International Edition, Rev. E6
Revision History
Rev. No. Released Date Description
Rev.B Beta Apr. 16, 2009 First Release Rev.B0 May 05, 2009 Modified “Symbology Reading Control” - “Code 128/EAN-128 Setting” and “ GS1 DataBar Setting” Added “Appendix” - “Symbology ID Table”. Rev.B1 June 22, 2009 Added “Operation Control” - “Presentation Scanning Mode”.(Rename to “Presentation Control” on Rev.B4) Added “Operation Control”–“Time Delay to Low Power Mode”. Rev.B2 Aug. 21, 2009 Added “Symbology Reading Control” - “Composite Code Setting”, “PDF/Micro PDF417 Setting”, “Codablock F Setting”, Korea Post Code Setting”. Added “Operation Control”–“SmartStand Power Off Timeout”. Added “Condensed DataWizard” -“PDF417/Micro PDF417”, “Codablock F”, “Korea Post Code” Modified “Appendix”–“Symbology ID Table”
Rev.B3 Oct. 16, 2009 Added “Host Interface Selection” - “IBM PS/2, 25-30 series keyboard wedge interface”. Added “Operation Control” - “Presentation Scanning Auto-sense”. Added “Appendix”–“Symbology ID Table”–“Code 128” Rev.B4 Mar.05, 2010 Modified “Symbology Reading Control” - “UPC-A & UPC-E Setting” Renamed “Serial Interface Control”–“Time Out Control” to “Serial Response Time-out”. Renamed “Operation Control”–“Presentation Scanning Mode” to “Presentation Control” Renamed “Operation Control”–“Auto Power Off Duration” to “Light Source On Time”. Renamed “Operation Control”–“ Presentation Scanning Auto-sense” to “Presentation Auto-sense” Modified “Operation Control” - “Good Read Duration” Added “Operation Control” - “ Presentation Sensitivity” Added “Appendix”–“Master Default” System Command Rev. B5 Apr.12, 2010 Modified “Operation Control” - “ Hands Free Time-out” Rev. B6 May 27, 2010 Modified “Serial Interface Control”–“Baud Rate” Rev. B7 Jun 25 , 2010 Modified “Symbology Reading Control” - “UPC-A & UPC-E Setting”
Modified “Operation Control” - "Time Delay to Low Power Mode" Revision History
Rev. No. Released Date Description
Rev. B8 Sep 29 , 2010 Modified “Symbology Reading Control” - “UPC-A & UPC-E Setting” and “EAN Setting” Modified “Keyboard Interface Control”–“Keyboard Layout (Language) Setting” Added “Operation Control” - “Scan Rate Control” and “Good Read Indicator” Rev. B9 Nov 10 , 2010 Modified “Serial Interface Control”–“Baud Rate” Rev. C1 Mar 04, 2011 Modified “Serial Interface Control”–“Baud Rate” Rev. C2 Mar 22, 2011 Modified “Symbology Reading Control” - “Code 39 Setting” Modified “Serial Interface Control”–“Protocol, ACK/NAK Setting”
Rev. C3 Jul 22, 2011 Renamed “Symbology Reading Control” - “ UCC/EAN-128” to “GS1-128” Renamed “Serial Interface Control”–“ ACK/NAK Transmission Indication” to “ACK Indication” Modified “Serial Interface Control”–“ACK Indication” and “Serial response time -out”. Renamed “Condensed DataWizard” - “ UCC/EAN-128” to “GS1-128” Rev. C4 Nov 04, 2011 Modified “Symbology Reading Control” - “ Codabar/ NW-7 Setting ” Rev. C5 Jan 02, 2012 Modified “Wand/Laser Emulation Control”–“ Code 39/Code 128 Emulation” Rev. C6 Mar 05, 2012 Added “Operation Control” - "1D Barcode Forward-reading Indication”,“1D Barcode Backward-reading Indication”, and “1D Barcode Direction Indication Transmission”. Rev. C7 Jul 25, 2012 Added “Host Interface Selection”–“ USB HID Legacy” Modified “Symbology Reading Control” - “Code 128 Setting” Modified “Wand/Laser Emulation Control”–“ Code 39/Code 128 Emulation” Modified “Operation Control” - "Operation Mode Setting”, “Presentation Control” Added “Operation Control” - " LED illumination Control” and “LED Illumination Delay” Rev. D1 Dec. 18, 2012 Support 2D Functions. Rev. D2 Apr. 22. 2013 Modified “Symbology Reading Control” - “ Data Matrix Setting Modified “Operation Control” - “Batch Reading rule example” Rev. D3 Aug. 20, 2013 Modified “Symbology Reading Control” - “Readable Bar Code Setting”
Modified “Appendix” - “Symbology ID Table” Revision History
Rev. No. Released Date Description
Rev. D4 Sep. 06, 2013 Modified “Condensed DataWizard” - “1D Bar Code Symbology” and “2D Bar Code Symbology” Rev. D5 Mar. 06, 2014 Modified “Symbology Reading Control” - “GS1 DataBar Setting Added “Appendix”–“ USB HID Legacy Mode” Quick Set Rev. D6 Feb. 06, 2015 Modified “Symbology Reading Control” - “MaxiCode Setting” Rev. D7 Aug. 17, 2015 Added “Host Interface Selection”–“ USB EFT Terminal Mode” Rev. D8 Dec. 25, 2015 Revised “Revision History” Added “Getting Started” - A670 series scanner Rev. D9 May 31, 2016 Added “Operation Control”–“Buzzer Volume” Rev. D10 Aug. 04, 2016 Added “Symbology ReadingControl” - “Small DM Code Reading” Rev. D11 Oct. 11, 2016 Modified “Operation Control”–“Buzzer Volume” Modified “Operation Control”–“Buzzer Tone Adjust”
Rev. D12 Jan. 23, 2017 Modified “Operation Control”–“Buzzer Tone Adjust” Rev. D13 Mar. 09, 2017 Removed “Operation Control”- “Dollar Sign”; Added “Keyboard Interface Control”- “Dollar Sign Control” Rev. D14 March. 02, 2018 Added new release model “A780” and “A680”. Modified “Symbology Reading Control” - “Readable Symbology Setting”–“Popular 1D” Modified “Getting Familiar with Your FuzzyScan” - A780 and A680 series scanner Rev. D15 Sep. 20, 2018 Added “Operation Control” - “Motion Control” Modified the description of “Symbology Reading Control”–“UPC/EAN Security Level” Added information on Code Pages Modified notes on Unique Barcode Reporting
Revision History
Rev. No. Released Date Description
Rev. D16 Nov. 22, 2018 Improved “Symbology Reading Control” – “Code 128 Setting ISBT” - ISBT Concatenation settings
Rev. D17 March. 21, 2019 Modified “Symbology Reading Control” – “QR Code Setting” – “Auto detect QR Code Inverse Reading” Modified “Operation Control”–“Motion Control”. Redefined “Motion Control” as “Scene Mode”. Rev. E1 Nov. 28, 2019 Added “Serial Port Output” Added “Alt-Code Keyboard” option code in “Keyboard Layout” family code Rev. E2 Mar. 20, 2020 Renamed “Keyboard Layout Setting” - “Alt-Code Keyboard” to “Universal” “Keyboard Interface Control” – “Function Key Emulation”: Renamed option “Enable ASCII 00-31 code as keyboard function code output” to “Enable Keyboard Function Code Table 1 Output” Renamed option “Ctrl-Output” to “Enable Keyboard Function Code Table 2 Output” Added option “Enable Keyboard Function Code Table 3 Output” Modified “Appendix” – “Keyboard Function Control Table”: Renamed column title “Key Function” to “Key Function 1” Renamed column title “Ctrl-Output” to “Key Function 2” Added column “Key Function 3” Rev. E3 May 29, 2020 Modified “Symbology Reading Control” – “Small DM Code Reading” to “Damaged DM Code Reading”. Modified “Operation Control” – “Operation Mode” for F & L Series Added option “Multiple Read Mode” Rev. E4 Aug. 07, 2020 Added new release model “A560” Rev. E5 Aug, 14, 2020 “Symbology Reading Control” – “QR Code Setting” Added function option “QR Code Mirror Images”
Rev. E6 Mar. 18, 2021 “Keyboard Interface Control” – “Keyboard Output”: ” Added option “Linux Unicode Output” “Serial Interface Control” – “Record Suffix”: Added option “User Define”
© Copyright Cino Group © Copyright PC Worth Int’l Co., Ltd
Cino makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of merchantability and fitness for any particular purpose. Cino shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this publication. This publication contains proprietary information that is protected by copyright. All rights are reserved. No part of this publication may be photocopied, reproduced or translated into any language, in any forms, in an electronic retrieval system or otherwise, without prior written permission of Cino.All product information and specifications shown in this document may be changed without prior notice.
Warranty
Cino warrants its products against defects in workmanship and materials from the date of shipment, provided that the product is operated under normal and proper conditions. The warranty provisions and durations are furnished by different warranty programs. The above warranty does not apply to any product which has been (i) misused; (ii) damaged by accident or negligence; (iii) modified or altered by the purchaser or other party; (iv) repaired or tampered by unauthorized representatives; (v) operated or stored beyond the specified operational and environmental parameters; (vi) applied software, accessories or parts are not supplied by Cino; (vii) damaged by circumstances out of Cino’s control, such as, but not limited to, lightning or fluctuation in electrical power. Any defective product must follow the warranty program and RMA procedures to return Cino for inspection.
Regulatory
Part 15 Subpart B KN22, KN24 (KN61000-2,-3,-4,-5,-6,-8,-11) EN55022, EN55024, EN61000-3-2, EN61000-3-3, Class B ITE EN60950-1, EN61000-6-3, EN61000-6-2
CNS13438 LED Eye Safety IEC62471 Exempt group
AS/NZS CISPR 22 Class B Laser Eye Safety IEC60825-1 Class 1
Table of Contents
GETTING STARTED...... 1
Getting Familiar with Your Scanner ...... 1
Connecting to Your Host ...... 3
Using Accessories ...... 4
CONFIGURING YOUR SCANNER ...... 5
Barcode Programming Manual ...... 5
Programming Procedures ...... 6
Host Interface Selection ...... 10
Symbology Reading Control ...... 11
User Defined Symbol ID ...... 11
Symbology ID Transmission ...... 13
Readable Bar Code Setting ...... 14
Code 39/Code 32 Setting ...... 16
Code 39 Setting ...... 17
Codabar/NW-7 Setting ...... 18
UPC-A & UPC-E Setting ...... 19
EAN Setting ...... 22
UCC Coupon Extended Code Setting...... 25
IATA& Interleaved 2 of 5 Setting ...... 26
Code 25 Family Setting ...... 27
Code 11 & Code 93 Setting ...... 28
MSI/Plessey Setting ...... 29
Code 128 Setting ...... 30
GS1-128 Setting ...... 31
UK/Plessey Setting ...... 32
Telepen Setting ...... 33
GS1 DataBar Setting ...... 34
Composite Codes, Codablock F, PDF417/MicroPDF417 Setting ...... 35
Code 16K & Code 49 Setting ...... 36
QR Code Setting ...... 37
Data Matrix Setting ...... 38
MaxiCode Setting ...... 39
Aztec Code Setting ...... 40
Australian Post, US Planet, US Postnet, British Post,& Japan Post Setting ...... 41
Netherlands KIX Code, Intelligent Mail,& Korea Post Code Setting ...... 42
Keyboard Interface Control ...... 43
Keyboard Layout (Language) Setting ...... 43
Record Suffix, Preamble, Postamble, FNC1 Symbol Character Transmission ...... 44
Caps Lock & Caps Lock Release Control ...... 45
Delay Setting ...... 46
Function Key &Key Pad Emulation, Upper/Lower Case Setting, Dollar Sign Control ...... 47
Code Page: Barcode Encoding Format, Keyboard Output ...... 48
Serial Interface Control ...... 51
STX/ETX Control, Record Suffix, Preamble, Postamble, FNC1 Symbol Char. Transmission ...... 51
Serial Interface Control ...... 52
FNC1 Symbol Char. Transmission ...... 52
Delay Setting ...... 53
Protocol, ACK/NAK Setting ...... 54
Response Time-out Setting, Baud Rate, Data Frame ...... 55
Code Page: Barcode Encoding Format, Serial Port Output (A& PA Series Only) ...... 56
Wand/Laser Emulation Control (F & L Series) ...... 58
Output Polarity, Signal State, Narrow/Wide Ratio, Margin & Module Time ...... 58
Operation Control ...... 60
Operation Mode ...... 60
Presentation Control, Scan Rate, Flash Duty, SmartStand Power off Timeout ...... 62
LED Illumination Control, Illumination Delay ...... 63
Laser Aiming Control, 1D Barcode Reading Direction ...... 64
Operation Mode, Presentation & Illumination Control ...... 65
Aiming Control, Delay Aiming Time-out Control, Decode Aiming Control ...... 67
Center Alignment, Unique Barcode Reporting ...... 68
Smart Scene ...... 69
Batch Reading ...... 70
Buzzer Tone Adjust, Power On & Good Read Indicator, Vibrator Control ...... 74
Buzzer Volume ...... 75
Redundancy & 1D Code Inverse Reading ...... 76
Reread Delay & Good Read Delay Control ...... 77
Light Source On Time, Hands Free Time-out ...... 78
Good Read Duration, Time Delay to Low Power Mode ...... 79
Presentation Auto-Sense & Sensitivity ...... 80
Condensed DataWizard ...... 81
Preamble, Postamble, Data Length, Symbol ID Transmission ...... 81
Data Formatter Setting ...... 82
Data Verifier Setting ...... 83
Data Replacer Setting ...... 84
Data Organizer Setting ...... 85
APPENDIX ...... 89
Symbology ID Table ...... 90
Keyboard Function Code Table ...... 92
Code Page – Table of Corresponding Languages ...... 94
Code Page – Unicode Hex Input Setup ...... 95
ASCII Input Shortcut ...... 99
Host Interface Quick Set Commands ...... 100
Operation Mode Quick Set Commands (F & L Series) ...... 101
Operation Mode Quick Set Commands (A Series) ...... 102
Option Codes ...... 103
System Commands ...... 104
FuzzyScan Programming Manual A770 Series is documentation complete at www.cino.com.tw. available The purpose. operation and documen This ou visit please Disinfectant details, more For request. upon series other all for available with of option the equipped Moreover, Vibrator. and Housing are L78 which A770, scanners for available are models and imager linear includes family FuzzyScan productivity. your to unleash applications of range a broad FuzzyScan All FuzzyScan Cino choosing for you Thank Y with Familiar Getting GETTING STARTED
r t provides an easy reference for installation installation for reference easy an provides t
scanners web site or contact yoursupplier. orcontact web site L
series laser imager. The The imager. laser series
deliver world deliver A
series area imager, imager, area series our our Scanner - class performance for for performance class 0 and F780 series series F780 and 0 Bar C Bar Antimicrobial o de Scanner de
Vibrator F
- series series ready ready Getting Started
is .
1
A780 Series A680
Series Trigger Status Indicator Power Indicator
Cable Hole Release Beeper Scan Window
FuzzyScan Programming Manual A560/ Series L780 F790/F780/
F560 Series F560
Getting Started 2
A670
/A660 Trigger Status Indicator Power Indicator
/F680/L680 Series Series /F680/L680
Cable Hole Release Beeper Scan Window
FuzzyScan Programming Manual cable. outthe pull holeto release cable the into clip, paper a of end one straighten please the of cable, the remove port to like would you If interface host. the to it connect cable the into it plug then cable, interface desired your choose Please interfaces. FuzzyScan Host Your to Connecting
scanner spot USB support s
n RS and and then and
scanner scanner - 232 Serial Serial 232
insert it insert Getting Started and and 3
Serial RS232 USB COM & USB HID
FuzzyScan Programming Manual Holder Universal application of variety demand wide a fulfill to using accessories by various workforce your of productivity enhance can You Accessories Using that the of value entire the enhances lens from scanner The
the holder is not applicable applicable not is holder the tls Uiesl odr s eind o soig your storing for designed is Holder Universal stylish
.
when not in use. It serves to protect the the protect to serves It use. in not when - cace o flig Mroe, t artistic its Moreover, falling. or scratched
for
scanner A
series .
scanners. u pes note please But scanner -
design design Getting Started
4
Hand sensitivity. of setting You lighting. can scanner the by In for available and scanning SmartStand. presentation between hand switching of auto the to Thanks scanning. optimized the adjust You can productivity. and comfort user’s maximize to applications S attn i seiial dsge fr hand for designed specifically is martStand
rsnain mode, presentation - held scanning automatically while working with with working while automatically scanning held - free SmartStand free Presentation Sensitivi Presentation
A500 u pes nt ta ti feat this that note please But
in an environment with very dim ambient ambient dim very with environment an in select / F500 - scanner holder to desired position for position desired to holder scanner sense design, the design, sense
the barcode may not be be not may barcode the higher sensitivity level through the the through level sensitivity higher series scanners. series
ty
to increase scanner’s scanner’s increase to scanner
r i not is ure is capable is detect - free ed
FuzzyScan Programming Manual o wn t cag te rgamn fml fr multiple for family programming the change to want you code bar If FuzzyScan. set to code option the and code family desired the open FuzzyScan, You scan page. may the code option the find to menu command set you As Code. l command code bar the incorporates menu command code bar supplemental A the read can You pages. concurrently. the FuzzyScan set and explanation following or facing on printed are flowchart programming special and explanations detailed major with page same the on listed is label command code bar and family programmable Each purpose. programming are Command There System parameters. programming internal FuzzyScan Proprietary designed specially are commands code bar FuzzyScan The Barc CONFIGURING YOUR SCANNER programming family. desired next find to page programming the over turn only need you settings, ode Programming Programming ode
bar code labels which allow you to set the the set to you allow which labels code bar , abels of System Command and Option Option and Command System of abels aiy Code Family
Manual
system commands. The The commands. system
and
pin Code Option
Configur
ing for
Your 5
Scanner The System Command is the highest level bar code code bar level highest immediate perform to FuzzyScan directs which command the is Command System The Command System following the family code selection to set the desired desired the set to family. programming parameterselected the for selection code family the following commands code you setting, most For bar of set a “ by represented is Codes Option The Code Option requirem specific provided more than one hundred already programming families to meet any has FuzzyScan family. desired programming user the select to scanned is Code Family The Code Family mu User code. bar another beepscompletion scanning before operations. the complete to seconds few a take will commands system all that note (M_DEFAULT) configurations preset ( information progra system entering as ( such operations, PROGRAM
, xtn pormig oe ( mode programming exiting ),
0 ents. – 9 ”, “ ”,
must select at least one option code code option one at least select must
SYSLIST A – F ” and finishing selection ( selection finishing and ” ) rcvrn t factory to recovering ,
and so on. Please Please on. so and st wait for the the for wait st mming mode mode mming EXIT ), listing listing ),
FIN ). FuzzyScan Programming Manual Please give careful attention to become familiar with each with familiar become to attention careful give Please programming of kind procedure Each procedures. programming Selection Level Dual or Selection Scan take must options, you Most and programmable flexible and setting. complex more of have ease procedure for programming the take possible families as programming simple as designed are FuzzyScan of procedures programming The next on. the power in configurations not need Youre options. programming all non retains or ASIC memory Memory Flash the unit, the off turn FuzzyScan’s internal Flash Memory ASIC or the in stored are commands code bar the by represented parameters, information about the final desired the select to command code bar the scan you As Procedures Programming procedure. programming - program th program is listed in the following pages for your reference. e FuzzyScan if you want to keep the existing existing the keep to want you if FuzzyScan e Multiple Scans Selection, Cycling Cycling Selection, Scans Multiple . But several programming families families programming several But .
ige Scan Single
selected selected parameters
to complete their their complete to
memory. If you
Selection Configur - volatile volatile ing
Your 6
marked with the matched representing symbol of of symbol representing matched the with be will marked menu programming scans the of selection family multiple level the procedures, dual take or selection, must scan cycling family selection, programming the If Conventions of Programming Menu ofProgramming Conventions are you while prog status existing the know to you for helpful very be will It indications. beeping programming of details the to the understand to Appendix refer in listed also Indications” “Beeping please FuzzyScan, the setting Before the in mark flow their to refer and menu, programming bold the find easily can You table. following Category Programming Scanner Conventions ramming the FuzzyScan. the ramming P.C. ] [ (
)
DS CS MS Selectable Option Code NecessaryOption Code SS Programming Category Factory Default Value
: levelDual : Cycling : Multiple : Single
(P.C.) in bold font listed in the the in listed font bold in (P.C.)
S S S Descriptions can selectioncan can selectioncan cans selection S can selectioncan
charts for details. chartsfor
FuzzyScan Programming Manual Program & End Program
lae oe ht h Fzycn il ae 3 take will FuzzyScan the that note Please may destroy all configured parameters. configured all may destroy or ASIC don’t Memory Flash internal non in parameters store
parameters Memory Flash in ASIC non or FuzzyScan will exit programmingFuzzyScan will mode, all store and - oaie eoy fe yu cn h “ the scan you after memory volatile
turn off the power before the completion beeping. It beeping. completion the before power the off turn and inhibit all non all and inhibit FuzzyScan will enter programming enter FuzzyScan will mode, then issue the completion the beeping. then issue
“ PROGRAM “ - Scan Scan END programming functions. ”
”
- volatile memory,volatile
END - scns to seconds 4
Configur ”. Please Please ”. ing
Your 7
Scanner System List, Group & Master Default &Master Group List, System
revision number to host via selected host interface,
FuzzyScan will list product the information and parameters into factory presetconfigurations, FuzzyScan will recover all programmable the then issue the completion beeping. n issue the completion beeping. “ M_DEFAULT “ SYSLIST Scan Scan
”
”
FuzzyScan Programming Manual
Single scan selection scan Single
Yes One of of One One of of One
“ PROGRAM Selection Repeat Family Option Scan “ Scan Scan Scan END
”
No Codes Codes
”
Select one of desired of one Select mode. programming Enter mode. programming Exit family? programming selec to Want parameter. desired of code option one Select families. programming t another t
Configur
ing
Your 8
Scanner Multiple scansselection Multiple
Yes Several Several One of of One
“ Scan One or One Scan PROGRAM Selection Repeat Family “ Option Scan END Scan Scan No ”
Codes Codes
”
programming families. programming desired of one Select mode. programming Enter Exit programming mode. programming Exit family? programming another select to Want 2. 1.
option code selection. code option “ it If parameters. desired select to codes option several or one Select FIN ’ s necessary, scan necessary, s ” to terminate to
FuzzyScan Programming Manual
Cycling scan selection Cycling
es Ye
O n e o f f o e n O O n e o f f o e n O “ M A R G O R P an n ca S eci n ctio le e S t a e p e R “ i n tio p O ily m a F an ca S an ca S D N E an ca S an ca S “ IN F ”
No Codes e d o C Codes e d o C
” ”
ci slc r o e n o select g yclin C ilies. fam ing m program desired of one elect S ode. m ing m program nter E tpormmigmode. m ing m program it x E ily? fam ing m program another select to ant W . necessary) n (If selectio g cyclin ish in F . n selectio s scan “ as eters param f o esired d es d co n tio p o several ngle g in S ” o r r o “
tple ltip u M
”
Configur
ing
Your 9
Scanner Dual level selection level Dual
es Ye
S e ve ra l l ra ve e S l ra ve e S O n e o f f o e n O ( nd 2 “ M A R G O R P eci n ctio le e S ( t a e p e R an or o e n O n ca S ) 1st “ ily m a F an ca S an ca S i n tio p O n tio p O D N E an ca S an ca S ) No ”
Codes e d o C
Codes e d o C s e d o C
”
lc eea i c es d co n tio p o several elect S ilies. fam ing m program desired of one elect S ode. m ing m program nter E ode. m ing m program it x E ily? fam ing m program another select to ant W 2. 1. eters. param esired d f o
i c eeton. n selectio e d co n tio p o “ it If eters. param esired d f o es d co n tio p o S IN F elect o n e o r several several r o e n o elect ’ s n ecessary, scan ecessary, n s ” t tr nate in term to
FuzzyScan Programming Manual .
A series Family Code Selection Family Code Host Interface Selection Host Interface
doesn PROGRAM ’ t supportt
Wand emulation
, La P.C MS MS MS MS MS MS MS MS MS MS MS MS ser emulation
USB HIDturbo mode USB HID Laser emulation USB EFTTerminal Mode USB HIDLegacy PS/2 (DOS/V) keyboard PS/2 (DOS/V) keyboard wedge turbomode P USB ComPort Emulation Wand Emulation Standard/TTL RS IBM PS/2, 25 S/2 (DOS/V)direct link (keyboard replacement) , USB HID Le USB standard - 30 series keyboard wedge interface Host Interface Selection Interface Host
- 232 peer
mode gacy
Configur wedge standard mode
Mode -
Parameter Selection Parameter to - peer serial .
ing
Your 10
Scanner
Option Code F_ DEFAULT 21 20 19 18 1 14 13 10 09 08 06 02 7
FuzzyScan Programming Manual Family Code Selection Family Code Symbol ID :1character Symbol PROGRAM
P.C DS
Code 16K (default= PDF417/Micro Trioptic Code 39 (default= UPC GS1 DataBar Telepen (default= UK/Plessey (default= MSI/Plessey (default= Code 11 (default= I PostalGerman Code China Postal (default= Code Matrix 2of 5(default= Interleaved 2 of5 (default= Standard/Industrial 2of 5(default= Code 93 (default= Code 39/Code 32 (default= Codabar/NW EAN UPC GS1 Code 128 (default= Maxi Code Data Matrix & QR Micro QR Code Korea Post Code (default= Co Codablock UCC CouponExtended Code E ATA (default= AN de 49 - - - - - 128 (default= 13 (default= 8 (default= E A (default= (default=
( default=
F (
Symbology Reading Control Reading Symbology default= (default=
- ( 7 (default= (default= default= O PDF417 (default= Parameter Selection Parameter User Defined Symbol ID Symbol Defined User N ) E A
F T ) ) P H U ) C
)
) B Q ) ) )
)
d
) c S )
) (default=
K R Y ) (
) X
default= Configur
) ) )
)
D
W ) a
J G ) ) ) L
)
) (default=
M b ) ing ) V
) I
)
Your 11 Z
)
Scanner
Option Code 30 29 28 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
2nd Option Code Option 2nd F_ ( ( (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) (1 character) ( 1 1 1
character) DEFAULT character) character) character)
FuzzyScan Programming Manual Family Code Selection Family Code Symbol ID :1character Symbol
PROGRAM
P.C DS
US Postnet US Planet Netherlands KIX Post Japan Post Intelligent Mail British Post Australian Post Chinese Sensible Aztec Code User Defined Symbol ID Symbol Defined User
( Symbology Reading Control Symbology
default=
( ( (default= (default= default= default=
(USPS 4CB/One Code) (default= Selection Parameter (default=
( default= m k o h e
) ) (default= ) ) )
Configur
g )
f )
l )
ing
Your 12
Scanner
j )
(continued)
Option Code 41 39 38 37 36 34 33 32 31
2nd Option Code Option 2nd F_ ( ( (1 character) (1 character) (1 (1 character) (1 character) (1 character) (1 character) 1 1
DEFAULT character) character) character)
FuzzyScan Programming Manual
Symbology IDTransmissionSymbology Family Code Selection Family Code
PROGRAM
P.C SS SS SS SS SS SS SS
Enable suffix Enable prefix symbologyAIM transmission ID Enable suffix CINOsymbology ID Enable prefix symbologyCINO ID Disable symbology IDtransmission Enable both prefix and suffix Enable both prefix and suffix symbology CINO ID Symbology Reading Control Symbology Symbology ID TransSymbology ID AIM
symbology ID Configur Parameter Selection Parameter AIM
ing transmission
symbology ID transmission transmission
Your 13
Scanner
transmission mission
transmission
Option Code F_ DEFAULT 6 5 4 3 2 1 0
FuzzyScan Programming Manual selection selection “ the you if select But selection. this scan to Remember Auto Readable Symbology Setting Readable Symbology Family Code Selection Family Code ” , FuzzyScan will terminate this this terminate will , FuzzyScan automatically PROGRAM
“ FIN . ”
to terminate to terminate
P.C CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS SS
Chinese Sensible (Han Aztec Code* MaxiCode Data Matrix * Code*/QR Micro QRCode* Korea Post Code Code 49 Code 16K Codablock F PDF417 * /Micro PDF417 IATA GS1 DataBar (RSS Telepen UK/Plessey MSI/Plessey Code 1 Code 93 * Germany China Postal Code Interleaved 2 of5 * Matrix 2of 5 Standard/Industrial 2of 5 Trioptic Code 39 Code 39 * Codabar/NW EAN EAN UPC UPC GS1 Code 128 * Popular 1D Auto - - -
- - 128 8 * 13 * E * A
1 *
Symbology Reading Control Symbology * Postal Code
Readable Bar Code Setting Code Bar Readable
-
7 *
- 14) * Configur
Xin) Code
Parameter Parameter
ing
Your 14
Scanner Selection
Option Code F_ DEFAULT C0 A4 A3 A2 A1 A0 21 20 19 18 17 15 14 13 12 10 09 68 58 48 38 08 47 07 06 05 04 03 02 31 01 00 11
FuzzyScan Programming Manual . . . .
When you set theminimum and maximum length ofeach symbology, please the note data length ofscanned barcodedoesn (RSS "Popular includes 1D" "Code128", "GSA Above symbologies marketed with * areenabled as default. Whenyou select the If your application is known Readable Symbology Setting Readable Symbology Family Code Selection Family Code “ Symbology ID - 14)".
PROGRAM ”
into the transmitted data is also helpfulidentify to the specific symbology.
,
youmay
select known those symbologies only to - 128", "UPC P.C CS CS CS CS CS CS CS
Postnet Planet Code KIX Post Japanese Post Intelligent Mail barcode British Post Australian Post - A", "UPC Readable Bar Code Setting Code Bar Readable
- E", "EAN
Symbology Reading Control Symbology
- 13", "EAN Configur
“ increase the reading speed and decrease the Auto Parameter Selection Parameter ” - , the scanner only reads those symbologies withmarked 8", "Codabar/NW ing
Your 15
Scanner - 7", "Code 39", "Interle
(continued)
possibility of aved 2 of5",93", "Code DataBar "GS1 ’ t include t include start/stop characters.
reading error. readingFurthermore, error. toadd *.
Option F_ DEFAULT B8 B6 B5 B4 B3 B1 B 0
Code
FuzzyScan Programming Manual .
Trioptic Code 39 and Code 39Full ASCII cannot enabled be simultaneously. Family Code Selection Family Code Trioptic Code 39 Family Setting Family Code 39 Code 39 Code 39 Min. Length Min. Code 39 PROGRAM Code 39 Setting
Max. Length Max.
P.C MS MS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Default (98) 01 Default (0 Disable Trioptic Code 39 D Enable check digit transmission Disable check digit transmission Enable MOD43 check digit verification Di Enable Code 32leading A transmission Disable Code 32leading A transmission Enable start/stop symbol transmission Disable Select Code32 ( Select Full Select Sta Enable Code 39 Disable Code 39 this selection automatically. Scan 2 digits from th 98 this selection automatically. Scan 2 digits from theoption code chart in Appendix Enable Trioptic Code 39 Enable Code 39buffering isable Code 39buffering sable MOD - - Maximum Minimum
start/stop symbol transmission 1 ndard Code 39ndard as primary format ) ASCII Code ASCII 39 as primary format Symbology Reading Control Symbology
43 check digit verification Code 39/Code 32 32 Setting 39/Code Code
PARAF,
e option code chart in Appendix Configur
Italian Pharmaceutical) as primary format
Parameter Selection Parameter
ing
Your 16
Scanner
; ;
then FuzzyScan will terminate then FuzzyScan will terminate
Option Code F_ (2 digits) (2 digits) DEFAULT FIN FIN D C E B A 1 0 9 8 7 6 5 4 3 2 1 0
FuzzyScan Programming Manual Level .
The scanner offers 39 SecurityCode Level Level 1 Level 0: Family Code Selection Family Code 2: Code 39 Security Level Security Code 39
3 : :
If you This is the default setting which allows the scanner tooperatefastest, while providing sufficientsecurity in decoding If you are experiencing mis If you are experiencing mis PROGRAM failed poorly to read
Level
four
levels decode of security for
- printed orout read read
of poorly of poorly P.C SS SS SS SS
- - - of printed printed Level 3 Level 2 Level 1 Level 0 - Code39 spec. barcodes in level 2,please or out or serious out
bar codes
Symbology Reading Control Symbology - of - spec. :
- of Code 39 39 Setting Code bar codes Configur - spec. Parameter Selection Parameter bar codes ing
i n level
select levelselect Your 17
2 i n level 1, please selectlevel 0. Scanner , please selectlevel
3 . This is themostThis aggressive settingmay and increase misread. the
1 .
“ in - spec ”
Code39 bar codes. Option Code F_ DEFAULT 3 2 1 0
FuzzyScan Programming Manual Codabar Check Check Codabar Family Code Selection Family Code Codabar Max. Length Max. Codabar Codabar Min. Length Min. Codabar Codabar Setting Codabar PROGRAM
Digit Settings Digit
P.C MS MS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
98 Default (98) 01 Default (04) Disable check digit transmission Enable check digit verification Disable check digit verification Enable abcd/tn*e start/stop symbol Enable ABCD/TN*E start/stop symbol transmission Enable abcd/abcd start/stop symbol transmission Enable ABCD/ABCD start/stop symbol transmission Disable start/stop symbol transmission Select Codabar CXformat Select Codabar CLSIformat Select Codabar ABC format Select Codabar standard format this selection automatically. Scan 2 digits from theoption code chart in Appendix this selection automatically. Scan 2 digits from theoption code chart in Appendix Runes (Modulus 10/weight 2) Weight Modulus11 7 check DR Modulus 10/weight 2 Modulus 11 Modulus Modulus 16 Enable check digit transmission Enable Codabar Disable Codabar - - Minimum Maximum 10/weight 3
Symbology Reading Control Symbology
Codabar/NW
Configur
Parameter Selection Parameter
ing
transmission
Your 18 -
7 Setting
Scanner
; ;
then FuzzyScan will terminate then FuzzyScan will terminate
Option Code F_ (2 (2 digits) DEFAULT digits) FIN FIN D C E B A 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
FuzzyScan Programming Manual . . . .
system, UPC When enable UPC
UPC Lead 1Numeric System UPC UPC Family Code Selection Family Code - - A Standardization E &EAN
(UPC/EAN/CAN) WPC UPC Setting Family
EAN UPC UPC EAN Selection - PROGRAM A check digit transmission. - - - - - 13 8 Expansion E A 8
-
E expansion, the UPC
BasicLength
13 12 8 8
: : Expand the 12 : Expand the To
- E decoded data will beconverted toUPC
P.C read UPC leading with the 1numeric system, you must enable this option.
SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Check Digit Enable UPC“leading 1” portion Disable UPC“leading 1” portion Enable UPC Disable UPC Enable UPC Disable UPC Enable UPCnumeric system Disable UPCnumeric system Enable UPCstandardization Disable UPCstandardization Enable UPC Disable UPC Enable UPC Disable UPC Enable UPC Disable UPC 8 Disable - digit UPC - - - - - digit UPC
1 1 1 1
------Symbology Reading Control Symbology - - - - - E check digit transmission A check digit transmission E expansion E A E and E check digit transmission A check digit transmission E expansion E A - A to 13
UPC Numeric System
8 Disable - - digit ENA digit EAN NC NC - - Configur
- 1 1 A UPC &
Parameter Selection Parameter
-
- - 8 to12
A format and affected by ing 13 with 1 zero insertion.
Your 19 With 2 Addendum - digit UPC
- + 2 + 2 + 2 + 2 E Setting Scanner - digit
- A and 13
With 5 Addendum setting,related suchas UPC - digit EAN + 5 + 5 + 5 + 5 - digit
- 13.
Standardization Enable NC NC + 1 + 1
standardization
Option Code F_ DEFAULT Expansion Enable D C E B A F 9 8 7 6 5 4 3 2 1 0 + 5 + , UPCnumeric
0 0
4
FuzzyScan Programming Manual Family Code Selection Family Code UPC Supplement Setting UPC Supplement Supplement Supplement UPC/EAN
PROGRAM S ecurity ecurity
Scan VotingScan
L evel
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Only available UPC for Level 2 Level 1 Level UPC Family Addenda Separator Off Enable force supplement digitsoutput Disable force supplement digitsoutput Select UPCwith 2/5 supplementdigits Select UPCwith only 5supplement digits Select UPCwith only 2supplement digits Select UPCwithout supplementdigits Level 13 Level 12 Level 11 Level 10 Level 9 Level 8 Level 7 Level 6 Level Level Level Level Level None UPC Family Addenda Separator On
0 5 4 3 2 1
UPC
Symbology Reading Control Symbology - A UPC & - A & EAN Configur Parameter Selection Parameter - 13 ing -
E Setting
Your 20
Scanner
(continued)
Option Code F_ DEFAULT D C B A 9 8 7 6 5 4 3 2 1 0 2 1 0 7 6 5 4 3 2 1 0
FuzzyScan Programming Manual
. .
The
The scanner offers UPC/EAN Security Level low contrast ordamage barcode labels. digits supplement select you when effective is function This digits. supplement without and with symbols UPC/EAN of mix a Level 2: Level 1 Level 0:
Supplement Scan Voting SupplementScan :
If you failed to read This security level may signif experiencingyouare If mis
is the default setting which allows the scanner tooperatefastest, while providing sufficientsecurity in decoding “in
or three UPC
levelsof decode security forUPC/EAN bar codes /EAN
poorly
is the number of times the same UPC/EAN with 2/5 supplement digits has to be decoded before it is it before decoded be to has supplement digits 2/5 with UPC/EAN same the times of number isthe
with 2/5 supplement digits supplement 2/5 with icantly impairthedecoding ability ofthescanner - printed orout read
of poorly of - of - printed - spec. barcodes in level . or out or The
default value is Level 3. When you select higher level, it may impact the reading speed on poorly on speed reading the impact may it level, higher select you When 3. Level is value default - of - spec. bar codes, especially in characters 1, 2, 7, and 7, codes,characters2, bar especially1, in : Configur
1 , please .
ing
select levelselect Your 21
Scanner
2 . This is themostThis aggressive settingmay and increase misread. the
UPC /EAN
with 8 i 8
only 2 supplement digits supplement 2 only n level 1, please select levelselectplease1, 0. level n - spec” UPC/EAN barcodes. transmitted . It is helpful when decoding when helpful is It . , UPC /EAN S
election of this electionthis of
with only 5 5 only with - printed, printed,
FuzzyScan Programming Manual Family Code Selection Family Code Supplement Supplement EAN Supplement Setting EAN Setting PROGRAM
Scan VotingScan
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
EAN Addenda Separator Off Enable force supplement digitsoutput Disable force supplement digitsoutput Select EAN with2/5 Select EAN withonly 5supplement digits Select EAN withonly 2supplement digits Select EAN supplement without digits En Disable ISBN/ISSN Conversion reading check Enable EAN Disable EAN Enable EAN Disable EAN Enable EAN Disable EAN Enable EAN Disable EAN Enable EAN Disable EAN Level 13 Level 12 Level 11 Level 10 Level 9 Level 8 Level 7 Level 6 Level Level Level Level Level None EAN Addenda Separator On able ISBN/ISSN Conversion reading check
5 4 3 2 1
- - - - - Symbology Reading Control Symbology - - - - - 8 check digit transmission 13 check digit transmission 8 expansion 8 13 8 check digit transmission 13 check digit transmission 8 expansion 8 13
supplementdigits Configur
EAN Parameter Selection Parameter
ing
Setting
Your 22
Scanner
Option Code F_ DEFAULT D C B A B A 9 8 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
FuzzyScan Programming Manual .
low contrast ordamage barcode labels. digits supplement select you when effective is function This digits. supplement without and with symbols UPC/EAN of mix The Supplement Scan Voting
or UPC /EAN is the numberis the oftimes the same UPC/EANwith 2/5 supplement digitshas decoded tobe before itis
with 2/5 supplement digits supplement 2/5 with
. The
default value is Level 3. When you select higher level, it may impact the reading speed on poorly on speed reading the impact may it level, higher select you When 3. Level is value default Configur ing
Your 23
Scanner
UPC /EAN
with only 2 supplement digits supplement 2 only transmitted . Itis helpful when decoding a , UPC /EAN
with only 5 5 only with - printed, FuzzyScan Programming Manual . .
supplement digits bar codes starting with specificprefix. TheEAN without supplement digit 2/5supplementoror 2, with onlydigitsyouselectother 5 the andenableIf EAN digits barcod If EAN S The scanner offers UPC/EAN Security Level Level 2: Level 1 Level 0:
you select EAN with only 2, or 5 or 2/5 supplement digits and enable 491 prefix supplement digit output, the scanner will tra will scanner the output, digit supplement prefix 491 enable and digits supplement 2/5 or 5 or 2, only with EAN select you Family Code Selection Family Code EAN UPC/EAN
upplement Control :
If you failed poorly to read This security level may significantly impairthedecoding ability ofthescanner experiencingyouare If mis Supplement Control Supplement PROGRAM es startinges with 491 prefix. TheEAN without supplement digit
is the default setti S ecurity ecurity
three
levelsof decode security forUPC/EAN bar codes
L evel ng which allows the scanner tooperatefastest, while providing sufficientsecurity in decoding “in
- printed orout read
of poorly of P.C SS SS SS SS SS SS SS SS SS SS S S
- Only available UPC for of - Level 2 Level 1 Level Enable 434/439Supplement DigitOutput Enable 414/419Supplement DigitOutput Enable 378/379 Enable 977 Supplement Digit Output Enable 978/979Supplement DigitOutput Enable 491 Supplement Digit Output Enable allspecific prefix supplement digital output Disable allspecific prefix supplement digital output printed - spec. barcodes in level 0
or out or
Symbology Reading Control Symbology - of - Supplement DigitOutput spec. - A & EAN bar codes, especially in characters 1, 2, 7, and 7, codes,characters2, bar especially1, in : Configur will not
1 EAN , please Parameter Selection Parameter except .
- be transmitted. 13 ing
select levelselect Your Setting 491 prefix supplementdigitscanneroutput,the will or5, transmit with2, EAN
24 will
Scanner
be transmitted.
2 .
This is themostThis
aggressive setti 8 i 8 n level 1, please select levelselectplease1, 0. level n - spec” UPC/EAN barcodes. nsmit EAN with 2, or 5 or 2/5 supplement 2/5 or 5 or 2, with EAN nsmit ng andmay increase misread the Option Code F_ DEFAULT 7 6 5 4 3 2 1 0 2 1 0
S
election of this electionthis of
or 2/5or .
FuzzyScan Programming Manual .
Coupon Codes. UPC When UCC CouponExtended Code UCC Coupon Extended Code Extended UCCCoupon Family Code Family Code UCC coupon extended code PROGRAM
- A, EAN Selection
- 13
and EAN
function
- 128 must be enabled scan to all typesofCoupon Codes. P.C
is SS SS enabled,
Enable UCCCoupon ExtendedCode Disable UCCCoupon ExtendedCode
scanner UCC Coupon Extended Code Extended Code UCC Coupon
decodes UPC Symbology Reading Control Symbology Configur - A barcodes starting with digit Parameter Selection Parameter ing
Your 2
5
Scanner
“
5 Setting ” , EAN
- 13 barcode s starting with digit Option Code F_ “ 99 DEFAULT ”
and 1 0
GS1 -
128
FuzzyScan Programming Manual Family Code Selection Family Code Interleaved 2 of 5 Setting of 2 Interleaved
IATA Setting PROGRAM
P.C SS SS SS SS SS SS SS SS SS SS S SS SS SS SS SS SS SS SS SS SS SS S
Validate Validate USS check digit No check character Select S Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 Disable start/stop symbol transmission Enable check digit transmission Disable check digit transmission Enable CPN,Airline and S/N check digitverification Enable CPNchecking digit verification only Enable S/N checking digitverification only Enable check digit automatic verification Di Select variablelength IATA S Enable IATA Disable IATA Enable check digit transmission Disable check digit transmission Enable start/stop symbol transmission elect elect 15 sable check digit verification German PostalGerman Codeas primary format Interleaved 2of 5as primary format
IATA& OPCC check digit - digit fixedlength IATAchecking Symbology Reading Control Symbology
Interleaved 2 of 5 of 5 2 Interleaved
Configur
Parameter Selection Parameter
ing
Your 26
Scanner
Setting
Option Code F_ DEFAULT C B A 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
FuzzyScan Programming Manual .
length w setting, Code25 For Code 25 Code 25 Code 25 Code 25 Family Code Selection Family Code
of
Code 25 will increase Code 25 Setting Code 25 PROGRAM Family Family Family Family
Max. Length Max. e recommend you recommend e Min. Length Min.
the possibilitythe of reading error.
to
P.C select MS MS SS SS SS SS SS SS SS SS SS SS SS SS
only one only 98 Default (98) 01 Default (0 Enable check digit trans Disable check digit transmission Enable check digit verification Disable check digit verification Enable Disable China Postal Code Enable Disable Enable Disable Standard/Industrial5 2of this selection automatically. Scan 2 digits from th this selection automatically. Scan 2 digits from th - - Minimum Maximum
C Matrixof 5 2 Standard Matrixof 5 2 type hina Postal Code
4 )
Symbology Reading Control Symbology
of Code 25 or set or 25 Code of Code 25 Setting 25 FamilyCode /Industrial 2of 5
e option code chart in Appendix e option code chart in Appendix Configur
mission
Parameter Selection Parameter
the ing
maximum
Your
27
Scanner / minimum
; ;
then FuzzyScan will terminate then FuzzyScan will terminate
barcode
length .
To decode alldecode To types of types Option Code F_ (2 digits) (2 digits) Code 25 or to variable variable to or 25 Code DEFAULT FIN FIN 9 8 7 6 5 4 3 2 1 0
FuzzyScan Programming Manual Family Code Family Code Code 93 Max. Length Max. Code 93 Code 11 Max.Length Code 93 Min. Length Min. Code 93 Code 11 Length Min. Code 93 Setting Code 93 Code 11 Setting PROGRAM
Selection
P.C MS MS MS MS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
98 Default (98) 01 Default (0 Enable check digit transmission Disable check digit transmission Enable Code 93 Disable Code 93 98 Default (98) 01 Default (04) Disable check digit transmission Se Select 1 Disable check digit verification Enable Code 11 Disable Code 11 this selection automatically. Scan 2 digits from theoption code chart in Appendix this selection automatically. Scan 2 digits from th this selection automatically. Scan 2 digits from th this selection automatically. Scan 2 digits from th Enable - - - - lect 2 Minimum Maximum Minimum Maximum check - - check digit verification check digit verification 1 ) Symbology Reading Control Symbology Code 11Code Setting 93 &Code
digit transmission
e option code chart in Appendix e option code chart in Appendix e option code chart in Appendix Configur
Parameter Selection Parameter
ing
Your 28
Scanner
; ; ; ;
then FuzzyScan will terminate then FuzzyScan will terminate then FuzzyScan will terminate then FuzzyScan will terminate
Option Code F_ (2 digits) (2 digits) (2 digits) (2 digits) DEFAULT FIN FIN FIN FIN 3 2 1 0 6 5 4 3 2 1 0
FuzzyScan Programming Manual Family Code Selection Family Code MSI/Plessey Max.Length MSI/Plessey MSI/Plessey Min. Length Min. MSI/Plessey MSI/Plessey Setting PROGRAM
P.C MS MS SS SS SS SS SS SS SS SS SS
98 Default (98) 01 Default (04) Disable check digit Select MOD11 Select MOD10 Select MOD10check digit Enable MSI/Pless Disable MSI/Pless this selection automatically. Scan 2 digits from the this selection automatically. Scan 2 digits from th Enable - - Minimum Maximum check digittransmission Symbology Reading Control Symbology
- - 10 check digit 10 check digit e e MSI/Plessey Setting MSI/Plessey y transmission y
e option code chart in Appendix
option code chart in Appendix Configur
Parameter Selection Parameter
ing
Your 29
Scanner
; ;
then FuzzyScan will terminate then FuzzyScan will terminate
Option Code F_ (2 digits) (2 digits) DEFAULT FIN FIN 6 5 4 3 2 1 0
FuzzyScan Programming Manual . .
Level 1 Level 0: The scanner offers 128 SecurityCode Level 128 SettingCode Family Code Selection Family Code Code ISBT Concatenation Auto: The ICCBBA ISBT standards. conform to barcodes or thatdonot barcodes concatenated output single ISBT ISBT Concatenation On ISBT Concatenation On:Thescanner will only decode and output ISBT concatenated barcodes. Thescanner will notdecode or out ISBT Concatenation Off:Thescanner will not output ISBT concatenated barcodes. Code 128 Code 128 :
Code 128 This is the default setting which allows the scanner tooperat If you are experiencing misreadof poor 128 PROGRAM
Security Level Security
Max. Length Max. Min. Length Min.
two
Setting levelsdecode of securityfor
–
Check ISBT table: Thescanner will output only ISBT concatenated barcodes that conform toICCBBA standards. The scanner will
Scanner will decode and output both ISBT concatenated barcodes and single barcodes. ISBT P.C MS MS SS SS SS SS SS SS SS SS SS SS
- printed or 98 Default (98) 01 Default (0 Enable Code 128 Disable Code 128 Level 1 Level 0 this selection automatically. Scan 2 digits from theoption code chart in Appendix this selection automatically. Scan 2 digits from theoption code chart in Appendix ISBT ISBT Concatenation On ISBT Concatenation ISBT Concatenation Code128 - - Minimum Maximum Concatenation Auto
out 1
bar codes )
- of Symbology Reading Control Symbology
- spec. barcode inlevel1,
e
fastest, while providing sufficientsecurity in decoding "in : On Off
Code 128 Code Configur –
Check ISBT table
Parameter Selection Parameter ing
Your 30
please select 0 level Setting
Scanner
; ;
then FuzzyScan will terminate then FuzzyScan will terminate
.
- spec." Code128barcodes
put single ISBT barcodes. Option Code F_ (2 digits) (2 digits) DEFAULT FIN FIN 1 0 5 4 3 2 1 0
.
not
FuzzyScan Programming Manual Family Code Selection Family Code GS1 GS1
GS1 - - 128 Max. Length 128 Max. 128 Min. Length 128 Min. PROGRAM - 128 Setting
P.C MS MS SS SS SS SS
98 Default (98) 01 Default (0 Enable GS1 Disable GS1 this selection automatically. Scan 2 digits from theoption code chart in Appendix this selection automatically Scan 2 digits from theoption code chart in Appendix - - Minimum Maximum 1 ) -
Symbology Reading Control Symbology - 128
128
GS1 Configur .
Parameter Selection Parameter - 128 ing
Your 31
Setting
Scanner
; ;
then FuzzyScan will terminate then FuzzyScan will terminate
Option Code F_ (2 (2 digits) DEFAULT digits) FIN FIN 1 0
FuzzyScan Programming Manual Family Code Selection Family Code UK/Plessey Max. Length Max. UK/Plessey UK/Plessey Min. Length Min. UK/Plessey UK/Plessey Setting UK/Plessey PROGRAM
P.C MS MS SS SS SS SS SS SS SS SS SS SS
this selection automatically. Scan 2 digits from theoption code 98 Default (98) terminate this selection automatically. Scan 2 digits from theoption code chart in Appendix, 01 Default (04) Disable check digit transmission Enable Convert Xto A Disable Convert Xto A Select UK/Plessey CLSI Format Select UK/Plessey Standard Format Enable UK/Plessey Disable UK/Plessey Enable check digit transmission - - Minimum Maximum Symbology Reading Control Symbology
UK/Plessey Setting UK/Plessey - - F Configur
F
Parameter Selection Parameter
ing chart in Appendix, then FuzzyScan will terminate
Your 32
Scanner
and then
FuzzyScan will
Option Code F_ (2 digits) (2 digits) DEFAULT FIN FIN 7 6 5 4 3 2 1 0
FuzzyScan Programming Manual Family Code Selection Family Code TelepenLength Max. Telepen Length Min.
Telepen Setting PROGRAM
P.C MS MS SS SS SS SS SS SS SS SS
this Scan 2 digits from theoption code chart in Appendix, then FuzzyScan will terminate 98 Default (98) this selection automatically. Scan 2 digits from 01 Default (04) Enable check digit transmission Disable check digit transmission Select TelepenFull ASCII mode Select TelepenNumeric mode Enable Telepen Disable Telepen - - Minimum Maximum selection automatically. Symbology Reading Control Symbology
the option chart code inAppendix, thenFuzzyScan will terminate
Telepen Setting Configur
Parameter Selection Parameter
ing
Your 33
Scanner
Option Code F_ (2 digits) (2 digits) DEFAULT FIN FIN 5 4 3 2 1 0
FuzzyScan Programming Manual
.
The scanner GS1 128 Limited Level Level Level Family Code Selection Family Code GS1 DataBar GS1 DataBar GS1 DataBar Limited GS1 DataBar GS1 DataBar 3 2 1 : : :If you
This is the default setting which allows the scanner tooperat If you are experiencing misreadof poor Security Level Security
PROGRAM F560 failed to readpoorly Security Level offers
Max. Min. Min.
Setting three
Length Length
levels ofdecode security for
- printed or out P.C MS MS SS SS SS SS SS SS SS SS SS SS SS
- - printed or out of 74 Default (74) 01 Default (04) Level 3 Level 2 Level 1 Enable Disable Enable Disable Enable Disable in Appendix Only available for this selection automatically. Scan 2 digits from theoption code chart in Appendix Only available for Only available for Only available DataBar GS1 for - spec. barcodes in level 2,please - - Minimum Maximum GS1 DataBar
GS1 DataBar GS1 DataBar GS1 DataBar ( GS1 DataBar L GS1 GS1 - ;
of Symbology Reading Control Symbology
then FuzzyScanthen terminate will this selection automatically. DataBar ( DataBar - spec. barcode in GS1 DataB GS1 DataB F560 scanners. GS1 e
fastest, while providing sufficients E E L Limited RSS xpanded imited RSS xpanded Configur imited
- DataBar Setting
Parameter Selection Parameter - 14 14
ar ar bar codes ) )
Expanded Expanded Limited level ing
selectlevel
Your
34 3 ,
please select level :
Scanner
. Scan 2 digits fromtheoption code chart 1 . This is the most aggressive setting and may increase the misread.
;
then FuzzyScan will terminate ecurity in decoding
2 .
“ in - spec. ”
GS1
128 Option Code
Limited F_ (2 digits) (2 digits) DEFAULT FIN FIN
2 1 0 5 4 3 2 1 0 barcodes
.
FuzzyScan Programming Manual PDF41 Family Code Selection Family Code Composite CodesSetting Composite
Codablock F Setting Codablock F 7 /MicroPDF417 PROGRAM
Setting
P.C SS SS SS SS SS SS SS SS SS SS
Enable MicroPDF417 Disable MicroPDF417 Enable PDF417 Disable PDF417 Enable Disable transmitted when the MicroPDF417 is detected If UPCComposite Mode: UPC transmitted If UPCComposite Mode: UPCnever linked isselected, UP UPC Composite Mode: UPC always linked UPC Co Enable composite codes Disable composite codes Composite Codes, Codablock F Codablock Codes, Composite mposite Mode: UPCnever linked PDF417/MicroPDF417 Setting PDF417/MicroPDF417
whether Symbology Reading Symbology
MicroPDF417 symbol is detected
Configur
Parameter Selection Parameter
always linkedisselected, UPC barcodes areonly ing
Your 35
Scanner
. Control
rnt or not.
C
barcodes are
,
Option Code F_
DEFAULT 3 2 1 0 1 0 3 2 1 0
FuzzyScan Programming Manual Family Code Selection Family Code Code 16K Max. Length Code 16K Max.
Code 16K Min. Length Code 16K Min. Code 49 Max. Length Max. Code 49 Code 49 Min. Length Min. Code 49 Code 16K Setting Code 49 Setting Code 49 PROGRAM
P.C MS MS MS MS SS SS SS SS SS SS SS SS
81 Default ( 01 Default (0 Enable Code 49 Disable Code 49 160 Default ( 01 Default (0 Enable Code 16K Disable Code 16K this selection automatically. Scan this selection automatically. Scan this selection automatically. Scan this selection automa Scan - - - Minimum Maximum Maximum - Minimum 2 3 2 3
digits from th digits from the option code chart in Appendix digits from th from digits th from digits 81 160 1 1 Symbology Reading Control Symbology ) ) ) Code 16K & Code 49 Settin 49 &Code 16K Code )
e option code chart in Appendix e option code chart in Appendix in chart code option e Appendix in chart code option e tically
Configur .
Parameter Selection Parameter ing
Your 36
Scanner
; ; ; ;
then FuzzyScan will terminate then FuzzyScan will terminate then FuzzyScan will terminate will FuzzyScan then terminate will FuzzyScan then
g
Option Code F_ ( ( DEFAULT 2 3 ( ( 2 3
digits) digits) FIN FIN
digits) digits) 1 0 1 0 FIN FIN
FuzzyScan Programming Manual . .
mirrored mirrored QR/Micro QRcodes. However, Auto detect might increase decoding timeunder certain circumstances CodeQR Mirror Images: inversed QRcodes. However, Auto detect might increase decoding time under certain circumstances. Q R Code Inverse Family Code Selection Family Code
QR QR QR Code Code Min. Length Code Min. PROGRAM Code Setting
Max. Length Max.
Reading
When :
W hen
Enabl
Enabled ed , the scanner only readmirrored andQR Micro QRcodes. If P.C MS MS SS SS SS SS , the scanner only read inversed (whiteon black) QRcodes. If
7089 Default ( 01 Default (0 Auto detect QRCodeMirror Images Enable QRCode Disable QRCode MirrorImages Auto detect QRCodeInverse Reading Enable QRCode Inverse Reading Disable QRCode Inverse Reading Enable QRCode Append Disable QRCode Append Enable MicroQR Code Disable MicroQR Code Enable QRCode Disable QR this selection automatically. Scan this selection automatically. Scan - Maximum - Minimum 4 4
digits from th digits from th 7089 1 ) Code Symbology Reading Control Symbology
)
Mirror ImagesMirror
e option code chart in Appendix e option code chart in Appendix QR Code Setting QR Code Configur
Parameter Selection Parameter ( A Series
ing
Your 37
Scanner
)
Auto detect
; ;
then FuzzyScan will terminate then FuzzyScan will terminate Auto Auto detect
.
is selected thescanner can read both normal and
is selected the scanner readboth can normal and Option Code F_ ( ( DEFAULT 4 4
digits) digits) FIN FIN B A 9 8 7 6 5 4 3 2 1 0
FuzzyScan Programming Manual . . .
decrease W Damaged Matrix Data Matrix and inversed Data Matrix hen using 2Dscanner toread damaged Damaged Family Code Selection Family Code Data Matrix Max. Length MatrixData Max. Data Matrix Min. Length MatrixData Min.
. However, Auto detect mightincrease decoding time under certain circumstances Data MatrixData Setting s
DM Code Reading when
PROGRAM Mirror Images: Inverse Data Matrix
DM Code Reading DM the function is enabled
Reading . However, Auto detect might increase decoding time certain under circumstances.
When : :
W
hen
En
Enabled abled .
DataMatrix code P.C MS MS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS , the scanner only read mirrored
, the scanner only readinversed (whiteon black)
Level Level 1 Standard 3116 Default ( 01 Default (0 Auto Detect DataMatrix Images Mirror Enable Data Matrix Images Mirror Disable Data Matrix Images Mirror Auto Detect DataMatrix Inverse Reading Enable Data Matrix Inverse Reading Disa Enable Data Matrix Disable Data Matrix this selection automatically. Scan this selection automatically. Scan - Maximum ble Data Matrix Inverse Reading - Minimum 4 4 2
s digits from the digits from the 3116 , youcan 1 ) Symbology
) enab Data Setting Matrix
option code chart in Appendix option code chart in Appendix
Configur le this function Data Matrix
Parameter Selection Parameter ( A Series ing
Reading Control
Your .
38
. If
to improve the scanner's
Auto detect
Scanner
Data Matrix
)
; ; is selected the scanner canreadboth normal and mirrored then FuzzyScan will terminate t hen FuzzyScan will terminate . If
Auto detect reading
ability. is selected the scanner can read both normal Be aware that t Option Code he scanner’s snappiness F_ ( ( DEFAULT 4 4
digits) digits) FIN FIN 2 1 0 9 8 7 6 5 4 1 0
Data
FuzzyScan Programming Manual
Family Code Selection Family Code MaxiCode Max. Length Max. MaxiCode
MaxiCode Min. Length Min. MaxiCode MaxiCode Setting MaxiCode PROGRAM
P.C MS MS SS SS SS SS
this selection automatically. Scan 150 Default ( this selection automatically. Scan 01 Default (0 Enable MaxiCode Disable MaxiCode - Maximum - Minimum 3 3
digits from theoption code chart in Appendix, then FuzzyScan will terminate digits from the option code chart in Appendix, then FuzzyScan will terminate 150 1 ) ) Symbology Reading Control Symbology
MaxiCode
Configur
Parameter Selection Parameter ( A Series ing
Your 39
Setting Scanner
)
Option Code F_ ( ( DEFAULT 3 3
digits) digits) FIN FIN 1 0
FuzzyScan Programming Manual Family Code Family Code Aztec Code Max. Length Max. Aztec Code Aztec Code Min. Length Min. Aztec Code
Aztec Code Setting Aztec Code PROGRAM
Selection
P.C MS MS SS SS SS SS
Disable Aztec Code this selection automatically. Scan 3832 Default ( this selection automatically. Scan 01 Default (0 Enable Aztec Code - Maximum - 4 4 Minimum
digits from th digits from the option code chart in Appendix 3832 1 ) Symbology Reading Control Symbology
)
Aztec CodeSetting Aztec e option code chart in Appendix
Configur
Parameter Selection Parameter ( A Series ing
Your 40
Scanner
)
; ;
then FuzzyScan will terminate then FuzzyScan will terminate
Option Code F_ ( ( DEFAULT 4 4
digits) digits) FIN FI 1 0
N
FuzzyScan Programming Manual .
Australian Post Setting: Post Australian encoding. Family Code Selection Family Code Australian Post Setting Australian Post
British Post Setting British Post US Postnet Setting US Postnet Japan Post Japan US
PROGRAM Planet Setting Planet
Setting
Auto
- discriminate output option increase the risk of misread because the encoded data format does not specify the Encoding Table u Table Encoding the specify not does format data encoded the because misread of risk the increase option output discriminate
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Enable Japan Post Disable Japan Post Enable Check Digit Transmission Disable Check Digit Transmission Enable British Post Disable BritishPost Enable Disable Check Digit Transmission Enable US Postnet Disable US Postnet Enable Check Digit Transmission Disable Check Digit Transmission Enable US Planet Disable US Planet Auto Alphanumeric Encoding Output (CEncoding Table) Numeric Encoding Output (NEncoding Table) Raw format Output Enable Australian Post Disable Australian Post Australian Post, US Planet, USPostnet, Planet, Post, US Australian - discriminate Output(Combination C& NEncoding Table) British Check Digit Transmission Symbology Reading Control Symbology
Post
Configur
Parameter Selection Parameter , & Japan Setting Post ing
Your 41
Scanner
Option Code F_ DEFAULT 1 0 3 2 1 0 3 2 1 0 3 2 1 0 5 4 3 2 1 0
sed for sed
FuzzyScan Programming Manual Netherlands KIX Code KIX Netherlands Family Code Selection Family Code Korea Post Code Setting Code Korea Post (USPS 4CB/One Code) 4CB/One (USPS
Intelligent Mail Intelligent PROGRAM
Setting
Setting
P.C SS SS SS SS SS SS
Intelligent Mail Intelligent Enable Disable Enable Intelligent Mail Disable Intelligent Mail Enable Netherlands KIX Code Disable Netherlands KIX Code Length fixed in 6 characters Length fixedin6
Symbology Reading Control Symbology Netherlands KIX Code, KIX Netherlands Configur
,
& Parameter Selection Parameter .
Korea
ing
Your 42
Scanner Post Code Setting Code Post
Option Code F_ DEFAULT 1 0 1 0 1 0
FuzzyScan Programming Manual . .
Keyboard Interface Message String : When preamble orpostamble as the to refer Please Family Code Selection Family Code 1 - 15 characters Universal Preamble Keyboard Layout PROGRAM
Keyboard is selected, ASCII 0x20
ASCII/HEX Table ASCII/HEX
function key output, youmust enable “ the Data Length 2
- 4
digits
listed in the Appendix to determine HEX codes for characters, symbols, and functions to be used as pre as used be to functions and symbols, characters, for codes HEX determine to Appendix the in listed
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
1 or Prefix
- 0x7E characters are sent as sequence of alt key plus numeric keypad value. Thisis onlyvalid forWindows OS. Univers Czech (QWERTY) Japan (DOS/V) Iceland (QWERTY) Switzerland Belgium (AZERTY) Denmark (QWERTY) Netherlands (QWERTY) Italy (QWERTY) Spain Norway (QWERTY) Portugal (QWERTY) Sweden/Finland (QWERTY) Spain ( Canadian French (QWERTY) United Kingdom Germany (QWERTZ) France (AZERTY) U 3
SA (QWERTY) characters Symbol Keyboard Layout (Language) Setting (Language) Layout Keyboard (Latin America Spanish al
ID
Keyboard Interface Control Interface Keyboard - Germany (QWERT ,
QWERTY) Function Key Emulation -
UK (QWERTY)
Variable Scanned Data
,
QWERTY) Configur
length
Parameter Selection Parameter
Z
ing
)
Your 43
1 or Suffix Scanner ” feature as listed inpage 3
characters Symbol
ID
1 - 15 characters Postamble 47
first
Record Suffix 1 character a Option Code mble or postamble. or mble F_ DEFAULT
99 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
To set To
FuzzyScan Programming Manual . .
While selecting other the host interfaces, these selections theabove don’tperform functions foryou. “ of function The is transmitted. is provided in Appendix FNC1 SymbolFNC1 Char. Transmit: F Family Code Selection Family Code NC1
Symbol Char Symbol Record Suffix PROGRAM Postamble
Preamble Caps Lock Control Lock Caps
-
Keyboard Function Code Table. When the scanner interface is set to .
Transmi
When this function is enabled andtheFNC1is contained in scanned data, the scanner transmits the FNC1to host. Chartof
t
” and “ and ” P.C MS MS SS SS SS SS SS SS SS SS SS SS Key Pad Emulation Pad Key
Enable Disable 1 None 1 None Maximum 15 Maximum 15 User defined character character) (1 ENTER (Numeric Key Pad) SPACE TAB RETURN None - - 15 characters 15 characters FNC1 Record Suffix, Preamble, Suffix, Record
Keyboard Interface Control Interface Keyboard - - Symbol Character Character Symbol ” are ” character input; scan “FIN” toterminate this selection. character input; scan “FIN” toterminate this selection.
only Configur
available for IBM PC/AT, PS/VP, PS/2 series personal computers and compatible machines. machines. compatible and computers personal series PS/2 PS/VP, PC/AT, IBM for available
Parameter Selection Parameter ing
Your 44
keyboard, thescan codeis converted tocorresponding key function it before Scanner Transmi
Postamble,
ssion
Option Code F_ [00 [00 5, (00 DEFAULT - - 7 7 FIN FIN F F 1 0 4 3 2 1 0 ], [FIN] ], [FIN]
- 7F)
theFNC1
FuzzyScan Programming Manual . .
efr nra dt tasiso. f h Cp Lc sae s n slc “ select on, is state Lock handshaking without changing status the ofCaps Lock switch. Caps the If transmission. data normal perform the check Please interfaces, these selections don’tperform theabove functionsyou. for The function of “ of function The Family Code Selection Family Code Caps Lock Release Control Release Lock Caps Caps Lock Control Lock Caps PROGRAM Caps Lock Control Lock Caps actual
Caps Lock state in use while software ap software while use in state Lock Caps
”
is only P.C SS SS SS SS SS
available for IBM PC/AT, PS/VP, PS/2 series personal computers and compatible machines. While selecting the other host host other the selecting While machines. compatible and computers personal series PS/2 PS/VP, PC/AT, IBM for available
“ Caps Lock On, Caps Off “ Auto Detect (PC/AT, PS/2, Ke “Caps Lock On” State “Caps Lock Off” State Caps &Caps Lock Control Release Lock Caps Lock On, Shift Off
Keyboard Interface Interface Keyboard plication is running. If the Caps Lock state is off, select “ select off, is state Lock Caps the If running. is plication
Configur ” ” as ok On Lock Caps
Parameter Selection Parameter
yboa ing rd Replacement and DOS/V
Your 45
sae Slc “ Select state. ” Scanner Control
uo Detect Auto
Machines only) , uzSa wl prom pca tra special perform will FuzzyScan ”, Caps Lock Off Lock Caps
” state, ” Option Code F_ and DEFAULT then FuzzyScan will will FuzzyScan then 1 0 2 1 0
nsmission
FuzzyScan Programming Manual . . .
Intercharacter Delay Intermessage Delay Interfunction Delay transmission speed is too fast, characters may be skipped; 2) multitasking operation system or host computers i computers host or system operation multitasking 2) skipped; be may characters fast, too is speed transmission aiu ntbo o dstp C ytm rqie ifrn tmn prmtr etns Pes awy ad n eta nt s saf as unit extra one add always Please settings. parameter timing parameters. different require systems PC desktop or notebook various Family Code Selection Family Code Intercharacter Delay Intercharacter Intermessage Delay Intermessage Interfunction Delay Interfunction
PROGRAM
is a
is atime delay between messages output by FuzzyScan. Increasing this will delay helpapplications host process the incoming is a time delaycharacterstimedatabetweenFuzzyScan. outputbyisa twoparametersare These synchronize usedto communication data
time
del
ay
of transmission of P.C MS MS MS SS SS SS
this Scan 2 digits from the 1 None 1 None 1 None this selection automatically. Scan 2 digits from the this selection automatically. Scan 2 digits from theoption code chart in Appendix - - - 99 (x5) msec. 99 (x5) msec. 99 (x5) msec. segment selection automatically. s
in Keyboard Interface Control Interface Keyboard
each
message string
option code chart in Appendix option code chart in Appendix Configur DelaySetting
Parameter Selection Parameter ing
. Your
46
Scanner
; ; ;
then FuzzyScan will terminate then FuzzyScan will terminate then FuzzyScan will terminate
n a network may slow down the keyboard handling; 3) 3) handling; keyboard the down slow may network a n e y agn hn dutn tee two these adjusting when margin ty Option Code F _ data ontime. (2 digits) (2 digits) (2 digits) DEFAULT FIN FIN FIN when : 1) the datathe 1) : when
FuzzyScan Programming Manual .
interfaces, these selections don’tperform theabove functionsyou. for “ of function The Family Code Selection Family Code Function Key Emulation KeyFunction
Dollar Sign Control Dollar Sign Key PadEmulation Upper/Lower Case Upper/Lower PROGRAM Key Pad Emulation Pad Key
” is ” only P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Upper/Lower Case Case Upper/Lower available for IBM PC/AT, PS/VP, PS/2 series personal computers and compatible machines. While selecting the other host other the selecting While machines. compatible and computers personal series PS/2 PS/VP, PC/AT, IBM for available
Dollar sign outputas “£“ Dollar sign outputas “€ Dollar sign outputas “ Dollar sign outputas “$ Lower case (force all charactersoutput as lower case) Upper case (force all charactersoutput as upper case) Inverse case (change all characters output to inverse case) Normal case (neglect the case upper/lower control) Enable numericoutput as key (NumLock pad On) output Disable keyemulation pad Keyboard Function Code Refer toAppendix Enable Keyboard Function Code Table 3Output Enable Keyboard Function Code Table 2Output ( Enable Dollar sign outputas “¢“ Function Key & Function Keyboard Function Code Table 1Output Keyboard Interface Control Interface Keyboard
–
Keyboard Function Code Table ￥ Configur
“
Table Table 3 Parameter Parameter
Setting ing Key Pad Emulation KeyPad is only supported by
Your 47
Scanner , Selection
Dollar SignControl Dollar Ctrl
for details. - Output
A Series PA & Series
)
,
.
Option Code F _ DEFAULT 4 3 2 1 0 3 2 1 0 1 0 2 1 0
FuzzyScan Programming Manual Family Code Selection Family Code Barcode Encoding Format Encoding Barcode PROGRAM
P.C MS
ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 WIN1258 WIN1257 WIN1256 WIN1255 WIN1254 WIN1253 WIN1252 WIN1251 WIN1250 Codepage 874 Codepage 932 Codepage 936 Codepage 949 Codepage 950 UTF8 Code Page: Page: Code
◆ ------13 Latin 7,Baltic 11 Thai 10 Latin 6,Nordic 9 Latin 5, Turkish 8 Hebrew 7 Greek 6 Arabic 5 Cyrillic 4 Latin 4, 3 Latin 3, Southern European 2 Latin 2, Central European 1 Latin 1, Western European
Keyboard Interface Control Interface Keyboard
Northern European Keyboard Output Keyboard Configur Barcode Encoding Format Barcode Encoding
Parameter Selection Parameter
ing
Your 48
Scanner
,
Option Code F_ DEFAULT 29 28 27 26 25 24 23 22 21 20 1e 1d 1b 1a 19 18 17 16 15 14 13 12 11 10 00 1c 1f
FuzzyScan Programming Manual Keyboard Output
MS
Linux Unicode Output ISO 8859 ISO 8859 ISO 8859 WIN1258 Output WIN1257 Output WIN1256 Output WIN1255 Output Codepage 775 Output Codepage 720 Output Codepage 862 Output Codepage 857 Output Codepage 737 Output Codepage 437 Codepage 850 Output Codepage 866 Output Codepage 855 Output Codepage 852 Output WIN1254 Output WIN1253 Output WIN1252 Output WIN1251 Output WIN1250 Output Codepage Codepage 932 Output Codepage 936 Output Codepage 949 Output Codepage 950 WIN Wordpad Unicode Output WIN Notepad Unicode Output MAC Unicode Output - - - 16 15 Latin 9 14 Latin 8,Celtic
874 Output Latin 10, South
Output Output ◆
Configur
- Eastern European
ing
Your 49
Scanner
1d 1b 1a 39 38 37 36 35 34 33 32 31 30 19 18 17 16 15 14 13 12 11 10 03 02 01 00 2b 2a 1c 2c
FuzzyScan Programming Manual . . .
Keyboard Output Keyboard Format Encoding Barcode Corresponding Languages 3) 2) 1) the content’s language. corresponding code page
device is WIN has the required WIN Notepad Un Input Setup required the has device Mac your that Output Device Mac
WordPad set tothe ” .
:
Different languages use different code pages.code languagesdifferent useDifferent Unicode Output Unicode Unicode Hex Input Setup icode Output
: US English inputmethod. Please
If your host is a Mac device Mac a is host your If
of such data : :
2D barcodes 2D Please see
check : If your isaWindows host If can device,you data output the inUnicode formatto Notepad. You mustensure first thatyourWindo :
If your host is a Windows device, yo device, Windows a is host your If your .
Select if the 2Dbarcode UTF8 was Appendix below, “CodePage Unicode Hex Input Setup Input Hex Unicode can be be can system locale ,
and is set totheEnglish US input method.
encoded using different code pages code different using encoded , select “MAC Unicode Output” Unicode “MAC select ,
setting
in Windowsin For your scanneryour For
and -
Table ofCorresponding Languages is u can output the output can u Configur encoded in Unicode configured for configured
and make sure that it also matches this language to properly display the content of contentdisplayproperly the to ing as the scanner’s the as .
Your 50 To properly decode the data the decode properly To Please see Appendix be the 1 the
data in Unicode in data Scanner 6
(UTF - bit input method. Please see Appendix below, “Code Page “Code below, Appendix see Please method. input bit
- output 8).
”
setting (the data will be in Unicode). You must also first ensure first also must You Unicode). in be will data (the setting . format
low, “CodePagelow,
to
a
of a 2D barcode, 2D a of 2D barcode 2D WordP ad. You must first ensure that your Windows your that ensure first must You ad. .
, select the select -
Unicode Hex Input Setup the
scanner
codepage must first be set set be first must
th at correspondsto at -
” Unicode Hex Hex Unicode .
ws device t o the the o FuzzyScan Programming Manual . .
Serial Interface Message String (RS232,USB COM) : Family Code Selection Family Code 1 char STX STX/ETX Control STX/ETX acter
Record Suffix PROGRAM Postamble Preamble
1 - 15 characters Preamble
Data Length 2 - P.C 4 MS MS SS SS S SS SS SS SS SS SS SS SS
digits S
Postamble
STX/ETX Control, Control, STX/ETX
1 None Maximum 15 1 User defined character character) (1 None data frametransmitted via serialinterface. STX/ETX aretwo characters used to indicatestarting the and endingof the total Enable STX/ETX transmission Disable STX/ETX transmission Maximum 15 User defined character character) (1 SPACE (20H) TAB (09H) CRLF LF (0AH) CR (0DH) None - - 15 characters 15 characters
1 or Prefix
(0D0AH) 3
characters Symbol
- - character input; scan “FIN” toterminate this selection. character input; scan “FIN” toterminate this selection.
, FNC1 Symbol Char., FNC1Symbol Transmission Serial Interface Control Interface Serial
ID
Variable Scanned Data Configur Parameter Selection Parameter
Record Suffix, Preamble Suffix, Record length ing
Your 51 1 or
Suffix
Scanner 3
characters Symbol
ID
1
- 15 characters Postamble
,
1 character ETX
Option Code F_ [00 [00 Record Suffix 1 char 6 DEFAULT , (00 - - 7 7 FIN FIN F F 5 4 3 2 1 0 1 0 ], [FIN] ], [FIN] acter
- 7F)
FuzzyScan Programming Manual
F Family Code Selection Family Code NC1
Symbol Char Symbol PROGRAM
.
Transmit
P.C SS SS
scan code is converted tocorresponding key function before it istransmitted the keyboard, to set is interface scanner the the When Table. data, Code Function Keyboard scanned in contained is FNC1 host. the to FNC1 the the transmits scanner and enabled is function this When Enable Disable FNC1 Symbol Char.Symbol FNC1
Serial Interface Control Interface Serial Configur Parameter Selection Parameter ing
Your 52
Chart of the FNC1 is provided in Appendix in provided is FNC1 the of Chart Scanner Transmission
–
Option Code F_ DEFAULT 1 0
FuzzyScan Programming Manual . . .
Intercharacter Delay Intermessage Delay Interfunction Delay parameters. requi systems PC desktop ma or network a notebook in computers various host or system operation multitasking 2) skipped; be may characters fast, too is speed transmission Family Code Selection Family Code
Intercharacter Delay Intercharacter Intermessage Delay Intermessage Interfunction Delay Interfunction
PROGRAM
is atime delay
is atime delay between messages output by FuzzyScan. Increasing this will delay helpapplications host process the incoming is a time delaycharacterstimedatabetweenFuzzyScan. outputbyisa twoparametersare These s usedto
between P.C MS MS MS SS SS SS transmission
e ifrn tmn prmtr etns Pes awy ad n eta nt s saf as unit extra one add always Please settings. parameter timing different re 1 None 1 None 1 None this selection automatically. Scan 2 digits from theoption code chart in Appendix this selection automatically. Scan 2 digits from theoption code chart in Appendix this selection automatically. Scan 2 digits from theoption code chart in Appendix - - - 99 (x5) msec. 99 (x5) msec. 99 (x5) msec.
and reception
Serial Interface Control Interface Serial
of eachsegment ofthe message string. Configur DelaySetting
Parameter Selection Parameter ing
Your 53
Scanner
; ; ;
then FuzzyScan will terminate then FuzzyScan will terminate then FuzzyScan will terminate
ynchronize data communication when : 1) the dataynchronizecommunicationthe data 1) : when y slow down the keyboard handling; 3) 3) handling; keyboard the down slow y e y agn hn dutn tee two these adjusting when margin ty Option Code F _ data ontime. (2 digits) (2 (2 digits) DEFAULT digits) FIN FIN FIN
FuzzyScan Programming Manual . . . .
each data transmission. If the is NAK received,FuzzyScan willre Wh USB doesn COM NAK
Enable: There Disable: There ACK This functionnot available is batch for mode. When you enable this functionin on the data.Ifyou program The 2) Ifthe preset time 1) Afterpreset NAK retry counts is received within the preset serial response time issues an wa and again data same the transmits scanner the received, is NAK a When data. the discard and indication error an issue will the to up host the from response NAK expectsa scannerthe data,transmitting After en the en Family Code Selection Family Code default retry counts are three times. If you program you If times. three are counts retry default Retry Count
Indication: Handshaking Protocol Handshaking NAK Retry Count NAKRetry
ACK/NAK Software Handshaking Software ACK/NAK error indicationerror and discards the dataunder following twoconditions: ACK Indication PROGRAM ’ s a specific LED beeping and indication for this setting. ’ s ’ neither LED nor t support handshaking RTS/CTS protocol
- out is up but “ 255 times
the preset NAK retry counts have beeping indication for this setting. ”
, the scanner can receive P.C SS SS SS SS SS SS SS SS SS SS
option is selected, the FuzzyScan waits for an for waits FuzzyScan the selected, is option
Xon/Xoff (software handshaking) ACK/NAK (software handshaking) RTS/CTS (hardware None (free running mode) Enable ACK Indication Disable ACK Enable Disable 0~ 3 times 255 “ 0 time 0
. times
ACK Time ACK Time
unlimited ”
Protocol , the scanner won scannerthe , - Indication send the data until receiving ACK. n
’ oet h n. t come to the end. Serial Interface Control Interface Serial - - out Indication out Indication
NAKs from thehos handshaking)
Configur
Parameter Selection Parameter , , ACK/NAK - - line mode, the out ’ out. t resend the data to the host when the scanner receives a NAK. The scanner will discard discard will scanner The NAK. a receives scanner the when host the to data the resend t ing
pr
eset
Your 54
t within the
“ SerialTime Response Scanner ACK
’
(acknowledge) or (acknowledge)
- Setting of pre -
range function will be disableautomatically. - set serial response time
- out NAK ” . If the scannerdoesnthe If .
(not acknowledge) from the host computer after computer host the from acknowledge) (not its for either an ACK or NAK. The scanner The NAK. or ACK an either for its - ou t.
’ t get a response, the scanner the response, a get t Option Code F
_ ( DEFAULT 3
digits FIN 3 2 1 0 3 2 1 0
)
FuzzyScan Programming Manual . .
The communication.This option is helpful very When the Family Code Selection Family Code Serial Serial Response Time Response Serial Baud Rate (BPS) RTS/CTS Hardware Handshaking Response Time Data Frame Data PROGRAM
- out
- out is a pre
- defined delay time for FuzzyScan tohandshaking,wait for acknowledgment ornon to ensure thereliability ofdata communication. P.C S SS SS SS SS SS SS SS SS SS SS SS SS SS S SS SS SS
S S option is selected, the
7, Odd,1 8, None, 2 8, Mark, 1 8, Space, 1 8, Even, 1 8, Odd,1 8, None, 1 9600 BPS 19.2K 38.4K BPS 800 200 mseconds None 7, Even, 1 4800 BPS 2 seconds 1 second 500 mseconds mseconds
BPS
Response
Baud Rate Baud RTS Serial Interface Control Interface Serial
(request tosend) and Configur Parameter Selection Parameter
T ing ime , Data Frame
Your 55
- o Scanner 7, Space, 2 7, 7, Odd,2 7, None, 2 7, Mark, 1 7, Space, 1 115.2K BPS 57.6K BPS 10 8 5 seconds 4 7, Mark, 2 1200 BPS 2400 BPS 15 3 ut Setting CTS
seconds seconds seconds Even, 2
seconds seconds
(clear tosend) signals issuedwill be normalbefore data
,
- acknowledgment from the host compute Option Code 7 6 5 4 3 2 1 0 3 2 1 0 5 4 3 2 1 0
F_ DEFAULT
D C E B A B A 9 8 9 8 5 4 9 8 7 6
r
FuzzyScan Programming Manual
Family Code Selection Family Code Barcode Encoding Format Encoding Barcode PROGRAM
P.C MS
ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 ISO 8859 WIN1258 WIN1257 WIN1256 WIN1255 WIN1254 WIN1253 WIN1252 WIN1251 WIN1250 Code page 874 Code page 932 Code Code page 949 Code page 950 UTF8 Code Page: Barcode Encodi Page: Code Serial Port Serial
page 936
------◆ 14 Latin 8,Celtic 13 Latin 7,Baltic 11 Thai 10 Latin 6,Nordic 9 Latin 5, Turkish 8 Hebrew 7 Greek 6 Arabic 5 Cyrillic 4 Latin 4, Northern Euro 3 Latin 3, Southern European 2 Latin 2, Central European 1 Latin 1, Western European
Serial Interface Control Interface Serial
Output Configur
Parameter Selection Parameter
ing pean
(A Your 56
& PA Scanner
Series Only) Series
ng Format,
Option Code F_ DEFAULT 2a 29 28 27 26 25 24 23 22 21 20 1e 1d 1b 1a 19 18 17 16 15 14 13 12 11 10 00 1c 1f
FuzzyScan Programming Manual .
To To get multilingual Serial Port Serial
output
Output
with
the serialthe MS interface
Unicode (Little Endian) Unicode (Big Endian) Raw Data ISO 8859 ISO 8859 CP932 Output (Little Endian) CP936 Output (Little Endian) CP949 Output (Little Endian) CP950 Output (Little Endian) CP775 CP720 CP862 CP857 CP737 CP437 CP850 CP866 CP855 CP852 WIN1258 Output WIN1257 Output WIN1256 Output WIN1255 Output WIN1254 Output WIN1253 Output WIN1252 Output WIN1251 Output WIN1250 Output CP874 Output CP932 Output(Big Endian) CP936 CP949 Output(Big Endian) CP950 Output(Big Endian) UTF8 , please choose correct barcode encoding format and
Output (Big Endian) - - 16 Latin 10, 15 Latin 9 ◆
South
Configur
-
Eastern European ing
Your 57
Scanner
its corresponding serial port output forma 1D 1C 1B 1A 93 92 91 90 39 38 37 36 35 34 33 32 31 30 19 18 17 16 15 14 13 12 11 10 03 02 01 00 2b 2c
t.
FuzzyScan Programming Manual Family Code Family Code Narrow/Wide Ratio
InitialSignalState Output Polarity Output Module TimeModule MarginTime PROGRAM
Selection
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
Narrow/Wide Ratio,
1:3 1:2.5 1:2 Long Medium Short 100 msec Extremely short 50 msec. 30 msec. 25 msec. 20 msec. 15 msec. 10 msec. Low Level (0Vdc) High Level (5Vdc) Low level (0Vdc) onBar (highlevel onSpace) High level onBar (5Vdc) (lowlevel on Space) Time base of minimum narrowbar Delay time before data transmission Determine the initial state of outputvoltage level. Determine the output voltage level forboth barand space.
Wand
Output Polarity, S
.
/Laser /Laser
(F & L Series) L & (F Parameter Selection Parameter Configur Emulation Control Emulation Margin ing
Your 58 ignal State,
Scanner &
Module
Time Option Code F_ DEFAULT 2 1 0 3 2 1 6 0 5 4 3 2 1 0 1 0 1 0
FuzzyScan Programming Manual . .
Code 39 Code Replace Skip 39 Code they will be translated toupper case characters. Anyother characters that arenot availablein Code39 symbologyset will b Code 39 Family Code Selection Family Code
/Code 128 /Code PROGRAM
:
When this option is selected, all scanned data will be translated as Standard Code 39 wand 39 Code Standard as translated be will data scanned all selected, is option this When :
Any character notnormally available in Codestandard the 39symbology
Emulation
P.C SS SS SS SS SS
Enable Full E Enable standard Code39 skip emulation Enable Code 128 Disable standardCode 39emulation nable standard Code39 replace emulation Wand
ASCII CodeASCII 39emulation Code 39/Code 128 Emulation 128 39/Code Code emulation /Laser /Laser Configur (F &L Series) Parameter Selection Parameter
ing Emulation Control Emulation
Your 59
set, will betranslated as
Scanner
/laser
emulation output. If any lower case characters are read, are characters case lower any If output. emulation
Space.
e skipped .
Option Code F_ DEFAULT 4 3 2 1 0
FuzzyScan Programming Manual ......
Presentation Mode (Auto Detection) (Auto Mode Presentation Triggering)(ExternalMode Trigger Low Power Level Mode Diagnostic ( Mode Toggle Force (PulseFlash Mode Driven Reading) Off) Power (Periodic Mode Alternative the triggerthe O Source properly barcode a to similar before scanningthe barcode. regard barcode barcode reading to abarcode, scans yo y ou must press the trigger to trigger the press must ou Family Code Selection Family Code idle Mod Mode (Contin Mode less
state . immediately u You can choose differentlevel of n Time n Operation Mode Operation e
only again of
Mode (Auto Power Off) Power (Auto PROGRAM
when other programmable parameters, such as it Repeat Reading) Repeat
need forces onits . ”
to turn on turn to
is due is (Test Reading) (Test (
Low Power Triggering)
time is up. . Then the Then .
ued Power On) Power ued to press the trigger when it . If the scanner decodes a barcode successfully, it turns off off turns it successfully, barcode a decodes scanner the If .
its light sourcelight automatically and scans
“
sees light source. If light turn on the light source again. source light the on turn :
light source light
When this operation mode is selected, the scanner the selected, is mode operation this When :
: Under
” This operation mode is specifically designed for diagnostic purposes. When this operation mode is selected, is mode operation this When purposes.diagnostic for designed specifically is mode operation This
the barcode. The : :
:
T
: T
T he scanner goes into goesscanner he hescanner detect to light ambient uses mode Presentation :
he once toggle mode toggle T P.C he scanner keeps scanner he “
: Presentation Sensitivity SS SS SS SS SS SS SS SS SS SS scanner always turns always scanner turn
the T .
he scanner goes idleinto state scanningafter thebarcode. You must press the trigger towake upthe scanner for
s scanner detects no barcodes or failsbarcodesscannerno or detects
on automatically to read the barcode. If the light level in the room is not high enough, Presentation Mode may not work not may Mode Presentation enough, high not is room the in level light the If barcode. the read to automatically on Multiple Readmode Level mode Diagnostic mode Toggle mode Force mode Flash mode Alternative mode Presentation Trigger mode Low Power automatically scanner keeps the light source of the scanner keeps on when the trigger is pulled once. With its light source on the scanner read a read scanner the on source light its With once. pulled is trigger the when on keeps scanner the of source light the R eread
standby its After each good read, the read, good each After
mode
D light source on source light
mode
the barcodethe elay flashe
on its on ”
to meetyour
its
, state after scanning the barcode. barcode. scanningthe after state
R
s Operation Control Operation light source edundancy, andsoforth light source light its Operation Operation Configur
light source light . (F &L Series)
Use Parameter Selection Parameter till applicatio the pre the Flash ing on its
continues to have a good read good a have to for continu for
light source immediately. After the scanner turns off turns scanner the After immediately. source light until Your
60 at lowat frequency timer the
Duty Cycle - defined n (Please re
the barcodes. The barcodes. Mode Scanner of
to turn to trigger ous . “
Light Source Light L ight
operation without trigger without operation
to
its is pulled Y fer tothe setting of adjust ou must press the trigger to trigger the press must ou S
withouttrigger
light source light ource during the pre the during
light source is source light
the frequencythe of the blinking. O
again n Time n O n T .
ime on ing ” -
defined is reset. is before
. Ifthe. scanner detectsimage an “ is up is Presentation Sensitivity off ing
until until . After the scanner turns off turns scanner the After .
. it has has it L
It This mode is convenient for high speed high for convenient is mode This ight ’ the scanner detects an image which is is which image an detects scanner the s very convenient because for multiple for because convenient very s turn on the light source of the scanner the of source light the on turn S a good read or read good a ource its
On T On light source, you must press must you source, light Option Code i t s F
light source is force is source light ime _ ” DEFAULT ).
, the scannerthe , a C 8 7 6 5 4 3 2 1 0 pre
whichis its - defined light source light operation.
similar
enters “ Light d
on ,
FuzzyScan Programming Manual .
Multiple Read Mode: Read Multiple barcodes, the scanner will decode each barcode and beep for each good read. You can enable can multiple timesasame in You read. good each for beep and barcode each decode will scanner the barcodes,
.
FuzzyScan model Laser o T he scanner is allowed to decode to allowed is scanner he scann ing session nly have LED .
illumination (without laser aiming line)
multiple barcodes with a single pull of the trigger. When you press and hold and press you When trigger. the of pull single a with barcodes multiple Configur ing
Your 61 in
Flash/ Force/Toggle/Flash/ Diagnostics Mode Scanner Unique Bar Unique
c ode Reporting ode
function to function s .
the trigger to aim at a series of of series a at aim to trigger the
avoid
reading the same code same the reading FuzzyScan Programming Manual . . .
The Control Rate Scan Control Presentation will be off whenthe pre on the move. But this may impactthe to reading distance. hands SmartStand Power Power SmartStand
Family Code Selection Family Code SmartStand, the SmartStand, SmartStand Power SmartStand . scanningmodes are available. You are recommended to use flash mode orforce mode while under insufficient ambient ligh Presentation Control Presentation
Scan Rate Control Rate Scan Flash Duty Cycle FlashDuty The PROGRAM Flash Duty Cycle
: T : scann : he scanner will have better motion tolerance when you select you when tolerance motion better have will scanner he
- When the scanner is placed on placed is scanner the When Of defined
O
f Timeout ing ff Timeout ff
-
type
duration is u
will
is designed to control the flashing frequency ofthe light source.
is a pre a is be be switch P.C SS SS SS SS SS SS SS SS SS SS SS SS p. -
defined P
ed resentation Control, S Control, resentation
10 mins 5 mins 3 mins 4/5 dutycycle 3/4 2/3 dutycycle 1/2 dutycycle Only available FuzzyScan for Lasermodel L Fixed Dynamic Force mode Flash mode Presentation from hand from 680/L780 laser
duration for scanner’ for duration duty cycle S
mart
SmartStand
- held scanning held S
tand, the scanner will scanner the tand, mode
imagers don’t Operation Control Operation
Configur s light source on source light s
to (F &L Series) Parameter Selection Parameter
presentat
support Power Power ing “ Fixed be
Your 62 ion
switch can Rate, Flash Duty Flash Rate, can this ”
scan rate. It rate. scan scanning and the and scanning time when the scanner is scanner the when time Scanner
function o ed ff Timeoutff
from hand from
.
’ s suitable for application which needs higher motion tolerance on on tolerance motion higher needs which application for suitable s
- light source will be will source light held scanning to scanning held
placed on , hands free hands
SmartStand. While the scanner is placed is scanner the While SmartStand. t. forced on automatically. The light source source light The automatically. on forced
scanning automatically. Three Three automatically. scanning Option Code F_ DEFAULT 2 2 1 0 3 2 1 0 1 0 1 0
FuzzyScan Programming Manual .
LED Illumination Control Illumination LED regular ambient light environment. after on turned be will illumination LED the first, line aiming laser the emit will scanner Family Code Selection Family Code LED Illumination LED Illumination Delay
PROGRAM
: Control When you enable you When
P.C SS SS SS SS SS SS SS
“ LED Illumination
always on always
250 ms 200 ms 150 ms 100 ms Intelligent Always on 300 ms “
, the LED illumination will be always on when you press the trigger. When you enable you When trigger. the press you when on always be will illumination LED the , Mode
Operation Control Operation Configur
Parameter Selection Parameter Control (L Series) ing
Your 63 the preset LED illumination delay. Intelligent mode is recommended to be used in used be to recommended is mode Intelligent delay. illumination LED preset the
, Scanner I llumination Delay
Option Code F_ “ DEFAULT intelligent mode intelligent 4 3 2 1 0 1 0
” , the ,
FuzzyScan Programming Manual .
Laser Aiming Control
1D Barcode Backward 1D Barcode 1D Barcode Family Code Selection Family Code
Indication Transmission Indication 1D Barcode Direction 1D Barcode Laser Control Aiming
PROGRAM Indication Indication Forward
: You can disable orenable laser
- reading - reading
P.C MS MS SS SS SS SS SS SS SS SS SS SS
Enable both prefix and suffix Enable suffix Enable prefix Disable User defined character(1 character) “ None User defined character(1 character) “ None Only available for Enable Disable X S ” ” ◆ aiming when you line scan PDF barcode.
◆
1D Barcode 1D Barcode
direction mark direction mark Laser Laser Aiming Control,
L Series. Operation Control Operation Configur (F &L Series) Parameter Selection Parameter
transmission
transmission
direction mark Reading Reading ing
Your 64
Scanner
transmission
Direction
Option Code F_ 2 2 DEFAULT 〔 〔 00 00 3 2 1 0 1 0 1 0 1 0
- - 7F 7F 〕 〕
FuzzyScan Programming Manual . .
Presentation Background Lighting Trigger Mode (External Triggering)(ExternalMode Trigger Low Power before scanningthe barcode. Family Code Selection Family Code
Presentation Control Presentation Illumination Control Illumination Operation Mode Operation Mode PROGRAM
(
Low Power Triggering)
:
T
he scanner goes into goesscanner he P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS : T
he scanner goes idleinto state scanningafter thebarcode. You must press the trigger towake upthe scanner for
LEDs On LEDs Off Enable Disable Force mode Diagnostic reading) mode(Test Toggle mode (Repeat reading) Force mode (Continued poweron) Alternative (Periodic mode poweroff) Presentation mode (Auto detection) Trigger mode (External triggering) Low Presentation Multiple ReadMode Level mode (Auto Power mode (Lowpower triggering) Presentation
standby
mode
power off) state after scanning the barcode. barcode. scanningthe after state
Operation Control Operation Operation Configur
Parameter Selection Parameter & (A Series)
ing
Illumination Control Illumination
Your 65
Mode, Scanner
Y
ou mu ou
st press the trigger to turn on the light source of the scanner the of source light the on turn to trigger the press st
Option Code F_ DEFAULT 0 0 1 1 1 0 8 7 6 5 4 3 2 1 0
operation.
FuzzyScan Programming Manual ......
Multiple Read Mode: Read Multiple Level Reading) (Test Mode Diagnostic ( Mode Toggle (Contin Mode Force Off) Power (Periodic Mode Alternative Detection) (Auto Mode Presentation
session read multiple while function you decoding, barcode precise more For read. good each for beep and barcode each decode will scanner the barcodes, the triggerthe O Source regard barcode barcode reading scans yo y properly barcode a to similar ambient light condition. When ambient the light isdim ordark,enabl Lighting Background Presentation The Operation Operation ou must ou idle
Illumination Control Mode less
. state . You can choose differentlevel of
immediately u n Time n
press the trigger to turn on the light source again. source light the on turn to trigger the press
modes categorized as modes categorized as only again of
(Auto Power Off) Power (Auto
when other programmable parameters, such as Repeat Reading) Repeat
need . ”
to turn on turn to
is due is
time is up. . Then the Then .
ued Power On) Power ued to press the trigger when it T . If the scanner decodes a barcode successfully, it turns off off turns it successfully, barcode a decodes scanner the If . he scanner is allowed is scanner he is only available forhand its
mode is selected. You can enable can You selected. is mode “
sees light source. If light : light source light When this operation mode is selected, the scanner the selected, is mode operation this When : “ “
: Hand Hand Under ” This operation mode is specifically designed for diagnostic for designed specifically is mode operation This
the barcode. The :
: Control:
T - - Presentation mode uses ambient light to detect to light ambient uses mode Presentation : Free Free Mode Held Mode
he once toggle mode toggle T he scanner keeps scanner he “
Presentation Sensitivity scanner turn the .
to decode to s Y scanner detects no barcodes or failsbarcodesscannerno or detects
on automatically to read the barcode. If the light level in the room is not high enough, Presentation Mode may not work not may Mode Presentation enough, high not is room the in level light the If barcode. the read to automatically on u a eal o dsbe rsnain akrud ihig f h scanner the of lighting background presentation disable or enable can ou ” ” - : : Lowpower mod held mode always turns always Presentation mode, Force mode, scanner keeps the light source of the scanner keeps on when the trigger is pulled once. pulled is trigger the when on keeps scanner the of source light the R eread
multiple barcodes with a single pull of the trigger. When you press and hold and press you When trigger. the of pull single a with barcodes multiple
its After each good read, the read, good each After s
. D light source on source light
Unique Bar Unique elay
on its on ”
ing to meetyou e, Triggermode, Alternativemode, Toggle mode, Level mode, Multiple readmode its , R
this ishelpful for light source edundancy, and soforth light source light Configur c ode Reporting ode till r applicatio the pre the ing on its
continues to have a good read good a have to for continu for
light source immediately. After the scanner turns off turns scanner the After immediately. source light until Your
66 timer motion sensing the - defined n (Please refer tothesetting of
the barcodes. The barcodes.
Scanner
of function to function purposes. When this operation mode is selected, is mode operation this When purposes.
to turn to trigger ous . “
Light Source Light Light Source On Time On Source Light
operation without trigger without operation
its is pulled ability
avoid
light source light during the pre the during light source is source light
of the of the
O
again reading the same the reading n Time n scanner. .
on ” -
defined is reset. is before
“ are recommended to recommended are is up is Presentation Sensitivity off
ing
until until under . After the scanner turns off turns scanner the After . With its light source on the scanner read a read scanner the on source light its With
. it has has it L
It This mode is convenient for high speed high for convenient is mode This ight code ’ the scanner detects an image which image an detects scanner the s very convenient because for multiple for because convenient very s
rsnain mode presentation S a good read or read good a ource multiple times in a same a in times multiple
the trigger to aim at a series of of series a at aim to trigger the its
On T On light source, you must you source, light i t enable s
light source is force is source light ime ” ).
, the scanner entersscannerthe , a Center Alignment Center pre codn t the to according its - defined light source light scann
“ press Light d
ing ing on
is ,
FuzzyScan Programming Manual . .
The
the delay time, aiming the 2 After Delay Aim Family Code Selection Family Code
AimingControl Decode Aiming .
seconds of inactivityof seconds Aim The PROGRAM ing ing
Delay Aiming Time Time
Control is only available for triggerisonly mode available for - out Control
light ,
Control the aiming the will will
be on
- out Control
light , but the LED , butthe P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS Aiming Control, Delay Delay Control, Aiming
will be will
is only available fortrigger mode.You can u Enable in Hand Disable in Hand 4 sec 3 sec 2 sec 1.5 sec 1 sec 800 ms 400 ms 200 ms Delay Aim Intelligent Aiming Regular Aiming Enable Disable shut off. shut .
illumination In . . .
IntelligentAiming
.
in Hand
in Hand
Delay Aim Delay ing
Control Control
Decode Aiming won’t - - - - Free modeFree Held mode remd modeFree Held mode ing
Operation Control Operation be
, Configur Control allows a delay time for the operator to aim the scanner before the before scanner the aim to operator the for time delay a allows Control turn the aimingthe Parameter Selection Parameter
ed (A Series)
o n until the delay time is ing Aiming
light is turned on lightisturned
Your 67
Scanner
se Control
Delay Aiming Time
Time
whenpullthescannertrigger activates A islifted. decod
up -
out .
Control, Control, - out Control to set the delay time Option Code F_ DEFAULT image .
3 2 1 0 7 6 5 4 3 2 1 0 2 1 0
is taken. During taken. is
ing
process
. FuzzyScan Programming Manual .
Unique Bar Unique cycle key trigger Family Code Selection Family Code Unique Barc Unique . . For
Center Alignment
Multiple Read mode PROGRAM c is Center Center Alignment: ode Reporting: ode
pressed and held without release). This prevents the output of repeat data in case a barcode is accidentally read multiple ti multiple read accidentally is barcode a case in data repeat of output the prevents This release). without held and pressed ode Reporting ode
When this function is enabled, is function this When
only. When
this function is P.C SS SS SS SS SS SS
Center Center Alignment Enable Disable Enable in Hand Disable Enable in Hand Disable in Hand
enabled, the scannerenabled, only decodes barcode
in Hand the scanner will only output data from each barcode once during a scanning cycle ( cycle scanning a during once barcode each from data output only will scanner the - - - - Held Mode free Mode Held Mode Free ModeFree Operation Control Operation Configur
Parameter Selection Parameter (A Series) , Unique Ba , Unique ing
Your 68
Scanner
(s)around r
c
ode Reporting
aim ing line.
mes
Option Code the during the same scanning same the during F_
time duration when the the when duration time DEFAULT 1 0 3 2 1 0
FuzzyScan Programming Manual .
...... Smart Scene
Scene 7: Scene 6: Scene 5: especiallywith thoselarge LCDor withlow brightness. 4: Scene Scene 3: Scene 2: Scene 1: Family Code Selection Family Code
Smart Scene
An application This setting is retailfor general applications. The scanner is optimized for scanninghigh This is the default setting. It An application An application PROGRAM nte stig lo optimized also setting Another
optimize s scannerthe
- - -
specific mode optimizes thescanner for specific mode optimizes the specific mode optimizes thescanner forscanning low PC
’ s motion tolerance, optimizes P.C SS S S SS SS SS SS
for general retail applications, as well as the performance when scanning barcodes displayed on the screens of devices, devices, of screens the on displayed barcodes scanning when performance the as well as applications, retail general for S S
the the S S S S S S S cene cene cene cene cene cene cene scanner’s - scanner density barcodes.
scanning 2
7 6 5 4 3 1
for motion tolerance, scanning speed scanning and
speed and scanning scanning Operation Control Operation
Configur
barcodes fromthemobile devicescreens. barcodes onc Smart scanning sensitivity Parameter Selection Parameter (A Series) ing S (printcontrast) barcodes onc
Your 69 Scene ircuit board
Scanner
in differentin environments.
s with
sufficient sensitiv ircuit board
ambient light.
ity most in working environments.
s.
Option Code F_ DEFAULT 6 5 4 3 2 1 0
FuzzyScan Programming Manual
.
Batch Reading - - - - Batch Reading Rule - - - according presetto the sequence which is defined in “Batch Reading Rule” regardless the scanned ofthose order barcodes. codes bar all if only indication
Family Code Selection Family Code Bat Where: [Cino ID Hex value] [Code length] [Character match(es)] Element structure: Where [n] [Element 1] FF [Element 2] FF [Element 3] …[ElementFF n] FF Batch ReadingRule Syntax: When you scan the“None”, preset Batch Reading Rulewill becancelled. Note: Scan the 5. 4. 3. 2. 1. To set the Batch Reading rule Batch Reading
Scan the Use the Scan the Scan the Scan the
ch Reading [Cino ID Hex value] Code from value hex ID Cino find Please Length: 2byte Note: 99 is the universal number, indicatingsymbologies. all
Batch Reading Batch n
PROGRAM is the number ofelements in the overall rule. The number ofelements isupto 16. . Option Code
: When thisfunctionis enabled, canyou scan multiple by barcodes continuously one one upon onetriggerevent. END FIN Batch Reading PROGRAM
function is
is is not available when ABORT and
symbol.
symbol tosave Batchyour Reading rule. :
symbol.
to define the preset Batch Reading rule. only set
symbol (Family Code).
END
by the by available
symbol toexitwithout saving any Batch Reading rulesetting. Multiple Read Mode “ Batch ReadingBatch P.C Trigger Trigger Mode SS Symbology ID Table ID Symbology
Batch Reading rule input None
R . ule
” are read. Otherwise, the scanner reports an error beep and indication. The scanned data will be transmitted be will scanneddata The indication. and beep error an reports scanner the Otherwise, read. are ”
or
Center Alignment in
appendix Operation Control Operation
Configur Batch Reading Batch
(
. 01 Parameter Selection Parameter L (A Series) - ocate the Hex value for th for value Hex the ocate 16 rules ing
is turnedon.
Your 70 )
Scanner FF
indicates the
e
symbology and scan and symbology e nd of one nd ofelement.
The scanner agoodThe beep reports read and
the 2 digit h digit 2 the Option Code ex values from the from values ex F_ [Rules] [FIN] DEFAULT [FIN]
Option
FuzzyScan Programming Manual -
Code 128 In this example,you arescanning Code 39, Code 128, and Code 93bar codes, but you Batch Reading rule example
[Character match Note: [Code length] String st the from counted are which characters 4 to up match Youcan characters. ASCII the represents that combination alphanumeric to refer can You Length: 2 programmed Preamble, Postamble, Scanned Length, Data Prefix/Suffix Symbol ID Length: 4byte Note: Specify whatlength of data will output beacceptable forthis symbology. When
4 .
0 characters is entered as 00
When setting the matched character(s), you must match the content of the whole Data String, including the programmed Preamble programmed the including String, Data whole the of content the match must you character(s), matched the setting When - Data Length, Prefix/Suffi
- Code 39 8 byte
E/SI Rfrne Table Reference HEX/ASCII ] -
Code 93
x Symbol IDOR Symbol AIM ID if you had defined. 4 0 ; 9999 isuniversal a number, indicating alllengths. to
id h Hx au ta rpeet te hrce() o wn t mth Ue the Use match. to want you character(s) the represents that value Hex the find Configur A C B
ing - FF - - CODE128 CODE39 CODE93
you is the universal cha Your 71 or
calculat
Scanner would like tooutput the data in following sequence: AIM ID
e
. the length, youthe must Scan
racter, indicating allcharacters.
the fourdigit data length fromthe consider thewholed
art character of the whole the of character art Option Code ata pin Code Option
s tring , Postamble, Sca Postamble, ,
which includewhich .
o cn the scan to nned s D
ata the the FuzzyScan Programming Manual You would set the up Batch Reading rule with the following command line: Su the enable you example’sIf length. length. the of part as defined had D you Scanned if Postamble, ID Preamble, AIM programmed OR ID the Symbol count to have would you lengths, specific using example previous the program To T [PROGRAM] [Batch Reading] [0301999941FF07999942FF09999943FF] [FIN] [END] Y [PROGRAM] [Batch Reading] [0301001041FF070009FF09000943FF] [FIN] [END] ou would set the up Batch Reading rule with the following command line: he breakdown of the command line is shownbelow: FF 43 9999 09 FF 42 9999 07 FF 41 9999 01 03
End of third code S Code length that must match forCode 93, 9999 = all lengths Code identifier ofCode 93 End of second code S Code length that must match forCo Code identifier ofCode 39 End of first code Start character match forCode 128, 41h =“A” Code length that must match forCode 128, 9999 =all lengths Code identifier ofCode 128 The number ofelements in the tart character match forCode 93, 43h = tart character that must match forCode 39, 42h =
overall rule
de 39, 9999 = all lengthsde 39,9999= “
C ”
Configur
“ B
” ing
Your 72
Scanner ffix Symbol ID of symbology, you would add one character to the previous the to character one add would you symbology, of ID Symbol ffix
ata Length, Prefix/Suffix Length, ata FuzzyScan Programming Manual -
Structure of Note: If the [Character match The breakdown of (RS232/USB COM (RS232/USB FF 43 0009 09 FF 0009 07 FF 41 0010 01 03 interface) 1 character
STX
Data String
the command line is shownbelow: 1 -
Preamble 15 characters 15 Code identifier ofCode 128 The number ofelements in the overall rule End of third code S C C Code identifier ofCode 93 Also indicate endof second Universal matched character, indicating allcharacter B C Code identifier ofCode 39 End of first code Start character match forCode A C tart character match forCode 93, 43h = - - - ode length that must match forCode 93 ode length that must match forCode 39 ode length that must match forCode 128 CODE39 sample length (8)plus Suffix (1) Symbol ID =9 CODE128 sample length (9)plus Suffix =10 SymbolID(1) CODE93 sample length (8)plus Suffix (1) Symbol ID =9
(es)] is set
Scanned Data Data Scanned
Length
2 to “FF”, theto “FF”, following which “FF” indicatedthe end of the code was not need to set. - 4 digits
code
Prefix AIM Symbol ID Symbol Prefix AIM 128, 41h=“A”
Prefix 1 or3characters Symbol Symbol Or
“
C
Configur ”
ID
ing Scanned DataScanned modified
Your 73 by DataWizard by
Variable
Scanner
length
Suffix AIM Symbol ID Symbol Suffix AIM 1 or3characters Suffix Symbol Symbol Or
ID
1 Postamble
- 15 characters 15
(RS232/USB COM (RS232/USB interface) 1 character ETX
FuzzyScan Programming Manual Family Code Selection Family Code Good ReadIndicatorGood Buzzer Tone Adjust Power On Indicator Power On Vibrator PROGRAM
Control
Power On & Good Read &Good On Power P.C SS SS SS SS SS SS SS SS SS SS SS SS SS SS
A Enable Disable Enable Disable LED flash Disable (LEDoff) Buzzer tone Buzzer tone Buzzer tone Buzzer tone Buzzer tone Optional function LED No power Power 560/ steady F560 series - on beep
-
on beep
on - – – – –
extremely high high medium low mute
scanner doesn is
(Frequency 1.2
Buzzer (Frequency 2.81
only available forvibrator model. Op (Frequency 2. Configur eration Control eration Parameter Selection Parameter (All Series) (All
(Frequency 2.93
’ ing Tone Adjust t support this function. 0
Indicator kHz)
Your 70 kHz) 74
kHz)
Scanner
kHz)
,
Vibra ,
tor
Control Option Code F_ DEFAULT 1 0 1 0 2 1 0 6 5 4 3 2 1 0
FuzzyScan Programming Manual Family Code Selection Family Code
Buzzer Volume PROGRAM
P.C SS SS SS
High Medium Low
Operation Control Operation Buzzer VolumeBuzzer Configur Parameter Selection Parameter (A Series) ing
Your 75
Scanner
Option Code F_ DEFAULT 2 1 0
FuzzyScan Programming Manual .
The Redundancy is the number of times the same barcode label has to be decoded before decoded be to has label barcode same the times of number the is Redundancy The automatically adjusted by the scanner bythescanner adjusted automatically 1D Barcode Family Code Selection Family Code
Redundancy PROGRAM Inverse Reading Inverse
and cannot beset manually by the user. P.C SS SS SS SS SS SS SS SS
Redundancy Redundancy Enable Disable Level Level Level Level Level To prevent potential None
5 4 3 2 1
miss reading. Operation Control Operation Configur & 1D Code Inverse Reading Code Inverse & 1D (F &L Series)
Parameter Selection Parameter ing
Your 76
Scanner the result the
is transmitted. is
For A Series 2D Imagers, the Redundancy level is level Redundancy the Imagers, 2D Series A For Option Code F_ DEFAULT 1 0 5 4 3 2 1 0
FuzzyScan Programming Manual . .
This The will not allow of reading the same barcode twice Family Code Selection Family Code
Reread Delay Good Read (Double
Good ReadDelay Good Reread Delay PROGRAM Sc
Delay an
(Double Scan(Double Verification)
Verification)
is
the minimum amount of time before the imager can read
P.C SS SS SS SS SS SS SS SS SS SS SS SS SS
is designed toinhibit FuzzyScanfrom reading the same bar code label twicein pre
.
Reread 2 sec. 1.5 sec. 1 sec. 500 msec. 200 msec. None Long time out Medium time out Short time out Immediate time out Disable 3 sec. Force verification
Delay&
Operation Control Operation
Configur
Parameter Selection Parameter (All Series) (All Good Read Delay Good Read another barcode. ing
Your 77
Scanner
Control - defined short duration. ForceVerification Option Code F_ DEFAULT 6 5 4 3 2 1 0 5 4 3 2 1 0
FuzzyScan Programming Manual . .
trigger trigger. the press you when The till the pre The Family Code Selection Family Code
Light Source On Time On Source Light Presentation Mode Presentation
Light Source On TimeOn Source Light Hands Free TimeHands Free operation - defined light source time on is up. PROGRAM ) ,
the im
, Force Mode Force , ager
- out
You can You is a pre ais
will
revert tothe original handsmode free
- defined
remain the scanner the remain and P.C Flash Mode Flash SS SS SS SS SS SS SS SS SS
You canYou adjust tomeet thisparameter your ownapplication requirement. light sourcelight
Light Source On Time, On Source Light Time HandsFree Extremely long Long Medium Short Extremely long Long Medium Short Disable are referred to as “hands free” mode. free” “hands as to referred are
time out counter for counter out time
in manual trigger mode by setting the Hands Free Time Free Hands the setting by mode trigger manual in
.
Operation Control Operation Configur
Alternative Mode, Presentation Mode and Level Mode Leveland AlternativePresentationMode Mode, Parameter Selection Parameter (All Series) (All ing
Your 78
Scanner The hands The
free mode will be automatically changed to manual trigger mode trigger manual to changed automatically be will mode free
- Out. Once the time the Once Out.
- out
.
The scanner keeps the light source on source light the keepsscanner The - out duration Option Code F_ is DEFAULT up 4 3 2 1 0 3 2 1 0
(if there’ (if
s no
any FuzzyScan Programming Manual . . .
p The Use till the pre The Time PowerMode Low Delay to ower Family Code Selection Family Code Light Source On Time On Source Light Good Read Duration Time Delay to Low Power Mode Power Low to Delay Time
m Good ode. - defined light source time on is up. PROGRAM
Read
Duration
(Good ReadBeep and Vibration Duration) todefine beeps and vibration according preferenceto operator and workenvironment
is a pre ais
- defined
sets the time for scanner to enter low power mode after any scanning activity scanning any after mode power low enter to scanner for time the sets P.C SS SS SS SS SS SS SS SS SS SS SS
You canYou adjust tomeet thisparameter your own application requirement. light sourcelight
9 sec 7 sec 5 sec 3 sec 1 sec Extremely short Long Medium Short I Extremely mmediate
time out counter for counter out time Time LowPower Delay to long
Good Read Duration, Good Read Operation Control Operation Configur
Alternative Mode, Presentation Mode and Level Mode Leveland AlternativePresentationMode Mode, Parameter Selection Parameter (All Series) (All ing
Your 79
Scanner
Mode
. This setting is onl is setting This . .
The scanner keeps the light source on source light the keepsscanner The y available for the scanner in l in scanner the for available y Option Code F_ DEFAULT 5 4 3 2 1 0 4 3 2 1 0
.
ow FuzzyScan Programming Manual . .
the barcode. The When enabling
Family Code Selection Family Code
P Presentation Presentation Presentation Sensitivity Presentation resentation
PROGRAM
the
S Presentation
ensitivity Auto
- sense
is used to configureisusedsensitivityto the scanner the issetaswhen level
Auto
- sense, P.C SS SS SS SS SS SS SS SS SS the scanner can beswitched
Level 7 Level 6 Level 5 Level 4 Level 3 Level 2 Level 1 Enable Disable Presentation
Operation Control Operation Configur from
Auto Parameter Selection Parameter (All Series) (All
hand ing - - held
Your Sense 80
and Scanner hand presentation
& Sensitivity - free
scanning automatically when working with the
mode. T he higherhe levermeans higher sensitivity detectingfor
Option Code F_ DEFAULT
SmartStand. 6 5 4 3 2 1 0 1 0
FuzzyScan Programming Manual . . . . .
If you have any problem to use DataWizard, please refer tofollowing pages Please note all that “ readings. A Windows resourcesthe to Due you to arrange the transmissionof scanned to any data specific without format software modification. as ways many in transmissions the prior data scanned the process can you DataWizard Condensed Version DataWizard Version Condensed Symbology IDTransmissionSymbology Family Code Selection Family Code Data Length Transmission Length Data - based operating system.
PROGRAM isthemostpowerful, Artificial Postamble Preamble
Character concern
, Full ” input should to be referred the
-
feature DataWizardfeature
is provided by each FuzzyScan s FuzzyScan each by provided is - P.C Intelligencebasededitingdatasystem expert speciallyFuzzyScan providedthe codereaders. Throughfor bar DataWizarfamily MS MS SS SS SS SS SS SS SS SS SS SS SS
Enable both prefix and suffix Enable suffix Enable prefix symbologyAIM transmission ID Enable both prefix and suffix symbology ID Enable suffix symbology IDtransmission Enable prefix symbology IDtransmission Disable symbology IDtransmission Enable 2 Disable 1 None 1 None Maximum 15 Maximum - - 15 characters 15 characters Data Length
is only supported bysupported isonly ~4 15
digits data length transmission ASCII/HEX Table - - AIM character input; scan “FIN” toterminate this selection. character input; scan “FIN” toterminate this selection.
Condensed DataWizard Condensed symbology ID Preamble, Postamble, Preamble, canner Configur for details PowerTool Insert ,
. Through this menu, the condensed DataWizard can be utilized be can DataWizard condensed the menu, this Through . AIM Symbol IDTrans Parameter Selection Parameter
listed inAppendix to find matched HEX value.
transmission ,
ing symbology ID Delete , as as well
Your 81 .
ThroughPowerTool,the configurations all settingscanbe and
,
Match Scanner transmission
consult your FuzzyScan local our vendor or web site for
transmission ,
Verify
,
Replace
mission
,
Reorganize
, and , Repeat Transmission Repeat easily Option Code F [00 [00 _
done on done further via ba via DEFAULT - - 7 7 FIN FIN F F 6 5 4 3 2 1 0 1 0 ], [FIN] ], [FIN]
rcode menu rcode
. It will help will It . assistance. - screen
on d, d,
FuzzyScan Programming Manual . . . .
All of the aboveprogrammable parameters While Formatter theisData enabled, it arranges only scanned without data symbologies for formattercontrol, and provides The Please note all that “ Regarding the “ Family Code Selection Family Code aa Formatter Data
Formatter Formatter 2nd Insertion 3rdInsertion 4th Insertion 1st Insertion PROGRAM Bar Code Selection
Character Control
s sd o dt h sand a dt pir o rnmtig h dt t te ot optr o trias I alw yu o sele to you allows It terminals. or computers host the to data the transmitting to prior data raw scanned the edit to used is
” input should to be referred the
” and “ P.C Position Calculation MS MS DS DS DS DS SS SS SS SS SS perform the same function depending your on setting.
Multiple Position Insertion Enable Disable Enable Disable Enable Disable Enable Disable Select allbarcode symbologies Select one barcodesymbology Disable 2 2 2 2 - - - - digits identified position; max.3 insertion characters digits identified digits identified position; max.3 insertion characters digits identified position; max.3 insertion characters
ASCII/HEX Table ” ofdata formatter, please referto page Condensed DataWizardCondensed Parameter Selection Parameter Data Setting Formatter position; max.3 insertion characters Configur Preamble
and
Multiple Character Insertion
listed inAppendix to find matched HEX value.
ing , Postamble
Your 82
Scanner
, STX
7 ,
5 ETX
for details. ,
Data Length ( max three characters) in the identified position. Option Code
(2 digits) (2 digits) (2 digits) (2 digits) (2 digits) position position position position , FIN FIN FIN FIN FIN 00 Prefix/Suffix Symbology ID
2ndOption Code 2ndOption [1 [1 [1 [1 automatic termination automatic termination - - - - 3 characters], [FIN] 3 characters], [FIN] 3 characters], [FIN] 3 characters], [FIN] F _ DEFAULT ct desired bar code code bar desired ct
or
Record Suffix
. FuzzyScan Programming Manual . . . . .
FuzzyScan will nottransmit the data tothe host computersor terminals, but will instead issue must data All Please note all that “ Regarding the “ The DataVerifier checks only scanned data without The Family Code Selection Family Code Data Verifier 2nd I 3rdI 1st I Identified Data Length Data Identified Verifier Control de de de PROGRAM
n n n conform tified Character tified tified Character tified tified Character tified Bar Code Selection
is used to provideadvancedverification for error
C haracter to the
Identified Bar Code Symbologies Code Bar Identified ” input should to be referred the
” and “ P.C Position Calculation MS MS DS DS DS DS SS SS SS SS SS
2 Enable Disable 2 Enable Disable 2 Enable Disable Determine the identified data length for verification. Enable Disable Select allbarcode symbologies Select one barcodesymbology Disable
- - - Prea digits checking position; 1 identified character digits checking position; 1 identified character digits checking position; 1 identified character mble
, ASCII/HEX Table Postamble ” of , Identified Data Length Data Identified - Condensed DataWizardCondensed free scanning and towork as an Parameter Selection Parameter Data Verifier Data Verifier Setting , Configur STX ,
, please refertopage listed inAppendix to find matched HEX value. ETX
ing , Data Length
Your 83 , and one to three to one and ,
3 long beeps3 long Scanner
Embedded Data Transmitting Filter ,
Prefix/Suffix Symbology ID
7 5
for details.
for verification error and
Identified Characters Identified
Option Code (2 digits) (2 digits) (2 digits) (2 digits) (2 digits) position position position FIN FIN FIN FIN FIN 00
or
in the checking position. Otherwise, the the Otherwise, position. checking the in skip
Record Suffix
the scanned data. .
2ndOption Code 2ndOption automatic termination automatic termination F _ .
DEFAULT [00 [00 [00 - - -
7F] 7F] 7F]
FuzzyScan Programming Manual . . . .
arranges only scanned data without the to conform must data All symbologies for replacer control, and provides The Please note all that “ Regarding the “ Family Code Selection Family Code aa Replacer Data
2nd Replacement 3rdReplacement Replacer 1st Replacement 1st PROGRAM Bar Code Selection
Control Character s sd o dt h sand a dt pir o rnmtig h dt t te ot optr o trias I alw yu o sele to you allows It terminals. or computers host the to data the transmitting to prior data raw scanned the edit to used is
Identified Bar Code Symbologies Code Bar Identified ” input should be r
Preamble ” and “ P.C Position Calculation MS MS DS DS DS SS SS SS SS
, Multiple Multiple
Postamble eferred tothe Enable Disable Enable Disable Enable Disable Select allbarcode symbologies Select one barcodesymbology Disable 2 2 2 - - - digits identified position; 1 replacement character digits identified position; 1 replacement character digits identified position; 1 replacement character Position Repl
, STX ASCII/HEX Table ” ofData Replacer, please referto page , , and one to three to one and , ETX Condensed DataWizardCondensed Parameter Selection Parameter Data Setting Replacer , a Data Length cement Configur
in the identified position.
listed inAppendix to find mat
Identified Characters Identified ing , Prefix/Suffix Symbology ID
Your 84
Scanner
7
5
for details. in the identified position identified the in
c h ed HEXed value.
or Option Code
Record Suffix (2 digits) (2 digits) (2 (2 digits) position position position
digits) FIN FIN FIN FIN 00
. W . .
hile the Data Replacer is enabled, it enabled, is Replacer Data the hile 2ndOption Code 2ndOption automatic termination automatic termination F _ DEFAULT [00 [00 [00 t eie br code bar desired ct - - -
7F] 7F] 7F]
FuzzyScan Programming Manual . . . .
Suffix dat scanned only arranges it enabled, is Organizer Data the While including data the send to positions identified two maximum provides and control, organizer for symbologies The Please note all that “ Reg Family Code Selection Family Code a aa Organizer Data Include/Exclude Control Include/Exclude rding the “ .
Organizer Control Organizer 2nd Organization 1st Organization
or PROGRAM excluding Bar Code Selection
Character
s sd o dt h sand a dt pir o rnmtig h dt t te ot optr o trias I alw yu o sele to you allows It terminals. or computers host the to data the transmitting to prior data raw scanned the edit to used is
the data ofidentificationposition. totheapplication refer Please examplelisted in pag
” input
” and “ should to be referred the P.C Position Calculation MS MS DS DS DS SS SS SS SS
Transmitted data included the dataofidentifiedposition Transmitted data excluded the dataofidentifiedposition Forward/backward datatransmission setting 2 Enable Disable Enable Disable Select allbarcode symbologies Select one barcodesymbology Disable Forward/backward 2 - - digits identified position; digits identified position;
ASCII/HEX Table ” ofData Organizer, please referto page Condensed DataWizardCondensed Parameter Selection Parameter Data Setting Organizer a without a data transmission setting Configur
Preamble .
ing
Your 85 , Postamble
Scanner
forward ,
STX
7
5
, f or or details. e 7 ETX
b 5 ackward
, for details.for Data Length Data Option Code
(2 digits) (2 digits) (2 digits) direction direction . It also allows you to control the transmitted data transmitted the control to you allows also It . position position FIN FIN FIN
00 1 0
,
Prefix/Suffix Symbology ID Symbology Prefix/Suffix
2nd Option Code Option 2nd A A utomatic termination utomatic termination F 0 (Forward) 0 (Forward) 1 1 (Backward) _ (Backward) DEFAULT t eie br code bar desired ct
or Record
FuzzyScan Programming Manual FuzzyScan will arrange all incoming data to meet your your listedbelow. code option the one of select please code, meet to data incoming pre all arrange will “00” FuzzyScan scan transmission you advanced If for arrangement. DataWizard Condensed use to symbologies code bar of types all or one select can You Code Symbology aBar Select
Trioptic Code 32 Code 39 Codabar/NW EAN EAN EAN EAN EAN EAN UPC UPC UPC UPC UPC UPC GS1 Code 128 ------128 8 8 8 13 13 13 E with 5 E with 2 E A with 5 A with 2 A defined format. If you want to select only one type bar bar type one only select to want you If format. defined
with5 supplement with2 supplement
Code 39 with 5 supplement with 2 supple
- 7 supplement supplement supplement supplement
ment
1D BarCode Symbology 47 37 07 06 45 35 05 44 34 04 43 33 03 42 32 02 31 01
Code 49 Code 16K Codablock Micro PDF417 PDF417 Coupon Code IATA Composite Codes GS1 DataBar Expanded GS1 DataBar Limited GS1 DataBar Telepen UK/Plessey MSI/Plessey Code 11 Code 93 Standard/Industrial 2of 5 German Postal Code China Postal Code Interleaved 5 2 of Matrix of5 2
to select all types, the the types, all select to
F
Configur
20 19 18 25 17 16 15 24 23 22 14 13 12 11 10 09 08 68 58 48 38 ing
Your 86
Scanner identification. for position theactual tocalculate following a11 If thereis [Data Verifier,Data Replacer,Data Organizer] insertion: for position theactual tocalculate following a5 If thereis [Data Formatter] Calculation Position GS1 DataMatrix DataMatrix Micro CodeQR Intelligent Mailbarcode British Post Australian Post Korea Code Post 00 00 X
QR 01 X X
Code
02 01
X
- character input data string, refer to to the refer string, data input character - character data string, please please string, data character 03
X X
2D BarCode Symbology 04 02 X
Postal Code 05 X X B B B A5 A A A 21
3 1 0 1 0 0
06 03 X Postnet Planet Code KIX Post Japanese Post Chinese CodeSensible Aztec MaxiCode
Code 07 X X
08 04 X
refer to the referthe to 09 X X
10 05 X
B B B B A A A
8 6 5 4 4 3 2
FuzzyScan Programming Manual ...... software foryouwithout following modification: number and 4 6 of information the includes 16 a is label code bar your If Example Application
Actual Output : Output Actual Tes 2digits. first the skipped be should output price unit The “SN”. with beled should number output serial The “A”. by it replaced and “9” skip should output code date The Three outputs with“TAB” suffix. Allow bar condensed the to 16 with actually codeis bar Check 5 of 2 DataWizard. Interleaved only Apply t Bar Code : Code t Bar
code code output whose date code is leading with “9”. - digit digit unit price, you want the FuzzyScan do the
A81025[TAB]SN123456[TAB]76[TAB] 9 810 2 5134 5 69 876
- - digit digit Interleaved 2 of 5 which 5 of 2 Interleaved digit
ae oe 6 code, date - digit length.
- digit serial serial digit Configur
ing
Your 87
Scanner . . [Data Verifier] Procedure Programming . . . . [Data Formatter] . .
selectio “ scan must “ to position identified the set and Insertion” “3rd Scan selection. “ scan must “ to position identified the set and Insertion” “2nd Scan TAB), “ to “ position identified the set and Insertion” 1st Scan to “ symbo code bar set and Control” “Formatter Scan of 9). (Hex Code to “ position identified the set and Character” Identified “1st Scan to length the “ set and Length” Data “Identified Scan “ to symbology code bar set and Control” “Verifier Scan mode. programming the toenter “Program” Scan 16 12 06 16 4 8 , hn netd hrce t “ to character inserted then ”, character inserted then ”, “ to characters inserted then ”, 4 ”. 5). 2 of ” (Interleaved
8
”. 53
n. ” (Hex Code of S),“ Codeof ” (Hex
00
FIN FIN ”, then set the identified character to “ identifiedcharacter set the ”, then
” (Finish) code to terminate this this terminate to code (Finish) ” this terminate to code (Finish) ”
4E
o “ to ” (Hex Code of N). of Code ” (Hex 09 09 09 . n h fnl you final, the In ”. you final, the In ”. (e Cd of Code (Hex ”
logy logy 39 ” FuzzyScan Programming Manual [Important Notice] . . . . [Data Organizer] . . [Data Replacer] via Data Formatter. set already you which data inserted the consider must you the set you when So Verifier the follow will DataWizard below: as flow working preset Condensed that note Please
Scan “ Scan “ to position identified the set and Organization” “2nd Scan “ to position identified the set and Organization” “1st Scan “ sym code bar set and Control” “Organizer Scan “ to position identified the set and Replacement” “1st Scan “ to symbology code bar set and Control” “Replacer Scan 17 16 4 00 4 8 8 ”, then set the dataset the “ to ”, then transmission dataset the “ to ”, then transmission ”. “ to character replaced ”, then ”.
END
omte Formatter ” (Exit) to terminate the programming. the terminate (Exit) to
dniid oiin n aa Organizer, Data in position identified
elcr Replacer
41 ” (Hex Code of ” (HexCode A).
1 0 ” (backward). ” (forward). Organizer Configur bology to to bology
ing
Your 88
Scanner
FuzzyScan Programming Manual
APPENDIX Appendix 89
FuzzyScan Programming Manual UCC CouponUCC IATA Code 25 Codabar Code 128 UPC Code Family ] = Flag Character ] =Flag the three contains Identifier AIMCode Each Table ID Symbology
is transmitted as Example: A EAN is transmitted as Example : A UPC CouponUCC Code IATA German Postal Code China Postal Code Interleaved 5 2 of Matrix of5 2 Standard/Industrial 2of 5 Codabar/NW GS1 Code 128 transmitted as Example: A UPC UPC UPC UPC UPC UPC UPC ------
128 E with 5 supple. E with 2 supple. E A with 5 supple. A with 2 supple. A Primary Format
; - 7 ]E0
]E0 c = Character Code - - ]E0
- 13 9923456789019 + GS1 A bar 012345678950code supplementwith 2 12is A 512345678900 GS1 + 012345678950
512345678900 9923456789019
V ]E Hex alue ]C1 15 68 58 48 38 08 06 31 01 43 33 42 32 1 3 2
]C1 12
Cino ID 81010123451297
81010123451297 Z
- 128 81010123451297 barcode - Char 128 81010123451297128bar code
; M O D C K B E A L J I
.
m = Modifier Character m =Modifier - character string string character Char Code
R C X X S E F I I
.
AIM ID 1D Symbology ID Table Modified Char
m m m m m 0 0 0 1 2 1 0 2 1 0
Appendix
.
]cm 90 Remark: Aboveexamples are given ofID. for the transmission AIM Korea Post Codablock PDF417 Code 39 Composite GS1 DataBar Telepen UK/Plessey MSI/Plessey Code 11 Code 93 EAN/JAN
Code Family
where:
Korea Code Post Codablock F Micro PDF417 P Code 32 Code 39 Trioptic Code 39 Composite Code GS1 DataBar Expanded GS1 DataBar Limited GS1 Databar Telepen UK/Plessey MSI/Plessey Code 11 Code 93 transmitted as Example: A EAN/JAN EAN/JAN EAN/JAN EAN/JAN EAN/JAN EAN/JAN EAN/JAN DF417 Primary Format
------13 with 5 supple. 13 with 2 supple. 13 8 with 5supple. 8 with 2supple. 8
]E4
49123562
-
8 bar49123562 with5 code supplement 12345is
]E2 Value 12345 Hex 21 18 25 17 37 47 07 24 23 22 14 13 12 11 10 09 44 34 04 45 35 05
Cino ID
Char
W G G R H N Y V X S P T F a
.
Char Code M O G H X A X A B P E E L e
.
AIM ID Modified Char
m m m m m m m m 0 0 0 0 2 1 0 2 1 4
.
FuzzyScan Programming Manual Australian Post Sensible Chinese Aztec Code MaxiCode Data Matrix Code Micro QR CodeQR Code Family
Australian Post Chinese Sensible Aztec Code MaxiCode GS1 DataMatrix Data Matrix Micro QRCode CodeQR Primary Format
V Hex alue B0 A4 A3 A2 A5 A1 A0 Cino ID
Char
g e d b c f
.
Char Code Q U X d z
.
AIM ID 2D Symbology ID Table Modified Char
m m m m 0 0
Appendix
.
91 Postnet Planet Code KIX Post Post Japanese Mail barcode Intelligent British Post
Code Family
Postnet Planet Code KIX Post Japanese Post Intelligent Mailbarcode British Post Primary Format
Value Hex B8 B6 B5 B4 B3 B1
Cino ID
Char
m o h k l j
.
Char Code X
.
AIM ID Modified Char
0 0 0 0 0 0
.
FuzzyScan Programming Manual Keyboard Function Code Table Code Function Keyboard
No. 19 18 17 16 15 14 13 12 10 09 08 07 06 05 04 03 02 01 00 11
ANSI DC3 DC2 DC1 DLE ENQ SOH ACK EOT NUL ETX STX BEL SO CR HT BS VT FF LF SI
ASCII 0DH 0CH 0EH 0BH 0AH 0FH 01H 00H 13H 12H 10H 09H 08H 07H 06H 05H 04H 03H 02H 11H
Key Function BACK SPACE ENTER (CR) CAPS LOCK RESERVED NUM LOCK CTRL (Left) ALT (Left) SHIFT ESC TAB F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Appendix
92
1
Key Function 2 Ctrl +@ Ctrl +M Ctrl +O Ctrl +G Ctrl +N Ctrl +H Ctrl +D Ctrl +C Ctrl +K Ctrl +E Ctrl +B Ctrl +F Ctrl + Ctrl +L Ctrl +J Ctrl +I Ctrl +Q Ctrl +R Ctrl +S Ctrl +
A
P
Key Function 3 CTRL BREAK (Left) ALT BREAK (Left) CTRL MAKE (Left) ALT MAKE (Left) BACK SPACE ENTER (CR) CAPS LOCK NUM LOCK ESC TAB F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
*
FuzzyScan Programming Manual . Spain Sweden Belgium United State Country The
The COMPAQ PC, HP Vectra PC, Notebook PC, APPLE and PowerMac, and WYSE PC PC WYSE and PS/VP, PowerMac, PS/2, IBMPC/XT/AT, and for APPLE machines. is PC, which Notebook Table PC, Code Vectra Function HP Keyboard PC, above COMPAQ the to refer Please scanner. the by the ASCII0 Reserved using content actual configure must user parameters, definable user for input key function keyboard the To emulate
No. 31 30 29 28 27 26 25 24 23 22 21 20 last character in the Ctrl Output column is varied for different for varied is column countries. Output the Ctrl in character last Key Function 3 Table
(refer to(refer Keyboard Layout)
- - - - ANSI
CAN NAK ESC SUB SYN DC4 ETB EM GS US RS FS
0
– is only supported by
31
characters, and also also and characters, Italy Denmark UK Switzerland ASCII & Character 1DH 1CH 1EH 1BH 1AH 1FH 15H 14H 19H 18H 17H 16H
A series and PAseries
- - - - Enable
Key Function PAGE DOWN (Edit) DEL (Delete) (Edit) INS PAGE UP (Edit) DOWN DOWN (Edit) RIGHT (Edit) HOME HOME (Edit) LEFT (Edit) END (Edit) UP (Edit) (Insert) (Edit)
. the “Function KeyEmulation”. Otherwise, the “Function
F12 F11 Appendix
93
Norway Germany France
1
Key Function 2
*see below note - - =
Ctrl +W Ctrl +U Ctrl +X Ctrl +V Ctrl + Y Ctrl +Z Ctrl + T Ctrl +6 Ctrl +] Ctrl + Ctrl +[ \
Enhanced or fully compatible compatible fully or Enhanced the Ctrl ou Ctrl the Key Function 3 SHIFT BREAK (Left) PAGE DOWN (Edit) SHIFT MAKE (Left) WIN BREAK (Left) WIN MAKE (Left) PAGE UP (Edit) DOWN DOWN (Edit) RIGHT (Edit) HOME HOME (Edit) LEFT (Edit) END (Edit) UP (Edit) t put will be done done be will put
FuzzyScan Programming Manual Code Page Page Code
Hebrew Israel Hebrew Greece Greece German French Finnish English English English English English English English Estonian Dutch Danish Czech Cyrillic Croatia Catalan Bulgaria Baltic Arabic Arabic Albania
n
n -
------
n
write Australia Philippines South Africa State United Zealand New Canada Kingdom United
Description
–
Table
s
of Corresponding Languages Corresponding of Code 1256 1255 1253 1251 1257 720 850 862 737 850 850 850 437 437 437 850 850 850 850 775 850 850 852 852 850 866
P age
Appendix Italian Icelandic Hungarian Vietnamese Turk Thai (Simple) Chinese (Tradition)Chinese Swed Spanish Slovenia Slovakia Serbia Russia Romanian Portuguese Polish Norwegian Lithuanian Latvian Latin America Latin 5 Latin 2 Latin 1 Korea Japan 94
ish
ish
n ese
n
n
n n
Description
n
Code 1258 1254 1250 1252 857 874 936 950 850 850 852 852 855 866 852 850 852 850 775 775 850 949 9 850 850 852 32
P age
FuzzyScan Programming Manual 1. Page Code
Step3: St Prompt. 1: Step Windows
e p 2: Go toHKEY_CURRENT_USER Open the Registry Editor. You can do so by typing typing by so do You can Editor. Registry the Open
Right - Setting up the Windows Windows Registry Setting the up –
- Unicode Hex Input Setup Input Hex Unicode click on mouse or or on mouse click press press shift to keyboard) +F10(on \ Control Panel Control
\ Appendix Input MethodInput 95 “regedit” in the “Search Windows” function or in Command Command in or function Windows” “Search the in “regedit”
add anew String Value
( of type “ REG_SZ ” ) .
FuzzyScan Programming Manual 2.
Step1: MAC Step Step4:
5 -
: Adding Unicode Hex Input in menu bar menu in Hex Input Unicode Adding
Go to the Go tothe Apple Menu computer the Reboot String new Name the as value .
- > System Preferences Preferences > System
“ EnableHexNumpad
Appendix - > Keyboard 96 ” and set its set and ” Value data “ to
1 ”.
FuzzyScan Programming Manual Step2: Step3:
Click the the Click tab, Keyboard On the click “ + ”
button to add an input source. source. aninput add button to on “ Input Sources Input
”
Appendix and check the the check and 97
“ Show Input menu in menu bar menu in Show menu Input ”
box.
FuzzyScan Programming Manual
Step6: Step5: done, c Step 4:
lick lick Scroll Scroll to and select “Others”. Click on
Change the input selection to Unicode Hex Input in menu bar. menu in Hex Input to Unicode selection input the Change menu. Preferences Keyboard the Close on “ the Add ”
button.
“ Unicode Unicode Hex Input
Appendix 98
” (you can also use
the the Search function to find it) . When When FuzzyScan Programming Manual . . . . . reference. belowfor listed is procedure Sign, you have to set the “Preamble” to “$”. The configuration leading output data scanned the want you If Example: “ in value your ASCII scan desired to you ask will FuzzyScan menu, programming Tovia FuzzyScan of parameters definable user the configure Shortcut Input ASCII . . HEX/ASCII TableHEX/ASCII
mode for normal operation. normal mode for Scan the system command setting. Preamble command system the Scan code option the Scan code option the Scan of “ Refer code family Scan 3 command system the Scan - 24 toenter programming mode. $ ” is ” is to the the to
24 .
Hex/ASCII TableHex/ASCII ” for details.” for
–
PREAMBLE HEX – –
4 2
listed on the fold out back cover. back the out on fold listed cover. back the out on fold listed
form. You have to refer to the the to refer to have You form.
– –
– End PROGRAM PROGRAM , you will find the HEX value value HEX the find will you ,
I (Finish) FIN
to select this family. this to select
to exit the programming
listed on pageon listed
with a Dollar Dollar a with to terminate terminate to
Appendix
99
HEX/ASCII Reference TableHEX/ASCII Reference
L
Example: D C B A E F 9 8 7 6 5 4 3 2 1 0
H
: ByteLow ofHEX Value : ByteHigh of HEX Value ENQ SOH ACK EOT NUL ETX STX BEL SO CR HT BS VT FF LF SI 0
ASCII “A” CAN ESC SUB SYN NAK DC4 DC3 DC2 DC1 ETB DLE EM GS US RS FS 1
SPACE % 2 & + $ # * " - ) ( / . , ! '
HEX “41”; “a” ASCII
3 > = < ? 9 8 7 6 5 4 3 2 1 0 ; :
@ M O G N H D C 4 K E B A F L J I
W Q U R 5 Y X V S P Z T _ ^ ] \ [
m 6 o n h g e d b a k c ` f l j i
“61”
DEL w 7 ~ u q p z y x v s } { r t |
FuzzyScan Programming Manual Set Quick Interface Host
Keyboard Replacement USB HID Legacy Mode RS232 Serial
Commands
USB HID
USB HID Appendix Standard Mode Turbo 100
Mode
PS/2 (DOS/V) KBW Standard Mode PS/2 (DOS/V) KBW USB
C om
Port Emulation
Turbo Mode
FuzzyScan Programming Manual Set Quick Mode Operation
Low Presentation Trigger (External trigger
Power (Low power trigger) Multiple Read (Auto sensing)
ing
)
Comm ands ands Alternative (Periodic power off) Flash (Pulse driven reading) Level power off)(Auto (F & L Series) L & (F Appendix 101
Force Diagnostic Toggle (Repeat reading) (Continued power on)
(Test reading)
FuzzyScan Programming Manual Operation Mode Quick Set Quick Mode Operation
Low PowerLow (Low power trigger) Presentation Trigger (External triggering) (Auto sensing)
Commands Commands
Alternative (Periodic power off) Level power off)(Auto (A Series) (A Multiple Read Appendix
102
Force (Continued power on) Diagnostic Toggle (Repeat reading)
(Test reading)
FuzzyScan Programming Manual Option Codes Option
FIN (Finish) 0 4 3 2 1
9 8 7 6 5
Appendix
Abort 103
D C B A E
END F (Exit)
FuzzyScan Programming Manual System Commands System . . .
would lik User Control Control Default: Master Factory Default: Default: (Enter Programming(Enter Mode) , (Exit Programming Mode) e to return topreviouse to return setting, please scan
(except Record Suffix; Preamble; Postamble), Preamble; Suffix; Record (except the rest of parameters will be returnedto default value.
After scanning After
FIN (Finish) After scanning “Master Default” command, the scanner will remain the pre the remain will scanner the command, Default” “Master scanning After PROGRAM After scanning END
“ Save User Save
”
Factory Default
Default ”
command, all parameters will be returnedto factory default value. ”
“ command, all command, User Default Serial Interface Control Interface Serial
” . Save UserDefault
current User User Default Appendix parameters will be will parameters 104
(except Record Suffix; Preamble; Postambl Preamble; Suffix; Record (except
- stored to the flash memory. Once you change the parameter and parameter the change you Once memory. flash the to stored set parameters of parameters set Host Interface Selection Interface Host
System Information List PowerTool Host Link Factory Master Default (SYSLIST) e),
Default Default and
adLsr Emulation Wand/Laser
, Keyboard Interface Keyboard
FuzzyScan Programming Manual
Appendix 105