ELEMENTAL ANALYSIS

FLUORESCENCE GRATINGS & OEM OPTICALOPTICAL COMPONENTS

PARTICLE CHARACTERIZATION

RAMAN

Brings MicOS SPECTROSCOPIC ELLIPSOMETRY functionality to Microscope Optical SPR IMAGING your Spectrometer

Using a standard microscope for luminescence characterization often means inefficient fiber-optic coupling to the spectrometer, and difficult access for many sample configurations, such as side-emitting devices, or upright cryostats. Nor do standard offer flexibility for coupling multiple lasers for photoluminescence excitation.

HORIBA Scientific’s MicOS merges and , to provide optimal coupling from sample all the way to the detector. Down-looking or side-looking configurations for side-emitting devices or upright cryostats give you flexible sample access. An optional, fully automated stage for mapping and sample-positioning is available. The MicOS offers a flexible platform for the use of multiple lasers for sample excitation. The system includes a vision camera so you always see what you are measuring. Photoluminescence The MicOS is the most cost-effective and flexible500 500 400 400 microspectrometer solution! 300 300

200 200

100 100

0 0 Y (µm) Y (µm) -100 -100

-200 -200 Spectrometers iHR320 iHR550 -300 -300 -400 -400 1 Spectral range 200 nm to 1600 nm -500 -500 50 µm 50 µm

2 -600 -400 -200 0 200 400 600-600 -400 -200 0 200 400 600 Spectral resolution 0.18 nm 0.1 nm X (µm) X (µm) Aggregate of fluorescent Fluorescence map overlay CCD 1024 × Type IGA 512 × 25 Single-channel beads at 700 nm, following Detector 256 OE3 excitation at 633 nm Range 200–1050 nm 800–1600 nm 190–1600 nm4 Excitation laser5 532 nm 633 nm 785 nm Electroluminescence 60 000

500 Microscope Magnification 10× 50× 100× 55 000 400 Objective 50 000 Spot size 100 µm <20 µm <10 µm 300 45 000 Sample stage xyz (manual or motorized) 40 000 200 35 000 100

30 000 0 Y (µm) 1 Intensity (cnt) Depends on choice of objective, filters, and detectors. 25 000 -100

2 20 000 For 1200 gr/mm grating and open-electrode CCD -200 15 000 3BIUV, BIVS, and BIDD formats available for specific quantum-efficiency requirements. -300 10 000 4Needs two detectors to cover entire range. -400 5 000 5Other options are available upon request. -500 50 µm 550 600 650 700 (nm) -600 -400 -200 0 200 400 600 800 X (µm) *Specifications are subject to change without notice. Emission of red LED Red LED ELEMENTAL ANALYSIS

FLUORESCENCE GRATINGS & Detectors OEM SPECTROMETERS Gratings Synapse CCD (250–1050 nm) OPTICALOPTICAL COMPONENTS Grating 1 IGA array (800–1600 nm) PARTICLE CHARACTERIZATION Spectrometer Grating 2 Syncerity CCD (affordability) iHR320 RAMAN Grating 3 Single-channel detector iHR550 SPECTROSCOPIC ELLIPSOMETRY

SPR IMAGING

Side & down objectives 10× 20× 50× Custom

Lasers 532 nm Optional mapping 633 nm Mapping stage 785 nm Focusing stage Custom Mounting platform Microspectroscopy Benefits Fully integrated system Optimum coupling from the sample all the way to the detector Down-looking and side- Flexibility to measure luminescence from side-emitting devices and samples looking configurations in upright cryostats Can accommodate multiple fiber-coupled lasers for excitation at different Multiple lasers Optional automated stage Allows mapping functions and accurate sample-positioning Vision camera included See exactly what you are measuring Complete control of an entire spectrograph system with full LabSpec Software analysis capabilities Wide spectral range Collect emission spectra from 200 nm up to 1600 nm [email protected] www.microspectroscopy.com

USA: +1 732 494 8660 France: +33 (0)1 69 74 72 00 Germany: +49 (0)89 4623 17-0 UK: +44 (0)20 8204 8142 Italy: +39 2 5760 3050 Japan: +81 (0)3 6206 4717 China: +86 (0)21 6289 6060 Brazil: +55 (0)11 5545 1500 Other: +33 (0)69 74 72 00 09/2013 B © HORIBA Instruments Incorporated rev. circumstances. binding under any is not contractually document This