DOCSLIB.ORG

Book IG 1800 British Telecom Rev A.Book

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Book IG 1800 British Telecom Rev A.Book Notice to Users ©2003 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval. 2WIRE PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION, IN NO EVENT SHALL 2WIRE, INC. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. 2Wire, Inc. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement. Updates and additions to software may require an additional charge. Subscriptions to online service providers may require a fee and credit card information. Financial services may require prior arrangements with participating financial institutions. © British Telecommunications Plc 2002. BTopenworld and the BTopenworld orb are registered trademarks of British Telecommunications plc. British Telecommunications Plc registered office is at 81 Newgate Street, London EC1A 7AJ, registered in England No. 180000. ___________________________________________________________________________________________________________________________ Owner’s Record The serial number is located on the bottom of your Intelligent Gateway. Record the serial number in the space provided here and refer to it when you call Customer Care. Serial Number:__________________________ Safety Information • Use of an alternative power supply may damage the Intelligent Gateway, and will invalidate the approval that accompanies the Intelligent Gateway. • To prevent fire or shock hazard, do not expose your Intelligent Gateway to rain or moisture. • To avoid electrical shock, do not open the Intelligent Gateway. Refer servicing to qualified personnel only. • An electrical storm could damage the Intelligent Gateway. To avoid this possibility, disconnect the Intelligent Gateway from the mains power and telephone line during an electrical storm. • Never install telephone sockets in wet locations unless the socket is specifically designed for wet locations. • Never touch uninsulated telephone wire or terminals unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying cable or telephone lines. • Avoid using your modem during an electrical storm. • Do not use your modem or a telephone to report a gas leak in the vicinity of the leak. • Install your Intelligent Gateway within 1830mm of a mains socket. Use caution when laying out the cable to avoid hazard to people walking near or using the equipment. Contents To display the Table of Contents in the left-hand pane, click the Window menu and select Bookmarks. Networking Technology Overview Ethernet . 1 USB . 1 Home Phoneline Networking (HomePNA) . 2 Wireless . 2 Intelligent Gateway . 2 Plan your network . 3 Step 1: Getting Started First: Remove or disable conflicting applications . 4 Second: Check your computer’s system and browser requirements . 4 System Requirements . 4 Browser Requirements . 5 Third: Install your ADSL Filter . 5 Step 2: Connect Your First Computer to the Intelligent Gateway Choose a computer and connection type . 6 Ethernet Connection . 7 Check your connections . 7 USB Connection . 8 Install the Intelligent Gateway USB driver — Windows PC. 9 Install the Intelligent Gateway USB driver — Macintosh . 10 Check your connections . 11 Step 3: Install the Intelligent Gateway Software BT Openworld Pay-As-You-Go Dial Up Connection Option . 12 Installing the Intelligent Gateway Setup Wizard on Windows PCs . 13 Starting the Setup Wizard manually on Windows PCs . 13 Configuring the Intelligent Gateway on Macintosh computers . 14 Macintosh 8.6 and 9.x. 14 Macintosh OS X . 14 Step 4: Add Computers to the Network Choose a computer and connection type . 15 Ethernet Connection . 16 USB Connection . 17 Home Phoneline Networking (HomePNA) Connection . 18 Install the PC Port Driver . 18 Home Phoneline Networking (HomePNA) Connection . 19 Install the PC Port Driver. 19 Wireless Connection . 20 Using the Intelligent Gateway Network System . 23 Viewing your summary . 23 Editing your system password . 24 Setting a password . 24 Changing a password . 24 Editing your date and time settings. 25 Viewing your system details. 25 Broadband Link . 26 Viewing your Broadband Link summary . 26 Checking your connection details . 26 Viewing connection information . 26 Viewing connection details . 27 DSL connection details . 27 Internet connection details . 28 Checking your connection speed . 29 Monitoring your Internet connection . 30 Using Broadband Link diagnostics. 30 Viewing Broadband Link statistics. 31 Modifying Broadband Link settings . 32 Local Network . 33 Viewing Local Network summary information . 33 Editing advanced.
Load more

Recommended publications
  • Mobile Devices 1 Development of Mobile Devices Berker Sönmez
    Mobile Devices 1 Development of Mobile Devices Berker Sönmez Faculty of Computer and Informatics 040100101 Oğuz Onur Kul Faculty of Computer and Informatics 040100105 Erdem Emekligil Faculty of Computer and Informatics 150110702 English 201 Sueda Albayrak December 22, 2011 Mobile Devices 2 Thesis: The hardware, software and connection technologies of mobile devices have developed greatly in the recent years. I. Hardware A. Inside Components 1. Chips 2. Batteries B. Outside Components 1. Cameras 2. Touch sense technologies II. Software A. New operating systems 1. iOS 2. Android B. Functional applications 1. Medical applications 2. Game applications III. Connection technologies A. New generation wireless technologies 1. 802.11(Wifi) and 802.16(WiMax) 2. Bluetooth, IrDA and HomeRF B. Advanced communication protocols 1. 3G technology 2. 4G (LTE) technology Mobile Devices 3 Technology is one of the fastest growing entities in science. Day after day, many improvements are being made, many ideas and inventions are being added to this entity. In the recent years, mobile technology gained importance since people have started living in different places and it is important to provide communication among them. Mobile devices are small, portable equipments that are used to carry out various tasks without being obliged to stay in a certain place. In the recent years, the most popular mobile devices have been mobile phones since they have become everyday objects which people carry in their pockets to wherever they travel. Using mobile devices, it is possible to view e-mails, play games, read books and complete many other tasks on the go. Therefore, the importance of mobile phones can not be overlooked.
    [Show full text]
  • Generating Signals for Wireless Lans, Part I: IEEE 802.11B
    Products: SMIQ, AMIQ, WinIQSIM™, SMIQK16, AMIQK16 Generating Signals for Wireless LANs, Part I: IEEE 802.11b With Wireless Local Area Networks (WLAN) already entering the mass markets, generating signals to WLAN standards will become increasingly important. Signal sources are needed in R&D (or production) to test RF modules, to evaluate basic receiver functionality or when new designs are being evolved. This Application Note focuses on the most commonly used standard IEEE 802.11b. Topics covered include technical aspects of the physical layers as well as details on configuring available signal sources. Subject to change – Gernot Bauer 8/2002 – 1GP49_1E Generating Signals for WLANs, Part I: 802.11b Contents 1 Introduction to Wireless LAN Systems......................................................................................3 2 The IEEE 802.11 and 11b Standards ..........................................................................................5 2.1 The 802.11 and 11b PHY ....................................................................................................6 2.1.1 Defined Transmission Methods.................................................................................6 2.1.1.1 Low Rate Modulation with Barker Spreading................................................7 2.1.1.2 High Rate CCK Modulation...........................................................................8 2.1.1.3 High Rate PBCC Modulation ........................................................................9 2.1.2 The PLCP..................................................................................................................9
    [Show full text]
  • Ethernet/Category 5 Network Cabling Guide Prepared by SJ Wilkinson (August 2002) Based on Steve Derose’S Guide to CAT5 Network Wiring (See Later Web Reference)
    Ethernet/Category 5 Network Cabling Guide Prepared by SJ Wilkinson (August 2002) Based on Steve DeRose’s Guide to CAT5 Network Wiring (See later Web Reference) Networks A Local Area Network (LAN) can be as simple as two computers, each having a network interface card (NIC) or network adapter and running network software, connected together with a crossover cable. Here the crossover cable would have a plug at either end to connect into the NIC socket at the back of each computer. The next step up would be a network consisting of three or more computers and a hub. Each of the computers is plugged into the hub with a straight-thru cable (the crossover function is performed by the hub). For a small network the straight-thru cables would have plugs at either end – one to connect to the computer and one to the hub. For larger networks wall cabling, wall sockets and patch cables are used. A CAT5 "patch panel" is used at the hub end where all your wires come together and provides a group of sockets for further cables. Straight-thru patch cables connect computers to sockets (jacks). Straight-thru wall cables connect sockets to the patch panel. Straight-thru patch cables connect the patch panel to the hub. Patch panels often make network cabling neater but are not essential as (a) wiring a plug is no harder than wiring a panel; (b) you still need cables to go from the panel to the hub; and (c) it adds extra connections, so lowers reliability. 1 Planning your Network Pick a location for your hub, preferably centred to keep cable runs shorter.
    [Show full text]
  • Foreign Direct Investment in Latin America and the Caribbean Alicia Bárcena Executive Secretary
    2010 Foreign Direct Investment in Latin America and the Caribbean Alicia Bárcena Executive Secretary Antonio Prado Deputy Executive Secretary Mario Cimoli Chief Division of Production, Productivity and Management Ricardo Pérez Chief Documents and Publications Division Foreign Direct Investment in Latin America and the Caribbean, 2010 is the latest edition of a series issued annually by the Unit on Investment and Corporate Strategies of the ECLAC Division of Production, Productivity and Management. It was prepared by Álvaro Calderón, Mario Castillo, René A. Hernández, Jorge Mario Martínez Piva, Wilson Peres, Miguel Pérez Ludeña and Sebastián Vergara, with assistance from Martha Cordero, Lucía Masip Naranjo, Juan Pérez, Álex Rodríguez, Indira Romero and Kelvin Sergeant. Contributions were received as well from Eduardo Alonso and Enrique Dussel Peters, consultants. Comments and suggestions were also provided by staff of the ECLAC subregional headquarters in Mexico, including Hugo Beteta, Director, and Juan Carlos Moreno-Brid, Juan Alberto Fuentes, Claudia Schatan, Willy Zapata, Rodolfo Minzer and Ramón Padilla. ECLAC wishes to express its appreciation for the contribution received from the executives and officials of the firms and other institutions consulted during the preparation of this publication. Chapters IV and V were prepared within the framework of the project “Inclusive political dialogue and exchange of experiences”, carried out jointly by ECLAC and the Alliance for the Information Society (@lis 2) with financing from the European
    [Show full text]
  • IEEE Paper Template in A4
    Volume 6, Issue 2, February 2016 ISSN: 2277 128X International Journal of Advanced Research in Computer Science and Software Engineering Research Paper Available online at: www.ijarcsse.com A Review Paper on Cable Connectors Jhankar Tyagi Guest Faculty, Shaheed Sukhdev College of Business Studies, Delhi University, Delhi, India Abstract— This paper is an attempt to give a basic knowledge of cable connectors to the user. Keywords— Cable glands, RJ 45 Connector, Banana Connector, BNC Connector, XLR Connector I. INTRODUCTION An electrical connector is an electro-mechanical device for joining electrical circuits as an interface using a mechanical assembly. Connectors consist of plugs (male-ended) and jacks (female-ended). In computing, an electrical connector can also be known as a physical interface. II. PROPERTIES OF CONNECTORS Electrical connectors are characterized by their pin out and physical construction, ruggedness and resistance to vibration, resistance to entry of water or other contaminants, resistance to pressure, lifetime .They may be keyed to prevent insertion in the wrong orientation. It is usually desirable for a connector to be easy to identify visually, rapid to assemble, and be inexpensive .No single connector has all the ideal properties. Cable Glands: Cable glands known as cable connectors, connect wires to devices mechanically rather than electrically and are distinct from quick-disconnects .They are mechanical cable entry devices and can be constructed from metallic or non-metallic materials. They are used in conjunction with cable and wiring used in electrical instrumentation and automation systems. They are used as a ceiling and a termination device to insure that the characteristic of the enclosure which the cable enters can be contained adequately.
    [Show full text]
  • 2Wire Gateway User Guide
    2Wire Gateway User Guide For 2701HGV-W Notice to Users ©2008 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machine- readable form without prior written approval. 2WIRE PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION, IN NO EVENT SHALL 2WIRE, INC. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. 2Wire, Inc. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement. Updates and additions to software may require an additional charge. Subscriptions to online service providers may require a fee and credit card information. Financial services may require prior arrangements with participating financial institutions. 2Wire, the 2Wire logo, and HomePortal are registered trademarks, and HyperG, Greenlight, FullPass, and GuestPass are trademarks of 2Wire, Inc. All other trademarks are trademarks of their respective owners. 5100-000659-000 Rev 001 08/2008 Contents Introduction Networking Technology Overview . 1 System Tab Viewing Your System Summary . 2 Network at a Glance Panel . 3 System Area of the Network at a Glance Panel . 3 Broadband Link Area of the Network at a Glance Panel .
    [Show full text]
  • The Battle Is On! Enabling the Digital Media Home Network INDUSTRY
    INDUSTRY NOTE May 16, 2007 Robert C. Adams, CFA Digital Media Technology 415.962.4553, [email protected] Wireless Technology Jason Tsai 415.318.7069, [email protected] Erik Rasmussen 415.318-7074, [email protected] The Battle Is On! Enabling the Digital Media Home Network FOR DISCLOSURE INFORMATION, REFER TO MONTGOMERY & CO.’S FACTS & DISCLOSURES ON PAGES 18 & 19 Digital Media Technology & Wireless Technology May 16, 2007 INVESTMENT SUMMARY The battle for the digital media The battle for superiority in the next great digital media market opportunity—the digital multimedia home network is on. home network—is on. And, like all great digital media markets, this one just makes good intuitive sense. Digital media consumers worldwide have a great appetite for digital content and they have a desire to move that content around the home. We believe that, necessitated by the continuing adoption of the digital video recorder (DVR) and other content storage technologies, accelerated by the rapid ramp of digital and high-definition television technologies, and enabled by the deep pockets of the telcos and cable operators, this market is poised for significant growth over the next several years and represents one of the largest-volume semiconductor opportunities in the digital media component space to date. The digital media networked The digital multimedia home network opportunity has been necessitated by the increasing ability of home—a function of recording... the consumer to record (or download) and display video content. Over the last several years consumers, especially in North America, have grown fond of recording content and storing it to hard drive solutions.
    [Show full text]
  • Manual Will Indicate Which Sections Apply to the Different Programming Modes and Setups
    INSTALLATION INSTRUCTIONS MX88 EIGHT ZONE – EIGHT SOURCE AUDIO & AUDIO/VIDEO CONTROLLER/AMPLIFIER Page: 2 Model MX88 IMPORTANT SAFETY INSTRUCTIONS - READ BEFORE OPERATING EQUIPMENT CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product‟s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions, which you should be particularly aware of. 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions – All operating and use instructions should be followed. 5. Water and Moisture – The appliance should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. 6.
    [Show full text]
  • Whitepaper: Understanding Ethernet Patch Cords in Modern Networks
    Intelligently Designed Rack and Cable Management UNDERSTANDING ETHERNET PATCH CORDS IN MODERN NETWORKS Louis Chompff - Founder & Managing Director © 2020 AnD Cable Products Inc. andcable.com UUNDERSTANDINGNDERSTANDING EETHERNETTHERNET PPATCHATCH CCORDSORDS IN MMODERNODERN NENETWORKSTWORKS Copyright ©AnD Cable Products Inc. 2020. All Table of Contents rights reserved. This whitepaper and its content is 1. Ethernet Patch Cords and RJ-45 Connectors 3 copyright of AnD Cable Products Inc. Any redistribution or reproduction of part or all of the contents in any form is 2. Ethernet Patch Cords and UTP Cabling 4 prohibited other than the following: • you may print or locally download for 3. What’s All the Twisting About? 5 your personal and non-commercial use only • you may copy the content to individual 4. Ethernet Applications 7 third parties for their personal use, but only if you acknowledge AnD Cable 5. 568A and 568B Wiring Standards 7 Products Inc. as the source of the material You may not, except with our express written 5.1 Beware of Copper Clad Aluminum 8 permission, distribute or commercially exploit (CCA) Cables the content. Nor may you transmit it or store it in any other website or other form of electronic retrieval system. 6. Which One to Use? 10 7. Straight-Through and Crossover Cables 10 7.1 Data Communications Equipment (DCE) 12 and Data Terminal Equipment (DTE) 8. Glossary 14 About the Author 15 Celebrating over 30 years’ experience in the Manufacture and Supply of Cable Management and Rack Management Products andcable.com UUNDERSTANDINGNDERSTANDING EETHERNETTHERNET PPATCHATCH CCORDSORDS IINN MMODERNODERN NNETWORKSETWORKS Ethernet patch cables have modular characteristics and some important differences that can limit their interchangeability.
    [Show full text]
  • Adslme1 User Guide.Qxd
    Instant BroadbandTM Series ADSL Ethernet Modem Use this guide to install the following: Model No.: ADSLME1 User Guide COPYRIGHT & TRADEMARKS Copyright© 2001 Linksys, All Rights Reserved. Instant Broadband is a registered trade- mark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every Instant Broadband ADSL Ethernet Modem is free from physical defects in material and workmanship for one year from the date of purchase, when used within the limits set forth in the Specification section of this User Guide. If these products prove defective during this warranty period, call Linksys Customer Support in order to obtain a Return Authorization Number. BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product, mark the Return Authorization Number clearly on the outside of the package and include your original proof of pur- chase. All customers located outside of the United States of America and Canada shall be held responsible for shipping and handling charges. IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PROD- UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM- AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT- WARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PRODUCT. Linksys makes no warranty or representation, expressed, implied, or statuto- ry, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, mer- chantability, or fitness for any particular purpose.
    [Show full text]
  • WIRELESS FIDELITY (Wi-Fi) BROADBAND NETWORK TECHNOLOGY: an OVERVIEW with OTHER BROADBAND WIRELESS NETWORKS
    WIRELESS FIDELITY (Wi-Fi) BROADBAND NETWORK TECHNOLOGY: AN OVERVIEW WITH OTHER BROADBAND WIRELESS NETWORKS by Chris A. Nwabueze, M. Eng., MNSE, MNIEEE, MIEE. Silas A. Akaneme, M. Eng., MNSE, MNIEEE, MIEEE Dept. of Electrical/Electronic Engineering, Anambra State University, Uli. E-mail: [email protected]. ABSTRACT Wireless Fidelity (Wi-Fi) broadband network technology has made tremendous impact in the growth of broadband wireless networks. There exists today several Wi-Fi access points that allow employees, partners and customers to access corporate data from almost anywhere and anytime. Wireless broadband networks are expected to grow in terms of broadband speed and coverage, while Wi-Fi can be integrated with WiMAX networks to provide Internet connectivity to mobile Wi-Fi users. This paper explores the Wi-Fi broadband wireless network technology, its uses, advantages and disadvantages, comparison with other broadband wireless networks and integration with WiMAX network. Key Words: Broadband, Wireless Fidelity (Wi-Fi), World Wide Interoperability for Microwave Access (WiMAX), IEEE 802.11 standards. 1.0 INTRODUCTION 802.11a [12]. Wi-Fi is owned by the Wi-Fi Wi-Fi stands for “Wireless Fidelity” and Alliance which is a consortium of separate was used to describe Wireless LAN and independent companies agreeing to a (WLAN) products that are based on the set common interoperable products based IEEE 802.11 standards. Wi-Fi uses both on the family of IEEE 802.11 standards single carrier direct-sequence spread [11]. spectrum radio technology and multi-carrier Wi-Fi certifies products via a set of OFDM (Orthogonal Frequency Division established test procedures to establish Multiplexing) radio technology.
    [Show full text]
  • Wireless Networks Book
    Wireless Networks Local and Ad Hoc Networks Ivan Marsic Department of Electrical and Computer Engineering and the CAIP Center Rutgers University Contents CHAPTER 1................................................................................................... INTRODUCTION ..............................................................................................................................1 1.1 Summary and Bibliographical Notes................................................................................................... 6 CHAPTER 2 THE RADIO CHANNEL.......................................................................1 2.1 Introduction........................................................................................................................................ 1 2.1.1 Decibels and Signal Strength ............................................................................................................ 4 2.2 Channel Implementation..................................................................................................................... 5 2.2.1 Transmission Rate ........................................................................................................................... 5 2.2.2 Symbols To Signals.......................................................................................................................... 6 2.2.3 Modulation ...................................................................................................................................... 6 2.2.4 Noise and Error
    [Show full text]