Time Switches (Digital/Analogue), Sun Relays & Accessories

Time Switches (digital/analogue), Sun Relays & Accessories

Product Information July 2012

EATON Art.# EATON type designation Description Sun relay with integrated time switch 167377 SRCD1CO and external light sensor (2 - 2000 lx) Analogue sun relay with external light sensor 167378 SRSD1COW (2 - 2000 lx) Analogue sun relay with external light sensor 167375 SRSD1NO (2 - 100 lx) Analogue sun relay with integrated light sensor 167376 SRSW1NO for wall mounting (2-2000 lx) 167384 TSADCF DCF Antenna 167385 TSAGPSKIT Set: GPS antenna & power supply 167387 TSAMEM Memory key for OBELISK Software 167386 TSAMEMKIT PC Set: Interface, Software & memory key Digital time switch with week program 167379 TSDW1CO 1 channel Astronomical time switch with week program 167381 TSDW1COA 1 channel Digital time switch with week program 167382 TSDW1CODG 1 channel (connectable with external antenna) Digital time switch with week program 167383 TSDW1COMIN 1 channel, 1 module slim Digital time switch with week program 167380 TSDW2CO 2 channels Analogue time switch day program 167390 TSQD1CO 1 channel, quartz operated Analogue time switch with day program 167388 TSQD1NO 1 channel, quartz operated Analogue time switch week program 167392 TSQW1CO 1 channel, quartz operated Analogue time switch day program 167391 TSSD1CO 1 channel, grid freq. synchronized Analogue time switch with day program 167389 TSSD1NO 1 channel, grid freq. synchronized

• SR S D 1NO • SR S W 1NO • SR C D 1CO • SR S D 1CO W

SR …. Sun Relay

S/C … Stand alone/Clock controlled

D/W … DIN rail mounted/wall mounted

1CO/1NO … 1 change over/1normally open

W … wide lux area (2…5000 lux)

• Switching at Zero-crossing  longer lifetime due to reduced wear and tear (protection for relay contacts and lights)

• Simplified programming, due to pre-programmed settings (time & date)

167375 / SRSD1NO 167376 / SRSW1NO

• External build-in light-sensor included in • integrated light sensor scope of delivery • Cable feed-in possible • Indication of channel and switching status backwards and from below

• Switching brightness stepless adjustable • Big connection block • Lux level btw. 2 – 100 lx • Brightness value adjustable stepless and • Fixed switching-on and -off delay without opening

• To avoid failure switching due to • Brightness values from 2 – 2000 lx

lightning, headlights, etc. • Adjustable switching-on and -off delay

• to avoid fault switching due to lightning, headlights

• Big exposure to light (~180°)

• Screws can‘t be lost

• Test button (without opening enclosure)

167377 / SRCD1CO

• Clamp-type terminals • Test function

• One channel • PIN –Coding

• Adjustable switching-on and -off delay • Display illumination • to avoid fault switching due to lightning, can be turned off headlights (pre-setting one minute) • Switching pre-selection • Switching brightness and switching delay • Operating hours counter with for ON and OFF adjustable separately remember function • Fixed ON and OFF times • Display of channel and (e.g. night disconnection) switching status on display • Interface for PC programming (TSAMENKIT) • Holiday program with year function • External light sensor included for fixed and Easter related holidays

• Zero-cross switching • Various Summer/Winter time rules selectable or free definable

167378 / SRSD1COW

• External build-up light-sensor included • Adjustable brightness levels for simple in scope of delivery commissioning of Lux-value (2 - 2000)

• Notice of channel and • Test function switching status • Monitoring of installation independent from adjusted brightness level • Switching brightness stepless adjustable

• Fixed switching-on and -off delay

• To avoid failure switching due to lightning, headlights, etc. • Clamp-type terminals

• TS Q D 1NO • TS S D 1NO • TS Q D 1CO • TS S D 1CO • TS Q W 1CO

TS …Time Switch

Q/S (mechanical) … Quartz (more exact)

Synchronous (depends on net frequency)

D/W … daily program/weekly program

1NO/1CO … 1 normally open/1 change over

• Clamp-type terminal for simplified wiring

• Robust design - Clock can be set counter clockwise;  time saving, when daylight saving time is over

• Clock shows 3, 6, 9 a. m. and 15, 18, 21 p.m.  set-up errors can be avoided

• Permanent ON & OFF unmistakeable marked  easier operations

167388 / TSQD1NO 167389 / TSSD1NO

• Screw terminals Features like TSQD1NO, but

• Daily program • Without power reserve

• Manual switching three position: permanent • Grid frequency synchronized

ON/AUTO/permanent OFF • Switching status indicator

• With power reserve – three days (removable NiMH-Cell)

• 96 switching segments

• Quartz operated

• Minimum switching time: 15 minutes

167390 / TSQD1CO • Daily program • Switching pre-selection • With power reserve • Manual switching three position: (removable NiMH-Cell) permanent ON/AUTO/permanent OFF • 96 switching segments

• Quartz operated

• Minimum switching time: 15 minutes

• Clock-hand for time and 12h/24h indication

• Clamp-type terminals 167391 / TSSD1CO • Switching status indicator Features like TSQD1CO, but: • Simple summer-/winter time correction • Without power reserve • Time correction in clockwise and • Grid frequency synchronized counter clockwise possible

167392 / TSQW1CO

• Weekly program • Switching pre-selection

• With power reserve (~ 200 hours) • Manual switching three position: (NiMH-Cell) permanent ON/AUTO/permanent OFF

• 84 switching segments • Clamp-type terminals

• Quartz operated • Switching status indicator

• Minimum switching time: 2 hours

• Clock hand for time and 12h/24h indication

• Simple summer-/winter time correction

• Time correction in clockwise and counter clockwise possible

• TS D W 1CO • TS A DCF • TS D W 2CO • TS A GPSKIT • TS D W 1CO A • TS A MEMKIT • TS D W 1CO DG • TS A MEM • TS D W 1CO MIN

TS …Time Switch TS …Time Switch

D … Digital A … Accessory

W … Weekly program DCF … DCF antenna

1CO/2CO … 1 change over/2 change over GPS KIT … GPS antenna with A … Astronomical power supply unit

DG … DCF/GPS antenna supported MEMKIT … memory key, USB adaptor and

MIN … slim type (only 1module width) programming software

• Simplified set-up  pre-settings only need confirmation (fewer manually settings needed)

• Switching at zero-crossing

• DCF and GPS synchronization possible (with TSDW1CODG)

• MEMKIT  programming can be copied from one clock to another  pre-programming on PC

167379 / TSDW1CO

• Clamp-type terminals • Automatic summer/winter time switching

• Button to release plug connection • Possible to deactivate

• Text orientated configuration on display • Switching rules for Europe, USA and other countries implemented • Date and Time pre-settings • Individual switching rules and according • Full operability without power supply fixed dates selectable • 56 memory places • Integrated operating hours counter • Interface for memory key TSAMEN (PC • Reset possibility programming) • Service function for monitoring • 10 year power reserve (Li-battery) of periodic maintenance

• Switching pre-selection • Holiday program

• Display illumination (possible to turn off) • PIN coding 167380 / TSDW2CO • 2 Channel

167381 / TSDW1COA

• 56 memory places

• Astronomic switching function (automatic calculation of exact sunset & sunrise times during a whole year)

• Offset to correct sunset & sunrise times

• Geographical position (coordinates) or country/city list programmable

• Fixed ON/OFF-Switching programmable (e.g. night intermission)

• Simulation of switching times

• Astro-mode invertible or to deactivate

• Contact type: change over

Other features correlate with TSDW1CO

167382 / TSDW1CODG Features correlate with TSDW1CO

Additional features are:

• Time synchronization due to connection of an external antenna possible (DCF or GPS antenna)

• For GPS antenna power supply unit necessary ( TSAGPSKIT)

• External input

• Push-button connectable (external switching pre-selection, course-timer)

• Switch connectable (continuous circuit ON resp. OFF)

• 84 memory places

• Memory key included in scope of delivery

• Impulse program/cycle program

• Two random programs

• Ending timer

167383 / TSDW1COMIN

• Clamp-type terminals • Automatic summer/winter time switching

• Text orientated configuration on display • Possible to deactivate

• Date and Time pre-settings • Switching rules for Europe, USA and other

• Full operability without power supply countries implemented • Individual switching rules and according fixed • 56 memory places dates selectable • 10 year power reserve • Integrated operating hours counter • ON/OFF switching times • Reset possibility • Switching pre-selection • Service function for monitoring • PIN-Coding of periodic maintenance

• Holiday program

TSADCF TSAMEN • Antenna DCF • Memory key for time switch • For digital time switch, weekly program, 1CO

TSAGPSKIT TSAMENKIT • A set of GPS antenna and • PC set and memory key for power supply unit digital time switches • For type TSDW1CODG power supply unit is necessary • For worldwide time synchronization

• If you have any question about technical issues please contact Eaton Product Management:

Eaton Industries (Austria) GmbH Scheydgasse 42 1215 Vienna

[email protected]

• For sales inquiries please get in contact with Eaton country sales subsidiaries.