technical data Single Unit Flashings EDW & EDL VELUX and are supplied with a flashing kit for single unit installation. There are two types of single unit flashing systems available. Codes are EDW and EDL.

EDW Flashing EDL Flashing EDW flashing is used for skylights and roof EDL flashing is used for skylights and roof windows installedbeing installed into tiled into roofs tile or and profiled low metal windows being installed into slate or shingle roofs profiledroofs. Concrete metal roofsor terracotta (such as tilescorrugated with standard iron max– typically 8mm thick.4-8mm “L” thick. shaped “L” sectionsshaped sectionsare provided are andprofiles custom can orbbe -used. not suitableCustom fororb metalprofile profiles metal thatprovided act as that soaker act as pieces soaker on pieces either onside either of the side suchroofing as Klip-Lok,can be used. Trimdeck). skylightof the or roof or . roof window. These soakersThese soakers sit under sit eachunder course each course of slate of or slate shingle or shingle and interlock and interlock with thewith course the course above. above. Minimum roof pitch for EDW/EDL flashing kits is 15 degrees.

Important considerations • MinimumOther Flashing roof pitch Types for EDW/EDL flashing kits is 15 degrees. • OtherFor certain Flashing roof Typestypes and degrees, it may be necessary to utilise a custom made flashing kit rather than Foruse certainthe VELUX roof flashing.types and Detailsroof pitches, are given it may on abe separate necessary sheet to utilisefor typical a custom custom made flashing flashing designs. kit rather • thanCustom use flashings the VELUX can flashing. be obtained Details from are metalgiven fabrication on a separate companies sheet for or typical skylight custom installers. flashing designs (pages 4.12 and 4.21). • Custom flashings can be obtained from metal fabrication companies or skylight installers. 3.213.10

VELU473_Binder-Pages-CH3_p9-26_AW.indd 2 21/07/2014 3:13 pm