11 lbs 11 lbs 12 lbs
12-5/8" Planer Standard Equipment MAFELL ZH 320 Ec – Pair of reversible The Mafell ZH 320 Ec is considered by knives most timber framers to be the finest – Chip nozzle wide format planer in the world. This – Single-end spanner 12-5/8" planer is very lightweight at – 33' cord only 31 lbs, and extremely powerful. Accessories It has excellent gliding properties, – Reversible planer even on moist timbers, and delivers a blades (3 pairs) flat, smooth planed surface. A new enhanced air duct provides excellent chip removal while the intelligent control electronics ensure smooth start-ups and constant speed under load. After switching off, the highly efficient tool brake stops the cutter head in seconds for added safety. The ZH 320 Ec features guide rollers for maximum utilization of the planing width, and easy-to-change reversible knives for high productivity planing. All this with a powerful and reliable 120V motor! Narrower ZH 205 Ec and ZH 245 Ec models also available, 120V 230V with all the benefits of the ZH 320 Ec!
SPECIFICATIONS Cutting speed...... 30.4 meters/s Planing width...... 12-5/8" Motor options ...... 120V or 230V Planing depth...... 0 – 3mm Nominal input ...... 2700 W Cutter head diameter...... 74mm Nominal output...... 1200 W Nominal no-load speed...... 8000 1/m Weight...... 31 lbs
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 20 MAFELL SAWS & CUTTING MACHINES
Plunge, Track Saw Standard Equipment MAFELL MT 55cc – Plunge-cut saw Circular sawing reaches its apex MT 55cc in MAFELL- with the MT 55cc Plunge Cut saw. MAX box As a plunge cut saw, the saw blade – 48T carbide blade is contained in the body of the saw. – 13' cord This makes it safer and easier to use Accessories on a track system. With or without an – Various guide extraction vacuum, it also creates a rails, fences, saw blades and other cleaner workspace because the dust is accessories are contained in the guard. Cutting depth available. See the adjustments can be made precisely MT 55cc Catalog using the pointer on the scale. The Sheet on the website. angle adjusts from 0–45 degrees, but can be overridden to +48 or -1 when a little more is needed in either direction. A scoring system to 3mm depth is available for cutting laminates splinter-free. Many other features 120V described in the MT 55cc Catalog Sheet on our website make the MT 55cc a cut above the rest.
SPECIFICATIONS Nominal speed - no load...... 3600 – 6250 rpm Cutting depth...... 2-1/4" Nominal power input ...... 1400 W (2 HP) Cutting depth at 45˚...... 1-5/8" Weight...... 10.5" lbs Tilting range...... -1 – 48˚ Motor ...... 120V
Multi-Cutter Standard Equipment MAFELL MF 26cc/400 Imagine 5 tools in 1: Mafell’s – Multi-Cutter MF-26cc/400 in carrying case MF-26cc/400 can groove-cut, – Guide track 400 cross-cut, plunge-cut, and chamfer – 24T carbide blade wood/laminates, plus its routing – Expanding groove cutter capabilities allow curving, bending, MF-VN 25 and folding a variety of challenging – Parallel guide fence – 13' cord materials such as aluminum and wallboard. This cutting tool is Accessories extremely precise thanks to its fine – Aluminum panel cutter – Wallboard cutter depth adjuster, and has best-in-class – Slotting head dust collection systems due to its – Various saw blades, enclosed cover and vertical removal guide rails, roller of chips. Switching between the edge guide and other five applications is fast and easy: accessories are available. the housing opens with the press of a button and lever, which automatically engages the starting switch lockout for added 120V safety. Carpenters, electricians, drywall pros, and architects should all review the MF-26cc/400’s many uses and accessories in the Mafell online catalog and on-line videos.
SPECIFICATIONS Nominal power input ...... 1400W Cutting depth with track...... 0 – 1" Track length ...... 15-3/4" Groove cutter width...... 5/8" – 1" Weight with track...... 14.6 lbs Nominal speed – no load ...... 3600 – 6250 rpm Motor ...... 120V
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAFELL SAWS 21
Standard Equipment MAFELL P1cc Jig Saw – MaxiMax carrying From time to time, even proven case solutions need to be reexamined – 3 jigsaw blades, CUnex W1, W2, W+P2 in the interest of progress. That’s – Base plate for 90˚ cuts exactly what Mafell did in this – Hose connector case and the outcome is the – Chip deflector innovative P1cc. The design of the – Splinter guard – Parallel fence new MAFELL precision saw blade CUnex W1, in particular, facilitates Accessories Various blades, extremely precise sawing. With fences, tilting plates an assortment of 11 different saw and other accessories blades, the P1cc is suitable for are available. See the cutting wood laminates, plastic, P1cc Catalog Sheet on our website. metal, timber containing metal, gypsum, melamine resin panels and fiber-center board. The splinter guard eliminates chipping on both top and bottom surfaces, and the P1cc is equipped with a CUprex compact motor that delivers 900 Watts of power. The P1cc compatibility with the MAFELL F guide rail system makes for even greater precision, and a separate tilting plate 120V is available for angled cuts up to +/- 45˚.
SPECIFICATIONS Bevel cuts...... 0–45˚ Motor ...... 120V Cutting depth with W3 blade...... 4-3/8" Length of stroke...... 1" No load strokes/minute...... 800–3000 Weight...... 5.5 lbs
Standard Equipment MAFELL PSS 3100 SE Panel Saw – 24-T TCT saw blade The PSS 3100 SE is the world‘s first – Allen key – SW5 self-driven, rail-guided and mobile – 13' cord panel saw. Unique design features Accessories ensure that hardly any dust escapes – Guide rail extensions during operation. In conjunction – 16-T TCT blade with the integrated suction channel – 32-T TCT blade and the S 50 M vacuum system, it – 56-T FT/TT blade eliminates practically all of the dust – 4-T Diamond blade particles that occur. With MAFELL‘s newly developed diamond saw blade, the PSS 3100 SE is well equipped for use with mineral containing materials including cement fiber panels. Full-wave electronics, with speed adjustment and smooth starting, improve safety and allow the speed to be adjusted for various materials, including plastics. The electronics also ensure constant speed under load and protect the machine 120V against overloading.
SPECIFICATIONS Feed rate speed...... 0.07 – 0.34 meter/s Cutting depth...... 0 – 1-3/4" Cutting speed...... 28 meters/s Cutting length ...... 10.2' Motor ...... 120V Saw blade diameter...... 6-1/2" Nominal input ...... 1490 W Nominal no load speed...... 2600 – 5200 1/m Weight...... 37 lbs
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 22 MAFELL CROSS CUTTING SYSTEMS
Standard Equipment MAFELL KSS 300 Cross-Cutting System – High-quality 40-T The Mafell KSS 300 cross-cutting carbide-tipped system offers finish carpenters, slim-line saw blade – Parallel guide fence floor-layers and cabinet makers a – Flexi guide (4.6') whole new way to make fast and – Hose connector for highly accurate cuts. This lightweight chip extraction and innovative circular saw is – Allen key SW 5 – 13.1 ft cord connected to a unique aluminum – Carrying case guide track, containing adjustable Accessories stops for either perfectly square – Guide rails cuts or precise miter cuts up to a 45˚ – Connecting piece angle. Stop carrying those heavy – Parallel fence tools to your worksite! The KSS 300 – Screw clamps – 24 tooth saw blade can take the place of a chop saw – 12 tooth saw blade and table saw, enabling the finish – 40 tooth laminate carpenter to make accurate and clean saw blade 120V cuts at the work location.
SPECIFICATIONS Tilt...... 0 – 45° Revolutions – no load...... 8800 rpm (1/min) Cutting depth at 0˚ with track...... 0 – 1-9/16" Motor ...... 120V Cutting depth at 45˚ with track...... 0 – 1-1/16" Power input...... 1.2 hp (900 W) Cutting depth at 0˚ without track...... 0 – 1-5/8" Weight with track...... 7 lbs Cutting depth at 45˚ without track...... 0 – 1-1/8" Length of cross cutting track ...... 11-13/16"
Standard Equipment MAFELL KSS 400 Cross-Cutting System – High-quality 24-T The KSS 400 will forever change carbide-tipped the way you think about cutting slim-line saw blade – Hose connector for large or small timbers. It can take chip extraction the place of a chop saw using its – Allen key SW 5 cross cutting system, emulates – Guide bow a table saw for making long cuts – 13.1' cord using the F Guide Rail System, and Accessories functions as a powerful circular – Guide rails – Connecting piece saw since the quick-release catch – Parallel fence easily detaches the saw from the – Screw clamps guide track. Three saws in one! This – 32 tooth saw blade enables a carpenter to make accurate – 16 tooth saw blade and clean cuts at the work location without having to walk back and forth to stationary saws, saving energy and time. And thanks to magnesium die-cast 120V components, the entire KSS 400 system weighs only 11 lbs.
SPECIFICATIONS Tilt...... 0 – 45° Revolutions – no load...... 5200 rpm (1/min) Cutting depth at 0˚ with track...... 0 – 1-15/16" Motor ...... 120V Cutting depth at 45˚ with track...... 0 – 1-9/16" Power input...... 1.5 hp (1100 W) Cutting depth at 0˚ without track...... 0 – 2-1/8" Weight with track...... 11 lbs Cutting depth at 45˚ without track...... 0 – 1-3/4" Length of cross cutting track ...... 15-3/4"
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAFELL CROSS CUTTING SYSTEMS 23
Cross-Cutting System Standard Equipment MAFELL KSS 60cc Armed with a powerful 14 amp – Guide track 400 CUprex Compact 120v motor and (15-3/4") performance-optimized digital – 32-T cross-cutting electronics, the KSS 60cc makes quick TCT blade – Parallel guide fence work of even the hardest woods up to – Hose connector 2-3/8" deep. The built-in 15-3/4" track, – Allen key – SW5 with its adjustable smart stop, creates – 13' cord the fastest, cleanest cross cuts at any angle up to 45 degrees. Detach the Accessories – Guide rails and all cross-cutting track with the press of their Accessories a button to virtually acquire the best – 16-T, 24-T, 56-T skill saw in its class: Mafell's K65cc! Carbide blades When off the track, the saw gains 1/4" – Roller edge guide of cutting depth and sheds 3 lbs of – Steel carrying case weight while maintaining accuracy for long rip cuts using the parallel guide fence or Mafell F-Guide tracks. Exceptional features include: Variable speed motor, fast and safe blade change, easy depth and tilting adjustment, 120V exceptional dust removal, precise depth stop settings, and superior riving knife/splitter technology.
SPECIFICATIONS Tilt range...... 0 – 45 degrees Cutting depth at 0˚...... 0 – 2-3/8" Nominal no load speed...... 2700 – 4700 1/m Cutting depth at 45˚...... 0 – 1-13/16" Motor ...... 120V Cutting depth off track at 0˚ ...... 0 – 2-5/8" Nominal input ...... 14 amps Cutting depth off track at 45˚ ...... 0 – 2-1/16" Weight...... 13.4 lbs Saw blade diameter...... 7-1/4" Length of cross cutting track ...... 16-1/16"
Cross-Cutting System Standard Equipment MAFELL KSS 80 Ec/370 All the features and performance of – Guide track 370 – 12-T TCT saw blade the NEW K85Ec, combined with all of – Parallel guide fence the advantages of a KSS-400 — the all – Hose connector NEW KSS-80Ec/370 is an extraordinary – Allen key – SW5 package. This powerful and innovative – 13' cord circular saw is connected to a sturdy Accessories – Guide rails aluminum guide track composed of – Connecting piece a friction pad on the bottom side of – 24-T TCT blade the guide and an adjustable “smart” – 56-T TCT blade stop for either perfectly square cuts or – Angle fence F-WA – Roller edge guide precise miter cuts, up to a 60˚ angle. All the innovative features of the KSS-400, with up to 3-3/8" of depth and a powerful CUprex motor capable of both cross- cutting and ripping. Simply place the guide track up against the leading edge of the stock and push the saw through the wood, without needing to guide the saw or follow the line by 120V eye. Precision and power in a lightweight design!
SPECIFICATIONS Nominal no load speed...... 2250 – 4400 1/m Cutting depth...... 0 – 3-3/8" Cutting speed...... 25 – 41 meters/s Cutting depth at 45˚...... 0 – 2-3/16" Motor ...... 120V Cutting depth at 60˚...... 0 – 1-9/16" Nominal input ...... 2300 W Saw blade diameter...... 9-5/16" Weight...... 19 lbs Tilt range...... 0 – 60 degrees Length of cross cutting track ...... 14-9/16"
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 24 MAFELL GUIDE RAILS
MAFELL GUIDES Connecting piece F-VS
Screw clamps F-SZ
Angle Splinter fence F-WA guard F-SS RAIL SYSTEM F
Guide Rail System F The new, convenient Guide Rail System F is easy to use and works with most MAFELL saws. With various lengths, the ability to easily connect multiple guide rails, and other features which make this system so easy to use, you will find the Guide Rail System F will only streamline your experience with MAFELL tools.
ACCESSORIES – Connecting piece F-VS
– F 80 (2.6' long) – Screw clamps F-SZ (1 pair)
– F 110 (3.6' long) – Splinter guard F-SS (11.2' long)
– F 160 (5.2' long) – Angle fence F-WA
MAFELL F-AF 1 Suction Clamping System The Aerofix system really sets Mafell tools apart, since it handles both dust extraction and makes clamps obsolete. The vacuum holds your 4.2' rail firmly in place, even on a rough surface, and can be connected to standard Mafell F-guide rails up to 10.6' when ordering the Flexible Hose FXS L. The Aerofix can be used underneath the rail for parting cuts or above the rail for recessing. You can find informative Aerofix videos online.
AEROFIX SYSTEM
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAFELL DOWEL AND KSS SYSTEMS 25
Duo-dowel System Standard Equipment MAFELL DD40 P Mafell’s DD40 Duo-Dowel Jointer has – Carrying case – Wooden dowels triggered a revolution in portable 8x30mm, 10x40mm joining. Never has it been easier to and 12x60mm make strong joints when fastening – Glue bottle pieces of wood together no matter – 2 Anti-slip mats – Drill bits whether the joints are butted, mitered 8mm, 10mm or beveled together. Each plunge and 12mm of the DD40 makes a pair of holes Accessories into which conventional dowels fi t. – 5mm, 6mm, 14mm, The stop system allows for accurate 15mm, and 16mm placement of the holes so that the carbide tipped drill companion piece is perfectly aligned. bits and various dowel sizes are Assembly is easy and can be pre- available. fi tted prior to gluing. No clamping is necessary. The DD40 system is faster, more precise and less expensive than 120V any of its rival joining systems.
SPECIFICATIONS Min. tool diameter ...... 3/16" Revolutions – no load ...... 5200 rpm (1/min) Drilling depth ...... 0 – 1 9/16" Motor ...... 120V Swivel range ...... 0 – 90° Power input ...... 1.3 hp (1000 W) Chuck diameter ...... 5/16" Weight...... 6.4 lbs Max. tool diameter ...... 5/8" Also available in 230V
Go to our website to see our Mafell cross cutting system videos!
VISIT US AT WWW.TIMBERWOLFTOOLS.COM 26 MAFELL PULL-PUSH SAWS
Pull-Push Saw Standard Equipment MAFELL ERIKA 70 Ec The ERIKA 70 Ec Pull-Push saw – 32T carbide blade – Universal guide fence combines the strengths of a table – Push stick saw and miter saw, and eliminates – Allen key 6 mm their weaknesses. It is highly portable – Extraction set with 2 compared to the industry’s heavy table connectors – Fold-away support saws, with the built-in /Quickstand\ /Quickstand\ creating a steady and level table in – 13' cord seconds even on uneven surfaces. Accessories The ERIKA 70 Ec features a better – Various blades, tilt range than the competition (-3 to extensions, supports, 48°) and a lowerable riving knife. The adapters and other high-performance 2250 watt variable- accessories are available. speed motor even makes the cutting of plastics and aluminum possible. And its unique suction channel concentrates the sawdust and extracts it to the rear, resulting in a cleaner site and cleaner work. Factor in the most 120V comprehensive range of optional accessories, and you have the most precise 2-3/4" pull-push saw on the market.
SPECIFICATIONS Tilt range...... -3 – 48° Cutting height ...... 2-13/16" Weight...... 71 lbs Cutting height at 45°...... 1-15/16" Saw blade speed (no load). . . . . 2100 – 4200 1/min Cutting length ...... 13-3/8" Table top dimensions...... 20-5/8" x 32-3/16" Nominal input ...... 2250 W Motor ...... 120V
Pull-Push Saw Standard Equipment MAFELL ERIKA 85 Ec If the ERIKA 70 Ec cannot handle – 40T carbide blade – Extension kit with wheels the required cutting height, there – Multi-purpose guide is always its “big sister” – Mafell’s fence MFA ERIKA 85 Ec – ideal for solid timber – Push stick – Allen key 6 mm and carpentry applications with a – Extraction set with 2 cutting height of up to 3-3/8" (85 connectors mm). It also comes standard with the – Fold-away support multi-purpose guide fence – allowing /Quickstand\ – 13' cord two miter cuts without changing Accessories or adjusting the fence, resulting – Various blades, in perfect 90° connections. With extensions, supports, a powerful 230V motor and four adapters and other accessory blade options, the ERIKA accessories are available. 85 Ec is able to process solid wood, board materials, parquet and laminate flooring, aluminum profiles and plastics. Despite being a “big sister,” the ERIKA 85 Ec is the lightest pull-push 230V saw in its class: enabling quick and easy transportation to save precious time on the job site.
SPECIFICATIONS Tilt range...... -3 – 48° Cutting height ...... 3-3/8" Weight...... 76 lbs Cutting height at 45˚ ...... 2-5/16" Saw blade speed (no load). . . . . 1900 – 3800 1/min Cutting length ...... 16-7/8" Table top dimensions...... 20-5/8" x 36" Nominal input ...... 2500 W Motor ...... 230V
QUESTIONS? CALL TODAY, TOLL-FREE 1-800-869-4169 MAFELL ROUTERS & DOOR LOCK MORTISER 27
Standard Equipment MAFELL LO65Ec Hand Router – Template guide The Mafell LO65Ec is the optimum – Collet - 8mm (5/16") – Adaptor for router router for the ARUNDA dovetail fixture bit (M 12 x 1) system. With a 2600 W (3.5 HP) 230V – Chip collector motor, capable of operating between – Single-end spanner 10,000–22,000 rpm, this router has wrench (SW 10) – Single-end spanner all of the power necessary to drive wrench (SW 22) the custom ARUNDA dovetail bit at – Carrying box the highest productivity rates. This is – 13.1' cord the most precise and powerful router Accessories available for demanding applications, – Various collets, and has been extensively tested template guides and guide tracks and recommended by the ARUNDA are available. See company for optimum performance the LO65Ec Catalog with their fixtures. The LO65Ec includes Sheet on our a storage box. website. 230V – Fence (LO65Ec Maxi version)
SPECIFICATIONS Speed...... 10000 – 22000 1/min Cutting depth...... 0 – 2-9/16" Nominal input ...... 2600 W Standard collet chuck...... 8 mm Nominal output...... 1750 W Alternative collets ...... 6 – 12 mm Motor ...... 230V Adapter for internal thread bits ...... M 12 x 1 Weight...... 12.1 lbs
Door Lock Mortiser Standard Equipment MAFELL SKS 130 With its handy, ergonomic, and – Carrying case – 2 Chain bars compact construction, the Mafell – 2 Mortising chains SKS 130 is the world’s first portable – 2 Sprockets tool for mortising door locks, even – Allen key 5 mm on a mounted door! The powerful – 13' cord 230V motor is capable of mortising Accessories lock cases of all sizes in solid wood – Various chains, and wood-based materials. Two replacement chain links and rivets are available. special mortising chains move in opposite directions to ensure tear-free work and optimum chip flow, and the Pertinax/rubber surface of the clamping device protects the door while you work. Maintenance is easy because the chain bars on the SKS 130 do not need to be greased. Mortising lengths of 78 mm (3-1/16") and mortising widths of 14–18 mm (9/16" to 11/16") are possible with one cut, and wider/longer slots can also be made to the exact 230V millimeter by following up with multiple SKS 130 plunges.
SPECIFICATIONS Stroke/working travel ...... 6-7/8" Nominal no-load speed...... 5770 1/min Mortising depth...... 5-1/8" Nominal input ...... 1600 W Mortising width...... 9/16", 5/8", or 11/16" Weight...... 22 lbs Mortising length ...... 3-1/16" Motor ...... 230V
VISIT US AT WWW.TIMBERWOLFTOOLS.COM TIMBERWOLF TOOLS 2 Wilderness Drive P.O. Box 25 Newry, Maine 04261
OUR NEW DISTRIBUTION CENTER IS LOCATED AT: 3927 N Central Park Ave Chicago, IL 60618 CALL 800-869-4169 if you would like to make an appointment to visit us in Chicago.
VISIT WWW.TIMBERWOLFTOOLS.COM to see new videos of these tools in action.