PRO DJ LINK Setup Guide Contents How to Read This Manual the Instructions in This Manual Use the Indications Below

PRO DJ LINK Setup Guide Contents How to read this manual The instructions in this manual use the indications below. ! Button names displayed on the main unit of the product, and the screen names on the software are enclosed in [ ]. (Example: [LINK] button, [UTILITY] screen) ! The version of rekordbox for mobile devices is referred to as “rekordbox (iOS/ Android) ”. ! The version of rekordbox for Mac/Windows is referred to as “rekordbox (Mac/ Windows)”. “rekordbox” is used to indicate the versions of rekordbox and rekordbox (iOS/Android) simultaneously, as well as when referring to rekordbox functions directly.

Before start Purpose of this guide...... 3 General description of PRO DJ LINK...... 3 To make connections...... 4 About trademarks and registered trademarks...... 4

Connecting DJ player (Group A) and DJ mixer (Group A) Connecting rekordbox by wireless LAN...... 5 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)...... 8

Connecting DJ player (Group A) and DJ mixer (Group B) Connecting rekordbox by wireless LAN...... 11 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)...... 14

Connecting DJ player (Group A) and other DJ mixers Connecting rekordbox by wireless LAN...... 17 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)...... 19

Connecting DJ player (Group B) and DJ mixer (Group A) Connecting rekordbox via cable/Setting the storage device (USB/SD)...... 21

Connecting DJ player (Group B) and DJ mixer (Group B) Connecting rekordbox via cable/Setting the storage device (USB/SD)...... 24

Connecting DJ player (Group B) and other DJ mixers Connecting rekordbox via cable/Setting the storage device (USB/SD)...... 27

2 En Before start Before start

Purpose of this guide This guide describes the procedures for making the connections required to use the PRO DJ LINK functions.

General description of PRO DJ LINK To enable various PRO DJ LINK functions proposed by Pioneer, use wireless LAN or LAN cable 1 to connect a mobile device (iOS/Android) or a computer (Mac/Windows) on which DJ player, DJ mixer or rekordbox supporting PRO DJ LINK are installed. The main functions that can be achieved by PRO DJ LINK are as follows: ! Music files in various media such as smartphones and tablets 23, computer 3, USB device, or SD memory card 4 etc., are transmitted by wireless methods 2 or with LAN/USB cable, and these files can be shared/played on a maximum of 4 players 5. ! Music of a maximum of 4 DJ players can be played by automatically adjusting the tempo and beat, by installing the BEAT SYNC2 function. ! The channel status (on air status and channel number) can be checked instantaneously. ! The quantize function makes it possible to apply beat effects in tempo with the music. Besides this, functions can be enhanced further by using a combination of DJ player and DJ mixer supporting PRO DJ LINK. For details, see the respective operating instructions.

1 Use a LAN cable of CAT5e or higher. 2 Supports only CDJ-2000NXS/CDJ-900NXS/XDJ-1000. 3 rekordbox must be installed. 4 Only CDJ-2000NXS/CDJ-2000 are supported. 5 Music files in CD/DVD cannot be shared. About SD memory cards In the subsequent explanations, SD memory card and USB device are collectively described as “Storage device (USB/SD)”. SD memory card can only be used in the supporting equipment.

Type of equipment supporting PRO DJ LINK made by Pioneer This information is as of YY 2014 MM 12 DD 15. For latest information, see the Pioneer support DJ site below. http://pioneerdj.com/support/ DJ players supporting PRO DJ LINK CDJ-2000NXS/CDJ-2000/CDJ-900NXS/CDJ-900/XDJ-1000 DJ mixers supporting PRO DJ LINK DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT

To make maximum use of the PRO DJ LINK function PRO DJ LINK function can be utilized to a maximum using music files analyzed by rekordbox. Mobile device (iOS/Android) or computer (Mac/Windows) on which the rekordbox is installed can be directly connected to the DJ player or music files analyzed by rekordbox can be used by transferring to a storage device (USB/SD). rekordbox can be downloaded free of charge from the following website: http://rekordbox.com/ Recommended rekordbox versions rekordbox (iOS/Android) Ver.1.2.0 or greater, rekordbox (Mac/Windows) Ver.3.1.0 or greater ! For detailed connection and operation method of a mobile device (iOS/Android) or a computer on which rekordbox is installed, see the user’s manual of rekordbox (iOS/ Android) or the user’s manual of rekordbox (Mac/Windows). Mobile device (iOS/Android) that can be connected to each type of equipment with USB cable For mobile devices (iOS/Android) that can be connected by USB cable, see the operating instructions of each type of equipment.

En 3 To make connections The connection procedure for using the PRO DJ LINK function differs according to the combination of devices you are using. This manual describes the connection procedures for different combinations of PRO DJ LINK-compatible Pioneer DJ players and DJ mixers. First check the combination of devices you are using on the table below, then connect following the description of the relevant page. ! Ex.: If you are using a CDJ-2000NXS and a DJM-2000NXS, you should follow procedure 1 . Proceed to page 1 . DJ player (Group A) CDJ-2000NXS/CDJ-900NXS/XDJ-1000 DJ player (Group B) CDJ-2000/CDJ-900 DJ mixer (Group A) DJM-2000NXS/DJM-2000 DJ mixer (Group B) DJM-900NXS/DJM-900SRT

DJ mixer (Group A) DJ mixer (Group B) Other DJ mixers

DJ player (Group A) 1 2 3

DJ player (Group B) 4 5 6

Connecting by wireless LAN ! Use the wireless router (available in the market) and access point (available in the market) which can obtain a sufficient communication speed such as IEEE802.11n, IEEE802.11g etc. Depending on the signal conditions in the usage environment or the wireless router and access point, PRO DJ LINK connections may not operate properly. ! For connection method of wireless LAN, see the operating instructions of the computer or wireless LAN equipment used.

About trademarks and registered trademarks ! Pioneer and rekordbox are registered trademarks of the Pioneer Corporation. ! Windows is a registered trademark of Microsoft Corporation in the United States and other countries. ! Mac is a trademark of Apple Inc., registered in the U.S. and other countries. ! Android™ is a trademark of Google Inc. ! iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries. ! The names of companies and products mentioned herein are the trademarks of their respective owners.

4 En 1 Connecting DJ player (Group A) and DJ mixer (Group A) Connecting DJ player (Group A) and DJ mixer (Group A)

1-1 Connecting rekordbox by wireless LAN

Equipment used ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) ! Wireless router with internal switching hub or access point ! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed ! DJM-2000NXS or DJM-2000 ! Audio cable ! LAN cables (one for each DJ player + one more)

Connections diagram (when connecting two DJ players)

OFF POWER ON

MIC MASTER CD CD CH CD CD USB 1/2 USB 3/4 MIC USB 5/6 USB 7/8 /DIGITAL PHONO /DIGITAL LINE 1 2 3 4 SELECT A B M /DIGITAL LINE /DIGITAL PHONO

TRIM TRIM TRIM TRIM - 0 MULTI TAP REV DELAY ROLL TRANS GATE OVER OVER DELAY ROLL OVER OVER

EFFECT SELECT OVER

MIC +9 10 +9 10 10 +9 10 +9 10 ECHO REVERB SLIP FILTER PHASER SEND/ LEVEL ROLL RETURN HI 7 HI 7 7 HI 7 HI 7 - 0 4 4 EFFECT FREQUENCY 4 4 4

2 2 LOW MID HI 2 2 2 HI 1 1 1 1 1 EQ -12 +12 -26/ +6 -26/ +6 -26/ +6 -26/ +6 0 0 0 0 0

LOW MID - 1 MID - 1 - 1 MID - 1 MID - 1 - 2 -12 +12 - 2 - 2 MINMAX MINMAX MINMAX - 2 - 2 TALK EQ/ - 3 EQ/ - 3 - 3 EQ/ - 3 EQ/ - 3 OFF ON OVER ISO ISO ISO ISO - 5 - 5 - 5 - 5 - 5

-26/ +6 - 7 -26/ +6 - 7 1/8 1/41/2 3/41/1 2/14/1 - 7 -26/ +6 - 7 -26/ +6 - 7

- 10 - 10 - 10 - 10 - 10 INST FX LOW LOW LOW LOW - 15 - 15 - 15 - 15 - 15 NOISEJET TIME LEVEL/DEPTH - 24 - 24 AUTO - 24 - 24 - 24 /TAP dB dB dB dB LRdB TAP -26/ +6 -26/ +6 -26/ +6 -26/ +6 ZIPHPF

MIN MAX BALANCE FILTER FILTER ON/OFF FILTER FILTER

CRUSHLPF CUE

PARAMETER MINMAX MINMAX MINMAX MINMAX L R

LIVE CUE CUE SAMPLER CUE CUE CUE MIN MAX SYNC MASTER LINK MONO STEREO UTILITY CUE WAKE UP

10 10 BOOTH MONITOR HEADPHONES 9 9 MONO SPLITSTEREO 8 8 MIX 7 7 6 6 5 5 4 4 0 MIXING 3 3 Audio cable REMIX MIDI 2 2 ON/OFF START/STOP 1 1 0 0 SNAPSHOT CUE MASTER CURVE SETTING LEVEL ON/OFF CH EQ CUE LAN cable (wired) ISOLATOR EQ - ABTHRU ABTHRU ABTHRU ABTHRU 0 CH FADER CROSS FA DER ASSIGN CROSS FA DER ASSIGN

PHONES CROSS FADER AB Wireless PROFESSIONAL MIXER DJM-2000 nexus CDJ-2000NXS DJM-2000NXS CDJ-2000NXS

Connection procedure

Creating the [PLAYER No.] setting

1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player. ! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen

! Set the second DJ player on in the same way. ! [PLAYER No.] is set to [AUTO] upon shipment from the factory.

En 5 Connecting the cables (LAN cable and audio cables)

1 Connect the wireless router and DJ mixer with LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number. Connect the wireless router/access points to [COMPUTER1] or [COMPUTER2] of DJ mixer. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to [COMPUTER1]

CONTROL CD DIGITAL

CH4 CH 3 R CH2 CH 1R PHONO CD SIGNAL GND LINE CD LINE CD PHONO CD SIGNAL GND L L L L POWER CH 3 CH 1 COMPUTER 1 POWER CONTROL DIGITAL CONTROL CONTROL OUT CH4CCH3 IN CH2 H1 CONTROL OFF POWER CD DIGITAL CD DIGITAL O) CD DIGITAL CD DIGITAL ON R R R LINK R MASTER1 MASTER2 REC OUT BOOTHSENDRETURN CH 3 CH 1 COMPUTER 1 RL L TRS MIDI OUT USB MASTER RLRL(MONO) RL(MONO) ATT. AC IN LINK -6dB -3dB 0dB CH 4CH 2 COMPUTER 2 R 1GND 2HOT CH 4CH 2 COMPUTER 2 3COLD CDJ-2000NXS DJM-2000NXS CDJ-2000NXS

Checking the connections

Checking the DJ player’s link established by LAN connection

Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK

! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again. ! Similarly, check the other DJ players.

Checking that the LAN cable and audio cables are synchronized

Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If it does not match, the connection is considered to be incorrect. Redo the connection procedure once again.

TRIM TRIM

OVER OVER

+9 10 +9 10

HI 7 HI 7

4 4

2 2

1 1 -26/ +6 -26/ +6 0 0

MID - 1 MID - 1 - 2 - 2

EQ/ - 3 EQ/ - 3 ISO ISO - 5 - 5

-26/ +6 - 7 -26/ +6 - 7

- 10 - 10 LOW LOW - 15 - 15

- 24 - 24

dB dB CDJ-2000NXS DJM-2000NXS ! Similarly, check the other DJ players.

6 En Checking the device(s) connected by wireless connection

1 Connect the computer or mobile device (iOS/Android) to wireless router or access points with wireless LAN. 2 Press the [rekordbox] button. Connecting DJ player (Group A) and DJ mixer (Group A) TAG TRACK LINK INFO UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU rekordbox

LINK

USB

DISC

QUANTIZE TIME MODE

AUTO CUE

3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player’s screen.

rekordbox (iOS/Android) rekordbox (Mac/Windows)

4 Press the DJ player’s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.

Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows) The connection completed screen appears.

rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections.

En 7 1-2 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)

Equipment used ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) ! USB cable for connecting mobile device (Use the included iPod cable to connect the iPod to the CDJ-2000NXS.) ! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed ! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. ! DJM-2000NXS or DJM-2000 ! Audio cable ! LAN cables (one for each DJ player + one more)

Connections diagram (when connecting two DJ players)

OFF POWER ON

MIC MASTER CD CD CH CD CD USB 1/2 USB 3/4 MIC USB 5/6 USB 7/8 /DIGITAL PHONO /DIGITAL LINE 1 2 3 4 SELECT A B M /DIGITAL LINE /DIGITAL PHONO

TRIM TRIM TRIM TRIM - 0 MULTI TAP REV DELAY ROLL TRANS GATE OVER OVER DELAY ROLL OVER OVER

EFFECT SELECT OVER

MIC +9 10 +9 10 10 +9 10 +9 10 ECHO REVERB SLIP FILTER PHASER SEND/ LEVEL ROLL RETURN HI 7 HI 7 7 HI 7 HI 7 - 0 4 4 EFFECT FREQUENCY 4 4 4

2 2 LOW MID HI 2 2 2 HI 1 1 1 1 1 EQ -12 +12 -26/ +6 -26/ +6 -26/ +6 -26/ +6 0 0 0 0 0

LOW MID - 1 MID - 1 - 1 MID - 1 MID - 1 - 2 -12 +12 - 2 - 2 MINMAX MINMAX MINMAX - 2 - 2 TALK EQ/ - 3 EQ/ - 3 - 3 EQ/ - 3 EQ/ - 3 OFF ON OVER ISO ISO ISO ISO - 5 - 5 - 5 - 5 - 5

-26/ +6 - 7 -26/ +6 - 7 1/8 1/41/2 3/41/1 2/14/1 - 7 -26/ +6 - 7 -26/ +6 - 7

- 10 - 10 - 10 - 10 - 10 INST FX LOW LOW LOW LOW - 15 - 15 - 15 - 15 - 15 NOISEJET TIME LEVEL/DEPTH - 24 - 24 AUTO - 24 - 24 - 24 /TAP dB dB dB dB LRdB TAP -26/ +6 -26/ +6 -26/ +6 -26/ +6 ZIPHPF

MIN MAX BALANCE FILTER FILTER ON/OFF FILTER FILTER

CRUSHLPF CUE

PARAMETER MINMAX MINMAX MINMAX MINMAX L R

LIVE CUE CUE SAMPLER CUE CUE CUE MIN MAX SYNC MASTER LINK MONO STEREO UTILITY CUE WAKE UP

10 10 BOOTH MONITOR HEADPHONES 9 9 MONO SPLITSTEREO 8 8 MIX 7 7 6 6 5 5 4 4 0 MIXING 3 3 MIDI Audio cable REMIX 2 2 ON/OFF START/STOP 1 1 0 0 SNAPSHOT CUE MASTER CURVE SETTING LEVEL ON/OFF CH EQ CUE

ISOLATOR EQ LAN cable (wired) - ABTHRU ABTHRU ABTHRU ABTHRU 0 CH FADER CROSS FA DER ASSIGN CROSS FA DER ASSIGN

PHONES CROSS FADER AB USB connections PROFESSIONAL MIXER DJM-2000 nexus CDJ-2000NXS DJM-2000NXS CDJ-2000NXS

Connection procedure

Creating the [PLAYER No.] setting

! Set the second DJ player on in the same way. ! [PLAYER No.] is set to [AUTO] upon shipment from the factory.

8 En Connecting the cables (LAN cable and audio cables)

Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number.

Connect computer to [COMPUTER1] or [COMPUTER2] of DJ mixer. Connecting DJ player (Group A) and DJ mixer (Group A) Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1]

CONTROL CD DIGITAL

Checking the connections

Checking the DJ player’s link established by LAN connection

Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK

Checking that the LAN cable and audio cables are synchronized

TRIM TRIM

OVER OVER

+9 10 +9 10

HI 7 HI 7

4 4

2 2

1 1 -26/ +6 -26/ +6 0 0

MID - 1 MID - 1 - 2 - 2

EQ/ - 3 EQ/ - 3 ISO ISO - 5 - 5

-26/ +6 - 7 -26/ +6 - 7

- 10 - 10 LOW LOW - 15 - 15

- 24 - 24

dB dB CDJ-2000NXS DJM-2000NXS ! Similarly, check the other DJ players.

En 9 Checking the connected device(s)

1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button. — When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button. — To use a mobile device (iOS/Android) or USB device connected by wire to the USB (A terminal): Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed. 2 Press the [rekordbox] button.

TAG TRACK LINK INFO UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU rekordbox

LINK

USB

DISC

QUANTIZE TIME MODE

AUTO CUE

! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button. 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.

rekordbox (iOS/Android) rekordbox (Mac/Windows) The devices that have been recognized are indicated on the DJ player’s screen.

Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears.

rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections.

10 En 2 Connecting DJ player (Group A) and DJ mixer (Group B) Connecting DJ player (Group A) and DJ mixer (Group B)

2-1 Connecting rekordbox by wireless LAN

Equipment used ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) ! Wireless router with internal switching hub ! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed ! DJM-900NXS or DJM-900SRT ! Audio cable ! LAN cables (one for each DJ player + one more)

Connections diagram (when connecting two DJ players)

POWER

MIC USB MASTER MIDI START ON/OFF /STOP LFO FORM MIC1 CD/ LINE PHONO CD/ LINE LINE CD/ LINE LINE CD/ LINE PHONO LEVEL DIGITAL USB DIGITAL USB DIGITAL USB DIGITAL USB 1/ 2 3 /4 5 /6 7/ 8 UTILITY WAKE UP BEAT EFFECTS

0 TRIM TRIM TRIM TRIM

OVER OVER OVER OVER OVER CH SELECT 1 2 3 4 10 10 10 10 10 MIC 1 MIC A B MST 7 9 7 9 7 9 7 9 7 PARAMETER 0 LEVEL 4 HI 4 HI 4 HI 4 HI 4 AUTO GRID TAP BPM 2 2 2 2 2 % MIC 2 ms 1 1 1 1 1 0 0 0 0 0 0 -26 / 6 -26 / 6 -26 / 6 -26 / 6 - - - - - HI 1 MID 1 MID 1 MID 1 MID 1 - - 2 - 2 - 2 - 2 - 2 X PAD 12 12 EQ - 3 EQ / - 3 EQ / - 3 EQ / - 3 EQ / - 3 ISO ISO ISO ISO LOW - 5 - 5 - 5 - 5 - 5

12 12 - 7 -26 / 6 - 7 -26 / 6 - 7 -26 / 6 - 7 -26 / 6 - 7 LOW LOW LOW LOW TALK - - - - - OFF ON OVER 10 10 10 10 10 -15 -15 -15 -15 -15 BEAT

-24 -24 -24 -24 -24

dB dB dB dB AUTO QUAN- -26 / 6 -26 / 6 -26 / 6 -26 / 6 L dB R / TAP TAP TIZE

BALANCE DUB GATE/ COLOR COLOR COLOR COLOR SPACE ECHO COMP

SOUND COLOR FX CUE

NOISE CRUSH FILTER LOW HI LOW HI LOW HI LOW HI L R

FLANGER PHASER LINK FILTER ROBOT CUE CUE CUE CUE CUE TRANS MELODIC REVERB SLIP ROLL CUE SPIRAL ROLL MONO STEREO ECHO REV ROLL FADER START DELAY MIDI LFO SND/ RTN 1 2 3 4 4 MIC 3 CF.A 10 10 10 2 CF.B HEADPHONES 9 9 9 BOOTH MONITOR 1 MASTER 8 8 8 MONO SPLIT STEREO 7 7 7 6 6 6 5 5 5 TIME 4 4 4 MIXING 0 3 3 3 2 2 2 Audio cable 1 1 1 EQ CURVE ISOLATOR EQ 000

CUE MASTER LEVEL LEVEL /DEPTH CH FADER ATHRU B ATHRU B ATHRU B ATHRU B

0 MIN MAX LAN cable (wired) CROSS FADER CROSS FA DER ASSIGN ON/OFF

PHONES AB Wireless

CDJ-2000NXS DJM-900NXS CDJ-2000NXS

Connection procedure

Creating the [PLAYER No.] setting

1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player. ! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen (ex.: when set to [PLAYER 2])

! Set the second DJ player on in the same way. ! [PLAYER No.] is set to [AUTO] upon shipment from the factory. ! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.

En 11 Connecting the cables (LAN cable and audio cables)

1 Connect the wireless router and DJ mixer with LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to the DJ mixer

CH 3 CH 2 LINE CD/LINE LINE CD/LINE L L CH 4CH 3 CH 2 CH 1 PHONO CD/LINE LINE CD/LINE LINE CD/LINE PHONO CD/LINE L L L L RETURN POWER MIC2 MIDI OUT POWER CONTROL OFF POWER R L(MONO) GNDSIGN CONTROL ON SIGNAL GNDSIGNAL GND

R R R R MASTER1 R MASTER2 REC OUT BOOTH R DIGITAL SEND R L L L TRS CH2 CH1 R L R L(MONO) R L R L MASTER2 REC OUT BOOTLINKH MASTER OUT LL L TRS IN

R R R AC IN L R L R CH4 CH3 1 GND 2 HOT 3 COLD CDJ-2000NXS DJM-900NXS CDJ-2000NXS

Checking the connections

Checking the DJ player’s link established by LAN connection

Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK

Checking that the LAN cable and audio cables are synchronized

TRIM TRIM

OVER OVER

10 10

7 9 7 9

4 HI 4 HI

2 2

1 1

0 0 -26 / 6 -26 / 6 - - 1 MID 1 MID - 2 - 2

- 3 EQ / - 3 EQ / ISO ISO - 5 - 5

- 7 -26 / 6 - 7 -26 / 6 LOW LOW -10 -10

-15 -15

-24 -24 CDJ-2000NXS DJM-900NXS ! Similarly, check the other DJ players.

12 En Checking the device(s) connected by wireless connection

1 Connect the computer or mobile device (iOS/Android) to wireless router or access points with wireless LAN. 2 Press the [rekordbox] button.

TAG TRACK LINK INFO UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU rekordbox

LINK Connecting DJ player (Group A) and DJ mixer (Group B)

USB

DISC

QUANTIZE TIME MODE

AUTO CUE

3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player’s screen.

rekordbox (iOS/Android) rekordbox (Mac/Windows)

4 Press the DJ player’s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.

Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows) The connection completed screen appears.

rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections.

En 13 2-2 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)

Equipment used ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) ! Switching hub ! USB cable for connecting mobile device (Use the included iPod cable to connect the iPod to the CDJ-2000NXS.) ! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed ! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. ! DJM-900NXS or DJM-900SRT ! Audio cable ! LAN cables (one for each DJ player + two more)

Connections diagram (when connecting two DJ players)

POWER

0 TRIM TRIM TRIM TRIM

12 12 - 7 -26 / 6 - 7 -26 / 6 - 7 -26 / 6 - 7 -26 / 6 - 7 LOW LOW LOW LOW TALK - - - - - OFF ON OVER 10 10 10 10 10 -15 -15 -15 -15 -15 BEAT

-24 -24 -24 -24 -24

dB dB dB dB AUTO QUAN- -26 / 6 -26 / 6 -26 / 6 -26 / 6 L dB R / TAP TAP TIZE

BALANCE DUB GATE/ COLOR COLOR COLOR COLOR SPACE ECHO COMP

SOUND COLOR FX CUE

NOISE CRUSH FILTER LOW HI LOW HI LOW HI LOW HI L R

CUE MASTER LEVEL LEVEL /DEPTH CH FADER ATHRU B ATHRU B ATHRU B ATHRU B LAN cable (wired) 0 MIN MAX CROSS FADER CROSS FA DER ASSIGN ON/OFF

PHONES AB USB connections

CDJ-2000NXS DJM-900NXS CDJ-2000NXS

Connection procedure

Creating the [PLAYER No.] setting

1 Remove the LAN cable from the equipment and unplug the mobile device (iOS/Android) and storage device (USB/SD) from the DJ player. ! When mobile device (iOS/Android) or storage device (USB/SD) are set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen (ex.: when set to [PLAYER 2])

14 En Connecting the cables (LAN cable and audio cables)

1 Connect the switching hub and DJ mixer with LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the switching hub is connected to the DJ mixer Connecting DJ player (Group A) and DJ mixer (Group B)

R R R R MASTER1 R MASTER2 REC OUT BOOTH R DIGITAL SEND R L L L TRS CH2 CH1 R L R L(MONO) R L R L MASTER2 REC OUT BOOTLINKH MASTER OUT LL L TRS IN

R R R AC IN L R L R CH4 CH3 1 GND 2 HOT 3 COLD CDJ-2000NXS DJM-900NXS CDJ-2000NXS

Checking the connections

Checking the DJ player’s link established by LAN connection

Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK

Checking that the LAN cable and audio cables are synchronized

TRIM TRIM

OVER OVER

10 10

7 9 7 9

4 HI 4 HI

2 2

1 1

0 0 -26 / 6 -26 / 6 - - 1 MID 1 MID - 2 - 2

- 3 EQ / - 3 EQ / ISO ISO - 5 - 5

- 7 -26 / 6 - 7 -26 / 6 LOW LOW -10 -10

-15 -15

-24 -24 CDJ-2000NXS DJM-900NXS ! Similarly, check the other DJ players.

En 15 Checking the connected device(s)

TAG TRACK LINK INFO UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU rekordbox

LINK

USB

DISC

QUANTIZE TIME MODE

AUTO CUE

! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button. 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.

rekordbox (iOS/Android) rekordbox (Mac/Windows) The devices that have been recognized are indicated on the DJ player’s screen.

Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears.

rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections.

16 En 3 Connecting DJ player (Group A) and other DJ mixers

3-1 Connecting rekordbox by wireless LAN Connecting DJ player (Group A) and other DJ mixers

Equipment used ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) ! Wireless router with internal switching hub ! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed ! Other DJ mixers (DJ mixers other than DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT) ! Audio cable ! LAN cables (one for each DJ player)

Connections diagram (when connecting two DJ players)

POWER

MIC USB MASTER MIDI LEVEL START ON/OFF UTILITY MIC1 CD/LINE PHONO USB CD/LINE LINE USB CD/LINELINE USB CD/LINE PHONO USB /STOP 1/2 3/4 5/6 7/8

WAKE UP

TRIM TRIM TRIM TRIM BEAT EFFECTS OVER OVER OVER OVER 0

OVER

10 10 10 10 10 9 9 9 9 7 7 7 7 7 MIC 1 HI HI HI HI CH SELECT 4 4 4 4 4 1 2 3 4 0 LEVEL MIC MST 2 2 2 2 2 A B PARAMETER

MIC 2 1 1 1 1 1 AUTO TAP BPM 0 0 -26 / 6 0 -26 / 6 0 -26 / 6 0 -26 / 6 0 % ms - 1 MID - 1 MID - 1 MID - 1 MID - 1

HI - 2 - 2 - 2 - 2 - 2 EQ / EQ / EQ / EQ / - 3 ISO - 3 ISO - 3 ISO - 3 ISO - 3 12 12 EQ - 5 - 5 - 5 - 5 - 5 LOW -26 / 6 -26 / 6 -26 / 6 -26 / 6 - - - - - 7 LOW 7 LOW 7 LOW 7 LOW 7 12 12 -10 -10 -10 -10 -10 BEAT TALK OFF ON OVER DJ-15 mixer-15 other-15 than-15 the-15 -24 -24 -24 -24 -24 AUTO - - - - dB 26 / 6 dB 26 / 6 dB 26 / 6 dB 26 / 6 L dB R / TAP TAP BEAT BEAT BEAT BEAT DJM-2000NXS/COLOR COLOR COLOR COLOR BALANCE NOISE CUTTER

SOUND COLOR FX CUE

CRUSH FILTER DJM-2000/LOW HI LOW HI LOW HI LOW HI L R FILTER FLANGER CUE CUE CUE CUE CUE TRANS PHASER FADER START REVERB ROBOT SPIRAL SLIP ROLL 1 2 3 4 PITCH ECHO ROLL MONO STEREO ECHO REV ROLL DJM-900NXS/ DELAY SND/ RTN

4 MIC 10 10 10 3 CF.A HEAD PHONES 9 9 9 2 CF.B 8 8 8 BOOTH MONITOR MONO SPLIT STEREO 1 MASTER DJM-900SRT7 7 7 6 6 6 5 5 5 Audio cable 4 4 4 TIME MIXING 3 3 3 0 2 2 2 EQ CURVE 1 1 1 ISOLATOR EQ 0 0 0

CUE MASTER LEVEL LEVEL /DEPTH CH FADER ATHRU B ATHRU B ATHRU B ATHRU B LAN cable (wired)

0 MIN MAX CROSS FADER CROSS FADER ASSIGN ON/OFF

PHONES A B Wireless

CDJ-2000NXS CDJ-2000NXS

Connection procedure

Creating the [PLAYER No.] setting

! Set the second DJ player on in the same way. ! [PLAYER No.] is set to [AUTO] upon shipment from the factory.

Connecting the cables (LAN cable and audio cables) For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams.

En 17 Checking the connections

Checking the DJ player’s link established by LAN connection

Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK

Checking the device(s) connected by wireless connection

1 Connect the computer or mobile device (iOS/Android) to wireless router or access points with wireless LAN. 2 Press the [rekordbox] button.

TAG TRACK LINK INFO UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU rekordbox

LINK

USB

DISC

QUANTIZE TIME MODE

AUTO CUE

3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player’s screen.

rekordbox (iOS/Android) rekordbox (Mac/Windows)

4 Press the DJ player’s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.

Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows) The connection completed screen appears.

rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections.

18 En 3-2 Connecting rekordbox via cable/Setting the mobile device (iOS/Android) or storage device (USB/SD)

Equipment used ! CDJ-2000NXS/CDJ-900NXS/XDJ-1000 (1 to 4) ! Switching hub ! USB cable for connecting mobile device (Use the included iPod cable to connect the iPod to the CDJ-2000NXS.) ! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed Connecting DJ player (Group A) and other DJ mixers ! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. ! Other DJ mixers (DJ mixers other than DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT) ! Audio cable ! LAN cables (one for each DJ player + one more)

Connections diagram (when connecting two DJ players)

POWER

MIC USB MASTER MIDI LEVEL START ON/OFF UTILITY MIC1 CD/LINE PHONO USB CD/LINE LINE USB CD/LINE LINE USB CD/LINE PHONO USB /STOP 1/2 3/4 5/6 7/8

WAKE UP

TRIM TRIM TRIM TRIM BEAT EFFECTS OVER OVER OVER OVER 0

OVER

10 10 10 10 10 9 9 9 9 7 7 7 7 7 MIC 1 HI HI HI HI CH SELECT 4 4 4 4 4 1 2 3 4 0 LEVEL MIC MST 2 2 2 2 2 A B PARAMETER

MIC 2 1 1 1 1 1 AUTO TAP BPM 0 0 -26 / 6 0 -26 / 6 0 -26 / 6 0 -26 / 6 0 % ms - 1 MID - 1 MID - 1 MID - 1 MID - 1

-24 -24 -24 -24 -24 AUTO - - - - dB 26 / 6 dB 26 / 6 dB 26 / 6 dB 26 / 6 L dB R / TAP TAP BEAT BEAT BEAT BEAT DJM-2000NXS/COLOR COLOR COLOR COLOR BALANCE NOISE CUTTER

SOUND COLOR FX CUE

CRUSH FILTER DJM-2000/LOW HI LOW HI LOW HI LOW HI L R FILTER FLANGER CUE CUE CUE CUE CUE TRANS PHASER FADER START REVERB ROBOT SPIRAL SLIP ROLL 1 2 3 4 PITCH ECHO ROLL DJM-900NXS/ MONO STEREO ECHO REV ROLL DELAY SND/ RTN

4 MIC 10 10 10 3 CF.A HEAD PHONES 9 9 9 2 CF.B 8 8 8 BOOTH MONITOR MONO SPLIT STEREO 1 MASTER DJM-900SRT7 7 7 6 6 6 5 5 5 Audio cable 4 4 4 TIME MIXING 3 3 3 0 2 2 2 EQ CURVE 1 1 1 ISOLATOR EQ 0 0 0

CUE MASTER LEVEL LEVEL /DEPTH CH FADER ATHRU B ATHRU B ATHRU B ATHRU B LAN cable (wired)

0 MIN MAX CROSS FADER CROSS FADER ASSIGN ON/OFF

PHONES A B USB connections

CDJ-2000NXS CDJ-2000NXS

Connection procedure

Creating the [PLAYER No.] setting

! Set the second DJ player on in the same way. ! [PLAYER No.] is set to [AUTO] upon shipment from the factory.

En 19 Checking the connections

Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK

Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button. — When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button. — To use a mobile device (iOS/Android) or USB device connected by wire to the USB (A terminal): Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed. 2 Press the [rekordbox] button.

TAG TRACK LINK INFO UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU rekordbox

LINK

USB

DISC

QUANTIZE TIME MODE

AUTO CUE

! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button. 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.

rekordbox (iOS/Android) rekordbox (Mac/Windows) The devices that have been recognized are indicated on the DJ player’s screen.

Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears.

rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections.

20 En 4 Connecting DJ player (Group B) and DJ mixer (Group A)

Connecting rekordbox via cable/Setting the storage device (USB/SD)

Equipment used Connecting DJ player (Group B) and DJ mixer (Group A) ! CDJ-2000/CDJ-900 (1 to 4) ! Computer (Mac/Windows) on which rekordbox is installed ! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. ! DJM-2000NXS or DJM-2000 ! Audio cable ! LAN cables (one for each DJ player + one more)

Connections diagram (when connecting two DJ players)

TAG TRACK TAG TRACK UTILITY BACK /REMOVE UTILITY BACK /REMOVE

BROWSE TAG LIST INFOMENU BROWSE TAG LIST INFOMENU OFF OFF OFF POWER ON POWER ON POWER ON LINK STANDBY LINK STANDBY MIC MASTER USB USB STOP UNLOCK LOCK CD CD CH CD CD STOP UNLOCK LOCK /DIGITAL PHONO USB 1/2 /DIGITAL LINE USB 3/4 1 2 3 4 MIC A B M /DIGITAL LINE USB 5/6 /DIGITAL PHONO USB 7/8 USB SELECT USB

DISC EJECT DISC EJECT SD TRIM TRIM TRIM TRIM - 0 SD MULTI TAP REV DELAY ROLL TRANS GATE OVER OVER DELAY ROLL OVER OVER

DISC EFFECT SELECT OVER DISC

+9 +9 +9 +9 10 MIC 10 10 SLIP SEND/ 10 10 SD ECHO REVERB FILTER PHASER SD LEVEL HI HI ROLL RETURN HI HI TIME AUTO 7 7 7 7 7 TIME AUTO MODE CUE - 0 MODE CUE HOT CUE 4 4 EFFECT FREQUENCY 4 4 4 HOT CUE VINYL LOW MID HI VINYL SPEED ADJUST 2 2 2 2 2 SPEED ADJUST HI TOUCH/BRAKE 1 1 1 1 1 TOUCH/BRAKE EQ -12 +12 -26/ +6 -26/ +6 -26/ +6 -26/ +6 0 0 0 0 0

LOW MID - 1 MID - 1 - 1 MID - 1 MID - 1 - 2 -12 +12 - 2 - 2 MINMAX MINMAX MINMAX - 2 - 2 IN / CUE OUTRELOOP/EXIT NEEDLE SEARCH CUE /LOOP DELETE MEMORY IN / CUE OUTRELOOP/EXIT NEEDLE SEARCH CUE/LOOP DELETE MEMORY TALK EQ/ - 3 EQ/ - 3 - 3 EQ/ - 3 EQ/ - 3 OFF ON OVER LOOP CALL RELEASE/START ISO ISO ISO ISO LOOP CALL RELEASE/START - 5 - 5 - 5 - 5 - 5

-26/ +6 - 7 -26/ +6 - 7 1/8 1/41/2 3/41/1 2/14/1 - 7 -26/ +6 - 7 -26/ +6 - 7

IN ADJUST OUT ADJUST - 10 - 10 - 10 - 10 - 10 IN ADJUST OUT ADJUST JOG ADJUST INST FX LOW LOW LOW LOW JOG ADJUST 4-BEAT LOOP - 15 - 15 - 15 - 15 - 15 4-BEAT LOOP NOISEJET TIME LEVEL/DEPTH - 24 - 24 AUTO - 24 - 24 - 24 REC / CALL /TAP REC / CALL LOOP CUTTER dB dB dB dB LRdB LOOP CUTTER LIGHTHEAVY VINYL LIGHTHEAVY VINYL JOG TAP JOG MODE -26/ +6 -26/ +6 -26/ +6 -26/ +6 MODE CDJ ZIPHPF CDJ MIN MAX BALANCE FILTER FILTER ON/OFF FILTER FILTER

CRUSHLPF DIRECTION TEMPO CUE DIRECTION TEMPO 6 10 16 WIDE 6 10 16 WIDE FWD PARAMETER FWD MINMAX MINMAX MINMAX MINMAX L R REV REV LIVE MASTER CUE CUE CUE CUE CUE MASTER TEMPO SAMPLER TEMPO MIN MAX TRACK SEARCH SYNC MASTER TRACK SEARCH LINK MONO STEREO UTILITY CUE WAKE UP

10 10 BOOTH MONITOR HEADPHONES 9 9 MONO SPLITSTEREO 8 8 MIX SEARCH 7 7 SEARCH 6 6 5 5 4 4 0 MIXING 3 3 REMIX MIDI 2 2 ON/OFF START/STOP 1 1 0 0 SNAPSHOT CUE MASTER 0 0 CURVE SETTING LEVEL ON/OFF CUE TEMPO CH EQ CUE TEMPO Audio cable RESET RESET CUE

ISOLATOR EQ - ABTHRU ABTHRU ABTHRU ABTHRU 0 CH FADER REV FWD REV FWD PLAY / PAUSE CROSS FA DER ASSIGN CROSS FA DER ASSIGN PLAY / PAUSE

PHONES CROSS FADER TEMPO AB TEMPO LAN cable (wired)

MULTI PLAYER CDJ-2000 MULTI PLAYER CDJ-2000 PROFESSIONAL MIXER DJM-2000 nexus CDJ-2000 DJM-2000NXS CDJ-2000

Connection procedure

Creating the [PLAYER No.] setting

1 Remove the LAN cable from the equipment and unplug the storage device (USB/SD) from the DJ player. ! When storage device (USB/SD) is set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of DJ player, and set [PLAYER No.] to [AUTO]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen

! Set the second DJ player on in the same way. ! [PLAYER No.] is set to [AUTO] upon shipment from the factory.

En 21 Connecting the cables (LAN cable and audio cables)

Connect the LAN cable and audio cables. Connect in such a way that the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are the same number. Connect computer to [COMPUTER1] or [COMPUTER2] of DJ mixer. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1]

CONTROL CD DIGITAL

CH4 CH 3 R CH2 CH 1R PHONO CD SIGNAL GND LINE CD LINE CD PHONO CD SIGNAL GND L L CHL 3 CH 1 COMPUTERL 1 POWER DIGITAL POWER CONTROL OUT CH4CCH3 IN CH2 H1 CONTROL AUDIO OUT CONTROL DIGITAL OFF POWER CD DIGITAL CD DIGITAL O) CD DIGITAL CD DIGITAL AUDIO OUT CONTROL DIGITAL RL OUT ON RL OUT R R R LINK R MASTER1 MASTER2 REC OUT BOOTHSENDRETURN CH 3 CH 1 COMPUTER 1 RL L TRS MIDI OUT USB LINK USB MASTER RLRL(MONO) RL(MONO) LINK USB ATT. AC IN LINK -6dB -3dB 0dB CH 4CH 2 COMPUTER 2 R 1GND 2HOT CH 4CH 2 COMPUTER 2 3COLD CDJ-2000 DJM-2000NXS CDJ-2000

Checking the connections

Checking the DJ player’s link established by LAN connection (for the CDJ-2000)

Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK

Checking the DJ player’s link established by LAN connection (for the CDJ-900)

Touch and hold the [MENU/UTILITY] button of DJ player for 1 second or more to open the [UTILITY] screen, and confirm that [LINK STATUS] is set to [CONNECTED]. Connecting to LINK Cannot connect to LINK UTILITY UTILITY PLAYER No. 2 PLAYER No. 2 LINK STATUS CONNECTED LINK STATUS NOT CONNECTED AUTO STANDBY ON AUTO STANDBY ON MIDI CHANNEL – MIDI CHANNEL –

! In case [NOT CONNECTED] is displayed, LINK connection is not established. In case of the DJ player where [NOT CONNECTED] is displayed, redo the connection procedure once again. ! Similarly, check the other DJ players.

Checking that the LAN cable and audio cables are synchronized

CD CD /DIGITAL PHONO USB 1/2 /DIGITAL LINE USB 3/4

TRIM TRIM

OVER OVER

+9 10 +9 10

HI 7 HI 7

4 4

2 2

1 1 -26/ +6 -26/ +6 0 0

MID - 1 MID - 1 - 2 - 2

EQ/ - 3 EQ/ - 3 ISO ISO - 5 - 5 CDJ-2000 -26/ +6 - 7 -26/ +6 - 7 - 10 - 10 LOW LOW - 15 - 15

- 24 - 24

dB dB

-26/ +6 -26/ +6

FILTER FILTER

CDJ-900 DJM-2000NXS ! Similarly, check the other DJ players.

22 En Checking the connected device(s)

1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button. — When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button. — To use a USB device connected by wire to the USB (A terminal): Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed). 2 Press the [LINK] button.

TAG TRACK UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU

LINK

USB Connecting DJ player (Group B) and DJ mixer (Group A)

DISC

TIME AUTO MODE CUE

3 Click the [LINK] button to connect.

rekordbox (Mac/Windows) The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.

Ex.: When connecting a computer (Mac/Windows)

rekordbox (Mac/Windows) This completes checking the connections.

En 23 5 Connecting DJ player (Group B) and DJ mixer (Group B)

Connecting rekordbox via cable/Setting the storage device (USB/SD)

Equipment used ! CDJ-2000/CDJ-900 (1 to 4) ! Switching hub ! Computer (Mac/Windows) on which rekordbox is installed ! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. ! DJM-900NXS or DJM-900SRT ! Audio cable ! LAN cables (one for each DJ player + two more)

Connections diagram (when connecting two DJ players)

TAG TRACK POWER TAG TRACK UTILITY BACK /REMOVE UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU BROWSE TAG LIST INFO MENU OFF MIC USB MASTER MIDI OFF POWER ON START POWER ON ON/OFF /STOP LFO FORM CD/ LINE PHONO CD/ LINE LINE CD/ LINE LINE CD/ LINE PHONO LINK STANDBY MIC1 LEVEL LINK STANDBY DIGITAL USB DIGITAL USB DIGITAL USB DIGITAL USB USB 1/ 2 3 /4 5 /6 7/ 8 USB STOP UNLOCK LOCK UTILITY WAKE UP STOP UNLOCK LOCK USB BEAT EFFECTS USB

0 DISC EJECT TRIM TRIM TRIM TRIM DISC EJECT SD SD

OVER OVER OVER OVER OVER CH SELECT 1 2 3 4 10 10 10 10 10 DISC MIC 1 MIC A B MST DISC 7 9 7 9 7 9 7 9 7 PARAMETER 0 LEVEL 4 HI 4 HI 4 HI 4 HI 4 AUTO GRID SD TAP BPM SD TIME AUTO TIME AUTO 2 2 2 2 2 % MODE CUE MIC 2 ms MODE CUE HOT CUE HOT CUE 1 1 1 1 1 VINYL 0 VINYL SPEED ADJUST SPEED ADJUST 0 0 0 0 0 TOUCH/BRAKE -26 / 6 -26 / 6 -26 / 6 -26 / 6 TOUCH/BRAKE - - - - - HI 1 MID 1 MID 1 MID 1 MID 1 - - 2 - 2 - 2 - 2 - 2 X PAD 12 12 EQ - 3 EQ / - 3 EQ / - 3 EQ / - 3 EQ / - 3 ISO ISO ISO ISO IN / CUE OUTRELOOP/EXIT NEEDLE SEARCH CUE/LOOP DELETE MEMORY LOW - 5 - 5 - 5 - 5 - 5 IN / CUE OUTRELOOP/EXIT NEEDLE SEARCH CUE/LOOP DELETE MEMORY CALL CALL LOOP RELEASE /START 12 12 - 7 -26 / 6 - 7 -26 / 6 - 7 -26 / 6 - 7 -26 / 6 - 7 LOOP RELEASE /START LOW LOW LOW LOW TALK - - - - - OFF ON OVER 10 10 10 10 10 - - - - - IN ADJUST OUT ADJUST 15 15 15 15 15 BEAT IN ADJUST OUT ADJUST JOG ADJUST JOG ADJUST 4-BEAT LOOP -24 -24 -24 -24 -24 4-BEAT LOOP

dB dB dB dB L dB R AUTO QUAN- -26 / 6 -26 / 6 -26 / 6 -26 / 6 / TAP TIZE REC / CALL TAP REC / CALL LOOP CUTTER LOOP CUTTER LIGHTHEAVY VINYL LIGHTHEAVY VINYL JOG BALANCE JOG MODE DUB GATE/ COLOR COLOR COLOR COLOR MODE CDJ SPACE ECHO COMP CDJ

SOUND COLOR FX CUE

DIRECTION DIRECTION TEMPO NOISE CRUSH FILTER LOW HI LOW HI LOW HI LOW HI L R TEMPO 6 10 16 WIDE 6 10 16 WIDE FWD FLANGER PHASER FWD LINK FILTER ROBOT REV CUE CUE CUE CUE CUE TRANS MELODIC REV REVERB SLIP ROLL CUE MASTER SPIRAL ROLL MASTER TEMPO MONO STEREO ECHO REV ROLL TEMPO FADER START DELAY MIDI LFO TRACK SEARCH SND/ RTN TRACK SEARCH 1 2 3 4 4 MIC 3 CF.A 10 10 10 2 CF.B HEADPHONES 9 9 9 BOOTH MONITOR 1 MASTER 8 8 8 MONO SPLIT STEREO 7 7 7 SEARCH 6 6 6 SEARCH 5 5 5 TIME 4 4 4 MIXING 0 3 3 3 2 2 2 1 1 1 EQ CURVE ISOLATOR EQ 000

CUE MASTER LEVEL LEVEL /DEPTH 0 CH FADER 0 ATHRU B ATHRU B ATHRU B ATHRU B CUE TEMPO CUE TEMPO Audio cable RESET RESET

0 MIN MAX CROSS FADER CROSS FA DER ASSIGN ON/OFF REV FWD REV FWD PLAY / PAUSE PLAY / PAUSE PHONES

AB TEMPO TEMPO LAN cable (wired)

MULTI PLAYER CDJ-2000 MULTI PLAYER CDJ-2000 CDJ-2000 DJM-900NXS CDJ-2000

Connection procedure

Creating the [PLAYER No.] setting

1 Remove the LAN cable from the equipment and unplug the storage device (USB/SD) from the DJ player. ! When storage device (USB/SD) is set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen (ex.: when set to [PLAYER 2])

24 En Connecting the cables (LAN cable and audio cables)

1 Connect the switching hub and DJ mixer with LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to the DJ mixer

CH 3 CH 2 LINE CD/LINE LINE CD/LINE L L

CH 4CH 3 CH 2 CH 1 Connecting DJ player (Group B) and DJ mixer (Group B) PHONO CD/LINE LINE CD/LINE LINE CD/LINE PHONO CD/LINE L L L L RETURN MIC2 MIDI OUT POWER OFF POWER R L(MONO) GNDSIGN POWER ON SIGNAL GND SIGNAL GND AUDIO OUT CONTROL DIGITAL AUDIO OUT CONTROL DIGITAL RL OUT RL OUT R R R R MASTER1 R MASTER2 REC OUT BOOTH R DIGITAL SEND R L L L TRS CH2 CH1 R L LINK USB R L(MONO) R L R L LINK USB MASTER2 REC OUT BOOTLINKH MASTER OUT LL L TRS IN

R R R AC IN L R L R CH4 CH3 1 GND 2 HOT 3 COLD CDJ-2000 DJM-900NXS CDJ-2000

Checking the connections

Checking the DJ player’s link established by LAN connection (for the CDJ-2000)

Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK

Checking the DJ player’s link established by LAN connection (for the CDJ-900)

Checking that the LAN cable and audio cables are synchronized

TRIM TRIM

OVER OVER

10 10

7 9 7 9

4 HI 4 HI

2 2

1 1 CDJ-2000 0 0 -26 / 6 -26 / 6 - - 1 MID 1 MID - 2 - 2

- 3 EQ / - 3 EQ / ISO ISO - 5 - 5

- 7 -26 / 6 - 7 -26 / 6 LOW LOW -10 -10

-15 -15

-24 -24 CDJ-900 DJM-900NXS ! Similarly, check the other DJ players.

En 25 Checking the connected device(s)

TAG TRACK UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU

LINK

USB

DISC

TIME AUTO MODE CUE

3 Click the [LINK] button to connect.

rekordbox (Mac/Windows) The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.

Ex.: When connecting a computer (Mac/Windows)

rekordbox (Mac/Windows) This completes checking the connections.

26 En 6 Connecting DJ player (Group B) and other DJ mixers

Connecting rekordbox via cable/Setting the storage device (USB/SD)

Equipment used ! CDJ-2000/CDJ-900 (1 to 4) ! Switching hub ! Computer (Mac/Windows) on which rekordbox is installed ! Storage device (USB/SD) on which the music files analyzed by rekordbox are stored. ! Other DJ mixers (DJ mixers other than DJM-2000NXS/DJM-2000/DJM-900NXS/DJM-900SRT) ! Audio cable Connecting DJ player (Group B) and other DJ mixers ! LAN cables (one for each DJ player + one more)

Connections diagram (when connecting two DJ players)

TAG TRACK TAG TRACK UTILITY BACK /REMOVE UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU BROWSE TAG LIST INFO MENU OFF POWER OFF POWER ON POWER ON LINK STANDBY LINK STANDBY MIC USB MIDI USB MASTER USB UNLOCK LOCK LEVEL START UNLOCK LOCK STOP ON/OFF UTILITY STOP MIC1 CD/LINE PHONO USB CD/LINE LINE USB CD/LINELINE USB CD/LINE PHONO USB /STOP USB 1/2 3/4 5/6 7/8 USB

DISC EJECT WAKE UP DISC EJECT SD SD TRIM TRIM TRIM TRIM BEAT EFFECTS OVER OVER OVER OVER 0

OVER DISC DISC 10 10 10 10 10 SD 9 9 9 9 SD 7 7 7 7 7 TIME AUTO MIC 1 HI HI HI HI CH SELECT TIME AUTO MODE CUE 1 2 3 4 MODE CUE HOT CUE 4 4 4 4 4 HOT CUE 0 VINYL LEVEL MIC MST VINYL 2 2 2 2 2 A B SPEED ADJUST PARAMETER SPEED ADJUST

TOUCH/BRAKE MIC 2 1 1 1 1 1 AUTO TOUCH / BRAKE TAP BPM 0 0 -26 / 6 0 -26 / 6 0 -26 / 6 0 -26 / 6 0 % ms - 1 MID - 1 MID - 1 MID - 1 MID - 1

IN / CUE OUTRELOOP/EXIT NEEDLE SEARCH HI - 2 - 2 - 2 - 2 - 2 IN / CUE OUTRELOOP/EXIT NEEDLE SEARCH CUE/LOOP DELETE MEMORY EQ / EQ / EQ / EQ / CUE/LOOP DELETE MEMORY LOOP CALL - 3 ISO - 3 ISO - 3 ISO - 3 ISO - 3 LOOP CALL RELEASE /START 12 12 EQ RELEASE/START - 5 - 5 - 5 - 5 - 5 LOW -26 / 6 -26 / 6 -26 / 6 -26 / 6 - 7 - 7 - 7 - 7 - 7 IN ADJUST OUT ADJUST LOW LOW LOW LOW IN ADJUSTOUT ADJUST JOG ADJUST 12 12 -10 -10 -10 -10 -10 BEAT JOG ADJUST 4-BEAT LOOP TALK 4-BEAT LOOP OFF ON OVER DJ-15 mixer-15 other-15 -than15 the-15

REC / CALL -24 -24 -24 -24 -24 REC / CALL LOOP CUTTER AUTO LOOP CUTTER LIGHTHEAVY VINYL LIGHTHEAVY VINYL JOG dB -26 / 6 dB -26 / 6 dB -26 / 6 dB -26 / 6 L dB R / TAP TAP JOG CDJ MODE BEAT BEAT BEAT BEAT CDJ MODE DJM-2000NXS/COLOR COLOR COLOR COLOR BALANCE NOISE CUTTER

DIRECTION TEMPO SOUND COLOR FX CUE DIRECTION TEMPO 6 10 16 WIDE 6 10 16 WIDE FWD FWD CRUSH FILTER DJM-2000/LOW HI LOW HI LOW HI LOW HI L R REV REV FILTER FLANGER MASTER TRANS PHASER MASTER TEMPO CUE CUE CUE CUE CUE TEMPO FADER START REVERB ROBOT SPIRAL SLIP ROLL TRACK SEARCH 1 2 3 4 PITCH ECHO ROLL TRACK SEARCH DJM-900NXS/ MONO STEREO ECHO REV ROLL DELAY SND/ RTN

4 MIC 10 10 10 3 CF.A HEAD PHONES 9 9 9 2 CF.B SEARCH 8 8 8 BOOTH MONITOR SEARCH MONO SPLIT STEREO 1 MASTER DJM-900SRT7 7 7 6 6 6 5 5 5 4 4 4 TIME MIXING 3 3 3 0 2 2 2 EQ CURVE 1 1 1 ISOLATOR EQ 0 0 0 0 0 CUE MASTER CUE TEMPO LEVEL LEVEL /DEPTH CUE TEMPO Audio cable RESET CH FADER RESET ATHRU B ATHRU B ATHRU B ATHRU B

REV FWD REV FWD PLAY / PAUSE 0 MIN MAX PLAY / PAUSE CROSS FADER CROSS FADER ASSIGN ON/OFF

PHONES TEMPO TEMPO LAN cable (wired) A B MULTI PLAYER CDJ-2000 MULTI PLAYER CDJ-2000 CDJ-2000 CDJ-2000

Connection procedure

Creating the [PLAYER No.] setting

1 Remove the LAN cable from the equipment and unplug the storage device (USB/SD) from the DJ player. ! When storage device (USB/SD) is set, and when LINK connection is established, [PLAYER No.] settings cannot be changed. 2 Turn on the power supply of the DJ player and DJ mixer. 3 Open the [UTILITY] screen of the DJ player, and assign the desired number (1 to 4) in [PLAYER No.]. ! For the display method of [UTILITY] screen, see the operating instructions of each DJ player. [PLAYER No.] setting screen (ex.: when set to [PLAYER 2])

En 27 Checking the connections

Checking the DJ player’s link established by LAN connection (for the CDJ-2000)

Check that the player number indicated on the DJ player’s screen is lit in white. Connecting to LINK Cannot connect to LINK

Checking the DJ player’s link established by LAN connection (for the CDJ-900)

Checking the connected device(s)

TAG TRACK UTILITY BACK /REMOVE

BROWSE TAG LIST INFO MENU

LINK

USB

DISC

TIME AUTO MODE CUE

3 Click the [LINK] button to connect.

rekordbox (Mac/Windows)

28 En The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.

Ex.: When connecting a computer (Mac/Windows) Connecting DJ player (Group B) and other DJ mixers

rekordbox (Mac/Windows) This completes checking the connections.

En 29