85 Smart Grip™, the Water Pump with automatic adjustment patented DIN ISO 8976

The adjustment procedure to match with the workpiece 85 acts self-controlled with the SmartGrip™. Position the pliers, press handles - ready!

85 01 250

››self-controlled adjustment ››locking lever for space saving ››self-locking on pipes and nuts: on the workpiece simply by transport with reliable closed no slipping on the workpiece squeezing handles. handles and low handforce required ››ideal for frequent changeover ››slim dimensions - good access ››gripping surfaces with special to workpieces of different size to the workpiece hardened teeth, approx 61 HRC ››one hand operation for right ››box-joint design ››guard prevents fingers being and left handed people pinched

Automatic adjustment: not time-consuming trial and error-adjusting of the correct opening size in case of differently sized workpieces (eg. the red high-lighted nuts and threaded connections). Everything done with a snatch

Locking lever for space saving Slim dimensions for access to the transport with reliable closed workpiece using one-hand operation handles

Part No. Head Handles Working capacity Weight Length for pipes for nuts mm inch mm (across flats) g 85 01 250 polished with non-slip plastic coating 1 1/4 36 340

47 86 Plier , Plier and in a single patented ››excellent for gripping, holding, pressing and bending The patented Plier Wrench is workpieces a multi functional fastening, ››for careful installation of 8686 03 180 gripping and holding tool finished-surface components with fast adjustment pushing ››zero backlash jaw surface a button. The high lever pressure prevents damage to ratio, parallel jaws without edges of sensitive components profile and infinitely variable adjustment guarantee a ››fast adjustment directly on the secure and smooth gripping workpiece by pushing a button 86 03 250 of the workpiece free ››no unintentional shift of the from any backlash. gripping jaws and no slipping of the joint ››replaces a complete set of wrenches ››parallel jaws allow infinitely 86 03 300 variable gripping of all widths to the specified maximum size ››the action of the jaws allows screwed connections to be tightened and released quickly 86 07 250 using the ratchet principle ››lever transmission greater than 10 - 1 for strong gripping power Working on plated fittings without ››also for tile breaking damage of the surface ››chrome vanadium electric steel, oil-hardened and tempered

Model 86 03 150: ››mini plier wrench for precision mechanics

27/35/46/60mm 86 07 250 scale for presetting the 86 03 300 enormous pressure and opening apart from the workpiece capacity up to 60 mm/ 2 3/8” allows application even on large size nuts

Compressive strain areas when force is Compressive applied on the Plier Wrench 86 03 250 - < strain < + and a conventional open end wrench

Works using the ratchet principle Fast adjustment by pushing a button Plier Wrench: zero backlash under Conventional open end wrench: edge pressure pressure causes surface damage

Part No. Head Handles Working capacity Dimensions Weight Length B1 B2 B3 mm inch mm mm mm mm g 86 03 150 nickel plated plastic coated 1 27 4.7 7.0 10.5 175 180 1 3/8 35 5.0 8.0 12.0 260 250 1 3/4 46 8.0 8.0 14.0 540 300 2 3/8 60 9.5 9.5 15.0 725 86 07 250 nickel plated plastic dipped insulated 1 3/4 46 8.0 8.0 14.0 600 VDE-tested

48 87 KNIPEX Cobra® XL/XXL, Pipe Wrenches and Water Pump Pliers patented

Cobra® XXL - Water Pump Plier and in 87 one tool. The optimized jaw design grips nuts and pipes up to 4 1/2“ with a weight and size of a 2“ Pipe Wrench. Besides the tremendous 87 01 560 capacity this heavy duty plier is adjustable quickly, securely and firmly directly on the workpiece.

87 01 400

››Pipe Wrench and Water Pump ››no unintentional shifting ››gripping surfaces with special Model 87 01 400: Plier in one tool ››non-slip joint hardened teeth, teeth hardness ››capacity of jaws for pipes up to ››self-locking on pipes and nuts: ››fine adjustment approx. 61 HRC: low wear and 3 1/2” at a total length of a no slipping on the workpiece; ››optimum lever action secure gripping 1 1/2” Pipe Wrench low handforce required ››can be used as a wrench in a lot ››chrome vanadium electric steel, ››20% less weight than a 1 1/2“ ››fast and firm adjustment of situations oil-hardened and tempered Pipe Wrench directly on the workpiece ››27 adjustment positions

Model 87 01 560: ››capacity of jaws for pipes up to 4 1/2” at a total length of a 2” Pipe Wrench ››40% less weight than comparable Pipe Wrenches ››20 adjustment positions

Fine adjustment by pushing a Optimized shape of jaws for gripping 87 01 560 jaw-capacity for pipes button: quick and comfortable pipes and nuts upto 4 1/2“ at a weight and length of a 2“ Pipe Wrench

Fast and firm adjustment directly on the workpiece Self-locking on pipes and nuts. No slipping on the workpiece and less handforce required

Part No. Head Handles Working capacity Weight Length for pipes for nuts mm inch mm (across flats) g 87 01 400 polished plastic coated 3 1/2 95 1190 560 4 1/2 120 2760

49 87 KNIPEX Cobra®, the HiTech Water Pump Pliers patented DIN ISO 8976 ››fast adjustment directly on the workpiece: fast and KNIPEX Cobra® - the HiTech comfortable handling 87 01 125 Water Pump Pliers. › 87 ›fine adjustment: ensures No more time-consuming optimum adjustment to test-adjusting of the correct differently sized workpieces and opening size. Just position 87 01 150 user-friendly handle position; the upper jaw to the 8701125: 13 adjustment positions workpiece, push button 8701150: 11 adjustment positions and close the lower jaw, ingeniously simple. 8701180: 11 adjustment positions 87 01 180 8701250: 25 adjustment positions 8701300: 30 adjustment positions 8701400: 27 adjustment positions ››secure catching of the hinge bolt: no unintentional shifting Model 87 01 150: 87 01 250 ››box-joint design: high stability ››mini- “Cobra”, because of double guide ››length only 150 mm ››self-locking on pipes and nuts: no slipping on the workpiece Model 87 01 125: and low handforce required ››for use in hobbies, housework 87 01 300 ››gripping surfaces with special and precision mechanics hardened teeth, teeth ››improved access in very hardness approx. 61 HRC: confined spaces low wear and secure gripping one-hand adjustment 87 02 250 ››guard prevents operators’ fingers being pinched ››favourable lever action: optimum transmission of force ››chrome vanadium electric steel, 87 05 250 oil-hardened and tempered

Self-locking on pipes and nuts. No slipping on the workpiece and less Fine adjustment by pushing a Fast and firm adjustment directly on handforce required button: quick and comfortable the workpiece

Part No. Head Handles Working capacity Weight Length for pipes for nuts mm inch mm (across flats) g 87 01 125 polished with non-slip plastic coating 1 27 85 150 1 1/4 30 135 180 1 1/4 30 160 250 2 46 300 300 2 3/4 60 515 400 polished plastic coated 3 1/2 95 1205 560 4 1/2 120 2740 87 02 180 polished with two colour 1 1/4 30 185 dual component handles 2 46 250 360 Operation on pneumatic pipes 300 2 3/4 60 565 87 03 250 chrome plated with non-slip plastic coated 2 46 320 87 05 250 chrome plated with two colour 2 46 340 dual component handles

50 87 KNIPEX Cobra®..matic, Water Pump Pliers for one-hand operation patented DIN ISO 8976 ››with automatic adjustment ››KNIPEX Cobra®..matic closes ››the plier can be opened and when pushing a button adjusted directly at the ››the integrated spring of the 87 workpiece with one hand automatic adjustment is shielded in the handles ››gripping surfaces with special hardened teeth, teeth hardness 87 11 250 approx. 61 HRC: low wear and secure gripping Part No. Head Handles Working capacity Weight ››chrome vanadium electric steel, Length for pipes for nuts oil-hardened and tempered mm inch mm (across flats) g 87 11 180 polished with non-slip plastic coating 1 1/4 30 170 250 1 1/2 36 300

87 Multiple Slip Joint Spanner patented ››for hexagonal screws and nuts width across flats 10 - 32 mm (3/8” - 1 1/4”); self-locking in The new KNIPEX Multiple Slip Joint Spanner is a the range of 17 - 32 mm 87 combination tool that offers (11/16” - 1 1/4”); no slip on the convenience of the workpieces; less effort required comfortable push-button ››replaces a complete set of adjustment on the workpiece 87 41 250 spanners and the function of an ››perfect fitting grip on bolt . heads and nuts with metric or Zero backlash pressure of the jaws avoids slipping on the imperial sizes; no rounding of threaded connection or a gripping surfaces rounding effect on the edges. ››the plier-type gripping Even rounded edges and movement of the jaws allows heavily coated workpieces threaded connections to be that do not offer a tightened and released quickly convenient gripping surface to conventional wrenches, using the ratchet principle can be loosened with the › ›ideal for tightening locknuts exceptionally powerful ››secure and tight grabbing of gripping jaws of the Multiple bolt heads with rounded edges, Slip Joint Spanner. Self-locking: no slip on workpieces; less effort required rusted nuts or heavily coated workpieces ››secure catch of the hinge bolt: ››one-hand fine adjustment by no unintentional shifting pushing a button with 15 ››box-joint design: high stability adjustment positions directly ››because of double guide on the workpiece for perfect ››guard prevents operators’ grip on different sized fingers being pinched workpieces and a favourable Multiple Slip Joint Working on tight nuts Fine adjustment by ››ergonomic handle design with position of the hand Spanner as the second with rounded edges pushing a button: non-slip plastic coating for ››chrome vanadium steel, spanner for tightening fast and comfortable locknuts comfortable grip particularly oil-hardened and tempered with large and tight nuts

Part No. Head Handles Capacity Weight Length mm mm inch g 87 41 250 polished plastic coated 10 - 32 3/8” - 1 1/4’ 315

51 87 KNIPEX Cobra® ES, the Extra Slim Water Pump Pliers patented DIN ISO 8976 ››box-joint design: high stability because of double guide Subject to the increasing ››firm grip also on flat material compactness of components 87 due to three-point rest and machines the workspace ››self-locking on pipes and nuts: becomes more confined. no slipping on the workpiece However, the requirements on the gripping force and 87 51 250 and low handforce required ››gripping surfaces with special capacity of on the other hand do not decrease. ››particularly good access to ››one-hand fine adjustment by hardened teeth, teeth hardness KNIPEX Cobra® ES allows the workpiece due to very slim pushing a button with 19 approx. 61 HRC: low wear and powerful gripping in confined construction of head and adjustment positions directly secure gripping areas. joint area on the workpiece for perfect ››favourable lever action: ››long, narrow jaws grip on different sized optimum transmission of force ››ideal for service and workpieces and a favourable ››guard prevents operators´ maintenance, equipment position of the hand fingers being pinched repair, automotive and ››secure catching of the hinge ››chrome vanadium electric general industry bolt: no unintentional shifting steel, oil-hardened and tempered

Very slim construction in the complete head and joint area (compared to conventional water pump pliers)

Optimum access to the workpiece. Grips nuts up to 42 mm (1 5/8”) Ideal for service and maintenance, across flats equipment repair, automotive and general industry

Part No. Head Handles Working capacity Weight Length for pipes for nuts mm inch mm (across flats) g 87 51 250 polished with non-slip plastic coating 1 1/4 42 325

89 Water Pump Pliers with groove joint

DIN ISO 8976 ››easy, convenient engagement ››gripping surfaces with special in 5 different positions due to hardened teeth, teeth hardness milled swivel approx. 61 HRC for tool length 89 ››non-slip joint 250 mm: low wear for ››can be used as a wrench in a lot secure grip of situations ››chrome vanadium electric steel, 89 01 250 ››all strain removed from the oil-hardened and joint screw, hence no wear on tempered pivot ››guard prevents operators’ Model 89 01 250: fingers being pinched ››self-locking on pipes and nuts: no slipping on the workpiece Part No. Head Handles Capacity Weight and low handforce required Length for pipes for nuts mm inch mm (across flats) g 89 01 200 polished plastic coated 1 1/4 30 230 250 1 5/16 36 335

52 88 KNIPEX Alligator® Water Pump Pliers DIN ISO 8976 ››box-joint design: high stability ››favourable lever action: because of double guide optimum transmission of force ››self-locking on pipes and nuts: ››gripping surfaces with special 88 no slipping on the workpiece; hardened teeth, teeth hardness low handforce required approx. 61 HRC: low wear and ››guard prevents operators’ secure gripping fingers being pinched ››chrome vanadium electric steel, 88 01 250 oil-hardened and tempered

88 02 250

Self-locking on pipes and nuts. No slipping on the workpiece and less handforce required 88 06 250

88 07 250 Optimized shape of jaws for gripping pipes and nuts

Part No. Head Handles Adjust- Capacity Weight Length ment for pipes for nuts positions mm inch mm (across flats) g 88 01 180 polished with non-slip plastic coating 7 1 1/4 30 185 250 9 2 46 320 300 7 2 46 505 88 02 180 polished with two-colour dual 7 1 1/4 30 215 250 component handles 9 2 46 355 300 7 2 46 555 88 03 180 chrome with non-slip plastic coating 7 1 1/4 30 185 250 plated 9 2 46 315 88 05 300 chrome with two-colour dual 7 2 46 555 plated component handles 88 06 250 chrome insulated with two-colour 9 2 46 375 plated dual component handles VDE-tested 88 07 250 chrome plated plastic dipped insulated 9 2 46 420 VDE-tested

90 Small Water Pump Pliers, with groove joint DIN ISO 8976 ››easy, convenient engagement ››non-slip joint in 4 different positions ››forged from chrome vanadium ››all strain removed from the electric steel, oil-hardened joint screw, hence no wear and tempered 90 on pivot 90 03 125

Part No. Head Handles Capacity Weight Length for pipes for nuts mm mm mm (across flats) g 90 01 125 polished plastic coated 17 14 100 90 03 125 chrome plated plastic coated 17 14 100

53 90 Hose and Pipe Cutters ››for cutting thin walled plastic ››with opening spring and pipes (e. g. armoured plastic locking lever pipes) and flexible hoses, also ››tool made of tough fibreglass 90 with fabric reinforcment, of reinforced plastic plastic and rubber up to 25 mm ››blade made of high-strength dia. / 1” exterior dia. special grade steel, ››not suitable for cutting cables oil-hardened and tempered ››exchangeable blade

90 20 185

Part No. Head Handles Cutting capacity Cutting Edge Weight Length mm mm g tough fibreglass reinforced 90 20 185 chrome plated plastic handles 25 25 172 90 29 185 spare blade for 90 20 185

90 Pipe Cutters for composite pipes and protective tubes ››for cutting composite pipes with a diameter of 12.0 - 25.0 mm and for cutting 90 flexible protective tubes with a diameter of 18.0 – 35.0 mm without damaging the pipe inside ››exchangeable blades ››a calibration arbor can be fitted, for example for Geberit 90 25 20 composite pipes with 11.5 and Clean cut of protective tubes 15.0 mm dia. 18 – 35 mm dia. ››galvanized head, with two-colour dual component handles ››high strength special grade steel, oil-hardened and Protective tube: Composite pipe: tempered to be cut with the to be cut with the front blades rear cutter

Part No. Head Handles Cutting capacity Weight composite pipes protective pipes Length Composite pipes of 12 – 25 mm mm mm mm g dia. are cut cleanly and without with two-clour dual deformation 90 25 20 galvanized component handles 12 - 25 18 - 35 210 325 90 29 01 spare blade for composite pipes

54 90 Lock Riveters ››for producing solid ››minimum handforce required connections of all metal section due to optimum lever sheets used in partition walls transmission 90 and false ceilings ››high strength special grade ››for U- and C-shaped sections steel, oil-hardened with max 1.2 mm metal and tempered (2 x 0.6 mm) ››for one hand operation

90 42 250

Setting the plier for connection of The punching tool is pressed through The sheet projections are bent Completed sheet connection two metal section sheets the metal section sheets

Part No. Head Handles Capacity Weight Length mm mm g with two-colour dual 90 42 250 burnished component handles max 1.2 (2x 0.6) 676

90 Sheet Metal Nibbler ››for cutting iron, copper or ››with chip breaker aluminium plate up to max. ››easy handling 1.2 mm thickness, plastic up to ››nickel plated head, with plastic 90 max. 2.0 mm thickness handles ››materials are cut without ››high strength special steel, deformation particularly stressed parts ››clean cut edges - no additional oil-hardened and tempered work needed on the cut profile 90 55 280

Part No. Head Handles Weight Length mm g 90 55 280 nickel plated with plastic handles 560 90 59 280 spare blade

90 55 280 notching and chip Notching without chip breaking breaking in one operation

55 90 Revolving Punch Pliers ››for punching holes in leather, textiles and plastic material ››with six interchangeable 90 punches: 2.0/2.5/3.0/3.5/ 4.0/5.0 mm dia. ››with opening spring and locking lever ››powder-coated for reliable protection against rust 90 70 220 ››punched and stamped from high-strength sheet steel

Part No. Finish Weight Length mm g 90 70 220 powder-coated 265 Interchangeable punches

92 Precision ››universally applicable

92 92 04 120/145: ››straight pattern ››blunt-wide tips 92 04 120 ››gripping surfaces with fine serration ››spring steel

92 34 36; ››straight pattern ››narrow 45˚ bent tips 92 34 36 ››gripping surfaces with fine 45° serration ››chequered handles

92 44 42: ››jewellers’ tweezers ››wide, round tips. approx.2mm 92 44 42 ››gripping jaws with fine crosswise serration (cross cut) ››chequered handles

Part No. Finish Weight Length mm g 92 04 120 mirror-finish nickel plated and polished 120 15 145 145 25 92 34 36 nickel plated 120 23 92 44 42 nickel plated 140 21

56 94 Cutter for Plastic Pipes, for electrical installation ››for clean cutting of plastic pipes (e.g. plastic clad pipes) with 6 - 35 mm dia. 94 ››not suitable for cutting cables ››blade is replaceable and can be retracted in any position 94 10 185 ››low force requirement due to special blade geometry and optimum transmission ››minimum operator fatigue due to ergonomic handle design and ratchet blade feed in stages ››die-cast aluminium body, red 6 - 35 mm dia lacquered

Part No. Finish Capacity Weight Length mm Ø mm g 94 10 185 6.0 - 35.0 560 94 19 185 spare blade 50

94 Mitre Shears, for plastic and rubber sections ››for crushing-free cutting of plastic, rubber and soft timber section; also for ribbon cable up 94 to 56 mm width ››exchangeable cutting base with fence angle for 45°-cuts and markings for 60°-, 75°- and 90°- cuts ››replaceable, conventional 94 35 215 trapezoidal blade ››with opening spring and locking device ››handles and blade mounting made of high-strength special grade steel

Part No. Head Handles Blade length Weight Length mm mm g 94 35 215 chrome plated plastic coated 56 400 94 19 215 spare blade 50

57 95 Combination/Cable Shears ››combination shears for cutting cardboard, plastics, aluminium, brass and copper foils 95 ››not suitable for steel wire or iron sheets ››precision ground, hardened blades 95 05 140 ››with opening spring and locking lever ››with guard ››adjustable screw joint ››blades made of stainless steel ››oil-hardened and tempered

95 05 190

Part No. Head Handles Weight Length mm g 95 05 140 bright polished with plastic handles 50 190 120

95 Cable Shears ››for cutting copper and aluminium cables, single and multiple wire 95 ››not suitable for steel wire and hard drawn copper conductors ››precision ground, hardened 95 11 165 blades ››clean and smooth cut without crushing and deformation ››easy cutting with one-hand Cut performed with a Diagonal operation Cutters: high effort required, inaccurate cut, considerable ››with guard deforming and crushing of the cable 95 12 165 ››adjustable screw joint, self-locking ››forged ››special tool steel, oil-hardened and tempered

Model 95 11/12 165: ››universal use for dismantling 95 16 165 and stripping

Part No. Head Handles Cutting capacity Weight Cut effected with Cable Shears: Length easy, clean cut without any deformation of the cable mm Ø mm mm² AWG g 95 11 165 burnished plastic coated 15 50 1/0 210 95 12 165 burnished with two-colour 15 50 1/0 245 dual component handles 95 16 165 chrome insulated with two-colour dual component 15 50 1/0 255 plated handles VDE-tested

58 95 Cable Shears ››not suitable for steel wire and Model 95 05 165: hard drawn copper ››cable shears for universal use; conductors cuts cables up to 10 mm dia. / 95 ››precision ground, hardened 24 mm² blades ››with opening spring and ››no crushing, slight deformation locking lever 95 05 165 of the cable only ››blades made of stainless steel ››with guard ››oil-hardened and tempered ››adjustable screw joint Model 95 06 230: ››for copper conductors single wire up to 16 mm², multiple wire up to 50 mm², fine strand up to 70 mm² and aluminium conductors multiple wire up 95 06 230 to 70 mm² ››easy cutting with one-hand operation due to high Part No. Head Handles Cutting capacity Weight transmission ratio Length ››stainless - special grade - steel, mm Ø mm mm² AWG g oil hardened and tempered 95 05 165 bright polished with plastic handles 10 24 3 115 ››VDE tested according to 95 06 230 bright polished plastic insulated 16 50 1/0 275 VDE-tested DIN EN/IEC 60900: 2004

95 Cable Shears with opening spring ››ergonomically designed for relief of the arm muscles ››for fatigue-reduced cutting of 95 copper and aluminium cables ››not suitable for steel wire and hard drawn copper 95 21 165 conductors ››oil-hardened, precision ground blades ››clean and smooth cut without crushing and deformation Oil-hardened precision ground ››easy cutting with one-hand blades for smooth and clean cuts operation 95 22 165 ››with guard ››adjustable self-locking screw joint ››special high-grade tool steel, forged, oil-hardened

95 26 165

A more comfortable way for Part No. Head Handles Cutting capacity Weight repetitive cutting Length mm Ø mm mm² AWG g 95 21 165 burnished plastic coated 15 50 1/0 215 95 22 165 burnished with two-colour 15 50 1/0 255 dual component handles 95 26 165 chrome insulated with two-colour dual component 15 50 1/0 275 plated handles VDE-tested

59 95 Cable Shears, with twin cutting edge patented ››for cutting copper and aluminium cables, single and KNIPEX Cable Shears with multiple wire twin cutting edge are › 95 ›not suitable for steel wire and designed for cutting cables hard drawn copper conductors up to 20 mm diameter. ››precision ground, hardened Even in case of large cable blades cross sections handles are › always in a favourable 95 11 200 ›clean and smooth cut without crushing and deformation position due to initial and final cut. ››easy cutting with one-hand operation ››initial and final cut (upper and lower blade) allows cables of up to 20 mm dia. to be cut ››low handforce required due to 95 16 200 favourable lever ratio and new blade geometry ››with guard ››adjustable screw joint, self-locking ››forged ››special tool steel, oil-hardened and tempered Part No. Head Handles Cutting capacity Weight Length mm Ø mm mm² AWG g 95 11 200 burnished plastic coated 20 70 2/0 295 95 16 200 chrome plated insulated with two-colour 20 70 2/0 345 dual component handles VDE-tested

Initial cut: using the upper cutting Final cut: if higher handforce is required, edge, an ergonomic handle opening is an additional cut can be done with the guaranteed even in case of large cable cutting edge profile near the joint. diameters Initial cut with the upper cutting edge – final cut with the lower cutting edge

60 95 Cable Cutters, Ratchet Action patented ››for cutting copper and aluminium cables, single and Cutting thicker cables usually multiple wire requires a high handforce. › 95 ›not suitable for steel wire and KNIPEX Ratchet Cable wire ropes Cutters facilitate this work ››precision ground, hardened by means of a two-stage blades ratchet drive and a handle ››clean and smooth cut without with support (model 95 31) crushing and deformation The cable cutter can be rested on a solid ground so 95 31 250 ››one-hand operation using that additional body weight ratchet principle can be applied to reduce ››little handforce required due to lower arm musculature optimum transmission ratio fatigue. ››two-stage ratchet drive for easy cutting ››simple handling as a result of low weight and compact design - can be used even in confined areas ››with guard ››special grade tool steel

95 31 280 Model 95 31 250/280: ››fixed handle with support area for putting down the plier when cutting

Model 95 31 280: ››suitable for aluminium sector cable up to 4 x 150 mm²

95 36 250

Part No. Head Handles Cutting capacity Weight Length mm Ø mm mm² MCM g 95 31 250 lacquered with two-colour 32 240 500 575 280 dual component handles 52 380 750 750 95 36 250 lacquered insulated with two-colour 32 240 500 560 280 dual component handles 52 380 750 735 VDE-tested 95 39 250 spare moving blade for 95 31 250 & 95 36 250 130 95 39 280 spare moving blade for 95 31 280 & 95 36 280 260

95 31 280 Large cutting capacity: Ratchet principle and two-stage maximum 52 mm dia. / 380 mm² ratchet drive for easier cutting.

61 97 KNIPEX MultiCrimp® ››one tool for the most common crimping applications ››quick and easy exchange of the 97 crimping dies without any additional tool ››for solder-free electrical connections ››repetitive, high crimping quality due to precision dies and integral lock with very fine adjustment (self-releasing 97 33 01 mechanism) ››interchangeable profiles are securely held in the tool ››head burnished, two-colour dual component handles

Model 97 33 01: ››crimping pliers with round magazine and 3 interchangeable profiles

Model 97 33 02: 97 33 02 ››Crimping pliers with round magazine and 5 interchangeable profiles

Secure attachment of the Crimping dies are marked Catch for exchange of dies in the pliers by reliable with a pictogram: visible crimping dies locking system in the magazine and the pliers Part No. Range of application Capacity Weight Length mm² AWG mm g 97 33 01 non-insulated, 0.5 - 6.0 20 - 10 250 755 open plug-type connectors

insulated terminals and 0.5 - 6.0 20 - 10 plug connectors

End Sleeves (ferrules) 0.25 - 6.0 23 - 10

97 33 02 non-insulated, 0.5 - 6.0 20 - 10 250 855 open plug-type connectors Round magazine with belt clip: interchangeable dies are always insulated terminals 0.5 - 6.0 20 - 10 and plug connectors ready to hand

End Sleeves (ferrules) 0.25 - 6.0 23 - 10

non-insulated terminals 0.5 - 10.0 20 - 7 and plug connectors

non-insulated butt connectors 1.5 - 10.0 15 - 7

62 97 Self-Adjusting Crimping Pliers for End Sleeves (ferrules) with lateral access, patented ››for crimping end sleeves (ferrules) according to The Self-Adjusting Crimping DIN46228 parts 1 + 4 Pliers for end sleeves › 97 ›for solder-free electrical (ferrules) adjusts connections automatically to the ››lateral loading of the end connector size desired in sleeves (ferrules) into the tool one profile. This means ››simple handling as a result of comfortable, reliable and fast crimping. 97 53 04 self-adjustment to the size of the end sleeve (ferrule) ››repetitive, high crimping square crimp quality due to integral lock (self-releasing mechanism) Model 97 53 04: 0.08 - 10.0mm² ››these tools have been set ››square crimping for optimum precisely (calibrated) in the contact areas in the factory connection ››optimum transmisson of force due to lever action for Model 97 53 14: fatigue-reduced operation ››heaxagonal crimping for ››high operation comfort thanks optimum positioning in to handy shape and low weight confined areas ››all stressed parts are made of 97 53 14 special steel, oil-hardened and tempered

hexagonal crimp

0.08 - 6.0mm²

Part No. Range of application Capacity Weight Length mm² AWG mm g 97 53 04 end sleeves 0.08 - 10 28 - 7 180 380 (ferrules)

97 53 14 end sleeves 0.08 - 6.0 28 - 10 180 400 (ferrules)

Square-crimped end sleeves (ferrules) ensure good contact zones regardless of the position in the terminal connector

The section shows clearly that the square crimping produces a better contact than the trapezoidal crimping. The hexagonal crimping comes close to the space saving round shape and guarantees optimum contact in narrow round terminal connectors, in contrast to square crimping of the same cross-section

63 97 KNIPEX PreciForce® Crimping Pliers ››for solder-free electrical connections conforming to The new Crimping Pliers standards provide an amazing high › 97 ›repetitive, standard conforming leverage despite the compact high crimping quality due to size and very good handling precision dies and integral lock - particularly favourable for (self-releasing mechanism) larger crimp cross sections. ››these tools have been set precisely (calibrated) in the 97 52 33 KNIPEX factory ››high transmission of force thanks to lever action for fatigue-reduced working ››good handling thanks to favourable handle position, low weight, short design and ergonomically shaped handles ››all stressed parts are made of special steel, oil-hardened and tempered 97 52 35 ››head burnished, handles with two-colour dual component sleeves

97 52 36

Part No. Range of application Capacity Weight Length mm² AWG mm g 97 52 30 non-insulated 1.5 - 10.0 15 - 7 220 490 butt connectors

97 52 33 non-insulated terminals 0.5 - 10.0 20 - 7 220 490 and plug conectors

97 52 34 non-insulated open 0.1 - 2.5 27 - 13 220 490 plug-type conectors 97 52 35 2.8+4.8mm / 2.8+6.3mm 0.5 - 6.0 20 - 10 220 490 97 52 36 insulated terminals 0.5 - 6.0 20 - 10 220 490 and connectors

97 52 38 end sleeve 0.25 - 6.0 23 - 10 220 490 (ferrules)

97 52 50 COAX-BNC- 220 490 connectors RG 58, 174, 188, 316

64 97 Self-Adjusting Crimping Pliers for End Sleeves (ferrules) with front loading, patented ››for crimping end sleeves (ferrules) according to DIN The Self-Adjusting Crimping 46228 parts 1 + 4 Plier for end sleeves › 97 ›for solder-free electrical (ferrules) with front and connections lateral loading allows secure ››front loading of the end sleeves and comfortable working (ferrules) into the tool even in confined areas. ››simple handling as a result of self-adjustment to the size of the end sleeve (ferrule) › ›with square crimping for ››optimum transmisson of force optimum contact areas in the 97 53 08 due to lever action for clamp connection fatigue-reduced operation › ›repetitive, high crimping ››high operation comfort thanks square crimp quality due to precision dies to handy shape and low weight and integral lock ››all stressed parts are made of 0.08 - 10.0mm² (self-releasing mechanism) special steel, oil-hardened and tempered Part No. Range of application Capacity Weight ››crimping from 0.08 - 10.0 mm² Length in one profile mm² AWG mm g ››end sleeves (ferrules) up to 97 53 08 end sleeves 0.08 - 10 28 - 7 190 475 (ferrules) 2.5mm² can also be loaded parallel from the side

Front loading of end 97 53 08: lateral loading Square crimping for sleeves (ferrules) of end sleeves (ferrules) optimum contact zones e. g. in switchboards e. g. in confined areas

97 Crimping Pliers for End Sleeves (ferrules) ››for crimping end sleeves (ferrules) according DIN 46228 parts 1 + 4 from 0.25 to 16 mm² 97 ››crimping in marked half-round dies for secure connections between the sleeve and the conductor ››9 extremely deep troughs with 97 71 180 conical side faces ››special tool steel, oil-hardened and tempered

Part No. Head Handles Range of application Capacity Weight Length mm mm² AWG g 97 71 180 polished plastic coated end sleeves 0.25 - 16.0 23 - 5 265 (ferrules)

65