DOCSLIB.ORG

Road Rules 2014 Under the Road Transport Act 2013

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Road Rules 2014 Under the Road Transport Act 2013 New South Wales Road Rules 2014 under the Road Transport Act 2013 His Excellency the Governor, with the advice of the Executive Council, has made the following Rules under the Road Transport Act 2013. DUNCAN GAY, MLC Minister for Roads and Freight Explanatory note The objects of these Rules are: (a) to repeal the Road Rules 2008, and (b) to remake, with minor changes, the provisions of the repealed Rules. These Rules provide for: (a) road rules that are based on the Australian Road Rules approved by the Australian Transport Council and maintained by the National Transport Commission of the Commonwealth so as to ensure that the road rules applicable in this State are substantially uniform with road rules applicable elsewhere in Australia, and (b) other road rules to be observed by road users and other persons in this State in relation to matters that are not otherwise dealt with in the Australian Road Rules. These Rules also include new provisions dealing with the use of parking meters that require the entry of registration numbers. These Rules are made under the Road Transport Act 2013, including sections 23 (the general statutory rule-making power), 24, 25 and 26 and Schedule 1. These Rules comprise or relate to: (a) matters arising under legislation that is substantially uniform or complementary with legislation of the Commonwealth or another State or Territory, and (b) matters involving the substantial implementation of Agreed Reforms, within the meaning of the Inter-Governmental Agreement for Regulatory and Operational Reform in Road, Rail and Intermodal Transport entered into by the Commonwealth and each of the States and Territories (which came into effect on 15 January 2004), being Reforms that have been progressed in accordance with clause 11 of that Agreement. Published LW 28 November 2014 (2014 No 758) Road Rules 2014 [NSW] Contents Contents Page Part 1 Introductory Division 1 General 1 Name of Rules 16 2 Commencement 16 3 Objects of these Rules 16 Division 2 Some features of these Rules 4 Definitions—the Dictionary etc 16 5 Diagrams 17 6 Examples 17 7 Australian Road Rule not reproduced 17 8 Notes 17 9 Australian Road Rule not reproduced 17 10 Australian Road Rule not reproduced 17 10–1 NSW rule: determination of criminal responsibility 17 10–2 NSW rule: penalties and disqualifications for speeding offences 18 Part 2 Application of these Rules Division 1 Roads and road related areas 11 Rules apply to vehicles and road users on roads and road related areas 21 12 What is a road 21 13 What is a road related area 21 Division 2 Road users and vehicles 14 Road users 22 15 What is a vehicle 22 16 Who is a driver 22 17 Who is a rider 22 18 Who is a pedestrian 23 19 References to driver includes rider etc 23 Part 3 Speed limits 20 Obeying the speed limit 24 21 Speed limit where a speed limit sign applies 24 21–1 NSW rule: school bus stop zone sign is speed limit sign 25 22 Speed limit in a speed limited area 26 23 Speed limit in a school zone 27 24 Speed limit in a shared zone 27 24–1 NSW rule: speed limits for learner and provisional licence holders 28 24–2 NSW rule: speed limit on Lord Howe Island 29 24–3 NSW rule: speed limit when bus displaying when lights flash speed limit sign 29 24–4 NSW rule: speed limits for small motor bikes during periods of darkness 30 25 Speed limit elsewhere 30 25–1 NSW rule: drivers to which Part does not apply 30 Page 2 Published LW 28 November 2014 (2014 No 758) Road Rules 2014 [NSW] Contents Page Part 4 Making turns Division 1 Left turns 26 Application of Division to roundabouts, road related areas and adjacent land 32 27 Starting a left turn from a road (except a multi-lane road) 32 28 Starting a left turn from a multi-lane road 33 29 Making a left turn as indicated by a turn line 36 Division 2 Right turns 30 Application of Division to certain right turns 37 31 Starting a right turn from a road (except a multi-lane road) 37 32 Starting a right turn from a multi-lane road 39 33 Making a right turn 40 Division 3 Hook turns at intersections 34 Making a hook turn at a hook turn only sign 42 35 Optional hook turn by a bicycle rider 43 36 Bicycle rider making a hook turn contrary to no hook turn by bicycles sign 44 Division 4 U-turns 37 Beginning a U-turn 45 38 Giving way when making a U-turn 45 39 Making a U-turn contrary to a no U-turn sign 45 40 Making a U-turn at an intersection with traffic lights 46 41 Making a U-turn at an intersection without traffic lights 46 42 Starting a U-turn at an intersection 46 43 (Repealed) 47 Part 5 Change of direction and stop signals Division 1 Change of direction signals 44 Division does not apply to entering or leaving a roundabout 48 45 What is changing direction 48 46 Giving a left change of direction signal 49 47 How to give a left change of direction signal 49 48 Giving a right change of direction signal 49 49 How to give a right change of direction signal 50 50 How to give a right change of direction signal by giving a hand signal 50 51 When use of direction indicator lights permitted 50 Division 2 Stop signals 52 Division does not apply to bicycle riders or certain tram drivers 51 53 Giving a stop signal 51 54 How to give a stop signal 51 55 How to give a stop signal by giving a hand signal 51 Page 3 Published LW 28 November 2014 (2014 No 758) Road Rules 2014 [NSW] Contents Page Part 6 Traffic lights, traffic arrows and twin red lights Division 1 Obeying traffic lights and traffic arrows 56 Stopping for a red traffic light or arrow 52 57 Stopping for a yellow traffic light or arrow 53 58 Exceptions to stopping for a red or yellow traffic light 55 59 Proceeding through a red traffic light 55 60 Proceeding through a red traffic arrow 55 60A Proceeding through a bicycle storage area before a red traffic light or arrow 56 61 Proceeding when traffic lights or arrows at an intersection change to yellow or red 56 Division 2 Giving way at traffic lights and traffic arrows 62 Giving way when turning at an intersection with traffic lights 57 63 Giving way at an intersection with traffic lights not operating or only partly operating 58 64 Giving way at a flashing yellow traffic arrow at an intersection 59 65 Giving way at a marked foot crossing (except at an intersection) with a flashing yellow traffic light 59 Division 3 Twin red lights (except at level crossings) 66 Stopping for twin red lights (except at level crossings) 59 Part 7 Giving way Division 1 Giving way at a stop sign, stop line, give way sign or give way line applying to the driver 67 Stopping and giving way at a stop sign or stop line at an intersection without traffic lights 61 68 Stopping and giving way at a stop sign or stop line at other places 63 69 Giving way at a give way sign or give way line at an intersection (except a roundabout) 64 70 Giving way at a give way sign at a bridge or length of narrow road 66 71 Giving way at a give way sign or give way line at other places 66 Division 2 Giving way at an intersection without traffic lights or a stop sign, stop line, give way sign or give way line applying to the driver 72 Giving way at an intersection (except a T-intersection or roundabout) 67 73 Giving way at a T-intersection 70 Division 3 Entering or leaving road related areas and adjacent land 74 Giving way when entering a road from a road related area or adjacent land 73 75 Giving way when entering a road related area or adjacent land from a road 74 Division 4 Keeping clear of and giving way to particular vehicles 76 Keeping clear of trams travelling in tram lanes etc 75 77 Giving way to buses 76 78 Keeping clear of police and emergency vehicles 77 Page 4 Published LW 28 November 2014 (2014 No 758) Road Rules 2014 [NSW] Contents Page 79 Giving way to police and emergency vehicles 77 79–1 NSW rule: interfering or interrupting funeral cortege or authorised procession 77 79–2 NSW rule: precedence at ferries, punts, bridges or railway crossings 77 Division 5 Crossings and shared zones 80 Stopping at a children’s crossing 78 81 Giving way at a pedestrian crossing 80 82 Overtaking or passing a vehicle at a children’s crossing or pedestrian crossing 81 83 Giving way to pedestrians in a shared zone 82 Division 6 Other give way rules 84 Giving way when driving through a break in a dividing strip 82 85 Giving way on a painted island 83 86 Giving way in median turning bays 84 87 Giving way when moving from a side of a road or a median strip parking area 85 Part 8 Traffic signs and road markings Division 1 Traffic signs and road markings at intersections and other places 88 Left turn signs 86 89 Right turn signs 86 90 No turns signs 87 91 No left turn and no right turn signs 87 92 Traffic lane arrows 88 Division 2 Traffic signs and road markings generally 93 No overtaking or passing signs 89 94 No overtaking on bridge signs 90 95 Emergency stopping lane only signs 90 96 Keep clear markings 91 97 Road access signs 91 98 One-way signs 92 99 Keep left and keep right signs 93 100 No entry signs 93 101 Hand-held stop signs 94 101A Safety ramp and arrester bed signs 94 Division 3 Signs for trucks, buses and other large vehicles 102 Clearance and low clearance signs 94 103 Load limit signs 95 104 No trucks signs 95 105 Trucks must enter signs 96 106 No buses signs 96 107 Buses must enter signs 97 108 Trucks and buses low gear signs 97 Page 5 Published LW 28 November 2014 (2014 No 758) Road Rules 2014 [NSW] Contents Page Part 9 Roundabouts 109 What is a roundabout 99 110 Meaning of halfway around a roundabout 99 111 Entering a roundabout from a multi-lane road or a road with 2 or more lines of traffic
Load more

Recommended publications
  • (Keeping Safe Distances from Bicycles) Bill 2014 Second Reading Speech Hon Lynn Maclaren MLC - 20 March 2014
    Road Traffic Amendment (Keeping Safe Distances from Bicycles) Bill 2014 Second Reading Speech Hon Lynn MacLaren MLC - 20 March 2014 I move that the Bill be now read a second time. Cyclists need a protective buffer when sharing roads with motorists. Current Western Australian road rules require drivers of motor vehicles to allow ‘sufficient’ overtaking distance when passing a bicycle rider. ‘Sufficient’ is an inadequate and unclear description that has repeatedly failed to protect bicycle riders. Amendments to road rules to specify a minimum distance are critical to improving the safety of bicycle riders. As specified in the Road Traffic Code 2000, a safe passing distance between a cyclist and a motor vehicle is considered to be “a sufficient distance to avoid a collision with that vehicle or to avoid obstructing the path of that vehicle.” 1 In addition, a safe distance behind a vehicle is considered to be a distance at which it “will enable the driver to stop the vehicle in an emergency with safety, and without running into the vehicle in front of him or her.”2 Legislative amendment, with appropriate education and enforcement, to mandate a minimum distance that motorists must keep from bicycle riders is currently the single most important action needed to reduce bicycle rider fatalities. There is an ethical issue when comparing dangerous behaviour by motorists to risky behaviour by cyclists. The driver endangers the cyclist, not vice versa, and it is rare for a cyclist or pedestrian to injure another road user. As reported on the ABC’s 7.30 programme last Friday night, there's no doubt who comes off second best when a car and a bike collide.
    [Show full text]
  • AUSTRALIAN ROAD RULES AMENDMENT REGULATIONS 1999 (No
    AUSTRALIAN ROAD RULES AMENDMENT REGULATIONS 1999 (No. 2) Regulatory Impact Statement September 1999 Report to: National Road Transport Commission Prepared by: R Ungars Report to: National Road Transport Commission Australian Road Rules Amendment Regulations 1999 (No. 2) Regulatory Impact Statement Prepared by: R Ungars ISBN: 0 642 54440 9 REPORT OUTLINE Date: September 1999 ISBN Number: 0 642 54440 9 Title and Sub-title: Australian Road Rules Amendment Regulations 1999 (No.2) Performing Organisation and Address Details Mr R Ungars 9 Yarilla Road SASSAFRAS VIC 3787 NRTC Contact: Ian Shepherd, Senior Project Manager, Phone (03) 9321 8444 Type of Report: Regulatory Impact Statement Objectives: To ensure that the Australian Road Rules clearly reflect the principles and policy agreed to during the extensive consultation process leading to their acceptance by the Australian Transport Council in January 1999, and enable implementation of the Rules by all States and Territories from 1 December 1999. NRTC Programs: Implementation of Reforms. Key Milestones: Approval of the Australian Road Rules by the Australian Transport Council in January 1999. Consideration of amendments to the Rules by representatives of all jurisdictions, meeting as the Australian Road Rules Maintenance Group during March to September 1999 and Parliamentary Counsel of each State and Territory. Abstract: Amendments are required to clarify the intent of particular provisions in the Australian Road Rules; to incorporate corrections and rectify omissions largely of a minor nature; to enable the finalisation and subsequent publication of the amended Australian Road Rules, so that States and Territories can proceed without delay to their implementation on 1 December 1999; and to ensure that the Australian Road Rules, when implemented, make the maximum contribution to road safety and the efficient movement of traffic on Australia’s roads.
    [Show full text]
  • Traffic Signal Design Section 10 - Signs
    Traffic signal design Section 10 - Signs The traffic signal design guidelines have been developed to assist in designing traffic control signals. The guidelines are to comprise 16 sections and 5 appendices. These are initially being released individually and in no specific order. The sections which are to be released are as follows: Part Title Section 1 Investigation Section 2 Warrants Section 3 Design Process Section 4 Plan Requirements Section 5 Geometry Section 6 Pavement Marking Section 7 Phasing and Signal Group Display Sequence Section 8 Lanterns Section 9 Posts Section 10 Signs Section 11 Detectors Section 12 Controller Section 13 Provision for Future Facilities Section 14 Signalised Mid-block Marked Footcrossings Section 15 Special Situations Section 16 References Appendix A Design Plan Checklist Appendix B Traffic Signal Symbols Appendix C Location and Function of Lanterns Appendix D Location and Dimensions of Components Appendix E Left Turn on Red Appendix F Level Crossing Interface – Concept of Operations Appendix G Level Crossing Interface – Traffic Signal Design Guidance To determine which sections are currently available go to: www.rta.nsw.gov.au/doingbusinesswithus/downloads/technicalmanuals/trafficsignaldesign_dl1.html The information contained in the various parts is intended to be used as a guide to good practice. Discretion and judgement should be exercised in the light of the many factors that may influence the design of traffic signals at any particular site. The guidelines make reference, where relevant, to current Australian Standards and are intended to supplement and otherwise assist in their interpretation and application. Traffic Signal Design Section 10 SIGNS Special Note: As of 17 January 2011, the RTA is adopting the Austroads Guides (Guide to Traffic Management) and Australian Standards (AS 1742, 1743 & 2890) as its primary technical references.
    [Show full text]
  • Information Sheet – Road Train Speed Limits – Including B-Triples
    10 June 2020 // FSCP0024 Information Sheet – Road Train Speed Limits – Including B-triples Purpose However, the maximum speed a road train may This information sheet outlines the speed limits travel at is determined by the State or Territory imposed on road trains (including B-triples) in all Road Authority. jurisdictions in Australia. Table 1 provides maximum speed limits in each jurisdiction. What is a road train? A road train means – Signposted speed limits Road trains must not exceed a posted speed limit a) a B-triple; or applying on a given road. b) a combination, other than a B-double, Road trains must obey the lesser of the signposted consisting of a motor vehicle towing at speed limit and the maximum speed permitted for least 2 trailers, excluding any converter road trains in each state or territory road authority dolly supporting a semitrailer. (see overleaf). Operation under a notice New South Wales and Victoria apply speed Figure 1 Portal image of a B-triple road train restrictions for road trains in the National Class 2 Background Road Train Operator’s Guide. The maximum permitted road speed in both States is 90km/h. Regulation for roads rules (such as speed limits), licensing and registration are a state and territory All other State and territory authorities apply government responsibility. The Heavy Vehicle maximum road train speed limits under road rules National Law (HVNL) does not provide the National or state and territory legislation. Heavy Vehicle Regulator (NHVR) the power to Operators of road trains operating under a Notice exempt an operator from complying with the road must comply with the conditions of operation listed rules.
    [Show full text]
  • Motorised Mobility Scooters
    Information Sheet 8 Motorised mobility scooters © South Australian Government 2012 Moving Right Along: Obligations and Opportunities for Older Drivers encourages safer, greener and more active travel for older South Australians. It comprises a series of Information Sheets about fitness to drive and legal responsibilities, driver assessments, ideas for maintaining the ability to drive safely and planning for the time when you, a family member or friend will decide to drive less or stop driving altogether. Motorised mobility scooters Choosing a motorised Being safe mobility scooter Motorised mobility scooters improve Know, understand and practice using all mobility and independence for people It is important that you find out as much as of the scooter controls and functions. who have difficulty when moving due you can before choosing a mobility scooter Have the scooter regularly serviced and to disability, illness or injury. They are also for your own use. It should suit your specific undertake safety checks on a regular known as mobility scooters, motorised needs and abilities, and the specifications basis. of the vehicle you choose should comply wheelchairs or ‘gophers’. Plan safe routes that provide footpaths with the Australian Road Rules, the and safe crossing points when travelling Road Traffic Act (1961) and/or the Motor Motorised mobility scooters to places you usually visit. Vehicles Act (1959). and your health Be visible – wear brightly coloured Check with a health practitioner about For advice and information, contact: clothing, attach a flag to your scooter. your suitability to use a mobility scooter. The Independent Living Centre. This is a Consider fitting headlights for extra You do not have to obtain a Driver Medical visibility.
    [Show full text]
  • National Enforcement Guidelines for Automated Vehicles November 2017
    National enforcement guidelines for automated vehicles November 2017 i Outline Title National enforcement guidelines for automated vehicles Type of report Guidelines Purpose To assist police to enforce road traffic laws in relation to automated road vehicles. Abstract These national enforcement guidelines provide guidance about how the requirement of proper control in Australian Road Rule 297 should apply to vehicles with automated functions. The guidelines also confirm that the human driver is responsible for compliance with road traffic laws when a vehicle has conditional automation engaged at a point in time. Key words Vehicle with automated functions, national enforcement guidelines, Australian Road Rules Contact National Transport Commission Level 3/600 Bourke Street Melbourne VIC 30000 Ph: (03) 9236 5000 Email: [email protected] www.ntc.gov.au Version 1 ISBN 978-0-6480157-3-4 ii Contents Outline ii 1. Purpose 1 2. Objectives 1 3. Scope 1 3.1 Matters in scope 1 3.2 Matters out of scope 2 4. Levels of driving automation 3 Automated parking assistance features 4 5. Responsibility for compliance with road traffic laws and examples of behaviours indicating proper control 5 6. Enforcement agency interaction with automated vehicles 7 6.1 How a human driver could demonstrate vehicle automation was engaged and the level of automation engaged 7 6.2 Other offences that may apply instead of a breach of Road Rule 297 8 iii 1. Purpose The purpose of these national enforcement guidelines is to: 1. provide guidance about how the requirement of proper control in Australian Road Rule 297 should apply to vehicles with automated functions 2.
    [Show full text]
  • ACT Road Rules Handbook
    JANUARY 2017 The ACT Road Rules Handbook is written Other available publications: and compiled by the Chief Minister, • ACT Heavy Vehicle Drivers’ Handbook Treasury and Economic Development Directorate. The assistance of the • ACT Older Drivers’ Handbook following in bringing together this While this handbook is predominantly a handbook is gratefully acknowledged: training tool for learner drivers, it is also • Infant Restraint Loan Service intended to assist ACT or visiting drivers, • Australian Driver Trainers’ however it is intended as a guideline only. Association - ACT Branch Legislative provisions are contained in the Australian Road Rules 2012 and related • NSW Transport Roads and Maritime Acts and Regulations. Services. For further information please see page 15 of this handbook. ISBN 0 642 60329 4 © Australian Capital Territory, Canberra, 2017 This work is copyright. Apart from any use as permitted under the Copyright Act 1968, no part may be reproduced by any process without written permission from the Chief Minister, Treasury and Economic Development Directorate, ACT Government, GPO Box 158, Canberra ACT 2601. Produced by Publishing Services. Publication No. 161374 http://www.act.gov.au Telephone: Access Canberra 13 22 81 ii Foreword This ACT Road Rules Handbook contains practical information to help you master the road rules and obtain the other knowledge you will need to pass the Road Ready Course and the Road Rules Knowledge Test. Most importantly, the information in this publication could save your life. The Handbook is essential reading for anyone learning to drive. It’s also a great resource for experienced drivers who want to keep up to date with changes to road rules and is a valuable source of information for interstate or overseas visitors who plan to drive in the ACT.
    [Show full text]
  • Drive Safe Handbook
    Drive Safe A handbook for Western Australian road users A Message from the Chief Executive Officer (CEO) of the Department of Transport This handbook is a comprehensive guide to the road rules that apply in Western Australia. It is written in an easy to understand format and designed primarily to help new drivers prepare for a lifetime of safe driving. If you are a new driver, this book contains the information you will need to obtain your learner’s permit. The laws explained in this book are the major ones that are contained in the Road Traffic Code 2000 and Road Traffic (Vehicles) Regulations 2014. However, drivers should be familiar with all traffic laws and a copy of the relevant rules and regulations can be viewed on the internet at www.slp.wa.gov.au or purchased from the State Law Publisher. To earn your driver’s licence will require a great deal of effort and most importantly, many hours of practical experience driving with a supervisor. Those who have already obtained their licence will still need to refer to this handbook regularly and to the Road Traffic Code 2000 to ensure that their understanding of the road rules is up to date. While a good knowledge of traffic laws will help you drive more safely, research shows that human behaviour is a factor in over 90 percent of road crashes, so it is important that the theoretical knowledge of the correct use of our roads is translated into responsible and careful driving. The big killers continue to be speeding, drinking and driving, failing to wear a seat belt and driving when tired.
    [Show full text]
  • The Driver's Handbook
    $10 including GST the driver’s handbook In this book: • your road safety responsibilities • the road rules • drivers and licensing • vehicles and registration • fitness to drive • road rules for bicycle riders. The Driver’s Handbookk provides an overview of the road rules and the laws for driver’s licences and registering a vehicle in South Australia. The information contained within this handbook has been prepared to help you become better informed about road safety, road rules, drivers and licensing and vehicle registration. It has been written in plain, easy to understand language and should not be taken as a precise interpretation of the law. It is not intended to be a substitute for the legislation made by Parliament. Recent changes in laws may not be reflected. Diagrams are for illustrative purposes and are not to scale. If you require further information, please call 13 10 84. Information on the relevant South Australian legislation may be obtained from www.legislation.sa.gov.au Road crash statistics are based on averages from 2013-2017. references • The Driving Companion (for Learner Drivers) • Australian Road Rules • Road Traffic Act (1961) and Regulations • Motor Vehicles Act (1959) and Regulations • Cycling and the Law © Government of South Australia. This work is licensed under a Creative Commons Attribution 3.0 Australia Licence. A summary of the licence terms is available from http://creativecommons.org/licenses/by/3.0/au/deed.en First published in Australia 2000. MR200 June 2019 ISMF Classification – PUBLIC – I3 – A3 WELCOME The Driver’s Handbook provides an overview of the road rules and the laws for driver’s licences and registering a vehicle in South Australia.
    [Show full text]
  • Australian Road Rules
    Australian Road Rules as at 19 March 2018 As approved by the Transport and Infrastructure Council Published by the Parliamentary Counsel’s Committee This is a consolidated version of the Australian Road Rules. These Rules are a national model law and are intended to provide the basis for nationally consistent road rules. These Rules do not, by themselves, have any legal effect. Australian Road Rules Australian Road Rules Contents Part 1—Introductory 17 Division 1—General 17 1 Australian Road Rules 17 2 Commencement 17 3 Objects of the Australian Road Rules 17 Division 2—Some features of the Australian Road Rules 18 4 Definitions—the dictionary etc 18 5 Diagrams 18 6 Examples 18 7 Headings 18 8 Notes 18 9 Reader’s Guide 18 10 Offences 19 Part 2—Application of the Australian Road Rules 20 Division 1—Roads and road-related areas 20 11 Australian Road Rules apply to vehicles and road users on roads and road-related areas 20 12 What is a road 20 13 What is a road-related area 20 Division 2—Road users and vehicles 22 14 Road users 22 15 What is a vehicle 22 16 Who is a driver 22 17 Who is a rider 22 18 Who is a pedestrian 22 19 References to driver includes rider etc 23 Part 3—Speed-limits 24 20 Obeying the speed-limit 24 21 Speed-limit where a speed-limit sign applies 24 22 Speed-limit in a speed-limited area 25 23 Speed-limit in a school zone 26 24 Speed-limit in a shared zone 27 25 Speed-limit elsewhere 27 Part 4—Making turns 29 Division 1—Left turns 29 26 Application of Division to roundabouts, road-related areas and adjacent land 29 27
    [Show full text]
  • Traffic Regulations – Australian Road Rules 60 SCHEDULE 3 Regulation
    Traffic Regulations – Australian Road Rules SCHEDULE 3 Regulation 71 AUSTRALIAN ROAD RULES PART 1 – INTRODUCTORY Division 1 – General 1 Australian Road Rules 2 Commencement 3 Object of the Australian Road Rules Division 2 – Some features of the Australian Road Rules 4 Definitions – the dictionary etc 5 Diagrams 6 Examples 7 Headings 8 Notes 9 Reader's Guide 10 Offences PART 2 – APPLICATION OF THE AUSTRALIAN ROAD RULES Division 1 – Roads and road-related areas 11 Australian Road Rules apply to vehicles and road users on roads and road-related areas 12 What is a road 13 What is a road-related area Division 2 – Road users and vehicles 14 Road users 15 What is a vehicle 16 Who is a driver 17 Who is a rider 18 Who is a pedestrian 19 References to driver includes rider etc PART 3 – SPEED-LIMITS 20 Obeying the speed-limit 21 Speed-limit where a speed-limit sign applies 22 Speed-limit in a speed-limited area 23 Speed-limit in a school zone 60 Traffic Regulations – Australian Road Rules 24 Speed-limit in a shared zone 25 Speed-limit elsewhere PART 4 – MAKING TURNS Division 1 – Left turns at intersections 26 Division does not apply to certain turns 27 Starting a left turn from a road (except a multi-lane road) 28 Starting a left turn from a multi-lane road 29 Making a left turn as indicated by a road marking Division 2 – Right turns (except hook turns) at intersections 30 Division does not apply to certain turns 31 Starting a right turn from a road (except a multi-lane road) 32 Starting a right turn from a multi-lane road 33 Making a right turn
    [Show full text]
  • Speed Limit Guideline for South Australia
    Speed Limit Guideline for South Australia Safety and Service Division TRAFFIC MANAGEMENT Publications Speed Limit Guideline for South Australia AMENDMENT RECORD Version Page Date Amendment Description Name Endorsed by DPTI’s Traffic Operations 1 15 / 8 / 2017 I Hunt and Safety Strategy This document has been prepared by Traffic Engineering Standards, Traffic Operations of the Department of Planning, Transport and Infrastructure (DPTI). It has been approved and authorised for use by Councils, DPTI and its authorised agents by: Manager, Traffic Services 15 / 8 / 2017 The content of this document has been adapted from the NSW Speed Zoning Guidelines (2011). DPTI acknowledges the valuable contribution of Transport for NSW’s Centre for Road Safety to the development of this South Australian Guideline. Extracts may be reproduced providing the subject is kept in context and the source is acknowledged. Every effort has been made to supply complete and accurate information. This document is subject to continual revision and may change. Feedback from users of this document is encouraged for consideration in the next revision. Comments can be emailed to [email protected]. For information regarding the interpretation of this document please contact: Traffic Engineering Standards, Traffic Operations, Department of Planning, Transport and Infrastructure Email: [email protected] K-Net Doc: 10375858 UNCONTROLLED COPY WHEN PRINTED Version No.: 1 Issue Date: 15/08/2017 Doc. Owner: Traffic Engineering Standards Speed Limit Guideline
    [Show full text]