sign in sign up
<<
Home , Pontiac Firebird

4. 3. 2. 1. Radio Removal: 1982-92 Camaro 4. 5. 3. 2. 7. 6. 1. Radio Removal: 1993-02 USE THIS BRACKET OE Use carriage bolt to attach right side of kit panel directly the dash's radio mount. NOTE: 2. 1. (1985-92 ONLY)Radio Removal: 4. 3. 2. Remove (4) splined screws from radio trimplate. 1. (1982-84 ONLY)Radio Removal: 1982-92 P Pull panel up and outward toward right. towardPull panel up and outward right. eoe()7m hex screws from radio/brackets, outward. pull radio Remove (4) 7mm Disconnect power, connections. antenna, speaker and all electrical Remove (4) splined torque screws trimplate. from radio Use snap-on bit Pull the radio from the dash, Extract from where you (2) screws removed the Extract at the bottom edge of (2) screws Extract (2) screws from the center of underdash panel Extract (3) screws in the glove box bezel to cavity trim that secure the radio Extract (2) screws securing the radio to the dash on the drivers side and the 10mm bolt securing the side and the 10mm bolt securing to the dash on drivers the radio Extract (2) screws securing Extract (3) screws from the bottom edge of dash below the glove box Remove radio. No. SDMT-15 for 1/4" driver. A 3/32" Allen wrech may be used as a substitute. below the steering column. below the steering underdash panel to remove bezel. trim the radio the underdash panel. column and remove the steering dash below the dash. radio on the passenger side. and remove the glove box. unplug all connectors and remove the radio. Carefully pull on edges of radio/console trimpanel to release panel clips and remove trimpanel Carefully pull on edges of radio/console trimpanel. Disconnect power, antenna, speaker and all electrical Pull panel up and outward toward right. Remove (4) 7mm hex screws brackets, from radio outward. pull radio Remove (4) 7mm hex head sheet metal connections. Remove radio. remove radio. and disconnect wiring, radio out of cavity, radio to console, slide screws, which secure No. SDMT-15 for 1/4" driver. A 3/32" Allen wrech may be used as a substitute. REMAINING TABS AND DISCARD. THE INDICATED BRACKETS. CUT OFF THE USE THE SHADED MOUNTING TABS AND BRACKETS. CUT OFF THE REMAINING T USE THE SHADE ontiac Firebird D MOUNTING TABS AND THE INDICATED USE THIS BRACKET BRACKET USE THIS BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD. USE THE SHADED MOUNTING TABS AND THE INDICATED ABS AND DISCARD. Use snap-on bit BRACKET USE THIS MOUNTING PANEL GM1516

USE THIS BRACKET CHEVROLET INSTALLATION ©2006 SCOSCHE INDUSTRIES, INC. I f you have questions, call: any further components while using this booklet. automobile manufacturing the installation of changes or options, or damage that may occur in the automobiles during Vehicles. Inc. Scosche Industries, can not be held responsible for discrepancies/inconsistencies that may occur due to the to installation of this kit (#GM1516) in 1982-UP Chevrolet Camaro and Pontiac Firebird pertaining codes and information booklet is based on carefully documented data This instruction 1982-92 Firebird 1982-84 Firebird 1982-92 Camaro 1993-02 Camaro 1982-UP CHEVROLET CAMARO AND

APLLICATIONS: 1993-UP CHEVROLET CAMARO ILLUSTRATION A: PONTIAC FIREBIRD VEHICLES IN-DASH INSTALLATION KIT FOR CAR STEREO CONNECTORS 1988-Up Select 1988-Up Select General MDA1B Motors 1988-Up Select General GM02B CAR STEREO TO FACTORY WIRING HARNESS. PROVIDE EASY CONNECTION OF YOUR 1978-87 Select General Motors GM01B FACTORY WIRING CODES IBLT DISCLAIMER LIABILITY and research of automobile dash disassemb TECH HELP 1-800-621-3695, ext. 3

GM MOUN

1516

TING SI 01/06 - GM1516 (3000031)

P

ANEL ly, wire harness/ GM1516