Diplexers Models STVC : DPD2 : HR D2 : HR D3

Satellite

Diplexers Models STVC : DPD2 : HR D2 : HR d3

satellite/tv diplexer The STVC allows the combining or separating of CATV signals with satellite signals to a common cable.

model STVC

STVC InseRtiON LoSs RejectiON Frequency QC Limit TYP Frequency QC Limit TYP VHF/UHF Port 5-806 MHz 1.5 dB 1 dB 950-2150 MHz 30 dB 35 dB Satellite Port 950-2150 MHz 1.5 dB 1 dB 5-806 MHz 30 dB 35 dB

SATELLITE/TV DIPLEXER: High-Performance The DPD2 allows the combining (or separating if used in the reverse ) of Off-Air / CATV signals with satellite signals to a common cable. Filters harmonics in the off-air spectrum from satellite conversion devices. The DPD2 diplexer was specifically designed for Dish Network’s™ DP44 installations, requiring continuous 2 amp power passing. model DPD2

DPD2 InseRtiON LoSs RejectiON Frequency QC Limit TYP Frequency QC Limit TYP VHF/UHF Port 5-806 MHz 1.5 dB 1 dB 950-2150 MHz 40 dB 40-50 dB Satellite Port 950-2150 MHz 1.5 dB 1 dB 5-806 MHz 40 dB 40-50 dB

“3 Sigma” High-Performance diplexers Holland Electronics’ “3 Sigma” diplexers are specifically designed to work in MDU applications where high return loss and high isolation are critical for proper satellite system function. The HR D2 is intended for subscriber satellite drops. The HR D3’s additional isolation makes it an ideal choice as a trunk-grade diplexer. Solder-back sealed.

• Wideband Operation (15 MHz - 2150 MHz) • Higher Return Loss (15 dB @ 2 GHz Typical) • Ultra-Flat Response (±0.1 in any 24 MHz) • flat “F” Ports

model HR D2 model HR D3

2935 Golf Course Drive • Ventura, CA 93003 • (800) 628-4511 • FAX (805) 339-0230 • www.hollandelectronics.com 95 Satellite

passives Models hfs-* : hfs-*P : hfs-*D : HR S* : hr t* : hrv T* : hr tw*

HFS Series: High Frequency Broadband splitters * See page 85 for additional details. The HFS Series broadband splitters are an advanced design providing the lowest insertion loss from 5-2150 MHz while maintaining high isolation. The HFS-2/HFS-4 pass power to one port and the HFS-2P/HFS-4P pass power to all ports.

model HFS-2 model HFS-4 model HFS-2P model HFS-4P

HFS-*D Series: High Frequency Broadband splitters * See page 85 for additional details. Holland Electronics’ HFS-*D series high frequency splitters have been designed for residential and commercial applications. The diode-protected circuitry allows the DC power to pass from any output port to the input port and prevents DC backfeeding. Features

model HFS-2D model HFS-3D model HFS-4D

hr s series: diode steered satellite splitters * See page 87 for additional details. Our HR S* Series diode-steered splitters offer 130 RFI shielding. Features include solder-back housing and our patented round-pin design for improved connectivity.

model HR S2 model HR S3 model HR S4 model HR S8

high-performance taps * See page 87 for additional details. The “3 Sigma” taps were designed for MDU applications where high return loss and high isolation is required.

model HR T* model HRV T* model HR TW*

Applicable Patents - reference: S / U / V / W / X - See page 111 for patent details

96 2935 Golf Course Drive • Ventura, CA 93003 • (800) 628-4511 • FAX (805) 339-0230 • www.hollandelectronics.com Satellite

satellite radio accessories Models TPLXR : QPLEX : SR-4 : PRO-500 : CMP2000 : J6-940SMB-FF

XM or sirius AM / fM CATV, Sat. TV Antenna Antenna or Off-Air Signal Bring XM & Sirius Radio indoors! With XM/SIRIUS’ approved accessory product line

by Pixel Technologies you can... A PP RO VE D signal Combiner

Combine • Allow Satellite Radio to SHARE Exisiting Cable Satellite Radio, AM/FM & TV Signal onto same rg-6 cable • SPLIT Satellite Radio signals to Multiple Locations signal separator sat radio AM fM tV signal • INSTALL using standard shared RG-6 cable & F-connectors

XM or sirius tuner Receiver tV

Satellite Radio Product overview

Signal Combiner Signal Separator Amplified Signal Splitter Combine Audio & Video Signals Separate Signals To Each Receiver 1 Antenna / 4 Separate Signals

P/N: TPLXR P/N: QPLEX P/N: SR-4 Make installation easy by combining mul- Separates the signal after being com- Split one satellite radio signal up to four tiple signals onto one RG-6 line. bined through the Signal Combiner, times from a single satellite radio antenna. (P/N:TPLXR). Combine the following signals: Split up to 32 different signals with help of • XM / SIRIUS Satellite Radio Separate the following signals: other Pixel products. • AM / FM / HD Radio • XM / SIRIUS Satellite Radio • CATV / Sat. TV / Off-Air • AM / FM / HD Radio • CATV / Sat. TV / Off-Air

Home Satellite Radio Antenna XM Mini-Tuner & Dock Satellite Radio Adaptors Receive XM or Sirius Radio For XM-Ready Receivers

P/N: PRO-500 P/N: CMP2000 P/N: J6-940SMB-FF Professional high gain antenna system Allows any XM ready receiver to accept Allows the use of RG-6 cable and signals, eliminating the need to use an F-Connectors by use of a 50 ohm, • Receives XM or SIRIUS additional tuner. SMB-F adaptor.

• Can drive up to 200 ft. of RG-6 with no Antenna external amplification required

• Longer runs are possible with use of SMB-Plug Mini USB - Out SBA-1 high gain amplifier RF - In

XM Ready F-Female Receiver

2935 Golf Course Drive • Ventura, CA 93003 • (800) 628-4511 • FAX (805) 339-0230 • www.hollandelectronics.com 97 Satellite

equalizer & power inserter Models seq509 : 5satpl

99 110 119 worldDIRECT 101 103 SL5 10195

Satellite equalizer

SAT SAT SAT SAT SAT Model SEQ509 is used to reduce the lower Ka signal levels to 1 2 3 4 5 obtain the maximum undistorted output. Slope compensation in SEQ509 OUT OUT OUT OUT OUT the SEQ509 creates a positive slope signal for distribution. 1 2 3 4 5

Satellite typ. min. SAT SAT SAT SAT SAT DC equalizer 1 2 3 4 5 12 - 3 dB 13 - 4 dB Insertion Loss (54 - 2400 MHz) (54-2400 MHz) LAL205a Return Loss 15 dB 12 dB OUT OUT OUT OUT OUT 1 2 3 4 5 DC Inputs / Outputs 5 - 2400 MHz

20v 14v 20v 14v 20 24 22k 22k PS 24 5SATPL 2000 101º 110/119º FLEX EVEN 101º EVEN 119º ODD ODD

POwer inserter with poLARITY LOCKing capability The 5SATPL was designed to power DIRECTV™ satellite dishes. Locks the four or five LNB outputs for splitting to multi- switches. Also increases DC line voltage for longer cable runs. Ideal for usage on MDU trunk lines. TTT T T

power inserter typ. min.

Insertion Loss 15 dB 1 dB

Return Loss 12 dB 10 dB

Input Transformer 24 VDC, 2 Amp

Inputs / Outputs 250 - 2400 MHz

98 2935 Golf Course Drive • Ventura, CA 93003 • (800) 628-4511 • FAX (805) 339-0230 • www.hollandelectronics.com Satellite

SATELLITE distribution systems

satellite DISTRIBUTION SYSTEMS

• Designed Primarily for MDU Purposes

• Custom Built to Order

• Available to support up to 32/64 Tuners

• Residential and Commercial use

dish network™ example directv™ example

99 110 119 worldDIRECT SAT1 SAT2 SAT3 SAT4 101 103 SL5 10195

SAT SAT SAT SAT SAT 1 2 3 4 5 SAT SAT SAT SAT DC 1 2 3 4 LAL205a SEQ509 OUT OUT OUT OUT OUT 1 2 3 4 5 OUT OUT OUT OUT 1 2 3 4

SAT SAT SAT SAT SAT DC 1 2 3 4 5 PS 20v 20v 20v 20v 20V 20 4SPI 1200 LAL205a OUT OUT OUT OUT OUT POWER 1 2 3 4 5 DC INSERTER SAT SAT SAT SAT 1 2 3 4

20v 14v 20v 14v 20 24 DBS 22k 22k PS S4x4S4x4 Switch 24 SAT 1 SAT 2 SAT 3 SAT 4 INPUTS TO RECEIVERS SAT 1 SAT 2 1 2 3 4 2000 SAT 3 SAT 4 5SATPL 101º 110/119º FLEX EVEN 101º EVEN 119º ODD ODD BS BS BS BS BS BS BS BS DBS S4x4S4x4 Switch PORT 1 SAT 1 SAT 2 SAT 3 SAT 4 INPUTS TO RECEIVERS SAT 1 SAT 2 1 2 3 4 SWMBOX-xxx SAT 3 SAT 4 HRvT116 PORT 2

DBS S4x4S4x4 Switch PORT 1 SAT 1 SAT 2 SAT 3 SAT 4 INPUTS TO RECEIVERS SAT 1 SAT 2 1 2 3 4 SWMBOX-xxx SAT 3 SAT 4 HRvT112 PORT 2 DBS S4x4S4x4 Switch PORT 1 SAT 1 SAT 2 SAT 3 SAT 4 INPUTS TO RECEIVERS SAT 1 SAT 2 1 2 3 4 SWMBOX-xxx SAT 3 SAT 4 HRvT106 PORT 2 TTT T TTT T T

2935 Golf Course Drive • Ventura, CA 93003 • (800) 628-4511 • FAX (805) 339-0230 • www.hollandelectronics.com 99