District Heating and Cooling Connection Handbook

Total Page:16

File Type:pdf, Size:1020Kb

District Heating and Cooling Connection Handbook INTERNATIONAL ENERGY AGENCY IEA DISTRICT HEATING AND COOLING Programme of Research, Development and Demonstration on District Heating and Cooling District Heating and Cooling Connection Handbook Bard Skagestad1, Peter Mildenstein2 1Kattner/FVB District Energy Inc. Canada 2Sheffield Heat and Power Group, UK 1 Preface Introduction The International Energy Agency (IEA) was established in 1974 in order to strengthen the co- operation between member countries. As an element of the International Energy Programme, the participating countries undertake co-operative actions in energy research, development and demonstration. District Heating offers excellent opportunities for achieving the twin goals of saving energy and reducing environmental pollution. It is an extremely flexible technology which can make use of any fuel including the utilisation of waste energy, renewables and, most significantly, the application of combined heat and power (CHP). It is by means of these integrated solutions that very substantial progress towards environmental targets, such as those emerging from the Kyoto commitment, can be made. For more information about this Implementing Agreement please check our Internet site www.iea- dhc.org/ Annex VI In May 1999 Annex VI started. The countries that participated were: Canada, Denmark, Finland, Germany, Korea, The Netherlands, Norway, Sweden, United Kingdom, United States of America. The following projects were carried out in Annex VI: Title project ISBN Registration number Simple Models for Operational 90 5748 021 2 S1 Optimisation Optimisation of a DH System by 90 5748 022 0 S2 Maximising Building System Temperatures Differences District Heating Network Operation 90 5748 023 9 S3 Pipe Laying in Combination with 90 5748 024 7 S4 Horizontal Drilling Methods Optimisation of Cool Thermal Storage 90 5748 025 5 S5 and Distribution District Heating and Cooling Building 90 5748 026 3 S6 Handbook Optimised District Heating Systems 90 5748 027 1 S7 Using Remote Heat Meter Communication and Control Absorption Refrigeration with Thermal 90 5748 028 X S8 (ice) Storage Promotion and Recognition of 90-5748-029-8 S9 DHC/CHP benefits in Greenhouse Gas Policy and Trading Programs Introduction ii Benefits of Membership Membership of this implementing agreement fosters sharing of knowledge and current best practice from many countries including those where: • DHC is already a mature industry • DHC is well established but refurbishment is a key issue • DHC is not well established. Membership proves invaluable in enhancing the quality of support given under national programmes. The final materials from the research are tangible examples, but other benefits include the cross-fertilisation of ideas which has resulted not only in shared knowledge but also opportunities for further collaboration. Participant countries benefit through the active participation in the programme of their own consultants and research organizations. Each of the projects is supported by a team of Experts, one from each participant country. The sharing of knowledge is a two-way process, and there are known examples of the expert him/herself learning about new techniques and applying them in their own organization. Information General information about the IEA Programme District Heating and Cooling, including the integration of CHP can be obtained from: IEA Secretariat Mr. Hans Nilsson 9 Rue de la Federation F-75139 Paris, Cedex 15 FRANCE Telephone: +33-1-405 767 21 Fax: +33-1-405 767 49 E-mail: [email protected] or The Operating Agent NOVEM Ms. Marijke Wobben P.O. Box 17 NL-6130 AA SITTARD The Netherlands Telephone: +31-46-4202322 Fax: +31-46-4528260 E-mail: [email protected] Acknowledgements The work carried out for this project has been monitored by an Experts Group and the authors would like to thank the members for their valuable guidance and advice. The members of the Experts Group were: N. Andersen (Denmark) A. Jones (UK) K. D. Koo (South Korea) G. Nilsson (Sweden) P.G. Ramsek (The Netherlands) F. Schmidt (Germany) J. Stang (Norway) M. Tiitinen (Finland) R. Volla (Norway) Introduction iii 2 Summary This report is intended to assist engineers and consultants in designing and implementing conversions of building HVAC systems to accept chilled and hot water from district energy systems. Building types that are addressed include residential, commercial, institutional and industrial. The practical guidelines provided are based on extensive conversion and operating experience. As well as highlighting the most cost effective approach to conversions, the guidelines ensure that technically sound systems are built. The report looks at the fundamentals and principles of both district heating and cooling including energy sources, distribution and customer interface. Design considerations of these three main components of district energy are described, as well as the benefits that district energy can bring to the building owners, the municipality and the public. Critical points in designing the interface between the building energy system and the district energy system (energy transfer station) are outlined and are intended for use in the design of new building systems as well as for conversions of existing buildings. Detailed schematics of energy transfer stations are shown illustrating all components, including control equipment, heat exchangers and energy meter. Energy transfer station performance is detailed with graphs showing the impact of various parameters within a district energy system. The report also highlights the considerations of design and operation of the secondary system or the system that uses the energy from the district energy system. The report also breaks down, step by step, the procedure to convert a building to accept district energy. These include building survey and schematic design, energy consumption, compatibility, costs, system optimization, construction schedule, testing and commissioning. The suitability of a given system to be converted is also discussed. The importance of a correct determination of the heating and cooling demand of a building is stressed, because a proper sizing of the heat exchanger in the energy transfer station affects the operation of the system in a major way. Several methods to determine this load demand value are described. The optimization of the heat exchanger is also very important because it forms a large part of the capital cost of the energy transfer station. Some case histories of buildings connected to a district cooling system are described. Introduction iv Table of Contents 1 PREFACE ......................................................................................................................................................II 2 SUMMARY ................................................................................................................................................... IV PART I: COOLING SECTION .............................................................................................................. 10 3 INTRODUCTION ........................................................................................................................................... 12 4 FUNDAMENTALS OF DISTRICT COOLING ...................................................................................................... 13 Principles of District Cooling.................................................................................................................................................... 13 4.1.1 Cooling Source ............................................................................................................................................................... 13 4.1.2 Distribution..................................................................................................................................................................... 14 4.1.3 Customer Interface or Energy Transfer Station.............................................................................................................. 15 Design Considerations ............................................................................................................................................................... 16 4.1.4 General Considerations.................................................................................................................................................. 16 4.1.5 Cooling Sources.............................................................................................................................................................. 17 4.1.6 Distribution..................................................................................................................................................................... 20 4.1.7 Energy Transfer Stations ................................................................................................................................................ 21 Benefits of District Cooling Systems......................................................................................................................................... 22 4.1.8 Property / Building Owners............................................................................................................................................ 22 4.1.9 Municipalities ................................................................................................................................................................. 22 4.1.10 Society..........................................................................................................................................................................
Recommended publications
  • Consider Installing a Condensing Economizer, Energy Tips
    ADVANCED MANUFACTURING OFFICE Energy Tips: STEAM Steam Tip Sheet #26A Consider Installing a Condensing Economizer Suggested Actions The key to a successful waste heat recovery project is optimizing the use of the recovered energy. By installing a condensing economizer, companies can im- ■■ Determine your boiler capacity, prove overall heat recovery and steam system efficiency by up to 10%. Many average steam production, boiler applications can benefit from this additional heat recovery, such as district combustion efficiency, stack gas heating systems, wallboard production facilities, greenhouses, food processing temperature, annual hours of plants, pulp and paper mills, textile plants, and hospitals. Condensing economiz- operation, and annual fuel ers require site-specific engineering and design, and a thorough understanding of consumption. the effect they will have on the existing steam system and water chemistry. ■■ Identify in-plant uses for heated Use this tip sheet and its companion, Considerations When Selecting a water, such as boiler makeup Condensing Economizer, to learn about these efficiency improvements. water heating, preheating, or A conventional feedwater economizer reduces steam boiler fuel requirements domestic hot water or process by transferring heat from the flue gas to the boiler feedwater. For natural gas-fired water heating requirements. boilers, the lowest temperature to which flue gas can be cooled is about 250°F ■■ Determine the thermal to prevent condensation and possible stack or stack liner corrosion. requirements that can be met The condensing economizer improves waste heat recovery by cooling the flue through installation of a gas below its dew point, which is about 135°F for products of combustion of condensing economizer.
    [Show full text]
  • District Heating System, Which Is More Efficient Than
    Supported by ECOHEATCOOL Work package 3 Guidelines for assessing the efficiency of district heating and district cooling systems This report is published by Euroheat & Power whose aim is to inform about district heating and cooling as efficient and environmentally benign energy solutions that make use of resources that otherwise would be wasted, delivering reliable and comfortable heating and cooling in return. The present guidelines have been developed with a view to benchmarking individual systems and enabling comparison with alternative heating/cooling options. This report is the report of Ecoheatcool Work Package 3 The project is co-financed by EU Intelligent Energy Europe Programme. The project time schedule is January 2005-December 2006. The sole responsibility for the content of this report lies with the authors. It does not necessarily reflect the opinion of the European Communities. The European Commission is not responsible for any use that may be made of the information contained therein. Up-to-date information about Euroheat & Power can be found on the internet at www.euroheat.org More information on Ecoheatcool project is available at www.ecoheatcool.org © Ecoheatcool and Euroheat & Power 2005-2006 Euroheat & Power Avenue de Tervuren 300, 1150 Brussels Belgium Tel. +32 (0)2 740 21 10 Fax. +32 (0)2 740 21 19 Produced in the European Union ECOHEATCOOL The ECOHEATCOOL project structure Target area of EU28 + EFTA3 for heating and cooling Information resources: Output: IEA EB & ES Database Heating and cooling Housing statistics
    [Show full text]
  • Technical Challenges and Innovative Solutions for Integrating Solar Thermal Into District Heating
    Solar Energy Systems GmbH Technical challenges and innovative solutions for integrating solar thermal into district heating P. Reiter SOLID Solar Energy Systems GmbH 06.12.2019 Solar Energy Systems GmbH Solar Heat and DH Solar Cooling Solare Process Heat 26 YEARS EXPERIENCE IN LARGE-SCALE SOLAR THERMAL 300 SYSTEMS BUILT IN MORE THAN 20 COUNTRIES OFFICES IN THE USA, SINGAPORE, GERMANY Energy used by sector: heat - mobility - electricity Solar Energy Systems GmbH Renewable Energy in Total Final Energy Consumption, by Sector, 2016; Source: REN21 Global Status Report 2019 Current supply of DH worldwide Solar Energy Systems GmbH Werner (2017), https://doi.org/10.1016/j.energy.2017.04.045 Energy mix of the future Solar Energy Systems GmbH Limited renewable electricity More wind needed to cover Seasonal current electricity demand mismatch Limited availability Recycling reduces energy from waste Industry tries Operation based on to reduce Limited electricity needs => waste heat availability does not match heat profile Differences between basic SDH and BigSolar Solar Energy Systems GmbH Basic solar district heating (SDH) for covering DHW demand Current SDH systems for covering summer DHW demand Solar Energy Systems GmbH AEVG/Fernheizwerk, Graz, AT Collector field test under real conditions! 10 collector types from 7different manufacturers: • HT-flat plate collectors (foil/double glass) Commiss Collector Nominal Solar CO2- ioning surface power yield savings • Vacuum-tube collectors area Heat • Concentrating collector 2007 8,215 m² 5.7 MW ca. 3,000 1,400 t / 2014-18 MWh/a year Differences between basic SDH and BigSolar Solar Energy Systems GmbH Solar district heating including seasonal storage (BigSolar) Scenario 2 The BigSolar concept Solar Energy Systems GmbH CITYCITY Boiler Boiler Potentials with high solar coverage ratios Solar Energy Systems GmbH SDH for DHW in summer BigSolar (incl.
    [Show full text]
  • Fifth-Generation District Heating and Cooling Substations: Demand Response with Artificial Neural Network-Based Model Predictive Control
    energies Article Fifth-Generation District Heating and Cooling Substations: Demand Response with Artificial Neural Network-Based Model Predictive Control Simone Buffa 1,*, Anton Soppelsa 1 , Mauro Pipiciello 1, Gregor Henze 2,3,4 and Roberto Fedrizzi 1 1 Eurac Research, Institute for Renewable Energy, Viale Druso 1, 39100 Bolzano, Italy; [email protected] (A.S.); [email protected] (M.P.); [email protected] (R.F.) 2 Department of Civil, Environmental and Architectural Engineering, University of Colorado Boulder, Boulder, CO 80309-0428, USA; [email protected] 3 National Renewable Energy Laboratory, Golden, CO 80401, USA 4 Renewable and Sustainable Energy Institute, Boulder, CO 80309, USA * Correspondence: simone.buff[email protected]; Tel.: +39-0471-055636 Received: 16 July 2020; Accepted: 11 August 2020; Published: 21 August 2020 Abstract: District heating and cooling (DHC) is considered one of the most sustainable technologies to meet the heating and cooling demands of buildings in urban areas. The fifth-generation district heating and cooling (5GDHC) concept, often referred to as ambient loops, is a novel solution emerging in Europe and has become a widely discussed topic in current energy system research. 5GDHC systems operate at a temperature close to the ground and include electrically driven heat pumps and associated thermal energy storage in a building-sited energy transfer station (ETS) to satisfy user comfort. This work presents new strategies for improving the operation of these energy transfer stations by means of a model predictive control (MPC) method based on recurrent artificial neural networks. The results show that, under simple time-of-use utility rates, the advanced controller outperforms a rule-based controller for smart charging of the domestic hot water (DHW) thermal energy storage under specific boundary conditions.
    [Show full text]
  • Performance Prediction of a Solar District Cooling System in Riyadh, Saudi T Arabia – a Case Study ⁎ G
    Energy Conversion and Management 166 (2018) 372–384 Contents lists available at ScienceDirect Energy Conversion and Management journal homepage: www.elsevier.com/locate/enconman Performance prediction of a solar district cooling system in Riyadh, Saudi T Arabia – A case study ⁎ G. Franchini , G. Brumana, A. Perdichizzi Department of Engineering and Applied Sciences, University of Bergamo, 5 Marconi Street, Dalmine 24044, Italy ARTICLE INFO ABSTRACT Keywords: The present paper aims to evaluate the performance of a solar district cooling system in typical Middle East Solar cooling climate conditions. A centralized cooling station is supposed to distribute chilled water for a residential com- District cooling pound through a piping network. Two different solar cooling technologies are compared: two-stage lithium- Parabolic trough bromide absorption chiller (2sABS) driven by Parabolic Trough Collectors (PTCs) vs. single-stage lithium-bro- Absorption chiller mide absorption chiller (1sABS) fed by Evacuated Tube Collectors (ETCs). A computer code has been developed Thermal storage in Trnsys® (the transient simulation software developed by the University of Wisconsin) to simulate on hourly basis the annual operation of the solar cooling system, including building thermal load calculation, thermal losses in pipes and control strategy of the energy storage. A solar fraction of 70% was considered to size the solar field aperture area and the chiller capacity, within a multi-variable optimization process. An auxiliary com- pression chiller is supposed to cover the peak loads and to be used as backup unit. The two different solar cooling plants exhibit strongly different performance. For each plant configuration, the model determined the optimal size of every component leading to the primary cost minimization.
    [Show full text]
  • Submission to the DCCAE's Consultation “Ireland's Draft
    Submission to the DCCAE’s Consultation “Ireland’s Draft National Energy and Climate Plan (NECP) 2021-2030” Submission prepared by the Irish District Energy Association February 2019 www.districtenergy.ie [email protected] Submission to ‘Draft NECP’ Consultation from DCCAE: February 2019 Contents Contents ........................................................................................................................................................ 2 1 Introduction .......................................................................................................................................... 3 2 IrDEA welcomes the support for District Heating in the responses to the Initial NECP Consultation .. 3 3 The Potential for District Heating is much higher than proposed in the NECP .................................... 4 4 District Heating is a key enabler of Renewable Heat ............................................................................ 5 4.1 Excess Heat Should be Considered along with Renewable Heat as it also offsets carbon emitting fuels such as oil and gas ............................................................................................................................ 8 5 The Flexibility of District Heating Should be valued under Energy Security ......................................... 9 6 Increasing Renewable Heat will require stronger signals and/or support ......................................... 12 7 Bioenergy should be prioritised where it adds most value ...............................................................
    [Show full text]
  • A Little About Limits…
    FOREST-Handbook, chapter 03-00 1 District heating – Introduction 03-00: Introduction to small-scale district heating… As a “small” district heating network, one would consider anything with a peak thermal power less than about 5-10 MW, but there is no strict limit. The fundamental idea with district heating is simple enough, as shown by the schematic below: Thus, the system consists basically of three serial circuits, a boiler circuit, a distribution circuit and a customer circuit. In practice, there will be two customer circuits – one for the tap water and one for the comfort heating system water. These will be manifest as two separate coils in the customer heat exchanger but for simplicity only one is included in the schematic. The main components and their roles The boiler-end heat exchanger Looking at the schematic above it is obvious that the district heating system contains two heat exchangers – one at the boiler end and one with the customer. From a purely theoretical point of view, it might seem wise to exclude the boiler-end heat exchanger and to use the boiler circuit water also for the distribution, but this is not recommended for two reasons: 1) The part in the system most exposed to and most vulnerable to leakages is the distribution network, which may well extent for several kilometres across the township. In case of a major leakage – and if the boiler water is also the circulating water – the boiler will be dry and may suffer severe damage. Hence, the heat exchanger protects the boiler. 2) For maximum efficiency in the system as a whole it is important that the return water in the distribution system is as cold as possible – preferably below 50 oC.
    [Show full text]
  • District Cooling Systems
    DEPARTMENT OF TECHNOLOGY AND BUILT ENVIRONMENT TECHNOLOGICAL AND ECONOMIC EVALUATION OF DISTRICT COOLING WITH ABSORPTION COOLING SYSTEMS IN GÄVLE (SWEDEN) Elixabet Sarasketa Zabala June 2009 Master’s Thesis in Energy Systems uuir Master Programme in Energy Systems Examiner: Ulf Larsson Supervisor: Åke Björnwall Preface This investigation, as final Thesis Project of Master in Energy Systems (University of Gävle), was started to carry out in February, in collaboration with the company Gävle Energi AB. Many people have been involved answering my questions, providing me with information and so forth; some of those are mentioned below. First of all, I would like to thank Åke Björnwall, my supervisor at Gävle Energi AB, very much for his attention, help and support. His knowledge, comments, guidance and advices have been essential for the development of my work. Needless to say that I have learnt a lot from him. Secondly, I would like to thank the rest of workers at Gävle Energi AB, who have done everything they can to help me, in addition to make pleasant my stay in the company. I would also like to thank Ulf Larsson at the University of Gävle for his help. Furthermore, I am very grateful for all information I have received from other companies. Finally, I do not forget the invaluable support of my mother, Rosa, during all my studies. No one mentioned, no one forgotten. Gävle, June 2009 Elixabet Sarasketa Zabala Abstract Gävle Energi AB is a company which produces electricity as well as heat that is delivered through a district heating network in the municipality of Gävle.
    [Show full text]
  • District Energy Enters the 21St Century
    TECHNICAL FEATURE This article was published in ASHRAE Journal, July 2015. Copyright 2015 ASHRAE. Posted at www.www.burnsmcd.com .org. This article may not be copied and/or distributed electronically or in paper form without permission of ASHRAE. For more information about ASHRAE Journal, visit www.ashrae.org. District Energy Enters The 21st Century BY STEVE TREDINNICK, P.E., MEMBER ASHRAE; DAVID WADE, P.E., LIFE MEMBER ASHRAE; GARY PHETTEPLACE, PH.D., P.E., MEMBER ASHRAE The concept of district energy is undergoing a resurgence in some parts of the United States and the world. Its roots in the U.S. date back to the 19th century and through the years many technological advancements and synergies have developed that help district energy efficiency. This article explores district energy and how ASHRAE has supported the industry over the years. District Energy’s Roots along with systems serving groups of institutional build- District energy systems supply heating and cooling ings, were initiated and prospered in the early decades to groups of buildings in the form of steam, hot water of the 1900s and by 1949 there were over 300 commercial or chilled water using a network of piping from one or systems in operation throughout the United States. Of more central energy plants. The concept has been used course, systems in the major cities of Europe also gained in the United States for more than 140 years with the favor in Paris, Copenhagen and Brussels. In many cases first recognized commercial district energy operation district steam systems were designed to accept waste originating in Lockport, N.Y.
    [Show full text]
  • Integration of Micro-Cogeneration Units and Electric Storages Into a Micro-Scale Residential Solar District Heating System Operating with a Seasonal Thermal Storage
    energies Article Integration of Micro-Cogeneration Units and Electric Storages into a Micro-Scale Residential Solar District Heating System Operating with a Seasonal Thermal Storage Antonio Rosato * , Antonio Ciervo, Giovanni Ciampi , Michelangelo Scorpio and Sergio Sibilio Department of Architecture and Industrial Design, University of Campania Luigi Vanvitelli, 81031 Aversa, Italy; [email protected] (A.C.); [email protected] (G.C.); [email protected] (M.S.); [email protected] (S.S.) * Correspondence: [email protected]; Tel.: +39-081-501-0845 Received: 31 July 2020; Accepted: 9 October 2020; Published: 19 October 2020 Abstract: A micro-scale district heating network based on the operation of solar thermal collectors coupled to a long-term borehole thermal storage is modeled, simulated and investigated over a period of five years. The plant is devoted to covering the domestic hot water and space heating demands of a district composed of six typical residential buildings located in Naples (southern Italy). Three alternative natural gas-fueled back-up auxiliary systems (condensing boiler and two different technologies of micro-cogeneration) aiming at balancing the solar energy intermittency are investigated. The utilization of electric storages in combination with the cogeneration systems is also considered with the aim of improving the self-consumption of cogenerated electric energy; heat recovery from the distribution circuit is also evaluated to pre-heat the mains water for domestic hot water production. The performances of the proposed plant schemes are contrasted with those of a typical Italian decentralized heating plant (based on the utilization of natural gas-fueled non-condensing boilers).
    [Show full text]
  • Danish Emission Inventory for Particulate Matter (PM)
    National Environmental Research Institute Ministry of the Environment ■ Denmark Danish emission inventory for particulate matter (PM) ResearchNotes from NERI No. 189 [Blank page] National Environmental Research Institute Ministry of the Environment ■ Denmark Danish emission inventory for particulate matter (PM) Research Notes from NERI No. 189 2003 Malene Nielsen Morten Winther Jytte Boll Illerup Mette Hjort Mikkelsen Data sheet Title: Danish emission inventory for particulate matter (PM) Authors: Malene Nielsen, Morten Winther, Jytte Boll Illerup og Mette Hjort Mikkelsen. Department: Department of Policy Analysis Serial title and no.: Research Notes from NERI No. 189 Publisher: National Environmental Research Institute © Ministry of the Environment URL: http://www.dmu.dk Date of publication: November 2003 Referee: Hanne Bach; Christian Lange Fogh. Financial support: Danish Environmental Protection Agency. Please cite as: Nielsen, M., Winther, M., Illerup, J.B. & Mikkelsen, M.H. 2003: Danish emission in ­ ventory for particulate matter (PM). National Environmental Research Institute, Denmark. 126 p. - Research Notes from NERI No. 189. http://research-notes.dmu.dk Reproduction is permitted, provided the source is explicitly acknowledged. Abstract: The first Danish emission inventory that was reported in 2002 was a provisional estimate based on data presently available. This report documents methodology, emission factors and references used for an improved Danish emission inventory for particulate matter. Further results of the improved emission inventory for the year 2000 are shown. The particulate matter emission inventory includes TSP, PM10 and PM25. The report covers emission inventories for transport and stationary combus ­ tion. An appendix covering emissions from agriculture is also included. For the transport sector, both exhaust and non-exhaust emission such as tyre and break wear and road abrasion are included.
    [Show full text]
  • Production of District Heating, District Cooling, Electricity and Biogas Our
    Our dream – a city free from fossil fuels Application – First Global District Energy Climate Awards Production of district heating, district cooling, electricity and biogas Borås Energi och Miljö AB, Sweden Borås Energi och Miljö AB, is a municipally owned company and part of Borås Stadshus AB. Contact: Jonas Holmberg – Head of Marketing, +46 33 35 72 20, [email protected] www.borasenergimiljo.se Part of Borås Stadshus AB Borås is Sweden’s 13th largest municipally. Around 64,000 people live in Borås City, and over 100,000 The accumulator tank. throughout the municipality. Borås Energi och Miljö AB (BEM) is a municipally owned company that handles refuse and the production of district heating, cooling and electricity in the municipality of Borås. The company has a vision of a city free from fossil fuels. BEM runs a number of facilities and services, all of which contribute to the reduction of greenhouse gas emissions in one way or another. The term “emissions” used in thes document usally refers to greenhouse gases. First off, please watch our company movie for a quick tour of our company. Click here to watch the movie. We harness all energy streams Whenever they sort their household waste, travel on Today Borås City is a pioneer when it comes to working biogas buses, relax at home with comfortable district in harmony with the biological cycle, and we look on heating or spend time at an office with pleasant district combustible household refuse as a valuable energy cooling, the inhabitants of Borås play an important role resource – energy that would otherwise be wasted.
    [Show full text]