Price MLS $1.00 Minnesota Lapidary Supply “YOUR LAPIDARY SUPPLY GENERAL STORE” America’s Supplier of Quality Lapidary Products FOR OVER 50 YEARS!!!! 2016 – 2017 CATALOG DIAMOND SOME OF THE MANY MANUFACTURES WE WHEELS STOCK AND REPRESENT: LAPS AMERITOOL DISKS COMPOUND BARRANCA TUMBLERS DRILL BITS CABKING CALWAY LOT-O-TUMBLER COVINGTON SAWS DIAMOND PACIFIC DONEGAN OPTICAL The M.L.S. The ROCK STORE EASTWIND WAREHOUSE ESTWING FOREDOM

GRAVES

GRYPHON HI-TECH DIAMOND

ARBORS KEYSTONE ABRASIVES LAPCRAFT LORTONE LOT-O-TUMBLER

MK DIAMOND

Sun. & Mon. ------Closed MLS Tue. thru Fri. ----- 9:00 am to 5:30 pm (CST) NEO-SINT Sat. ------9:00 am to 4:00 pm (CST) SAW BLADES REENTEL OPEN ALL YEAR LONG!!!! TRU-SQUARE

ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE ANY PRINTING ERRORS ARE SUBJECT TO CORRECTION

MLS MLS Trademark Registered - Minnesota Lapidary Supply Minnesota Lapidary Supply 201 N. Rum River Drive Princeton, MN 55371 Ph/Fax: (763) 631-0405 email: [email protected] TOLL FREE ORDER PHONE: (888) 612-3444 WEB SITE: www.lapidarysupplies.com “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

Dear Customers and Fellow ROCKHOUNDS:

Hopefully the worse of the 2008 recession is over and it looks like we are back on track.

Several new items to mention. One of the great new items is the “Easy Clean” system for cleaning your saw oil. Remember that NASTY job we all dread, cleaning the muck out of the bottom of your slab saws. I know I don’t look forward to it. Enter the Easy Clean oil cleaning/recovery system.

A very simplistic concept that has finally come to fruition. The Easy Clean runs your saw oil through what us Chemical Engineers term a bowl type centrifuge. Through centrifugal action the oil is separated from the rock dust made during the cutting process. It deposits the rock dust in a one gallon steel paint can, leaving a putty like consistency while recycling the clean oil back into the saw tank or reservoir. Loss of oil is minimal!!!! To change the can takes just a couple of minutes. A new can costs just a few dollars. Starting with a clean saw sump, it is possible that you may never need to clean the sludge out of your saw again!!!!!

The Easy Clean has sufficient capacity to handle multiple saws. In fact, in the new large lapidary shop I am setting up, we will rig our 4 largest saws into one Easy Clean.

The other item of note, new this year is a new book that I co-authored with Jim Magnuson titled “GEMSTONE – Tumbling, Cutting, Drilling and Cabochon Making”. We tried to take the 4 most common lapidary techniques, update them with current equipment and present them in a user friendly way. Jim’s sister, Carol Wood, a past master at photographing rocks, provided many EXCELLENT photos of the rocks and the techniques. In fact the price of the book is worth it just for the colored pictures of the rocks. More details can be found on page 51 of this catalog.

As our brethren from the frigid north say, Anyways, enjoy thumbing through this new edition of our catalog and HAPPY ROCKHOUNDING. Sincerely, Val B. Carver Val B. Carver, Owner

SEE PAGE 23 FOR DETAILS

SEE PAGE 51 FOR DETAILS 02 “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com TABLE OF CONTENTS TYPES OF ITEMS PAGES 1. TUMBLERS and TUMBLER PARTS ------04 to 06 2. ABRASIVES / POLISHES / CARRIERS / GRIT KITS ------06 to 09 3. LARGE EQUIPMENT: A. BUFFERS ------09 B. ARBORS ------10 to 11 C. ARBOR PACKAGES ------11 to 14 D. ROCK DRILLING SYSTEMS ------15 E. DIAMOND ROUTER TABLE------15, 24 F. MISC. LARGE EQUIPMENT------16 to 20, 24 G. SAWS ------20 to 24 H. PUMPS ------23 I. SPHERE CUTTERS ------25 J. U.V. LIGHTS ------25 K. FACETING EQUIPMENT ------26 to 27 4. SAW BLADES ------28 to 30 5. LUBRICANTS ------31 6. GRINDING WHEELS ------31 to 33 7. SANDING / POLISH BELTS ------34 to 35 8. POLISHING DRUMS / FELT WHEELS ------35 to 36 9. DISCS ------36 to 39 10. FACEPLATES (Polishing Discs) ------39 to 40 11. DIAMOND DRILL AND CARVING BITS ------40 to 41 12. DIAMOND CARVING BITS AND BURS ------42 13. DIAMOND POWDER, PASTE AND SPRAY ------43 14. MISC. TOOLS, EQUIPMENT AND SUPPLIES ------44 to 46 15. ROCKHOUND TOOLS ------47 16. BOOKS: A. The “AGATE” Books ------48 to 49 B. COLLECTING ------49 C. GEOLOGY------50 D. GOLD ------50 E. JEWELRY MAKING ------50 to 51 F. LAPIDARY ARTS ------51 F. METAL WORKING ------51 to 52 G. ROCKS, MINERALS, GEMS and FOSSIL I.D. ------52 to 53 H. TUMBLING ------53 17. NOTES ------54 18. ORDER FORM ------55

03 TUMBLERS AND TUMBLER PARTS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com LORTONE ROTARY ROCK TUMBLERS (POLISHERS): COMMERCIAL LARGE CAPACITY TUMBLERS These rock polishers are quiet, sturdy, economical and simple to MLS PART EQUIPMENT DESCRIPTION PRICE operate and deliver excellent results. All units feature rubber barrels NUMBER with quick-seal closure and a continuous duty fan cooled motor. 20 Lb. Cap., Lortone Model C20, 1/3 Instruction book included with all Lortone rock tumblers. 100016* Hp., 115 VAC., motor included $680.00 100018* 2 - 20 Lb. Cap., Lortone Model C20-2, $920.00 3A 3-1.5B 1/3 Hp., 115 VAC., motor included 40 Lb. Cap., Lortone Model C40, 100022 1/3 Hp., 115 VAC., motor included $770.00 LORTONE SMALL CAPACITY TUMBLERS LORTONE TUMBLER BARRELS - Additional tumbler barrels. MLS PART MLS PART EQUIPMENT DESCRIPTION PRICE EQUIPMENT DESCRIPTION PRICE NUMBER NUMBER 1 ½ Lb. Capacity, Lortone Model 1.5NR 100002 3 Lb. Cap., Lortone Model 3A $96.00 100102 $30.00 3 Lb. Capacity, Lortone Model 3NR 100004 3 - 1 ½ Lb. Cap. Barrels, Model 3-1.5B $142.00 100104 $33.00 4 Lb. Capacity, Lortone Model 4NR 100006 2 - 3 Lb. Cap., Lortone Model 33B $142.00 100106 $47.00 6 Lb. Capacity, Lortone Model 6NR 100008 4 ½ Lb. Cap. Barrel, Lortone Model 45C $142.00 100108 $64.00 100110 12 Lb. Capacity, Lortone Model 12NR $79.50 100112* 20 Lb. Capacity, Lortone Model 20SR $285.00 45C LORTONE 100114 40 Lb. Capacity, Lortone Model 40SR $350.00 LORTONE TUMBLER MOTORS - Replacement tumbler motors. MLS PART EQUIPMENT DESCRIPTION PRICE NUMBER QT12 100202 Motor for Old Lortone 1.5 Tumbler $22.00 QT6 Motor for Lortone Models 3 - 1.5B, 3A, 100204 33B or 45C $29.90 QT66 Motor for Lortone Models QT6, QT66 or 100206 QT12 $74.50

33B 100208 Motor for Lortone Models C-20 or C-40 $229.50

MEDIUM CAPACITY TUMBLERS REPLACEMENT BELTS FOR LORTONE TUMBLERS MLS PART EQUIPMENT DESCRIPTION PRICE MLS PART NUMBER EQUIPMENT DESCRIPTION PRICE NUMBER 6 Lb. Cap., Lortone Model QT6 100010 $200.00 100302 Lortone Models 1.5B and 3A Tumblers $1.95 100012 2 - 6 Lb. Cap. Barrels, Model QT66 $240.00 100304 Lortone Models 3-1.5B, 33B or 45C $2.35 100014 12 Lb. Cap., Lortone Model QT12 $220.00 Tumblers 100306 All Lortone Model QT Tumblers $6.60 TUMBLER KITS: Everything you need to tumble polish a batch of rocks including tumbler, abrasives, polish, plastic pellets and ROCKS. LORTONE TUMBLER PARTS MLS PART MLS PART EQUIPMENT DESCRIPTION PRICE PARTS DESCRIPTION PRICE NUMBER NUMBER 100030 3A Tumbler Kit, 3 Lb. Capacity $128.00 100402 1½ & 3 Lb.. Drum Boot Gasket $4.95 100032 33B Tumbler Kit, 2 - 3 Lb. Capacity $172.50 100404 4½ Lb. Drum Boot Gasket $6.10 100034 45C Tumbler Kit, 4 ½ Lb. Capacity $174.50 100406 6 or 12 Lb. Drum Boot Gasket $7.80 100408 1½ & 3 Lb. Inner Drum Lid with Stud $4.00 WE STOCK MANY PARTS FOR MOST TUMBLERS CURRENTLY MANUFACTURED, PLEASE CONTACT US IF 100410 4½ Lb. Inner Drum Lid with Stud $7.10 YOU ARE LOOKING FOR PARTS 100412 6 or 12 Lb. Inner Drum Lid with Stud $8.20 100414 1½ & 3 Lb. Drum Outer Lid $4.90 COMMERCIAL LARGE CAPACITY TUMBLERS 100416 4½ Lb. Drum Outer Lid $7.15 100418 6 or 12 Lb. Drum Outer Lid $9.15 100420 Knurled Nut and Lid Washer $2.85 100502 1.5E or 3A Tumbler Bearing Set of 4 $6.80 100504 3-1.5B, 33B or 45C Tumbler Bearing Set $3.80 QT6, QT66 or QT12 Tumbler Bearing C40 100506 $11.80 C20 C20-2 Set of 4 * - Item not normally stocked 04 TUMBLERS AND TUMBLER PARTS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

THUMLER’S TUMBLER PARTS LORTONE TUMBLER PARTS MLS PART PARTS DESCRIPTION PRICE NUMBER MLS PART PARTS DESCRIPTION PRICE NUMBER 106200 Model B Replacement Motor, 115 VAC. $98.05 100710 DRIVE AXEL - 3A Tumbler $4.60 106302 Model B Replacement Belt $6.90 100715 DRIVE AXEL - 3-1.5B and/or 33B $6.80 106100 Model B Replacement Drum, Complete $159.80 Tumbler 100720 DRIVE AXEL - 45C Tumbler $5.30 106402 Model B Replacement Drum Lid, Metal $9.75 100725 DRIVE AXEL - QT6 Tumbler $7.60 106404 Model B Replacement Lid Gasket, Std. $8.10 Model B Replacement Lid Gasket, DRIVE AXEL - QT12 and/or QT66 106405 TRIPLE THICKNESS $15.00 100730 Tumbler $8.75 Model B Replacement Drum Liner 100711 IDLER AXEL - 3A Tumbler $4.60 106406 $64.55 IDLER AXEL - 3-1.5B and/or 33B 106108 3# DRUM, Replacement/Extra for $31.55 100716 Tumbler $6.80 models T, A-R1, T2 and AR2 100721 IDLER AXEL - 45C Tumbler $5.30 9# DRUM, Replacement/Extra for Model 106110 AR6 $91.00 100726 IDLER AXEL - QT6 Tumbler $7.60 12# DRUM, Replacement/Extra for IDLER AXEL - QT12 and/or QT66 106112 Model AR12 $151.20 100731 Tumbler $8.75 106426 3# DRUM LID, Replacement $3.70 MOTOR PULLEY - 3A, 3-1.5B, 33B and/ 100604 or 45C Tumbler $2.50 106428 9# DRUM LID, Replacement $5.95 MOTOR PULLEY - QT6, QT12 and/or 106430 12# DRUM LID, Replacement $5.40 100605 QT66 Tumbler $5.25 DRIVE BELT for ALL Model A and B DRIVE AXEL PULLEY - 3A Tumbler 100606 $2.55 106302 Series Tumblers, Replacement $6.90 DRIVE AXEL PULLEY - 3-1.5B, 33B DRIVE BELT for ALL Model T Tumblers, 100607 and/or 45C Tumblers $5.60 106304 Replacement $3.85 DRIVE AXEL PULLEY - QT6, QT12 and/ 100608 or QT66 Tumbler $7.10 LID RETAINER RING for ALL 3# and 106432 12# Drums $4.40 100616 PULLEY AND DRIVE BELT COVER - $14.00 QT6, QT12 and/or QT66 Tumbler 106438 LID RETAINER RING for 9# Drums $5.00 106210 MOTOR, Model “A” Tumblers, 115 VAC. $80.55 WE STOCK MANY OTHER PARTS 106220 MOTOR, Model “T” Tumbler, 115 VAC. $43.90 FOR LORTONE TUMBLERS OF 106230 MOTOR, Model “T2” Tumbler, 115 VAC. $61.50 ALL MODELS THUMLER’S TUMBLER (Vibratory) MLS PART EQUIPMENT DESCRIPTION PRICE NUMBER 106002 MODEL U-V 10, 10 Lb. Capacity $368.60 ROTARY TUMBLERS 106004 MODEL U-V 18, 18 Lb. Capacity $531.95 VIBRATORY TUMBLERS 106006 MODEL U-V 45, 45 Lb. Capacity $1,136.70 106202 Replacement Motor for U-V 10 $127.25 Model B 106204 Replacement Motor for U-V 18 $222.55 106206 Replacement Motor for U-V 45 $222.55 106102 U-V 10 DRUM, Replacement/Extra $96.45 106104 U-V 18 DRUM, Replacement/Extra $131.60 106106 U-V 45 DRUM, Replacement/Extra $309.75

U-V 18 U-V 10 U-V 45 WE STOCK MANY PARTS FOR MOST THUMLER’S TUMBLER (Rotary) TUMBLERS CURRENTLY MANUFACTURED. PLEASE CONTACT US IF YOU ARE LOOKING MLS PART EQUIPMENT DESCRIPTION PRICE NUMBER FOR PARTS THIS INCLUDES: 106090 MODEL B, 15 Lb. Capacity $316.95 BELT, Inc., COVINGTON, DIAMOND PACIFIC, LORTONE, and TRU-SQUARE 05 TUMBLERS AND TUMBLER PARTS / ABRASIVES “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

VIBRA-SONIC TUMBLERS VIBRATORY TUMBLERS MLS PART EQUIPMENT DESCRIPTION PRICE CALWAY “LOT-O-TUMBLER” (VIBRATORY) NUMBER This great vibratory tumbler processes 4 pounds of rocks, start to finish MINI-SONIC, Model MT-10, 10 Lb. in as little as 5 to 12 days depending on material hardness. This unit 108008* Capacity Hoppers, Variable Speed $498.00 can process anything that will fit through the 2 ¼" opening including MINI-SONIC, Model MT-14, 3 - 4 Lb. slabs, cabs and preforms. Polish metal and findings. Unit will not be 108010* Capacity Hoppers, Variable Speed $599.00 damaged by running dry. Solid rubber barrel is easily removed for cleaning. Motor has ball bearings and cooling fans for long life. This 108014* MINI-SONIC, Model MT-14, 1 - 4 Lb. and 1 - $599.00 tumbler has the power to do the job. It has been asked of me, if you 10 Lb. Capacity Hoppers, Variable Speed could only choose one tumbler, what would it be? THIS IS IT!!! MINI-SONIC, Model MT-14, 1 - 14 Lb. 108016* Capacity Hopper, Variable Speed $599.00 BELT, Inc. VIBRA-SONIC TUMBLERS PARTS SINGLE MLS PART PRICE NUMBER PARTS DESCRIPTION DOUBLE MICRO-SONIC 2 Lb. HOPPER, with Lid, 108102 Replacement / Extra $34.15 MLS PART EQUIPMENT DESCRIPTION PRICE NUMBER MINI-SONIC 4 Lb. HOPPER, with Lid, 108104 Replacement / Extra $59.00 101000 SINGLE BARREL, 4 Lb. Capacity $209.95 MINI-SONIC 10 Lb. HOPPER, with Lid, DOUBLE BARREL, 8 Lb. Capacity 101010 $284.95 108106 Replacement / Extra $118.00 MINI-SONIC 14 Lb. HOPPER, with Lid, LOT-O-TUMBLER PARTS 108108 Replacement / Extra $177.00 MLS PART PARTS DESCRIPTION PRICE NUMBER LID for 2 Lb. HOPPER, 108402 Replacement / Extra $18.50 101200 Replacement Motor, Ball Bearings $99.95 LID FOR 4 Lb. HOPPER, Replacement Drum with Cap 101100 $47.00 108403 Replacement / Extra $18.50 101102 Replacement Cap $2.00 108404 LID FOR 10 Lb. HOPPER, $21.00 101500 Replacement Springs, Set of 6 $11.50 Replacement / Extra 101502 Replacement Set of Fans, Set of 2 $25.00 LID FOR 14 Lb. HOPPER, 108406 Replacement / Extra $29.00

VIBRA-SONIC If you love ANTIQUES, you’ll love ROCKS, they are nat uAreBs nRatuAraSl AINVTIEQUSES!!!!

MT-4SV All MLS abrasives, polishes and carriers are made from NEW VIRGIN product, materials are not recycled or reclaimed!!! MLS purchases only the best quality materials. (I use this stuff myself!!!!)

1 Pound Silicon Carbide Containers 5 Pound Silicon Carbide Containers

TUMBLING GRADE SILICON CARBIDE MLS PART EQUIPMENT DESCRIPTION PRICE VIBRA-SONIC TUMBLERS NUMBER MLS PART 118501 20 mesh, Extra-Extra Coarse, 1 Lb. $4.75 EQUIPMENT DESCRIPTION PRICE NUMBER 118101 46/70 mesh, Extra Coarse, 1 Lb. $4.25 MINI-SONIC, Model MT-4SV, 4 Lb. 60/90 mesh, Coarse, 1 Lb. 108004 Capacity Hopper, Variable Speed $283.00 118201 $4.25 118301 150/220 mesh, Medium, 1 Lb. $4.50 108006* MINI-SONIC, Model MT-10, 2 - 4 Lb. $498.00 Capacity Hoppers, Variable Speed 118401 500F mesh, Fine, 1 Lb. $7.70 * - Item not normally stocked. 06 ABRASIVES / POLISHES / CARRIERS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com TUMBLING GRADE SILICON CARBIDE SUPER CERIUM TIN OXIDE MLS PART OXIDE EQUIPMENT DESCRIPTION PRICE NUMBER 118505 20 mesh, Extra-Extra Coarse, 5 Lbs. $21.40 118105 46/70 mesh, Extra Coarse, 5 Lbs. $19.15 118205 60/90 mesh, Coarse, 5 Lbs. $19.15 LINDE A 118305 150/220 mesh, Medium, 5 Lbs. $20.25 118405 500F mesh, Fine, 5 Lbs. $34.65 SPECIALTY POLISHES MLS PART EQUIPMENT DESCRIPTION PRICE NUMBER LAPPING GRADE SILICON CARBIDE 143004 SUPER CERIUM OXIDE, +75%, 4 Oz. $31.50 MLS PART EQUIPMENT DESCRIPTION PRICE NUMBER 143008 SUPER CERIUM OXIDE, +75% 8 Oz. $63.00 119001 80LG mesh, 1 Lb. $4.75 143016 SUPER CERIUM OXIDE, +75%,1 Lb. $120.00 119101 120LG mesh, 1 Lb. $5.15 142004 TIN OXIDE, 99.9% Pure, 4 Oz. $9.50 119201 180LG mesh, 1 Lb. $5.15 142008 TIN OXIDE, 99.9% Pure, 8 Oz. $17.95 119301 220LG mesh, 1 Lb. $4.90 142016 TIN OXIDE, 99.9% Pure, 1 Lb. $34.10 119401 360LG mesh, 1 Lb. $7.65 142104 LINDE A, 0.3 micron, 4 Oz. $33.35 119501 400LG mesh, 1 Lb. $7.65 142108 LINDE A, 0.3 micron, 8 Oz. $66.70 119601 600LG mesh, 1 Lb. $8.00 142116 LINDE A, 0.3 micron, 1 Lb. $127.00 119701 1000LG mesh, 1 Lb. $12.05 119801 1200LG mesh, 1 Lb. $14.70 MLS stocks many different type of BULK (powdered) polishes for many types of rocks, tumblers and lapping devices. If you have a question 119005 80LG mesh, 5 Lbs. $21.40 call us, we will try to help in your selection of the correct polish. 119105 120LG mesh, 5 Lbs. $23.20 Please note our TXP polish. It provides a SUPERIOR polish for hard rocks (e.g. - agates, petrified wood, jaspers, etc.) in any type 180LG mesh, 5 Lbs. 119205 $22.05 of rotary tumbler. It is a micron alumina product that is 119305 220LG mesh, 5 Lbs. $22.05 essentially non-toxic. 119405 360LG mesh, 5 Lbs. $34.40 POLISHES MLS PART EQUIPMENT DESCRIPTION PRICE 119505 400LG mesh, 5 Lbs. $34.40 NUMBER 119605 600LG mesh, 5 Lbs. $36.00 140150 CERIUM OXIDE, (Optical Grade), 1/2 Lb. $15.75 119705 1000LG mesh, 5 Lbs. $54.25 140101 CERIUM OXIDE, (Optical Grade), 1 Lb. $30.00 119805 1200LG mesh, 5 Lbs. $66.15 140201 CHROME OXIDE, 1 Lb. $14.80 140301 LEVIGATED ALUMINA, (Micron Alumina),1 Lb. $6.10 FOR QUANTITIES OF ABRASIVES, POLISHES AND LUSTERITE, 1 Lb. CARRIERS LARGER THAN 5#, CONTACT US FOR OUR 140401 $9.00 BULK ABRASIVES PRICE LIST 140451 PRE-POLISH SPA3, (Micron Alumina), 1 Lb. $7.35 140501 #61 RAPID POLISH, (Submicron Alumina), 1 Lb. $15.25 ALUMINUM OXIDE ABRASIVES 140601 RED ROUGE, (Soft Metal Polish), 1 Lb. $15.20 MLS PART EQUIPMENT DESCRIPTION PRICE NUMBER 140701 TITANIUM DIOXIDE, (Titanium Oxide), 1 Lb. $7.00 120101 400 mesh, AO (Aluminum Oxide), 1 Lb. $7.20 140801 TRIPOLI, 1 Lb. $3.40 120201 600 mesh, AO, (Aluminum Oxide), 1 Lb. $8.10 140901 TXP, (Micron Alumina), 1 Lb. $8.95 120301 800 mesh, AO, (Aluminum Oxide), Lb. $8.50 140105 CERIUM OXIDE, (Optical Grade), 5 Lb. $135.00 120105 400 mesh, AO, (Aluminum Oxide), 5 Lb. $32.40 140205 CHROME OXIDE, 5 Lb. $66.60 120205 600 mesh, AO, (Aluminum Oxide), 5 Lb. $36.45 140305 LEVIGATED ALUMINA, (Micron Alumina), 5 Lb. $27.45 120305 800 mesh, AO, (Aluminum Oxide), 5 Lb. $38.25 140405 LUSTERITE, 5 Lb. $40.50 140455 PRE-POLISH SPA3, (Micron Alumina), 5 Lb. $33.10 140505 #61 RAPID POLISH, (Submicron Alumina), 5 Lb. $68.60 140605 RED ROUGE, (Soft Metal Polish), 5 Lb. $68.40 HAVE FUN WITH ROCKS, 140705 TITANIUM DIOXIDE, (Titanium Oxide), 5 Lb. $31.50 140805 TRIPOLI, 5 Lb. $15.30 IT’S A GREAT HOBBY!!!!! 140905 TXP (Micron Alumina), 5 Lb. $40.25

07 ABRASIVES / POLISHES / CARRIERS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com If you love ANTIQUES, you’ll love ROCKS, they are natures natural ANTIQUES!!!! CERAMIC STICK POLISHES PELLETS SMALL COARSE WALNUT SHELLS WONDERBAR

CERAMIC PELLETS TRIPOLI or BRASS POLISHING MEDIA RED ROUGE XXX WHITE DIAMOND LARGE FABULUSTRE ZAM BROWN TRIPOLI - Use on metal for a dull finish. CERAMIC FABULUSTRE - Use to polish stone, glass, and metals. PELLETS RED ROUGE - To put a high polish on soft metals like silver, brass, TUMBLING copper and gold. MIX PLASTIC PELLETS ZAM - To polish soft stones like turquoise, coral etc. WONDERBAR - To polish plastic, soft or hard stones. CARRIERS AND FILLERS XXX WHITE DIAMOND - To polish plastics. MLS PART EQUIPMENT DESCRIPTION PRICE NUMBER STICK (BAR) POLISHES BRASS POLISHING MEDIA, 15 Oz. MLS PART 130001 $8.80 EQUIPMENT DESCRIPTION PRICE NUMBER CERAMIC PELLETS, (Small, 5/32" X 5/16"), 131101 1 Lb. $5.60 142100 BROWN TRIPOLI, Polishing Stick, 4 Oz. $4.00 142110 BROWN TRIPOLI, Polishing Bar, 2 Lb. $13.00 131201 CERAMIC PELLETS, (Large, 3/8" X 5/8"), $3.30 1 Lb. 142200 FABULUSTRE, Polishing Stick, 4 Oz. $5.00 131301 CERAMIC PELLETS (Fused Brown Aluminum $12.00 142210 FABULUSTRE, Polishing Stick, 1 Lb. $9.50 Oxide), 1 Lb. 142300 RED ROUGE, Polishing Bar, 5 Oz. $5.35 131401 CERAMIC PELLETS, Tumbling Mix $7.00 (Equal parts of our 3 different ceramic pellets), 1 Lb. 142400 ZAM, Polishing Stick, 4 Oz. $5.00 132001 DEBURRING MEDIA, (Epoxy Pyramids), 1 Lb. $8.35 142410 ZAM, Polishing Stick, 1 Lb. $9.50 136001 PLASTIC PELLETS, Floatable, 1 Lb. $4.35 XXX WHITE DIAMOND, Polishing Bar, 2 142500 Lb. Bar. $13.00 134001 STEEL SHOT, (Mixed shapes), 1 Lb. $24.35 STAINLESS STEEL SHOT, (Balls, Angle 142800 WONDERBAR, Polishing Bar, 5.2 Oz. $3.80 133001 $30.00 cuts & UFO’s. Pins added upon request.), 1 Lb. FABULUSTRE POLISHING CLOTH, 135001 WALNUT SHELLS, (Coarse), 1 Lb. $3.00 142600 Real Jewelers’ Rouge on the polishing $6.90 130005 BRASS POLISHING MEDIA, 60 Oz. $34.20 side, buff cloth other side CERAMIC PELLETS, (Small, 5/32" X 5/16"), HULL & BRASS MEDIA BOOSTER 131105 5 Lb. $25.20 142700 #505, by Thumlers Tumbler for use in $9.00 U-V series tumblers, 4 Oz. bottle CERAMIC PELLETS, (Large, 3/8" X 5/8"), 131205 5 Lb. $14.85 WE HAVE MANY OTHER BAR / STICK POLISHES AVAILABLE TO CERAMIC MEDIA, (Fused Brown Aluminum 131305 $42.00 US, GIVE US A CALL FOR A PRICE QUOTE. Oxide), 5 Lb.

CERAMIC PELLETS, Tumbling Mix, (Equal 131405 $31.50 parts of our 3 different ceramic medias), 5 Lb. 132005 DEBURRING MEDIA, (Epoxy Pyramids), 5 Lb. $37.60 GRIT KITS 136005 PLASTIC PELLETS, Floatable, 5 Lb. $19.60 SINGLE USE GRIT KITS 134005 STEEL SHOT, (Mixed shapes), 5 Lb. $109.75 MLS PART EQUIPMENT DESCRIPTION PRICE STAINLESS STEEL SHOT, (Balls, Angle NUMBER 133005 $134.65 cuts & UFO’s. Pins added upon request.), 5 Lb. 3 Lb. Rotary Tumbler, Single Use, 4- 115110 $6.75 135005 WALNUT SHELLS, (Coarse), 5 Lb. $13.50 Step Kit 4 or 4 ½ Lb. Rotary Tumbler, Single 115120 Use, 4-Step Kit $9.50 If you love ANTIQUES, you’ll 6 Lb. Rotary Tumbler, Single Use, 4- 115130 Step Kit $10.25 love ROCKS, they are natures 4 ½ Lb. Vibratory Tumbler, Single Use, 115140 3-Step Kit $3.75 natural ANTIQUES!!!! 10 Lb. Vibratory Tumbler, Single Use, 115150 3-Step Kit $4.85 08 GRIT KITS / BUFFERS / ARBORS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com MLS TUMBLING GRIT AND POLISH KITS FOR ALL MLS TUMBLING GRIT AND POLISH KITS FOR ROTARY TUMBLERS VIBRATORY TUMBLERS MLS 4 ‘N 1 REGULAR SIZED GRIT KIT FOR ROTARY TUMBLERS MLS REGULAR SIZED GRIT KIT FOR VIBRATORY TUMBLERS with SPECIAL TXP POLISH (Enough to Polish 10 pounds of rocks in a ROTARY TUMBLER) KIT CONTAINS: KIT CONTAINS: 2 Lb. 150/220 mesh MEDIUM (Step 1) Silicon Carbide Abrasive 1 Lb. 500F mesh FINE (Step 2) Silicon Carbide Abrasive 1 Lb. 60/90 mesh COARSE (Step 1) Silicon Carbide Abrasive ½ Lb. #61 RAPID (Step 3) Polish 1 Lb. 150/220 mesh MEDIUM (Step 2) Silicon Carbide Abrasive 1 Lb. 500F mesh FINE (Step 3) Silicon Carbide Abrasive MLS Part # 115500 Price $21.65 ½ Lb. TXP (Step 4) Polish MLS Part # 115200 Price $18.90 MLS LARGE SIZED GRIT KIT FOR VIBRATORY TUMBLERS

MLS 4 ‘N 1 LARGE SIZED GRIT KIT FOR ROTARY TUMBLERS KIT CONTAINS: with SPECIAL TXP POLISH 10 Lb. 150/220 mesh MEDIUM (Step 1) Silicon Carbide Abrasive (Enough to Polish 50 pounds of rocks in a ROTARY TUMBLER) 5 Lb. 500F mesh FINE (Step 2) Silicon Carbide Abrasive 2½ Lb. #61 RAPID (Step 3) Polish KIT CONTAINS: 5 Lb. 60/90 mesh COARSE (Step 1) Silicon Carbide Abrasive MLS Part # 115600 Price $95.70 5 Lb. 150/220 mesh MEDIUM (Step 2) Silicon Carbide Abrasive 5 Lb. 500F mesh FINE (Step 3) Silicon Carbide Abrasive MLS REGULAR SIZED GRIT KIT FOR VIBRATORY FLAT LAPS 2½ Lb. TXP (Step 4) Polish MLS Part # 115400 Price $78.45 KIT CONTAINS: 2 Lb. 180LG mesh MEDIUM (Step 1) Silicon Carbide Abrasive 1 Lb. 600LG mesh FINE (Step 2) Silicon Carbide Abrasive 1/2 Lb. TIN OXIDE (Step 3) Polish MLS Part # 115800 Price $32.65 MLS GRIT AND POLISH KITS FOR VIBRATORY MLS LARGE SIZED GRIT KIT FOR VIBRATORY FLAT LAPS FLAT LAPS KIT CONTAINS: 10 Lb. 180LG mesh MEDIUM (Step 1) Silicon Carbide Abrasive 5 Lb. 600LG mesh FINE (Step 2) Silicon Carbide Abrasive 2 1/2 Lb. TIN OXIDE (Step 3) Polish MLS Part # 115900 Price $139.00 BUFFERS LORTONE COMPACT JEWELER’S METAL BUFFER Portable buffer for the camper, demonstration or in the workshop. This buffer has a variable speed foot control for a 0 - 5,000 rpm operation. 1/20 horsepower, 115 VAC, motor delivers more power than most small buffers this size. Sturdy metal frame and a Formica base for easy clean-up.

Comes complete with everything needed to get started: Bristle brush wheel Ring sander mandrel Muslin buff wheel Cotton buff wheel Red rouge polish Tripoli polish

MLS # 200100 Price: $169.50

COVINGTON 6" JEWELER’S METAL BUFFER All metal construction, powerful 1/3 Hp., 115 Vac, 3,450 RPM motor. Powder coated Covington Green metal finish. Includes integral filter and dust collector. Exhaust fan delivers 157 CFM airflow. Two (2) tapered spindles attached to the direct drive motor shaft will accommodate buffing wheels up to 6" diameter.

Comes complete with everything needed to get started: 1 - 4" Flannel Buff. 1 - 4" Muslin buff. 1 - Red rouge polish bar, 1 Lb. 1 – Instruction set.

MLS # 200500 Price: $750.00 09 ARBORS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com BUILD YOUR OWN “ARBOR” WITH LORTONE EQUIPMENT SPLASH SHIELD NS-8L LONG SHAFT LORTONE ARBOR MODEL NS-8 ARBOR This arbor is heavy duty cast aluminum construction with sealed TOOL REST ball bearings. It has an 8" MLS PART EQUIPMENT DESCRIPTION PRICE diameter wheel capacity, ¾" NUMBER threaded shaft, plated wheel 200200 ARBOR, Lortone, Model NS-8 (Std. Shaft) $285.00 flanges, stepped pulley for speed changes and has rear or under 200210 ARBOR, Lortone, Model NS-8L (Long $295.00 bench motor mount capability. Shaft) Build your own custom cab unit by SPLASH SHIELD, Lortone, Model SS-8, adding splash shields, diamond or 200300 (Aluminum construction, 2 part, with drain and hold $55.00 silicon carbide drums or wheels down bracket.) and polishing heads. Drive “V” belt 200310 TOOL REST, Lortone, Model ST-8 $29.50 NS-8 STANDARD SHAFT included. Standard shaft extends (Designed for use with the SS-8 Tool Rest) ARBOR 2 ½” in length; long shaft extends 8 ¼" in length MOTOR, Leeson or equal, 1/3 Hp., 1725 RPM, 115 VAC, with 3 - prong 6 foot 100208 long cord set, manual reset thermal $229.50 overload, ball bearings, open drip proof design. BA-84 LORTONE BEAVER ARBORS Lortone provides the largest selection of arbors on the market today. LORTONE Beaver arbors are available in two styles those being the CLASSIC and STAINLESS STEEL. The CLASSIC arbors are constructed of powder coated mild steel. The new line of STAINLESS STEEL arbor are constructed of 18-8 stainless steel wetted parts - NO RUST under normal usage.

Steady, durable two, four and six wheel arbors with ¾" threaded shafts are ideal as starter units or complete cabochon machines. Use BA-62 these arbors to custom build your own machine, using your choice of drum or wheel for grinding or sanding. End of shaft is threaded to accept ¼ - 20 screwed disc. Rubber mounted sealed ball bearings STAINLESS and full hinged tops on classic units with removable tops on stainless STEEL ARBORS steel units for easy access for maintenance. Complete with spacers, wheel flanges and shaft nuts. The motor supplied with the motorized version is 1/3 Hp, 115 VAC.

MLS PART MLS PART NUMBER OF DIAMETER OF NUMBER PRICE NUMBER PRICE EQUIPMENT DESCRIPTION WHEELS WHEELS (NO MOTOR) (WITH MOTOR) BA-62 CLASSIC (Mild Steel) 2 6" 200400 $275.00 200450 $479.25 BA-62 STAINLESS STEEL 2 6" 200405 $430.00 200455 $626.50 BA-64 CLASSIC (Mild Steel) 4 6" 200410 $320.00 200460 $522.00 BA-64 STAINLESS STEEL 4 6" 200415 $470.00 200465 $664.50 BA-66 CLASSIC (Mild Steel) 6 6" 200420 $340.00 200470 $541.00 BA-66 STAINLESS STEEL 6 6" 200425 $490.00 200475 $683.50 BA-82 CLASSIC (Mild Steel) 2 8" 200430 $310.00 200480 $512.50 BA-82 STAINLESS STEEL 2 8" 200435 $450.00 200485 $645.50

BA-84 CLASSIC (Mild Steel) 4 10 8" 200440 $340.00 200490 $541.00 BA-84 STAINLESS STEEL 4 8" 200445 $490.00 200495 $683.50

10 CategoArRy BdOeRscSription “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com REENTEL INTERNATIONAL ARBORS

Reentel International now has a 6 wheel 6" arbor on the market. The arbor is perfect to build up your own customized Arbor. Each arbor has a ¾” threaded shaft and removable hoods for easy access. The end of the shaft is threaded to accept a ¼-20 screwed disc. Arbor comes complete with spacers, shaft nuts, wheel flanges and installed

8 pulley with drive belt. Three options are available:

½ ” Model 66-MS: Beige in color, ALL Mild Steel. Model 66-MX: Black powder Mild Steel Hood with Stainless Steel Pan, Center Column and Shaft. Model 66-SS: ALL STAINLESS STEEL construction. 26" 13" TO MOUNT MOTOR CUSTOMER MUST PROVIDE MOUNTING BASE REENTEL INTERNATIONAL ARBORS MLS PART MLS PART NUMBER OF DIAMETER OF NUMBER PRICE NUMBER PRICE EQUIPMENT DESCRIPTION WHEELS WHEELS (NO MOTOR) (WITH MOTOR) 66-MS Mild Steel 6 6" 230100 $323.10 230110 $525.00 66-MX Mixed Material 6 6" 230200 $400.00 230210 $598.00 66-SS ALL Stainless Steel 6 6" 230300 $450.00 230310 $645.50 ARBOR PACKAGES MLS Model 2-SC-6 GRINDER / POLISHER 2 Wheel 6" Silicon carbide Arbor Combo INCLUDES: 1 - ¾" diameter mild steel shaft arbor with 1/3 Hp. Motor, 115 VAC 1 - 6" X 1" 100 Mesh Silicon Carbide (Black) Grinding Wheel 1 - 2 ½" X 6" Heavy Duty Expandable Sanding Drum 3 - Each of 100, 220, 400 and 800 Mesh, 2 ½" X 18 15/16" Silicon Carbide Waterproof Cloth Belts 1 - Heavy duty 6" Cast Aluminum Polishing Head with Felt Pad 1 - 1 Lb. Polish (#61 Rapid Polish) and tube of Feathering Disc Adhesive 1 - Overhead Watering system 1 - Set of Safety Goggles, Belt Safety Guard, Flanges and Shaft Spacers

Price of Items if Purchased Separately is over: $778.62 MLS Part #: 290100 Price: $740.00

MLS Model 4-SC-6 GRINDER / POLISHER 4 Wheel 6" Silicon carbide Arbor Combo INCLUDES: 1 - ¾" diameter mild steel shaft arbor with 1/3 Hp. Motor, 115 VAC 1 - 6" X 1" 100 and 220 Mesh Silicon Carbide (Black) Grinding Wheel 2 - 2 ½" X 6" Heavy Duty Expandable Sanding Drum 3 - Each of 100, 220, 400 and 800 Mesh, 2 ½" X 18 15/16" Silicon Carbide Waterproof Cloth Belts 1 - Heavy duty 6" Cast Aluminum Polishing Head with Felt Pad 1 - ½ Lb. Polish (#61 Rapid Polish) and tube of Feathering Disc Adhesive 1 - Overhead Watering system 1 - Set of Safety Goggles, Belt safety Guard, Flanges and Shaft Spacers

Price of Items if Purchased Separately is over: $927.87 MLS Part #: 290110 Price: $881.50 11 ARBOR PACKAGES “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com MLS Model 2-SC-8 GRINDER / POLISHER 2 Wheel 8" Silicon Carbide Arbor Combo INCLUDES: 1 - ¾" diameter mild steel shaft arbor with 1/3 Hp. Motor, 115 VAC 1 - 8" X 1 1/2" 100 Mesh Silicon Carbide (Black) Grinding Wheel 1 - 3" X 8" Heavy Duty Expandable Sanding Drum 3 - Each of 100, 220, 400 and 800 Mesh, 3" X 25 7/32" Silicon Carbide Waterproof Cloth Belts 1 - Heavy duty 8" Cast Aluminum Polishing Head with Felt Pad 1 - 1 Lb. Polish (#61 Rapid Polish) and tube of Feathering Disc Adhesive 1 - Overhead Watering system 1 - Set of Safety Goggles, Belt Safety Guard, Flanges and Shaft Spacers

Price of Items if Purchased Separately is over: $875.84 MLS Part #: 290120 Price: $832.05

MLS Model 4-SC-8 GRINDER / POLISHER 4 Wheel 8" Silicon Carbide Arbor Combo INCLUDES: 1 - ¾" diameter mild steel shaft arbor with 1/3 Hp. Motor, 115 VAC 1 - 8" X 1 1/2" 100 and 220 Mesh Silicon Carbide (Black) Grinding Wheel 2 - 3" X 8" Heavy Duty Expandable Sanding Drum 3 - Each of 100, 220, 400 and 800 Mesh, 3" X 25 7/32" Silicon Carbide Waterproof Cloth Belts 1 - Heavy duty 8" Cast Aluminum Polishing Head with Felt Pad 1 - 1 Lb. Polish (#61 Rapid Polish) and tube of Feathering Disc Adhesive 1 - Overhead Watering system 1 - Set of Safety Goggles, Belt Safety Guard, Flanges and Shaft Spacers

Price of Items if Purchased Separately is over: $1,047.74 MLS Part #: 290130 Price: $995.40

MLS MINI 6 X 4" DIAMOND GRINDER / POLISHER 6 X 4" Diamond Wheel Arbor Combo 1 - ¾" diameter mild steel shaft arbor with 1/3 Hp. Motor, 115 VAC 1 - 4" X 1 1/4" 80 & 220 Mesh Diamond Pacific Galaxy Diamond Grinding Wheel 1 - 4" X 1 ¼" 280, 600, 1,200 & 3,000 Mesh Diamond Pacific Nova Diamond Sanding / Polish Wheels 2 - 4" Canvas Faced Polishing Discs 1 - 8,000 and 14,000 Mesh 2 gram tube of Diamond Polish Compound 1 - 2.5 Oz. Spray can of Gem Lube 1 - Under wheel Water Fountain 1 - Book “How To Use Diamond Abrasives” 1 - Moffat Flex Lamp with 100 watt Halogen Bulb 1 - Bottle, Water aid, 8 oz., Concentrate 1 - Set of Safety Goggles, Belt Safety Guard, Flanges and Shaft Spacers

Price of Items if Purchased Separately is: $1,366.50

MLS Part #: 290150 Price: $1,298.20

WE HAVE MANY OTHER CONFIGURATIONS OF ARBORS AVAILABLE!! PLEASE GIVE US A CALL FOR A QUOTATION ON A CUSTOM DESIGNED ARBOR SYSTEM!!! ALL ARBOR SYSTEMS SHOWN ARE ALSO AVAILABLE IN STAINLESS STEEL AT ADDITIONAL COSTS. 12 ARBOR PACKAGES “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com MLS “KNAPPER” A Grinding / Sanding Arbor SPECIFICALLY DESIGNED for FLAKE OVER GRINDING Flint Knapping INCLUDES: 1 - ¾" diameter mild steel shaft arbor with 1/3 Hp. Motor, 115 VAC 1 - 6" X 1 1/2" 60 Mesh metal bonded Diamond “HOG” wheel 1 - 6" X 1 1/2" 220 Mesh metal bonded Diamond “CLEAN-UP” Wheel 1 – 2 ½” X 6" Expandable Sanding Drum 3 – Each of 100, 220, 400 and 800 Mesh 2 ½” X 18 15/16" Silicon Carbide water proof cloth Sanding Belts 1 - 6" Felt Polishing Disc with 1/2 Lb. of #61 Rapid Polish 1 – Overhead Watering Drip system 1 – Safety Glasses and Super Sponge 1 - Set of Safety Goggles, Belt Safety Guard, Flanges, Shaft Spacers OPTION #1: Equipped with LANCER Diamond Wheels Price of Items if Purchased Separately is: $1,002.52 MLS Part #: 291010 Price: $902.65 OPTION #2: Upgrade the “KNAPPER” with replacement of the 60 Mesh PLATED “HOG” wheel with a 60 Mesh SINTERED DIAMOND WHEEL (This wheel will give you +20X the life of the plated wheel and cuts at the same FAST speed all of its life):

MLS Part #: 291020 Price: $1,099.65

MLS “BIG KNAPPER” A Grinding / Sanding Arbor SPECIFICALLY DESIGNED for FLAKE OVER GRINDING Flint Knapping INCLUDES: 1 - ¾" diameter mild steel shaft arbor with 1/3 Hp. Motor, 115 VAC 1 - 8" X 1 1/2" 60 Mesh metal bonded Diamond “HOG” wheel 1 - 8" X 1 1/2" 220 Mesh metal bonded Diamond “CLEAN-UP” Wheel 1 – 3" X 8" Expandable Sanding Drum 3 – Each of 100, 220, 400 and 800 Mesh 3" X 25 7/32" Silicon Carbide water proof cloth Sanding Belts 1 - 8" Felt Polishing Disc with 1/2 Lb. of #61 Rapid Polish 1 – Overhead Watering Drip system 1 – Safety Glasses and Super Sponge 1 - Set of Safety Goggles, Belt Safety Guard, Flanges, Shaft Spacers OPTION #1: Equipped with LANCER Diamond Wheels Price of Items if Purchased Separately is: $1,190.27 MLS Part #: 291030 Price: $1,071.60 OPTION #2: Upgrade the “KNAPPER” with replacement of the 60 Mesh PLATED “HOG” wheel with a 60 Mesh SINTERED DIAMOND WHEEL (This wheel will give you +20X the life of the plated wheel and cuts at the same FAST speed all of its life):

MLS Part #: 291040 Price: $1,304.60

The CAB KING 6 by Reentel International All Diamond Grinding/Sanding/Polishing Arbor

1 - ¼ Hp., 1,800 RPM, 115 VAC, Motorized Direct Drive Arbor with clean water pump system 1 - 6" X 1 1/2" 80 and 220 Mesh metal bonded Diamond Wheels 1 - 6" X 1 1/2" 280, 600, 1,200 and 3,000 Mesh resin bonded Diamond Wheels 1 - Polish accessory kit including canvas disc, diamond paste, goggles and apron 1 - 6" 360 Mesh electroplated full face diamond lap 1 - 18" Flex Stem Lamp

Some of the features of the GEM KING 6: Removable plastic pans and removable aluminum hoods Water drainage system to eliminate constant emptying of pans Adjustable fresh water drip system independently adjustable for each wheel Footprint 30" L X 22" W, 1 Box 56 Lb. shipping weight

MLS Part #: 220000 Price: $1,399.00** 13 ARBOR PACKAGES “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

The CAB KING 8 by Reentel International All Diamond Grinding/Sanding/Polishing Arbor

1 - 3/4 Hp., 1,800 RPM, 115 VAC, Motorized Direct Drive Arbor with clean water pump system 1 - 8" X 1 1/2" 80 and 220 Mesh metal bonded Diamond Wheels 1 - 8" X 1 1/2" 280, 600, 1,200 and 3,000 Mesh resin bonded Diamond Wheels 1 - Polish accessory kit including canvas disc, diamond paste, goggles and apron 1 - 8" 360 Mesh electroplated diamond flat lap 1 - 18" Flex Stem Lamp

Some of the features of the GEM KING 8: Removable heavy duty plastic pans and stainless steel hoods Water drainage system to eliminate constant emptying of pans Adjustable fresh water drip system Extremely WIDE wheel spacing Footprint, 42" L X 15.5" W, 3 boxes, 65 Lb., 55 Lb., 25 Lb. SOME ASSEMBLY REQUIRED!!!

MLS Part #: 220100* Price: $2,399.00**

The PIXIE from Diamond Pacific All diamond Grinding / Sanding Arbor 1 - 1/8 Hp., 115 VAC, Motorized Arbor complete with Spray-Mist coolant pump ,splash shields and tray 1 - 4" X 1 ¼" 80 and 220 Mesh GALAXY metal bonded Diamond Wheels 1 - 4" X 1 ¼" 280, 600, 1,200 and 3,000 Mesh NOVA resin bonded Diamond Wheels 1 - 4" Untreated Canvas Polishing Disc 1 - 14,000 Mesh tube of Diamond Polish Compound 1 - 15" Flex Stem Lamp 1 - Geyser under wheel water pump 1 - Safety Glasses, Water Aid, Handy Cab Rest, Instruction Manual

MLS Part #: 200600* Price: $1,529.00**

The GENIE from Diamond Pacific All diamond Grinding / Sanding Arbor 1 - 1/4 Hp., 1800 RPM, 115 VAC, Motorized Arbor complete with Spray-Mist coolant pump ,splash shields and trays 1 - 6" X 1 1/2" 80 and 220 Mesh GALAXY metal bonded Diamond Wheels 1 - 6" X 1 1/2" 280, 600, 1,200 and 3,000 Mesh NOVA resin bonded Diamond Wheels 1 - 5 ½"" Untreated Canvas Polishing Disc 1 - 14,000 Mesh tube of Diamond Polish Compound 1 - 18" Flex Stem Lamp 2 - Geyser under wheel water pumps 1 - Safety Glasses, Water Aid, Handy Cab Rest, Instruction Manual (Note: The magnifier shown no longer comes with the machine shown, this is a option) MLS Part #: 200610* Price: $2,225.00**

The TITAN from Diamond Pacific All diamond Grinding / Sanding Arbor 1 - 3/4 Hp., 1,800 RPM, 115 VAC, Motorized Arbor complete with Spray-Mist coolant pump ,splash shields and tray 1 - 7 5/8" X 1½" 80 and 220 Mesh GALAXY metal bonded Diamond Wheels 1 - 7 5/8" X 2" 280, 600, 1,200 and 3,000 Mesh NOVA resin bonded Diamond Wheels 1 - 5 ½" Untreated Canvas Polishing Disc 1 - 14,000 Mesh tube of Diamond Polish Compound 1 - 24" Flex Stem Lamp 1 - Geyser under wheel water pump 1 - Safety Glasses, Water Aid, Handy Cab Rest, Instruction Manual (Note: Only one lamp comes with the unit, the second lamp in shown in the picture is an option.) MLS Part #: 200620* Price: $3,740.00**

* - Item not normally stocked, special order item. ** - Special shipping charge for item. 14 ROCK DRILLING SYSTEMS & ROUTER TABLE “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com ROCK DRILLING SYSTEM DELUXE ROCK DRILLING SYSTEM

NOTE: THIS SYSTEM IS DESIGNED FOR A DRILLING A MAXIMUM OF ¼” Dia. HOLES EVERYTHING YOU NEED TO DRILL HOLES IN ROCKS. SYSTEM NOTE: THIS SYSTEM IS DESIGNED FOR A DRILLING A MAXIMUM OF ¼” Dia. HOLES INCLUDES: EVERYTHING YOU NEED TO DRILL HOLES IN ROCKS. SYSTEM 1 - INDUSTRIAL GRADE DRILL PRESS, Variable speed INCLUDES: motor with 2 ranges 0 to 3,000 RPM and 0 to 5,000 RPM, 115 VAC 1 - 3 Speed Drill Press, 1,000, 2,500 & 5,000 RPM, 115 VAC 1 - Integral DIGITAL Depth Gauge 1 - Coolant delivery system. System includes Tank, Pump 1 - Coolant delivery system. System includes Tank, Pump and Magnetic Base delivery spray nozzle with and Magnetic Base delivery spray nozzle with interchangeable nozzles interchangeable nozzles 6 - Spare, Extra-Fine Nozzles (Red) 6 - Spare, Extra -Fine Nozzles (Red) 1 - Maple Drilling Block 1 - Maple Drilling Block 1 - 8 Oz. bottle Diamond Lube 1 - 8 Oz. bottle Diamond Lube 1 - Stainless Steel Magnetic Base coolant recovery/splash 1 - Stainless Steel Magnetic Base coolant recovery/splash tray tray 1 - Adjustable Mini-Vise 1 - Adjustable Mini-Vise 1 pkg. - 6 pc. Diamond Drill Bit Assortment, ¾ mm to 1 pkg. - 6 pc. Diamond Drill Bit Assortment set, 1 mm to 2 ½ mm 3 ½ mm MLS Part #: 293000 Price: $424.30 MLS Part #: 293010 Price: $499.95 PARTS FOR ROCK DRILLING SYSTEM The GRYPHETTE router table MLS PART EQUIPMENT DESCRIPTION PRICE diamond grinder is just what is NUMBER needed to preshape your cabs. CHUCK KEY for Rock drilling System Large 6 5/8" by 6 5/8" table 293101 $7.90 allows large pieces to be edge 293102 DRIVE BELT for Rock Drilling System $10.00 ground. Includes water splash CHUCK KEY for Deluxe Rock drilling guard. 293151 System $10.60 DRIVE BELT for Deluxe Rock drilling The Gryphette is made from 293152 System $9.15 engineered high impact plastic with a 5 year warranty on parts Complete COOLANT DELIVERY and workmanship. 293200 SYSTEM with Tank, Pump, X-former, $56.95 Powerful DC motor operates off of 110 VAC. Unit comes with ¾" Mag. Base Nozzle Stand diamond grinder bit. 293210 EXTRA FINE (Red) Nozzles, 6 pc. $8.95 Extra PUMP and X-FORMER for MLS Part #: 292000 Price: $81.25 293220 Coolant delivery System $25.95 GRYPHETTE 293300 MAPLE DRILLING BLOCK $7.50 GRINDING HEADS 293400 STAINLESS STEEL MAGNETIC TRAY $20.00 AVAILABLE 293500 ADJUSTABLE MINI VISE $21.95 See page 42 LAMP or TAPER 15 LARGE EQUIPMENT “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com Lortone VIBRATORY LAPS PARTS LORTONE COMBINATION UNIT, MLS PART EQUIPMENT DESCRIPTION PRICE MODEL LU6X-130 NUMBER 250200 15" GRIND PAN, Fits either Lortone $112.00 This popular complete combination unit can complete each step from OLD FL or NEW OS Models FLAT LAP rough to finish cabochons in one compact, durable and economical 250205 15" POLISH PAN, Fits either Lortone $119.00 machine. Sealed rubber mounted ball bearings and ¾" shaft OLD FL or NEW OS Models FLAT LAP shouldered to ½" for the 6" trimming blade. Hinged wheel guard shield 20" GRIND PAN, Fits either Lortone for easy wheel access and cleaning. Unit is designed with saw blade 250210 OLD FL or NEW OS Models FLAT LAP $185.00 coolant tank, blade guard, water fittings and drain plugs, 1/3 Hp. Motor, 115 VAC, motor mount, pulleys, belt, belt guard clear plastic splash 250215 20" POLISH PAN, Fits either Lortone $195.00 hood over trim saw, trim saw vise, cab templates, aluminum scribe, OLD FL or NEW OS Models FLAT LAP cerium oxide polish, dop sticks, dop wax, 6" X 1" 100 mesh silicon 15" FELT POLISH PAD, Fits either carbide grinding wheel, 6" X .025" diamond saw blade, 6" X 2 ½" 250220 Lortone OLD FL or NEW OS Models $13.50 Lortone EXP sanding drum, 3 silicon carbide sanding belts and one FLAT LAP polishing disc with rubber and felt pad installed. 20" FELT POLISH PAD, Fits either 250230 Lortone OLD FL or NEW OS Models $16.90 This is a great introductory unit for the lapidary arts!!!! FLAT LAP Lortone OLD Series FL SUSPENSION LU6X-130 250240 BALLS, Set of 3 $11.75 Lortone OLD Series FL PAN 250250 CENTERING SPRINGS, Set of 3 $8.00

A complete line of parts are available for both the Lortone OLD model FL and NEW model OS VIBRATORY FLAT LAPS. Please call for price and availability. LORTONE

MLS Part #: 260000 Price: $770.00

VI-BRO LAP Totally reengineered in 2010. Faster cutting, very quiet operation. New larger motor. Motor is isolated from the vibrating portions of the lap. DIAMOND PACIFIC - VI-BRO-LAPS brand flat laps are industrial Power is transmitted from the grade equipment. The tempered aluminum lap plate is grooved in a crisscross pattern. This permits abrasive particles to circulate between motor to the pan via a rubber v- the lap plate and the work piece so that the abrasive itself is belt. continuously being crushed to a smaller size. When the work piece surface is ground flat and satin smooth, the lap plate is turned over to the other side on which a polishing pad is cemented. Using a polishing VIBRATING/OSCILLATING FLAT LAPS compound on this pad, a fine mirror like finish is produced on the work Flat vibratory/oscillating laps are used to polish flat surfaces on rocks. piece. We feature the Lortone brand but also handle several other brands of vibratory laps including Covington, Raytech and Diamond Pacific. The unit is constructed from a heavy duty welded steel frame. The grinding plate is suspended by aircraft strength cable. Unit is driven by The Lortone laps are rugged vibrating laps for fast precision grinding of a 1/3 Hp. Motor, 115 VAC. slabs, geodes, bookends, clock faces and other flat stones. Pans MLS PART change in seconds. Quiet, fast and efficient trouble free operation; ideal EQUIPMENT DESCRIPTION PRICE for the hobbies. Both units come with 115 VAC motors standard. NUMBER FLAT LAP, Diamond Pacific, Model 251000* $2,010.00** MLS PART 20VL, 20" Dia. EQUIPMENT DESCRIPTION PRICE NUMBER FLAT LAP, Diamond Pacific, Model $2,330.00** FLAT LAP, Lortone, Model OS-15, 15" 251010* 27VL, 27" Dia. 250100 Dia., TWO PAN SYSTEM $890.00** 250110 FLAT LAP, Lortone, Model OS-20, 20" $995.00** A complete line of parts are available for Diamond Pacific Dia., TWO PAN SYSTEM VI-BRO-LAPS. Please call for price and availability. * - Item not normally stocked, special order item. ** - Special shipping charge for item. 16 LARGE EQUIPMENT “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

UNIVERSAL HEAVY DUTY GRINDING AND POLISHING MACHINE by AMERITOOL Each Ameritool Machine Includes: 1 - ¼ Hp. Variable speed Ball Bearing DC Motor with 115 VAC converter and coolant reservoir with splash shield 1 - Accessory Kit Containing: 1 - 180 Mesh diamond Grinding Disc. Disc is hydraulically pressed to a backing plate 1 - Each of a 325, 600 and 1,200 Mesh Diamond Sanding PSA Disc with backing plates 1 - White Polish Pad with 14,000 Diamond Polish compound and backing plate 6" UNIVERSAL HD, complete with accessories MLS PART #: 252010 Price: $559.00 6" BASIC, without discs and accessories MLS PART #: 252020 Price: $399.00

8" UNIVERSAL HD, complete with accessories MLS PART #: 252030 Price: $659.00 8" BASIC, without discs and accessories MLS PART #: 252040 Price: $399.00

ALL-U-NEED HORIZONTAL LAP MACHINE by HI-TECH DIAMOND Each Hi-Tech Diamond Machine Includes: 1 - ¼ Hp. Variable speed Ball Bearing DC Motor with 115 VAC converter and coolant reservoir with splash shield 1 - Accessory Kit Containing: 1 - 180 Mesh Metal Bond Diamond Grinding Disc 1 - Each of a 325, 600 and 1,200 Mesh Diamond Sanding PSA Disc with backing plates 1 - White Polish Pad with 14,000 Mesh, 2 gr. Diamond Polish compound and backing plate 6" ALL-U-NEED, complete with accessories: MLS PART #: 280010 Price: $489.50 6" ALL-U-NEED BASIC, without discs and accessories: MLS PART #: 280020 Price: $389.00

8" ALL-U-NEED, complete with accessories: MLS PART #: 280030 Price: $589.95 8" ALL-U-NEED BASIC, without discs and accessories: MLS PART #: 280040 Price: $399.00

SLANT CABBER by HI-TECH DIAMOND The SLANT CABBER is a unique angled flat lap machine that allows for easy viewing while you grind flats, rework quartz crystals or make millimeter and free-form cabochons. The angled design allows the user to easily see the material they are working on. Each SLANT CABBER machine Includes: 1 - ¼ Hp. Variable speed Ball Bearing DC Motor with 115 VAC converter and coolant reservoir with splash shield 1 - Accessory Kit Containing: 1 - 180 Mesh Metal Bond Diamond Grinding Disc 1 - Each of a 325, 600 and 1,200 Mesh Diamond Sanding PSA Disc with backing plates 1 - White Polish Pad with 14,000 Mesh, 2 gr. Diamond Polish compound and backing plate 6" ALL-U-NEED, complete with accessories: MLS PART #: 280110 Price: $499.50 6" ALL-U-NEED BASIC, without discs and accessories: MLS PART #: 280120 Price: $399.50

8" ALL-U-NEED, complete with accessories: MLS PART #: 280130 Price: $599.50 8" ALL-U-NEED BASIC, without discs and accessories: MLS PART #: 280140 Price: $419.00 17 LARGE EQUIPMENT Order Toll Free: (888) 612-3444 “YOUR LAPIDARY GENERAL STORE” Web Site: www.lapidarysupplies.com The BD-125 PORTABLE WET DIAMOND POLISHER by Barranca/MK Diamond This is one of the best equipment items to come on the market in the last few years. The equipment consists of a variable speed right angle grinder with a specially adapted water injection head, the water is injected in the center of the shaft. The other innovation is a set of diamond impregnated resin discs held on to the head with Velcro. Disc change takes seconds!!! I use one of these myself and love it. I am still using most of my original discs 8 years later. Complete Kit comes With: 1 - Wet Electric Polisher with plug-in G.F.I., 115 VAC 1 - Set of 10 - 4" Diamond Resin Pads, 30 to 13,000 Mesh 1 - 4" Rubber Velcro Backer 1 - 4" Coarse Brazed Diamond Hard Wheel 1 - 4" Flat Surfacing Hard Wheel 1 - Set of Wrenches 1 - Carry Case and Instruction set The BD-125 Wet Diamond Grinder/Sander/Polisher Kit MLS Part #: 261000 Price: $680.00

MLS PART MLS PART PRICE PRICE NUMBER PARTS DESCRIPTION NUMBER PARTS DESCRIPTION 261002 4" RUBBER VELCRO BACKER PAD $18.00 4" RESIN DIAMOND FLEX DISC, 800 261018 Mesh Diamond $40.00 261004 4" TURBO DIAMOND DISC, Hard Disc, $130.00 Coarse, Very aggressive grinding 4" RESIN DIAMOND FLEX DISC, 1,800 261020 Mesh Diamond $40.00 261006 4" FLAT FACING DIAMOND DISC, Hard $150.00 Disc, Medium Mesh Diamond 4" RESIN DIAMOND FLEX DISC, 3,500 261022 Mesh Diamond $40.00 261008 4" RESIN DIAMOND FLEX DISC, 30 $40.00 Mesh Diamond 4" RESIN DIAMOND FLEX DISC, 8,500 261024 Mesh Diamond $40.00 261010 4" RESIN DIAMOND FLEX DISC, 50 $40.00 Mesh Diamond 4" RESIN DIAMOND FLEX DISC, 261026 10,000 Mesh Diamond $40.00 261012 4" RESIN DIAMOND FLEX DISC, 120 $40.00 Mesh Diamond 4" RESIN DIAMOND FLEX DISC, 261028 13,000 Mesh Diamond $40.00 261014 4" RESIN DIAMOND FLEX DISC, 220 $40.00 Mesh Diamond 261030 MOTOR BRUSHES, Set of 2 $14.00 4" RESIN DIAMOND FLEX DISC, 400 261032 INDUSTRIAL GRADE G.F.I. $70.00 261016 Mesh Diamond $40.00 261034 4" FELT BUFF PAD, Velcro backed $18.00 POWERED HAND TOOL by FOREDOM MLS Stocks the #2272 GENERAL APPLICATIONS KIT. This kit includes: 1 - “SR” Type Powered Head, ball bearing motor, 1/6 Hp. Reversible, 18,000 RPM max., 115 VAC 1 - No. 30 Hand piece (Equipped with #0 Jacobs Chuck) 1 - FCT Foot Control 1 - No. 21 Accessory Kit (84 piece “Bit and Burr” Kit) 1 - CK-0 Chuck Key with Plastic Handle 1 - Tube of Shaft Grease

#2272 GENERAL APPLICATIONS KIT MLS PART #: 240000 Price: $345.00 LAPIDARY SPEC. POWERED HAND TOOL by FOREDOM MLS “SPECIAL” LAPIDARY APPLICATIONS Kit. This kit includes: 1 - “LX” Type Powered Head, ball bearing motor, 1/6 Hp., High Torque, Slow Speed (5,000 RPM max.),115 VAC. H-30 HAND 1 – Table Hanger C-clamp Mounted. PIECE MOTOR 1 - No. 30 Hand piece (Equipped with #0 Jacobs Chuck). Model LX Power Head TABLE 1 – TXR Speed Foot Control. NEW MOUNT 1 – 50 pcs. Mega Burr, Diamond Plated Burr set. 1 - CK-0 Chuck Key with Plastic Handle. 50 pc. DIAMOND 1 - Tube of Shaft Grease BURR SET MLS “SPECIAL” LAPIDARY APPLICATIONS KIT MLS PART #: 240100 Price: $443.70 18 LARGE EQUIPMENT “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

H.15 Handpiece, Turn your Foredom Powered Hand Tool Plastic mini vise. Has hor. and Zinc die cast mini vise. Has hor. into a mini “JACKHAMMER”. Table top “Yoke” mount for ver. “v” grooves for holding small and ver. “v” grooves for holding Great for detailing fossils and your Foredom power heads. round pieces. Jaw capacity 1 ½" small round pieces. Jaw clean-up of specimens. Made of cast iron. deep 1 3/16" wide. capacity 1 ½" deep 1 3/16" wide. MLS PART #: 241016 MLS PART #: 241010 MLS PART #: 241004 MLS PART #: 241012 Price: $18.00 Price: $26.00 Price: $139.00 Price: $49.00

DRILL PRESS STAND by Foredom

A rugged and precise stand which converts your Foredom flexible shaft power tool into a drill press. The Table top SPEED control. Set sturdy, all metal stand is fully Wrap your fingers and save the dial to desired speed. adjustable, has a 2" throat capacity them. Give your fingers a Replaces foot type speed “rubber tip”. Roll is 2" by 15'. and a stroke length up to 1 ¼". controls for series SR motors. MLS PART #: 241008 MLS PART #: 241022 MLS PART #: 241018 Price: $169.00 Price: $4.30 Price: $69.00

Table mount DISC GRINDER HEAD KIT motor hanger by Foredom for your Foredom rotary power Tool fits on the standard heads. H-30 hand piece only. Mounts to Turns your Foredom rotary table ledge tool into a right angle Disc with metal c- Grinder. clamp. HEAD WITH FLAPPER SANDING DISC Use this device to store HEAD ATTACHED TO H-30 HAND PIECE and organize your points Alternate Some of the many functions you can perform and burs. Holds many base to screw with this tool include hog out wood, smooth dozens of burs with various to work bench metal, polish stone and/or blend and texture shank sizes including is available metals. 1/16", 3/32", 1/8" and 1/4" for $20.00 diameter shafts. 7" wide more. Complete LAPIDARY kit includes wrenches needed to attach the and 4" tall. grinder head to the H-30 hand piece. Kit also includes:

MLS PART #: 241006 MLS PART #: 241014 1 – Angle Grinder Head. Price: $16.50 Price: $49.00 1 – 60 Mesh flexible Diamond PSA GRINDING disc. 5 – Imperial micro finish film PSA SANDING discs, 120, No. CK-0 CHUCK KEY. #0 Chuck 220, 320, 600 and 1,200 Mesh Diamond. Key in Plastic Handle. For #30, 1 – 4,000 Mesh Diamond PSA SANDING disc. 30SJ, 25C and 30H hand pieces. 1 – 50,000 Mesh Cerium Oxide PSA POLISHING disc. MLS PART #: 241002 1 – 8 pk. Securing Discs, Velcro one side/PSA other side. Used to attach discs to hook mandrel. Price: $6.00 1 – Rubber hook type disc Mandrel. H-30 Handpiece with 3 jaw chuck 1 – Screw-Lok FELT Wheel, 5/16" thick and chuck key. Replace the 1 – Misc. including drive pin, long hub with long screw. original or use as an alternative. Fits all Fordomes. MLS PART #: 242000 Price: $145.00 MLS PART #: 241020 Price: $68.00 19 LARGE EQUIPMENT & SAWS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

PARTS FOR FOREDOM CUT-OFF TOOL STONE CARVERS KIT by Foredom MLS PART PRICE NUMBER PARTS DESCRIPTION FOR USE WITH CUT-OFF TOOL (All Discs 2" Dia.) LONG HUB, for mounting grinding wheel [PADS RATED FOR 10,000 R.P.M., PADS SHOULD BE RUN WET, 242010 and Felt Buffs (Extra – comes with kit). $4.00 MOUNT ON HOOK MANDREL] 2" FLEXIBLE RUBBER HOOK 242020 MANDREL, For mounting sanding discs. $6.30 COMES WITH FOLLOWING DISCS: 1 – 60 Mesh METAL BOND DIAMOND GRINDING DISC 242030 2" P.S.A./LOOP BACK. Apply to various $4.40 1 – 120 Mesh RESIN BOND DIAMOND SANDING DISC grinding/sanding/polish discs, 5 pcs. 1 – 220 Mesh RESIN BOND DIAMOND SANDING DISC 2" 100 Mesh, SILICON CARBIDE 1 – 320 Mesh RESIN BOND DIAMOND SANDING DISC 242040 GRINDING WHEEL, Mounts with LONG $6.80 1 – 400 Mesh RESIN BOND DIAMOND SANDING DISC HUB, (15,000 R.P.M. Max.). 1 – 600 Mesh RESIN BOND DIAMOND SANDING DISC 2" METAL BOND GRINDING DISC, 60 1 – 1,200 Mesh RESIN BOND DIAMOND SANDING DISC 242050 Mesh Diamond, Mounts on HOOK $17.30 1 – 4,000 Mesh RESIN BOND DIAMOND SANDING DISC MANDREL, P.S.A. Backed. 2- 50,000 Mesh RESIN BOND CERIUM OXIDE POLISH DISCS 2" METAL BOND GRINDING DISC, 120 10 – P.S.A./LOOP BACKING PADS 242060 Mesh Diamond, Mounts on HOOK $13.90 MANDREL, P.S.A. Backed. MLS PART #: 242500 Price: $68.00 2" METAL BOND GRINDING DISC, 220 242070 Mesh Diamond, Mounts on HOOK $11.80 NOTE: WHEELS or DISCS, EXCEPT FOR THE MANDREL, P.S.A. Backed. ALL FELT WHEELS BE RUN WET!!!! ALL DISCS 2" METAL BOND GRINDING DISC, 400 MUST 242080 Mesh Diamond, Mounts on HOOK $9.70 ARE SUPPLIED WITH P.S.A. BACKS AND MUST MANDREL, P.S.A. Backed. HAVE A “LOOP BACKER PAD” (MLS Part # 242030) 2" METAL BOND GRINDING DISC, 800 APPLIED TO THEM. ALL DISCS ARE RATED AT 242090 Mesh Diamond, Mounts on HOOK $9.70 10,000 R.P.M. MAXIMUM!!! WHEEL RATINGS ARE MANDREL, P.S.A. Backed. NOTED FOR EACH WHEEL. 2" RESIN BONDED SANDING DISC, 242100 120 Mesh Diamond, Mounts on HOOK $4.70 MANDREL, P.S.A. Backed. SAWS 2" RESIN BONDED SANDING DISC, 242110 220 Mesh Diamond, Mounts on HOOK $4.60 MANDREL, P.S.A. Backed. 4" TRIM 2" RESIN BONDED SANDING DISC, (FACETERS) SAW 242120 320 Mesh Diamond, Mounts on HOOK $4.60 MANDREL, P.S.A. Backed. by AMERITOOL The Ameritool 4" Trim Saw is the 2" RESIN BONDED SANDING DISC, perfect tool for trimming glass, 242130 400 Mesh Diamond, Mounts on HOOK $4.60 cabochons pre-forms and valuable MANDREL, P.S.A. Backed. faceting materials. The large table has no inhibiting lip, making it easy to trim oversized slabs. The guard can be raised to 2" RESIN BONDED SANDING DISC, accommodate oversized slabs. The housing is made of durable polyethylene. The variable 242140 600 Mesh Diamond, Mounts on HOOK $4.60 speed ¼ Hp. Direct drive motor, 115 VAC, runs fast enough to se ultra thin blades and MANDREL, P.S.A. Backed. powerful enough for up to 5" sintered diamond blades. Uses water based lubricants. Removable table top makes for easy clean-up. 2" RESIN BONDED SANDING DISC, MLS PART EQUIPMENT DESCRIPTION PRICE 242150 1,200 Mesh Diamond, Mounts on HOOK $4.60 NUMBER MANDREL, P.S.A. Backed. 4" TRIM SAW By Ameritool with Blade 2" RESIN BONDED SANDING DISC, 271100 and Vise. $448.00 4,000 Mesh Diamond, Mounts on HOOK 242160 $8.20 4" TRIM SAW By Ameritool with BLADE MANDREL, P.S.A. Backed. 271110 only NO Vise. $359.00 2" RESIN BONDED CERIUM OXIDE VISE ASSEMBLY for 4" Trim Saw by POLISH DISC, 50,000 Mesh, Mounts on 242170 $5.90 271120 Ameritool $89.00 HOOK MANDREL, P.S.A. Backed. 2" KNIFE EDGE HARD FELT WHEEL, 242180 Mounts with LONG HUB, charge with $5.80 WE STOCK MANY REPLACEMENT your choice of polish (20,000 R.P.M. Max.). PARTS FOR LORTONE SAWS, PLEASE 2" HARD FELT WHEEL, ¾” thick, 242190 Mounts with LONG HUB, charge with $15.50 CONTACT US IF YOU ARE LOOKING your choice of polish (20,000 R.P.M. Max.). FOR PARTS, IF WE DON’T HAVE IT IN STOCK WE CAN ORDER IT FOR YOU. 20 LARGE EQUIPMENT & SAWS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

6" BASIC TRIM SAW by Lortone 7" TRIM SAW by Barranca AFFORDABLE machines that are quality built and don’t cost an arm EXTREME heavy duty designed and constructed. Features include and a leg! You can get the job done with this trim saw. Painted mild 14" X 14" cutting table, direct drive 1/3 Hp. Motor, cast aluminum steel body with stainless table. Recommended for use with OIL, 1 qt. wetted parts. Table tilts up and out of the way for cleaning. Includes capacity. This unit takes up to a 6" diameter diamond blade. Uses ball fluid drain hose and sludge drain plug. Vise with vertical rock clamp bearings capable of high speed operation with thin blades. Unit is and adjustable locking cross feed. PETG high impact clear copolymer basic and does not include blade or motor. ½" arbor size. splash hood. Includes MK-303 7" blade. Unit requires 2 quarts of coolant. WATER BASED OR OIL LUBRICANTS CAN BE USED!!

MLS Part #: 272100 Price: $149.00

Optional STEEL MOUNTING BASE for 272120 SAW and NEMA 48 motor. $42.50

6" TRIM SAW by Hi-Tech Diamond MLS Part #: 272600 Price: $765.00 All ENGINEERED plastic construction make this saw usable with WATER!!! Saw has powerful ¼ Hp. variable speed motor. LARGE The below listed trim saw is, in my opinion, the BEST table/work surface 6 ½" W X 13" L. Very easy cleanup takes 2 or 3 trim saw on the market today!!!!! minutes. FS8-C TRIM SAW by Lortone This trim saws provide a spacious work table and sintered blade can accommodate larger slabs. To clean, just lift up the table and slide out the coolant pan. This is the easiest trim to clean I have ever used. Saw Complete units include hood, vise, belt guard, belt and 1/3 Hp. Motor, shown 115 VAC, Requires 4 ½ quarts coolant. This saw comes in 2 with vise. configurations, semi-stainless steel (Table) or all Stainless Steel. The semi-stainless steel constructed saw, you must use OIL as a coolant. The all stainless steel saw you can use WATER or OIL coolants.

MLS PART PRICE NUMBER PARTS DESCRIPTION 272200 6" SAW and BLADE, NO VISE $439.00 272210 6" SAW, BLADE and VISE $539.00 FS8-C 272220 VISE $116.70 Lortone MK-170 by MK Diamond LORTONE This economical, heavy-duty trim saw has a large work surface and is equipped with a MK 303 7" X .065 sintered blade. Includes a sealed FS8-C COMPLETE 8" TRIM SAW - SEMI-STAINLESS STEEL CONF. ball bearing ½ Hp. motor, 115 VAC, splash shield, blade guard and MLS Part #: 272300 Price: $680.00 submersible water pump. You can use WATER as a cutting coolant/ FS8-C COMPLETE 8" TRIM SAW - ALL STAINLESS STEEL CONF. lubricant. MLS Part #: 272310 Price: $750.00

MLS PART PRICE NUMBER PARTS DESCRIPTION MK DIAMOND 272320 HOOD, Plastic, for LU6X $47.00 272321 HOOD, Plastic, for FS6 $58.00 272322 HOOD, Plastic, for FS8 and TS10 $58.00 272323 HOOD, Plastic, for TS8 $49.00 MK-170 272330 VISE, for LU6X $37.50 272331 VISE, for FS6 $37.50 MLS Part #: 272400 Price: $282.00 272332 VISE, for FS8 $37.50 272333 VISE, for TS8 $37.50 21 SAWS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

10" TRIM SAW by Lortone LS12 SLAB SAW by Lortone construction allows use of water, water ALL STAINLESS STEEL This quiet, fully enclosed, professional quality 12" saw is a real based or oil coolants!!! Heavy-duty construction, you can turn this saw workhorse. The full hinged hood keeps oil mist contained and has a on and cut for 8 hours straight without fear or overloading the motor. safety “glass” window for viewing. It features a fixed rate of feed of 8" Large 14 1/4” by 16 5/8" work surface. Complete with MK-303 10" X per hour. A large capacity vise holds 4 ½" high X 7" long rough. The .040" X 5/8" sintered rim blade, manually moved vise, belt guard, plastic cross feed allows several cuts without repositioning. Complete with MK- hood and 1/3 Hp. overload protected motor, 115 VAC. Saw requires 2 303 12" X .062" X 5/8" sintered rim blade and 1/3 Hp. Overload quarts of cutting fluid. WATER OR OIL BASED CUTTING protected motor, 115 VAC. Saw requires 2 gallons of cutting oil. OIL FLUIDS !!!! BASED CUTTING FLUIDS ONLY!!!

Lortone LORTONE

LORTONE LS12C TS10-C

TS10-C COMPLETE 10" HEAVY-DUTY TRIM SAW LS12C COMPLETE 12" SLAB SAW MLS Part #: 272250 Price: $799.00** MLS Part #: 272700 Price: $1,580.00** 10" TRIM / SLAB SAW by Covington PANTHER LSS-14P SLAB SAW by Lortone Use this saw to cut rocks, minerals and glass. Comes complete with This high performance saw delivers straight, smooth cuts at twice the power driven vise for slabbing, allows a cross feed distance of 3 ½” speed of other Lortone saws. It’s quiet, clean, bench top design without reclamping. “Bulldog” vise swings out of the way for hand increases your cutting capacity without extra space. Constructed with trimming. Motor and saw are mounded on an integral cushioned removable bottom pan for easy clean-up. Power feed rate is fixed at 15" laminated base. Hold down hook runs under the tabletop so work pieces per hour. A large capacity vise holds 5 1/2" high X 6 1/2" long rough. can’t climb over the blade. Complete with Covington 10" “GOLD” blade, The cross feed allows several cuts without repositioning. Complete with plastic shield, belt guard and 1/3 Hp. overload protected ball bearing MK-303 14" X .070" X 5/8" sintered rim blade and 1/2 Hp. overload motor, 115 VAC. Saw requires 1 gallon of cutting oil. OIL BASED protected ball bearing motor, 115 VAC. Saw requires 2 ½ gallons of CUTTING FLUIDS ONLY!!! cutting oil. OIL BASED CUTTING FLUIDS ONLY!!!

Drawing for Clarity

LSS-14P 1510TS

Picture of Actual Saw

LORTONE COVINGTON

Model 1510TS COMPLETE TRIM / SLAB SAW LSS-14P COMPLETE 14" SLAB SAW MLS Part #: 272450 Price: $1,049.00** MLS Part #: 272800 Price: $1,890.00** * - Item not normally stocked, special order item. 22 ** - Special shipping charge for item. SAWS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com LS18 SLAB SAW By Lortone This rugged, accurate and economical 18" slab saw has been proven EASY CLEAN by years of trouble free performance in commercial operations. Convenient free standing design allows it to go next to a work bench. By NEW The frame, drive guard and tank are constructed of heavy gauge Easy Clean, LLC welded steel for long life. Easy access is provided by the hinged hood making loading and set-up simple. The side window permits You know that headache of cleaning out monitoring of the cut. Features shutoff switch, threaded cross feed, the sludge from your SLAB SAW. sealed ball bearings and adjustable feed rate of 9 ½" to 19 ¼" per hour. NEVER AGAIN!!! The Easy Clean A large capacity vise holds 7" high X 7" long rough. The cross feed cleans and recycles your saw oil. With it allows several cuts without repositioning. Complete with MK-303 18" X in use on your slab saw, you may never .125" X 3/4" sintered rim blade, 1/2 Hp. overload protected ball bearing need to clean the sludge out of your saw motor, 115 VAC and 2" drain. Saw requires 3 1/2 gallons of cutting oil. again. Original BELT DRIVEN with OIL BASED CUTTING FLUIDS ONLY!!! accessories shown Easy Clean acts like a centrifuge and collects the sludge in a metal 1 gallon paint can that obtains a putty like consistency. The equipment can be used on a single saw of multiple saws. (I am rigging mine to service 4 saws.) Runs on 110 Vac. Power from a normal wall outlet and consumes about 500 watts (½ Hp.). LS18 System available 2 ways, complete sludge separation unit with no accessories or the complete sludge separation unit with accessories. Accessories include oil pump, fittings, tank strainer hook-up hose and fittings. ORIGINAL BELT DRIVEN SYSTEM WITHOUT ACCESSORIES LORTONE MLS Part #: 273000* Price: $1,050.00** ORIGINAL BELT DRIVEN SYSTEM WITH ACCESSORIES MLS Part #: 273010 Price: $1,250.00** “NEW” DIRECT DRIVE SYSTEM WITH ACCESSORIES MLS Part #: 273020* Price: $1,350.00**

PUMPS LS18 COMPLETE 18" SLAB SAW MLS Part #: 272900* Price: $3,800.00**

LIGHT DUTY MLS PART EQUIPMENT DESCRIPTION PRICE WATER PUMP NUMBER HP18 18" SLAB SAW By Barranca, equipped with 18" premium sintered 272950* rim blade, variable rate feed, bronze $5,865.00** clutch system on feed, 1 ½ Hp. OIL & WATER Motor, cuts 6 ½" high by 9" long. PUMP MODEL 703HDS 18" SLAB SAW By Covington, equipped with 18" HEAVY DUTY 272960* premium notched rim blade, variable $4,300.00** WATER PUMP rate feed, clutch system on feed, ½ Hp. Motor, cuts 6 ½" high by 9" long. MLS PART PRICE NUMBER PARTS DESCRIPTION HP24 24" SLAB SAW By Barranca, equipped with 24" premium sintered PUMP for Water (Not for use with Oil), 272970* rim blade, variable rate feed, bronze $6,930.00** 812010 Great for use with arbors, flat laps and $65.00 clutch system on feed, 1 ½ Hp. wet diamond polisher, Submersible, 115 Motor, cuts 9" high by 18" long. VAC., 8 ‘ Head, LIGHT DUTY!!! HP30 30" SLAB SAW By Barranca, PUMP for Water (Not for use with Oil), equipped with 30" premium sintered 810010 Great for use with arbors, wet diamond $90.00 272980* rim blade, variable rate feed, bronze $8,133.00** polisher and saws, Submersible, 115 clutch system on feed, 2 Hp. Motor, VAC., 7 ‘ Head, Very HEAVY DUTY!!! cuts 12" high by 18" long. PUMP for OIL or Water, Great for use MODEL 199HDS 36" SLAB SAW with saws and other tools requiring a By Covington, equipped with 36" 811010 forced feed oil supply (e.g. - Lortone $120.00 272990* premium sintered rim blade, variable $12,000.00** LS14 Drop Saw), Submersible, 7.4' rate feed, clutch system on feed, 2 Head, 115 VAC. Hp. Motor, cuts 15" high by 26" long. * - Item not normally stocked, special order item. 23 ** - Special shipping charge for item. SAWS / LARGE EQUIPMENT “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com MODEL C DIAMOND BAND SAW by Gryphon A fast cutting diamond band saw for glass, tile, gemstones and ceramic ZEPHYR RING SAW by Gryphon materials. Cuts different shapes with ease. Cuts a radius as tight as 3/16". Smooth saw cuts eliminate excessive grinding. A new saw just out by Gryphon. Similar in design to the Wear resistant blade travels at 2,000 feet per minute. Direct other ring saws on the market. Cutting head removes to drive motor eliminates pulleys. Blade guide beneath the become a portable unit. Unit has a deep throat and large work surface provides superior support leaving the work table with an unobstructed view. Constructed of table unobscured. Unit constructed of engineered glass engineered glass filled plastics, 115 VAC motor. USES filled plastics, 115 VAC motor. USES WATER ONLY WATER AS COOLANT! AS COOLANT!

GRYPHON

Model C GRYPHON

MLS Part #: 275000 Price: $406.65

MLS Part #: 272500 Price: $415.00 MLS PART PRICE NUMBER PARTS DESCRIPTION MLS PART BLADE, Diamond, Replacement for PARTS DESCRIPTION PRICE NUMBER 275100 Zephyr Ring Saw $45.50 272510 BLADE, Diamond, for Gryphon Model C. $60.95 275110 DRIVE BELT for Zepher Ring Saw. $32.00 272514 FUSERS BLADE, Diamond, for Gryphon $69.55 RUBBER INSERTS for Drive wheels, Model C. 275120 Set of 3 for Zephyr Ring Saw. $10.20 BLADE GUIDES, for Gryphon Model C 275130 GUIDE WHEEL with Bearing. $24.00 272520 Diamond Band Saw, Package of 4. $7.00 IDLER WHEEL with Bushings. MAINTENANCE REBUILD KIT for 275140 $20.00 272532 Model C Saw, Includes upper and lower $20.50 wheel bands and lower wheel bearing. GRYPHON STUDIO GRINDER WET BELT SANDER/ by Gryphon GRINDER by Gryphon This grinder is used to put a finishing GRYPHON A fast cutting silicon carbide wet edge on rocks and glass. Can also be used to “rough” grind cabs or belt sander. For fast removal of groove an edge of a cab or slab. A stock. This new Gryphon larger version of the “GRYPHETTE” product presents an entirely new (as shown on page 15). Larger category of tool for the lapidary table, splash shield and gravity feed artist. With the large 90 square watering system, Powerful 1/5 Hp. inches of grinding surface, you DC motor running at 3,000 RPM.. can now accurately sand straight Uses the same cutting bits used by lines or true up large curved the Gryphette. Table measures 9 ¾” by 9 “. surfaces. A small platform helps USES WATER ONLY AS COOLANT! to steady your work and tilts for easy beveling. A variety of belts available form coarse to ultra MLS Part #: 292100 Price: $120.00 smooth for polishing. Motor is GRINDING 115 VAC. USES WATER HEADS ONLY AS COOLANT! AVAILABLE See page 42 LAMP or TAPER MLS Part #: 274000 Price: $294.15 See page 34 for Belts 24 SPHERE CUTTERS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com MINI SPHERE GRINDER by Covington Grind spheres ¼" to 1" diameter. Dual 1/18 Hp. Motors, 115 VAC, automatic grit application, spring loaded cutting heads and cutting angle adjustment. The downward slanted cutter cups and shafts run the sphere in a bath of grit. This eliminates the need to constantly dab grit with a brush. The angle of the cutting cups can be increased as the rough corners of the sphere grind off. Both heads are spring loaded, so continuous adjustment is unnecessary. Unit comes complete with 1 grit pan, instructions, guarantee and one pair of ¼", 3/8", 5/8" and 7/8" cups. MLS Part#: 263000 Price: $549.95**

LARGE SPHERE GRINDER by Covington

Dual 1/3 Hp., 115 VAC motors. Automatic grit application with slurry bowl. DIAMOND CUPS are Spring loaded cutting heads. available for this Cutting angle adjustment. machine, please contact Shielded arbor shafts and bearings. Large metal cabinet with shelf. us for information and Makes beautiful spheres 1 ¼" to 9" diameter. prices. Used silicon carbide cutting grit. The downward slanted cutter cups and shafts run the sphere in a bath of grit. This eliminates the need to constantly dab grit on with a brush, It also causes the grit slurry to run away from the bearings. The angle of the cutting cups can be increased as the rough corners of the sphere grinds off. Both heads are spring loaded, so continuous adjustment is unnecessary. Unit comes complete with above features, 2 polishing buffs, 2 grit pans, instructions, guarantee and one choice of one pair of cutter cups. Please state cup size when ordering. DIAMOND CUPS AVAILABLE AS AN ADDER. LARGE SPHERE MACHINE MLS Part#: 264000* Price: $1,650.00**

U-V LAMPS

VERSALUME by Raytech THE MOST VERSATILE & POWERFUL ULTRAVIOLET ON THE UVSL-26P by U.V. Products MARKET TODAY. NEW DESIGN ALLOWS USE WITH BATTERIES OFFERS BOTH STANDARD A/C & OR 115 A/C ADAPTER. Unit has both Longwave and Shortwave BATTERY OPERATION. FULL 12 WATT capabilities. Compact design runs off of 4 “AA” batteries or on OUTPUT. RECHARGEABLE internal provided 115 A/C adapter. Unit incorporates Raytech’s lifetime filters. sealed lead acid batteries eliminates 4 watt output. Lamp includes the book “The Story of Fluorescence”. replacements!!! Unit comes with both Longwave and Shortwave filters. One full charge of 24 hours gives 5 to 7 hours of battery operation. All models are equipped with built-in charger that plugs into standard 115 VAC. wall outlet. Lamp contains dual light tubes and can operate on one or two tubes. Single tube operation extends battery life. VERSALUME

MLS Part #: 730100 Price: $110.85 MLS Part #: 730200 Price: $421.00

MLS is an authorized distributor for AMERITOOL, BARRANCA, BELT Inc., COVINGTON, DIAMOND PACIFIC, ESTWING, FOREDOM, GRAVES, LAPCRAFT, LORTONE, MK DIAMOND PRODUCTS, RAYTECH, TRUE SQUARE METAL PRODUCTS and many more!!!

* - Item not normally stocked, special order item. 25 ** - Special shipping charge for item. FACETING EQUIPMENT “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com MARK IV FACETING MACHINE by Graves This is an EXCELLENT introductory unit. Designed specifically for the home or small shop, small, light-weight, easy to store and portable. An exact duplicate of the proven Mark I machine except for the motor, switch and cabinet. A high speed permanent magnet motor nestles inside a 17 ½" cabinet together with a continuous variable speed control of the motor. Faceting head and mast are investment cast aluminum/magnesium alloy that are machined and fitted to extremely close tolerances. All spindles and bar stock are precision-turned stainless steel for maximum durability and lasting beauty. The belt, pulleys and switch along with extra long 3- conductor cord are factory assembled and wired to produce a full power continuous variable speed range of 0 to 600 RPM! Just plug it in and it’s ready to run. The sturdy castings are assembled on a handsome 9 ½" X 17 ½" walnut mica cabinet for easy cleaning and lasting beauty. Angle indicator includes a 1/10 degree venire for accurate settings. Unit comes with:

Continuously Variable Motor (0 to 600 RPM), 115 VAC Aluminum/Magnesium Construction Accepts Full Sized (8") Laps Large See-thru Acrylic Drip Tank Bright 100 watt Flexible Lamp Accurate Readings to 1/10 Degree

MARK IV COMPLETE WITH STANDARD ACCESSORY PACKAGE MLS PART #: 210000 Price: $1,495.00 MARK IV FACETING MACHINE ONLY MLS PART #: 210100* Price: $1,225.00**

The COMPLETE ACCESSORY KIT for the GRAVES FACETING MACHINES Includes: 8" DIAMOND DISC. 360 grit diamond lap, nickel bonded for fast smooth roughing ULTRALAP. 3 - Five packs of Polishing Discs. Selection of three different compounds and preforming. charged on a flexible disc. Most popular and cleanest way to polish stones with a hardness less than 9. 8" DIAMOND DISC. 1200 mesh diamond lap, metal bonded in nickel for extra-fine cutting and prepolishing. DOPS. Beginning set of metal dops.

8" PLASTIC LAP. ¼" thick, flat acrylic polishing lap. Use as master lap or score for BOOK. “Fundamental Faceting”. use with compounds. To Purchase this PACKAGE separately: $338.35 BLACK STICK (DOP). A heat sensitive adhesive for temporarily bonding the gem to a dop. MLS PART #: 215010 Price: $304.50

MARK 5XL FACETING MACHINE by Graves NEW!!! DIGITAL INDICATING HEAD!!!! Latest technology. With this head replication of facet angles are assured. Mechanically an exact duplicate of the proven Mark I machine except for the motor, switch and cabinet. A high speed permanent magnet motor nestles inside a 17 ½" cabinet together with a continuous variable speed control of the motor. Faceting head and mast are investment cast aluminum/magnesium alloy that are machined and fitted to extremely close tolerances. All spindles and bar stock are precision-turned stainless steel for maximum durability and lasting beauty. The belt, pulleys and switch along with extra long 3-conductor cord are factory assembled and wired to produce a full power continuous variable speed range of 0 to 600 RPM! Just plug it in and it’s ready to run. The sturdy castings are assembled on a handsome 9 ½" X 17 ½" walnut mica cabinet for easy cleaning and lasting beauty. The unit comes in both a right hand and left hand mast configuration. (Right handed for right handed people. The unit also comes in a left hand version, which we do not stock but can special order from the factory.) Unit comes with: Continuously Variable Motor (0 to 600 RPM), 115 VAC Aluminum/Magnesium Construction Accepts Full Sized (8") Laps Large See-thru Acrylic Drip Tank Bright 100 watt Flexible Lamp Accurate Readings to 0.02 Degree Standard Dop Set Included

THE MARK 5XL DOES NOT COME WITH LAPS!!!!!! MARK 5XL RIGHT HAND MAST CONFIGURATION: MLS PART #: 214000 Price: $1,795.00

* - Item not normally stocked, special order item. 26 ** - Special shipping charge for item. FACETING EQUIPMENT “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

STANDARD DOP SET by PROFESSIONAL DOP SET by GRAVES GRAVES A preferred beginners dop set. This set This set of 30 dops contains one of includes 14 of the most common used each type/size of standard dops that dops and a table dop (used to cut the Graves makes. Made of brass and table on a gem). Made of brass and packaged in a sturdy wooden block for packaged in a sturdy wooden block for convenience and easy storage. Does convenience and easy storage. not contain the “TABLE” dop. MLS Part #: 212000 Price: $61.95 MLS Part #: 212100 Price: $106.95

MACHINE COVER INDEX PLATES for Graves Machines KEEP YOUR MACHINE CLEAN!! This crystal clear, rugged vinyl Graves makes 8 different index plates including 32, 40, 48, 64, 72, cover will fit any “machine” measuring 20"L X 18"H X 11"W. Will fit 80, 96 and 120 tooth. Each plate is machined aluminum. May fit Graves Mark I, IV and 5XL. facet machines other than Graves. Call us to order. MLS Part #: 212200 Price: $7.95 MLS Part #: 212300 Price: $27.95

MLS IS A STOCKING DISTRIBUTOR FOR GRAVES PRODUCTS. IF WE DO NOT HAVE IT IN STOCK WE CAN ORDER IT FROM GRAVES. WE ALSO CARRY A FULL LINE OF LAP PLATES AND DISCS, SEE PAGES 38 and 39 OF THIS CATALOG.

FACETRON by Jarvi Tool Co.

A Lapidary Luxury is how most faceter’s describe the Facetron because of it’s ease of operation, superior quality and precision that makes it a joy to create beautiful gemstones. Some of the features of the Facetron include:

Dial Indicator stop system. Micro-height adjustment. Two quart water coolant system. Powerful permanent magnet motor, variable speed, 115 VAC. Machine used standard 8" diameter, ½" arbor hole discs. Dop chuck with exclusive cam lock system. Digital protractor provides 1/10 of a degree angle settings. Master anchor lever. Precision index wheel. Electronic speed control.

GRINDING and POLISH DISCS FOR THIS MACHINE AVAILABLE ON PAGES 38 & 39!!

Complete Facetron Kit includes all you need to begin making fine gemstones except laps:

The Facetron Owners Manual. ACCESSORIES AVAILABLE FOR THIS Faceting Instruction Book. A set of 15 dops. MACHINE, PLEASE CONTACT US FOR A Water system. LIST AND PRICES. The complete Facetron machine. Your choice of any index gear (96 - All Purpose recommended as first index gear). Acculign Transfer Stand for unequaled precision and ease of use. Locating bar holds keyed dops for perfect stone transfers. LIFETIME WARRANTY against defects in materials or workmanship.

MLS PART #: 213000* Price: $3,195.00**

* - Item not normally stocked, special order item. ** - Special shipping charge for item. 27 SAW BLADES “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com ABOUT DIAMOND SAW BLADES IN GENERAL MLS HAS OVER 400 DIAMOND SAW BLADES IN STOCK. WE STOCK 3 BASIC TYPE OF BLADES, THESE TYPES ARE:

1. NICKEL BONDED RIM DIAMOND BLADES. 2. NOTCHED RIM BLADES. 3. CONTINUOUS SINTERED RIM BLADE.

NICKEL BONDED RIM DIAMOND BLADES - Stocked in sizes from 4" to 10" diameter. Made in thinner thicknesses available in ½" and 5/8" arbors. Made by bonding the maximum concentration of diamonds to the edge or rim of the blade core. Used for trim saws to preform slabs. For very rapid cutting with minimum loss of material. Can usually be used with both water based and oil based lubricants. These type blades usually have a stainless steel core.

NOTCHED RIM BLADES - The old standby in diamond blades for the lapidary industry. Stocked in sizes from 6" to 24" diameters (available up to 36" diameter) in many different thicknesses and arbor diameters. This blade can be used in both trim sawing and slabbing operations. Made by filling hundreds of “notches” cut into the rim of the a blade with a metal/diamond compound. This compound is “melted” into the notches to hold it into place. These blades must usually be run in an oil based lubricant. CAUTION: Notched rim blades should be sharpened after every 4th or 5th cut!!!

CONTINUOUS SINTERED RIM BLADES - Perhaps the best technology blade on the market today. Stocked in sizes from 4" to 24" diameters (available up to 36" diameter) in many different blade thicknesses and arbor diameters. These blades can be used for both trim and slabbing operations. These blades are made by bonding (sintering) a very thick layer or rim of a specially formulated bronze/brass/diamond mixture to a steel core. This means as the outer edge of the blade wares away a new fresh layer of diamonds is exposed. Smaller diameter sintered blades (10" diameter and under) can be run in water based lubricants if the saw body is designed for water. They work exceptionally well when used with oil based lubricants. Blades of this style larger than 14" diameter are segmented due to differential thermal expansion between the core and edge.

LAPCRAFT’s DIA-LASER DIAMOND SAW BLADES: These plated diamond circular saw blades are essential when cutting precious materials. They are available in ultra-thin thicknesses which slice with minimal material loss. These blades unique “cutting teeth” are premium, multi pointed diamond crystals chosen for their strength and sharpness. These cutting points are securely nickel plated onto rust proof, circular full-hard stainless steel bodies.

J.B.F.C.’s PRO-SLICER: The Pro-Slicer blade is a new concept in plated rim blades. Pro-Slicers are crafted by an entirely new process, from space age technology. The cutting edge is literally paved with diamonds. Thousands of diamonds are TIGHTLY PACKED onto the edge. Each and every diamonds is locked in a working position, 100% of the time, from the first slice to the last, allowing you to cut much faster and easier, This is no SHORT LIFE hobby blade.

BLADE DIAMETER X LAPCRAFT DIA- LASER J.B.F.C. PRO-SLICER CORE THICKNESS ARBOR KERF ARBOR KERF MLS PART No. MLS PART No. DIAMETER THICKNESS Price DIAMETER THICKNESS Price 4" X .004" 1/2" .010" 600010 $30.00 1/2" .007" 670010 $22.50 4" X .004" 5/8" .010" 600020 $30.00 5/8" .007" 670020 $22.50 4" X .012" 1/2" .024" 600030 $30.00 1/2" .016" 670030 $27.50 4" X .012" 5/8" .024" 600040 $30.00 5/8" .016" 670040 $27.50 5" X .004" 1/2" .010" 600050 $35.00 N/A N/A N/A N/A 5" X .004" 5/8" .010" 600060 $35.00 N/A N/A N/A N/A 5" X .012" 1/2" .024" 600070 $35.00 N/A N/A N/A N/A 5" X .012" 5/8" .024" 600080 $35.00 N/A N/A N/A N/A 6" X .006" 1/2" .014" 600090 $40.00 1/2" .009" 670070 $27.70 6" X .006" 5/8" .014" 600100 $40.00 5/8" .009" 670080 $27.70 6" X .012" 1/2" .024" 600110 $40.00 1/2" .016" 670090 $27.70 6" X .012" 5/8" .024" 600120 $40.00 5/8" .016" 670100 $27.70 6" X .024" 5/8" - 1/2" .045" 600130 $45.00 5/8" - 1/2" .032" 670110 $31.15 8" X .012" 5/8" - 1/2" .024" 600140 $55.00 5/8" - 1/2" .016" 670120 $39.75 8" X .025" 5/8" - 1/2" .045" 600150 $60.00 5/8" - 1/2" .032" 670130 $39.75 10" X .015" N/A N/A N/A N/A 5/8" - 1/2" .019" 670140 $55.30 10" X .032" N/A N/A N/A N/A 5/8" - 1/2" .040" 670150 $55.30

28 N/A - Not Available SAW BLADES “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com The MLS SILVER LANCER notched rim diamond saw blade use premium diamonds The MLS GREEN LANCER is a commercial grade notched rim diamond blade. It can in its construction. They cut great at a low price. Recommended for turquoise, opal, aqua, be used for general purpose work on both trim or slab saws. Recommended for agates, jades, tourmaline, garnet, corundum or where yield is a concern. geodes or industrial lapidary cutting. MLS SILVER LANCER BLADE MLS GREEN LANCER BLADE DIAMETER X NOTCHED RIM DIAMOND SAW BLADES DIAMETER X CRINKLED RIM DIAMOND SAW BLADES CORE THICKNESS ARBOR KERF MLS PART CORE ARBOR KERF MLS PART DIAMETER THICKNESS No. Price THICKNESS DIAMETER THICKNESS No. Price 4" X .006" 5/8" - 1/2" .009" 610010 $4.00 6" X .025" 5/8" - 1/2" .031" 610080 $16.00 4" X .010" 5/8" - 1/2" .013" 610020 $4.00 8" X .025" 5/8" - 1/2" .031" 610090 $20.00 5" X .006" 5/8" - 1/2" .009" 610030 $5.00 10" X .031" 5/8" - 1/2" .044" 610100 $34.00 5" X .010" 5/8" - 1/2" .013" 610040 $5.00 12" X .040" 1" - 5/8" .052" 610110 $50.00 6" X .006" 5/8" - 1/2" .009" 610050 $6.00 14" X .051" 1" - 5/8" .067" 610120 $80.00 6" X .010" 5/8" - 1/2" .012" 610060 $6.00 16" X .059" 1" - ¾" .088" 610130 $120.00 6" X .012" 5/8" - 1/2" .015" 610070 $6.00 18" X .059" 1" - ¾" .088" 610140 $150.00 20" X .071" 1" - ¾" .098" 610150* $180.00 BLADE ARBOR HOLE REDUCING BUSHINGS 24" X .071" 1" - ¾" .098" 610160* $260.00 30" X .071" 1" - ¾" .098" 610170* $550.00** REDUCTION BUSHING REC. BLADE MLS PART Price SIZE THICKNESS THICKNESS No. 36" X .071" 1" - ¾" .098" 610180* $800.00** 5/8" - 1/2" 0.014" 0.014 620010 $3.00 BLADE TYPE SELECTION 5/8" - 1/2" 0.020" .020" to .029" 620020 $3.00 FOR ROCKS WITH LESS THAN 20% METAL CONTENT CHOOSE A 5/8" - 1/2" 0.030" .030" to .049" 620030 $3.00 DIAMOND BLADE. 5/8" - 1/2" 0.050" .050" to + 620040 $3.00 FOR METAL WITH LESS THAN 20% ROCK CONTENT CHOOSE A CBN PLATED BLADE!! 3/4" - 5/8" 0.032 .030" to + 620050 $4.00 IN BETWEEN – “GOOD LUCK”!!!! 1" - 5/8" 0.050" .050" to .069" 620080 $5.00 1" – 5/8" 0.070" .070" to + 620090 $5.00 WE ALSO HANDLE A LINE OF CBN RIM 1" - 3/4" 0.050" .050" to .075" 620100 $5.75 PLATED BLADES FOR METEORITES. CALL US FOR PRICES AND AVAILABILITY. 1" - 3/4" 0.075" .076" to + 620110 $5.75 MK’S MK-297 CRITERION DIAMOND SAW BLADES: These notched rim diamond circular saw blades were the benchmark of the lapidary industry. The MK-297 diamond blades contains 30% more diamond concentration, the result of compressing the rim to exacting standards and adding 20% more synthetic man-made diamonds. The thickness of the 1010 cold rolled steel core remains the same and is both hand and machined tensioned for precision, accurate cutting. These blades were made in the good old U.S.A.!!!! They are no longer made. When our inventory is depleted, that’s the end of them.

MK’S MK-301 GEM KING DIAMOND SAW BLADES: These notched rim are MK’s premium line of this style blade. A superior lapidary saw blade with the highest concentration of a special type and grade of man-made diamonds, in a new formulation that cuts hard materials such as agates and petrified wood with unprecedented speed. These blades are now made in Korea!!!!

BLADE DIAMETER X MK DIAMOND MK-297 CRITERION MK DIAMOND MK-301 GEMKING CORE THICKNESS ARBOR ARBOR MLS PART No. MLS PART No. DIAMETER Price DIAMETER Price 6" X .025" N/A N/A N/A 5/8" - 1/2" 650010 $81.00 6" X .040" 5/8" - 1/2" 640030 $52.00 5/8" - 1/2" 650030 $90.00 8" X .032" 5/8" - 1/2" 640050 $54.00 5/8" - 1/2" 650050 $101.00 8" X .040" 5/8" - 1/2" 640060 $60.00 5/8" - 1/2" 650060 $111.00 8" X .050" 5/8" - 1/2" 640070 $64.00 N/A N/A N/A 9" X .040" 5/8" - 1/2" 640080 $80.00 N/A N/A N/A 9" X .050" 5/8" - 1/2" 640090 $85.00 N/A N/A N/A 10" X .025" N/A N/A N/A 5/8" - 1/2" 650100 $121.00 10" X .032" N/A N/A N/A 5/8" - 1/2" 650110 $132.00 10" X .040" 5/8" - 1/2" 640120 $95.00 (Felker) 5/8" - 1/2" 650120 $134.00 10" X .050" N/A N/A N/A N/A N/A N/A

* - Item not normally stocked, special order item. N/A - Not Available **- Special shipping charges for item. 29 SAW BLADES “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com The MK or BD-303 BLADE DIAMETER X MK DIAMOND MK-297 CRITERION MK DIAMOND MK-301 GEMKING PROFESSIONAL CORE THICKNESS ARBOR ARBOR is currently the state of MLS PART No. Price MLS PART No. Price DIAMETER DIAMETER the art technology in 10" X .064" 5/8" - 1/2" 640140 $120.00 N/A N/A N/A diamond saw blades. The 303 is a sintered 12" X .032" N/A N/A N/A 1" - 5/8" 650150 $184.00 rim blade with very high 12" X .040" N/A N/A N/A N/A N/A N/A diamond content. The PROFESSIONAL is 12" X .050" 3/4 - 5/8" 640170 $172.00 N/A N/A N/A today’s producer of 12" X .065" N/A N/A N/A 1" - 5/8" 650180 $210.00 smooth cuts and are 14" X .064" N/A N/A N/A 1" – 5/8" 650210 $312.00 used for cutting rare and valuable materials 14" X .075" N/A N/A N/A N/A N/A N/A when waste must be 16" X .060" 1" - 3/4" 640230 $253.00 1" - 3/4" 650230 $350.00 held to a minimum and speed of cut is 16" X .075" 1" - 3/4" 640250 $308.00 1" - 3/4" 650250 $402.00 essential. This blade 18" X .085" N/A N/A N/A 1" - 3/4" 650270 $478.00 lasts longer and will cut 20" X .064" N/A N/A N/A 1" - 3/4" 650280 $474.00 faster than ordinary notched rim or plated 20" X .075" 1" - 3/4" 640290 $343.00 1" - 3/4" 650290 $525.00 diamond blades. They can be used at maximum arbor speeds. I USE THESE BLADES MYSELF, THEY ARE THE FINEST BLADE I HAVE EVER USED!!!! PLEASE NOTE: BD, Barranca Diamond is a wholly owned subsidiary of MK/BD-303 PROFESSIONAL BLADE DIAMETER X MK Diamond. They are the exact same blade except for the label. KERF THICKNESS ARBOR MLS PART No. Price DIAMETER MK/BD 303P SINTERED RIM BLADE 4" X .014" 1/2" 660010 $46.00 For extremely dense hard rock (e.g – Brazilian Agate, Bloodstone) try 4" X .014" 5/8" 660020 $46.00 this blade. High-grade diamond crystal matrix sintered to high-carbon steel core. The sintered matrix of this blade is “slightly” softer that the 4" X .020" 5/8" - 1/2" 660030 $48.00 standard MK/BD 303. This gives better performance when cutting 5" X .020" 5/8" - 1/2" 660040 $50.00 harder denser material. The matrix wears away faster exposing fresh 6" X .014" 1/2" 660050 $53.00 diamonds at a faster rate. This blade should be used ONLY with OIL lubricants. 6" X .014" 5/8" 660060 $53.00 6" X .020" 5/8" - 1/2" 660070 $55.00 BLADE DIAMETER X MK/BD-303P PROFESSIONAL KERF THICKNESS ARBOR 6" X .032" 5/8" - 1/2" MLS PART No. 660080 $58.00 DIAMETER Price 6" X .040" 5/8" - 1/2" 660090 $62.00 7" X .067" 5/8" - 1/2" 680010 $91.00 7" X .030" 5/8" - 1/2" 660095 $72.00 8" X .067" 5/8" - 1/2" 680020 $102.00 7" X .050" 5/8" - 1/2" 660100 $72.00 10" X .067" 1" – 5/8" 680040 $115.00 8" X .025" 5/8" - 1/2" 660110 $69.00 12" X .095" 1" – 5/8" 680050 $141.00 8" X .032" 5/8" - 1/2" 660120 $72.00 14" X .095" 1" – 5/8" 680060 $178.00 8" X .060" 5/8" - 1/2" 660130 $74.00 9" X .060" 5/8" - 1/2" 660140 $75.00 MK/BD 305 AGATE KUTTER BLADE For extremely dense hard rock (e.g – Brazilian Agate, Bloodstone) 10" X .032" 5/8" - 1/2" 660150 $78.00 designed for use with WATER coolant!!! Continuous rim sintered blade 10" X .040" 5/8" - 1/2" 660160 $81.00 with laser cut notches for both better cooling and heat stress relief. 10" X .050" 5/8" - 1/2" 660170 $106.00 MK/BD-303P PROFESSIONAL 12" X .065" 1" – 5/8" 660180 $224.00 BLADE DIAMETER X KERF THICKNESS ARBOR MLS PART No. 14" X .070" 1" – 5/8" 660190 $248.00 DIAMETER Price 16" X .085" 1" - 3/4" 660200 $294.00 5" X .050" 5/8" - 1/2" 690010 $79.00 18" X .085" 1" - 3/4" 660210 $356.00 6" X .050" 5/8" - 1/2" 690020 $89.00 20" X .100" 1" - 3/4" 660220 $459.00 7" X .050" 5/8" - 1/2" 690030 $96.00 24" X .100" 1" - 3/4" 660230 $776.00 8" X .050" 5/8" - 1/2" 690040 $115.00 30" X .125" 1" - 3/4" 660240* $1,199.00 10" X .050" 5/8" - 1/2" 690050 $134.00 36" X .200" 1" - 3/4" 660250* $1,741.00 12" X .080" 1" – 5/8" 690060 $236.00 14" X .080" 1" – 5/8" 690070 $296.00 * - Item not normally stocked, special order item. ** - Special shipping charge for item. 30 N/A - Not Available LUBRICANTS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

MLS PART DIAMOND LUBE by MLS, is a water soluble oil EQUIPMENT DESCRIPTION PRICE NUMBER for diamond saw blades, wheels and drill bits. Use on saw blades 10" in dia. or under. One pint makes 5 DIAMOND LUBE by MLS, 1 pint, (16 gallons. 780100 Oz.) add to water, makes 5 gallons. $12.00 DIAMOND LUBE by MLS, 1 quart, (32 Oz.) add to water, makes 10 SLICK-CUT by MLS, this is a special blend of 780110 $21.60 oils to produce a very high quality mineral oil based gallons. cutting oil. Water clear with almost NO SMELL. We 780300 SLICK-CUT by MLS, 1 gallon $24.00** developed and tested this in house. 780310 SLICK-CUT by MLS, 5 gallons $108.00** TOOL COOL, by Lapcraft, 8 oz. TOOL COOL by Lapcraft, is a water soluble wax 780400 concentrate $7.50 for diamond saw blades, wheels, drill bits and tools. TOOL COOL, by Lapcraft, 32 oz. (1 Use on saw blades 10" or under in diameter. Mix 8 oz. Of Tool Cool to 1 gallon water. Easy on the skin. 780410 quart), concentrate $27.00 TOOL COOL, by Lapcraft, 128 oz. ( 1 780420 gal.), concentrate $45.00** WATER AID by Diamond Pacific, is a concentrated wetting agent. It increases cutting action of sawing, WATER AID, by Diamond Pacific, 8 grinding and sanding/polishing. It’s biodegradable and 780500 $3.25 normally harmless to the skin. Approx. 6 drops per pint oz. concentrate is all that’s needed. WATER AID, by Diamond Pacific, 780510 16 oz. (1 pint), concentrate $5.25 OIL MIST ELIMINATOR by Lortone, To be WATER AID, by Diamond Pacific, 780520 $28.75** added ONLY to PETROLEUM BASED OILS or 128 oz. (1 gallon), concentrate MINERAL OIL. Long chain polymer hydrocarbon reduces blade friction and oil fogging. One 16 oz. OIL MIST ELIMINATOR, by Lortone, Container treats 5 gallons oil! 780600 16 oz. (1 pint), concentrate $11.50

MLS PART EQUIPMENT DESCRIPTION PRICE NUMBER DRESSING STICK - SMALL, 11/16" 621000 X 11/16" X 4", Package of 3, use on $19.50 8" diameter blades and smaller. DRESSING STICK - MEDIUM, 1" X DRESSING STICKS 621010 1" X 6", use on 10" through 14" $11.50 MLS DRESSING STICKS are manufactured from pure virgin diameter. ALUMINUM OXIDE!! You should only used aluminum oxide to DRESSING STICK - LARGE, 2" X 2" “sharpen” diamond saw blades. Any other material can damage the 621020 X 6", use on blades 16" diameter and $24.90 blade. You can also use these sticks to “sharpen” sintered diamond larger. wheels.

GRINDING WHEELS

MLS SILICON CARBIDE Grinding wheels continually present new, sharp faces ideal for stone grinding. The silicon carbide used in our wheels is hand sorted 100% to National Bureau of Standards screen sizes. Every wheel is diamond dressed, precision balanced and sonically tested.

BLACK SILICON CARBIDE GRINDING WHEELS are the standard of the industry. Manufactured to GREEN - SILICON CARBIDE give the optimum of fast cutting and wheel life. This wheel sets the standard for lapidary grinders GRINDING WHEELS everywhere and can be used on all types of stones.

BLACK - SILICON CARBIDE GRINDING WHEELS GREEN SILICON CARBIDE GRINDING WHEELS are designed for the lapidarist who desires extra fast cutting. They are premium quality, softer bonded wheels that will not glaze even at the highest speeds.

** - Special Shipping Charges for this Item. 31 GRINDING WHEELS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

BLACK SILICON GREEN SILICON WHEEL DIAMETER X Silicon THICKNESS X ARBOR Carbide CARBIDE WHEELS CARBIDE WHEELS HOLE Mesh MLS PART No. Price MLS PART No. Price 6" X 1" X 1" 100 430010 $24.65 431010 $29.10 T-BAR DIAMOND DRESSER 6" X 1" X 1" 220 430020 $28.35 431020 $32.80 8" X 1" X 1" 100 430030 $50.00 431030 $45.00 All silicon carbide grinding wheels form grooves even with normal use. The T- 8" X 1" X 1" 220 430040 $52.00 431040 $49.00 Bar Diamond Dresser is essential for 8" X 1 1/2" X 1" 100 430050 $44.45 431050 $52.40 restoring a flat working surface and a true smooth running balanced wheel. 8" X 1 1/2" X 1" 220 430060 $51.05 431060 $59.00 DRESSER COMPLETE 10" X 1 " X 1" 100 430070 $80.00 N/A N/A MLS PART#: 510030 10" X 1 1/2" X 1" 100 N/A N/A 431080 $94.90 PRICE: $30.00 10" X 1 1/2" X 1" 220 430090 $91.00 431090 $104.70 REPLACEMENT HEAD 12" X 1 1/2" X 1" 220 430100 $150.00 N/A N/A MLS PART#: 510040 12" X 1 1/2" X 1 1/4" 220 N/A N/A 431110 $190.00 PRICE: $24.00

DIAMOND PACIFIC MLS LANCER WHEEL DIAMETER X GALAXY DIAMOND Diamond DIAMOND WHEELS THICKNESS X ARBOR Mesh WHEELS HOLE Size MLS PART No. Price MLS PART No. Price 4" X 1 1/4" X 1" 80 500010 $100.00 501010 $150.00 4" X 1 1/4" X 1" 100 500020 $100.00 501020 $140.00 DIAMOND GRINDING WHEELS 4" X 1 1/4" X 1" 220 500030 $100.00 501030 $110.00 6" X 1 1/2" X 1" 60 500040 $150.00 501040 $215.00 These DIAMOND GRINDING WHEELS, 6" X 1 1/2" X 1" 80 also known as plated rim diamond 500050 $140.00 501050 $200.00 wheels, are made by nickel plating/ 6" X 1 1/2" X 1" 100 500060 $130.00 501060 $185.00 bonding a layer of diamonds to the 6" X 1 1/2 " X 1" 180 500070 $126.00 501070 $155.00 perimeters of the wheel. The diamonds are securely held into place. 6" X 1 1/2" X 1" 220 500080 $126.00 501080 $140.00 6" X 1 1/2" X 1" 360 500090 $120.00 501090 $140.00 The MLS LANCER wheels are 6" X 1 1/2" X 1" 600 constructed of solid metal cores. These 500100 $110.00 501100 $140.00 wheels actually sing to you while you are 8" X 1 1/2" X 1" 60 500110 $200.00 501110 $280.00 grinding. 8" X 1 1/2" X 1" 80 500120 $184.00 501120 $260.00 The Diamond Pacific GALAXY wheels 8" X 1 1/2 " X 1" 100 500130 $170.00 501130 $240.00 are made with tough nylon cores, banded 8" X 1 1/2" X 1" 180 500140 $166.00 501140 $200.00 with solid steel rings, balanced and 8" X 1 1/2" X 1" 220 machined to close tolerances which 500150 $166.00 501150 $180.00 provide fast accurate grinding. 8" X 1 1/2" X 1" 360 500160 $160.00 501160 $180.00 8" X 1 1/2" X 1" 600 500170 $150.00 501170 $180.00

MLS PART EQUIPMENT DESCRIPTION PRICE NUMBER TELESCOPIC BUSHINGS, Reduce 070010 from 1" diameter hole 3/4", 5/8" or 1/2", $2.00 15/16" wide Remember TELESCOPIC BUSHINGS, Reduce 070020 from 1" diameter hole 3/4", 5/8" or 1/2", $1.80 11/16" wide ROCKS ARE GOOD!!!!! TELESCOPIC BUSHINGS, Reduce 070030 from 1" diameter hole 3/4", 5/8" or 1/2", $1.70 1/2" wide

N/A - Not Available 32 GRINDING WHEELS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com DIAMOND PACIFIC REENTEL RESIN EASTWIND FLEX WHEEL DIAMETER X Diamond NOVA DIAMOND DIAMOND WHEELS DIAMOND WHEELS THICKNESS X ARBOR Mesh WHEELS HOLE Size MLS PART No. Price MLS PART No. Price MLS PART No. Price 4" X 1 1/4" X 1" 280 N/A N/A N/A N/A 504010 $87.00 4" X 1 1/4" X 1" 600 N/A N/A N/A N/A 504020 $87.00 4" X 1 1/4" X 1" 1,200 N/A N/A N/A N/A 504030 $87.00 4" X 1 1/4" X 1" 3,000 N/A N/A N/A N/A 504040 $87.00 4" X 1 1/4" X 1" 8,000 N/A N/A N/A N/A 504050 $87.00 4" X 1 1/4" X 1" 14,000 N/A N/A N/A N/A 504060 $87.00 4" X 1 1/4" X 1" 50,000 N/A N/A N/A N/A 504070 $87.00 6" X 1 1/2" X 1" 280 505080 $70.00 503080 $128.10 504080 $130.00 6" X 1 1/2" X 1" 600 505090 $70.00 503090 $116.85 504090 $130.00 6" X 1 1/2" X 1" 1,200 505100 $70.00 503100 $116.85 504100 $130.00 6" X 1 1/2" X 1" 3,000 505110 $70.00 503110 $116.85 504110 $130.00 6" X 1 1/2" X 1" 8,000 505120 $70.00 503120 $116.85 504120 $130.00 6" X 1 1/2" X 1" 14,000 505130 $70.00 503130 $116.85 504130 $130.00 6" X 1 1/2" X 1" 50,000 N/A N/A 503140 $116.85 504140 $130.00 8" X 2" X 1" 280 505150 $100.00 503150 $179.80 504150 $215.00 8" X 2" X 1" 600 505160 $100.00 503160 $163.85 504160 $215.00 8" X 2" X 1" 1,200 505170 $100.00 503170 $163.85 504170 $215.00 8" X 2" X 1" 3,000 505180 $100.00 503180 $163.85 504180 $215.00 8" X 2" X 1" 8,000 505190 $100.00 503190 $163.85 504190 $215.00 8" X 2" X 1" 14,000 505200 $100.00 503200 $163.85 504200 $215.00 8" X 2" X 1" 50,000 N/A N/A 503210 $163.85 504210 $215.00

N/A - Not Available SINTERED RIM DIAMOND WHEELS WHEEL DIAMETER X Diamond MLS PART THICKNESS X ARBOR Price Mesh Size No. HOLE 4" X 1 1/2" X 1" 30 502000* $305.40 DIAMOND SANDING / POLISH WHEELS 4" X 1 1/2" X 1" 60/80 502010* $257.15 These DIAMOND SANDING / The EASTWIND FLEX 4" X 1 1/2" X 1" 100/120 502020* $257.15 WHEELS are constructed of POLISHING WHEELS, also 4" X 1 1/2" X 1" 220 502030* $257.15 known as diamond soft wheels, nylon cores and use an unique are made by bonding a layer of resin system to bond the 6" X 1 1/2" X 1" 30 502100* $400.00 diamonds and resin to the diamonds to the wheel. These 6" X 1 1/2" X 1" 60/80 502110* $360.00 perimeters of a foam backed wheels produce a less 6" X 1 1/2" X 1" 100/120 wheel on a nylon core. The aggressive sanding action than 502120* $360.00 diamonds are securely held in some flex wheels on the market. 6" X 1 1/2" X 1" 220 502130* $360.00 A favorite with OPAL cutters. place for many hours of sanding 8" X 1 1/2" X 1" 30 502200* $490.00 and polishing. These wheels need to be broken in! Made in the U.S.A. 8" X 1 1/2" X 1" 60/80 502210* $450.00 The Reentel RESIN 8" X 1 1/2" X 1" 100/120 502220* $450.00 DIAMOND WHEELS are The Diamond Pacific NOVA 8" X 1 1/2" X 1" 220 constructed of nylon cores. An wheels are the “GOLD” standard 502230* $450.00 economical priced diamond flex of flex wheels in the industry. wheel for the occasional They are the longest lasting flex SINTERED DIAMOND WHEEL lapidarist. These wheels need to wheel made. These wheels The BEST Diamond Grinding Wheel on the be broken in! Made in the U.S.A. need break-in. Made in the MARKET!!! Constructed of a solid metal core with a These are the identical wheels U.S.A. These are the identical 3.5 mm layer of DIAMOND/METAL Matrix around the used on the Cabking. wheels used on the Pixie, Genie perimeter of the wheel. With proper care this wheel and Titan. will cut as fast for its’ entire life as when it is fresh out * - Special Order Item of the box. This style wheel has a MUCH extended 33 life (better than 20 times) of a rim plated wheel. SANDING / POLISHING BELTS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com SILICON CARBIDE BELTS BELT SIZE 36 Mesh 60 Mesh 80 Mesh WIDTH X APPLICATION CIRCUMFERENCE MLS PART No. Price MLS PART No. Price MLS PART No. Price

2 1/2" X 18 15/16" 6" X 2 ½" Scott- Murray or Lortone EX Drums 332010 $2.65 332020 $2.30 332030 $2.15 3" X 24" Covington Belt Sander & Other Misc. Sanders 333010 Call 333020 Call 333030 Call 3" X 25 7/32" 8" X 3" Scott-Murray Expandable Drums 334010 $3.65 334020 $3.20 334030 $3.00 3" X 25 1/8" 8" X 3" Lortone Exact-Span Rubber Drums 335010 $3.65 335020 $3.20 335030 $3.00 3" X 41 1/2" Highland Park Belt Sander 336010 $6.15 336020 $5.60 336030 Call 4" X 37 15/16" 12" X 4" Bull wheel 337010 Call 337020 $7.10 337030 $6.55

BELT SIZE 100 Mesh 220 Mesh 320 Mesh 400 Mesh 600 Mesh 800 Mesh WIDTH X APPLICATION Price CIRCUMFERENCE MLS Part # MLS Part # MLS Part # MLS Part # MLS Part # MLS Part #

1 1/2" X 18 15/16" 6" X 1 ½" Scott- Murray or Lortone EX Drums $1.65 331040 331050 331060 331070 331080 331090 2 1/2" X 18 15/16" 6" X 2 ½" Scott- Murray or Lortone EX Drums $2.20 332040 332050 332060 332070 332080 332090 3" X 24" Covington Belt Sander & Other Misc. Sanders $2.20 Call Call Call 333070 333080 Call 3" X 25 7/32" 8" X 3" Scott-Murray Expandable Drums $2.85 334040 334050 334060 334070 334080 334090 3" X 25 1/8" 8" X 3" Lortone Exact-Span Rubber Drums $2.85 335040 335050 335060 335070 335080 335090 3" X 41 1/2" Highland Park Belt Sander $5.05 336040 336050 336060 336070 336080 Call 4" X 37 15/16" 12" X 4" Bull wheel $6.35 337040 337050 337060 337070 337080 337090 3" X 30" Gryphon Wet Belt Sander $3.45 340040 340050 Call 340070 Call 340090

MLS SILICON CARBIDE 100 Mesh 220 Mesh 320 Mesh 400 Mesh 600 Mesh 800 Mesh Price SANDING CLOTH ROLLS MLS Part # MLS Part # MLS Part # MLS Part # MLS Part # MLS Part # 3" Wide X 25' Long $24.90 321010 321020 321030 321040 321050 321060 3" Wide X 50' Long $49.85 322010 322020 322030 322040 322050 322060 3" Wide X 150' Long $135.90 323010 323020 323030 323040 323050 323060

Diamond belts last many times longer than silicon carbide belts. (Sometimes up to 50 or more times longer.) There is also much less mess with diamond THIS PRODUCT belts. Diamond belts also cut much faster than silicon carbide belts. Also AVAILABLE MID please note that the finish is different on the 2 different type belts. As a rule of thumb a 600 Mesh Silicon Carbide belt produces the same finish TO LATE 2016 as a 1,800 Mesh Diamond Belt.

HI-TECH DIAMOND BELTS NEW DIAMOND FLEX WHEEL / 1 1/2" Wide X 18 15/16" 2 1/2" Wide X 18 15/16" 3" Wide X 25 7/32" DIAMOND BELT BREAK IN STICK Circumference Circumference Circumference Flexible resin bonded diamond DIAMOND 6" X 1/2" Expandable or Lortone EX 6" X 2 1/2" Expandable Lortone EX wheels and diamond belts need 8" X 3" Expandable Drum MESH SIZE Drums Drums broken in to operate correctly. Basically you need to burn the resin MLS PART No. Price MLS PART No. Price MLS PART No. Price off of the diamond faces. This special 220 370010 $35.00 370110 $50.00 370210 $75.00 pure aluminum oxide stick is made just for that application. 325 370020 $35.00 370120 $50.00 370220 $75.00 600 370030 $35.00 370130 $50.00 370230 $75.00 To use, just pass over the face of the 1,200 370040 $35.00 370140 $50.00 370240 $75.00 wheel/belt for 20 to 30 seconds. USE LOTS OF WATER!!! 3,000 370050 $35.00 370150 $50.00 370250 $75.00 BREAK-IN STICK 8,000 370060 $35.00 370160 $50.00 370260 $75.00 MLS PART#: 622010 14,000 370070 $35.00 370170 $50.00 370270 $75.00 PRICE: $7.00 34 SANDING / POLISHING BELTS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com EASTWIND DIAMOND BELTS 1 1/2" Wide X 18 15/16" 2 1/2" Wide X 18 15/16" 3" Wide X 25 7/32" EASTWIND Diamond Belts Circumference Circumference Circumference are a favorite with Opal DIAMOND 6" X 1/2" Scott-Murray Expandable or 6" X 2 1/2" Scott-Murray Expandable 8" X 3" Scott-Murray cutters. They provide a “less” MESH SIZE Lortone EX Drums Lortone EX Drums Expandable Drum aggressive action that a Nova MLS PART No. Price MLS PART No. Price MLS PART No. Price wheel. They will provide a 60 301010 $47.70 302010 $68.00 304010 $102.00 superior polish for this class of 120 301020 $43.40 302020 $62.00 304020 $93.00 resin bonded diamond abrasive. 220 301030 $43.40 302030 $62.00 304030 $93.00 325 301040 $43.40 302040 $62.00 304040 $93.00 400 301050 $43.40 302050 $62.00 304050 $93.00 600 301060 $43.40 302060 $62.00 304060 $93.00 WE LIKE 1,200 301070 $43.40 302070 $62.00 304070 $93.00 1,800 301080 $43.40 302080 $62.00 304080 $93.00 ROCKS, 3,000 301090 $43.40 302090 $62.00 304090 $93.00 8,000 301100 $43.40 302100 $62.00 304100 $93.00 ROCKS ARE 14,000 301110 $43.40 302110 $62.00 304110 $93.00 GOOD!!! 50,000 301120 $43.40 302120 $62.00 304120 $93.00 100,000 301130 $43.40 302130 $62.00 304130 $93.00

POLISHING BELTS POLISHING BELTS MLS PART MLS PART PRICE PRICE NUMBER PARTS DESCRIPTION NUMBER PARTS DESCRIPTION UNCHARGED CANVAS BELTS For RESIN BONDED CERIUM OXIDE use on Expandable Drum, Belts are POLISH BELT For use on Expandable 310010 1 1/2" X 18 15/16" Belts (1 1/2" X 6" $2.00 380020 Drum, Belts are 2 1/2" X 18 15/16" Belts $53.00 Drums) (2 1/2" X 6" Drums) UNCHARGED CANVAS BELTS For RESIN BONDED CERIUM OXIDE use on Expandable Drum, Belts are POLISH BELT For use on Expandable 310020 2 1/2" X 18 15/16" Belts (2 1/2" X 6" $3.00 380030 Drum, Belts are 3" X 25 7/32" Belts (3" X $63.60 Drums) 8" Drums) UNCHARGED CANVAS BELTS For 310030 use on Expandable Drum, Belts are $4.00 POLISHING DRUMS 3" X 25 7/32" Belts (3" X 8" Scott- MLS PART PRICE Murray type drums) NUMBER PARTS DESCRIPTION UNCHARGED CORK BELTS For use 6" X 1 1/2" Wide SCOTT-MURRAY or 315010 on Expandable Drum, Belts are $5.00 341005 Equal Expandable Drum, Uses 1 ½" X $65.00 1 1/2" X 18 15/16" Belts (1 1/2" X 6" 18 15/16" Belts. Fits 1" to ½" Arbor Size Drums) 6" X 2 1/2" Wide SCOTT-MURRAY or UNCHARGED CORK BELTS For use 341010 Equal Expandable Drum, Uses 2 ½" X $75.00 315020 on Expandable Drum, Belts are $5.80 18 15/16" Belts. Fits 1" to ½" Arbor Size 2 1/2" X 18 15/16" Belts (2 1/2" X 6" 6" X 2 1/2" Wide, Lortone, EX 625 Drums) 341020 EXACT FIT Drum, Uses 2 ½" X $29.50 UNCHARGED CORK BELTS For use 18 15/16" Belts. Fits 1/2" Arbor Size on Expandable Drum, Belts are 6" X 2 1/2" Wide, Lortone, EX 625 315030 3" X 25 7/32" Belts (3" X 8" Scott- $11.00 341030 EXACT FIT Drum, Uses 2 ½" X $29.50 Murray type drums) 18 15/16" Belts. Fits 5/8" Arbor Size 315040 UNCHARGED CORK BELTS For use $12.00 6" X 2 1/2" Wide, Lortone, EX 625 on Gryphon Wet Belt Sander, 3" X 30" 341040 EXACT FIT Drum, Uses 2 ½" X $29.50 RESIN BONDED CERIUM OXIDE 18 15/16" Belts. Fits 3/4" Arbor Size 6" X 2 1/2" Wide, Lortone, EX 625 380010 POLISH BELT For use on Expandable $37.10 Drum, Belts are 1 1/2" X 18 15/16" Belts 341050 EXACT FIT Drum, Uses 2 ½" X $29.50 (1 1/2" X 6" Drums) 18 15/16" Belts. Fits 1" Arbor Size

35 POLISHING DRUMS & BELTS / DISCS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

EXPANDABLE DRUMS expand by rotation to Polishing buffs are supplied with a soft reinforced leather center or hold sanding belts in place. Belts can be hardened shellac center for use with a spiral spindle arbor shaft end. easily changed when stopped. These drums are made from carefully formulated rubber and The MUSLIN buff is used for fast cutdown of material. are flexible enough to bend to the stone. The COTTON FLANNEL buff is used for final polish. Maximum RPM is 1750. RUN ONLY WITH THE BELT ON!!! These buffs are normally used to polish metal, However with the right polish compound such as This is the best type of drum on the market, bar Tripoli, Fabuluster or Zam, they can be used it’s what I use!!! to polish soft rocks.

POLISHING BUFFS EX DRUMS are lightweight, two piece MLS PART PARTS DESCRIPTION PRICE sanding drums with resilient foam rubber NUMBER center ring. Split the drum and remove the 3" Dia. MUSLIN BUFF, 35 Ply, 3 Rows ring to change the belts. 360010 Stitching $3.70 3" Dia. COTTON FLANNEL BUFF, 30 360020 Ply, 3 Rows Stitching $5.00 6" Dia. MUSLIN BUFF, 50 Ply, 4 Rows 360310 $8.00 POLISHING DRUMS Stitching MLS PART PARTS DESCRIPTION PRICE 6" Dia. COTTON FLANNEL BUFF, 30 NUMBER 360320 Ply, 4 Rows Stitching $8.30 8" X 3" Wide SCOTT-MURRAY or 341060 Equal Expandable Drum, Uses 3" X 25 $85.00 7/32" Belts. Fits 1" to ½" Arbor Size 8" X 3" Wide, Lortone, EX 83 EXACT SOLID FELT WHEELS - Now in those hard to find larger sizes and all 341070 FIT Drum, Uses 3" X 25 1/8" Belts. Fits $39.50 three hardnesses. Buffs are made of high grade wool felt compressed ½" Arbor Size for uniform texture and hardness. For polishing and lapping metal and stones. Can be charged with polishing compounds. Wheels are bored 8" X 3" Wide, Lortone, EX 83 EXACT to 1" and may be bushed to fit 3/4", 5/8" and 1/2" arbors. 341080 FIT Drum, Uses 3" X 25 1/8" Belts. Fits $39.50 5/8" Arbor Size SOLID FELT WHEELS 8" X 3" Wide, Lortone, EX 83 EXACT WHEEL WHEEL MLS PART FIT Drum, Uses 3" X 25 1/8" Belts. Fits 341090 $39.50 SIZE HARDNESS NUMBER Price 3/4" Arbor Size 8" X 3" Wide, Lortone, EX 83 EXACT 6" X 1 ½" Hard 351010 $71.90 341100 FIT Drum, Uses 3" X 25 1/8" Belts. Fits $39.50 6" X 1 ½" Medium 351020 $61.95 1" Arbor Size 6" X 1 ½" Soft 351030 $55.30 Replacement foam rubber band for 8" X 1 ½" Hard 351040 $127.80 341110 Lortone EX 625 (6" dia.) Drum $6.80 8" X 1 ½" Medium Replacement foam rubber band for 351050 $110.10 341120 Lortone EX 83 (8" dia.) Drum $7.90 8" X 1 ½" Soft 351060 $90.25 DISCS

SILICON CARBIDE DISCS (NON-PSA) DISC 36 Mesh 60 Mesh 100 Mesh 220 Mesh 320 Mesh 400 Mesh 600 Mesh 800 Mesh Price Price Price DIA. MLS Part # MLS Part # MLS Part # MLS Part # MLS Part # MLS Part # MLS Part # MLS Part # 6" 420110 $1.65 420115 $1.45 420120 420130 420140 420150 420160 420170 $1.30 8" 420210 $2.45 420215 $2.20 420220 420230 420240 420250 420260 420270 $1.95 10" 420310 $3.10 420315 $2.75 420320 420330 420340 420350 420360 420370 $2.45 12" 420410 $3.75 420415 $3.40 420420 420430 420440 420450 420460 420470 $3.00 M.L.S. STOCKS A WIDE VARIETY OF SILICON CARBIDE AND DIAMOND DISC ABRASIVE PRODUCTS. CUSTOM ABRASIVE DISCS IN ALMOST ANY SIZE OR SPECIFICATION CAN BE ORDERED UPON REQUEST. 36 DISCS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com LEATHER / FELT / FOAM RUBBER DISCS COWHIDE ELK HIDE FELT PAD (NON-PSA) RUBBER PAD (NON-PSA) DESCRIPTION MLS PART No. Price MLS PART No. Price MLS PART No. Price MLS PART No. Price 6" DIA. NO HOLE 410010 $6.00 411010 $8.00 412010 $4.90 413010 $4.90 8" DIA. NO HOLE 410020 $9.00 411020 $13.50 412020 $6.95 413020 $5.40 10" DIA. NO HOLE 410030 $16.00 411030 $22.00 N/A N/A N/A N/A

THIN DISC HARD DIAMOND DISCS MLS LANCER THIN DISCS are an economically priced imported diamond disc featuring a thin, facet/cabochon discs with ½" arbor hole, at a highly competitive prices. Must be used with a master lap on facet machines.

DIAMOND GRINDING DISCS are precision diamond discs bonded to a plastic backing plate. These discs offer a flat parallel grinding surface face for faceting, inlay, general lapidary and glass grinding applications. Also great for carbide DIAMOND GRINDING DISC Master Lap and high speed steel tool grinding and shaping. Discs come with a ½" arbor with BACKING PLATE LANCER THIN DISCS hole. 6" Dia. LANCER THIN 8" Dia. LANCER THIN 6" Dia. GRINDING DISC 8" Dia. GRINDING DISC DIAMOND MESH SIZE DISC DISC WITH BACKER PLATE WITH BACKER PLATE MLS PART No. Price MLS PART No. Price MLS PART No. Price MLS PART No. Price 80 400010 $46.00 401010 $56.00 402010 $79.00 403010 $99.00 100 400020 $38.00 401020 $48.00 402020 $79.00 403020 $99.00 180 400030 $34.00 401030 $44.00 402030 $79.00 403030 $99.00 260 400040 $28.00 401040 $36.00 402040 $59.00 403040 $69.00 360 400050 $28.00 401050 $36.00 N/A N/A N/A N/A 600 400060 $22.00 401060 $32.00 402060 $59.00 403060 $69.00 1200 400070 $20.00 401070 $30.00 402070 $59.00 403070 $69.00 3000 400080 $50.00 401080 $60.00 N/A N/A N/A N/A SPECIALTY DISCS BACKING PLATE - A precision laser cut Lucite backing 6" DIAMETER 8" DIAMETER plate used to back up thin polish discs, diamond Toppers ITEM DESCRIPTION Sanding discs and silicon carbide discs. Manufactured to MLS PART No. Price MLS PART No. Price exact precisions, flat and parallel within .001". Arbor hole PLASTIC BACKING I/2" diameter. PLATE FOR AMERITOOL FLAT 414010 $20.00 414020 $25.00 SPONGE PAD - 1/8" thick sponge pad with pressure- LAPS (½" ARBOR) sensitive adhesive (PSA) backing. Use under diamond sanding disc, felt pads or white polish pads to cushion PLASTIC BACKING and help remove flat spots from cabochons. NO HOLE! PLATE FOR HI-TECH 417010 $20.50 417020 $25.50 FLAT LAPS (½" ARBOR) WHITE POLISH PAD - A polish pad used by cutters who SPONGE DISC want to charge their polish disc with diamond compounds (PSA) Backed 415010 $6.00 415020 $8.00 or oxide polishes to achieve a mirror polish on their gemstones or glass. These pressure-sensitive adhesive WHITE POLISH DISC 416010 $14.00 416020 $18.00 (PSA) backed pads are a great substitutes for leather (PSA) Backed and felt discs. NO HOLE. RESIN BONDED CERIUM OXIDE POLISH 418010 $15.00 418020 $18.35 CERIUM OXIDE PAD – Put a mirror polish on stone or DISC, (PSA) Backed glass. Pre-charged pad, use with water, (PSA) backing. NO HOLE. NOTE: The ROTARY FLAT LAP in its various incarnations has turned into my handiest lapidary tool. I not only cut “cabs” on it, I also do a lot of face polishing. What I use my wheeled arbor for is to “HOG” off large quantities of rock to shape my stone. I then use my DIAMOND FLAT LAP to do the delicate finish work including finish grinding, sanding and polishing. 37 DISCS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com DIAMOND SANDING / POLISH DISCS MLS PART PRICE NUMBER PARTS DESCRIPTION MINI SANDING DISC REFILL 1" DIAMETER NO 1" Dia. MINI SANDING DIAMOND HOLE DISC (PSA) DISC SET, each set MESH SIZE MLS PART contains 4 - 1" rubber No. Price mandrels with 1/8" shafts, 3 220 (Purple) 443020 $5.25 each of the 325, 600, 1,200 442010 Mesh Diamond Sanding $29.00 325 (Brown) 443030 $5.25 discs and 3 White Polish 600 (Red) 443040 $5.25 Pads. A 1 gram tube of 1,200 (Blue) 14,000 Mesh Diamond 443050 $5.25 Compound is also included. 3,000 (Orange) 443060 $5.25 (EACH SANDING 8,000 (yellow) 443070 $5.25 6" DIAMETER NO 8" DIAMETER NO DIAMOND HOLE DISC (PSA) HOLE DISC (PSA) DISC SET WHITE Polish Disc 444010 $3.25 MESH SIZE MLS PART MLS PART CONTAINS 3 No. Price No. Price DISCS) 1" Rubber 445010 $4.50 100 (Black) 440010 $29.00 441010 $39.00 Mandrel 220 (Purple) 440020 $29.00 441020 $39.00 DIAMOND SANDING / POLISH DISCS - These discs are made of a unique 325 (Brown) 440030 $29.00 441030 $39.00 blend of diamond powders mixed with resins which is applied to a tough 600 (Red) 440040 $29.00 441040 $39.00 synthetic pressure sensitive adhesive (PSA) backing pad. Each mesh size diamond is a different color allowing easy identification of diamond size. 1,200 (Blue) 440050 $29.00 441050 $39.00 The color is also an easy way to determine the condition of the pad. AS 3,000 (Orange) 440060 $29.00 441060 $39.00 LONG AS YOU HAVE COLOR, YOU HAVE DIAMONDS!!! These discs provide a superior polish. THEY ARE WHAT I USE!!! These discs 8,000 (Yellow) 440070 $29.00 441070 $39.00 MUST be run WET!!!! FACET DISCS - These discs are made from a steel or FACETING DISCS - HARD metal alloy backing plate precision machined and balances. On the steel backing plate diamonds are 6" DIAMETER DISC 8" DIAMETER DISC electro plated directly to the plate. On the alloy backing DIAMOND MESH SIZE ½" ARBOR HOLE ½" ARBOR HOLE plate the nickel bonded diamond topper plate is applied MLS PART No. Price MLS PART No. Price using a hydraulic press. Discs come with standard ½" 80^ 450010 $155.00 451010 $225.00 diameter arbor hole. Discs with a + are steel + backed discs; with a ^ are alloy backed. 100 450020 $68.00 451020 $86.00 NuBond Laps - Multilayer NuBond laps have a higher 180^ 450030 $106.00 451030 $133.00 + concentration of friable, self sharpening diamonds 260 450040 $58.00 451040 $80.00 bonded directly to a solid aluminum backer, NuBond 360^ 450050 $91.00 451050 $110.00 laps are precise and true running, lightweight and + corrosion resistant. ½" Arbor hole. 600 450060 $52.00 451060 $70.00 + UNCHARGED LAPS - All uncharged lapping discs 1,200 450070 $52.00 451070 $70.00 are precision machined for good balance and 1,800^ 450080 $91.00 451080 $110.00 minimal vibration. They come in several type of 3,000+ 450090 $66.00 451090 $84.00 materials to be charged by the craftsman with his or her personal preference of diamond or other 8,000^ 450100 105.00 451100 $140.00 abrasives. All uncharged lapping discs come with ½" diameter arbor hole. UNCHARGED LAPS NuBond DIAMOND 6" DIAMETER DISC 8" DIAMETER DISC SANDING/PREPOLISH LAPS MATERIAL TYPE ½" ARBOR HOLE ½" ARBOR HOLE MLS PART No. Price MLS PART No. Price DISC DIAMOND MLS Price DIAMETER MESH SIZE PART No. BATT LAP 466010 $100.00 466020 $132.00 6" 325 452010 $126.70 CERAMIC 464010 $195.50 464020 $264.50 6" 600 452020 $126.70 COPPER LAP 460010 $60.00 460020 $76.00 6" 1,200 452030 $126.70 DARKSIDE LAP 467010 $75.00 467020 $94.00 8" 325 452110 $158.35 LUCITE LAP 461010 $23.30 461020 $30.00 8" 600 452120 $158.35 MASTER 465010 $26.40 465020 $33.00 8" 1,200 452130 $158.35 PHENOLIC 462010 $60.00 462020 $80.00 38 DISCS / POLISHING HEADS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com ULTRA LAPS - No polishing mess! Each lap has a ULTRA LAPS uniform layer of polishing compound on a thin polyester film. For only a few cents per stone, Number 6" DIAMETER DISC 8" DIAMETER DISC MATERIAL TYPE and eliminate scratching while faceting or cabbing. For In ½" ARBOR HOLE ½" ARBOR HOLE use with water. Fast, clean and reusable. ½" arbor PARTICLE SIZE hole. Package MLS PART No. Price/Pkg. MLS PART No. Price/Pkg NOTE - Spectra Cerium Oxide discs are 99% pure ALUMINUM OXIDE, 0.3 micron 5 cerium oxide and offer faster polishing than regular 470010 $9.40 470020 $14.40 cerium oxide Ultra Laps. CERIUM OXIDE (45% Cerium Oxide), 1.5 micron 5 471010 $9.30 471020 $13.75 CERIUM OXIDE “Spectra” (99.9% Cerium Oxide) , 1.5 micron 5 471110 $14.30 471120 $18.20 CERIUM OXIDE “Spectra” (99.9% Cerium NEW Oxide), 0.5 micron 5 471210 $14.30 471220 $18.20 CHROME OXIDE, 0.5 micron 5 472010 $7.70 472020 $9.00 DIAMOND, 1.0 micron 1 475010 $13.70 475020 $24.00 DIAMOND, 0.5 micron 1 475012 $13.70 475022 $24.00 DIAMOND, 0.10 micron 1 475014 $13.70 475024 $24.00 TIN OXIDE, 1.2 micron 5 474010 $9.40 474020 $14.40 POLISHING HEADS (DISCS) THREAD DISC FACE LAPCRAFT DISC DISC TYPE MLS PART Price SIZE TYPE TYPE No. POLISHING PADS Sponge & Untreated 4" ¼"-20 R.H. Stud Plastic Spin-On Canvas Pad 490010 $8.50 DURA-TEX - Specially treated for use with 180 thru 1,800 mesh diamond compound. 4" ¼"-20 R.H. Stud Plastic Spin-On Sponge & 490020 $9.75 Rough Leather Pad MICRO-TEX - Not as dense or durable as Dura-Tex, but more Sponge & versatile. For use with 260 thru 3,000 mesh 4" ¼"-20 R.H. Stud Plastic Spin-On Smooth Leather Pad 490030 $9.75 diamond compounds. 5 ½" ¼"-20 R.H. Stud Plastic Spin-On Sponge & 490110 $12.00 POLY-TEX - Get mirror finishes with this pad. A blend of both Untreated Canvas Pad natural and synthetic fibers. Recommended for Sponge & 3,000 thru 50,000 mesh diamond compounds. 5 ½" ¼"-20 R.H. Stud Plastic Spin-On Rough Leather Pad 490120 $15.95 4" DIAMETER DISC 5 ½" ¼"-20 R.H. Stud Plastic Spin-On Sponge & MATERIAL Smooth Leather Pad 490130 $15.95 NO HOLE (PSA) TYPE 6" ¼"-20 R.H. Stud Plastic Spin-On Sponge Pad 491010 $18.50 MLS PART No. Price 6" ¼"-20 R.H. Stud Plastic Spin-On Sponge & Felt Pad 491020 $21.50 DURA-TEX 480010 $5.75 6" ¼"-20 L.H. Stud Plastic Spin-On Sponge Pad 491110 $18.50 MICRO-TEX 481010 $4.00 6" ¼"-20 L.H. Stud Plastic Spin-On Sponge & Felt Pad 491120 $21.50 POLY-TEX 482010 $5.00

BELOW IS AN INVENTORY OF “SOLID” ALUMINUM POLISH 6" DIAMETER DISC MATERIAL NO HOLE (PSA) HEADS WE ARE CLOSING OUT. WHEN THEY ARE GONE TYPE MLS PART No. Price THEY ARE GONE. DON’T SEE THE SIZE YOU ARE DURA-TEX 480020 $8.75 LOOKING FOR, FLIP TO THE NEXT PAGE, PAGE 40, AND MICRO-TEX 481020 $6.50 MAKE YOUR OWN POLISH HEAD!!!! POLY-TEX 482020 $8.00 6" ½"-20, L.H., FM Cast Aluminum Sponge Pad 494020 $50.00 6" ½" Smooth Bore Cast Aluminum Sponge Pad 494030 $50.00 8" DIAMETER DISC MATERIAL NO HOLE (PSA) 6" 5/8"-18, L.H., FM Cast Aluminum Sponge Pad 494050 $50.00 TYPE MLS PART No. Price 6" 5/8" Smooth Bore Cast Aluminum Sponge Pad 494060 $50.00 DURA-TEX 6" ¾"-16, R.H., FM Cast Aluminum Sponge Pad 494070 $50.00 480030 $15.00 MICRO-TEX 6" ¾"-16, L.H., FM Cast Aluminum Sponge Pad 494080 $50.00 481030 $10.00 POLY-TEX 482030 $13.00 6" 3/4" Smooth Bore Cast Aluminum Sponge Pad 494090 $50.00 8" ½"-20, R.H., FM Cast Aluminum Sponge Pad 495010 $60.00 There’s nothing like 8" ½"-20, L.H., FM Cast Aluminum Sponge Pad 495020 $60.00 8" 5/8"-18, L.H., FM Cast Aluminum Sponge Pad 495050 $60.00 working ROCKS in a 8" 5/8" Smooth Bore Cast Aluminum Sponge Pad 495060 $60.00 warm shop on a “COLD” 8" ¾"-16, R.H., FM Cast Aluminum Sponge Pad 495070 $60.00 Minnesota night!!!! 39 POLISHING HEADS / DIAMOND DRILL BITS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com UNIVERSAL / INTERCHANGEABLE FACEPLATE A new product for M.L.S. A complete POLISHING HEAD (Disc) for mounting on an arbor shaft requires the appropriate sized FACEPLATE and correct sized/threaded HUB. The faceplates are made from ¼” thick aluminum machined on both sides. Hubs are machined from aluminum bar stock designed to be bolted to the faceplate with 3 hex headed cap screws.

HUB ADAPTER

DISCS & HUBS FACEPLATE ITEM MLS PART No. Price ITEM MLS PART No. Price 6" FACEPLATE 497100 $29.00 3/4” S.B. HUB 497030 $14.70 8" FACEPLATE 497200 $36.50 3/4” - 16 R.H. HUB 497032 $14.70 1/2” S.B. HUB 497010 $14.70 3/4” - 16 L.H. HUB 497034 $14.70 1/2” - 20 R.H. HUB 497012 $14.70 1” S.B. HUB 497040 $14.70 1/2” - 20 L.H. HUB 497014 $14.70 1” - 12 R.H. HUB 497042 $14.70 5/8” S.B. HUB 497020 $14.70 1” - 12 L.H. HUB 497044 $14.70 5/8” - 18 R.H. HUB 497022 $14.70 NOTE: S.B. = Smooth Bore L.H. = Left Hand Fine Thread 5/8” - 18 L.H. HUB 497024 $14.70 R.H. = Right Hand Fine Thread

COMPLETE POLISHING HEAD (Disc) DIAMOND DRILL BITS SOLID DRILL BITS - are made from sharp man made I have done extensive testing. For holes under 3 mm., the MICRO diamonds bonded (nickel plated) to a solid tempered CORE DRILL BIT work best followed by the SOLID DRILL BITS. steel core. My test coupons were ¼" thick Brazilian Agates using a 1 mm drill bit at 1,000 RPM and using MLS “DIAMOND LUBE”. The hollow bits gave SOLID DRILL BITS (Plated Diamond) me about 25 holes while the solid bits gave me 7 holes. BIT SINGLE BITS 6 PACK OF BITS At 2,500 RPM I got half as many holes, at 5,000 RPM I got 5 holes on DIAMETER MLS PART No. Price MLS PART No. Price the hollow core and ZERO holes on the solid bit. 0.75 mm 555011 $2.00 555016 $10.80 MICRO CORE DRILL BITS 1.00 mm 555021 $2.00 555026 $10.80 (Plated Diamonds) 1.25 mm 555031 $2.00 555036 $10.80 1.50 mm 555041 $2.00 555046 $10.80 OUTER SINGLE BITS 6 PACK OF BITS 1.75 mm DIAMETER 555051 $2.00 555056 $10.80 MLS PART No. Price MLS PART No. Price 2.00 mm 555061 $2.00 555066 $10.80 1.00 mm 551011 $4.00 551016 $21.60 2.25 mm 555071 $4.50 555076 $23.00 1.25 mm 551021 $4.00 551026 $21.60 2.50 mm 555081 $2.00 555086 $10.80 1.50 mm 551031 $4.00 551036 $21.60 3.00 mm 555091 $5.50 555096 $28.00 1.75 mm 551041 $4.00 551046 $21.60 3.50 mm 555101 $6.00 555106 $30.00 2.00 mm 551051 $4.00 551056 $21.60 4.00 mm 555111 $6.50 555116 $35.00 2.50 mm 551061 $4.00 551066 $21.60 MLS PART PRICE 3.00 mm 551071 $4.00 551076 $21.60 NUMBER PARTS DESCRIPTION ASSORTED SIX PACK of SOLID 3.50 mm 551081 $4.00 551086 $21.60 555120 DIAMOND DRILL BITS - 1 each of ¾, 1, $10.80 MLS PART PRICE 1 ¼, 1 ½, 2 and 2 ½ mm bits. NUMBER PARTS DESCRIPTION ASSORTED ELEVEN PACK of SOLID ASSORTED SIX PACK of MICRO DIAMOND DRILL BITS - 1 each of ¾, 1, HOLLOW CORE DIAMOND DRILL 555130 1 ¼, 1 ½, 1 ¾, 2, 2 ¼, 2 ½, 3, 3 ½ and 4 $32.85 551200 BITS - 1 each of 1, 1 ½, 2, 2 ½, 3 and $21.60 mm bits. 3 1/2 mm bits.

40 DIAMOND DRILLS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com DIAMOND DRILL BITS SINTERED CORE DRILLS - just like sintered rim saw These metal bonded hi-strength CORE DRILLS are blades have exposed diamond in a metal matrix around designed for fast cutting and long life. The rigid steel the rim. This means that they last much longer than their shanks are plated and rust free. 60 mesh diamonds electroplated counter parts. These core drills are used. Drill bits are measured by outside diameter. recommended for long life industrial use on marble and These are AMERICAN made bits. granite. CORE DRILL BITS (Plated Diamond)

CORE DRILL BITS (Sintered) CORE SHANK SINGLE BITS DIAMETER DIAMETER MLS PART No. Price OUTER INNER SINGLE BITS DIAMETER DIAMETER 1/4 Inch 5/32 Inch 550010 $30.00 MLS PART No. Price 5/16 Inch 5/32 Inch 550020 $31.00 0.50 Inch 0.37 Inch 560010 $30.00 3/8 Inch 1/4 Inch 550030 $33.00 0.75 Inch 0.62 Inch 560020 $36.00 7/16 Inch 1/4 Inch 550040 $35.00 1.00 Inch 0.86 Inch 560030 $54.00 1/2 Inch 1/4 Inch 550050 $38.00 1.25 Inch 1.10 Inch 560040 $60.00 9/16 Inch 1/4 Inch 550060 $40.00 1.50 Inch 1.35 Inch 560050 $84.00 5/8 Inch 3/8 Inch 550070 $42.00 2.00 Inch 1.80 Inch 560060 $102.00 11/16 Inch 3/8 Inch 550080* $46.00 ABOUT DRILLING HOLES IN ROCKS 3/4 Inch 3/8 Inch 550090 $48.00 One of the most difficult lapidary skills I know of is drilling holes in 13/16 Inch 3/8 Inch 550100* $52.00 rocks. The best method uses something called an “ULTRA-SONIC 7/8 Inch 3/8 Inch DRILL”. These machines work great, however they cost about 550110* $55.00 $2,000.00!!! The next best bet is using a diamond plated or sintered 1 Inch 3/8 Inch 550120 $60.00 drill bit. 1 1/16 Inch 3/8 Inch 550130* $65.00

CRINKLE RIM BONDED DIAMOND CORE DRILLS can be used on both stone or glass. Used frequently for drilling holes for clock faces and wine bottles for lamps. The crinkled edge quickly removes debris for more diamond cutting surface contact. Use on a drill press, ideally with a water swivel adapter. CORE DRILL CORE DRILL BITS (Crinkled Rim Bonded Diamonds) OUTSIDE OUTSIDE OUTSIDE OUTSIDE MLS PART MLS PART DIAMETER DIAMETER Price DIAMETER DIAMETER Price No. No. (mm) (Inches) (mm) (Inches) RECOMMENDED 4 mm 5/32 Inch 540010 $4.00 20 mm 51/64 Inch 540170 $18.00 CORE DRILL 5 mm 13/64 Inch 540020 $4.50 21 mm 53/64 Inch 540180 $18.50 SPEEDS 6 mm 15/64 Inch 540030 $6.00 22 mm 7/8 Inch 540190 $19.00 UP TO ¼” O.D. 7 mm 1/4 Inch 540040 $7.00 23 mm 29/32 Inch 540200 $19.50 750 to 1,000 8 mm 5/16 Inch 540050 $8.00 24 mm 61/64 Inch 540210 $19.50 R.P.M. 9 mm 23/64 Inch 540060 $9.00 25 mm 1 Inch 540220 $20.00 ¼” to ½” O.D. 10 mm 25/64 Inch 540070 $10.00 26 mm 1 1/32 Inch 540230 $20.50 650 to 850 R.P.M. 11 mm 7/16 Inch 540080 $10.50 27 mm 1 3/32 Inch 540240 $21.00 12 mm 15/32 Inch 540090 $11.00 28 mm 1 1/8 Inch 540250 $21.00 ½” to ¾” O.D. 13 mm 1/2 Inch 540100 $11.50 29 mm 1 5/32 Inch 540260 $21.50 500 to 750 R.P.M. 14 mm 9/16 Inch 540110 $12.00 30 mm 1 13/64 Inch 540270 $23.00 15 mm 19/32 Inch 540120 $13.00 31 mm 1 1/4 Inch 540280 $24.00 ¾” to 1" O.D. 400 to 650 R.P.M. 16 mm 41/64 Inch 540130 $14.00 32 mm 1 17/64 Inch 540290 $24.50 17 mm 43/64 Inch 540140 $15.00 33 mm 1 19/64 Inch 540300 $25.00 1" to 1 3/8” O.D. 18 mm 23/32 Inch 540150 $16.00 34 mm 1 3/8 Inch 540310 $25.50 250 to 500 R.P.M. 19 mm 3/4 Inch 540160 $17.00 35 mm 1 13/32 Inch 540320 $26.00 * - Item not normally stocked. 41 DIAMOND CARVING BITS & BURS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

GRYPHETTE GRINDING HEADS AVAILABLE LAMP or TAPER ECONOMY PLATED DIAMOND SLITTER SET CARVING TOOL SET DIAMOND GRINDING HEADS MLS PART PARTS DESCRIPTION PRICE DIAMETER ABRASIVE MLS PART NUMBER HEAD STYLE PRICE (Inches) SIZE NUMBER ECONOMY SMALL PROFILE DIAMOND (Plated) CARVING TOOL STANDARD 3/4 Coarse 292110 $14.00 SET Includes balls, cylinders, tapers, STANDARD 3/4 Medium 571010 etc. 30 Pieces in each set, 3/32" shank, $14.00 292112 $14.00 120 Mesh diamond, plastic storage STANDARD 3/4 Fine 292114 $14.00 case. STANDARD 1 Coarse 571011 Same as above, except 46 Mesh $14.00 292116 $14.00 STANDARD 1 Medium 571012 Same as above, except 240 Mesh $14.00 292118 $14.00 STANDARD 1 Fine 571013 Same as above, except 400 Mesh $14.00 292120 $14.00 GROOVE GRINDER 571014 Same as above, except 600 Mesh $14.00 1.0 mm, 20 -22 ga. wire 1 Medium 292122 $14.00 ECONOMY LARGE PROFILE GROOVE GRINDER 1 Medium 292123 $14.00 DIAMOND (Plated) CARVING TOOL 1.4 mm, 16 -18 ga. wire 571020 SET Includes balls, cylinders, tapers, $18.00 GRINDING PIN 1/4 Coarse 292124 $12.75 etc. 30 Pieces in each set, 3/32" shank, 120 Mesh diamond plastic storage case. GRINDING PIN 1/8 Coarse 292126 $12.75 ECONOMY DIAMOND (Plated) MEGA- LAMP OR TAPER 5/8 Medium 292128 $14.00 CARVING TOOL S ET Includes balls, cylinders, tapers, cones, reverse cones $30.00 571030 etc. Lots of variety. 50 pieces in each DIAMOND CARVING TOOLS (SINTERED) set, 1/8" shank, 120 mesh diamond, Sintered diamond tools are multi-layered and last many times longer plastic storage case. than plated tools. Sintered diamond tools have a 3/32" shank (2.35 mm) and 120 Mesh diamonds. Max RPM 25,000. ECONOMY DIAMOND (Plated) SLITTER TOOL SET 6 each - 7/8" 571040 diameter blades, one 1/8" shank $10.00 mandrel, plastic case SINTERED BIT SET - Set of the 10 DBS-014 DBS-068 DBS-143 DBS-114 DBS-160 sintered DIAMOND carving bits shown Inverted Rounded Rounded 576110 $120.00 Cylinder Point on the left. 3/32" dia. shank, 120 Mesh Cone Disc Cone diamonds

DBS-175 DBS-200 DBS-274 DBS-276 DBS-523 Tapered Rounded Flame Bullet Cone Cylinder Cone DIAMOND CARVING BITS (Sintered) DIMENSIONS SINGLE BITS STYLE HEAD HEAD LENGTH DIAMETER SINTERED CARVING DISC (mm) (mm) MLS PART No. Price MLS PART PRICE NUMBER PARTS DESCRIPTION DBS-014 2.5 6.1 576010 $14.00 NEOSINT SINTERED CARVING DISC, DBS-068 2.8 5.9 576020 $14.00 50 mm diameter X 1/8” thick, 120 Mesh DBS-114 14.0 5.2 576030 $14.00 576500 diamond, ¼” Shank. Ideal for cutting $20.00 and carving larger pieces. It is a favorite DBS-143 13.3 3.7 576040 $14.00 of Jade carvers. DBS-160 12.5 3.3 576050 $14.00 DBS-175 14.0 5.1 576060 $14.00 DBS-200 13.8 3.5 576070 $14.00 WE LIKE ROCKS, DBS-274 13.8 6.3 576080 $14.00 ROCKS ARE GOOD!!! DBS-276 14.0 5.3 576090 $14.00 DBS-523 14.0 5.3 576100 $14.00

42 DIAMOND POWDER, PASTES AND SPRAY “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com DIAMOND POWDER DIAMOND DIAMOND 1 CARAT VIAL 5 CARAT VIAL 10 CARAT VIAL 25 CARAT VIAL MICRON MESH SIZE SIZE MLS PART No. Price MLS PART No. Price MLS PART No. Price MLS PART No. Price 1/4 100,000 590010 $4.50 591010 $12.00 592010 $16.00 593010 $30.00 1/2 50,000 590020 $4.50 591020 $12.00 592020 $16.00 593020 $30.00 1 14,000 590030 $4.50 591030 $12.00 592030 $16.00 593030 $30.00 3 8,000 590040 $4.50 591040 $12.00 592040 $16.00 593040 $30.00 6 3,000 590050 $4.50 591050 $12.00 592050 $16.00 593050 $30.00 9 1,800 590060 $4.50 591060 $12.00 592060 $16.00 593060 $30.00 15 1,200 590070 $4.50 591070 $12.00 592070 $16.00 593070 $30.00 30 600 590080 $4.50 591080 $12.00 592080 $16.00 593080 $30.00 45 325 590090 $4.50 591090 $12.00 592090 $16.00 593090 $30.00 60 220 or 260 590100 $5.00 591100 $15.00 592100 $24.00 593100 $45.00 -- 180 590110 $5.00 591110 $15.00 592110 $24.00 593110 $45.00 80 100 590120 $5.00 591120 $15.00 592120 $24.00 593120 $45.00 -- 80 590130 $5.00 591130 $15.00 592130 $24.00 593130 $45.00 -- 60 590140 $5.00 591140 $15.00 592140 $24.00 593140 $45.00 DIAMOND COMPOUNDS DIAMOND POWDERS - are produced under ultra-modern DIAMOND DIAMOND 2 GRAM TUBE 5 GRAM TUBE 10 GRAM TUBE laboratory conditions using MICRON electronically automated grading MESH machines. Grading is accomplished SIZE SIZE MLS PART No. Price MLS PART No. Price MLS PART No. Price by employing the principles of “Stokes Law” - not sieves. The end 1/4 100,000 580012 $4.50 580015 $8.00 580110 $16.00 result yields precision closer than the Bureau of Standards specifications. 1/2 50,000 580022 $4.50 580025 $8.00 580120 $16.00 The diamonds used in our products are all MAN MADE!!! 1 14,000 580032 $4.50 580035 $8.00 580130 $16.00 3 8,000 580042 $4.50 580045 $8.00 580140 $16.00 MLS HAS 6 3,000 580052 $4.50 580055 $8.00 580150 $16.00 AVAILABLE 9 1,800 580062 $4.50 580065 $8.00 580160 $16.00 LARGER SIZED VIALS OF 15 1,200 580072 $4.50 580075 $8.00 580170 $16.00 DIAMOND 30 600 580082 $4.50 580085 $8.00 580180 $16.00 POWDERS. 45 325 580092 $4.50 580095 $8.00 580190 $16.00 CONTACT US FOR 60 220 580102 $4.50 580100 $8.00 580200 $16.00 PRICES AND AVAILABILITIES DIAMOND COMPOUNDS - Must be used with some type of EXTENDER FLUID. MLS offers two types of extender fluids. MLS PART MLS PART PRICE PRICE NUMBER PARTS DESCRIPTION NUMBER PARTS DESCRIPTION EXTENDER FLUID, 2 Oz. Dropped EXTENDER FLUID - GEM LUBE - By 781010 bottle. Silicon based extender fluid used $6.00 Diamond Pacific, 2 ½ Oz. Aerosol bottle primarily on horizontal surfaces. 781020 silicon extender fluid. Use on canvas, $10.45 EXTENDER FLUID, 16 Oz. bottle. leather and synthetic polish pads. Used 781015 Silicon based extender fluid used $17.95 primarily on vertical surfaces. primarily on horizontal surfaces. DIAMOND SPRAY DIAMOND DIAMOND 2 Oz. SPRAY BOT. DIAMOND DIAMOND 2 Oz. SPRAY BOT. DIAMOND SPRAY - MICRON MESH MICRON MESH is a sensible alternative to SIZE MLS PART No. Price SIZE MLS PART No. Price aerosol types. The spray is SIZE SIZE available in a 2 Oz. Pump bottles. The vehicle is designed 1/4 100,000 595010 $15.00 6 3,000 595050 $15.00 to dissipate quickly leaving a 1/2 50,000 15 1,200 uniform concentration of 595020 $15.00 595070 $15.00 exposed diamond particles on 1 14,000 595030 $15.00 30 600 $15.00 the work material. Simply apply 595080 the spray where the polish is 3 8,000 595040 $15.00 45 325 595090 $15.00 required. 43 MISC. TOOLS, EQUIPMENT & SUPPLIES “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

OPTIVISORS - This binocular magnifier is a necessity for top quality work. It is designed to flip easily out of the way and can be worn over glasses. The head band is also adjustable. Lens plates are easily removed for magnification change. LENS PLATES ARE MADE OF THE HIGHEST OPTICAL QUALITY GLASS NOT PLASTIC!!! Lenses are available in 6 different magnification powers. The OPTIVISOR with OPTIVISOR optiloupe attachment adds 2 ½ power to any lens. OPTILOUPE VISOR LIGHT

OPTIVISOR - COMPLETE & ACCESSORIES OPTIVISOR - LENS PLATES MAG. WORKING MAG. WORKING MODEL MLS PART No. Price MODEL MLS PART No. Price POWER DISTANCE POWER DISTANCE DA-2 1.5X 20 Inches 850010 $57.40 LP-2 1.5X 20 Inches 851010 $35.70 DA-3 1.7X 14 Inches 850020 $57.40 LP-3 1.7X 14 Inches 851020 $35.70 DA-4 2.0X 10 Inches 850030 $57.40 LP-4 2.0X 10 Inches 851030 $35.70 DA-5 2.5X 8 Inches 850040 $57.40 LP-5 2.5X 8 Inches 851040 $35.70 DA-7 2.7X 6 Inches 850060 $62.20 LP-7 2.7X 6 Inches 851050 $40.65 DA-10 3.5X 4 Inches 850070 $62.20 LP-10 3.5X 4 Inches 851060 $41.25 DA-0 HEAD PIECE, NO LENS 850005 $28.60 PLATED DIAMOND FILES LP-1 Adds 2.5 X OPTILOUPE 852010 $13.10 "

6 4 " 1 / LT-06 VISOR LIGHT, 10" Cord 852020 $30.20 4 / 3 "

1

4 " X /

LT-42 VISOR LIGHT, 42" Cord X 852030 $30.20 6

1 "

1 " / 1 X

2 3

LT-2204 LIGHT BULB FOR VISOR LIGHT / 852040 $8.15 X " 1

X

2

" / 2 "

5 1

2 X /

3

1 "

X 6 1

Remember 1 " X 8

" ROCKS ARE GOOD!!!!! 2 3 5 PLATED DIAMOND FILES/BLOCKS PLATED DIAMOND FILES/BLOCKS DIA. MESH FILE SIZE DIA. MESH FILE SIZE STYLE MLS PART No. Price STYLE MLS PART No. Price SIZE (Inches) SIZE (Inches) 1 200 5"X1"X3/16" 861010 $12.00 3 200 8"X3.5"X1/4" 865010 $34.00 1 400 5"X1"X3/16" 861020 $12.00 3 400 8"X3.5"X1/4" 865020 $34.00 1 600 5"X1"X3/16" 861030 $10.00 3 600 8"X3.5"X1/4" 865030 $30.00 1 1,200 5"X1"X3/16" 861040 $10.00 3 1,200 8"X3.5"X1/4" 865040 $30.00 2 200 6"X2.5"X1/4" 862010 $20.00 4 200 5"X1.5"X3/16" 866010 $16.00 2 400 6"X2.5"X1/4" 862020 $20.00 4 400 5"X1.5"X3/16" 866020 $16.00 2 600 6"X2.5"X1/4" 862030 $18.00 4 600 5"X1.5"X3/16" 866030 $14.00 2 1,200 6"X2.5"X1/4" 862040 $18.00 4 1,200 5"X1.5"X3/16" 866040 $14.00 4 400 / 1,200 5"X1.5"X3/16" 866060 $26.00 5 GALLON BUCKET SCREENS SCREEN MLS PART No. Price THESES SCREENS FIT SIZE INTO THE TOP OF A ½" 867010 $25.95 NORMAL 5 GALLON PLASTIC BUCKET. MADE ¼" 867020 $25.95 FROM AN IMPACT 8 mesh 867030 $25.95 RESISTANT PLASTIC BODY AND STAINLESS 12 mesh 867035 $25.95 STEEL SCREEN. THEY 20 Mesh 867040 $25.95 CAN BE NESTED. 50 Mesh 867050 $25.95 100 Mesh 867060 $25.95 5 GALLON BUCKET SCREENS 44 MISC. TOOLS, EQUIPMENT & SUPPLIES “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com MLS PART NUMBER EQUIPMENT DESCRIPTION PRICE SMALL ROCK CLAMP - Rock GATOR JAW 800010 Clamp by Lortone, This is a smaller version of $23.00 Jerry’s clamp. This vise is sized to work well in smaller trim and slab saws. LARGE ROCK CLAMP - Rock Clamp by Lortone, Sturdy parallel aluminum 800020 jaws with 2 sizes of hold down grooves. This is an $48.50 SMALL LARGE FEATHERING DISC LRG-1 inexpensive way to hold large pieces for slabbing. ADHESIVE ROCK ROCK 5 inch opening TUBE CLAMP CLAMP 800030 LRG-1 ROCK GRIPPER by Lortone, All $65.00 steel plated construction with pivoting top bar. V-BELT PULLEY (Cast Aluminum or Zinc) GATOR JAW by Lortone, Stainless steel PULLEY SHAFT 800040 construction, fits Lortone models LS12 and LSS- $29.50 MLS PART No. Price 14P saws. O.D. DIA. FEATHERING DISC ADHESIVE / FEATHERING DISC 1 ½" 1/2 Inch 050010 $4.10 ADHESIVE CEMENT by 3M, This lapidary wheel cement is SPRAY CAN 2" 5/8 Inch 770010 pressure sensitive. It allows all types of discs to be $24.95 050020 $4.50 placed on and removed from sponge rubber 2" 3/4 Inch 050030 $4.50 surfaces or metal discs repeatedly. 5 Oz. Tube. 2 1/4" 1/2 Inch 050040 $4.90 FEATHERING DISC ADHESIVE / 770020 $20.50 2 ½" 1/2 Inch 050050 $5.00 CEMENT, 17 Oz. spray can. EPOXY 2 ½” 5/8 Inch 050060 $5.10 EPOXY 220 by Hughes, Epoxy 220 bonds almost anything to anything. It has high heat and 2 ½" 3/4 Inch 050070 $5.20 760010 abrasion resistance and is not prone to running. $4.60 Amber color. Hardens in 2 hours. 1 Oz. Set. 2 ¾" 1/2 Inch 050080 $5.50 EPOXY 220 by Hughes, Same as above 760020 $22.25 TENAX except 8 Fl. Oz. Set (2 - 4 Oz. Bottles.) STEEL FLANGES (Plated) EPOXY 220 by Hughes, Same as above 760030 $31.60 FLANGE SHAFT except 16 Fl. Oz. Set (2 - 8 Oz. Bottles.) MLS PART No. Price EPOXY 330 by Hughes, Epoxy 330 bonds O.D. DIA. almost anything to anything. It has high heat and 1 ½ “ 1/2 Inch 761010 abrasion resistance and is not prone to running. $4.60 020010 $3.40 Water clear. Hardens in 2 hours. 1 Oz. Set. 1 ½" 5/8 Inch 020020 $3.40 EPOXY 330 by Hughes, Same as above 761020 $22.25 2" 1/2 Inch except 8 Fl. Oz. Set (2 - 4 Oz. Bottles.) OPTICON 020030 $3.90 EPOXY 330 by Hughes, Same as above 2" 5/8 Inch 020040 $3.90 761030 except 16 Fl. Oz. Set (2 - 8 Oz. Bottles.) $31.60 2" 3/4 Inch 020050 $3.90 750010 ATTACK by Hughes, Epoxy dissolver, 8 Fl. Oz. $13.20 Can. 3" 5/8 Inch 020060 $4.90 ATTACK by Hughes, Epoxy dissolver, 64 Fl. 750020 Oz. Can (½ Gallon). $46.50 3" 3/4 Inch 020070 $4.90 OPTICON by Hugh, Resin based fracture 762010 sealer, two part. 8 Fl. Oz. Total volume. $22.65 ATTACK TENAX by Hughes, Super glue, water clear, 771010 quick bonding, no mixing. ¼ Fl. Oz. Plastic bottle. $4.30 J325 J326 J327 TENAX+PLUS by Hughes, Super glue, water J327D 771020 clear, quick bonding, no mixing, thickened for gap $4.80 J325D J326D filling. ¼ Fl. Oz. Plastic bottle. SUPER SOLVENT by JBFC, Dissolves 751010 SUPER GLUE, 2 Fl. Oz. Plastic dropper bottle. $6.95 J345 J346 J347 E-6000 Co-polymer formula, will bond just about METAL TEMPLATES 773010 anything to anything, water clear. 1 Fl. Oz. Tube. $4.70 MODEL STYLE MLS PART No. Price E-6000 Co-polymer formula, will bond just about 773020 anything to anything, water clear. 3.7 Fl. Oz. Tube. $7.30 J325 Blue Metal 830010 $6.70 POUR-ON heavy build epoxy, like 50 coats of J325D Blue Metal Double 830020 $15.75 774010 sealer, water clear high gloss. 8 Fl. Oz. ( 2 - 4 Fl. $16.20 J326 Gold Metal 830030 $6.70 Oz. Bottles) Enough for 2 square feet. J326D Gold Metal Double 830040 $15.75 POUR-ON heavy build epoxy, like 50 coats of 774020 sealer, water clear high gloss. 32 Fl. Oz. ( 2 - 16 $44.00 J327 Red Metal 830050 $6.70 Fl. Oz. Bottles) Enough for 8 square feet. J327D Red Metal Double 830060 $15.75 750011 OXALIC ACID, white powder/crystals, mix $6.00 with water to clean quartz crystals etc. 1 Lb. EPOXY PLASTIC TEMPLATES 750015 OXALIC ACID, white powder/crystals, mix $27.00 COAT with water to clean quartz crystals etc. 5 Lb. MODEL STYLE MLS PART No. Price SULFAMIC ACID, white powder/crystals, $6.00 J345 Frosted Plastic 831010 $5.00 751011 mix with water to clean copper etc., 1 Lb. J346 Frosted Plastic 831020 $5.00 751015 SULFAMIC ACID, white powder/crystals, $27.00 mix with water to clean copper etc., 5 Lb. J347 Frosted Plastic 831030 $5.00 45 MISC. TOOLS, EQUIPMENT & SUPPLIES “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com MLS PART NUMBER EQUIPMENT DESCRIPTION PRICE NEW OVERHEAD WATERING SYSTEM (OWS), Lortone, Convenient free standing 801010 gravity feed water supply for any lapidary grinder $39.50 or other use where a water supply is needed. Includes 1 ½ quart plastic tank, valve, tubing and UNDER WHEEL stand. FOUNTAIN UNDER WHEEL FOUNTAIN (UWF), SUPER DOP Lortone, Plated steel fountain head supplies POT 801020 coolant to diamond wheels. Complete with plastic $34.00 tubing, fountain head and pump. APRON, Vinyl apron with drip edge and 2 OVERHEAD 802010 shoulder straps. $6.50 WATERING SYSTEM WOODEN DOPS, Package of 12 assorted ALCOHOL LAMP DOP WAX 803010 diameters wooden dop sticks, 4" long. $3.75

SUPER DOP POT - By MLS, All metal construction with Ceramic heater, adjustable 803020 temperature, can be used with all types dop $60.00 waxes, 3 compartments. DOP POT - By Kingsley North, Electric dop pot 803025 with Ceramic heater maintains temperature, On- KINGSLEY - DOP POT Off switch all plastic construction wide rim to $35.95 RIKER MOUNTS preheat stones on. ALCOHOL LAMP (AL), Lortone, Glass A-07 alcohol lamp for dopping stones. Faced base CART/GRAM SCALE 803040 makes lamp stable when tipped. Use with $7.50 denatured alcohol. DOP WAX - RED, Low temperature, 1 Lb. 803050 Box, 4 - ¼ Lb. Sticks. For use with heat sensitive $17.90 stones.

803060 DOP WAX - GREEN, Medium temperature, $17.90 1 Lb. Box, 4 - ¼ Lb. Sticks. FILE SET - SMALL

DOP WAX - BLACK, High temperature, HARDNESS TESTER 803070 1 Lb. Box, 4 - ¼ Lb. Sticks. $17.90 KIT CARAT / GRAM SCALE - High 804010 Accuracy, Model A-03, 20 gram X 0.002g or $60.00 100 carat X 0.01 ct. capacity, with test weights, FILE SET - LARGE reads in ct, g, oz, dwt. MOFFATT FLEX CARAT / GRAM SCALE, Model LAMP 804020 A-07, 200 gram X 0.2 or 1,000 carat X 1.0 ct. $26.00 capacity, reads in ct, g, oz, dwt. DIGITAL CALIPER - SMALL, 3 function, 804030 0 to 4" or 0 to 100 mm capacity, inside, outside, $40.00 depth. DIGITAL CALIPER - LARGE, 3 804040 function, 0 to 6" or 0 to 155 mm capacity, inside, $50.00 GOLD & SILVER outside, depth. SEPARATING TEST KIT HAND LENS, 10X Magnification, 1" dia. DIGITAL CALIPER SCREEN SET 804050 Lens, metal and glass construction. $18.00 MLS PART HARDNESS TESTER KIT, Mineralab, NUMBER EQUIPMENT DESCRIPTION PRICE contains 4 double ended hardness test probes, 804060 glass plate, streak plate, magnet and sharpening $84.00 MANUAL SEPARATING SCREEN stone, all in a wooded case. SET, Raytech, Sep of 5 polymer screens and 1 801060 cubic foot tote bin. Screens include ¼", 3/8", ½", $149.90 FILES, Diamond Plated, Small Size, Set of 10, ¾" and 1". One of the handiest tools I have in my 140 mm X 3 mm, basic types of files including 805010 $17.00 shop. flats, round, half round, triangle, etc. Synthetic, 5 ½" X 7 ½" X FILES, Diamond Plated, Large Size, Set of 5, SUPER SPONGE, 801070 2", soaks up lots of water. $4.75 805020 215 mm X 80 mm, basic types of files including $25.00 flats, round, half round, triangle, etc. 16" DRY LAP POLISHING 806010 RIKER MOUNT - 5"W X 6"L X 1"D $8.05 SCREENS, These hard to find 180 mesh silicon carbide impregnated mesh discs are used 806020 RIKER MOUNT - 8" W X 12"L X1"D $12.10 807010 on the “Rockhound Delight” dry lap polisher and $6.00 similar machines and offer one step operation from 806025 RIKER MOUNT - 8"W X 14"L X 1"D $14.75 start to finish with no messy clean-up. Grinds and polishes geodes or slabs with ease. 806030 RIKER MOUNT - 12"W X 16"L X 1"D $18.00 GOLD and SILVER TEST KIT, by MOFFATT FLEXIBLE LAMP (MFL), 808010 Craig. One drop of the proper solution will tell you $36.95 801040 A flexible goose-neck lamp for adding light to your $76.00 if the metal is gold or silver or base metal. Easy to work area. Includes angle mounting bracket, 18" use. Enough reagent for many tests. long flexible neck, 6 foot cord. 46 ROCKHOUND TOOLS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com MLS PART NUMBER EQUIPMENT DESCRIPTION PRICE ROCK PICK - POINTED TIP, Estwing 720010 #E3-14P, 14 Oz., 11" long $39.50 ROCK PICK LONG HANDLE ROCK PICK - POINTED TIP, Estwing ROCK PICK 720020 #E3-22P, 22 Oz., 13" long $40.85 ROCK PICK - POINTED TIP LONG 720030 HANDLE, Estwing #E3-23LP, 23 Oz., $45.30 GEO-PALO PICK 16 ½" long ROCK PICK - POINTED TIP BURPEE PICK NEW 720040 LEATHER GRIP, Estwing #E-30, 22 $49.15 CRACK HAMMER Oz., 12 ½" long ERC-7C CHISEL 721010 ROCK PICK - CHISEL TIP, Estwing $39.10 #E3-12PC, 12 Oz., 10" long ERC-8C CHISEL ROCK PICK - CHISEL TIP, Estwing ERC-9C 721020 #E3-20PC, 20 Oz., 11" long $39.30 GAD PRY BAR CHISEL ROCK PICK - CHISEL TIP, Estwing ERC-12C 721030 #E3-24PC, 24 Oz., 11" long $41.60 CHISEL 722010 CHIPPING HAMMER, Estwing $33.45 #E3-WC, 14 Oz., 11" long TREASURE SCOOP CRACK HAMMER, Estwing # B3- 723010 2LB, 2 Lb., 10 ½” long $36.25 #3 CRACK HAMMER, Estwing # B3- SHEATH 723020 3LB, 3 Lb., 11" long $36.25 (Closed end) NEW CRACK HAMMER, Estwing # B3- 723030 4LB, 4 Lb., 11 ½” long $40.90 #4 ROCK CRACK HAMMER - LONG HANDLE, SHEATH BAG 723040 Estwing # B3-4LBL, 4 Lb., 16" long $42.75 (Open End) COLLAPSIBLE BUCKET GEO-PALO PICK, Estwing #GP-100, 723050 4 Lb., 25" long $80.20 BURPEE PICK, Estwing #BP500, 2 ¼ 723060 Lb., 17" LONG, ALL Steel, vinyl grip $80.20 724010 GAD PRY BAR, Estwing, 1 Lb., 18" L. $47.50 GOLD PAN

725030 CHISEL, Estwing #ERC-7C, 2 3/8" $21.40 “TOP HAT” wide chipping edge by 7" long MAGNET GOLD SLUICE BOX CHISEL, Estwing #ERC-8C, 1 1/8" 725040 wide chipping edge by 8" long $21.65 CHISEL, Estwing #ERC-9C, ¾" MLS PART EQUIPMENT DESCRIPTION PRICE 725050 square tip for splitting a crack by 9" lg. $21.40 NUMBER TREASURE SCOOP, LONG, Same CHISEL, Estwing #ERC-12C, 5/8" 729011 as 36" unit, except 42" long. $47.00 725060 wide chipping edge by 12" long $21.55 GOLD PAN - PLASTIC, Estwing LEATHER SHEATH, Estwing #3, for 701005 #BP-10, 10" dia. $4.90 726010 pointed rock picks $10.50 GOLD PAN - PLASTIC, Estwing LEATHER SHEATH, Estwing #4, for 701010 #BP-12, 12" dia. $6.00 726020 chisel rock picks $11.10 ROCK BAG, by Great South Mineral, 701020 GOLD PAN - PLASTIC, Estwing $8.50 Based on an WWII canvas Army #BP-14, 14" dia. 728015 ammunition bag. Has adjustable $30.00 701030 GOLD PAN - PLASTIC, Estwing $10.30 strap and hard back. Measures 18" H #BP-16, 16" dia. X 10 ½" H X 4" D, several pockets GOLD SLUICE BOX, by Jobe, COLLAPSIBLE CANVAS BUCKET - Sturdy, lightweight aircraft aluminum Heavy duty canvas bucket, 12" Dia. 700010 sluice box with hundreds of mini $109.95 730010 by 14" tall when expanded. (12" by 2" $24.95 riffles. Legs fold under for easy when collapsed), tan and orange in storage or transport, 10" X 36", 7 Lb. color, hard bottom. TOP HAT magnet for GOLD TREASURE SCOOP, by 700020 prospecting. Remove magnetic $10.95 Fundamental Rockhound, all material from pan. 729010 aluminum construction, 36" long, vinyl $44.95 cushion handle. One of the best “ESTWING” TOOLS ARE AMERICAN MADE!!!! rockhounding tools on the market. 47 BOOKS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

Is This an AGATE? By Susan Robinson, 23 pages, Full color - Softcover Susan writes and illustrates this book. It answers that basic question of what a Lake Superior Agate is! It The “AGATE” Books does this by many excellent full color illustrations. In fact Susan’s illustrations are better than most peoples photographs. Copyright 2001. MLS Part #: 900600 Price: $7.95

South Dakota Fairburn Agate THE LAKE SUPERIOR AGATE - 4th Edition By Roger Clark, 80 pages, Colored - Softcover By Scott F. Wolter, 111 pages, Colored - Softcover TOTALLY REVISED/REWRITTEN 2009 This book provides an unequaled view of this highly prized agate and REVISED AND UPDATED. The agate book that started it all!!! More fascinating information for the dedicated rockhound. Over 300 beautiful new pictures added. Several new chapters added. If you have collected colored photos by Mary Jane Clark. Over the last 22 years the author in editions 1 thru 3, you will want this one for your collection. search of new finds, has explored agate hunting areas such as grasslands, badlands and Black Hills. MLS Part #: 900000 Price: $24.95 MLS Part #: 900200 Price: $27.95

The Lake Superior Agate ONE MAN’S JOURNEY The River Runs North By Scott F. Wolter, 180 pages, Colored - Softcover By Tom Harmon, 104 pages, Full color - Softcover The second of Scott’s books on the Lake Superior Agate. This is a must This book provides a history of the MONTANA MOSS read for anyone who has read Scott’s previous book. Includes 62 all- AGATE. How were they formed, where are they new color pictures of amazing specimens, entering tales about the found? Many great pictures of what I feel is one of the “lakers”, Moose Lake days, the ups and downs of picking agates and most beautiful agates in the world. much more. MLS Part #: 900100 Price: $28.95 MLS Part #: 900140 Price: $49.95

AGATES INSIDE OUT The How - To’s of Cabbing and Carving Montana By Karen Bartz, 256 pages, Colored - Softcover Agates and Other Chalcedonys Ever wonder how an agate was formed? Karen covers this topic in great By Tom Harmon, 46 pages, Full color - Softcover detail covering the 3 major formation theories. Great photographs. This Tom’s second book on the Montana Moss Agate. He tells you how to book creates a solid foundation for further agate studies. The book also work this tough to work stone and make exotic carvings and other items covers where agates are found, what they look like when you find them. out of them. Tom is perhaps the top world expert on this type of work. Primary focus is on agates of the U.S. Great colored pictures throughout the book. MLS Part #: 900120 Price: $24.95 MLS Part #: 900160 Price: $29.00

AGATES OF LAKE SUPERIOR By Bob and Dan Lynch, 144 pages, AGATES - TREASURES OF THE EARTH FULL Color - Softcover By Pabian, Jackson, Tandy & Cromartie, 182 pages, Hot off the press, the NEWEST Agate Book. Bob and hardback, FULL color - Softcover Dan have hit another one out of the park. An A 2006 Firefly book. Talks about agate formation, exquisitely detailed book about the Lake Superior what an agate is, where they are found (the many Agate. Fantastic full color photos of some of the best different world locations). Many great colored pictures. agates. MLS Part #: 900130 Price: $19.95 MLS Part #: 900730 Price: $35.00

LAKE SUPERIOR - ROCKS AND MINERALS Amazing Agates By Bob and Dan Lynch, 208 pages, FULL Color - By Wolter and Kollath, 36 pages, Full color - Softcover Softcover Including information on how agates formed, where to Hot off the press, the NEWEST Agate Book. Its all about the rocks in the Lake Superior region. Show find them, how to clean and treat them and how to many samples of rough as well as polished rocks. finish them. Also includes Scotts table of value to Ever wanted to know what a “Floater Agate” is, this grade them. Both illustrations and photos. book will show and tell you. MLS Part #: 900720 Price: $12.95 MLS Part #: 900150 Price: $9.95

Rock Picker’s Guide to Lake Superiors North Lake Superior Agates - Identify AGATES Shore AND Imposters! By Mark Stensaas, 43 pages, Full color - Softcover By Magnuson and Wood, 20 panels, Full color Questions such as “Is this an agate?”, “Where can I On one side beautiful full color pictures of AGATES find agates?” and others are answered in this book. AND IMPOSTERS. The other side common agate Lots of maps and pictures. Hand illustrated by artist features and characteristics. Heavy plastic laminated Rick Kollath. Copyright 2000. both sides, folded for your backpack. MLS Part #: 900500 Price: $9.95 MLS Part #: 900170 Price: $8.95 48 BOOKS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

The “GAZETTEERS” Series Lake Superior Agates Field Guide By Various, Approx 100 pages, Color - Softcover By Dan & Bob Lynch, 160 pages, Full color - Softcover Take a normal sized U.S. road atlas, now make it for Covers identification of different type of Lake Superior only one state at a time. That’s what the “Gazetteer agates, where to find them in the Lake Superior water Atlas” is. Essentially EVERY (paved) and most dirt shed. A great deal of the book covers a description of roads in the state are shown. Shows state and federal the different type of agates. lands, topographic details, recreation sites and GPS MLS Part #: 900180 Price: $12.95 grids. Some other points of interest are also shown.

MLS PART PRICE NUMBER PARTS DESCRIPTION Agate Hunting Made Easy IOWA By Jim Magnuson, 118 pages, Full color - Softcover 901350 $19.95 Covers identification of different type of Lake Superior 901360 MINNESOTA $19.95 Agates, agate imposters, where to find agates and 901370 NORTH DAKOTA $19.95 how to care for agates including sorting, cleaning and treating agates. 901380 SOUTH DAKOTA $19.95 MLS Part #: 900190 Price: $12.95 901390 WISCONSIN $19.95

The Wonder of NORTH AMERICAN Agates NEW Fee Mining & Mineral Adventures in the Eastern By Dan & Bob Lynch, 136 pages, Full color - Softcover U.S. There are more types of agates than Lake Superior By Monaco, 264 pages, B&W - Softcover Agates. This book covers some of the other types Much more than a fee-mining guide, this unique book is a treasure trove found in the North American continent. Over 60 types on interesting things to see and do relating to rocks, minerals, gemstones, crystals, fossils, gold and other wonders of the earth. With of agates are covered. Excellent photographs!!!!! 270 sites listed in 31 eastern states. MLS Part #: 900210 Price: $14.95 MLS Part #: 901400 Price: $15.95

The Storied Agate Fee Mining & Mineral Adventures in the Western By Magnuson & Wood, 143 pages, Full U.S. color - Softcover By Monaco, 240 pages, B&W - Softcover Some of the most well know and most beautiful Lake Revised edition. Informative guide to over 94 collecting locations. Also Superior Agates are covered. Some stories and includes 150 museums, caves, points of interest, fairs and festivals legends are given. Extremely high quality color throughout the western states. Seasons, days and hours of operations are given. pictures. A great coffee table book. MLS Part #: 900220 Price: $17.95 MLS Part #: 901500 Price: $15.95

Treasure Hunter’s Gem & Mineral Guides Series The FAIRBURN Agates of the Black Hills By Kathy Rygle, Approx 170 pages, B&W - Softcover By Magnuson & Wood, 143 pages, Full color - Newly revised, these guides offer state-by-state details Softcover on more than 250 gems and minerals the U.S. has to Subtitled “100 Unique Storied Agates”. A complimentary/sister book to “ offer and affordable “fee-dig” sites where they can be The Storied Agate“. This contains the best of the best Fairburn agates in found. Includes maps and illustrations and B/W photos. extremely high quality color picture. A great coffee table book. Also includes listing of annual “rockhound” events as MLS Part #: 900230 Price: $17.95 well as a listing of museums and showplaces.

MLS PART PRICE NUMBER PARTS DESCRIPTION 901000 NORTHEAST U.S.A. $14.99 COLLECTING 901100 NORTHWEST U.S.A. $14.99 901200 SOUTHEAST U.S.A. $14.99 901300 SOUTHWEST U.S.A. $14.99

COAST TO COAST GEM ATLAS 5th Edition The GPS Guide to Western Gem Trails By Johnson, et. al. 60 pages, Softcover By David Kelty, 239 pages, B&W - Softcover A companion to the “Gold Diggers Atlas”. Shows you Over 1200 sites listed by GPS coordinates in the by maps where gemstones as well as other important western states. Know how you use to get directions to rocks (like agates) have been found around the U.S. a location; “Go down to the big sign on the left, turn (also shows locations of rock shops). I have used this right, go 8 or 10 miles, turn left at the big tree……", book myself it’s not bad. NOT ANY MORE!!! Revised edition. MLS Part #: 901050 Price: $11.50 MLS Part #: 901600 Price: $19.95 49 BOOKS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

GEOLOGY GOLD

Minnesota Underground & the Best of the Black Hills The Weekend Gold Miner By Doris Green, 175 pages, B&W - Softcover By Ryan 80 pages, B&W - Softcover There are caves in Minnesota!!! This book reviews the One of the most popular and inexpensive of the gold major caves and mines in the area. Lots of maps and titles. The author becomes a personal guide to finding pictures. Also covers the topics of sinks and gold and getting it out. disappearing streams. Copyright 2003. MLS Part #: 901900 Price: $18.95 MLS Part #: 902600 Price: $7.95

Geology of the Lake Superior Region Recreational Gold Prospecting for Fun and Profit By Gene LaBerge, 313 pages, B&W - Softcover By Butler, 206 pages, B&W - Softcover A very well written book about why lake Superior is Learn about the basic geologic properties of gold and where it is. I use this book as the basis for lectures I terrain where it is found; become familiar with the give about the geology of the state of Minnesota. This various techniques and equipment used by book tells you why the Lake superior agate is found prospectors; get tips on how to plan a family gold trip. where it is found. MLS Part #: 902200 Price: $22.00 MLS Part #: 902650 Price: $12.95

Minnesota’s Geology Modern Prospecting – How to find, By Ojakangas and Matsch, 252 pages, B&W - claim and sell mineral deposits Softcover By McPherson, 301 pages, B&W, - Softcover Lots of maps, diagrams and photos. This book covers Written in 2003. Tells how to research for existing the Minnesota’s geology in detail!!!! An excellent claims, file a claim, prove a claim and sell a claim. Also the basic tools for prospecting. Very up to date. source of geological information. MLS Part #: 902300 Price: $29.95 MLS Part #: 902675 Price: $14.95

Roadside Geology of Minnesota By Ojakangas, 350 pages, Full Color - Softcover Finally a Roadside book on Minnesota. First of the Roadside books in FULL COLOR. Ojakangas knows his stuff when it comes to Minnesota’s geology. A JEWELRY MAKING great reference book!!! Copyright 2009. MLS Part #: 902350 Price: $26.00

Roadside Geology of Wisconsin Jewelry Craft Made Easy By Dott and Attig, 346 pages, B&W - Softcover By French, 72 pages, B&W. This is the latest installment in the Roadside Geology For those who prefer purchasing finished gemstones books. Covers the state of Wisconsin in the same and mountings; and assembling unique jewelry. complete and detailed manner as the other Roadside Detailed instructions and illustrations cover a wide variety of jewelry and topics. books. Copyright 2004. MLS Part #: 902400 Price: $20.00 MLS Part #: 902710 Price: $5.95

101 American GEO-SITES How to Repair Jewelry By Dickas, 250 pages, Full Color - Softcover By William Phelps, 30 pages, B&W and Colored. After you have busted your buns digging rocks, how The basic procedures to repair jewelry are covered. about visiting 101 sites around the 50 states where Topics include the basic jewelers bench and basic weird and strange Geological phenomena occur, such tools, ring sizing, setting stones, chains, jump rings, as racing rocks, natural bridges, monoliths, slit soldering, stone setting, Indian jewelry and much more. canyons etc. MLS Part #: 902425 Price: $24.00 MLS Part #: 902750 Price: $5.00 50 BOOKS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

Advanced Cabochon Cutting How to make Wire Jewelry - Simple but Elegant By Jack R. Cox, 65 pages, B&W - Softcover By Jenkins & Thrasher, 30 pages, B&W and Colored. - This book is a companion book to "Cabochon Cutting". Softcover This book has instructions for cutting special shapes - One of the “simplest” ways to make jewelry is by the hearts, crosses, teardrops, etc. Many interesting wire wrapping technique. This book covers the basics effects can be produced by combining two or more of wire wrapping and more. gem materials which is also covered. Instructions and many photos. MLS Part #: 902775 Price: $6.00 MLS Part #: 904200 Price: $6.00

The Basics of Bead Stringing The Art of Gem Cutting By Kanan 82 pages, B&W - Softcover By Dake, 96 pages, B&W - Softcover Addresses the most common and popular questions of Teaches how to buy rough stones, cut the gems, choose the right those who would like to begin designing and producing equipment and how to properly use the equipment. Popular guide that gets the reader started on the right path and builds an interest in many their own jewelry. Step by step lessons are given with phases of the hobby of gem cutting. First published in 1969, however it wire techniques, leather and string. still applies to today. MLS Part #: 902900 Price: $9.95 MLS Part #: 904300 Price: $6.95

Wire Wrapping Gematone – Tumbling, Cutting, Drilling and NEW By Chandler & Ritchey, 128 pages, Full Cabochon Making color - Softcover By Magnuson, Carver & Wood, 176 pages, Full color. Learn to create stunning wire jewelry designs, no Techniques to operate tumblers, cutting, face polishing, experience required! Basics including safety, tools, drilling rocks. FANTASTIC colored pictures. Uses materials, metals for wirework. The essential “MODERN” up to date equipment. Written in 2015. techniques are covered step-by-step. MLS Part #: 902950 Price: $22.95 MLS Part #: 904350 Price: $18.95

Opal & Gemstone Jewelry By Downing, 309 pages, Colored photos - Softcover Whether opal, agate, jade or tiger-eye, this book provides step-by-step instructions taking you from rough to finished jewelry. About half of the book is LAPIDARY ARTS about opal, the other half other gemstones. Copyright 2009. MLS Part #: 904400 Price: $29.95

FLINTKNAPPING - Making & Understanding Stone Facet Cutter's Handbook Tools By Edward J. Soukup, 64 pages, B&W - Softcover This book was written for the primary purpose of By John C. Whittaker, 341 pages, B&W - Softcover helping the beginning faceter and those who still Simply put, this is the best book I have ever come upon on the subject of consider themselves in this class. This new addition flint knapping. John reviews many different techniques. He looks at both combines the information from "Elementary Faceting the traditional methods as well as the newer techniques. Instructions" (now out of print) & the 1st edition of "Facet Cutter's Handbook" into one book. MLS Part #: 903700 Price: $27.95 MLS Part #: 904500 Price: $6.00

How To Use Diamond Abrasives To Cut Gemstones By Arthur L. Riggle, 31 pages, B&W - Softcover In this book you will learn how to use diamond machinery, accessories and supplies to cut cabochons and small flat stones. Several methods are covered, so that you may select those that best fit your needs. The METAL WORKING author has extensive experience in the field and has put them together here in this useful guide. MLS Part #: 904000 Price: $6.95

Cabochon Cutting The Complete Metalsmith By Jack R. Cox, 65 pages, B&W - Softcover By Tim McCreight, 198 pages, B&W - Softcover The instructions in this book are mostly for silicon Now revised and expanded, this classic hand-book carbide abrasives and oxide polishes, which because gives fuller coverage to familiar techniques and adds of their low cost, are favored by many gem cutters, many new procedures to its already encyclopedic especially beginners. However, the basic techniques breadth. The straightforward text and instructive, clear presented here are adaptable to diamond abrasives. drawings bring even complex techniques within Instructions with many photos. everyone's reach. MLS Part #: 904100 Price: $6.00 MLS Part #: 904700 Price: $19.95 51 BOOKS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

Practical Casting Simon & Schusters Guide to Gems & Precious By Tim McCreight, 153 pages, B&W - Softcover Stones Explains many aspects of small scale casting with Edited by Kennie Lyman, 384 pages, Full color - Soft clarity and comprehension. Includes hundreds of This guide provides both the connoisseur and the helpful drawings and many shortcuts that will help casual collector with a compact, easy-to-use volume even advanced craftspeople. Instruction in the tradi- describing more than 100 rare varieties of minerals tional lost wax method, also sand casting, direct whose beauty and mystery have possessed our methods like cuttlefish and bronze casting. imaginations from time immemorial. MLS Part #: 904800 Price: $18.95 MLS Part #: 905800 Price: $17.99

Handbook Of Lost Wax & Investment Casting Gem Identification Made Easy By James E.Sopcak, 64 pages, B&W - Softcover By Matlins & Bonanno, 322 pages, Some color photos. How to construct and use equipment to develop Enjoy learning the tools of the gem trade from two patterns, castings, and molds for jewelry and small experts. This book explains in non-technical term and metal parts. This book contains detailed information shows how to identify diamonds and colored gems and and tips on the processes and also includes numerous to separate them from imitations and look-a-likes. The photographs. A very well organized step-by-step book's approach is direct and practical and its style is manual. easy to understand. MLS Part #: 904900 Price: $5.50 MLS Part #: 905900 Price: $38.99

FRED WARD GEM BOOK SERIES ROCKS, MINERALS, All Softcover Popular series focusing on individual gems & their outstanding color. GEMS and FOSSILS Contains history & lore as well as sources and buying tips. Beautiful IDENTIFICATION full color photos throughout. 64 pages in each book, Full color.

MLS PART PRICE NUMBER PARTS DESCRIPTION GOLDEN GUIDES All Softcover 906200 “DIAMONDS” $14.95 Popular identification guides for the student or 906300 “EMERALDS” $14.95 the collector. This trusted series contains accurate, up-to-date information along with 906400 “PEARLS” $14.95 detailed, full color illustrations and maps. Rocks, Gems and Minerals (revised formerly 906500 “RUBIES and SAPPHIRES” $19.95 Rocks & Minerals). Gemstones of the World By Walter Schumann, 282 pages, Full color - MLS PART Hardcover PRICE NUMBER PARTS DESCRIPTION Classic best-seller. All color with 1,500 photos of gems in the rough and in polished states. This book is revised and expanded. Features 905100 “ROCKS, GEMS and MINERALS” $6.95 precious and semiprecious stones. Complete physical properties and characteristics are covered. Schumann offers full coverage of the optical 905200 “FOSSILS” $6.95 features of gems light and color. 905300 ”GEOLOGY” $6.95 MLS Part #: 906700 Price: $24.95

Audubon Guide to North American Rocks and MINNESOTA - ROCKS AND MINERALS Minerals By Chesterman, 850 pages, Color photos By Bob and Dan Lynch, 228 pages, Seven hundred ninety-four color plates are cross FULL Color - Softcover referenced to detailed descriptions of field patterns A must have guide to Minnesota’s rocks and minerals. and rock locations. Excellent and comprehensive Full-colored photos and details make it simple and fun index. Guidelines for collecting procedures, key to to identify your finds. The authors know just what to identification, and a mineralogical glossary. Twice the depict in order to make I.D. a snap. photos & descriptions as other guides. MLS Part #: 905500 Price: $21.95 MLS Part #: 900680 Price: $14.95

Simon & Schusters Guide to Rocks & Minerals By Prinz, Harlow & Peters, 608 pages, Full Color - Soft Handbook of Rocks Minerals and Gemstones A practical field guide. Includes more than 1000 By Schumann, 380 pages, Full Color - Softcover illustrations, 600 in spectacular full color. Concise and easy to use, this guide contains everything that a rock Written for the layman and scientist, with a description and mineral enthusiast needs to know. Recommended of the properties and characteristics of each rock and for serious or amateur collectors. This beautiful guide mineral. Complete with 600 color photos. will prove an invaluable reference. MLS Part #: 905600 Price: $20.00 MLS Part #: 905650 Price: $25.00 52 BOOKS “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

The Rockhound's Handbook Collecting Rocks, Gems and Minerals By James R. Mitchell, 184 pages, B&W - Softcover By Polk, 271 pages, Full Color - Softcover Learn rock & mineral formation, tools, identification, Three guides in one!!! Identification, values and finding minerals in the field, legal aspects, prep& LAPIDARY USES!!!! Quick reference format arranged preservation, cutting & polishing & making jewelry from by category and color of stone. Covers both lapidary your finds. Numerous illustrations & black &white and mineral display materials. Provides values and photos. Color photos highlight over 50 of the most tips for locating, buying and collecting. commonly encountered minerals. MLS Part #: 907300 Price: $19.99 MLS Part #: 907600 Price: $15.95

NEW Collecting Agates and Jaspers of N.A. The Practical Geologist By Polk, 271 pages, FULL COLOR – Softcover By Dixon & Bernor, 160 pages, Color - Softcover A companion book to the one above except it covers in If you want to know something about geology and detail Agates and Jaspers found in North America. don’t have a degree in it, THIS IS THE BOOK FOR Provides current values of many common material. YOU. Goes over the basics of geology, lots of great Good information for identification of your rocks. colored pictures. MLS Part #: 907350 Price: $19.99 MLS Part #: 907350 Price: $16.99

DK Smithsonian Rock and Gem Calendar of Fine Agates and Jaspers By Bonewitz, 360 pages, Full color - Softcover 2017 This stunning 11" x 9" compendium displays every feature of the Earth’s By The Gem Shop, 12 Months, Full Color- Softcover geologic splendor --- from the primeval origins of rocks, gems and fossils The Gem Shop does an OUTSTANDING job to their astonishing modern-day uses and appeal. Striking visual profiles present key info for accurate I.D., practical advice is given on how to cut, producing this HIGH quality calendar. Cover such as polish and display objects; their mythological and legendary significance Lake Superior agates, Plume agates, Willow Creek throughout history is explored. jasper, Geodes, and on and on. EXCELLENT!!!! MLS Part #: 907050 Price: $24.95 MLS Part #: 909000 Price: $11.95

Audubon Guide to North American Fossils By Ida Thompson, 846 pages, Color - Softcover The first all-photographic field guide. Each of the 474 identification pictures is a full-color photograph of a fossil. Sponges, corals, trilobites, shells, teeth, bones, and many other types are represented. Also included TUMBLING are 33 color photographs of fossil-bearing rocks and outcrop formations, plus 15 maps. MLS Part #: 907000 Price: $20.95

Professional Gemstone Tumbling DK Smithsonian Handbook of FOSSILS By Walker and Ward, 320 pages, Color - Softcover By Lortone, 21 pages, B&W - Softcover This book uses the “Photo-Encyclopedic” approach for This is the same book that comes with all Lortone identification of fossils. A full color illustration, showing ROTARY TUMBLERS. Great for beginners. A step- the fossil as a living animal or plant is included. Over by-step guide to ROTARY tumbling of gemstones. 500 fossils covered. MLS Part #: 907500 Price: $22.00 MLS Part #: 907900 Price: $4.50

GEODES Natures Treasures How to Tumble Polish ROCKS into GEMS By Zeitner, 304 pages, Full color - Softcover By E. E. Smith, 102 pages, B&W. A stunning full color exploration of geodes. Written by two of the most This book without doubt is the finest book on tumbling I have ever read!!!! respected authors on rocks, gems, minerals: June Zeitner and Brad Smith covers both rotary and vibratory tumbling. Basically Smith lays the Cross. This extensive look into the fascinating world of geodes from how book out by picking a tumbling topic. He then covers this topic with they are created, where they are mined to the exquisite variety of crystal vibratory tumbling, then on the next page in covers it on rotary tumbling. forms within. MLS Part #: 907250 Price: $19.95 MLS Part #: 907800 Price: $22.20

Turquoise Unearthed - An Illustrated Guide Modern Rock Tumbling By Lowry, 80 pages, Full Color - Softcover By Steve Hart, 96 pages, Full Color - Softcover The definitive resource for turquoise rockhounds and A new book on tumbling, copyright 2008. Covers both serious collectors alike. Get the fascinating history of rotary and vibratory tumbling. Tells of some of the turquoise mining; see beautiful colors and forms that new techniques being used for tumbling as well as make this gemstone like no other. some of the newest abrasives and polishes. MLS Part #: 907400 Price: $12.95 MLS Part #: 908100 Price: $24.95

53 NOTE PAGE “YOUR LAPIDARY MLS Order Toll Free: (888) 612-3444 GENERAL STORE” Minnesota Lapidary Supply Web Site: www.lapidarysupplies.com

54 MINNESOTA LAPIDARY SUPPLY 2016 - 2017 201 N. Rum River Drive DATE: Princeton , MN 55371 MLS Ph: (763) 631-0405 TOLL FREE ORDERS ONLY: (888) 612-3444 MINNESOTA LAPIDARY SUPPLY Fax: (763) 631-0405 CUSTOMER ORDER FORM

DATE: CUSTOMER ID: SHIP: NAME: UPS Mail ADDRESS: Parcel Post Priority C.O.D. Pick-up CITY: STATE: ZIP: PHONE: ( ) ______CREDIT CARD DATA (If Used): METHOD OF PAYMENT: CARD #: Check Money Order EXP. DATE: SECURITY CODE Credit Card COD CARD ADDRESS: ZIP CODE:

MLS Catalog Quantity TOTAL Item PART List Ordered PRODUCT DESCRIPTION NUMBER Price COST 1 2 3 4 5 6 7 8 9 10

SUB TOTAL OF SHIPPING CHARGES INCLUDES INSURANCE: ITEMS ORDERED SUB TOTAL OF ITEMS ORDERED UP TO $49.99 ------$13.50 * SUB TOTAL OF ITEMS ORDERED $50.00 to $199.99 ------$22.00 * Less (Minus) Coupons / Specials SUB TOTAL OF ITEMS ORDERED $200.00 to $399.99 ------$40.00 * SUB TOTAL OF ITEMS ORDERED $400.00 to $699.99 ------$60.00 * SHIPPING CHARGES SUB TOTAL OF ITEMS ORDERED OVER $700.00 ------$75.00 * (Rate shown or by Office on Phone) *Note: Add $1.00 extra shipping charges for each gallon of blade Total of Items Ordered lubricant ordered to cover extra cost of shipping. On quantities of 20 pounds or more of abrasives extra shipping will be added. Minnesota Residents Add 6.875% Sales Tax * EXCEPTIONS: Outside the continental U.S., actual shipping charges will passed through to customer at no mark-up. Any order that cannot UPS C.O.D. Charges be shipped via UPS will be shipped by truck carrier, FREIGHT collect. Add $12.50 (If applicable) * SORRY, NO C.O.D.'s to Alaska, Hawaii, Canada and Mexico. TOTAL We only accept VISA, MASTERCARD and AMOUNT OF DISCOVER CREDIT CARDS!!! ORDER “YOUR LAPIDARY Order Toll Free: (888) 612-3444 MLS Ph/Fax: (763) - 631 - 0405 Minnesota Lapidary Supply GENERAL STORE” Web Site: www.lapidarysupplies.com

X OUR LOCATION

GENERAL HIGHWAY MAP DETAILED PRINCETON CITY MAP HOURS Sun. & Mon. ------Closed Tue. thru Fri. ----- 9:00 am to 5:30 pm (CST) Sat. ------9:00 am to 4:00 pm (CST)

MLS Stamp Minnesota Lapidary Supply 201 N. Rum River Drive Princeton, MN 55371

ASS T CL FIRS

To:

ASS T CL FIRS