National Centre for Sustainable Aquaculture (MPEDA, Ministry of Commerce & Industry, Government of ) House No: 70-1A-6/1, Boat Club Road, Ramanayyapeta, Kakianda - 533003 East Godavari District, . Telephone : +91 884 2350655 Fax : +91 884 2350649 E-mail : [email protected], Web: www.nacsampeda.org.in

NOTICE INVITING FOR QUOTATION

Ref. No: NaCSA/HQ/Tech/14/2019-20 Date 18-02-2020

The National Centre for Sustainable Aquaculture (NaCSA), under the administrative control of The Marine Products Export Development Authority (MPEDA), Kochi invites quotation from eligible bidders for the “for Providing and Fixing the Aluminium Partition Work ” at NaCSA Aqua one Centres located at Kudithapalem Village, Indukurupeta Mandalam, SPSR District, Andhra Pradesh. The details of requirements and terms & conditions are available in the NaCSA website: http://nacsampeda.org.in. The quotation shall be submitted to NaCSA, HQ Kakinada on or before 25-02-2020 at 18.00 PM . .

Sd/-

CEO – NaCSA

National Centre for Sustainable Aquaculture (MPEDA, Ministry of Commerce & Industry, Government of India) ISO 9001 : 2015 House No: 70-1A-6/1, Boat Club Road, Ramanayyapeta, Kakianda - 533003 East Godavari District, Andhra Pradesh. Telephone : +91 884 2350655 Fax : +91 884 2350649 E-mail : [email protected], Web: www.nacsampeda.org.in

NOTICE INVITING FOR QUOTATION

Inviting Quotation from eligible bidders for providing and fixing the aluminium partition works at NaCSA AOC Laboratory located at Kudhitapalem Village, Indukurupeta Mandalam, SPSR

Nellore District, Andhra Pradesh - 524313.

Introduction: The National Centre for Sustainable Aquaculture (hereinafter referred as “NaCSA) is a society registered under the AP Societies Registration Act 35 of 2001 under the administrative control of The Marine Products Exports Development Authority (hereinafter referred as “MPEDA’), Ministry of Commerce and Industry, Government of India. NaCSA with its Head office at Boat Club Road, Ramanayyapeta, Kakinada, East Godavari District, Andhra Pradesh is entrusted with the forming of clusters of shrimp farmers as primary task of promotion of export of marine products from India.

Job Description:

Providing and fixing the aluminium partition work of approximate 500 Sft with door, half glass and powder quoted (white) : Glass : 5 mm thickness, Novapan Board : 12 mm thickness Aluminium Sections : 2 ½ X 1 ½ (1.2 mm) sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of In-charge. Providing and fixing the new Door (half partition Glass door) in the existing partition with necessary Door Closer, Door Lock, Door Handles and Door Stopper etc.

General Instructions:

1. You are required to visit the sites to know about the requirement in person on any working day during office hours. 2. The material specified has to be strictly adhered to and the workmanship should be of superior quality. 3. You should make your own arrangements to transport the materials to the site. 4. Quality of work carried out shall jointly be taken by you/ your representative and NaCSA and payment shall be actual work one. 5. The work is to be completed with 25 days from issue of the work order. 6. Quantities show in this notice is approximate and payment shall be made as per actual quantities / measurements. 7. The responsibility for the safety, security and accounting of the materials and equipments brought or installed for completion of the work will remain with you till the completed work is handed over to NaCSA. 8. You are responsible for clearing the site of the debris, rubbish and the left over materials as and when accumulated once in every day so that the site is kept clean and orderly. No additional payment will be made for this. 9. The filled quotation form should be sealed and reached on or before on 25.02.2020 at 18.00 P.M. 10. In case of any clarification you may please contact the office at 0884-2350649 on any working day during the office hours (Monday to Saturday 9.00 A.M To 6.00 P.M)

Sd /- CEO, NaCSA