Sony Ericsson T68 Mobile Phone
Total Page：16
File Type：pdf, Size：1020Kb
Plantronics Ltd - Released M3000 Pairing Instructions – Sony Ericsson T68 Mobile Phone Before pairing the Plantronics M3000 with the Sony Ericsson T68, please ensure both devices are fully charged according to the instructions in the respective User Guides. 1. Turn the Sony Ericsson T68 phone and the Plantronics M3000 headset ON. 2. On the T68, using the Joystick: i. Select “Connect” and press the joystick. ii. Scroll down to “Bluetooth” and press the joystick iii. Scroll down to “Operation Mode”, and press the joystick iv. Scroll down to “On” and press the joystick. Bluetooth is now be switched on in the phone. Note: If Bluetooth has already been activated, press the “No” Key (End Call button). 3. On the Plantronics M3000: i. Put the M3000 into pairing mode by press the “Volume Up” & “Call Control” buttons simultaneously until the Indicator light begins to flash alternate green and red. (see M3000 User Instructions). 4. On the Sony Ericsson T68 under “Bluetooth” menu: i. Scroll down to “Paired Devices” and press the joystick ii. The phone will display “Add Device”. Press the joystick. iii. Scroll to “Phone initiates” and press the joystick. iv. Scroll to “Headset” and press the joystick. v. The phone will display “Searching” vi. After a few moments the phone will display all the Bluetooth devices within range. Select the “M3000 by Plant” and press the joystick. vii. The phone will request the “Passkey:”. Enter 0000 using the keypad then press the joystick. The phone will display “Pairing” followed by “Pairing Successful”. viii. The phone will show “Name Tag:” M3000 by Plantronics. Press the joystick. ix. The phone will show “Added to Paired Devices” x. Use the “No” Key (End Call button) to return to the main menu. Your M3000 headset is now paired with the T68 phone. T68 M3000 pair rev002 1 24th July 2003 Plantronics Ltd - Released Making and Accepting Calls To accept an in-coming call via the M3000 Headset 1. An in-coming call will cause both the phone and the headset to ring. Note that there may be a delay of a few seconds between the phone ringing and the headset starting to ring. 2. When you hear the ringing tone in the M3000 headset, press the “Call Control” button to answer the call. If you press the “Call Control” button before the headset starts to ring the call may not be answered and an error tone will sound in the headset. Once you hear this tone you can then press the “Call Control” button to pick up the call. To end a call via the M3000 Headset The call can be ended either by pressing the “Call End / No” key on the T68 or by pressing the “Call Control” button on the M3000. To place a call using the keypad: 1. Dial the number as normal and press the “Call” key on the T68. The audio will automatically be transferred to the headset. To place a call using Voice Dialing with the M3000 Headset: NB: Before using the M3000 for voice dialling, ensure that you have followed the instructions in the Sony Ericsson T68 User Guide for voice dialling, and that you have recorded the names of the contacts you wish to call via voice dialling. Place a test call from the T68 using voice dialling to ensure that it is working before using the M3000 headset. 1. Press and hold the “Call Control” button on the M3000 until you hear a beep in the headset. After a moment you will hear another beep in the headset as a prompt for voice dialling and the phone display will show “After the tone, say a name or command” 2. State the name of the contact you wish to dial and the call will be placed. T68 M3000 pair rev002 2 24th July 2003 .