Viper S Series (Patent Pending) GRAVITY FEED Was Developed Inhouse by Bell Marine

product CATALOGUE

WORLD CLASS

STAINLESS STEEL CHANDLERY & 2018/19 PERFORMANCE BOATING ACCESSORIES INDEX

Anchor winches A word from the Managing Director - Mr. Bell Chen

Dear Valued Dealer,

Anchor winch From our humble beginnings in 1997 situated in a 2000 sq feet warehouse in Seaford Victoria, where we accessories purchased finished product from various manufacturers, to our current wholly owned manufacturing facility with over 16 staff plus a brand new warehouse/distribution facility in Carrum Downs, Victoria. Today Bell Marine is one of only a handful of premier stainless steel chandlery and marine accessories manufacturers that still hand-make and hand-polish all of our own products to a mirror finish without the use of chemical polishing. Bait Boards Seat Bases & Tackle This year we are pleased to anounce, we have now added a free fall drum winch to our range. The New Boxes Viper S Series (patent pending) GRAVITY FEED was developed inhouse by Bell Marine. After 3 years of R&D and 2 years of field testing the Viper Gravity Feed has now proven itself to be a serious contender in the high performance anchoring arena. The Gravity Feed winch is designed without any additional electronics, wiring or solenoids that can be the downfall in harsh boating environments. Outriggers Bell Marine also has achieved IP68 certification with our submersible range of anchor winches which includes our own design 316 marine grade worm drive stainless steel gear box, making VIPER the preferred choice to boaties all around the world. From design to finish, Bell Marine is the only winch company that manufactures our own stainless steel worm drive gearboxes in-house including all Rod Holders & 1000W submersible electric motors which enable VIPER power up and down anchor winches to run at Accessories speeds of 50 metres per minute ensuring you get onto your GPS mark first time, each and every time.

S/S Rocket To celebrate our 10th anniversary we have released our brand new Anniversary Edition VIPER Xtreme Launchers removable deck mount and side mount versions of our outriggers. Our 3 stage 16ft matte black poles are now equipped with spring loaded s/s pins to lock them into the extended position, giving you uninterrupted ﬁshing.

Switches, Panels & All Viper Deluxe Removable Fibreglass baitboard/serving stations are now twin-skin construction enabling a high gloss gel-coat ﬁnish top and bottom which is unmatched in the marine industry. Our Accessories redesigned removable bait board legs complement board and enable easy instalation, each board and Spot Lights - Inside come complete with drain, hose, s/s clamp and deck ﬁttings. Back Cover Thank you for your time and happy selling!

Bell Chen Managing Director Workshop Service Kits & Reﬁll Packs

E & O E SPECIFICATIONS MAY VARY OR CHANGE 1 WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES WITHOUT NOTICE Part Number PART NO. 30038-S s SERIES ‘MICRO’ 1000 ANCHOR WINCH BUNDLE 30038-S Viper The All-New All-Stainless Steel Submersible Anchor Winch! Don’t be fooled by the name “MICRO” or by its size, this is one of the world’s most powerful electric drum winches for its size and was designed to fit into bow riders, tinnies, walk arounds and any boat with restricted anchor well space. It still has our famous Viper 1000 submersible electric motor coupled with stainless steel marine gearbox, solid 28mm stainless steel main shaft with 3 support bearings and comes with our iron clad 5-year Viper warranty. Constructed from 8mm plate 316 marine grade stainless steel (hand polished to a mirror finish) The MICRO’s drum rotates at a fall rate of 45mtrs per minute. Now with emergency manual release incase of power loss. Suits vessels from 4mtr right up to 8mtr.

Size Does Matter! 68 EMERGENCY MANUAL 45 Mtrs IP RELEASE INCLUDED! Per Minute More Power, More Torque, Smaller Package IMMERSION PROOF Fall Rate MICRO DRUM WINCH DIMENSIONS

SUBMERSIBLE 316 STAINLESS STEEL 1000W ELECTRIC MOTOR

28mm 210mm

192mm 5 306mm 316 STAINLESS STEEL YEAR WORM DRIVE GEAR BOX WARRANTY Developed & Built by Bell Marine for Marine applications INCLUDED IN THE S SERIES “MICRO” BUNDLE: 330mm VIPER S 1000 “MICRO” SUBMERSIBLE ELECTRIC DRUM ANCHOR WINCH 30038-S VIPER S SERIES STAINLESS STEEL WORM DRIVE MARINE GEARBOX 237mm *INCLUDED at No Extra Cost* SUPPLIED WITH 1 MTR OF 3 B&S POWER LEADS & JOINING CONNECTORS PRESSURE TESTED & SEALED 60MTRS OF 6MM DOUBLE BRAID PREMIUM ROPE 30045 SPLICED TO 6 MTRS OF 6MM GALVANISED SHORT LINK ANCHOR CHAIN VIPER PRO SERIES ANCHOR SWIVEL SMALL 30001 VIPER DELUXE ANCHOR ROLLER SMALL 30009 30046 90021 30001 200AMP REVERSING SOLENOID 30020 LED ILLUMINATED MARINE ROCKER SWITCH 90021 VIPER LASER ETCHED LED ILLUMINATED SWITCH COVER 90046 100 AMP FLUSH MOUNT CIRCUIT BREAKER WITH RUBBER SEAL 30046 120mm SINGLE LED SWITCH STAINLESS STEEL FACE PLATE 30051 30020 30051 30052 COMBO LED SWITCH & CIRCUIT BREAKER S/S FACE PLATE 30052 5MM STAINLESS STEEL SANDWICH PLATE ALL FIXING HARDWARE + INSTALLATION NOTES & WIRING DIAGRAM MAX FALL RATE: 45MTRS PER MINUTE MAX RETRIEVAL RATE: 40MTRS PER MINUTE 80mm 30009 SUIT VESSEL LENGTH: 4 MTRS + WEIGHT: 15KGS 30045 ALL REQUIRED PACKAGING: INSTALLATION HARDWARE WINCH BOX: 43 X 42 X 31CM 20KG 100mm ROPE KIT: 23 X 23 X 21CM 6KG WINCH BUNDLES: 30038-6S VIPER S SERIES ‘MICRO’ S/S MARINE GEARBOX BUNDLE 60MTRS D/BRAID ROPE

30038-4S VIPER S SERIES ‘MICRO’ S/S MARINE GEARBOX BUNDLE 100MTRS 4MM ROPE

198 OPTIONS: 30038-A ALLOY FITMENT KIT FOR ALL ALUMINIUM BOAT INSTALLATIONS 30053 BLACK 8MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN

90Ø 30053G FLURO GREEN 8MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN 30023 SMALL HAWSE PIPE 316 S/S CAST FOR TRICKY INSTALLATIONS 30006 SINGLE ROLLER VIPER BOW ROLLER SELF-LAUNCHING WITH SAFETY HARNESS 30016 DELUXE 3 ROLLER VIPER BOW ROLLER- SELF LAUNCHING WITH SFETY HARNESS

115mm 30034 FACTORY MADE MARINE WIRING LOOM BOATS UP TO 6MTRS 30035 FACTORY MADE MARINE WIRING LOOM BOATS UP TO 8MTRS 30061 CUSTOM MADE WIRING LOOM MADE TO YOUR SPECIFICATIONS SUIT ANY LENGTH BOAT 30073 OPTIONAL WIRELESS REMOTE CONTROL FOR ALL VIPER WINCHES - 30 METRE RANGE

E & O E SPECIFICATIONS MAY VARY OR CHANGE WITHOUT NOTICE WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES 2 PART NO. s SERIES ‘RAPID’ 1000 ANCHOR WINCH BUNDLE 30021-S Viper The All-New All-Stainless Steel Submersible Anchor Winch! The Viper S Series Anchor Winch has set new standards in anchoring systems. The Viper commercial 1000W submersible electric motor and stainless steel marine gearbox, has made it one of the best selling anchor winches in Australia. With a fall rate of 50 meters per minute and a retrieval rate of over 45mtrs per minute the Viper will ensure you get onto your GPS mark. With unsurpassed Viper reliability, and more torque than a conventional drum winch, 3 support bearings on the 1 piece 28mm solid shaft and a 90 degree welded housing bracket which closes up the gap between your drum, preventing rope jams and the need for additional guards. With our bullet proof 5-year Viper performance warranty, you can’t go past a Viper. Our winch bundles are supplied with everything you need to install it, including a 5mm stainless steel sandwich bracket, all required stainless steel bolts/screws and 2 face plates depending on dash room. All you have to add is your own cabling or our factory made Bell Marine tinned copper wiring loom. You won’t have to break your back pulling up your anchor and chain again! Now with emergency manual release included.

EMERGENCY MANUAL 68 50Mtrs When Performance Matters! IP RELEASE INCLUDED! Per Minute IMMERSION PROOF Fall Rate

SUBMERSIBLE 316 STAINLESS STEEL TECHNICAL SPECIFICATIONS 1000W ELECTRIC MOTOR 5 YEAR WARRANTY 28mm 260mm

316 STAINLESS STEEL WORM DRIVE GEAR BOX 260mm Developed & Built by Bell Marine for Marine applications

375mm *INCLUDED at No Extra Cost* THE “S” SERIES 1000 BUNDLE INCLUSIONS 360mm VIPER S SERIES 1000 SUBMERSIBLE ELECTRIC DRUM ANCHOR WINCH 30021-S VIPER S SERIES STAINLESS STEEL WORM DRIVE MARINE GEARBOX 237mm SUPPLIED WITH 1 MTR 3 B&S POWER LEADS & JOINING CONNECTORS PRESSURE TESTED & SEALED 30020 90021 30001 75MTRS OF 8MM TRIPLE STRAND PREMIUM ROPE 30010 SPLICED TO 8 MTRS OF 6MM GALVANISED SHORT LINK ANCHOR CHAIN VIPER PRO SERIES ANCHOR SWIVEL SMALL 30001 VIPER DELUXE ANCHOR ROLLER SMALL 30009 200AMP REVERSING SOLENOID 30020 30051 30052 LED ILLUMINATED MARINE ROCKER SWITCH 90021 30010 30009 30046 VIPER LASER ETCHED LED ILLUMINATED SWITCH COVER 90046 100 AMP FLUSH MOUNT CIRCUIT BREAKER WITH RUBBER SEAL 30046 120mm SINGLE LED SWITCH STAINLESS STEEL FACE PLATE 30051 ALL REQUIRED INSTALLATION COMBO LED SWITCH & CIRCUIT BREAKER S/S FACE PLATE 30052 HARDWARE 5MM STAINLESS STEEL SANDWICH PLATE ALL FIXING HARDWARE + INSTALLATION NOTES & WIRING DIAGRAM MAX FALL RATE: 50MTRS PER MINUTE 80mm PACKAGING: MAX RETRIEVAL RATE: 45MTRS PER MINUTE WINCH BOX: 46 X 45 X 35 CM 23KG SUIT VESSEL LENGTH: 5.7 MTRS + ROPE KIT: 27 X 27 X 25 CM 9KG WEIGHT: 17.4KGS WINCH BUNDLES: 120mm 30021-8S VIPER S SERIES RAPID S/S MARINE GEARBOX BUNDLE 75MTRS 3 STRAND ROPE 30021-6S VIPER S SERIES RAPID S/S MARINE GEARBOX BUNDLE 100MTRS 6MM B/D ROPE 30021-5S VIPER S SERIES RAPID S/S MARINE GEARBOX BUNDLE 200MTRS 5MM HI SPEC ROPE

OPTIONS:

. 30021-A ALLOY FITMENT KIT FOR ALUMINIUM BOAT INSTALLATIONS

2 30036 BLACK 10MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN 30036G FLURO GREEN 10MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN 30023 316 S/S CAST HAWSE PIPE FOR TRICKY INSTALLATIONS 90Ø 30006 SINGLE ROLLER VIPER BOW ROLLER SELF-LAUNCHING 30016 DELUXE 3 ROLLER VIPER BOW ROLLER- SELF LAUNCHING 30034 FACTORY MADE MARINE WIRING LOOM BOATS UPTO 6MTRS 30035 FACTORY MADE MARINE WIRING LOOM BOATS UPTO 8MTRS 138mm 30061 CUSTOM MADE WIRING LOOM MADE TO YOUR SPECIFICATIONS SUIT ANY LENGTH BOAT 30073 OPTIONAL WIRELESS REMOTE CONTROL FOR VIPER WINCHES - 30 METRE RANGE

E & O E SPECIFICATIONS MAY VARY OR CHANGE 3 WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES WITHOUT NOTICE Patent Pending PART NO. s SERIES ‘GRAVITY FEED’ 1000 ANCHOR WINCH BUNDLE 30072-S Viper The All New Free Fall Setting New Standards In Anchoring! The New Viper S Series (patent pending) GRAVITY FEED was developed by Bell Marine. After 3 years of R&D and 2 years of ﬁeld testing the Viper Gravity Feed has now proven itself to be a serious contender in the high performance anchoring arena. Our home grown mechanical freefall gives you the peace of mind, reliability, and performance not found in free spooling winches. The all-new all-stainless steel Gravity Feed was designed without any additional electronics, wiring or solenoids that can be the downfall in harsh boating environments. The new drop speed will ensure your anchor hits the bottom exactly where you want it, when you want it. At the touch of a switch, the Viper Gravity Feed winch controls the drop speed to ensure no over spooling (can be set to match the size of your anchor), yet giving you ultimate speed and allowing you to get on to your GPS mark, FIRST TIME, EVERY TIME !! If you are anchoring in deep water the new Gravity Feed winch is for you - its quiet and efﬁcient operation also conserves your battery and runs at up to 4 times faster than some drum winches using our mechanical patented design. If you require high performance anchoring then this is the one for you.

You Can’t Avoid Gravity! 138Mtrs Per Minute 68 Freefall Winch Fall Rate TECHNICAL SPECIFICATIONS IP IMMERSION PROOF

265mm 34mm 5 YEAR WARRANTY

290mm

430mm

INCLUDED IN THE VIPER “S” SERIES GRAVITY FEED 1000 BUNDLE: *INCLUDED at No Extra Cost* 360mm VIPER S SERIES GRAVITY FEED 1000 ELECTRIC DRUM ANCHOR WINCH 30072-6S 237mm VIPER S SERIES STAINLESS STEEL WORM DRIVE MARINE GEARBOX SUPPLIED WITH 1 MTR 3 B&S POWER LEADS & JOINING CONNECTORS PRESSURE TESTED & SEALED 90MTRS OF 6MM DOUBLE BRAID ROPE 30032 30020 SPLICED TO 8 MTRS OF 6MM GALVANISED SHORT LINK ANCHOR CHAIN 90109 30001 VIPER PRO SERIES ANCHOR SWIVEL SMALL 30001 VIPER DELUXE ANCHOR ROLLER SMALL 30009 200AMP REVERSING SOLENOID 30020 ELITE SERIES STAINLESS STEEL UP/DOWN SWITCHES 90109 100 AMP FLUSH MOUNT CIRCUIT BREAKER WITH RUBBER SEAL 30046 30032 30009 30046

120mm

ALL REQUIRED INSTALLATION 5MM STAINLESS STEEL SANDWICH PLATE HARDWARE ALL FIXING HARDWARE + INSTALLATION NOTES & WIRING DIAGRAM MAX FALL RATE: 138MTRS PER MINUTE MAX RETRIEVAL RATE: 45MTRS PER MINUTE 80mm PACKAGING: WINCH BOX: 46 X 45 X 35 CM 23KG SUIT VESSEL LENGTH: 5.7 MTRS + ROPE KIT: 27 X 27 X 25 CM 9KG WEIGHT: 23KGS WINCH BUNDLES:

120mm 30072-6S VIPER GRAVITY FEED S SERIES WINCH BUNDLE 98MTRS 6MM B/D ROPE/CHAIN 30072-5S VIPER GRAVITY FEED S SERIES WINCH BUNDLE 183MTRS 5MM ROPE/CHAIN

OPTIONS:

4 30021-A ALLOY FITMENT KIT FOR ALUMINIUM BOAT INSTALLATIONS 2

30036 BLACK 10MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN 30036G FLURO GREEN 10MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN

90Ø 30023 316 S/S CAST HAWSE PIPE FOR TRICKY INSTALLATIONS 30006 SINGLE ROLLER VIPER BOW ROLLER SELF-LAUNCHING 30016 DELUXE 3 ROLLER VIPER BOW ROLLER- SELF LAUNCHING 30034 CUSTOM MADE MARINE WIRING LOOM BOATS UPTO 6MTRS

138mm 30035 CUSTOM MADE MARINE WIRING LOOM BOATS UPTO 8MTRS 30061 CUSTOM MADE WIRING LOOM MADE TO YOUR SPECIFICATIONS SUIT ANY LENGTH BOAT 30073 OPTIONAL WIRELESS REMOTE CONTROL FOR VIPER WINCHES - 30 METRE RANGE

E & O E

E.SPECIFICATIONS & O. E. MAY VARY OR CHANGE WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES 4 SPECIFICATIONSWITHOUT NOTICE MAY VARY OR CHANGE WORLD CLASS STAINLESS STEEL CHANDLERY & PERFORMANCE BOATING ACCESSORIES WITHOUT FURTHER PART NO. PRO SERIES II 1500/2500 ANCHOR WINCH BUNDLE 30003 Viper Designed for Larger Vessels & Commercial Applications The Pro Series II 1500W series anchor winch is the most powerful in our range and is designed for commercial and large vessel installations from 8mtrs plus. The 1500 has a huge rope capacity of up to 200mtrs of 6mm double braid or 100mtrs of 8mm triple strand rope spliced to 10mtrs of 8mm short link chain making anchoring in deep water a breeze, and is powerful enough to haul up a 37lb plough anchor all day. The Viper 1500/2500 is also our fastest power up/down drum winch, with a fall rate of 55mtrs per minute, includes our famous 5 year Viper warranty. Now available in a 2500w 24V version. If you take your boating seriously or have a commercial application then you can’t go past the Viper Pro Series II 1500! Take the Viper challenge today and join the thousands of satisﬁed customers. Dependable, Fast & Built To Last! Dependable, Fast & Built To Last! 5 Mtrs More Power, More Speed & More Torque YEAR Per55 Minute WARRANTY Fall Rate

TECHNICAL SPECIFICATIONS

1500W BUNDLE INCLUSIONS VIPER PRO SERIES II 1500 ANCHOR WINCH 30003 SUPPLIED WITH 1 MTR 3 B&S POWER LEADS & JOINING CONNECTORS 100MTRS OF 8MM 3 STRAND PREMIUM ROPE 30026 SPLICED TO 10 MTRS OF 8MM GALVANISED SHORT LINK ANCHOR CHAIN *INCLUDED at no Extra Cost* VIPER PRO SERIES ANCHOR SWIVEL LARGE 30019 VIPER DELUXE ANCHOR ROLLER LARGE 30002 400AMP REVERSING SOLENOID 30024 30051 30052 LED ILLUMINATED MARINE ROCKER SWITCH 90021 VIPER LASER ETCHED LED ILLUMINATED SWITCH COVER 90046 135 AMP FLUSH MOUNT CIRCUIT BREAKER WITH RUBBER SEAL 30025 30046 SINGLE LED SWITCH STAINLESS STEEL FACE PLATE 30051 90021 30019 COMBO LED SWITCH & CIRCUIT BREAKER S/S FACE PLATE 30052 5MM STAINLESS STEEL SANDWICH PLATE ALL FIXING HARDWARE INSTALLATION NOTES & WIRING DIAGRAM MAX FALL RATE: 55MTRS PER MINUTE MAX RETRIEVAL RATE: 46MTRS PER MINUTE SUIT VESSEL LENGTH: 8 MTRS + 30026 30002 30024 MAX LOAD: 360KGS WEIGHT: 28KGS PACKAGING: 1500 DRUM & HOUSING 53 X 38 X 39CM 21KG 1500 WINCH MOTOR 50 X 23 X 27CM 13KG ALL REQUIRED INSTALLATION ROPE AND CHAIN KIT 32 X 32 X 34CM 20KG HARDWARE IS SUPPLIED! WINCH BUNDLES: 30003-6 VIPER PRO SERIES 1500 WINCH BUNDLE 200M D/BRAID ROPE KIT 30003-8 VIPER PRO SERIES 1500 WINCH BUNDLE 100M 3 STRAND ROPE KIT 30004-6 VIPER PRO SERIES 2500 24V BUNDLE 200M D/BRAID ROPE KIT 30004-8 VIPER PRO SERIES 2500 24V BUNDLE 100M 3 STRAND ROPE KIT OPTIONS: 30003-A ALLOY FITMENT KIT FOR ALL ALUMINIUM BOAT INSTALLATIONS 30037 12MTRS OF CHAIN SOCK TO SUIT 8MM SHORT LINK CHAIN 30031 LARGE HAWSE PIPE FOR TRICKY INSTALLATIONS 30006 SINGLE ROLLER VIPER BOW ROLLER SELF-LAUNCHING 30007 DELUXE 3 ROLLER VIPER BOW ROLLER- SELF LAUNCHING - LARGE 30060 CUSTOM MADE MARINE WIRING LOOM FOR 1500 WINCH FOR BOATS UP TO 9MTRS 30073 WIRELESS REMOTE CONTROL 30M

E & O E SPECIFICATIONS MAY VARY OR CHANGE 5 WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES WITHOUT NOTICE PRO SERIES ANCHOR WINCH ACCESSORIES Viper Designed and Built By Bell Marine

Viper PRO SERIES DELUXE STAINLESS STEEL BOW ROLLERS 30016 - W72 X L370 X H210mm 30007 - W95 X L500 X H260mm Gone are the days when you had to make your own bow sprit to hold your anchor. These deluxe 5mm plate stainless steel deluxe bow roller/sprits are your answer, they are guaranteed to keep your anchor secure and away from the bow of your boat. Normally these bow rollers are only found on high end European boats, but now you can add that custom look to any vessel. They include 3 high performance neoprene rollers, anchor stops, rope hoop, mounting holes and stainless steel installation bolts. Designed to ﬁt most anchors and to self-launch every time. Each bow roller is hand made and hand polished to a mirror ﬁnish!

P/N 30016 DELUXE BOW ROLLER - SMALL MOUNTING AREA 210 X 70MM - (4 X 8MM S/S BOLTS, WASHERS & NYLOC NUTS SUPPLIED) P/N 30007 DELUXE BOW ROLLER - LARGE MOUNTING AREA 300 X 95MM - (6 X 8MM S/S BOLTS, WASHERS & NYLOC NUTS SUPPLIED)

Viper PRO SERIES DELUXE SINGLE ROLLER STAINLESS STEEL BOW ROLLER Suitable for almost any design of anchor, this bow roller is perfect for boats that require a longer W85 X L510 X H190mm bow roller to keep your anchor away from your bow. The single roller reduces rope chafe, allows for free falling and correct alignment upon retrieval. Constructed from 5mm plate 316 marine grade stainless steel, hand polished to a mirror ﬁnish and guaranteed to self launch every time. Includes rope hoop, neoprene roller, mounting holes and stainless steel installation bolts. P/N 30006 DELUXE SINGLE ROLLER BOW ROLLER MOUNTING AREA 300 X 85MM - (4 X 8MM S/S BOLTS, WASHERS & NYLOC NUTS SUPPLIED))

30031 LARGE Opening W195 X H100mm Viper PRO SERIES STAINLESS STEEL HAWSE PIPES Flange W220 X D120mm Cut Out W190 X 85mm Overall Height 130mm When you just can’t use an anchor roller, if you have a separate anchor well, or perhaps you don’t want to cut up your anchor well hatch? These hand polished marine grade 316 stainless steel NEW! hawse pipes are perfect for cuddy cabs, centre consoles or bow riders with very small anchor wells. Simply ﬁt your winch either in the cabin or below the deck anywhere there is room and using the Viper hawse pipe you simply bring your rope and chain straight up through your deck and out to your bow roller - match it up with our chain sock for smooth silent winching! P/N 30023 DELUXE HAWSE PIPE - SMALL NEW! H75 X W153 X D90MM

30023 - SMALL P/N 30031 DELUXE HAWSE PIPE - LARGE Opening W90 x 55mm H130 X W220 X D120MM Flange W158 X D97mm Cut Out W120 X 65mm Overall Height 78mm Viper PRO SERIES DELUXE STAINLESS STEEL ANCHOR ROLLERS Stop your rope and chain from damaging your deck and ensure the smooth operation of your anchor winch with these deluxe 5mm plate marine grade 316 stainless steel anchor rollers. Hand polished to a mirror ﬁnish and include our high performance nylon rollers. Best suited for ﬁtment at the edge of your anchor well when installing your electric drum winch. L205 X H105 X D50mm PRO TIP: Pair with a Viper Chain Sock for some seriously silent running! L130 X H105 X D50mm P/N 30009 DELUXE ANCHOR ROLLER - SMALL L130 X H105 X D50MM P/N 30002 DELUXE ANCHOR ROLLER - LARGE L205 X H105 X D50MM

Viper PRO SERIES DELUXE ANCHOR SWIVELS 30001 - L120 x Dia 28mm, 6 & 8mm Chain 15mm Bell Marine deluxe anchor swivels are normally attached between your chain and anchor, reducing the Anchor chance of your rope and chain getting twisted and your anchor spinning on the way up and damaging Shaft your hull. The 316 stainless steel joint allows for perfect transition through your anchor rollers with no risk of damage to any components on your boat - rated to 200kgs/440lbs. 30019 - L160 x Dia 28mm, 8 to 12mm Chain

19mm P/N 30001 DELUXE ANCHOR SWIVEL - SMALL SUITS 6-8MM CHAIN Anchor P/N 30019 DELUXE ANCHOR SWIVEL - LARGE SUITS 8-12MM CHAIN Shaft

E & O E E.SPECIFICATIONS & O. E. MAY VARY OR CHANGE WITHOUT NOTICE WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES 6 SPECIFICATIONS MAY VARY OR CHANGE WORLD CLASS STAINLESS STEEL CHANDLERY & PERFORMANCE BOATING ACCESSORIES WITHOUT FURTHER NOTICE PRO SERIES ANCHOR WINCH ACCESSORIES Viper Designed and Built By Bell Marine

Viper WATERPROOF 80, 100 & 135 AMP CIRCUIT BREAKERS Combines switching and circuit breaker function all in one. Compact in size, designed to be surface mounted and protects high amperage circuits at virtually any location. Ideal for windlass, bow thrusters, winches and any high power feeds to distribution panels etc. Supplied with a flush mount rubber seal.

P/N 30018 80 AMP FLUSH MOUNT CIRCUIT BREAKER INC RUBBER SEAL P/N 30046 100 AMP FLUSH MOUNT CIRCUIT BREAKER INC RUBBER SEAL P/N 30025 135 AMP FLUSH MOUNT CIRCUIT BREAKER INC RUBBER SEAL

Viper PRO SERIES STAINLESS STEEL FLUSH MOUNT FACE PLATES

H80 X W60mm H80 X W100mm When only the best will do! Hand polished to a mirror ﬁnish these switch and combo face plates add that touch of class to your dash. Made from the highest grade 316 marine grade stainless steel & include ﬁxing screws.

P/N 30051 S/S FACE PLATE FOR LED SWITCH P/N 30052 S/S COMBO FACE PLATE FOR LED SWITCH & CIRCUIT BREAKER P/N 30070 ALUMINIUM FACE PLATE FOR LED SWITCH P/N 30071 ALUMINIUM COMBO FACE PLATE FOR LED SWITCH & CIRCUIT BREAKER

PRO SERIES UP/DOWN LED SWITCH & FACE PLATE H80 X W60mm Viper This illuminated red LED anchor rocker switch includes our own hand polished stainless steel face plate and is labelled up/down. Momentary ON/OFF/ON, 12v 20 Amp and includes anchor symbol LED indicator, flush mount - W 6cm x H 8cm

P/N 30017 LED ANCHOR SWITCH PLUS S/S FACE PLATE P/N 30039 LED ANCHOR SWITCH PLUS ALLOY FACE PLATE

Viper PRO SERIES UP/DOWN LED SWITCH & 100A CIRCUIT BREAKER + FACE PLATE H80 X W100mm Combo LED illuminated up/down switch and 100Amp circuit breaker conveniently mounted into our hand polished 316 marine grade stainless steel face plate and includes all ﬁxing hardware.

P/N 30050 LED SWITCH, 100A CIRCUIT BREAKER + S/S FACE PLATE P/N 30069 LED SWITCH, 100A CIRCUIT BREAKER + ALLOY FACE PLATE - NEW!

Viper THE ORIGINAL AND THE BEST AUST MADE CHAIN SOCK The Viper chain sock is a high tech polyester blend braid that encases your 6 or 8mm short link STOP THE CHAIN CLANG anchor chain and is the only Australian made chain guard available. NOW! How many times have you pulled up your anchor and the chain scraped your gunnel or deck? Do you fish in shallow water for species such as whiting, bream or bass? Do you have a drum winch installed on your boat? Do you have an alloy boat? If you answered yes to any of the above questions then you need a Viper Chain Sock! Protect your boat’s anchor rollers, bow sprit, winch, gel-coat, gunnel and reduce spooking the fish while anchoring which increases your chances of landing fish...... so order now! P/N 30053 BLACK CHAIN SOCK TO SUIT 6MM SHORT LINK CHAIN 8MTRS P/N 30053G FLUORO GREEN CHAIN SOCK TO SUIT 6MM SHORT LINK CHAIN 8MTRS P/N 30036 BLACK CHAIN SOCK TO SUIT 6MM SHORT LINK CHAIN 10MTRS P/N 30036G FLUORO GREEN CHAIN SOCK TO SUIT 6MM SHORT LINK CHAIN 10MTRS P/N 30036A BLACK CHAIN SOCK TO SUIT 6MM SHORT LINK CHAIN - 100MTR ROLL 100MTRS P/N 30037 BLACK CHAIN SOCK TO SUIT 8MM SHORT LINK CHAIN 12MTRS P/N 30037A BLACK CHAIN SOCK TO SUIT 8MM SHORT LINK CHAIN - 100MTR ROLL 100MTRS

Note: 30053, 30053G, 30036 & 30036G are designed for 6mm shortlink anchor chain. 30037 is designed for 8mm shortlink anchor chain. Recommended you buy 1-2m longer then your chain to ﬁt correctly

E & O E SPECIFICATIONS MAY VARY OR CHANGE 7 WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES WITHOUT NOTICE PRO SERIES ANCHOR WINCH ACCESSORIES Viper Designed and Built By Bell Marine

Viper PRO SERIES ROPE AND CHAIN KITS All our Viper rope and chain kits have been selected for their quality, blend and performance attributes and are best suited for drum winches. Viper 3 strand, double braid & UHMWPE Spectra ropes are a blend of the world’s finest strands and will ensure they lay perfectly onto your drum winch. Ropes are tested for breaking strain in-house and with the right care will last for many many years. Rope kits are pre-spliced and the chain is wound onto the drums first so installation on to your drum winch is a breeze! Don’t forget to add a chain sock to protect your boat’s gelcoat, for absolutely silent anchor winch operation and your chain also won’t spook the fish for miles around when it goes over your bow roller! 8mm 3 Strand Premium Blend Anchor Rope Kits P/N 30010 75MTRS 8MM SPLICED TO 8MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN 83MTRS 1000KG BREAKING STRAIN P/N 30026 100MTRS OF 8MM SPLICED TO 10MTRS OF 8MM SHORT LINK GAL ANCHOR CHAIN 110MTRS 1000KG BREAKING STRAIN 6mm Double Braid Premium Blend Anchor Rope Kits P/N 30045 60MTRS OF 6MM SPLICED TO 6MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN 66MTRS 1000KG BREAKING STRAIN P/N 30032 90MTRS 6MM SPLICED TO 8MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN 98MTRS 1000KG BREAKING STRAIN P/N 30022 100MTRS OF 6MM SPLICED TO 8MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN 108MTRS 1000KG BREAKING STRAIN P/N 30027 200MTRS OF 6MM SPLICED TO 10MTRS OF 8MM SHORT LINK GAL ANCHOR CHAIN 210MTRS 1000KG BREAKING STRAIN 100% 12 Plait UNMWPE Fibre with Polyeurethane Coating Anchor Rope Kits P/N 30056 100MTRS OF 4MM HI SPEC 3000 ROPE SPLICED TO A 3 STRAND 10MTR SHOCK CORD PLUS 6MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN - 116MTRS -1550KG B/STRAIN P/N 30059 165MTRS OF 5MM HI SPEC 3000 ROPE SPLICED TO A 3 STRAND 10MTR SHOCK CORD PLUS 8MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN - 183MTRS - 2050KG B/STRAIN P/N 30057 200MTRS OF 5MM HI SPEC 3000 ROPE SPLICED TO A 3 STRAND 10MTR SHOCK CORD PLUS 8MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN - 218MTRS - 2050KG B/STRAIN Short Link Galvanized Anchor Chain P/N 30055 6MM SHORTLINK HOT DIPPED GALVANISED ANCHOR CHAIN - SOLD PER METRE P/N 30058 8MM SHORTLINK HOT DIPPED GALVANISED ANCHOR CHAIN - SOLD PER METRE Viper MARINE GRADE TINNED COPPER WINCH LOOMS 3 B&S CABLE Bell Marine custom wiring looms are individually hand made and fully tested to suit most boats. We only used the highest grade tinned copper wire (3B&S), silicon impregnated heat shrink, tinned copper marine lugs and every connection is clearly labeled making it a breeze to fit your winch. Simply connect A to A and B to B and you dont even have to refer to your installation instructions.

P/N 30034 VIPER MARINE WINCH LOOM TO SUIT BOATS UP TO 6MTRS FOR (MICRO/RAPID WINCHES) Positive Cable Lengths: Negative Cable Length Battery to Circuit Breaker: 4.5M Battery to Solenoid: 5.5M Circuit Breaker to Solenoid: 1.0M Solenoid to Winch Motor: 2.5M Solenoid To Winch Motor: 2.5M Switch Looms are 1.5M in length

P/N 30035 VIPER MARINE WINCH LOOM TO SUIT BOATS UP TO 8MTS FOR (MICRO/RAPID WINCHES) Positive Cable Lengths: Negative Cable Lengths Battery to Circuit Breaker: 5.8M Battery to Solenoid: 6.8M Circuit Breaker to Solenoid: 1.5M Solenoid to Winch Motor: 3.2M Solenoid To Winch Motor: 3.2M Switch Looms are 1.5M in length P/N 30060 VIPER CUSTOM MARINE WINCH LOOM FOR VIPER 1500/2500 WINCH (LOOM FORM REQUIRED) P/N 30061 VIPER CUSTOM MARINE WINCH LOOM FOR ALL OF THE 1000W WINCHES (LOOM FORM REQUIRED) P/N 90043 BLACK 3B&S TINNED COPPER CABLE - 25MM2 - SOLD PER METRE P/N 90044 RED 3B&S TINNED COPPER CABLE - 25MM2 - SOLD PER METRE

Viper MARINE GRADE HEAT SHRINK Our heavy duty marine grade silicone impregnated heat shrink will ensure that your cabling is watertight and minimises any chance of corrosion or bad connections in your loom. P/N 90062 RED SILICONE IMPREGNATED HEAT SHRINK - 20MM FOR 3B&S CABLE - SOLD PER METRE P/N 90063 BLACK SILICONE IMPREGNATED HEAT SHRINK - 20MM FOR 3B&S CABLE- SOLD PER METRE

E & O E 8 WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES SPECIFICATIONS MAY VARY OR CHANGE WITHOUT NOTICE WORLD CLASS STAINLESS STEEL CHANDLERY & PERFORMANCE BOATING ACCESSORIES PRO SERIES ANCHOR WINCH ACCESSORIES Viper Designed and Built By Bell Marine

Viper PRO PRO SERIES SERIES ALLOY ALLOY BOAT BOAT FITMENT FITMENT KIT KIT As the production of alloy boats increases, more and more winches are being fitted to aluminium run abouts and Pro Series boats. The biggest problem with fitting a full stainless steel winch or any stainless fitting to an aluminum boat is the reaction between the 2 different metals in a salt water environment causing electrolysis. Our factory designed fitment kit makes it a breeze to install to and Aluminium boat, it saves the mess of silicon everywhere, it saves time, and saves you money.

The Alloy ﬁtment kit includes 2 specially designed plastic winch sandwich plates, anchor roller insulation plate, insulation spacers for each bolt and even includes an aluminium switch face plate. Highly recomended for every aluminium boat!!

P/N 30038-A ALUMINIUM FITMENT KIT TO SUIT VIPER S SERIES 1000 MICRO WINCH P/N 30021-A ALUMINIUM FITMENT KIT TO SUIT VIPER S SERIES 1000 RAPID WINCH P/N 30003-A ALUMINIUM FITMENT KIT TO SUIT VIPER PRO SERIES II 1500/2500 WINCH

Viper MARINE GRADE REVERSING SOLENOIDS These 12V marine grade reversing solenoids have the grunt to power Viper 800/1000 & 1500 winches and can be used for many other applications. Designed for marine applications. 3 switch connectors and 4 power terminals.

P/N 30020 200 AMP REVERSING SOLENOID P/N 30024 400 AMP REVERSING SOLENOID

E & O E SPECIFICATIONS MAY VARY OR CHANGE E. & O. E. WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES 9 WITHOUT NOTICE SPECIFICATIONS MAY VARY OR CHANGE WITHOUT FURTHER NOTICE WORLD CLASS STAINLESS STEEL CHANDLERY & PERFORMANCE BOATING ACCESSORIES PRO SERIES REMOVABLE BAIT/SERVING STATIONS Viper Designed and Built By Bell Marine

1000mm Viper PRO SERIES DELUXE FIBREGLASS REMOVABLE BAIT BOARD 10005 At long last a fibreglass bait board with gel coat top & bottom that you can completely remove when not 380mm required! This convenient drop in and lift out deluxe bait board is manufactured from premium fibreglass Made using 32mm 316 S/S tube with welded ends! with a gloss white gel coat finish top and bottom to complement your boat. Our cutting boards are (no more plastic end caps) NEW! constructed from Australian made high density plastic which is abrasion resistant, whilst still retaining your knife edge and is UV stabilized (replacements available). Included are two (2) integrated cup holders, a large storage/bait compartment, 2 game rated deluxe 30 degree rod holders and a drain plug with 1 metre of reinforced clear drain hose. Two (2) 38mm X 420mm stainless steel baitboard legs, two (2) 38mm stainless steel deck fittings and all required installation hardware are also supplied. Don’t forget about our optional 6 way double wire or half tube rod rack (P/N 10005 / 10018) so you can keep an eye on all your rods from the comfort of your helm chair!

“Included with every bait board”

SPECIFICATIONS: CONSTRUCTION: TWIN SKIN FIBREGLASS WITH GEL COAT TOP & BOTTOM, HAND CUT AND POLISHED LEGS & MOUNTS: 38MM X 420MM 316 MARINE GRADE STAINLESS STEEL LEGS HINGES: 2 X 25MM 316 MARINE GRADE STAINLESS STEEL 50010 “Included with every bait board” ROD HOLDERS 2 X GAME RATED 30 DEGREE ROD HOLDERS INC RUBBER SLEEVES & CAPS WASTE: PLASTIC SKIN FITTING, S/S HOSE CLAMP & 30MM X 1MTR REINFORCED CLEAR DRAIN HOSE STORAGE: BAIT/STORAGE COMPARTMENT W 440 X L 300MM X D 90MM CUTTING BOARD: NON ABRASIVE HIGH DENSITY PLASTIC ROD RACK: OPTIONAL - 6 WAY DOUBLE WIRE 316 MARINE GRADE STAINLESS STEEL 30MM TUBE DIMENSIONS: W 850MM X D 450MM X H 100MM PACKAGING: W 920MM X D 520MM X H 270MM WEIGHT: 19KG P/N 50001 DELUXE FIBREGLASS REMOVABLE BAIT BOARD 50004 P/N 50003 COMBO REMOVABLE BAIT BOARD + 6 WAY ROD RACK P/N 50004 STAINLESS STEEL TOWEL RAIL P/N 50005 REMOVABLE BAIT BOARD LEGS & FITTINGS Optional P/N 50010 38MM FEMALE DECK FITTINGS (SOLD IN PAIRS) Slimline Towel Rail P/N 10005 DOUBLE WIRE 6 WAY STAINLESS STEEL ROD RACK P/N 10018 HALF TUBE 6 WAY STAINLESS STEEL ROD RACK

Viper PRO SERIES DELUXE STAINLESS STEEL REMOVABLE BAIT BOARD Our convenient drop in and lift out removable deluxe stainless steel bait board is manufactured from 316 marine grade stainless steel. Complement your boat’s other stainless steel fittings, with our hand polished mirror finish bait board. Cutting surface is resistant to abrasions whilst retaining your knife edge. Features include 2 stainless steel rod holders with plastic end caps to protect your rods, and a large stainless steel bait/storage compartment under the cutting board. Also included are 2 x 38mm x 420mm length legs and fittings. Compact in size and completely removable when not in use, it’s the ideal fisher- man's companion. The new improved Viper version allows you to attach the legs on the bait board in almost any position so it can be fitted into your desired location. Now with perforated s/s splash back to stop your knifes and bait from going overboard. SPECIFICATIONS: BAIT BOARD: MARINE GRADE STAINLESS STEEL FULLY WELDED - HAND POLISHED LEGS AND MOUNTS: 38MM X 420MM 316 MARINE GRADE STAINLESS STEEL ROD HOLDERS: 51MM STAINLESS STEEL ROD HOLDERS WITH RUBBER CAPS STORAGE: BAIT/STORAGE COMPARTMENT W 450 X D 100MM X H 100MM CUTTING BOARD: W 470MM X L 330MM PACKAGING: W 920MM X D 520MM X H 270MM DIMENSIONS: W 620MM X D 380MM X H 250MM WEIGHT: 11KG

P/N 50002 REMOVABLE STAINLESS STEEL BAIT BOARD

E & O E SPECIFICATIONS MAY VARY OR CHANGE E.WITHOUT & O. E. NOTICE WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES 10 SPECIFICATIONS MAY VARY OR CHANGE WITHOUT FURTHER NOTICE SEAT BASES & TACKLE BOXES Viper Designed and Built By Bell Marine

Viper PRO SERIES STAINLESS STEEL TACKLE STORAGE LOCKER

420MM Our Viper flush mount marine grade 316 stainless steel tackle locker is 100% seam Included! welded, linished and hand polished to a mirror ﬁnish and ideal for storing your tackle such as lures, sinker, hooks, knifes etc keeping your deck free of any hazards. Comes complete with 7 plastic tackle boxes with dividers which you can set up as per your 330MM requirements. They can be reversed so door can open left or right and comes with stainless steel pull handle & key-lock. Now by popular demand we have also manufactured a matching stainless lockable hatch or compartment door. Add the S/S hatch to the side of your boat or into the second seat base for extra storage space. 265MM Cut Out Dimensions: W 385MM X H 295MM

P/N 80022 STAINLESS STEEL TACKLE LOCKER INC 7 TACKLE BOXES

NEW! PRO SERIES STAINLESS STEEL FLUSH MOUNT ACCESS HATCH Matching Viper S/S Hatch At long last a stainless steel storage hatch that is fully welded, hand polished to a mirror nish and is reversible so it opens to the left or right hand side. Take advantage of the space in your boat for storage in your cabin, cockpit or shing area and it matches our tackle locker #80022. Hand made from 316 marine grade stainless steel to give your that custom look and it will last the test of time. Also includes lock, 2 keys and all the hardware to install it. Ideal for life jacket storage and much much more!

Dimensions: W 420mm H 330mm

Cut Out Size: W 380mm H 290mm

P/N 80028 STAINLESS STEEL FLUSH MOUNT ACCESS HATCH - SUITS 80022

Viper PRO SERIES COMBO SEAT BASE S/S TACKLE STORAGE LOCKER 490MM

Included! The ultimate seating combo/storage for your boat. Includes the Famous Viper Pro Series deluxe ﬁberglass seat base and the top of the range stainless steel tackle locker 480MM with 7 different compartments. Simply add your seat or swivel seat base and you should be sitting at right comfortable height to take control of the helm and have your worldly belongings locked away under your seat! Don't forget the matching S/S storage hatch P/N 80028 for life jackets, safety gear or valuables anywhere you have room or under your second seat base! Insist on Viper for your boat for that ultimate in bling and it’s built to last the test of time!

485MM Packaging: 52 x 52 x 52cm - 19kgs

P/N 80023 VIPER PRO SERIES COMBO SEAT BASE & STAINLESS STEEL TACKLE LOCKER

Viper PRO SERIES DELUXE FIBERGLASS SEAT BASE Constructed from the high grade fiberglass and finished in gloss white gel coat to match your boat perfectly, these bases bolt directly to your floor and have a solid top ready to bolt your seat base or swivel base directly to. Each seat base is individually hand cut and polished, to ensure the highest gloss white gel coat finish available, and will compliment your boat - Take the Viper challenge today!

Packaging: 52 x 52 x 52cm - 9kgs

P/N 80021 VIPER PRO SERIES DELUXE FIBERGLASS SEAT BASE

E & O E SPECIFICATIONS MAY VARY OR CHANGE 11 WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES WITHOUT NOTICE by BELL MARINE REMOVABLE TELESCOPIC OUTRIGGERS & ACCESSORIES VIPERtreme XoUTRIGGERS Designed and Built By Bell Marine

by BELL MARINE NEW treme REMOVABLE 3 STAGE TELESCOPIC OUTRIGGER BUNDLE VERSION! XVIPERoUTRIGGERS Viper Xtreme Outriggers just got better with our new Xtreme Series, improvements making them bullet- proof! Viper Outrigger bases are now ﬁtted with heavy-duty commercial stainless steel bearings to ensure smooth operation in any weather condition. Our new Xtreme outrigger poles are also spring loaded for ease of use.

With 180 degree rotation bow to stern, 90 degree vertical adjustment with improved heavy duty spring-loaded stainless steel locking pins, there is no need to remove your poles and align splines to set your outriggers into position!

The new Viper Extreme Series Outriggers are removable when not in use and the collapsible telescopic poles make for easy storage, and are also rated to handle the tough game applications. They can be deck, cabin, hard top or side mounted onto your rocket launcher and are fully adjustable without having to ﬁght spline alignment - just lift the spring loaded stainless steel pins. The bases are constructed from 316 marine grade cast stainless steel.

P/N 80002 DECK MOUNT REMOVABLE TELESCOPIC OUTRIGGER BUNDLE (PAIR) 80001 P/N 80013 SIDE MOUNT TELESCOPIC OUTRIGGER BUNDLE (PAIR) P/N 80014 SIDE MOUNT OUTRIGGER BASES WITH MOUNTING HARDWARE (PAIR) P/N 80015 OUTRIGGER BUNGEE CORDS INC S/S PULLEYS AND CLIPS (PAIR) P/N 80001 REMOVABLE DECK MOUNT BASES WITH MOUNTING HARDWARE (PAIR) P/N 80008 TAG RETURN WEIGHTS (SOLD IN PAIRS) P/N 80010 OUTRIGGER LINE KIT - (LINES, BUNGEE CORDS & QUICK RELEASE CLIPS) P/N 80009 TELESCOPIC OUTRIGGER POLES ONLY (PAIR) P/N 80026 QUICK RELEASE ADJUSTABLE TENSION LINE CLIPS (PAIRS) P/N 80027 DECK FITTING FOR OUTRIGGER BASES WITH WEATHER PROOF CAPS

TELESCOPIC 3 STAGE OUTRIGGER POLES WITH SPRING LOADED S/S LOCKING PINS Included with each bundle! 180 DEGREE ROTATION BOW TO STERN 90 DEGREE VERTICAL POSITIONING UP/DOWN 8MM CAST 316 STAINLESS STEEL HAND POLISHED BASES SPRING LOADED STAINLESS LOCKING PINS MATTE BLACK UV STABILIZED 3 STAGE POLES 4.876 METERS (16FT) EXTENDED, 2 METERS (6.5 FT) RETRACTED LINES, CLIPS & PULLEYS INC 80014 PAIR OF TAG RETURN WEIGHTS SANDWICH PLATES AND FIXING HARDWARE

Now with spring-loaded 80010 TAKES 41MM POLES S/S locking pins! 88MM DIA BASE 80026 80008 80015 51MM DIA CUT OUT 80027 5 YEAR WARRANTY

Viper SHOT GUN/OUTRIGGER BASES These Viper Shot Gun/Outrigger bases are constructed from 316 marine grade stainless steel and are designed for ease of use, less moving parts, making them a set and forget type of base. These bases swivel

NOW IN MATTE BLACK NOW IN MATTE 360 degrees plus multiple vertical settings which enables a multitude of mounting options to get the perfect trolling height and angle for your poles.

The mounting plate is permanently bolted to the deck or cabin top of your boat using 4 bolts, and with 2 different ID sizes, these bases should suit nearly all Shot Gun/Outrigger poles on the market. P/N 80003 DECK MOUNT MULTI DIRECTIONAL SHOT GUN/OUTRIGGER BASE (40mm ID) - SOLD EACH 80009 P/N 80004 RAIL MOUNT MULTI DIRECTIONAL SHOT GUN BASE (43mm ID) - SOLD EACH P/N 80005 DECK MOUNT TRI POSTION SHOT GUN/OUTRIGGER BASE (43mm ID) - SOLD EACH

80003 80004 80005

E & O E SPECIFICATIONS MAY VARY OR CHANGE WITHOUT NOTICE WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES 12 PRO SERIES ROD HOLDERS Viper Designed and Built By Bell Marine

Viper PRO SERIES DELUXE GAME RATED 316 S/S ROD HOLDERS Available in 0 & 30 degrees these heavy duty cast 316 marine grade stainless steel game rated rod holders are fully welded, hand polished to a mirror finish and are strong enough to hold your most precious game rods. They have heavy duty gimble pins and solid wall thickness (1.5 x 48mm). The 0 degree version is ideal for your bent butt game rods (as used in the USA) let the boat hold the rod, so you can focus on the fight, rather than breaking your back using a gimble belt! They come with rubber inserts with caps to stop water getting into your boat. Viper 5 Year Warranty GAME RATED! P/N 10001 DELUXE GAME RATED 316 STAINLESS STEEL ROD HOLDERS 30° P/N 10008 DELUXE GAME RATED 316 STAINLESS STEEL ROD HOLDER 0° NEW! Viper PRO SERIES DELUXE SLIMLINE 316 S/S GAME RATED ROD HOLDERS Finally a slimline 316 stainless steel rod holder that is game rated! Laser cut tops from 5mm plate 316 stainless steel, 1.5mm tube wall thickness and fully welded, linished and hand polished to a mirror finish. Includes fully welded heavy duty gimble pins and will complement any boat with a custom look design. 5mm plate available in 0° and 30° versions (15° 3mm) Viper 5 Year Warranty P/N 10010 DELUXE SLIMLINE GAME RATED ROD HOLDERS 30° RRP $49 P/N 10009 DELUXE SLIMLINE GAME RATED ROD HOLDER 15° P/N 10011 DELUXE SLIMLINE GAME RATED ROD HOLDER 0° GAME RATED! NEW! Viper PRO SERIES DELUXE 316 S/S SIDE MOUNT COAMING ROD RACK Now available In Single, Double, 4, 6 & 8 Way Versions! Sick of your lines tangling, rods getting damaged, stood on and broken? These deluxe side mount 75mm between rod holders coaming rack rod holders, simply bolt to the side of your boat and no matter how rough it gets your rods & passengers are safe! The Viper deluxe version has rolled bottoms, the mounting bar is 10mm square tube with fully welded gimble pins to stop your rods from spinning and damaging your gelcoat, complete with hardened plastic end caps to protect your rod butts! 5 Year Warranty 1 Way - L 110 mm P/N 10025 DELUXE SIDE MOUNT COAMING ROD RACK - SINGLE 2 Way - L 190 mm 4 Way - L 450 mm P/N 10024 DELUXE SIDE MOUNT COAMING ROD RACK - DOUBLE 6 Way - L 710 mm P/N 10015 DELUXE SIDE MOUNT COAMING ROD RACK - 4 WAY 8 Way - L 990 mm P/N 10021 DELUXE SIDE MOUNT COAMING ROD RACK - 6 WAY P/N 10031 DELUXE SIDE MOUNT COAMING ROD RACK - 8 WAY - IDEAL FOR THE MAN CAVE

Viper PRO SERIES MULTI-DIRECTIONAL SINGLE ROD HOLDERS NEW! Now you can fish any tide, current and any wind with our deluxe multi-directional single rod holders. Fish from any rod holder on your boat including sides, front and rear as these are fully 0 GAME RATED! adjustable and available in 2 versions, 1/2 tube and full tube rod holders. They will rotate 360 and angle 900 up/down to ensure your rods are always in the correct position. Ideal for trawling lures and can be used in the same manner as outrigger poles using your own fishing rods...... 5 YEAR Warranty. New heavy duty game rated version & now includes a lanyard mounting point P/N 80006 MULTI DIRECTIONAL FULL TUBE SINGLE ROD HOLDER P/N 80007 MULTI DIRECTIONAL CAST HALF TUBE SINGLE ROD HOLDER Ideal for trolling lures on lakes, rivers & offshore Viper PRO SERIES DIY DELUXE 316 STAINLESS STEEL ROD CHIMNEYS Ever thought about making your own custom rocket launcher, coaming rack, couple of extra rod holders in certain positions, or just want a custom rod rack for the man cave? Well now you can with these thick walled 316 marine grade stainless steel rod holder chimneys, hand polished to a mirror finish, with rolled bottoms, welded gimble pins to stop your rods spinning, and plastic tops to protect your rod butts and reels. They can be either bolted or welded to basically anything without it costing you a fortune in fabrication.

P/N 10023 VIPER PRO SERIES DIY STAINLESS STEEL ROD HOLDER/CHIMNEY INCLUDING ABS PLASTIC END CAP TO PROTECT YOUR RODS (L 250MM X O/D 51MM)

E & O E SPECIFICATIONS MAY VARY OR CHANGE 13 WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES WITHOUT NOTICE PRO SERIES ROD HOLDERS & ACCESSORIES Viper Designed and Built By Bell Marine

NEW! Version Viper PRO SERIES REMOVABLE 10-WAY CORNER ROD HOLDERS 550mm 550mm The easiest DIY corner rod racks to ever hit the market! Now in two versions one is supplied with tapered legs that fit into your existing 300 rod holders at the rear of your boat, and the other version is with straight legs and fittings, which can be located in almost any position. P/N 10030 Both version are supplied with 6 legs, 2 or 4 deck fittings and are completely removable when 25mm S/S tube with not required. The new version has s/s welded tube ends instead of plastic caps and now with welded s/s end caps 250mm the new slimline rod holders, slightly more narrower to secure your rods. Now you can fish 10 rods, keep an eye on all rods at once and have your family and friends in the boat without tripping over rods and tackle. Each rod holder is a double wire construction to secure your valuable rods and are made from hand polished 316 marine grade stainless steel. Includes both port and starboard sides - installation time approx 60 minutes. P/N 10016 P/N 10030 REMOVABLE UNIVERSAL 10 WAY CORNER ROD HOLDERS WITH STRAIGHT LEGS INC 4 DECK FITTINGS BOTH LEFT AND RIGHT SIDES INCLUDED Pictured with 300 tapered leg P/N 10016 REMOVABLE UNIVERSAL 10 WAY CORNER ROD HOLDERS WITH 2 TAPERED LEGS for exisiting rod holders INC 2 DECK FITTINGS BOTH SIDES SUPPLIED P/N 10019 VIPER PRO SERIES 25MM DECK FITTING FOR CORNER ROD HOLDER - EACH

Viper PRO SERIES UNIVERSAL D.I.Y. REMOVABLE 6 WAY ROD RACK 1120 mm Adjustable DIY 6-way rod rack gives you the flexibility to position the legs anywhere you want along the the 32mm 316 stainless steel horizontal bar, which includes 6 double wire rod holders pre-welded into position. Ideal for a custom ﬁt to an existing bait board, pre-installed rod holders or a tight narrow gunnel, all you have to do is sit the legs into position and mark the top NEW! bar and take them into your local fabricator to weld the legs into position. We are happy to weld them into place for you if a local fabricator is not available, please allow 14-21 days.

P/N 10032 UNIVERSAL D.I.Y. REMOVABLE 6-WAY ROD RACK P/N 10033 CUSTOM WELDING FOR LEGS - DRAWING MUST BE SUPPLIED

PRO SERIES MULTI-DIRECTIONAL 3-WAY DOUBLE WIRE ROD HOLDERS NEW! Viper

These are another first by Bell Marine and are the ultimate in multi-directional 3-way rod holders. Viper Pro Series rod holders allow you to fish in any tide, any current, any wind SOLD IN PAIRS conditions and make your rod holders useable at all times, as you can set the direction by 3600 and angle your rods up and down by 90°! Hand polished to a mirror finish and constructed from 32mm tube 316 marine grade stainless steel with fully welded ends, double wire rod Adjustable holders secure your rods and include a solid cast stainless steel base to lock into your Angle gimble pins. Viper 5 YEAR WARRANTY Stainless Steel Cast Bases for added Strength! P/N 10004W MULTI-DIRECTIONAL 3 WAY DOUBLE WIRE ROD HOLDERS (PAIR)

PRO SERIES MULTI-DIRECTIONAL 3-WAY HALF TUBE CAST ROD HOLDERS NEW! Viper These are another first by Bell Marine and are the ultimate in multi-directional 3-way rod holders. Viper Pro Series rod holders allow you to fish in any tide, any current, any wind conditions and makes your rod holders useable at all times, as you can set the direction by 360 0 and angle your rods up and down by 90°! Hand polished to a mirror finish and Adjustable Angle constructed from 32mm 316 marine grade stainless steel tube, fully welded ends, full tube cast rod holders secure your rods and includes solid cast stainless steel base to lock into SOLD IN PAIRS your gimble pins with our famous Viper 5 YEAR WARRANTY

Stainless Steel Cast P/N 10004T MULTI DIRECTIONAL 3 WAY CAST HALF TUBE ROD HOLDERS (PAIR) Bases for added Strength!

E & O E SPECIFICATIONS MAY VARY OR CHANGE E.WITHOUT & O. E. NOTICE WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES 14 SPECIFICATIONS MAY VARY OR CHANGE WITHOUT FURTHER NOTICE UNIVERSAL 3 PIECE STAINLESS STEEL ROCKET LAUNCHER Viper Designed and Built By Bell Marine

Viper PRO SERIES UNIVERSAL 3 PIECE DELUXE ROCKET LAUNCHER Bell Marine’s roots are in manufacturing rocket launchers, bow rails, etc for many of the boat builders in Australia. These three piece rocket launchers are fully welded, linished and hand polished to a mirror ﬁnish. The 3 piece was developed because of the age old problem that one piece rocket launchers eventually crack at the stress points such as the top bends and where the chimneys attach etc. They are supplied with M8 eye bolts so you can fold down your rocket launcher when required and are pre-drilled for internal wiring. Ships worldwide in a convenient box.

Includes: 5 Mounting brackets for accessories such as flood lights, radio aerials, GPS aerial, etc Constructed from 25mm 316 marine grade stainless steel tube 6 Chimneys with rolled bottoms, gimble pins and plastic tops to protect your rods. Rear grab rails for passenger comfort and safety. M8 eye bolts to collapse your rocket launcher for storage. Bimini mounting rail built-in. Feet, tube ends and ﬁxing hardware supplied.

Top Width P/N 20008 - 1500MM WIDE P/N 20015 - 1700MM WIDE P/N 20016 - 1900MM WIDE 1260mm

Rocket Launcher P/N 20008 will fit boats with a windscreen width of between 1600mm and 1800mm where the windscreen meets the deck (rear) Packaging: 179cm X 21cm X 46cm - 17kg

Rocket Launcher P/N 20015 will fit boats with a windscreen width of between 1800mm and 2000m where the windscreen meets the deck (rear) Packaging: 188cm X 21cm X 46cm - 18kg

Rocket Launcher P/N 20016 will fit boats with a windscreen width of between 2000mm and 2200m where the windscreen meets the deck (rear) Adjustable Width NEW! Pre-drilled for internal wiring for that custom look P/N 20008 - 1600-1800MM WIDE SIZE Packaging: 198cm X 21cm X 46cm - 19kg P/N 20015 - 1800-2000MM WIDE P/N 20016 - 2000-2200MM WIDE

P/N 20008 UNIVERSAL 3 PIECE ROCKET LAUNCHER SMALL (W 1600 - 1800MM) P/N 20015 UNIVERSAL 3 PIECE ROCKET LAUNCHER MEDIUM (W 1800 - 2000MM) P/N 20016 UNIVERSAL 3 PIECE ROCKET LAUNCHER LARGE (W 2000 - 2200MM)

Viper PRO SERIES DELUXE HARDTOP ROCKET LAUNCHER Designed to fit most hard tops, these marine grade 316 stainless steel rocket launchers are fully welded and hand polished to a mirror finish. Includes 6 mounting brackets for all your accessories NOW WITH ADJUSTABLE plus 6 heavy duty rod holders to keep your rods safe and provisions for your internal wiring is ANGLED LEG MOUNTS! included. Add the ultimate bling to your hardtop and run all your wiring internally! Now with new mounting so they fit snug to your hardtop and the legs can be angled to suit your application.

Packaging: 145CM X 45CM X 17CM - 7KG NEW! 180CM X 45CM X 17CM - 18KG MODEL/SIZE

P/N 20007 WIDTH 1430MM P/N 20010 WIDH 1700MM OUTSIDE OF MOUNTING BRACKETS

P/N 20007 VIPER PRO SERIES HARDTOP STAINLESS STEEL ROCKET LAUNCHER - 1430MM P/N 20010 VIPER PRO SERIES HARDTOP STAINLESS STEEL ROCKET LAUNCHER - 1700MM

E & O E SPECIFICATIONS MAY VARY OR CHANGE 15 WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES WITHOUT NOTICE SWITCHES, SWITCH PANELS AND ACCESSORIES Viper Designed and Built By Bell Marine

Viper ELITE SLIMLINE SWITCHES AND SLIMLINE SWITCH PANELS Our new range of Elite Series stainless steel switches, are waterproof rated to IP67 and designed for marine use. The Elite Series switch panels are the smallest available, saving you valuable dash space, and can be mounted horizontally or vertically. Faceplates are constructed from 316 marine-grade stainless steel to last the test of time in any application and are hand polished to a mirror ﬁnish. These P/N 90106 & 90107 switches are pre-wired and can be adjusted to allow the blue LED light rings to always be on to display as convenient switch back-lighting, or they can wired to come on when you press the switch. Rated at  On/Off actuation 10AMP 9-24V.Available in: 2, 4, 6 & 8 Gang Panels. Momentary version switch panels are  On/Off momentary actuation also available. Custom switch labelling available P/N 90110  316 stainless steel face plates P/N 90108 Faceplate Dimensions P/N 90109 53 x 144mm P/N 90112  Faceplate Dimensions Waterproof to IP67 Faceplate Dimensions 53mm x 85mm  Stainless Steel Switches 80 x 113mm  Silver alloy contacts  Blue indication LED  Maximum current 10 amps  Small 19mm mounting hole

 Voltage 9-24V Custom Laser Inscribing  Pre wired P/N 90113 P/N 90111 Your Logo/Label INLINE SIDE BY SIDE Faceplate Dimensions Faceplate Dimensions  12 months warranty POA 80 x 144mm 53 x 203mm  Designed for marine use Note: Custom switch branding & labelling is available upon request POA P/N 90106 SWITCH ONLY ON/OFF  Laser Inscribed Labelling P/N 90107 SWITCH ONLY ON/OFF MOMENTARY P/N 90108 2 GANG MARINE SWITCH PANEL ON/OFF (62 x 90mm) 15 P/N 90109 2 GANG MARINE SWITCH PANEL MOMENTARY (62 x 90mm) P/N 90110 4 GANG MARINE SWITCH PANEL ON/OFF- INLINE (VERTICAL 52 X 142mm) P/N 90127 4 GANG MARINE SWITCH PANEL ON/OFF- INLINE (HORIZONTAL 52 X 142mm) 22 19 P/N 90111 6 GANG MARINE SWITCH PANEL ON/OFF- INLINE (VERTICAL 52 X 203mm) P/N 90112 6 GANG MARINE SWITCH PANEL ON/OFF - SIDE BY SIDE (VERTICAL 80 X 112mm) 39mm P/N 90121 6 GANG MARINE SWITCH PANEL ON/OFF - INLINE (HORIZONTAL 52 X 203mm) P/N 90128 6 GANG MARINE SWITCH PANEL ON/OFF - SIDE BY SIDE (HORIZONTAL 80 X 112mm) P/N 90113 8 GANG MARINE SWITCH PANEL ON/OFF - SIDE BY SIDE (VERTICAL 80 X 142mm) P/N 90120 8 GANG MARINE SWITCH PANEL ON/OFF - SIDE BY SIDE (HORIZONTAL 80 X 142mm) Viper PRO SERIES PRE-WIRED LED SWITCH PANELS WITH BUILT IN CIRCUIT BREAKERS Our rocker switch panels are vibration, shock, thermo shock, moisture & salt water resistant. Includes hidden circuit breakers, that you can press to reset. Each switch is LED illuminated on/off. Switch panels are constructed from heavy duty ABS plastic, all switch panels are pre-wired & include a rubber seal and W H mounting screws, retail blister pack 12V or 24V ready. 4 Gang Cut Out - 105 X 90mm P/N 90025 4 GANG ON/OFF SWITCH PANEL - 1x5A, 2x10A, 1x15A + 24 LABELS Overall Size - 130 X 120mm P/N 90026 6 GANG ON/OFF SWITCH PANEL - 2x5A, 2x10A, 2x15A + 24 LABELS 6 Gang Cut Out - 155 X 90mm P/N 90027 8 GANG ON/OFF SWITCH PANEL - 2x5A, 3x10A, 3x15A + 24 LABELS Overall Size - 180 X 120mm 8 Gang Cut Out - 210 X 90mm PRO SERIES MODULAR LED MARINE SWITCHES Overall Size - 235 X 120mm Viper Can’t ﬁt standard switch panels? Then make your own with these modular interlocking individual 90024 90023 90022 housings & led rocker switches. Use them on their own, or snap them together to make your own panels. Choose two end housings and as many middle housings as you require. Great for those tight spaces or if you are unsure of number of switches needed. Add switches as you add accessories, electronics, lights, pumps etc. Just snap on another switch and it will look like they were factory ﬁtted! P/N 90018 ON-OFF LED MARINE ROCKER SWITCH P/N 90019 ON-OFF MOMENTARY LED MARINE ROCKER SWITCH 90125 P/N 90020 ON-OFF-ON LED MARINE ROCKER SWITCH Pictured with switch housing fitted 90123 P/N 90021 ON-OFF-ON MOMENTARY LED MARINE ROCKER SWITCH P/N 90022 MODULAR END SWITCH HOUSING (BOTH LEFT OR RIGHT) P/N 90023 MODULAR MIDDLE SWITCH HOUSING ONLY P/N 90024 MODULAR STAND ALONE SWITCH HOUSING P/N 90123 316 STAINLESS STEEL MODULAR SWITCH FACE PLATE - 4 GANG NEW! P/N 90124 316 STAINLESS STEEL MODULAR SWITCH FACE PLATE - 6 GANG NEW! 90124 P/N 90125 316 STAINLESS STEEL MODULAR SWITCH FACE PLATE - 8 GANG NEW!

E & O E WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES SPECIFICATIONS MAY VARY OR CHANGE 16 WITHOUT NOTICE SWITCHES, SWITCH PANELS AND ACCESSORIES Viper Designed and Built By Bell Marine

Viper HEAVY DUTY VINYL SWITCH STICKER KITS 12MM SQUARE OR 19MM ROUND Never search for a switch sticker again! Absolutely every sticker you could want and available in 2 sizes, 19mm round or 12mm square and you get both black and white back grounds in each kit. Made from heavy duty vinyl, UV stabilized and designed for harsh conditions.

P/N 90032 12MM SQUARE VINYL MARINE STICKERS UV STABILIZED P/N 90033 19MM ROUND VINYL MARINE STICKERS UV STABILIZED

Viper PRO SERIES MODULAR LED ILLUMINATED SWITCH COVERS 90046 90047 90048 90049 90050 90051 90052

Individual switch covers enable you can choose the right illuminated cover to suit your switch. Simply snap them into place on the switch, you can add or replace anytime you need, or if you make an accessory change and want keep the same switch. Get that custom look in your marine electronics! Tool to change covers supplied.

P/N 90046-90059 ILLUMINATED SWITCH COVER

90053 90054 90055 90056 90057 90058 90059 Viper MARINE CIRCUIT BREAKERS

HT-01A 3 to 30AMP circuit breakers P/N 90041 3 AMP CIRCUIT BREAKER 125/250V AC 32V DC 50/60HZ CE approved P/N 90028 5AMP CIRCUIT BREAKER 2 pole P/N 90029 10AMP CIRCUIT BREAKER P/N 90030 15AMP CIRCUIT BREAKER (W28MM X H35MM X D14MM) P/N 90031 20AMP CIRCUIT BREAKER Optional Cover 90042 P/N 90040 30AMP CIRCUIT BREAKER Does not include waterproof reset button cover P/N 90042 CIRCUIT BREAKER COVER

Viper MARINE FLUSH MOUNT DUAL USB CHARGER

Charge your mobile phone, Ipad, Gopro, camera, in fact any USB device using our water proof flush mount dual USB adapter! A must for every boat. Supplied in a retail blister pack. Includes connectors and mounting screws.

P/N 90045 FLUSH MOUNT MARINE USB CHARGER

E & O E SPECIFICATIONS MAY VARY OR CHANGE WITHOUT NOTICE WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES 17 SWITCHES, SWITCH PANELS AND ACCESSORIES Viper Designed and Built By Bell Marine

Viper PRO SERIES MARINE BLADE FUSE HOLDERS Viper blade fuse holders come in 4, 6 & 10 gang versions and are designed for marine use. The inbuilt LED light glows when the fuse is broken, which allows you to quickly identify faulty fuses. Highly recommended for any battery management system in your vessel, complete with a clear removable clip on cover. The fuse holders can be joined in any combination by the solid link bar provided.

P/N 90114 MARINE FUSE HOLDERS 4 GANG P/N 90115 MARINE FUSE HOLDERS 6 GANG P/N 90116 MARINE FUSE HOLDERS 10 GANG

Viper PRO SERIES WATERPROOF INLINE BLADE FUSE HOLDER

Heavy duty waterproof marine blade fuse holder with transparent orange sealed cap that locks closed and has a mounting tab for easy instalation - accepts a single standard blade fuse up to 30amps. Combine this fuse holder with our LED indicator blade fuses and you can quickly see why these are becoming standard equipment for most boat builders.

P/N 90103 VIPER PRO SERIES WATERPROOF INLINE BLADE FUSE HOLDER

Viper PRO SERIES STAINLESS STEEL MARINE DUAL STUD BUSBAR These pro series stainless steel dual stud busbars are insulated featuring 8mm studs, narrow footprint for tight places and can even be used for extending outboard motor cables. Ideal for under-dash use and designed for marine use. (25mm X 85mm X 12mm), 37mm stud height.

P/N 90064 STAINLESS STEEL MARINE DUAL STUD BUSBAR

WORKSHOP SERVICE KITS AND REFILL PACKS

Viper PP FLEXIBLE SPLIT CONDUIT TUBING Our UV & chemical resistant flexible split polypropylene conduit tubing is ideal for marine applications. Operating temperature is between -20C to 90C and is available in 13mm and 25mm diameter - sold by the metre.

P/N 90118 13MM CORRUGATED SPLIT TUBING - PER METRE P/N 90119 25MM CORRUGATED SPLIT TUBING - PER METRE

Viper 25MM ID HIGH PRESSURE DRAIN HOSE Speciﬁcally designed for marine use this non toxic, 25mm ID clear reinforced drain hose is ideal for drains and general marine applications. It is UV stable and is sold by the 20mtr roll. Rated at 72 - 333 PSI maximum. (25mm ID, 30mm OD,)

P/N 50012 25MM HIGH PRESSURE DRAIN HOSE - ROLL 20METRE

E & O E SPECIFICATIONS MAY VARY OR CHANGE 18 WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES WITHOUT NOTICE ...... the original and the best chViain sopeckr is now available in fluoro green

STOP THE CHAIN CLANG NOW!

The Viper Chain Sock is a high tech polyester blend braid that encases your 6 or 8mm short link anchor chain.

How many times have you pulled up your anchor and the chain has scraped the side of your boat or deck? Does everybody in a 5 mile radius look at you when you throw your anchor overboard? Do you ﬁsh in shallow water for species such as whiting, bream etc? Do you use a drum winch on your boat? Do you own an aluminium boat?

If you answered yes to any of these questions you need a CHAIN SOCK! Protect your boat’s anchor rollers, bow sprit, winch, gel-coat, gunwale & stop spooking the ﬁsh!

WORLD CLASS

STAINLESS STEEL CHANDLERY & PERFORMANCE BOATING ACCESSORIES