Bosna i Hercegovina Босна и Херцеговина Institut za standardizaciju Институт за стандардизацију
Broj: 03-45.2-18-1522-1/20 Istočno Sarajevo, 23.12.2020. godine
PROGRAM RADA INSTITUTA NA USVAJANJU STANDARDA I DRUGIH STANDARDIZACIJSKIH DOKUMENTA ZA 2021. GODINU
INSTITUT ZA STANDARDIZACIJU BOSNE I HERCEGOVINE Bosna i Hercegovina, Trg Ilidžanske brigade 2b, 71123 Istočno Sarajevo, tel. + 387 57 310 - 560, Informaciono dokumentacioni centar: +387 57 310 - 580; BAS O 5.0-03 faks + 387 57 310 - 575; E-mail: [email protected]; www.bas.gov.ba Važi od: 2. 9. 2019.
U skladu sa zahtjevima EU Uredbe br. 1025/2012 kojom se uređuje evropski standardizacijski sistem, svako evropsko i nacionalno standardizacijsko tijelo mora, barem jednom godišnje izraditi svoj program rada. Program rada mora sadržavati podatke o standardima i drugim standardizacijskim dokumentima koje evropsko i nacionalno standardizacijsko tijelo namjerava pripremiti ili mijenjati i dopunjavati, koje ono priprema ili mijenja i dopunjuje i koje je objavilo u prethodnom razdoblju.
Izdavanje programa rada također je obaveza koju nacionalna standardizacijska tijela preuzimaju prihvaćanjem WTO TBT Kodeksa dobre prakse za pripremu, usvajanje i primjenu standarda, a čije je prihvaćanje utvrđeno Sporazumom o tehničkim zaprekama trgovini Svjetske trgovinske organizacije (WTO). Podatke o nacionalnim standardizacijskim tijelima koja su prihvatila Kodeks dobre prakse, ISO/IEC Information Centre objavljuje u publikaciji WTO TBT Standards Code Directory (https://tbtcode.iso.org/sites/wto-tbt/list-of-standardizing-bodies.html). Institut je Kodeks dobre prakse prihvatio 1997. godine.
Institut za standardizaciju Bosne i Hercegovine izdaje program rada, u elektronskom obliku jednom godišnje na web-stranici Instituta. On-line pretraživanje programa rada dostupno je na web-stranici Instituta: https://isbih.gov.ba/plan- rada/index?standard_code=&phase_id=&national_committee_id=&page=1.
Bosanskohercegovački standardi se pripremaju u skladu s Pravilnikom o proceduri pripremanja, donošenja i objavljivanja bosanskohercegovačkih standarda („Službeni glasnik BiH“, br. 51/18) i BAS Uputstvima.
Program rada za 2021 sadrži popis i svih izvornih standardizacijskih projekata uvrštenih u rad na prijedlog pojedinih tehničkih komiteta (BAS/TC) u prethodnom razdoblju, kao i prijedloge iz Strategijskog plana usvajanja standarda i drugih standardizacijskih dokumenta u Bosni i Hercegovini za period 2019 - 2021. godina.
Međunarodni ili evropski standardi i drugi standardizaciji dokumenti preuzimaju se u sistem bosanskohercegovačke standardizacije slijedećim metodama:
- proglašavanja (pr), - korica (ko), i - prijevoda (pv).
U Programu rada za svaki projekt bosanskohercegovačkog standarda koji je u pripremi navedeni su sljedeće podaci:
Oznaku bosanskohercegovačkog tehničkog komiteta, Oznaku BAS projekta, Oznaku izvornog dokumenta, Naziv BAS standarda na jednom od službenih jezika u BiH, Naziv standarda na engleskom jeziku, Metodu preuzimanja, Jezik, ICS, i Trenutnu fazu izrade.
Nakon prihvaćanja prijedloga za usvajanje bosanskohercegovačkog standarda, standardizacijski projekt prolazi kroz faze izrade u skladu s BAS U 8.5-03:2016. Standardizacijski projekt je završen s donošenjem odgovarajućeg bosanskohercegovačkog standarda (BAS standard).
Svi standardizacijski projekti u ovom programu za koji će biti dogovoreni njihov prekid ili obustavu, bit će izbrisani i/ili uključen u bilo koji od sljedećih godišnjih izdanja Programa rada na
2/4
(prazna strana)
4/4 Dodatak A1. PROGRAM RADA INSTITUTA ZA STANDARDIZACIJU BIH ZA 2021. GODINU NA IZRADI IZVORNIH BOSANSKOHERCEGOVAČKIH STANDARDA I STANDARDIZACIJSKIH DOKUMENATA
Trenutna Naziv BAS standarda na jednom od Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza službenih jezika u BiH preuzimanja izrade BAS/TC 21 psBAS 1057:2020 Beton – Specifikacija, svojstva, Concrete - Specification, performance, izv bs 91.100.30 50.99 proizvodnja i usklađenost - Smjernice za production and conformity - Guidelines primjenu standarda BAS EN 206+A1 for the implementation of standard BAS EN 206+A1 BAS/TC 58 nsBAS EN 1997-1/NA:2020 Eurokod 7: Geotehničko projektiranje – Eurocode 7 - Geotechnical design - Part izv hr 91.010.30, 40-00 Dio 1: Opća pravila - Nacionalni dodatak 1: General rules - National Annex 93.020 BAS/TC 58 prBAS EN 1997-2/NA:2021 Eurokod 7: Geotehničko projektovanje – Eurocode 7 - Geotechnical design - Part izv bs 91.010.30, 10.99 Dio 2: Istraživanje i ispitivanje temeljnog 2: Ground investigation and testing - 93.020 tla - Nacionalni dodatak National Annex BAS/TC 58 nsBAS EN 1999-1-4/NA:2020 Evrokod 9 – Projektovanje aluminijumskih Eurocode 9 - Design of aluminium izv sr 91.080.17, 40.60 konstrukcija – Dio 1-4: Hladno oblikovani structures - Part 1-4: Cold formed 91.080.10, konstrukcioni limovi - Nacionalni dodatak structural sheeting - National Annex 91.010.30 BAS/TC 58 nsBAS EN 1999-1-5/NA:2020 Evrokod 9 - Projektovanje aluminijumskih Eurocode 9 - Design of aluminium izv sr 91.080.17, 40.60 konstrukcija – Dio 1-5: Ljuske - structures - Part 1-5: Shell structures - 91.010.30, Nacionalno dodatak National Annex 93.020 BAS/TC 61 psBAS EN 1992-4/NA:2020 Eurokod 2: Projektovanje betonskih Eurocode 2 - Design of concrete izv hr 91.010.30, 50.99 konstrukcija - Dio 4: Projektovanje structures - Part 4: Design of fastenings 91.080.40 pričvršćivača za upotrebu u betonu - for use in concrete - National Annex Nacionalni dodatak BAS/TC 62 nsBAS EN 1993-5/NA:2020 Eurokod 3: Projektiranje čeličnih Eurocode 3 - Design of steel structures - izv hr 91.080.13, 40.60 konstrukcija – Dio 5: Piloti i žmurje - Part 5: Piling - National Annex 91.080.10, Nacionalni dodatak 91.010.30 BAS/TC 62 nsBAS EN 1993-6/NA:2020 Eurokod 3: Projektiranje čeličnih Eurocode 3 - Design of steel structures - izv hr 91.080.10, 40.60 konstrukcija – Dio 6: Konstrukcije Part 6: Crane supporting structures - 91.010.30, kranskih staza - Nacionalni dodatak National Annex 53.020.20 BAS/TC 62 nsBAS EN 1995-1-1/NA:2020 Eurokod 5: Projektovanje drvenih Eurocode 5 - Design of timber structures izv bs 91.010.30, 40.60 konstrukcija – Dio 1-1: Opće odredbe - - Part 1-1: General - Common rules and 91.080.20 Opća pravila i pravila za zgrade - rules for buildings - National Annex Nacionalni dodatak BAS/TC 62 nsBAS EN 1995-1-2/NA:2020 Evrokod 5: Projektovanje drvenih Eurocode 5: Design of timber structures - izv sr 91.010.30, 40.60 konstrukcija – Dio 1-2: Opšte odredbe – Part 1-2: General - Structural fire design 91.080.20,
5 Trenutna Naziv BAS standarda na jednom od Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza službenih jezika u BiH preuzimanja izrade BAS/TC 62 nsBAS EN 1995-2/NA:2020 Evrokod 5 - Projektovanje drvenih Eurocode 5 - Design of timber structures izv sr 91.010.30, 40.60 konstrukcija - Dio 2: Mostovi - Nacionalni - Part 2: Bridges - National Annex 93.040, dodatak 91.080.20
6 Dodatak A2. PROGRAM RADA INSTITUTA ZA STANDARDIZACIJU BIH ZA 2021. GODINU NA USVAJANJU STANDARDA I DRUGIH STANDARDIZACIJSKIH DOKUMENATA KOJI SU IDENTIČNI EVROPSKIM I/ILI MEĐUNARODNIM STANDARDIMA I STANDARDIZACIJSKIM DOKUMENTIMA
Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN ISO/TR 16401- CEN ISO/TR 16401-1:2018, IDT; Electronic fee collection - Evaluation of pr en,fr 35.240.60, 10.99 1:2021 ISO/TR 16401-1:2018, IDT equipment for conformity to ISO/TS 03.220.20 17575-2 - Part 1: Test suite structure and test purposes BAS/TC 1 prBAS CEN ISO/TS 14907- CEN ISO/TS 14907-2:2016, IDT; Electronic fee collection - Test pr en,fr 43.040.15, 10.99 2:2021 ISO/TS 14907-2:2016, IDT procedures for user and fixed equipment 35.240.60 - Part 2: Conformance test for the on- board unit application interface
BAS/TC 1 prBAS CEN ISO/TS 17251:2021 CEN ISO/TS 17251:2016, IDT; Health Informatics - Business pr en,fr 35.240.80 10.99 ISO/TS 17251:2016, IDT requirements for a syntax to exchange structured dose information for medicinal products BAS/TC 1 prBAS CEN ISO/TS 17425:2021 CEN ISO/TS 17425:2016, IDT; Intelligent transport systems - pr en,fr 03.220.01, 10.99 ISO/TS 17425:2016, IDT Cooperative systems - Data exchange 35.240.60 specification for in-vehicle presentation of external road and traffic related data BAS/TC 1 prBAS CEN ISO/TS 17426:2021 CEN ISO/TS 17426:2016, IDT; Intelligent transport systems - pr en,fr 03.220.01, 10.99 ISO/TS 17426:2016, IDT Cooperative systems - Contextual 35.240.60 speeds BAS/TC 1 prBAS CEN ISO/TS 17429:2021 CEN ISO/TS 17429:2017, IDT; Intelligent transport systems - pr en,fr 03.220.01, 10.99 ISO/TS 17429:2017, IDT Cooperative ITS - ITS station facilities 35.240.60 for the transfer of information between ITS stations BAS/TC 1 prBAS CEN ISO/TS 17444- CEN ISO/TS 17444-1:2017, IDT; Electronic fee collection - Charging pr en,fr 35.240.60, 10.99 1:2021 ISO/TS 17444-1:2017, IDT performance - Part 1: Metrics 03.220.20 BAS/TC 1 prBAS CEN ISO/TS 17444- CEN ISO/TS 17444-2:2017, IDT; Electronic fee collection - Charging pr en,fr 35.240.60, 10.99 2:2021 ISO/TS 17444-2:2017, IDT performance - Part 2: Examination 03.220.20 framework BAS/TC 1 prBAS CEN ISO/TS 17574:2021 CEN ISO/TS 17574:2017, IDT; Electronic fee collection - Guidelines for pr en,fr 35.240.60, 10.99 ISO/TS 17574:2017, IDT security protection profiles 03.220.20
7 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN ISO/TS 18530:2021 CEN ISO/TS 18530:2015, IDT Health Informatics - Automatic pr en,fr 35.240.80 10.99 identification and data capture marking and labelling - Subject of care and individual provider identification BAS/TC 1 prBAS CEN ISO/TS 19091:2021 CEN ISO/TS 19091:2019, IDT; Intelligent transport systems - pr en,fr 35.240.60, 10.99 ISO/TS 19091:2019, IDT Cooperative ITS - Using V2I and I2V 03.220.20 communications for applications related to signalized intersections BAS/TC 1 prBAS CEN ISO/TS 19139- CEN ISO/TS 19139-1:2019, IDT; Geographic information - XML schema pr en,fr 35.240.70 10.99 1:2021 ISO/TS 19139-1:2019, IDT implementation - Part 1: Encoding rules
BAS/TC 1 prBAS CEN ISO/TS 19256:2021 CEN ISO/TS 19256:2017, IDT Health informatics - Requirements for pr en,fr 35.240.80 10.99 medicinal product dictionary systems for health care BAS/TC 1 prBAS CEN ISO/TS 19293:2021 CEN ISO/TS 19293:2018, IDT; Health Informatics - Requirements for a pr en,fr 35.240.80 10.99 ISO/TS 19293:2018, IDT record of the dispense of a medicinal product BAS/TC 1 prBAS CEN ISO/TS 19468:2021 CEN ISO/TS 19468:2019, IDT; Intelligent transport systems - Data pr en,fr 35.240.60, 10.99 ISO/TS 19468:2019, IDT interfaces between centres for transport 03.220.20 information and control systems - Platform independent model specifications for data exchange protocols for transport information and control systems BAS/TC 1 prBAS CEN ISO/TS 19844:2021 CEN ISO/TS 19844:2017, IDT Health informatics - Identification of pr en,fr 35.240.80 10.99 medicinal products - Implementation guidelines for data elements and structures for the unique identification and exchange of regulated information on substances
8 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN ISO/TS 20440:2021 CEN ISO/TS 20440:2016, IDT; Health informatics - Identification of pr en,fr 35.240.80 10.99 ISO/TS 20440:2016, IDT medicinal products - Implementation guide for ISO 11239 data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging
BAS/TC 1 prBAS CEN ISO/TS 20443:2021 CEN ISO/TS 20443:2018, IDT Health informatics - Identification of pr en,fr 35.240.80 10.99 medicinal products - Implementation guidelines for ISO 11615 data elements and structures for the unique identification and exchange of regulated medicinal product information
BAS/TC 1 prBAS CEN ISO/TS 20451:2021 CEN ISO/TS 20451:2018, IDT Health informatics - Identification of pr en,fr 35.240.80 10.99 medicinal products - Implementation guidelines for ISO 11616 data elements and structures for the unique identification and exchange of regulated pharmaceutical product information
BAS/TC 1 prBAS CEN ISO/TS 21177:2021 CEN ISO/TS 21177:2019, IDT; Intelligent transport systems - ITS pr en,fr 35.030, 10.99 ISO/TS 21177:2019, IDT station security services for secure 03.220.01, session establishment and 35.240.60 authentication between trusted devices BAS/TC 1 prBAS CEN ISO/TS 21189:2021 CEN ISO/TS 21189:2019, IDT; Intelligent transport systems - pr en,fr 03.220.01, 10.99 ISO/TS 21189:2019, IDT Cooperative ITS - Test requirements 35.240.60 and Protocol Implementation Conformance Statement (PICS) pro forma for CEN ISO/TS 17426 BAS/TC 1 prBAS CEN ISO/TS 21719- CEN ISO/TS 21719-1:2018, IDT; Electronic fee collection - pr en,fr 35.240.60, 10.99 1:2021 ISO/TS 21719-1:2018, IDT Personalization of on-board equipment 03.220.20 (OBE) - Part 1: Framework
9 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN ISO/TS 21719- CEN ISO/TS 21719-2:2018, IDT; Electronic fee collection - pr en,fr 35.240.60, 10.99 2:2021 ISO/TS 21719-2:2018, IDT Personalization of on-board equipment 03.220.20 (OBE) - Part 2: Using dedicated short- range communication BAS/TC 1 prBAS CEN/CLC/ETSI TR 101 CEN/CLC/ETSI/TR 101 Guidance for the application of pr en 33.020, 10.99 552:2020 552:2014, IDT conformity assessment to accessibility 35.020, requirements for public procurement of 13.180, ICT products and services in Europe 03.100.10
BAS/TC 1 prBAS CEN/CLC/ETSI TR CEN/CLC/ETSI TR 101550:2014, Documents relevant to EN 301 549 pr en 33.020, 10.99 101550:2020 IDT "Accessibility requirements suitable for 35.020, public procurement of ICT products and 13.180, services in Europe" 03.100.10 BAS/TC 1 prBAS CEN/CLC/ETSI TR CEN/CLC/ETSI TR 101551:2014, Guidelines on the use of accessibility pr en 33.020, 10.99 101551:2020 IDT award criteria suitable for public 35.020, procurement of ICT products and 13.180, services in Europe 03.100.10 BAS/TC 1 prBAS CEN/ISO TR 16401- CEN/ISO TR 16401-2:2018, IDT; Electronic fee collection - Evaluation of pr en,fr 35.240.60, 10.99 2:2021 ISO/TR 16401-2:2018, IDT equipment for conformity to ISO/TS 03.220.20 17575-2 - Part 2: Abstract test suite BAS/TC 1 prBAS CEN/TR 12896-9:2021 CEN/TR 12896-9:2019, IDT Public transport - Reference data model - pr en 35.240.60 10.99 Part 9: Informative documentation
BAS/TC 1 prBAS CEN/TR 16931-4:2021 CEN/TR 16931-4:2017, IDT Electronic invoicing - Part 4: Guidelines pr en 35.240.63, 10.99 on interoperability of electronic invoices 35.240.20 at the transmission level
BAS/TC 1 prBAS CEN/TR 16931-5:2021 CEN/TR 16931-5:2017, IDT Electronic invoicing - Part 5: Guidelines pr en 35.240.63, 10.99 on the use of sector or country 35.240.20 extensions in conjunction with EN 16931- 1, methodology to be applied in the real environment BAS/TC 1 prBAS CEN/TR 16931-6:2021 CEN/TR 16931-6:2017, IDT Electronic invoicing - Part 6: Result of pr en 35.240.63, 10.99 the test of EN 16931-1 with respect to its 35.240.20 practical application for an end user
10 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN/TR 16959:2021 CEN/TR 16959:2016, IDT Public transport - Network and pr en 35.240.60 10.99 Timetable Exchange (NeTEx) - Examples, guidelines and explanatory materials BAS/TC 1 prBAS CEN/TR 16968:2021 CEN/TR 16968:2016, IDT Electronic Fee Collection - Assessment pr en 35.240.60 10.99 of security measures for applications using Dedicated Short-Range Communication BAS/TC 1 prBAS CEN/TR 17143:2021 CEN/TR 17143:2017, IDT Intelligent transport systems - Standards pr en 35.240.60 10.99 and actions necessary to enable urban infrastructure coordination to support Urban-ITS BAS/TC 1 prBAS CEN/TR 17249-1:2021 CEN/TR 17249-1:2018, IDT Intelligent transport systems - eSafety - pr en 35.240.60, 10.99 Part 1: Extending eCall to other 03.220.20 categories of vehicle BAS/TC 1 prBAS CEN/TR 17297-1:2021 CEN/TR 17297-1:2019, IDT Intelligent transport systems - Location pr en 35.240.60 10.99 referencing harmonization for Urban ITS - Part 1: State of the art and guidelines
BAS/TC 1 prBAS CEN/TR 17311:2021 CEN/TR 17311:2019, IDT Public transport - Interoperable fare pr en 35.240.60 10.99 management system - Bluetooth low energy ticketing use cases and guidelines BAS/TC 1 prBAS CEN/TR 17370:2021 CEN/TR 17370:2019, IDT Public transport - Operating raw data pr en 35.240.60, 10.99 and statistics exchange 03.220.99 BAS/TC 1 prBAS CEN/TR 17401:2021 CEN/TR 17401:2020, IDT Intelligent transport systems - Urban-ITS pr en 35.240.60 10.99 - Mixed vendor environment guide BAS/TC 1 prBAS CEN/TR 419010:2021 CEN/TR 419010:2017, IDT Framework for standardization of pr en 35.030, 10.99 signatures - Extended structure 35.240.30 including electronic identification and authentication BAS/TC 1 prBAS CEN/TR 419030:2021 CEN/TR 419030:2018, IDT Rationalized structure for electronic pr en 35.030 10.99 signature standardization - Best practices for SMEs BAS/TC 1 prBAS CEN/TR 419040:2021 CEN/TR 419040:2018, IDT Rationalized structure for electronic pr en 35.030 10.99 signature standardization - Guidelines for citizens
11 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN/TR 419200:2021 CEN/TR 419200:2017, IDT Guidance for signature creation and pr en 35.030, 10.99 other related devices 35.240.30 BAS/TC 1 prBAS CEN/TR 419210:2021 CEN/TR 419210:2019, IDT Applicability of CEN Standards to pr en 35.240.63, 10.99 Qualified Electronic Seal Creation 35.030 Device under the EU Regulation N°910/2014 (eIDAS) BAS/TC 1 prBAS CEN/TS 13149-10:2021 CEN/TS 13149-10:2020, IDT Public transport - Road vehicle pr en 43.040.15, 10.99 scheduling and control systems - Part 35.240.60 10: Location service BAS/TC 1 prBAS CEN/TS 13149-11:2021 CEN/TS 13149-11:2020, IDT Public transport - Road vehicle pr en 43.040.15, 10.99 scheduling and control systems - Part 35.240.60 11: Vehicle platform interface service BAS/TC 1 prBAS CEN/TS 13149-7:2021 CEN/TS 13149-7:2020, IDT Public transport - Road vehicle pr en 43.040.15, 10.99 scheduling and control systems - Part 7: 35.240.60 System and network architecture BAS/TC 1 prBAS CEN/TS 13149-9:2021 CEN/TS 13149-9:2020, IDT Public transport - Road vehicle pr en 43.040.15, 10.99 scheduling and control systems - Part 9: 35.240.60 Time service BAS/TC 1 prBAS CEN/TS 15531-5:2021 CEN/TS 15531-5:2016, IDT Public transport ‐ Service interface for pr en 35.240.60 10.99 real‐time information relating to public transport operations ‐ Part 5: Functional service interfaces situation exchange: Situation Exchange BAS/TC 1 prBAS CEN/TS 16157-8:2021 CEN/TS 16157-8:2020, IDT Intelligent transport systems - DATEX II pr en 35.240.60 10.99 data exchange specifications for traffic management and information - Part 8: Traffic management publications and extensions dedicated to the urban environment BAS/TC 1 prBAS CEN/TS 16157-9:2021 CEN/TS 16157-9:2020, IDT Intelligent transport systems - DATEX II pr en 35.240.60 10.99 data exchange specifications for traffic management and information - Part 9: Traffic signal management publications dedicated to the urban environment
BAS/TC 1 prBAS CEN/TS 16405:2021 CEN/TS 16405:2017, IDT Intelligent transport systems - Ecall - pr en 35.240.60, 10.99 Additional data concept specification for 03.220.20 heavy goods vehicles
12 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN/TS 16614-1:2021 CEN/TS 16614-1:2020, IDT Public transport - Network and pr en 35.240.60 10.99 Timetable Exchange (NeTEx) - Part 1: Public transport network topology exchange format BAS/TC 1 prBAS CEN/TS 16614-2:2021 CEN/TS 16614-2:2020, IDT Public transport - Network and pr en 35.240.60 10.99 Timetable Exchange (NeTEx) - Part 2: Public transport scheduled timetables exchange format BAS/TC 1 prBAS CEN/TS 16614-3:2021 CEN/TS 16614-3:2020, IDT Public transport - Network and pr en 35.240.60 10.99 Timetable Exchange (NeTEx) - Part 3: Public transport fares exchange format BAS/TC 1 prBAS CEN/TS 16614-4:2021 CEN/TS 16614-4:2020, IDT Public transport - Network and pr en 35.240.60 10.99 Timetable Exchange (NeTEx) - Part 4: Passenger Information European Profile
BAS/TC 1 prBAS CEN/TS 16702-2:2021 CEN/TS 16702-2:2020, IDT Electronic fee collection - Secure pr en 35.240.60, 10.99 monitoring for autonomous toll systems - 03.220.20 Part 2: Trusted recorder BAS/TC 1 prBAS CEN/TS 16794-1:2021 CEN/TS 16794-1:2019, IDT Public transport - Communication pr en 35.240.60, 10.99 between contactless readers and fare 35.240.15 media - Part 1: Implementation requirements for ISO/IEC 14443 BAS/TC 1 prBAS CEN/TS 16794-2:2021 CEN/TS 16794-2:2019, IDT Public transport - Communication pr en 35.240.60, 10.99 between contactless readers and fare 35.240.15 media - Part 2: Test plan for ISO/IEC 14443 BAS/TC 1 prBAS CEN/TS 16920:2021 CEN/TS 16920:2016, IDT Environmental influence testing pr en 35.240.15 10.99 methodology for operational deployments of European ABC systems
BAS/TC 1 prBAS CEN/TS 16921:2021 CEN/TS 16921:2016, IDT Personal identification - Borders and law pr en 35.240.15 10.99 enforcement application profiles for mobile biometric identification systems
BAS/TC 1 prBAS CEN/TS 16931-2:2021 CEN/TS 16931-2:2017, IDT Electronic invoicing - Part 2: List of pr en 35.240.63, 10.99 syntaxes that comply with EN 16931-1 35.240.20
13 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN/TS 16931-3-1:2021 CEN/TS 16931-3-1:2017, IDT Electronic invoicing - Part 3-1: pr en 35.240.63, 10.99 Methodology for syntax bindings of the 35.240.20 core elements of an electronic invoice BAS/TC 1 prBAS CEN/TS 16931-3-2:2021 CEN/TS 16931-3-2:2020, IDT Electronic invoicing - Part 3-2: Syntax pr en 35.240.63, 10.99 binding for ISO/IEC 19845 (UBL 2.1) 35.240.20 invoice and credit note BAS/TC 1 prBAS CEN/TS 16931-3-3:2021 CEN/TS 16931-3-3:2020, IDT Electronic invoicing - Part 3-3: Syntax pr en 35.240.63, 10.99 binding for UN/CEFACT XML Industry 35.240.20 Invoice D16B BAS/TC 1 prBAS CEN/TS 16931-3-4:2021 CEN/TS 16931-3-4:2020, IDT Electronic invoicing - Part 3-4: Syntax pr en 35.240.20, 10.99 binding for UN/EDIFACT INVOIC D16B 35.240.60 BAS/TC 1 prBAS CEN/TS 16931-7:2021 CEN/TS 16931-7:2020, IDT Electronic invoicing - Part 7: pr en 35.240.63, 10.99 Methodology for the development and 35.240.20 use of EN 16931-1 compliant structured Core Invoice Usage Specifications
BAS/TC 1 prBAS CEN/TS 16986/Cor1:2021 CEN/TS 16986:2016/AC:2017, Electronic Fee Collection - Interoperable pr en 35.240.60 10.99 IDT application profiles for information exchange between Service Provision and Toll Charging BAS/TC 1 prBAS CEN/TS 16986:2021 CEN/TS 16986:2016, IDT Electronic Fee Collection - Interoperable pr en 35.240.60 10.99 application profiles for information exchange between Service Provision and Toll Charging BAS/TC 1 prBAS CEN/TS 17051:2021 CEN/TS 17051:2017, IDT Full body photography pr en 35.240.15 10.99 BAS/TC 1 prBAS CEN/TS 17118:2021 CEN/TS 17118:2017, IDT Intelligent transport systems - Public pr en 35.240.60 10.99 transport - Open API for distributed journey planning BAS/TC 1 prBAS CEN/TS 17148:2021 CEN/TS 17148:2018, IDT Intelligent Transport Systems - eSafety - pr en 35.240.60 10.99 ProForma eCall Agreement between TPSP and PARES BAS/TC 1 prBAS CEN/TS 17154-1:2021 CEN/TS 17154-1:2019, IDT Electronic fee collection - Evaluation of pr en 35.240.60 10.99 implementation for conformity to CEN/TS 16986 - Part 1: Test suite structure and purposes
14 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN/TS 17154-2:2021 CEN/TS 17154-2:2019, IDT Electronic fee collection - Evaluation of pr en 35.240.60 10.99 implementation for conformity to CEN/TS 16986 - Part 2: Abstract test suite BAS/TC 1 prBAS CEN/TS 17182:2021 CEN/TS 17182:2018, IDT Intelligent transport systems - eSafety - pr en 35.240.60 10.99 eCall via an ITS-station BAS/TC 1 prBAS CEN/TS 17184:2021 CEN/TS 17184:2018, IDT Intelligent transport systems - eSafety - pr en 35.240.60 10.99 eCall High level application Protocols (HLAP) using IMS packet switched networks BAS/TC 1 prBAS CEN/TS 17234:2021 CEN/TS 17234:2018, IDT Intelligent transport systems - eSafety - pr en 35.240.60, 10.99 eCall: Tests to enable PSAPs to 03.220.20 demonstrate conformance and performance BAS/TC 1 prBAS CEN/TS 17240:2021 CEN/TS 17240:2018, IDT Intelligent transport systems - ESafety - pr en 35.240.60 10.99 ECall end to end conformance testing for IMS packet switched based systems
BAS/TC 1 prBAS CEN/TS 17241:2021 CEN/TS 17241:2019, IDT Intelligent transport systems - Traffic pr en 35.240.60 10.99 management systems - Status, fault and quality requirements BAS/TC 1 prBAS CEN/TS 17249-2:2021 CEN/TS 17249-2:2018, IDT Intelligent transport systems - eSafety - pr en 35.240.60, 10.99 Part 2 : eCall for HGVs and other 03.220.20 commercial vehicles BAS/TC 1 prBAS CEN/TS 17249-3:2021 CEN/TS 17249-3:2018, IDT Intelligent transport systems - eSafety - pr en 35.240.60, 10.99 Part 3: eCall for Coaches and buses 03.220.20 BAS/TC 1 prBAS CEN/TS 17249-4:2021 CEN/TS 17249-4:2019, IDT Intelligent transport systems - eSafety - pr en 35.240.60 10.99 Part 4: eCall for UNECE Category T, R, S agricultural/forestry vehicles BAS/TC 1 prBAS CEN/TS 17249-5:2021 CEN/TS 17249-5:2019, IDT Intelligent transport systems - eSafety - pr en 35.240.60 10.99 Part 5: eCall for UNECE Category L1 and L3 powered two-wheeled vehicles BAS/TC 1 prBAS CEN/TS 17249-6:2021 CEN/TS 17249-6:2019, IDT Intelligent transport systems - eSafety - pr en 35.240.60 10.99 Part 6: eCall for UNECE Category L2, L4, L5, L6 and L7 tricycles and quadricycles
15 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN/TS 17261:2021 CEN/TS 17261:2018, IDT Biometric authentication for critical pr en 35.240.15 10.99 infrastructure access control - Requirements and Evaluation BAS/TC 1 prBAS CEN/TS 17262:2021 CEN/TS 17262:2018, IDT Personal identification - Robustness pr en 35.240.20 10.99 against biometric presentation attacks - Application to European Automated Border Control BAS/TC 1 prBAS CEN/TS 17268:2021 CEN/TS 17268:2018, IDT Intelligent transport systems - ITS pr en 35.240.60 10.99 spatial data - Data exchange on changes in road attributes BAS/TC 1 prBAS CEN/TS 17288:2021 CEN/TS 17288:2020, IDT Health informatics - The International pr en 35.240.80 10.99 Patient Summary - Guideline for European Implementation BAS/TC 1 prBAS CEN/TS 17297-2:2021 CEN/TS 17297-2:2019, IDT Intelligent transport systems - Location pr en 35.240.60 10.99 Referencing Harmonisation for Urban- ITS - Part 2: Transformation methods
BAS/TC 1 prBAS CEN/TS 17312:2021 CEN/TS 17312:2019, IDT Intelligent transport systems - eSafety - pr en 35.240.60 10.99 eCall via satellite BAS/TC 1 prBAS CEN/TS 17313:2021 CEN/TS 17313:2019, IDT Intelligent transport systems - ESafety - pr en 35.240.60 10.99 Interoperability and user choice in eCall aftermarket and third party eCall services BAS/TC 1 prBAS CEN/TS 17363:2021 CEN/TS 17363:2019, IDT Intelligent transport systems - ECall pr en 35.240.60, 10.99 optional additional data - Linked mobile 13.200 phone number data concept BAS/TC 1 prBAS CEN/TS 17378:2021 CEN/TS 17378:2019, IDT Intelligent transport systems - Urban ITS pr en 35.240.60, 10.99 - Air quality management in urban areas 13.040.50
BAS/TC 1 prBAS CEN/TS 17380:2021 CEN/TS 17380:2019, IDT Intelligent transport systems - Urban-ITS pr en 35.240.60, 10.99 - 'Controlled Zone' management for 03.220.20 UVARs using C-ITS BAS/TC 1 prBAS CEN/TS 17395:2021 CEN/TS 17395:2019, IDT Intelligent transport systems - eSafety - pr en 35.240.60 10.99 eCall for automated and autonomous vehicles BAS/TC 1 prBAS CEN/TS 17400:2021 CEN/TS 17400:2020, IDT Intelligent transport systems - Urban ITS pr en 35.240.60 10.99 - Mixed vendor environments, methodologies & translators
16 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS CEN/TS 17402:2021 CEN/TS 17402:2020, IDT Intelligent transport systems - Urban ITS pr en 35.240.60 10.99 - Use of regional traffic standards in a mixed vendor environment BAS/TC 1 prBAS CEN/TS 17413:2021 CEN/TS 17413:2020, IDT Intelligent transport systems - Urban ITS pr en 35.240.60 10.99 - Models and definitions for new modes
BAS/TC 1 prBAS CEN/TS 17466:2021 CEN/TS 17466:2020, IDT Intelligent transport systems - Urban ITS pr en 35.240.60, 10.99 - Communication interfaces and profiles 03.220.20 for traffic management BAS/TC 1 prBAS CEN/TS 17489-1:2021 CEN/TS 17489-1:2020, IDT Personal identification - Secure and pr en 35.240.15 10.99 interoperable European Breeder Documents - Part 1: Framework overview BAS/TC 1 prBAS CEN/TS 419221-1:2021 CEN/TS 419221-1:2016, IDT Protection Profiles for TSP pr en 35.030, 10.99 cryptographic modules - Part 1: 35.040, Overview 35.240.30 BAS/TC 1 prBAS CEN/TS 419221-2:2021 CEN/TS 419221-2:2016, IDT Protection Profiles for TSP pr en 35.030, 10.99 cryptographic modules - Part 2: 35.040, Cryptographic module for CSP signing 35.240.30 operations with backup BAS/TC 1 prBAS CEN/TS 419221-3:2021 CEN/TS 419221-3:2016, IDT Protection Profiles for TSP pr en 35.030, 10.99 Cryptographic modules - Part 3: 35.040, Cryptographic module for CSP key 35.240.30 generation services BAS/TC 1 prBAS CEN/TS 419221-4:2021 CEN/TS 419221-4:2016, IDT Protection Profiles for TSP pr en 35.030, 10.99 cryptographic modules - Part 4: 35.040, Cryptographic module for CSP signing 35.240.30 operations without backup BAS/TC 1 prBAS EN 1064:2021 EN 1064:2020, IDT Health informatics - Standard pr 35.240.80 10.99 communication protocol - Computer- assisted electrocardiography BAS/TC 1 prBAS EN 1332-3:2021 EN 1332-3:2020, IDT Identification card systems - User pr 35.240.15 10.99 Interface - Part 3: Key pads BAS/TC 1 prBAS EN 15722:2021 EN 15722:2020, IDT Intelligent transport systems - ESafety - pr 35.240.60, 10.99 ECall minimum set of data 13.200, 03.220.20
17 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS EN 16157-5:2021 EN 16157-5:2020, IDT Intelligent transport systems - DATEX II pr 35.240.60 10.99 data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publications BAS/TC 1 prBAS EN 16234-1:2021 EN 16234-1:2019, IDT e-Competence Framework (e-CF) - A pr 35.020 10.99 common European Framework for ICT Professionals in all sectors - Part 1: Framework BAS/TC 1 prBAS EN 16931- EN 16931- Electronic invoicing - Part 1: Semantic pr 35.240.63, 10.99 1+A1/Cor1:2021 1:2017+A1:2019/AC:2020, IDT data model of the core elements of an 35.240.20 electronic invoice BAS/TC 1 prBAS EN 16931-1+A1:2021 EN 16931-1:2017+A1:2019, IDT Electronic invoicing - Part 1: Semantic pr 35.240.63, 10.99 data model of the core elements of an 35.240.20 electronic invoice BAS/TC 1 prBAS EN 17099:2021 EN 17099:2020, IDT Information technology - Fishery and pr 35.040.50, 10.99 aquaculture products - Requirements for 67.120.30 labelling of distribution units and pallets in the trade of fishery and aquaculture products BAS/TC 1 prBAS EN 17269:2021 EN 17269:2019, IDT Health informatics - The International pr 35.240.80 10.99 Patient Summary BAS/TC 1 prBAS EN 17358:2021 EN 17358:2020, IDT Intelligent transport systems - ESafety - pr 35.240.60, 10.99 eCall OAD for multiple Optional 03.220.20 Additional Datasets BAS/TC 1 prBAS EN 301549:2020 EN 301549:2015, IDT Accessibility requirements suitable for pr en 33.030 10.99 public procurement of ICT products and services in Europe BAS/TC 1 prBAS EN 301549:2020 EN 301549:2019, IDT Accessibility requirements for ICT pr en 33.030 10.99 products and services BAS/TC 1 prBAS EN ISO 11073- EN ISO 11073-20701:2020, IDT; Health informatics - Device ko en,fr 35.240.80 10.99 20701:2021 ISO/IEEE 11073-20701:2020, interoperability - Part 20701: Point-of- IDT care medical device communication - Service oriented medical device exchange architecture and protocol binding
18 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS EN ISO 12813:2021 EN ISO 12813:2019, IDT; ISO Electronic fee collection - Compliance ko en,fr 35.240.60, 10.99 12813:2019, IDT check communication for autonomous 03.220.20 systems BAS/TC 1 prBAS EN ISO 14906/A1:2021 EN ISO 14906:2018/A1:2020, Electronic fee collection - Application ko en,fr 35.240.60, 10.99 IDT; ISO 14906:2018/Amd interface definition for dedicated short- 03.220.20 1:2020, IDT range communication - Amendment 1 BAS/TC 1 prBAS EN ISO 14907-1:2021 EN ISO 14907-1:2020, IDT; ISO Electronic fee collection - Test ko en,fr 43.040.15, 10.99 14907-1:2020, IDT procedures for user and fixed equipment 35.240.60 - Part 1: Description of test procedures
BAS/TC 1 prBAS EN ISO 19107:2021 EN ISO 19107:2019, IDT; ISO Geographic information - Spatial ko en,fr 35.240.70 10.99 19107:2019, IDT schema BAS/TC 1 prBAS EN ISO 19111:2021 EN ISO 19111:2020, IDT Geographic information - Referencing ko en,fr 35.240.70 10.99 by coordinates BAS/TC 1 prBAS EN ISO 19116:2021 EN ISO 19116:2019, IDT; ISO Geographic information - Positioning ko en,fr 35.240.70 10.99 19116:2019, IDT services BAS/TC 1 prBAS EN ISO 19136-1:2021 EN ISO 19136-1:2020, IDT; ISO Geographic information - Geography ko en,fr 35.240.70 10.99 19136-1:2020, IDT Markup Language (GML) - Part 1: Fundamentals BAS/TC 1 prBAS EN ISO 22418:2021 EN ISO 22418:2020, IDT; ISO Intelligent transport systems - Fast ko en,fr 03.220.01, 10.99 22418:2020, IDT service announcement protocol (FSAP) 35.240.60 for general purposes in ITS BAS/TC 1 prBAS EN ISO/IEC 15408-1:2021 EN ISO/IEC 15408-1:2020, IDT Information technology - Security ko en,fr 35.030 10.99 techniques - Evaluation criteria for IT security - Part 1: Introduction and general model BAS/TC 1 prBAS EN ISO/IEC 15408-2:2021 EN ISO/IEC 15408-2:2020, IDT Information technology - Security ko en,fr 35.030 10.99 techniques - Evaluation criteria for IT security - Part 2: Security functional components BAS/TC 1 prBAS EN ISO/IEC 15408-3:2021 EN ISO/IEC 15408-3:2020, IDT Information technology - Security ko en,fr 35.030 10.99 techniques - Evaluation criteria for IT security - Part 3: Security assurance components BAS/TC 1 prBAS EN ISO/IEC 18045:2021 EN ISO/IEC 18045:2020, IDT Information technology - Security ko en,fr 35.030 10.99 techniques - Methodology for IT security evaluation
19 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS EN ISO/IEC 19790:2021 EN ISO/IEC 19790:2020, IDT Information technology - Security ko en,fr 35.030 10.99 techniques - Security requirements for cryptographic modules BAS/TC 1 prBAS EN ISO/IEC 27000:2021 EN ISO/IEC 27000:2020, IDT Information technology - Security ko en,fr 35.030, 10.99 techniques - Information security 03.100.70, management systems - Overview and 01.040.35, vocabulary 01.040.03 BAS/TC 1 prBAS EN ISO/IEC 27011:2021 EN ISO/IEC 27011:2020, IDT Information technology - Security ko en,fr 35.030, 10.99 techniques - Code of practice for 03.100.70 Information security controls based on ISO/IEC 27002 for telecommunications organizations BAS/TC 1 prBAS EN ISO/IEC 27018:2021 EN ISO/IEC 27018:2020, IDT Information technology - Security ko en,fr 35.030 10.99 techniques - Code of practice for protection of personally identifiable information (PII) in public clouds acting as PII processors BAS/TC 1 prBAS EN ISO/IEC 27019:2021 EN ISO/IEC 27019:2020, IDT Information technology - Security ko en,fr 03.100.70 10.99 techniques - Information security controls for the energy utility industry BAS/TC 1 prBAS EN ISO/IEC 29100:2021 EN ISO/IEC 29100:2020, IDT Information technology - Security ko en,fr 35.030 10.99 techniques - Privacy framework BAS/TC 1 prBAS EN ISO/IEC 29134:2021 EN ISO/IEC 29134:2020, IDT Information technology - Security ko en,fr 35.030 10.99 techniques - Guidelines for privacy impact assessment BAS/TC 1 prBAS EN ISO/IEC 29147:2021 EN ISO/IEC 29147:2020, IDT Information technology - Security ko en,fr 35.030 10.99 techniques - Vulnerability disclosure BAS/TC 1 prBAS EN ISO/IEC 30111:2021 EN ISO/IEC 30111:2020, IDT Information technology - Security ko en,fr 35.030 10.99 techniques - Vulnerability handling processes BAS/TC 1 prBAS EN ISO/IEEE 11073- EN ISO/IEEE 11073-10201:2020, Health informatics - Device pr en,fr 35.240.80 10.99 10201:2021 IDT; ISO/IEEE 11073- interoperability - Part 10201: Point-of- 10201:2020, IDT care medical device communication - Domain information model BAS/TC 1 prBAS ISO 22739:2021 ISO 22739:2020, IDT Blockchain and distributed ledger ko en,fr 35.030, 10.99 technologies - Vocabulary 35.240.99, 35.240.40, 01.040.35
20 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO 9660/A2:2021 ISO 9660:1988/Amd 2:2020, IDT Information processing — Volume and ko en,fr 35.220.30 10.99 file structure of CD-ROM for information interchange — Amendment 2
BAS/TC 1 prBAS ISO/IEC 11179-3/A1:2021 ISO/IEC 11179-3:2013/Amd Information technology — Metadata ko en,fr 35.040.50 10.99 1:2020, IDT registries (MDR) — Part 3: Registry metamodel and basic attributes — Amendment 1 BAS/TC 1 prBAS ISO/IEC 13888-1:2021 ISO/IEC 13888-1:2020, IDT Information security - Non-repudiation - ko en,fr 35.030 10.99 Part 1: General BAS/TC 1 prBAS ISO/IEC 13888-3:2021 ISO/IEC 13888-3:2020, IDT Information security - Non-repudiation - ko en,fr 35.030 10.99 Part 3: Mechanisms using asymmetric techniques BAS/TC 1 prBAS ISO/IEC 14443-3/A2:2021 ISO/IEC 14443-3:2018/Amd Cards and security devices for personal ko en,fr 35.240.15 10.99 2:2020, IDT identification — Contactless proximity objects — Part 3: Initialization and anticollision — Amendment 2: Enhancements for harmonization
BAS/TC 1 prBAS ISO/IEC 14443-4/A2:2021 ISO/IEC 14443-4:2018/Amd Cards and security devices for personal ko en,fr 35.240.15 10.99 2:2020, IDT identification — Contactless proximity objects — Part 4: Transmission protocol — Amendment 2: Enhancements for harmonization
BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A14/Cor1:2021 14:2009/Cor 1:2010, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 14: Open Font Format reference software — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A14:2021 14:2009, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 14: Open Font Format reference software
21 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A15:2021 15:2010, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 15: Reference software for Multiview Video Coding BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A16:2021 16:2008, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 16: Symbolic Music Representation reference software BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A17:2021 17:2008, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 17: Reference software for LASeR and SAF
BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A18:2021 18:2008, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 18: Reference software for new profiles for professional applications BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A19:2021 19:2009, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 19: Reference software for Scalable Video Coding BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A20:2021 20:2009, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 20: MPEG-1 and -2 on MPEG-4 reference software and BSAC extensions
BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A21:2021 21:2009, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 21: Frame-based Animated Mesh Compression reference software
22 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A22:2021 22:2009, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 22: Reference software for 3D Graphics Compression Model (3DGCM)
BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A23:2021 23:2010, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 23: Synthesized texture reference software
BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A24/Cor1:2021 24:2009/Cor 1:2012, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 24: Reference software for AAC-ELD — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A24/Cor2:2021 24:2009/Cor 2:2013, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 24: Reference software for AAC-ELD — Technical Corrigendum 2 BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A24/Cor3:2021 24:2009/Cor 3:2017, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 24: Reference software for AAC-ELD — Technical Corrigendum 3 BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A24:2021 24:2009, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 24: Reference software for AAC-ELD BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A25:2021 25:2009, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 25: Reference software for scene partitioning
23 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A26:2021 26:2011, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 26: Reference software for scalable complexity 3D mesh coding in 3DG compression model BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A27/Cor1:2021 27:2011/Cor 1:2015, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 27: Scalable complexity 3D mesh coding reference software — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A27:2021 27:2011, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 27: Scalable complexity 3D mesh coding reference software BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A28:2021 28:2011, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 28: Reference software for LASeR adaptation tools BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A29:2021 29:2011, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 29: Reference software for LASeR presentation and modification of structured information (PMSI) tools BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A30:2021 30:2011, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 30: ExtendedCore2D reference software BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A31:2021 31:2012, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 31: Reference software for efficient representation of 3D meshes with multiple attributes
24 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A33:2021 33:2015, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 33: Reference software for MVC plus depth extension of AVC BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A34:2021 34:2014, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 34: Reference software of the multi- resolution frame compatible stereo coding of AVC BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A35:2021 35:2015, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 35: 3D-AVC Reference software BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A36:2021 36:2015, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 36: Pattern-based 3D mesh coding reference software BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A37:2021 37:2015, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 37: New levels for the AAC profiles, uniDRC support, AAC block length parameter corrections BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A39:2021 39:2016, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 39: Reference software for the Multi- resolution Frame Compatible Stereo Coding with Depth Maps of AVC BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A40:2021 40:2019, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 40: Printing material and 3D graphics coding for browsers reference software
25 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A41:2021 41:2019, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 41: Reference software for internet video coding BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A42:2021 42:2017, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 42: Reference software for the alternative depth information SEI message extension of AVC BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40 10.99 5/A43:2021 43:2018, IDT audio-visual objects — Part 5: Reference software — Amendment 43: New levels of ALS simple profile, SBR enhancements BAS/TC 1 prBAS ISO/IEC 14496- ISO/IEC 14496-5:2001/Amd Information technology — Coding of ko en,fr 35.040.40, 10.99 5/A5/Cor1:2021 5:2004/Cor 1:2011, IDT audio-visual objects — Part 5: 35.040 Reference software — Amendment 5: Reference software extensions for error resilient simple scalable profile — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 14776-224:2021 ISO/IEC 14776-224:2019, IDT Information technology - Small computer ko en,fr 35.200 10.99 system interface (SCSI) - Part 224: Fibre Channel Protocol for SCSI, fourth version (FCP-4) BAS/TC 1 prBAS ISO/IEC 19784- ISO/IEC 19784-2:2007/Cor Information technology — Biometric ko en,fr 35.040, 10.99 2/Cor1:2021 1:2011, IDT application programming interface — 35.240.15 Part 2: Biometric archive function provider interface — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 19784- ISO/IEC 19784-2:2007/Cor Information technology — Biometric ko en,fr 35.040, 10.99 2/Cor2:2021 2:2013, IDT application programming interface — 35.240.15 Part 2: Biometric archive function provider interface — Technical Corrigendum 2
26 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 19784- ISO/IEC 19784-4:2011/Cor Information technology — Biometric ko en,fr 35.040, 10.99 4/Cor1:2021 1:2013, IDT application programming interface — 35.240.15 Part 4: Biometric sensor function provider interface — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 19785-2/A1:2021 ISO/IEC 19785-2:2006/Amd Information technology — Common ko en,fr 35.040, 10.99 1:2010, IDT Biometric Exchange Formats 35.240.15 Framework — Part 2: Procedures for the operation of the Biometric Registration Authority — Amendment 1: Additional registrations BAS/TC 1 prBAS ISO/IEC 19785- ISO/IEC 19785-4:2010/Cor Information technology — Common ko en,fr 35.040, 10.99 4/Cor1:2021 1:2013, IDT Biometric Exchange Formats 35.240.15 Framework — Part 4: Security block format specifications — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 19788-3/A1:2021 ISO/IEC 19788-3:2011/Amd Information technology — Learning, ko en,fr 35.240.90, 10.99 1:2016, IDT education and training — Metadata for 35.240.99, learning resources — Part 3: Basic 03.100.30 application profile — Amendment 1
BAS/TC 1 prBAS ISO/IEC 19794- ISO/IEC 19794-11:2013/Amd Information technology — Biometric ko en,fr 35.040, 10.99 11/A1:2021 1:2014, IDT data interchange formats — Part 11: 35.240.15 Signature/sign processed dynamic data — Amendment 1: Conformance test assertions BAS/TC 1 prBAS ISO/IEC 19794- ISO/IEC 19794-7:2007/Cor Information technology — Biometric ko en,fr 35.040, 10.99 7/Cor1:2021 1:2009, IDT data interchange formats — Part 7: 35.240.15 Signature/sign time series data — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 19794-8/A1:2021 ISO/IEC 19794-8:2011/Amd Information technology — Biometric ko en,fr 35.040, 10.99 1:2014, IDT data interchange formats — Part 8: 35.240.15 Finger pattern skeletal data — Amendment 1: Conformance testing methodology
27 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 19794- ISO/IEC 19794-8:2011/Cor Information technology — Biometric ko en,fr 35.040, 10.99 8/Cor1:2021 1:2012, IDT data interchange formats — Part 8: 35.240.15 Finger pattern skeletal data — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 19794-9/A1:2021 ISO/IEC 19794-9:2011/Amd Information technology — Biometric ko en,fr 35.040, 10.99 1:2013, IDT data interchange formats — Part 9: 35.240.15 Vascular image data — Amendment 1: Conformance testing methodology BAS/TC 1 prBAS ISO/IEC 19794-9/A2:2021 ISO/IEC 19794-9:2011/Amd Information technology — Biometric ko en,fr 35.040, 10.99 2:2015, IDT data interchange formats — Part 9: 35.240.15 Vascular image data — Amendment 2: XML Encoding and clarification of defects BAS/TC 1 prBAS ISO/IEC 19794- ISO/IEC 19794-9:2011/Cor Information technology — Biometric ko en,fr 35.040, 10.99 9/Cor1:2021 1:2012, IDT data interchange formats — Part 9: 35.240.15 Vascular image data — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 19795-2/A1:2021 ISO/IEC 19795-2:2007/Amd Information technology — Biometric ko en,fr 35.040, 10.99 1:2015, IDT performance testing and reporting — 35.240.15 Part 2: Testing methodologies for technology and scenario evaluation — Amendment 1: Testing of multimodal biometric implementations BAS/TC 1 prBAS ISO/IEC 19941:2021 ISO/IEC 19941:2017, IDT Information technology - Cloud ko en,fr 35.210, 10.99 computing - Interoperability and 35.020, portability 01.040.35 BAS/TC 1 prBAS ISO/IEC 19944-1:2021 ISO/IEC 19944-1:2020, IDT Cloud computing and distributed ko en,fr 35.210 10.99 platforms ─ Data flow, data categories and data use - Part 1: Fundamentals BAS/TC 1 prBAS ISO/IEC 19989-1:2021 ISO/IEC 19989-1:2020, IDT Information security - Criteria and ko en,fr 35.030 10.99 methodology for security evaluation of biometric systems - Part 1: Framework
BAS/TC 1 prBAS ISO/IEC 19989-2:2021 ISO/IEC 19989-2:2020, IDT Information security - Criteria and ko en,fr 35.030 10.99 methodology for security evaluation of biometric systems - Part 2: Biometric recognition performance
28 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 19989-3:2021 ISO/IEC 19989-3:2020, IDT Information security - Criteria and ko en,fr 35.030 10.99 methodology for security evaluation of biometric systems - Part 3: Presentation attack detection BAS/TC 1 prBAS ISO/IEC 20085-2:2021 ISO/IEC 20085-2:2020, IDT IT Security techniques - Test tool ko en,fr 35.030 10.99 requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules - Part 2: Test calibration methods and apparatus BAS/TC 1 prBAS ISO/IEC 20547-3:2021 ISO/IEC 20547-3:2020, IDT Information technology - Big data ko en,fr 35.020 10.99 reference architecture - Part 3: Reference architecture BAS/TC 1 prBAS ISO/IEC 20547-4:2021 ISO/IEC 20547-4:2020, IDT Information technology - Big data ko en,fr 35.020 10.99 reference architecture - Part 4: Security and privacy BAS/TC 1 prBAS ISO/IEC 21823-2:2021 ISO/IEC 21823-2:2020, IDT Internet of things (IoT) - Interoperability ko en,fr 35.020 10.99 for IoT systems - Part 2: Transport interoperability BAS/TC 1 prBAS ISO/IEC 21836:2021 ISO/IEC 21836:2020, IDT Information technology - Data centres - ko en,fr 35.020 10.99 Server energy effectiveness metric BAS/TC 1 prBAS ISO/IEC 22624:2021 ISO/IEC 22624:2020, IDT Information technology - Cloud ko en,fr 35.210 10.99 computing - Taxonomy based data handling for cloud services BAS/TC 1 prBAS ISO/IEC 23009-5/A1:2021 ISO/IEC 23009-5:2017/Amd Information technology — Dynamic ko en,fr 35.040.40 10.99 1:2020, IDT adaptive streaming over HTTP (DASH) — Part 5: Server and network assisted DASH (SAND) — Amendment 1: Improvements on SAND messages BAS/TC 1 prBAS ISO/IEC 27007:2021 ISO/IEC 27007:2020, IDT Information security, cybersecurity and ko en,fr 35.030, 10.99 privacy protection - Guidelines for 03.100.70, information security management 03.120.20 systems auditing BAS/TC 1 prBAS ISO/IEC 27009:2021 ISO/IEC 27009:2020, IDT Information security, cybersecurity and ko en,fr 35.030, 10.99 privacy protection - Sector-specific 03.100.70, application of ISO/IEC 27001 - 03.120.20 Requirements
29 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 27035-3:2021 ISO/IEC 27035-3:2020, IDT Information technology - Information ko en,fr 35.030 10.99 security incident management - Part 3: Guidelines for ICT incident response operations BAS/TC 1 prBAS ISO/IEC 27050-3:2021 ISO/IEC 27050-3:2020, IDT Information technology - Electronic ko en,fr 35.030 10.99 discovery - Part 3: Code of practice for electronic discovery BAS/TC 1 prBAS ISO/IEC 29109- ISO/IEC 29109-1:2009/Cor Information technology — Conformance ko en,fr 35.040, 10.99 1/Cor1:2021 1:2010, IDT testing methodology for biometric data 35.240.15 interchange formats defined in ISO/IEC 19794 — Part 1: Generalized conformance testing methodology — Technical Corrigendum 1
BAS/TC 1 prBAS ISO/IEC 29109- ISO/IEC 29109-4:2010/Cor Information technology — Conformance ko en,fr 35.040, 10.99 4/Cor1:2021 1:2011, IDT testing methodology for biometric data 35.240.15 interchange formats defined in ISO/IEC 19794 — Part 4: Finger image data — Technical Corrigendum 1
BAS/TC 1 prBAS ISO/IEC 29184:2021 ISO/IEC 29184:2020, IDT Information technology - Online privacy ko en,fr 35.030 10.99 notices and consent BAS/TC 1 prBAS ISO/IEC 30105-3/A1:2021 ISO/IEC 30105-3:2016/Amd Information technology — IT Enabled ko en,fr 35.020 10.99 1:2020, IDT Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 3: Measurement framework (MF) and organization maturity model (OMM) — Amendment 1 BAS/TC 1 prBAS ISO/IEC 30106-1/A1:2021 ISO/IEC 30106-1:2016/Amd Information technology — Object ko en,fr 35.040, 10.99 1:2019, IDT oriented BioAPI — Part 1: Architecture 35.240.15 — Amendment 1: Additional specifications and conformance statements BAS/TC 1 prBAS ISO/IEC 30111:2021 ISO/IEC 30111:2019, IDT Information technology - Security ko en,fr 35.030, 10.99 techniques - Vulnerability handling 35.040 processes
30 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 30129/A1:2021 ISO/IEC 30129:2015/Amd Information technology — ko en,fr 35.200 10.99 1:2019, IDT Telecommunications bonding networks for buildings and other structures — Amendment 1 BAS/TC 1 prBAS ISO/IEC 30142:2021 ISO/IEC 30142:2020, IDT Information technology - Underwater ko en,fr 35.110 10.99 acoustic sensor network (UWASN) - Network management system overview and requirements BAS/TC 1 prBAS ISO/IEC 30143:2021 ISO/IEC 30143:2020, IDT Information technology - Underwater ko en,fr 35.110 10.99 acoustic sensor network (UWASN) - Application profiles BAS/TC 1 prBAS ISO/IEC 30190/A1:2021 ISO/IEC 30190:2016/Amd Information technology — Digitally ko en,fr 35.220.30 10.99 1:2019, IDT recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Recordable disk — Amendment 1 BAS/TC 1 prBAS ISO/IEC 30191/A1:2021 ISO/IEC 30191:2015/Amd Information technology — Digitally ko en,fr 35.220.30 10.99 1:2019, IDT recorded media for information interchange and storage — 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk — Amendment 1 BAS/TC 1 prBAS ISO/IEC 30192/A1:2021 ISO/IEC 30192:2016/Amd Information technology — Digitally ko en,fr 35.220.30 10.99 1:2019, IDT recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk — Amendment 1 BAS/TC 1 prBAS ISO/IEC 38506:2021 ISO/IEC 38506:2020, IDT Information technology - Governance of ko en,fr 35.020 10.99 IT - Application of ISO/IEC 38500 to the governance of IT enabled investments
31 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 8824-1/A1:2021 ISO/IEC 8824-1:2015/Amd Information technology — Abstract ko en,fr 35.100.60 10.99 1:2019, IDT Syntax Notation One (ASN.1): Specification of basic notation — Part 1: — Amendment 1: Relaxing imports clause to allow importation of definitions from new versions of a given module
BAS/TC 1 prBAS ISO/IEC 9075- ISO/IEC 9075-11:2016/Cor Information technology — Database ko en,fr 35.060 10.99 11/Cor1:2021 1:2019, IDT languages — SQL — Part 11: Information and definition schemas (SQL/Schemata) — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 9075- ISO/IEC 9075-13:2016/Cor Information technology — Database ko en,fr 35.060 10.99 13/Cor1:2021 1:2019, IDT languages — SQL — Part 13: SQL Routines and types using the Java TM programming language (SQL/JRT) — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 9075- ISO/IEC 9075-14:2016/Cor Information technology — Database ko en,fr 35.060 10.99 14/Cor1:2021 1:2019, IDT languages — SQL — Part 14: XML- Related Specifications (SQL/XML) — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 9075-2/Cor1:2021 ISO/IEC 9075-2:2016/Cor Information technology — Database ko en,fr 35.060 10.99 1:2019, IDT languages — SQL — Part 2: Foundation (SQL/Foundation) — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 9075-4/Cor1:2021 ISO/IEC 9075-4:2016/Cor Information technology — Database ko en,fr 35.060 10.99 1:2019, IDT languages — SQL — Part 4: Persistent stored modules (SQL/PSM) — Technical Corrigendum 1 BAS/TC 1 prBAS ISO/IEC 9075-9/Cor1:2021 ISO/IEC 9075-9:2016/Cor Information technology — Database ko en,fr 35.060 10.99 1:2019, IDT languages — SQL — Part 9: Management of External Data (SQL/MED) — Technical Corrigendum 1
32 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC 9797-3/A1:2021 ISO/IEC 9797-3:2011/Amd Information technology — Security ko en,fr 35.030 10.99 1:2020, IDT techniques — Message Authentication Codes (MACs) — Part 3: Mechanisms using a universal hash-function — Amendment 1 BAS/TC 1 prBAS ISO/IEC TR 20547-1:2021 ISO/IEC TR 20547-1:2020, IDT Information technology - Big data ko en,fr 35.020 10.99 reference architecture - Part 1: Framework and application process BAS/TC 1 prBAS ISO/IEC TR 22446:2021 ISO/IEC TR 22446:2017, IDT Information technology - Continual ko en,fr 35.020, 10.99 performance improvement of IT enabled 03.080.99 services BAS/TC 1 prBAS ISO/IEC TR 23187:2021 ISO/IEC TR 23187:2020, IDT Information technology - Cloud ko en,fr 35.210 10.99 computing - Interacting with cloud service partners (CSNs) BAS/TC 1 prBAS ISO/IEC TR 23188:2021 ISO/IEC TR 23188:2020, IDT Information technology - Cloud ko en,fr 35.210 10.99 computing - Edge computing landscape
BAS/TC 1 prBAS ISO/IEC TR 23613:2021 ISO/IEC TR 23613:2020, IDT Information technology - Cloud ko en,fr 35.210 10.99 computing - Cloud service metering elements and billing modes BAS/TC 1 prBAS ISO/IEC TR 23951:2021 ISO/IEC TR 23951:2020, IDT Information technology - Cloud ko en,fr 35.210 10.99 computing - Guidance for using the cloud SLA metric model BAS/TC 1 prBAS ISO/IEC TR 24028:2021 ISO/IEC TR 24028:2020, IDT Information technology - Artificial ko en,fr 35.020 10.99 intelligence - Overview of trustworthiness in artificial intelligence BAS/TC 1 prBAS ISO/IEC TR ISO/IEC TR 29106:2007/Amd Information technology — Generic ko en,fr 35.240.99, 10.99 29106/A2:2021 2:2019, IDT cabling — Introduction to the MICE 35.200 environmental classification — Amendment 2 BAS/TC 1 prBAS ISO/IEC TR 30105-7:2021 ISO/IEC TR 30105-7:2019, IDT Information technology - IT Enabled ko en,fr 35.020 10.99 Services-Business Process Outsourcing (ITES-BPO) lifecycle processes - Part 7: Exemplar for maturity assessment
BAS/TC 1 prBAS ISO/IEC TR 30148:2021 ISO/IEC TR 30148:2019, IDT Internet of Things (IoT) - Technical ko en,fr 35.110 10.99 requirements and application of sensor network for wireless gas meters.
33 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 1 prBAS ISO/IEC TR 30164:2021 ISO/IEC TR 30164:2020, IDT Internet of things (IoT) - Edge computing ko en,fr 35.020 10.99
BAS/TC 1 prBAS ISO/IEC TR 30166:2021 ISO/IEC TR 30166:2020, IDT Internet of things (IoT) - Industrial IoT ko en,fr 35.020 10.99 BAS/TC 1 prBAS ISO/IEC TR 38502:2021 ISO/IEC TR 38502:2017, IDT Information technology - Governance of ko en,fr 35.020 10.99 IT - Framework and model BAS/TC 1 prBAS ISO/IEC TS 23167:2021 ISO/IEC TS 23167:2020, IDT Information technology - Cloud ko en,fr 35.210 10.99 computing - Common technologies and techniques BAS/TC 1 prBAS ISO/IEC TS ISO/IEC TS 29125:2017/Amd Information technology — ko en,fr 35.200 10.99 29125/A1:2021 1:2020, IDT Telecommunications cabling requirements for remote powering of terminal equipment — Amendment 1 BAS/TC 1 prBAS ISO/IEC/IEEE 26512:2021 ISO/IEC/IEEE 26512:2018, IDT Systems and software engineering - ko en,fr 35.080 10.99 Requirements for acquirers and suppliers of information for users BAS/TC 1 prBAS ISO/TR 23244:2021 ISO/TR 23244:2020, IDT Blockchain and distributed ledger ko en,fr 35.030, 10.99 technologies - Privacy and personally 35.240.99, identifiable information protection 35.240.40 considerations BAS/TC 1 prBAS ISO/TR 23455:2021 ISO/TR 23455:2019, IDT Blockchain and distributed ledger ko en,fr 35.030, 10.99 technologies - Overview of and 35.240.99, interactions between smart contracts in 35.240.40 blockchain and distributed ledger technology systems BAS/TC 2 psBAS EN ISO 15614-1:2020 EN ISO 15614-1:2017/A1:2019, Specification and qualification of welding pv bs,en 25.160.10 50.99 IDT; EN ISO 15614-1:2017, IDT; procedures for metallic materials - ISO 15614-1:2017/Amd 1:2019, Welding procedure test - Part 1: Arc and IDT; ISO 15614-1:2017, IDT gas welding of steels and arc welding of nickel and nickel alloys
BAS/TC 2 prBAS EN ISO 25239-1:2021 EN ISO 25239-1:2020, IDT; ISO Friction stir welding - Aluminium - Part 1: pr en 01.040.25, 10.99 25239-1:2020, IDT Vocabulary 25.160.10 BAS/TC 2 prBAS EN ISO 25239-2:2021 EN ISO 25239-2:2020, IDT; ISO Friction stir welding - Aluminium - Part 2: pr en 25.160.40, 10.99 25239-2:2020, IDT Design of weld joints 25.160.10 BAS/TC 2 prBAS EN ISO 25239-3:2021 EN ISO 25239-3:2020, IDT; ISO Friction stir welding - Aluminium - Part 3: pr en 25.160.10, 10.99 25239-3:2020, IDT Qualification of welding operators 25.160.01
34 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 2 prBAS EN ISO 25239-4:2021 EN ISO 25239-4:2020, IDT; ISO Friction stir welding - Aluminium - Part 4: pr en 25.160.10 10.99 25239-4:2020, IDT Specification and qualification of welding procedures BAS/TC 2 prBAS EN ISO 25239-5:2021 EN ISO 25239-5:2020, IDT; ISO Friction stir welding - Aluminium - Part 5: pr en 25.160.10 10.99 25239-5:2020, IDT Quality and inspection requirements
BAS/TC 2 prBAS EN ISO 15607:2021 EN ISO 15607:2019, IDT; ISO Specification and qualification of welding pr en 25.160.10 10.99 15607:2019, IDT procedures for metallic materials - General rules BAS/TC 2 prBAS EN ISO 9090:2021 EN ISO 9090:2019, IDT; ISO Gas tightness of equipment for gas pr en 25.160.30 10.99 9090:2019, IDT welding and allied processes BAS/TC 2 prBAS EN ISO 6947:2021 EN ISO 6947:2019, IDT; ISO Welding and allied processes - Welding pr en 25.160.40 10.99 6947:2019, IDT positions BAS/TC 2 prBAS EN ISO 21904-1:2021 EN ISO 21904-1:2020, IDT; ISO Health and safety in welding and allied pr en 13.040.40, 10.99 21904-1:2020, IDT processes - Equipment for capture and 25.160.30, separation of welding fume - Part 1: 25.160.01, General requirements 13.100 BAS/TC 2 prBAS EN ISO 21904-2:2021 EN ISO 21904-2:2020, IDT; ISO Health and safety in welding and allied pr en 13.040.40, 10.99 21904-2:2020, IDT processes - Equipment for capture and 25.160.30, separation of welding fume - Part 2: 25.160.01, Requirements for testing and marking of 13.100 separation efficiency BAS/TC 2 prBAS EN ISO 21904-4:2021 EN ISO 21904-4:2020, IDT; ISO Health and safety in welding and allied pr en 25.160.30, 10.99 21904-4:2020, IDT processes - Equipment for capture and 25.160.01, separation of welding fume - Part 4: 13.100 Determination of the minimum air volume flow rate of capture devices BAS/TC 2 prBAS EN ISO 9455-3:2021 EN ISO 9455-3:2020, IDT; ISO Soft soldering fluxes - Test methods - pr en 25.160.50 10.99 9455-3:2019, IDT Part 3: Determination of acid value, potentiometric and visual titration methods BAS/TC 2 prBAS EN ISO 10863:2021 EN ISO 10863:2020, IDT; ISO Non-destructive testing of welds - pr en 25.160.40 10.99 10863:2020, IDT Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
35 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 2 prBAS EN ISO 13919-1:2021 EN ISO 13919-1:2019, IDT; ISO Electron and laser-beam welded joints - pr en 25.160.40 10.99 13919-1:2019, IDT Requirements and recommendations on quality levels for imperfections - Part 1: Steel, nickel, titanium and their alloys
BAS/TC 2 prBAS EN ISO 15609-2:2021 EN ISO 15609-2:2019, IDT; ISO Specification and qualification of welding pr en 25.160.10 10.99 15609-2:2019, IDT procedures for metallic materials - Welding procedure specification - Part 2: Gas welding BAS/TC 2 prBAS EN ISO 15614-7:2021 EN ISO 15614-7:2019, IDT; ISO Specification and qualification of welding pr en 25.160.10 10.99 15614-7:2016, IDT procedures for metallic materials - Welding procedure test - Part 7: Overlay welding BAS/TC 2 prBAS EN ISO 9455-16:2021 EN ISO 9455-16:2019, IDT; ISO Soft soldering fluxes - Test methods - pr en 25.160.50 10.99 9455-16:2019, IDT Part 16: Flux efficacy test, wetting balance method BAS/TC 2 prBAS CEN ISO/TR 20174:2021 CEN ISO/TR 20174:2020, IDT; Welding - Grouping systems for pr en 25.160.20 10.99 ISO/TR 20174:2020, IDT materials - Japanese materials BAS/TC 2 prBAS EN ISO 24034:2021 EN ISO 24034:2020, IDT; ISO Welding consumables - Solid wire pr en 25.160.20 10.99 24034:2020, IDT electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification BAS/TC 3 prBAS EN ISO/IEC 17000:2021 EN ISO/IEC 17000:2020, IDT; Conformity assessment - Vocabulary pr en 03.120.20, 10.99 ISO/IEC 17000:2020, IDT and general principles 01.040.03 BAS/TC 3 prBAS EN ISO/IEC 17029:2021 EN ISO/IEC 17029:2019, IDT; Conformity Assessment - General pr en 03.120.20 10.99 ISO/IEC 17029:2019, IDT principles and requirements for validation and verification bodies BAS/TC 3 prBAS ISO/IEC TR 17032:2021 ISO/IEC TR 17032:2019, IDT Conformity assessment - Guidelines ko en 03.120.20 10.99 and examples of a scheme for the certification of processes BAS/TC 3 prBAS ISO 56002:2021 ISO 56002:2019, IDT Innovation management - Innovation ko en 03.100.70, 10.99 management system - Guidance 03.100.40, 03.100.01 BAS/TC 3 prBAS ISO 56003:2021 ISO 56003:2019, IDT Innovation management - Tools and ko en 03.100.40, 10.99 methods for innovation partnership - 03.100.01 Guidance BAS/TC 3 prBAS ISO 31022:2021 ISO 31022:2020, IDT Risk management - Guidelines for the ko en 03.100.01 10.99 management of legal risk
36 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 3 prBAS ISO 56000:2021 ISO 56000:2020, IDT Innovation management - Fundamentals ko en 03.100.40, 10.99 and vocabulary 03.100.01, 01.040.03 BAS/TC 3 prBAS ISO 10015:2021 ISO 10015:2019, IDT Quality management - Guidelines for ko en 03.120.10, 10.99 competence management and people 03.100.30 development BAS/TC 3 prBAS ISO/TR 56004:2021 ISO/TR 56004:2019, IDT Innovation Management Assessment - ko en 03.100.40, 10.99 Guidance 03.100.01 BAS/TC 3 prBAS ISO 10018:2021 ISO 10018:2020, IDT Quality management - Guidance for ko en 03.120.10, 10.99 people engagement 03.100.30 BAS/TC 3 prBAS ISO/TS 55010:2021 ISO/TS 55010:2019, IDT Asset management - Guidance on the ko en 03.100.01 10.99 alignment of financial and non-financial functions in asset management BAS/TC 3 prBAS ISO/TS 54001:2021 ISO/TS 54001:2019, IDT Quality management systems - ko en 03.100.70, 10.99 Particular requirements for the 03.160 application of ISO 9001:2015 for electoral organizations at all levels of government BAS/TC 3 prBAS IWA 31:2021 IWA 31:2020, IDT Risk management - Guidelines on using ko en 03.100.01 10.99 ISO 31000 in management systems
BAS/TC 3 prBAS ISO 29991:2021 ISO 29991:2020, IDT Language-learning services - ko en 03.180 10.99 Requirements BAS/TC 3 prBAS ISO/IEC TS 17021- ISO/IEC TS 17021-12:2020, IDT Conformity assessment - Requirements ko en 03.120.20 10.99 12:2021 for bodies providing audit and certification of management systems - Part 12: Competence requirements for auditing and certification of collaborative business relationship management systems BAS/TC 4 prBAS EN 1676:2021 EN 1676:2020, IDT Aluminium and aluminium alloys - pr en 77.120.10, 10.99 Alloyed ingots for remelting - 77.150.10 Specifications BAS/TC 4 prBAS EN 1706:2021 EN 1706:2020, IDT Aluminium and aluminium alloys - pr en 77.150.10 10.99 Castings - Chemical composition and mechanical properties
37 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 4 prBAS EN ISO 2106:2021 EN ISO 2106:2020, IDT; ISO Anodizing of aluminium and its alloys - pr en 25.220.20 10.99 2106:2019, IDT Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method BAS/TC 4 prBAS EN 1971-2:2021 EN 1971-2:2019, IDT Copper and copper alloys - Eddy current pr en 23.040.15, 10.99 test for measuring defects on seamless 77.150.30 round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface BAS/TC 4 prBAS EN 1971-1:2021 EN 1971-1:2019, IDT Copper and copper alloys - Eddy current pr en 23.040.15, 10.99 test for measuring defects on seamless 77.150.30 round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface BAS/TC 4 prBAS EN 16090:2021 EN 16090:2019, IDT Copper and copper alloys - Estimation pr en 77.120.30 10.99 of average grain size by ultrasound BAS/TC 4 prBAS EN 12735-1:2021 EN 12735-1:2020, IDT Copper and copper alloys - Seamless, pr en 23.040.15 10.99 round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems BAS/TC 4 prBAS CEN/TS 13388:2021 CEN/TS 13388:2020, IDT Copper and copper alloys - pr en 77.150.30, 10.99 Compendium of compositions and 77.120.30 products BAS/TC 4 prBAS EN 12449+A1:2021 EN 12449:2016+A1:2019, IDT Copper and copper alloys - Seamless, pr en 23.040.15, 10.99 round tubes for general purposes 77.120.30 BAS/TC 4 prBAS EN ISO 4947:2021 EN ISO 4947:2020, IDT; ISO Steel and cast iron - Determination of pr en 77.080.01 10.99 4947:2020, IDT vanadium content - Potentiometric titration method BAS/TC 4 prBAS EN ISO 4885:2021 EN ISO 4885:2017, IDT; ISO Ferrous materials - Heat treatments - pr en 25.200, 10.99 4885:2017, IDT Vocabulary 01.040.25, 77.140.01, 77.080.01, 01.040.77 BAS/TC 4 prBAS EN ISO 6931-1:2021 EN ISO 6931-1:2020, IDT; ISO Stainless steels for springs - Part 1: pr en 77.140.25 10.99 6931-1:2016, IDT Wire
38 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 4 prBAS EN 10216-2+A1:2021 EN 10216-2:2013+A1:2019, IDT Seamless steel tubes for pressure pr en 77.140.75, 10.99 purposes - Technical delivery conditions 23.040.10 - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties BAS/TC 4 prBAS EN ISO 439:2021 EN ISO 439:2020, IDT; ISO Steel and cast irons - Determination of pr en 77.080.01 10.99 439:2020, IDT silicon content - Gravimetric method BAS/TC 4 prBAS EN ISO 3183:2021 EN ISO 3183:2019, IDT; ISO Petroleum and natural gas industries - pr en 75.200, 10.99 3183:2019, IDT Steel pipe for pipeline transportation 77.140.75, systems 23.040.10 BAS/TC 4 prBAS EN ISO 10113:2021 EN ISO 10113:2020, IDT; ISO Metallic materials - Sheet and strip - pr en 77.040.10 10.99 10113:2020, IDT Determination of plastic strain ratio BAS/TC 4 prBAS EN ISO 643:2021 EN ISO 643:2020, IDT; ISO Steels - Micrographic determination of pr en 77.040.99 10.99 643:2019, IDT the apparent grain size BAS/TC 4 prBAS EN 10139+A1:2021 EN 10139:2016+A1:2020, IDT Cold rolled uncoated low carbon steel pr en 77.140.50 10.99 narrow strip for cold forming - Technical delivery conditions BAS/TC 4 prBAS EN ISO 6892-1:2021 EN ISO 6892-1:2019, IDT; ISO Metallic materials - Tensile testing - Part pr en 77.040.10 10.99 6892-1:2019, IDT 1: Method of test at room temperature
BAS/TC 4 prBAS CEN/TR 10317:2021 CEN/TR 10317:2020, IDT European certified reference materials pr en 77.140, 10.99 (EURONORM-CRMs) for the 77.140.01, determination of the chemical 71.040.30 composition of iron and steel products BAS/TC 4 prBAS EN ISO 4489:2021 EN ISO 4489:2019, IDT; ISO Hardmetals - Sampling and testing pr en 77.160, 10.99 4489:2019, IDT 77.040.10 BAS/TC 4 prBAS EN ISO 4497:2021 EN ISO 4497:2020, IDT; ISO Metallic powders - Determination of pr en 77.160 10.99 4497:2020, IDT particle size by dry sieving BAS/TC 4 prBAS EN ISO 4884:2021 EN ISO 4884:2019, IDT; ISO Hardmetals - Sampling and testing of pr en 77.160, 10.99 4884:2019, IDT powders using sintered test pieces 77.040.10 BAS/TC 4 prBAS EN ISO 4499-1:2021 EN ISO 4499-1:2020, IDT; ISO Hardmetals - Metallographic pr en 77.160, 10.99 4499-1:2020, IDT determination of microstructure - Part 1: 77.040.99 Photomicrographs and description BAS/TC 4 prBAS EN ISO 4499-2:2021 EN ISO 4499-2:2020, IDT; ISO Hardmetals - Metallographic pr en 77.160, 10.99 4499-2:2020, IDT determination of microstructure - Part 2: 77.040.99 Measurement of WC grain size
39 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 4 prBAS EN ISO 13517:2021 EN ISO 13517:2020, IDT; ISO Metallic powders - Determination of flow pr en 77.160 10.99 13517:2020, IDT rate by means of a calibrated funnel (Gustavsson flowmeter) BAS/TC 4 prBAS EN ISO 6501:2021 EN ISO 6501:2020, IDT; ISO Ferronickel - Specification and delivery pr en 77.100 10.99 6501:2020, IDT requirements BAS/TC 4 prBAS EN ISO 7526:2021 EN ISO 7526:2020, IDT; ISO Ferronickels - Determination of sulfur pr en 77.120.40, 10.99 7526:2020, IDT content - Infrared absorption method 77.100 after induction furnace combustion BAS/TC 4 prBAS ISO 16573-1:2021 ISO 16573-1:2020, IDT Steel - Measurement method for the ko en 77.040.99 10.99 evaluation of hydrogen embrittlement resistance of high strength steels - Part 1: Constant load test BAS/TC 4 prBAS CEN/TS 13388/Cor 1:2021 CEN/TS 13388:2020/AC:2020, Copper and copper alloys - pr en 77.150.30, 10.99 IDT Compendium of compositions and 77.120.30 products BAS/TC 4 prBAS EN 10372:2021 EN 10372:2020, IDT Quality tracking system for flat steel pr en 35.040.50, 10.99 products using barcode - Printing, 77.140.50 reading and information processing BAS/TC 4 prBAS EN ISO 21809-3/A1:2021 EN ISO 21809-3:2016/A1:2020, Petroleum and natural gas industries - pr en 87.040, 10.99 IDT; ISO 21809-3:2016/Amd External coatings for buried or 75.200, 1:2020, IDT submerged pipelines used in pipeline 23.040.10 transportation systems - Part 3: Field joint coatings - Amendment 1: Introduction of mesh-backed coating systems BAS/TC 4 prBAS EN ISO 10893-1/A1:2021 EN ISO 10893-1:2011/A1:2020, Non-destructive testing of steel tubes - pr en 77.140.75, 10.99 IDT; ISO 10893-1:2011/Amd Part 1: Automated electromagnetic 77.040.20, 1:2020, IDT testing of seamless and welded (except 23.040.10 submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
40 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 4 prBAS EN ISO 10893-2/A1:2021 EN ISO 10893-2:2011/A1:2020, Non-destructive testing of steel tubes - pr en 77.140.75, 10.99 IDT; ISO 10893-2:2011/Amd Part 2: Automated eddy current testing 77.040.20, 1:2020, IDT of seamless and welded (except 23.040.10 submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria BAS/TC 4 prBAS EN ISO 10893-3/A2:2021 EN ISO 10893-3:2011/A2:2020, Non-destructive testing of steel tubes - pr en 77.140.75, 10.99 IDT; ISO 10893-3:2011/Amd Part 3: Automated full peripheral flux 77.040.20, 2:2020, IDT leakage testing of seamless and welded 23.040.10 (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria BAS/TC 4 prBAS EN ISO 10893-8/A1:2021 EN ISO 10893-8:2011/A1:2020, Non-destructive testing of steel tubes - pr en 77.140.75, 10.99 IDT; ISO 10893-8:2011/Amd Part 8: Automated ultrasonic testing of 77.040.20, 1:2020, IDT seamless and welded steel tubes for the 23.040.10 detection of laminar imperfections - Amendment 1: Change acceptance criteria BAS/TC 4 prBAS EN ISO 10893-9/A1:2021 EN ISO 10893-9:2011/A1:2020, Non-destructive testing of steel tubes - pr en 77.140.75, 10.99 IDT; ISO 10893-9:2011/Amd Part 9: Automated ultrasonic testing for 77.040.20, 1:2020, IDT the detection of laminar imperfections in 23.040.10 strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria
BAS/TC 4 prBAS EN ISO 10893-10/A1:2021 EN ISO 10893-10:2011/A1:2020, Non-destructive testing of steel tubes - pr en 77.140.75, 10.99 IDT; ISO 10893-10:2011/Amd Part 10: Automated full peripheral 77.040.20, 1:2020, IDT ultrasonic testing of seamless and 23.040.10 welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
41 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 4 prBAS EN ISO 10893-11/A1:2021 EN ISO 10893-11:2011/A1:2020, Non-destructive testing of steel tubes - pr en 77.140.75, 10.99 IDT; ISO 10893-11:2011/Amd Part 11: Automated ultrasonic testing of 77.040.20, 1:2020, IDT the weld seam of welded steel tubes for 23.040.10 the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
BAS/TC 4 prBAS EN ISO 10893-12/A1:2021 EN ISO 10893-12:2011/A1:2020, Non-destructive testing of steel tubes - pr en 77.140.75, 10.99 IDT; ISO 10893-12:2011/Amd Part 12: Automated full peripheral 77.040.20, 1:2020, IDT ultrasonic thickness testing of seamless 23.040.10 and welded (except submerged arc- welded) steel tubes - Amendment 1: Change of acceptance criteria
BAS/TC 4 prBAS ISO 8794:2021 ISO 8794:2020, IDT Steel wire ropes - Spliced eye ko en 77.140.65 10.99 terminations for slings BAS/TC 4 prBAS ISO 9647:2021 ISO 9647:2020, IDT Steel - Determination of vanadium ko en 77.080.01 10.99 content - Flame atomic absorption spectrometric method (FAAS) BAS/TC 4 prBAS ISO 17804:2021 ISO 17804:2020, IDT Founding - Ausferritic spheroidal ko en 77.080.10 10.99 graphite cast irons - Classification BAS/TC 4 prBAS ISO 19959:2021 ISO 19959:2020, IDT Steels, nickel alloys and cobalt alloys ko en 77.140.80 10.99 investment castings - Visual testing of surface quality BAS/TC 4 prBAS ISO 185:2021 ISO 185:2020, IDT Grey cast irons - Classification ko en 77.080.10 10.99 BAS/TC 4 prBAS ISO 11971:2021 ISO 11971:2020, IDT Steel and iron castings - Visual testing ko en 77.140.80, 10.99 of surface quality 77.040.20 BAS/TC 4 prBAS ISO 4992-1:2021 ISO 4992-1:2020, IDT Steel castings - Ultrasonic testing - Part ko en 77.140.80, 10.99 1: Steel castings for general purposes 77.040.20
BAS/TC 4 prBAS ISO 4992-2:2021 ISO 4992-2:2020, IDT Steel castings - Ultrasonic testing - Part ko en 77.140.80, 10.99 2: Steel castings for highly stressed 77.040.20 components BAS/TC 4 prBAS ISO 10275:2021 ISO 10275:2020, IDT Metallic materials - Sheet and strip - ko en 77.040.10 10.99 Determination of tensile strain hardening exponent
42 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 4 prBAS ISO 4986:2021 ISO 4986:2020, IDT Steel and iron castings - Magnetic ko en 77.140.80, 10.99 particle testing 77.040.20 BAS/TC 4 prBAS ISO 4987:2021 ISO 4987:2020, IDT Steel and iron castings - Liquid ko en 77.140.80, 10.99 penetrant testing 77.040.20 BAS/TC 4 prBAS ISO 16172:2021 ISO 16172:2018, IDT Steel sheet, metallic-coated by the ko en 77.140.50 10.99 continuous hot-dip process for corrugated steel pipe BAS/TC 4 prBAS ISO 17340:2021 ISO 17340:2020, IDT Metallic materials - Ductility testing - ko en 77.040.10 10.99 High speed compression test for porous and cellular metals BAS/TC 4 prBAS ISO 5952:2021 ISO 5952, IDT Steel sheet, hot-rolled, of structural ko en 77.140.50 10.99 quality with improved atmospheric corrosion resistance BAS/TC 4 prBAS ISO 11484:2021 ISO 11484, IDT Steel products - Employer's qualification ko en 77.040.20, 10.99 system for non-destructive testing (NDT) 03.100.30 personnel BAS/TC 4 prBAS ISO 12725:2021 ISO 12725:2019, IDT Nickel and nickel alloy castings ko en 77.150.40 10.99 BAS/TC 5 prBAS EN 300 113-1 V1.4.1:2021 EN 300 113-1 V1.4.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 1: Technical characteristics and methods of measurement BAS/TC 5 prBAS EN 300 113-1 V1.5.1:2021 EN 300 113-1 V1.5.1:2003, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 1: Technical characteristics and methods of measurement
43 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 113-2 V1.2.1:2021 EN 300 113-2 V1.2.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 300 119-2 V2.1.1:2021 EN 300 119-2 V2.1.1:2004, IDT Environmental Engineering (EE); pr en 10.99 European telecommunication standard for equipment practice; Part 2: Engineering requirements for racks and cabinets BAS/TC 5 prBAS EN 300 119-3 V2.1.1:2021 EN 300 119-3 V2.1.1:2004, IDT Environmental Engineering (EE); pr en 10.99 European telecommunication standard for equipment practice; Part 3: Engineering requirements for miscellaneous racks and cabinets BAS/TC 5 prBAS EN 300 132-1 V2.1.1:2021 EN 300 132-1 V2.1.1:2019, IDT Environmental Engineering (EE); Power pr en 10.99 supply interface at the input to Information and Communication Technology (ICT) equipment; Part 1: Alternating Current (AC) BAS/TC 5 prBAS EN 300 132-2 V2.6.1:2021 EN 300 132-2 V2.6.1:2019, IDT Environmental Engineering (EE); Power pr en 10.99 supply interface at the input of Information and Communication Technology (ICT) equipment; Part 2: -48 V Direct Current (DC) BAS/TC 5 prBAS EN 300 162-1 V1.3.1:2021 EN 300 162-1 V1.3.1:2003, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 1: Technical characteristics and methods of measurement
44 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 176-1 V1.5.1:2021 EN 300 176-1 V1.5.1:2003, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Test specification; Part 1: Radio BAS/TC 5 prBAS EN 300 220-1 V1.2.1:2021 EN 300 220-1 V1.2.1:1997, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short range devices; Technical characteristics and test methods for radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Parameters intended for regulatory purposes BAS/TC 5 prBAS EN 300 220-2 V1.2.1:2021 EN 300 220-2 V1.2.1:1997, IDT ElectroMagnetic Compatibility and Radio pr en 10.99 Spectrum Matters (ERM); Short range devices; Technical characteristics and test methods for radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 2: Supplementary parameters not intended for regulatory purposes
BAS/TC 5 prBAS EN 300 220-2 V3.2.1:2021 EN 300 220-2 V3.2.1:2018, IDT Short Range Devices (SRD) operating pr en 10.99 in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard for access to radio spectrum for non specific radio equipment BAS/TC 5 prBAS EN 300 224-2 V1.1.1:2021 EN 300 224-2 V1.1.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
45 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 328 V1.4.1:2021 EN 300 328 V1.4.1:2003, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 300 328 V1.5.1:2021 EN 300 328 V1.5.1:2004, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 300 328-1 V1.2.2:2021 EN 300 328-1 V1.2.2:2000, IDT ElectroMagnetic Compatibility and Radio pr en 10.99 Spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Part 1: Technical characteristics and test conditions
BAS/TC 5 prBAS EN 300 328-2 V1.1.1:2021 EN 300 328-2 V1.1.1:2000, IDT Electromagnetic compatibility and Radio pr en 10.99 Spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive.
46 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 330-1 V1.3.2:2021 EN 300 330-1 V1.3.2:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods BAS/TC 5 prBAS EN 300 338-1 V1.5.1:2021 EN 300 338-1 V1.5.1:2019, IDT Technical characteristics and methods pr en 10.99 of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 1: Common requirements
BAS/TC 5 prBAS EN 300 392-1 V1.2.1:2021 EN 300 392-1 V1.2.1:2003, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Voice plus Data (V+D); Part 1: General network design BAS/TC 5 prBAS EN 300 392-1 V1.3.1:2021 EN 300 392-1 V1.3.1:2005, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Voice plus Data (V+D); Part 1: General network design BAS/TC 5 prBAS EN 300 392-10-11 EN 300 392-10-11 V1.3.1:2004, Terrestrial Trunked Radio (TETRA); pr en 10.99 V1.3.1:2021 IDT Voice plus Data (V+D); Part 10: Supplementary services stage 1; Sub- part 11: Call Waiting (CW) BAS/TC 5 prBAS EN 300 392-10-16 EN 300 392-10-16 V1.2.1:2004, Terrestrial Trunked Radio (TETRA); pr en 10.99 V1.2.1:2021 IDT Voice plus Data (V+D); Part 10: Supplementary services stage 1; Sub- part 16: Pre-emptive Priority Call (PPC)
BAS/TC 5 prBAS EN 300 392-10-18 EN 300 392-10-18 V1.2.1:2002, Terrestrial Trunked Radio (TETRA); pr en 10.99 V1.2.1:2021 IDT Voice plus Data (V+D); Part 10: Supplementary services stage 1; Sub- part 18: Barring of Outgoing Calls (BOC)
47 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 392-11-10 EN 300 392-11-10 V1.1.1:2001, Terrestrial Trunked Radio (TETRA); pr en 10.99 V1.1.1:2021 IDT Voice plus Data (V+D); Part 11: Supplementary services stage 2; Sub- part 10: Priority Call (PC) BAS/TC 5 prBAS EN 300 392-12-10 EN 300 392-12-10 V1.1.1:2001, Terrestrial Trunked Radio (TETRA); pr en 10.99 V1.1.1:2021 IDT Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub- part 10: Priority Call (PC) BAS/TC 5 prBAS EN 300 392-12-12 EN 300 392-12-12 V1.1.1:2001, Terrestrial Trunked Radio (TETRA); pr en 10.99 V1.1.1:2021 IDT Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub- part 12: Call Hold (CH) BAS/TC 5 prBAS EN 300 392-12-21 EN 300 392-12-21 V1.1.1:2003, Terrestrial Trunked Radio (TETRA); pr en 10.99 V1.1.1:2021 IDT Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub- part 21: Ambience Listening (AL) BAS/TC 5 prBAS EN 300 392-12-21 EN 300 392-12-21 V1.2.1:2004, Terrestrial Trunked Radio (TETRA); pr en 10.99 V1.2.1:2021 IDT Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub- part 21: Ambience Listening (AL) BAS/TC 5 prBAS EN 300 392-2 V2.1.1:2021 EN 300 392-2 V2.1.1:2000, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Voice plus Data (V+D); Part 2: Air Interface (AI) BAS/TC 5 prBAS EN 300 392-2 V2.5.2:2021 EN 300 392-2 V2.5.2:2005, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Voice plus Data (V+D); Part 2: Air Interface (AI) BAS/TC 5 prBAS EN 300 392-5 V1.2.1:2021 EN 300 392-5 V1.2.1:2003, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Voice plus Data (V+D); Part 5: Peripheral Equipment Interface (PEI) BAS/TC 5 prBAS EN 300 392-5 V2.5.1:2021 EN 300 392-5 V2.5.1:2016, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Voice plus Data (V+D) and Direct Mode Operation (DMO); Part 5: Peripheral Equipment Interface (PEI) BAS/TC 5 prBAS EN 300 392-7 V2.2.1:2021 EN 300 392-7 V2.2.1:2004, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Voice plus Data (V+D); Part 7: Security
48 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 392-7 V3.5.1:2021 EN 300 392-7 V3.5.1:2019, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Voice plus Data (V+D); Part 7: Security
BAS/TC 5 prBAS EN 300 392-9 V1.3.1:2021 EN 300 392-9 V1.3.1:2004, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Voice plus Data (V+D); Part 9: General requirements for supplementary services BAS/TC 5 prBAS EN 300 394-1 V2.1.2:2021 EN 300 394-1 V2.1.2:2000, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Conformance testing specification; Part 1: Radio BAS/TC 5 prBAS EN 300 396-2 V1.2.1:2021 EN 300 396-2 V1.2.1:2002, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Technical requirements for Direct Mode Operation (DMO); Part 2: Radio aspects
BAS/TC 5 prBAS EN 300 396-3 V1.2.1:2021 EN 300 396-3 V1.2.1:2004, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Technical requirements for Direct Mode Operation (DMO); Part 3: Mobile Station to Mobile Station (MS-MS) Air Interface (AI) protocol BAS/TC 5 prBAS EN 300 396-4 V1.2.1:2021 EN 300 396-4 V1.2.1:2000, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Technical requirements for Direct Mode Operation (DMO); Part 4: Type 1 repeater air interface BAS/TC 5 prBAS EN 300 396-6 V1.6.1:2021 EN 300 396-6 V1.6.1:2016, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Direct Mode Operation (DMO); Part 6: Security BAS/TC 5 prBAS EN 300 433-1 V1.1.2:2021 EN 300 433-1 V1.1.2:2000, IDT ElectroMagnetic Compatibility and Radio pr en 10.99 Spectrum Matters (ERM); Land Mobile Service; Double Side Band (DSB) and/or Single Side Band (SSB) amplitude modulated citizen's band radio equipment; Part 1: Technical characteristics and methods of measurement
49 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 433-2 V1.1.1:2021 EN 300 433-2 V1.1.1:2000, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Land Mobile Service; Double Side Band (DSB) and/or Single Side Band (SSB) amplitude modulated citizen's band radio equipment; Part 2: Harmonized EN covering essential requirements under article 3.2 of R&TTE Directive
BAS/TC 5 prBAS EN 300 440 V2.2.1:2021 EN 300 440 V2.2.1:2018, IDT Short Range Devices (SRD); Radio pr en 10.99 equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard for access to radio spectrum BAS/TC 5 prBAS EN 300 440-2 V1.4.1:2021 EN 300 440-2 V1.4.1:2010, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 300 444 V1.4.1:2021 EN 300 444 V1.4.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Generic Access Profile (GAP) BAS/TC 5 prBAS EN 300 454-2 V1.1.1:2021 EN 300 454-2 V1.1.1:2000, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 300 466 V1.2.1:2021 EN 300 466 V1.2.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM Interworking Profile (IWP); General description of service requirements; Functional capabilities and information flows
50 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 523 V4.10.1:2021 EN 300 523 V4.10.1:2000, IDT European digital cellular pr en 10.99 telecommunications system (Phase 2); Numbering, addressing and identification (GSM 03.03 version 4.10.1) BAS/TC 5 prBAS EN 300 676-1 V1.4.1:2021 EN 300 676-1 V1.4.1:2007, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 1: Technical characteristics and methods of measurement
BAS/TC 5 prBAS EN 300 698-1 V1.3.1:2021 EN 300 698-1 V1.3.1:2003, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Part 1: Technical characteristics and methods of measurement BAS/TC 5 prBAS EN 300 700 V2.1.1:2021 EN 300 700 V2.1.1:2016, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Wireless Relay Station (WRS) BAS/TC 5 prBAS EN 300 718-1 V2.1.1:2021 EN 300 718-1 V2.1.1:2018, IDT Avalanche Beacons operating at 457 pr en 10.99 kHz; Transmitter-receiver systems; Part 1: Harmonised Standard for access to radio spectrum BAS/TC 5 prBAS EN 300 718-2 V1.1.1:2021 EN 300 718-2 V1.1.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
51 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 718-3 V1.2.1:2021 EN 300 718-3 V1.2.1:2004, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive BAS/TC 5 prBAS EN 300 720-1 V1.2.1:2021 EN 300 720-1 V1.2.1:2000, IDT ElectroMagnetic Compatibility and Radio pr en 10.99 Spectrum Matters (ERM); Ultra-High Frequency (UHF) on-board communications systems and equipment; Part 1: Technical characteristics and methods of measurement BAS/TC 5 prBAS EN 300 757 V1.2.1:2021 EN 300 757 V1.2.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Low Rate Messaging Service (LRMS) including Short Messaging Service (SMS)
BAS/TC 5 prBAS EN 300 757 V1.3.1:2021 EN 300 757 V1.3.1:2002, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Low Rate Messaging Service (LRMS) including Short Messaging Service (SMS)
BAS/TC 5 prBAS EN 300 757 V1.4.1:2021 EN 300 757 V1.4.1:2002, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Low Rate Messaging Service (LRMS) including Short Messaging Service (SMS)
BAS/TC 5 prBAS EN 300 765-1 V1.2.1:2021 EN 300 765-1 V1.2.1:2000, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Radio in the Local Loop (RLL) Access Profile (RAP); Part 1: Basic telephony services
52 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 820-1 V1.1.1:2021 EN 300 820-1 V1.1.1:1998, IDT Telecommunications Management pr en 10.99 Network (TMN); Management information model for the X-type interface between Operation Systems (OSs) of a Virtual Path (VP)/Virtual Channel (VC) cross connected network; Part 1: Configuration management aspects BAS/TC 5 prBAS EN 300 820-2 V1.2.3:2021 EN 300 820-2 V1.2.3:1998, IDT Telecommunications Management pr en 10.99 Network (TMN); Asynchronous Transfer Mode (ATM) Management information model for the X-type interface between Operation Systems (OSs) of a Virtual Path (VP)/Virtual Channel (VC) cross connected network; Part 2: VP alarm management
BAS/TC 5 prBAS EN 300 927 V5.3.1:2021 EN 300 927 V5.3.1:2000, IDT Digital cellular telecommunications pr en 10.99 system (Phase 2+) (GSM); Numbering, addressing and identification (GSM 03.03 version 5.3.1 Release 1996)
BAS/TC 5 prBAS EN 300 940 V5.15.1:2021 EN 300 940 V5.15.1:2000, IDT Digital cellular telecommunications pr en 10.99 system (Phase 2+) (GSM); Mobile radio interface; Layer 3 specification (GSM 04.08 version 5.15.1 Release 1996)
BAS/TC 5 prBAS EN 300 940 V5.16.1:2021 EN 300 940 V5.16.1:2000, IDT Digital cellular telecommunications pr en 10.99 system (Phase 2+) (GSM); Mobile radio interface; Layer 3 specification (GSM 04.08 version 5.16.1 Release 1996)
BAS/TC 5 prBAS EN 300 940 V6.9.1:2021 EN 300 940 V6.9.1:2000, IDT Digital cellular telecommunications pr en 10.99 system (Phase 2+) (GSM); Mobile radio interface layer 3 specification (GSM 04.08 version 6.9.1 Release 1997)
53 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 300 940 V7.6.1:2021 EN 300 940 V7.6.1:2000, IDT Digital cellular telecommunications pr en 10.99 system (Phase 2+) (GSM); Mobile radio interface layer 3 specification (GSM 04.08 version 7.6.1 Release 1998)
BAS/TC 5 prBAS EN 301 025-1 V1.2.1:2021 EN 301 025-1 V1.2.1:2004, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class D Digital Selective Calling (DSC); Part 1: Technical characteristics and methods of measurement BAS/TC 5 prBAS EN 301 025-1 V1.3.1:2021 EN 301 025-1 V1.3.1:2007, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class D Digital Selective Calling (DSC); Part 1: Technical characteristics and methods of measurement BAS/TC 5 prBAS EN 301 025-1 V1.5.1:2021 EN 301 025-1 V1.5.1:2011, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class D Digital Selective Calling (DSC); Part 1: Technical characteristics and methods of measurement BAS/TC 5 prBAS EN 301 033 V1.1.1:2021 EN 301 033 V1.1.1:1998, IDT ElectroMagnetic Compatibility and Radio pr en 10.99 Spectrum Matters (ERM); Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands
54 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 033 V1.2.1:2021 EN 301 033 V1.2.1:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands BAS/TC 5 prBAS EN 301 039 V1.1.1:2021 EN 301 039 V1.1.1:1997, IDT Private Integrated Services Network pr en 10.99 (PISN); Mapping functions for the employment of 64 kbit/s circuit mode connections with 16 kbit/s sub- multiplexing BAS/TC 5 prBAS EN 301 040 V2.0.0:2021 EN 301 040 V2.0.0:1999, IDT Terrestrial Trunked Radio (TETRA); pr en 10.99 Security; Lawful Interception (LI) interface BAS/TC 5 prBAS EN 301 082 V1.1.1:2021 EN 301 082 V1.1.1:1998, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Outgoing Call Barring-Fixed (OCB-F) supplementary service; Service description BAS/TC 5 prBAS EN 301 091-1 V1.2.1:2021 EN 301 091-1 V1.2.1:2004, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 1: Technical characteristics and test methods for radar equipment operating in the 76 GHz to 77 GHz range BAS/TC 5 prBAS EN 301 091-2 V1.2.1:2021 EN 301 091-2 V1.2.1:2004, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonised EN covering essential requirements of article 3.2 of the R&TTE Directive
55 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 091-2 V1.2.2:2021 EN 301 091-2 V1.2.2:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonised EN covering essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 301 091-2 V1.3.2:2021 EN 301 091-2 V1.3.2:2006, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 301 098 V1.1.1:2021 EN 301 098 V1.1.1:1998, IDT Telecommunications Management pr en 10.99 Network (TMN); Scheduling function; Support object classes BAS/TC 5 prBAS EN 301 131 V1.1.1:2021 EN 301 131 V1.1.1:1999, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Teleaction teleservice; Service description BAS/TC 5 prBAS EN 301 132 V1.1.1:2021 EN 301 132 V1.1.1:1998, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Security tools (SET) for use within telecommunication services BAS/TC 5 prBAS EN 301 134 V1.1.1:2021 EN 301 134 V1.1.1:1998, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Completion of Calls on No Reply (CCNR) supplementary service; Service description BAS/TC 5 prBAS EN 301 171 V1.1.1:2021 EN 301 171 V1.1.1:1998, IDT Video coding for low bit rate pr en 10.99 communication [ITU-T Recommendation H.263 (1996)] BAS/TC 5 prBAS EN 301 172 V1.1.1:2021 EN 301 172 V1.1.1:1998, IDT Generic coding of moving pictures and pr en 10.99 associated audio information [ITU-T Recommendations H.262 (1995) and H.222.0 (1995)] BAS/TC 5 prBAS EN 301 175 V1.1.1:2021 EN 301 175 V1.1.1:1998, IDT Cordless Terminal Mobility (CTM); pr en 10.99 Phase 1; Service description
56 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 178-1 V1.2.1:2021 EN 301 178-1 V1.2.1:2003, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 1: Technical characteristics and methods of measurement
BAS/TC 5 prBAS EN 301 238 V1.3.1:2021 EN 301 238 V1.3.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services with roaming mobility (service type D, mobility class 2)
BAS/TC 5 prBAS EN 301 271 V1.2.1:2021 EN 301 271 V1.2.1:2001, IDT Telecommunications Management pr en 10.99 Network (TMN); Management interfaces associated with the VB5.1 reference point; BAS/TC 5 prBAS EN 301 273 V1.1.3:2021 EN 301 273 V1.1.3:2000, IDT Cordless Terminal Mobility (CTM); pr en 10.99 Phase 2; Service description BAS/TC 5 prBAS EN 301 344 V6.7.1:2021 EN 301 344 V6.7.1:2000, IDT Digital cellular telecommunications pr en 10.99 system (Phase 2+) (GSM); General Packet Radio Service (GPRS); Service description; Stage 2 (GSM 03.60 version 6.7.1 Release 1997) BAS/TC 5 prBAS EN 301 347 V6.8.1:2021 EN 301 347 V6.8.1:2000, IDT Digital cellular telecommunications pr en 10.99 system (Phase 2+) (GSM); General Packet Radio Service (GPRS); GPRS Tunnelling Protocol (GTP) across the Gn and Gp Interface (GSM 09.60 version 6.8.1 Release 1997)
57 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 357 V1.1.1:2021 EN 301 357 V1.1.1:1999, IDT ElectroMagnetic Compatibility and Radio pr en 10.99 Spectrum Matters (ERM); Technical characteristics and test methods for analogue cordless wideband audio devices using integral antennas operating in the CEPT recommended 863 MHz to 865 MHz frequency range
BAS/TC 5 prBAS EN 301 357-1 V1.1.2:2021 EN 301 357-1 V1.1.2:2000, IDT ElectroMagnetic Compatibility and Radio pr en 10.99 Spectrum Matters (ERM); Analogue cordless wideband audio devices using integral antennas operating in the CEPT recommended 863 MHz to 865 MHz frequency range; Part 1: Technical characteristics and test methods
BAS/TC 5 prBAS EN 301 357-1 V1.2.1:2021 EN 301 357-1 V1.2.1:2001, IDT ElectroMagnetic Compatibility and Radio pr en 10.99 Spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 1: Technical characteristics and test methods
BAS/TC 5 prBAS EN 301 357-1 V1.3.1:2021 EN 301 357-1 V1.3.1:2006, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000 MHz; Part 1: Technical characteristics and test methods BAS/TC 5 prBAS EN 301 357-2 V1.1.1:2021 EN 301 357-2 V1.1.1:2000, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Analogue cordless wideband audio devices using integral antennas operating in the CEPT recommended 863 MHz to 865 MHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
58 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 357-2 V1.4.1:2021 EN 301 357-2 V1.4.1:2008, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 301 363 V1.1.2:2021 EN 301 363 V1.1.2:1999, IDT Universal Personal Telecommunication pr en 10.99 (UPT); UPT phase 2; Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Public Switched Telephone Network (PSTN), Integrated Services Digital Network (ISDN) and Global System for Mobile communications (GSM) terminals (one pass and multiple pass authentication); Conformance test specification
BAS/TC 5 prBAS EN 301 366 V1.1.2:2021 EN 301 366 V1.1.2:1999, IDT Universal Personal Telecommunication pr en 10.99 (UPT); UPT phase 2; Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices (CADs); UPT card accepting Dual Tone Multiple Frequency (DTMF) device; Conformance test specification
BAS/TC 5 prBAS EN 301 384 V1.1.1:2021 EN 301 384 V1.1.1:1999, IDT Telecommunications Management pr en 10.99 Network (TMN); Performance monitoring for Plesynchronous Digital Hierarchy (PDH) interfaces; Information model for the Network Element (NE) view
59 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 401 V1.2.6:2021 EN 301 401 V1.2.6:1999, IDT Attachment requirements for Data pr en 10.99 Terminal Equipment (DTE) to connect to public networks that have physical and electrical network presentations based upon the ITU-T V-series of Recommendations BAS/TC 5 prBAS EN 301 437 V1.1.1:2021 EN 301 437 V1.1.1:1999, IDT Terminal Equipment (TE); Attachment pr en 10.99 requirements for pan-European approval for connection to the analogue Public Switched Telephone Networks (PSTNs) of TE supporting the voice telephony service in which network addressing, if provided, is by means of Dual Tone Multi Frequency (DTMF) signalling BAS/TC 5 prBAS EN 301 489-1 V2.2.3:2021 EN 301 489-1 V2.2.3:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility BAS/TC 5 prBAS EN 301 489-10 EN 301 489-10 V1.2.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.2.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment BAS/TC 5 prBAS EN 301 489-11 EN 301 489-11 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 11: Specific conditions for analogue terrestrial sound broadcasting (Amplitude Modulation (AM) and Frequency Modulation (FM)) service transmitters
60 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 489-12 EN 301 489-12 V3.1.1:2019, IDT Electromagnetic compatibility and Radio pr en 10.99 V3.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) Harmonised Standard for electromagnetic compatibility
BAS/TC 5 prBAS EN 301 489-14 EN 301 489-14 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 14: Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters BAS/TC 5 prBAS EN 301 489-15 EN 301 489-15 V2.1.1:2016, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.1.1:2021 standard for radio equipment and services; Part 15: Specific conditions for commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-15 EN 301 489-15 V2.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.2.1:2021 standard for radio equipment and services; Part 15: Specific conditions for commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
61 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 489-16 EN 301 489-16 V1.1.1:2000, IDT ElectroMagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 16: Specific conditions for analogue cellular radio communications equipment, mobile and portable
BAS/TC 5 prBAS EN 301 489-17 EN 301 489-17 V1.1.1:2000, IDT ElectroMagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Wideband data and HIPERLAN equipment BAS/TC 5 prBAS EN 301 489-18 EN 301 489-18 V1.1.1:2000, IDT ElectroMagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment BAS/TC 5 prBAS EN 301 489-18 EN 301 489-18 V1.2.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.2.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment BAS/TC 5 prBAS EN 301 489-19 EN 301 489-19 V1.1.1:2000, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications
62 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 489-19 EN 301 489-19 V2.1.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.1.1:2021 standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-2 V2.1.1:2021 EN 301 489-2 V2.1.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for radio equipment and services; Part 2: Specific conditions for radio paging equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-20 EN 301 489-20 V1.1.1:2000, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)
BAS/TC 5 prBAS EN 301 489-20 EN 301 489-20 V2.1.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.1.1:2021 standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS); Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
63 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 489-22 EN 301 489-22 V1.1.1:2000, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment BAS/TC 5 prBAS EN 301 489-23 EN 301 489-23 V1.1.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) Base Station (BS) radio, repeater and ancillary equipment BAS/TC 5 prBAS EN 301 489-24 EN 301 489-24 V1.1.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment BAS/TC 5 prBAS EN 301 489-26 EN 301 489-26 V1.1.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 26: Specific conditions for IMT-2000 CDMA Multi-carrier Base Stations and ancillary equipment
64 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 489-27 EN 301 489-27 V2.1.1:2016, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.1.1:2021 standard for radio equipment and services; Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P); Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-27 EN 301 489-27 V2.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.2.1:2021 standard for radio equipment and services; Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) operating in the 402 MHz to 405 MHz bands; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-29 EN 301 489-29 V2.1.1:2016, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.1.1:2021 standard for radio equipment and services; Part 29: Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-29 EN 301 489-29 V2.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.2.1:2021 standard for radio equipment and services; Part 29: Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
65 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 489-3 V1.3.1:2021 EN 301 489-3 V1.3.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz BAS/TC 5 prBAS EN 301 489-3 V2.1.1:2021 EN 301 489-3 V2.1.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
BAS/TC 5 prBAS EN 301 489-31 EN 301 489-31 V2.1.1:2016, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.1.1:2021 standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P); Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-31 EN 301 489-31 V2.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.2.1:2021 standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P); Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
66 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 489-33 EN 301 489-33 V2.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.2.1:2021 standard for radio equipment and services; Part 33: Specific conditions for Ultra-WideBand (UWB) devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-34 EN 301 489-34 V2.1.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.1.1:2021 standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones; Harmonised Standard covering the essential requirements of article 6 of Directive 2014/30/EU BAS/TC 5 prBAS EN 301 489-35 EN 301 489-35 V2.1.1:2016, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.1.1:2021 standard for radio equipment and services; Part 35: Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 483,5 MHz to 2 500 MHz bands; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-35 EN 301 489-35 V2.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.2.1:2021 standard for radio equipment and services; Part 35: Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 483,5 MHz to 2 500 MHz bands; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
67 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 489-4 V3.2.1:2021 EN 301 489-4 V3.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
BAS/TC 5 prBAS EN 301 489-5 V2.1.1:2021 EN 301 489-5 V2.1.1:2016, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non- speech) and Terrestrial Trunked Radio (TETRA) Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-5 V2.2.1:2021 EN 301 489-5 V2.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non- speech) and Terrestrial Trunked Radio (TETRA); Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-50 EN 301 489-50 V2.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.2.1:2021 standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
68 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 489-51 EN 301 489-51 V1.1.1:2016, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V1.1.1:2021 standard for radio equipment and services; Part 51: Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using 24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz; Harmonised Standard covering the essential requirements of article 3.1b of Directive 2014/53/EU
BAS/TC 5 prBAS EN 301 489-51 EN 301 489-51 V2.1.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V2.1.1:2021 standard for radio equipment and services; Part 51: Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using 24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
BAS/TC 5 prBAS EN 301 489-53 EN 301 489-53 V1.1.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 V1.1.1:2021 standard for radio equipment and services; Part 53: Specific conditions for terrestrial sound broadcasting and digital TV broadcasting service transmitters and associated ancillary equipment; Harmonised standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
69 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 489-6 V2.1.1:2021 EN 301 489-6 V2.1.1:2016, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-6 V2.2.1:2021 EN 301 489-6 V2.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU BAS/TC 5 prBAS EN 301 489-9 V1.2.1:2021 EN 301 489-9 V1.2.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices BAS/TC 5 prBAS EN 301 489-9 V2.1.1:2021 EN 301 489-9 V2.1.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
BAS/TC 5 prBAS EN 301 549 V3.1.1:2021 EN 301 549 V3.1.1:2019, IDT Accessibility requirements for ICT pr en 10.99 products and services
70 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 649 V1.2.1:2021 EN 301 649 V1.2.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); DECT Packet Radio Service (DPRS) BAS/TC 5 prBAS EN 301 649 V1.3.1:2021 EN 301 649 V1.3.1:2003, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); DECT Packet Radio Service (DPRS) BAS/TC 5 prBAS EN 301 783-1 V1.1.1:2021 EN 301 783-1 V1.1.1:2000, IDT ElectroMagnetic Compatibility and Radio pr en 10.99 Spectrum Matters (ERM); Land Mobile Service; Commercially available amateur radio equipment; Part 1: Technical characteristics and methods of measurement BAS/TC 5 prBAS EN 301 839-1 V1.1.1:2021 EN 301 839-1 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 1: Technical characteristics, including electromagnetic compatibility requirements, and test methods BAS/TC 5 prBAS EN 301 841-1 V1.1.1:2021 EN 301 841-1 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 1: Physical layer BAS/TC 5 prBAS EN 301 841-1 V1.2.1:2021 EN 301 841-1 V1.2.1:2003, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 1: Physical layer and MAC sub-layer
71 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 841-2 V1.2.1:2021 EN 301 841-2 V1.2.1:2019, IDT VHF air-ground Digital Link (VDL) Mode pr en 10.99 2; Technical characteristics and methods of measurement for ground- based equipment; Part 2: Upper layers BAS/TC 5 prBAS EN 301 842-1 V1.1.1:2021 EN 301 842-1 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground Data Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 1: General description and physical layer
BAS/TC 5 prBAS EN 301 842-1 V1.2.1:2021 EN 301 842-1 V1.2.1:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 1: EN for ground equipment
BAS/TC 5 prBAS EN 301 842-1 V1.3.3:2021 EN 301 842-1 V1.3.3:2011, IDT VHF air-ground Digital Link (VDL) Mode pr en 10.99 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 1: EN for ground equipment BAS/TC 5 prBAS EN 301 842-2 V1.1.1:2021 EN 301 842-2 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground Data Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 2: Data link layer
72 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 842-2 V1.2.1:2021 EN 301 842-2 V1.2.1:2003, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground Data Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 2: Data link layer BAS/TC 5 prBAS EN 301 842-2 V1.3.1:2021 EN 301 842-2 V1.3.1:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground Data Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 2: Data link layer BAS/TC 5 prBAS EN 301 842-2 V1.6.1:2021 EN 301 842-2 V1.6.1:2011, IDT VHF air-ground Digital Link (VDL) Mode pr en 10.99 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 2: General description and data link layer BAS/TC 5 prBAS EN 301 842-3 V1.3.1:2021 EN 301 842-3 V1.3.1:2011, IDT VHF air-ground Digital Link (VDL) Mode pr en 10.99 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Additional broadcast aspects BAS/TC 5 prBAS EN 301 843-1 V1.1.1:2021 EN 301 843-1 V1.1.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 1: Common technical requirements
73 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 843-2 V1.1.1:2021 EN 301 843-2 V1.1.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for radiotelephone transmitters and receivers BAS/TC 5 prBAS EN 301 843-4 V1.1.1:2021 EN 301 843-4 V1.1.1:2001, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 4: Specific conditions for Narrow-Band Direct-Printing (NBDP) NAVTEX receivers BAS/TC 5 prBAS EN 301 908-1 V1.1.1:2021 EN 301 908-1 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 301 908-10 EN 301 908-10 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 V1.1.1:2021 spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks; Part 10: Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 301 908-13 EN 301 908-13 V13.1.1:2019, IMT cellular networks; Harmonised pr en 10.99 V13.1.1:2021 IDT Standard for access to radio spectrum; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)
74 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 908-15 EN 301 908-15 V15.1.1:2020, IMT cellular networks; Harmonised pr en 10.99 V15.1.1:2021 IDT Standard for access to radio spectrum; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters BAS/TC 5 prBAS EN 301 908-18 EN 301 908-18 V13.1.1:2019, IMT cellular networks; Harmonised pr en 10.99 V13.1.1:2021 IDT Standard for access to radio spectrum; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) BAS/TC 5 prBAS EN 301 908-2 V1.1.1:2021 EN 301 908-2 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 301 908-3 V1.1.1:2021 EN 301 908-3 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks; Part 3: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 301 908-4 V1.1.1:2021 EN 301 908-4 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks; Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
75 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 908-5 V1.1.1:2021 EN 301 908-5 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks; Part 5: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS) covering essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 301 908-6 V1.1.1:2021 EN 301 908-6 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks; Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 301 908-7 V1.1.1:2021 EN 301 908-7 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 301 925 V1.1.1:2021 EN 301 925 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement
76 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 301 929-1 V1.1.1:2021 EN 301 929-1 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Part 1: Technical characteristics and methods of measurement
BAS/TC 5 prBAS EN 302 018-1 V1.1.1:2021 EN 302 018-1 V1.1.1:2002, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 1: Technical characteristics and test methods BAS/TC 5 prBAS EN 302 018-2 V1.2.1:2021 EN 302 018-2 V1.2.1:2006, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 302 064-2 V1.1.1:2021 EN 302 064-2 V1.1.1:2004, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 302 066-1 V1.1.1:2021 EN 302 066-1 V1.1.1:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices (SRD); Ground- and Wall- Probing Radar applications; Part 1: Technical characteristics and test methods
77 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 302 066-2 V1.2.1:2021 EN 302 066-2 V1.2.1:2008, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 302 077 V2.1.1:2021 EN 302 077 V2.1.1:2018, IDT Transmitting equipment for the Digital pr en 10.99 Audio Broadcasting (DAB) service; Harmonised Standard for access to radio spectrum BAS/TC 5 prBAS EN 302 077-2 V1.1.1:2021 EN 302 077-2 V1.1.1:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Transmitting equipment for the Terrestrial - Digital Audio Broadcasting (T-DAB) service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 302 194-2 V1.1.2:2021 EN 302 194-2 V1.1.2:2007, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 302 208-1 V1.1.2:2021 EN 302 208-1 V1.1.2:2006, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods of measurement
BAS/TC 5 prBAS EN 302 245 V2.1.1:2021 EN 302 245 V2.1.1:2018, IDT Transmitting equipment for the Digital pr en 10.99 Radio Mondiale (DRM) sound broadcasting service; Harmonised Standard for access to radio spectrum
78 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 302 245-2 V1.1.1:2021 EN 302 245-2 V1.1.1:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting service Part 2: Harmonized EN under article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 302 264-2 V1.1.1:2021 EN 302 264-2 V1.1.1:2009, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 302 288-1 V1.2.1:2021 EN 302 288-1 V1.2.1:2006, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 1: Technical requirements and methods of measurement
BAS/TC 5 prBAS EN 302 288-1 V1.4.1:2021 EN 302 288-1 V1.4.1:2009, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 1: Technical requirements and methods of measurement
79 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 302 288-2 V1.6.1:2021 EN 302 288-2 V1.6.1:2012, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 302 296-2 V1.2.1:2021 EN 302 296-2 V1.2.1:2011, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 302 500-1 V1.1.1:2021 EN 302 500-1 V1.1.1:2007, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 1: Technical characteristics and test methods BAS/TC 5 prBAS EN 302 510-2 V1.1.1:2021 EN 302 510-2 V1.1.1:2007, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Radio equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power Active Medical Membrane Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
80 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 302 536-2 V1.1.1:2021 EN 302 536-2 V1.1.1:2007, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 302 608 V1.1.1:2021 EN 302 608 V1.1.1:2008, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment for Eurobalise railway systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 302 636-4-1 EN 302 636-4-1 V1.4.1:2020, IDT Intelligent Transport Systems (ITS); pr en 10.99 V1.4.1:2021 Vehicular Communications; GeoNetworking; Part 4: Geographical addressing and forwarding for point-to- point and point-to-multipoint communications; Sub-part 1: Media- Independent Functionality BAS/TC 5 prBAS EN 302 636-5-1 EN 302 636-5-1 V2.2.1:2019, IDT Intelligent Transport Systems (ITS); pr en 10.99 V2.2.1:2021 Vehicular Communications; GeoNetworking; Part 5: Transport Protocols; Sub-part 1: Basic Transport Protocol BAS/TC 5 prBAS EN 302 637-2 V1.4.1:2021 EN 302 637-2 V1.4.1:2019, IDT Intelligent Transport Systems (ITS); pr en 10.99 Vehicular Communications; Basic Set of Applications; Part 2: Specification of Cooperative Awareness Basic Service BAS/TC 5 prBAS EN 302 637-3 V1.3.1:2021 EN 302 637-3 V1.3.1:2019, IDT Intelligent Transport Systems (ITS); pr en 10.99 Vehicular Communications; Basic Set of Applications; Part 3: Specifications of Decentralized Environmental Notification Basic Service
81 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 302 663 V1.3.1:2021 EN 302 663 V1.3.1:2020, IDT Intelligent Transport Systems (ITS); ITS- pr en 10.99 G5 Access layer specification for Intelligent Transport Systems operating in the 5 GHz frequency band BAS/TC 5 prBAS EN 302 686 V1.1.1:2021 EN 302 686 V1.1.1:2011, IDT Intelligent Transport Systems (ITS); pr en 10.99 Radiocommunications equipment operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive BAS/TC 5 prBAS EN 302 752 V1.1.1:2021 EN 302 752 V1.1.1:2009, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Active radar target enhancers; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 302 842-1 V1.1.1:2021 EN 302 842-1 V1.1.1:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground and air-air Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment; Part 1: Physical layer BAS/TC 5 prBAS EN 302 842-1 V1.2.3:2021 EN 302 842-1 V1.2.3:2011, IDT VHF air-ground and air-air Digital Link pr en 10.99 (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment; Part 1: Physical layer
82 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 302 842-2 V1.1.1:2021 EN 302 842-2 V1.1.1:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground and air-air Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment; Part 2: General description and data link layer
BAS/TC 5 prBAS EN 302 842-2 V1.3.1:2021 EN 302 842-2 V1.3.1:2011, IDT VHF air-ground and air-air Digital Link pr en 10.99 (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment; Part 2: General description and data link layer BAS/TC 5 prBAS EN 302 842-3 V1.1.1:2021 EN 302 842-3 V1.1.1:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground and air-air Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment; Part 3: Additional broadcast aspects BAS/TC 5 prBAS EN 302 842-3 V1.3.1:2021 EN 302 842-3 V1.3.1:2011, IDT VHF air-ground and air-air Digital Link pr en 10.99 (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment; Part 3: Additional broadcast aspects
BAS/TC 5 prBAS EN 302 842-4 V1.1.1:2021 EN 302 842-4 V1.1.1:2005, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); VHF air- ground and air-air Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment; Part 4: Point-to- point functions
83 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 302 858 V2.1.1:2021 EN 302 858 V2.1.1:2016, IDT Short Range Devices; Transport and pr en 10.99 Traffic Telematics (TTT); Radar equipment operating in the 24,05 GHz to 24,25 GHz or 24,05 GHz to 24,50 GHz range; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU BAS/TC 5 prBAS EN 302 858-2 V1.3.1:2021 EN 302 858-2 V1.3.1:2013, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Automotive radar equipment operating in the 24,05 GHz up to 24,25 GHz or 24,50 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 302 885-1 V1.1.1:2021 EN 302 885-1 V1.1.1:2011, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 1: Technical characteristics and methods of measurement
BAS/TC 5 prBAS EN 302 890-1 V1.2.1:2021 EN 302 890-1 V1.2.1:2019, IDT Intelligent Transport Systems (ITS); pr en 10.99 Facilities layer function; Part 1: Services Announcement (SA) specification
BAS/TC 5 prBAS EN 303 213-1 V1.1.1:2021 EN 303 213-1 V1.1.1:2009, IDT Advanced Surface Movement Guidance pr en 10.99 and Control System (A-SMGCS); Part 1: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 1 including external interfaces
84 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 303 213-1 V1.4.1:2021 EN 303 213-1 V1.4.1:2016, IDT Advanced Surface Movement Guidance pr en 10.99 and Control System (A-SMGCS); Part 1: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 1 including external interfaces BAS/TC 5 prBAS EN 303 213-2 V1.2.1:2021 EN 303 213-2 V1.2.1:2012, IDT Advanced Surface Movement Guidance pr en 10.99 and Control System (A-SMGCS); Part 2: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 2 including external interfaces BAS/TC 5 prBAS EN 303 213-2 V1.4.1:2021 EN 303 213-2 V1.4.1:2016, IDT Advanced Surface Movement Guidance pr en 10.99 and Control System (A-SMGCS); Part 2: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 2 including external interfaces
BAS/TC 5 prBAS EN 303 213-6-1 EN 303 213-6-1 V3.1.1:2019, IDT Advanced Surface Movement Guidance pr en 10.99 V3.1.1:2021 and Control System (A-SMGCS); Part 6: Harmonised Standard for access to radio spectrum for deployed surface movement radar sensors; Sub-part 1: X- band sensors using pulsed signals and transmitting power up to 100 kW
BAS/TC 5 prBAS EN 303 345-1 V1.1.1:2021 EN 303 345-1 V1.1.1:2019, IDT Broadcast Sound Receivers; Part 1: pr en 10.99 Generic requirements and measuring methods
85 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 303 364-3 V1.1.1:2021 EN 303 364-3 V1.1.1:2019, IDT Primary Surveillance Radar (PSR); pr en 10.99 Harmonised Standard for access to radio spectrum; Part 3: Air Traffic Control (ATC) PSR sensors operating in the frequency band 8 500 MHz to 10 000 MHz (X band) BAS/TC 5 prBAS EN 303 396 V1.1.1:2021 EN 303 396 V1.1.1:2016, IDT Short Range Devices; Measurement pr en 10.99 Techniques for Automotive and Surveillance Radar Equipment BAS/TC 5 prBAS EN 303 423 V1.2.1:2021 EN 303 423 V1.2.1:2018, IDT Environmental Engineering (EE); pr en 10.99 Electrical and electronic household and office equipment; Measurement of networked standby power consumption of Interconnecting equipment; Harmonised Standard covering the measurement method for EC Regulation 1275/2008 amended by EU Regulation 801/2013 BAS/TC 5 prBAS EN 303 446-1 V1.2.1:2021 EN 303 446-1 V1.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for combined and/or integrated radio and non-radio equipment; Part 1: Requirements for equipment intended to be used in residential, commercial and light industry locations
BAS/TC 5 prBAS EN 303 446-2 V1.2.1:2021 EN 303 446-2 V1.2.1:2019, IDT ElectroMagnetic Compatibility (EMC) pr en 10.99 standard for combined and/or integrated radio and non-radio equipment; Part 2: Requirements for equipment intended to be used in industrial locations
BAS/TC 5 prBAS EN 303 454 V1.1.1:2021 EN 303 454 V1.1.1:2018, IDT Short Range Devices (SRD); Metal and pr en 10.99 object detection sensors in the frequency range 1 kHz to 148,5 kHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
86 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 5 prBAS EN 303 470 V1.1.1:2021 EN 303 470 V1.1.1:2019, IDT Environmental Engineering (EE); Energy pr en 10.99 Efficiency measurement methodology and metrics for servers BAS/TC 5 prBAS EN 303 471 V1.1.1:2021 EN 303 471 V1.1.1:2019, IDT Environmental Engineering (EE); Energy pr en 10.99 Efficiency measurement methodology and metrics for Network Function Virtualisation (NFV) BAS/TC 5 prBAS EN 303 472 V1.1.1:2021 EN 303 472 V1.1.1:2018, IDT Environmental Engineering (EE); Energy pr en 10.99 Efficiency measurement methodology and metrics for RAN equipment
BAS/TC 5 prBAS EN 303 613 V1.1.1:2021 EN 303 613 V1.1.1:2020, IDT Intelligent Transport Systems (ITS); LTE- pr en 10.99 V2X Access layer specification for Intelligent Transport Systems operating in the 5 GHz frequency band BAS/TC 5 prBAS EN 305 550-2 V1.2.1:2021 EN 305 550-2 V1.2.1:2014, IDT Electromagnetic compatibility and Radio pr en 10.99 spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
BAS/TC 5 prBAS EN 319 532-3 V1.2.1:2021 EN 319 532-3 V1.2.1:2019, IDT Electronic Signatures and pr en 10.99 Infrastructures (ESI); Registered Electronic Mail (REM) Services; Part 3: Formats BAS/TC 6 prBAS EN 50104:2021 EN 50104:2019, IDT Electrical equipment for the detection pr en 13.320 10.99 and measurement of oxygen - Performance requirements and test methods BAS/TC 6 prBAS EN IEC 60079- EN IEC 60079-0:2018/AC:2020- Explosive atmospheres - Part 0: pr en 29.260.20 10.99 0/Cor1:2021 02, IDT; IEC 60079- Equipment - General requirements 0:2017/COR1:2020, IDT BAS/TC 6 prBAS EN IEC 60079-19:2021 EN IEC 60079-19:2019, IDT; IEC Explosive atmospheres - Part 19: pr en 29.260.20 10.99 60079-19:2019, IDT Equipment repair, overhaul and reclamation
87 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 6 prBAS EN IEC 60695-1-12:2021 EN IEC 60695-1-12:2020, IDT; Fire hazard testing - Part 1-12: pr en 29.020, 10.99 IEC 60695-1-12:2015, IDT Guidance for assessing the fire hazard 13.220.40 of electrotechnical products - Fire safety engineering BAS/TC 6 prBAS EN ISO 80079- EN ISO 80079-36:2016/AC:2019, Explosive atmospheres - Part 36: Non- pr en 29.260.20 10.99 36/Cor1:2021 IDT; ISO 80079-36:2016/Cor electrical equipment for explosive 1:2019, IDT atmospheres - Basic method and requirements - Technical Corrigendum 1 BAS/TC 6 prBAS EN ISO/IEC 80079- EN ISO/IEC 80079-34:2020, IDT; Explosive atmospheres - Part 34: pr en 29.260.20 10.99 34:2021 ISO/IEC 80079-34:2018, IDT; Application of quality management ISO/IEC 80079-34:2018, IDT systems for Ex Product manufacture
BAS/TC 6 psBAS EN 14460:2020 EN 14460:2018, IDT Explosion resistant equipment pv bs 29.260.20, 50.99 13.230 BAS/TC 7 prBAS ISO 17091:2021 ISO 17091:2013, IDT Workplace air - Determination of lithium ko en 13.040.30 10.99 hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide - Method by measurement of corresponding cations by suppressed ion chromatography BAS/TC 7 prBAS ISO 16258-1:2021 ISO 16258-1:2015, IDT Workplace air - Analysis of respirable ko en 13.040.30 10.99 crystalline silica by X-ray diffraction - Part 1: Direct-on-filter method BAS/TC 7 prBAS ISO 16258-2:2021 ISO 16258-2:2015, IDT Workplace air - Analysis of respirable ko en 13.040.30 10.99 crystalline silica by X-ray diffraction - Part 2: Method by indirect analysis BAS/TC 7 prBAS ISO 16000-36:2021 ISO 16000-36:2018, IDT Indoor air - Part 36: Standard method ko en 13.040.20 10.99 for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber BAS/TC 7 prBAS ISO 16000-37:2021 ISO 16000-37:2019, IDT Indoor air - Part 37: Measurement of ko en 13.040.20 10.99 PM2,5 mass concentration BAS/TC 7 prBAS ISO 16000-38:2021 ISO 16000-38:2019, IDT Indoor air - Part 38: Determination of ko en 13.040.20 10.99 amines in indoor and test chamber air - Active sampling on samplers containing phosphoric acid impregnated filters
88 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 7 prBAS ISO 16000-39:2021 ISO 16000-39:2019, IDT Indoor air - Part 39: Determination of ko en 13.040.20 10.99 amines - Analysis of amines by (ultra-) high-performance liquid chromatography coupled to high resolution or tandem mass spectrometry
BAS/TC 7 prBAS ISO 16000-40:2021 ISO 16000-40:2019, IDT Indoor air - Part 40: Indoor air quality ko en 13.040.20 10.99 management system BAS/TC 7 prBAS ISO 16000-23:2021 ISO 16000-23:2018, IDT Indoor air - Part 23: Performance test for ko en 13.040.20 10.99 evaluating the reduction of formaldehyde and other carbonyl compounds concentrations by sorptive building materials BAS/TC 7 prBAS ISO 16000-24:2021 ISO 16000-24:2018, IDT Indoor air - Part 24: Performance test for ko en 13.040.20 10.99 evaluating the reduction of volatile organic compound concentrations by sorptive building materials BAS/TC 7 prBAS ISO 14385-1:2021 ISO 14385-1:2014, IDT Stationary source emissions - ko en 13.040.40 10.99 Greenhouse gases - Part 1: Calibration of automated measuring systems
BAS/TC 7 prBAS ISO 14385-2:2021 ISO 14385-2:2014, IDT Stationary source emissions - ko en 13.040.40 10.99 Greenhouse gases - Part 2: Ongoing quality control of automated measuring systems BAS/TC 7 prBAS ISO 14382:2021 ISO 14382:2012, IDT Workplace atmospheres - ko en 13.040.30 10.99 Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperazine- coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors BAS/TC 7 prBAS ISO 13271:2021 ISO 13271:2012, IDT Stationary source emissions - ko en 13.040.40 10.99 Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
89 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 7 prBAS ISO 12219-1:2021 ISO 12219-1:2012, IDT Interior air of road vehicles - Part 1: ko en 13.040.20, 10.99 Whole vehicle test chamber - 43.020 Specification and method for the determination of volatile organic compounds in cabin interiors BAS/TC 7 prBAS ISO 12219-2:2021 ISO 12219-2:2012, IDT Interior air of road vehicles - Part 2: ko en 13.040.20, 10.99 Screening method for the determination 43.020 of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method
BAS/TC 7 prBAS ISO 12219-3:2021 ISO 12219-3:2012, IDT Interior air of road vehicles - Part 3: ko en 13.040.20, 10.99 Screening method for the determination 43.020 of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method BAS/TC 7 prBAS ISO 12219-4:2021 ISO 12219-4:2013, IDT Interior air of road vehicles - Part 4: ko en 13.040.20, 10.99 Method for the determination of the 43.020 emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method BAS/TC 7 prBAS ISO 12219-5:2021 ISO 12219-5:2014, IDT Interior air of road vehicles - Part 5: ko en 13.040.20, 10.99 Screening method for the determination 43.020 of the emissions of volatile organic compounds from vehicle interior parts and materials - Static chamber method
BAS/TC 7 prBAS ISO 12219-6:2021 ISO 12219-6:2017, IDT Interior air of road vehicles - Part 6: ko en 13.040.20, 10.99 Method for the determination of the 43.020 emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature - Small chamber method
90 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 7 prBAS ISO 12219-7:2021 ISO 12219-7:2017, IDT Interior air of road vehicles - Part 7: ko en 13.040.20, 10.99 Odour determination in interior air of 43.020 road vehicles and test chamber air of trim components by olfactory measurements BAS/TC 7 prBAS ISO 12219-8:2021 ISO 12219-8:2018, IDT Interior air of road vehicles - Part 8: ko en 13.040.20, 10.99 Handling and packaging of materials 43.020 and components for emission testing BAS/TC 7 prBAS ISO 12219-9:2021 ISO 12219-9:2019, IDT Interior air of road vehicles - Part 9: ko en 13.040.20, 10.99 Determination of the emissions of 43.020 volatile organic compounds from vehicle interior parts - Large bag method
BAS/TC 7 prBAS ISO/TS 19620:2021 ISO/TS 19620:2018, IDT Water quality - Determination of ko en 13.060.50 10.99 arsenic(III) and arsenic(V) species - Method using high performance liquid chromatography (HPLC) with detection by inductively coupled plasma mass spectrometry (ICP-MS) or hydride generation atomic fluorescence spectrometry (HG-AFS) BAS/TC 7 prBAS ISO 20595:2021 ISO 20595:2018, IDT Water quality - Determination of ko en 13.060.50 10.99 selected highly volatile organic compounds in water - Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC- MS) BAS/TC 7 prBAS ISO/TS 20612:2021 ISO/TS 20612:2007, IDT Water quality - Interlaboratory ko en 13.060.45 10.99 comparisons for proficiency testing of analytical chemistry laboratories BAS/TC 7 prBAS EN 17346:2021 EN 17346:2020, IDT Ambient air - Standard method for the pr en 13.040.20 10.99 determination of the concentration of ammonia using diffusive samplers BAS/TC 7 prBAS EN 17277:2021 EN 17277:2019, IDT Hydrometry - Measurement pr en 07.060 10.99 requirements and classification of rainfall intensity measuring instruments
91 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 7 prBAS EN ISO 11274:2021 EN ISO 11274:2019, IDT; ISO Soil quality - Determination of the water- pr en 13.080.40 10.99 11274:2019, IDT retention characteristic - Laboratory methods BAS/TC 7 prBAS EN ISO 21268-1:2021 EN ISO 21268-1:2019, IDT; ISO Soil quality - Leaching procedures for pr en 13.080.05 10.99 21268-1:2019, IDT subsequent chemical and ecotoxicological testing of soil and soil- like materials - Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter
BAS/TC 7 prBAS EN ISO 21268-2:2021 EN ISO 21268-2:2019, IDT; ISO Soil quality - Leaching procedures for pr en 13.080.05 10.99 21268-2:2019, IDT subsequent chemical and ecotoxicological testing of soil and soil- like material - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter
BAS/TC 7 prBAS EN ISO 21268-3:2021 EN ISO 21268-3:2019, IDT; ISO Soil quality - Leaching procedures for pr en 13.080.05 10.99 21268-3:2019, IDT subsequent chemical and ecotoxicological testing of soil and soil- like materials - Part 3: Up-flow percolation test BAS/TC 7 prBAS EN ISO 21268-4:2021 EN ISO 21268-4:2019, IDT; ISO Soil quality - Leaching procedures for pr en 13.080.05 10.99 21268-4:2019, IDT subsequent chemical and ecotoxicological testing of soil and soil- like materials - Part 4: Influence of pH on leaching with initial acid/base addition BAS/TC 7 prBAS EN ISO 14644-3:2021 EN ISO 14644-3:2019, IDT; ISO Cleanrooms and associated controlled pr en 13.040.35 10.99 14644-3:2019, IDT environments - Part 3: Test methods BAS/TC 7 prBAS EN 17141:2021 EN 17141:2020, IDT Cleanrooms and associated controlled pr en 13.040.35 10.99 environments - Biocontamination control
BAS/TC 7 prBAS EN ISO 25177:2021 EN ISO 25177:2019, IDT; ISO Soil quality - Field soil description pr en 13.080.01 10.99 25177:2019, IDT BAS/TC 7 prBAS EN 17389:2021 EN 17389:2020, IDT Stationary source emissions - Quality pr en 13.040.40 10.99 assurance and quality control procedures for automated dust arrestment plant monitors
92 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 7 prBAS EN 840-1:2021 EN 840-1:2020, IDT Mobile waste and recycling containers - pr en 13.030.40 10.99 Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design BAS/TC 7 prBAS EN 840-2:2021 EN 840-2:2020, IDT Mobile waste and recycling containers - pr en 13.030.40 10.99 Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design BAS/TC 7 prBAS EN 840-3:2021 EN 840-3:2020, IDT Mobile waste and recycling containers - pr en 13.030.40 10.99 Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design BAS/TC 7 prBAS EN 840-4:2021 EN 840-4:2020, IDT Mobile waste and recycling containers - pr en 13.030.40 10.99 Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
BAS/TC 7 prBAS EN 840-5:2021 EN 840-5:2020, IDT Mobile waste and recycling containers - pr en 13.030.40 10.99 Part 5: Performance requirements and test methods BAS/TC 7 prBAS EN 840-6:2021 EN 840-6:2020, IDT Mobile waste and recycling containers - pr en 13.030.40 10.99 Part 6: Safety and health requirements
BAS/TC 7 prBAS EN ISO 21253-2:2021 EN ISO 21253-2:2019, IDT; ISO Water quality - Multi-compound class pr en 13.060.50 10.99 21253-2:2019, IDT methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method BAS/TC 7 prBAS EN ISO 21253-1:2021 EN ISO 21253-1:2019, IDT; ISO Water quality - Multi-compound class pr en 13.060.50 10.99 21253-1:2019, IDT methods - Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry
93 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 7 prBAS EN 15096:2021 EN 15096:2020, IDT Devices to prevent pollution by backflow pr en 23.060.01, 10.99 of potable water - Hose Union anti- 13.060.20 vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification BAS/TC 7 prBAS EN 14451:2021 EN 14451:2020, IDT Devices to prevent pollution by backflow pr en 23.060.50, 10.99 of potable water - In-line anti-vacuum 13.060.20 valves DN 10 to DN 50 inclusive - Family D, type A BAS/TC 7 prBAS EN ISO 14006:2021 EN ISO 14006:2020, IDT; ISO Environmental management systems - pr en 03.100.70, 10.99 14006:2020, IDT Guidelines for incorporating ecodesign 13.020.10 BAS/TC 7 prBAS EN ISO 28258/A1:2021 EN ISO 28258:2013/A1:2019, Soil quality - Digital exchange of soil- pr en 13.080.01, 10.99 IDT; ISO 28258:2013/Amd related data - Amendment 1 11.080.01 1:2019, IDT BAS/TC 7 prBAS EN ISO 23611-3:2021 EN ISO 23611-3:2019, IDT; ISO Soil quality - Sampling of soil pr en 13.080.30, 10.99 23611-3:2019, IDT invertebrates - Part 3: Sampling and 13.080.05 extraction of enchytraeids BAS/TC 7 prBAS EN 13071-3:2021 EN 13071-3:2019, IDT Stationary waste containers up to 5 000 pr en 13.030.40 10.99 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
BAS/TC 7 prBAS EN 17255-2:2021 EN 17255-2:2020, IDT Stationary source emissions - Data pr en 13.040.40 10.99 acquisition and handling systems - Part 2: Specification of requirements on data acquisition and handling systems
BAS/TC 7 prBAS CEN/TR 16192:2021 CEN/TR 16192:2020, IDT Waste - Guidance on analysis of eluates pr en 13.030.99 10.99
BAS/TC 7 prBAS EN ISO 11074/A1:2021 EN ISO 11074:2015/A1:2020, Soil quality - Vocabulary - Amendment 1 pr en 13.080.01, 10.99 IDT; ISO 11074:2015/Amd 01.040.13 1:2020, IDT BAS/TC 7 prBAS EN ISO 13161:2021 EN ISO 13161:2020, IDT; ISO Water quality - Polonium 210 - Test pr en 17.240, 10.99 13161:2020, IDT method using alpha spectrometry 13.060.60
94 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 7 prBAS EN ISO 16558-1/A1:2021 EN ISO 16558-1:2015/A1:2020, Soil quality - Risk-based petroleum pr en 13.080.10 10.99 IDT; ISO 16558-1:2015/Amd hydrocarbons - Part 1: Determination of 1:2020, IDT aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) - Amendment 1 BAS/TC 7 prBAS EN ISO 21877:2021 EN ISO 21877:2019, IDT; ISO Stationary source emissions - pr en 13.040.40 10.99 21877:2019, IDT Determination of the mass concentration of ammonia - Manual method
BAS/TC 7 prBAS EN 14803:2021 EN 14803:2020, IDT Identification and/or determination of the pr en 13.030.40 10.99 quantity of waste BAS/TC 7 prBAS EN 17322:2021 EN 17322:2020, IDT Environmental Solid Matrices - pr en 13.030.10, 10.99 Determination of polychlorinated 13.080.10, biphenyls (PCB) by gas chromatography 13.030.20, - mass selective detection (GC-MS) or 13.030.01 electron-capture detection (GC-ECD)
BAS/TC 7 prBAS EN 17366:2021 EN 17366:2020, IDT Waste management - Access control to pr en 13.030.40 10.99 collection containers - Identification and authorization BAS/TC 7 prBAS EN ISO 14050:2021 EN ISO 14050:2020, IDT; ISO Environmental management - pr en 13.020.10, 10.99 14050:2020, IDT Vocabulary 01.040.13 BAS/TC 7 prBAS EN ISO 22125-2:2021 EN ISO 22125-2:2019, IDT; ISO Water quality - Technetium-99 - Part 2: pr en 17.240, 10.99 22125-2:2019, IDT Test method using inductively coupled 13.060.60 plasma mass spectrometry (ICP-MS)
BAS/TC 7 prBAS EN ISO 22125-1:2021 EN ISO 22125-1:2019, IDT; ISO Water quality - Technetium-99 - Part 1: pr en 17.240, 10.99 22125-1:2019, IDT Test method using liquid scintillation 13.060.60 counting BAS/TC 7 prBAS EN ISO 22908:2021 EN ISO 22908:2020, IDT; ISO Water quality - Radium 226 and Radium pr en 17.240, 10.99 22908:2020, IDT 228 - Test method using liquid 13.280, scintillation counting 13.060.60 BAS/TC 7 prBAS CEN/TS 17434:2021 CEN/TS 17434:2020, IDT Ambient air - Determination of the pr en 13.040.20 10.99 particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
95 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 7 prBAS EN 17359:2021 EN 17359:2020, IDT Stationary source emissions - pr en 13.040.20 10.99 Bioaerosols and biological agents - Sampling of bioaerosols and collection in liquids - Impingement method BAS/TC 7 prBAS EN ISO 14008:2021 EN ISO 14008:2020, IDT; ISO Monetary valuation of environmental pr en 13.020.20 10.99 14008:2019, IDT impacts and related environmental aspects BAS/TC 7 prBAS EN ISO 13164-1:2021 EN ISO 13164-1:2020, IDT; ISO Water quality - Radon-222 - Part 1: pr en 17.240, 10.99 13164-1:2013, IDT General principles 13.280, 13.060.60 BAS/TC 7 prBAS EN ISO 13164-3:2021 EN ISO 13164-3:2020, IDT; ISO Water quality - Radon-222 - Part 3: Test pr en 17.240, 10.99 13164-3:2013, IDT method using emanometry 13.280, 13.060.60 BAS/TC 7 prBAS EN ISO 13164-2:2021 EN ISO 13164-2:2020, IDT; ISO Water quality - Radon-222 - Part 2: Test pr en 17.240, 10.99 13164-2:2013, IDT method using gamma-ray spectrometry 13.280, 13.060.60 BAS/TC 7 prBAS EN ISO 13164-4:2021 EN ISO 13164-4:2020, IDT; ISO Water quality - Radon-222 - Part 4: Test pr en 17.240, 10.99 13164-4:2015, IDT method using two-phase liquid 13.280, scintillation counting 13.060.60 BAS/TC 7 prBAS EN ISO 29464:2021 EN ISO 29464:2019, IDT; ISO Cleaning of air and other gases - pr en 91.140.30, 10.99 29464:2017, IDT Terminology 01.040.91 BAS/TC 7 prBAS EN ISO 14063:2021 EN ISO 14063:2020, IDT; ISO Environmental management - pr en 13.020.10 10.99 14063:2020, IDT Environmental communication - Guidelines and examples BAS/TC 7 prBAS EN ISO 13165-2:2021 EN ISO 13165-2:2020, IDT; ISO Water quality - Radium-226 - Part 2: pr en 17.240, 10.99 13165-2:2014, IDT Test method using emanometry 13.060.60 BAS/TC 7 prBAS EN ISO 13165-1:2021 EN ISO 13165-1:2020, IDT; ISO Water quality - Radium-226 - Part 1: pr en 17.240, 10.99 13165-1:2013, IDT Test method using liquid scintillation 13.060.60 counting BAS/TC 7 prBAS EN ISO 21365:2021 EN ISO 21365:2020, IDT; ISO Soil quality - Conceptual site models for pr en 13.080.01 10.99 21365:2019, IDT potentially contaminated sites BAS/TC 7 prBAS EN ISO 13165-3:2021 EN ISO 13165-3:2020, IDT; ISO Water quality - Radium-226 - Part 3: pr en 17.240, 10.99 13165-3:2016, IDT Test method using coprecipitation and 13.060.60 gamma-spectrometry BAS/TC 7 prBAS EN ISO 21832:2021 EN ISO 21832:2020, IDT; ISO Workplace air - Metals and metalloids in pr en 13.040.30 10.99 21832:2018, IDT airborne particles - Requirements for evaluation of measuring procedures
96 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 7 prBAS EN 12897+A1:2021 EN 12897:2016+A1:2020, IDT Water supply - Specification for pr en 91.140.65 10.99 indirectly heated unvented (closed) storage water heaters BAS/TC 7 prBAS EN ISO 21286:2021 EN ISO 21286:2020, IDT; ISO Soil quality - Identification of pr en 13.080.30 10.99 21286:2019, IDT ecotoxicological test species by DNA barcoding BAS/TC 7 prBAS EN ISO 21479:2021 EN ISO 21479:2020, IDT; ISO Soil quality - Determination of the effects pr en 13.080.30 10.99 21479:2019, IDT of pollutants on soil flora - Leaf fatty acid composition of plants to assess soil quality BAS/TC 7 prBAS EN ISO 29200:2021 EN ISO 29200:2020, IDT; ISO Soil quality - Assessment of genotoxic pr en 13.080.30 10.99 29200:2013, IDT effects on higher plants - Vicia faba micronucleus test BAS/TC 7 prBAS EN ISO 15685:2021 EN ISO 15685:2020, IDT; ISO Soil quality - Determination of potential pr en 13.080.30 10.99 15685:2012, IDT nitrification and inhibition of nitrification - Rapid test by ammonium oxidation BAS/TC 7 prBAS EN ISO 17512-2:2021 EN ISO 17512-2:2020, IDT; ISO Soil quality - Avoidance test for pr en 13.080.30 10.99 17512-2:2011, IDT determining the quality of soils and effects of chemicals on behaviour - Part 2: Test with collembolans (Folsomia candida) BAS/TC 7 prBAS EN ISO 15473:2021 EN ISO 15473:2020, IDT; ISO Soil quality - Guidance on laboratory pr en 13.080.30 10.99 15473:2002, IDT testing for biodegradation of organic chemicals in soil under anaerobic conditions BAS/TC 7 prBAS EN ISO 14239:2021 EN ISO 14239:2020, IDT; ISO Soil quality - Laboratory incubation pr en 13.080.30 10.99 14239:2017, IDT systems for measuring the mineralization of organic chemicals in soil under aerobic conditions BAS/TC 7 prBAS EN ISO 21285:2021 EN ISO 21285:2020, IDT; ISO Soil quality - Inhibition of reproduction of pr en 13.080.30 10.99 21285:2019, IDT the soil mite (Hypoaspis aculeifer) by soil contaminants BAS/TC 7 prBAS EN ISO 18763:2021 EN ISO 18763:2020, IDT; ISO Soil quality - Determination of the toxic pr en 13.080.30 10.99 18763:2016, IDT effects of pollutants on germination and early growth of higher plants
97 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 7 prBAS EN ISO 20130:2021 EN ISO 20130:2020, IDT; ISO Soil quality - Measurement of enzyme pr en 13.080.30 10.99 20130:2018, IDT activity patterns in soil samples using colorimetric substrates in micro-well plates BAS/TC 7 prBAS EN ISO 11266:2021 EN ISO 11266:2020, IDT; ISO Soil quality - Guidance on laboratory pr en 13.080.30 10.99 11266:1994, IDT testing for biodegradation of organic chemicals in soil under aerobic conditions BAS/TC 7 prBAS EN ISO 17512-1:2021 EN ISO 17512-1:2020, IDT; ISO Soil quality - Avoidance test for pr en 13.080.30 10.99 17512-1:2008, IDT determining the quality of soils and effects of chemicals on behaviour - Part 1: Test with earthworms (Eisenia fetida and Eisenia andrei) BAS/TC 7 prBAS EN ISO 17155:2021 EN ISO 17155:2020, IDT; ISO Soil quality - Determination of pr en 13.080.30 10.99 17155:2012, IDT abundance and activity of soil microflora using respiration curves BAS/TC 7 prBAS EN ISO 14007:2021 EN ISO 14007:2020, IDT; ISO Environmental management - pr en 13.020.20 10.99 14007:2019, IDT Guidelines for determining environmental costs and benefits BAS/TC 7 prBAS EN ISO 5667-6/A11:2021 EN ISO 5667-6:2016/A11:2020, Water quality - Sampling - Part 6: pr en 13.060.10, 10.99 IDT; ISO 5667-6:2014, IDT Guidance on sampling of rivers and 13.060.45 streams BAS/TC 8 prBAS CLC/TS 51643-32:2021 CLC/TS 51643-32:2020, IDT Low-voltage surge protective devices - pr en 29.120.50, 10.99 Part 32: Surge protective devices 27.160 connected to the DC side of photovoltaic installations - Selection and application principles BAS/TC 8 prBAS EN 50186-2/A1:2021 EN 50186-2:1998/A1:2019, IDT Live-line washing systems for power pr en 29.260.10 10.99 installations with nominal voltages above 1kV - Part 2: Specific national requirements (national annexes to EN 50186-1:1998) BAS/TC 8 prBAS EN 60060-1:2021 EN 60060-1:2010, IDT; IEC High-voltage test techniques - Part 1: pv sr, en 17.220.20 10.99 60060-1:2010, IDT General definitions and test requirements BAS/TC 8 prBAS EN 61482-2:2021 EN 61482-2:2020, IDT; IEC Live working - Protective clothing pr en,fr 13.220.40, 10.99 61482-2:2018, MOD against the thermal hazards of an 29.260 electric arc - Part 2: Requirements
98 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 8 prBAS EN IEC 60120:2021 EN IEC 60120:2020, IDT; IEC Ball and socket couplings of string pr en,fr 29.080.10, 10.99 60120:2020, IDT insulator units - Dimensions 29.240.20 BAS/TC 8 prBAS EN IEC 60372:2021 EN IEC 60372:2020, IDT; IEC Locking devices for ball and socket pr en,fr 29.080.10, 10.99 60372:2020, IDT couplings of string insulator units - 29.240.20, Dimensions and tests 29.035.99, 17.220.99 BAS/TC 8 prBAS EN IEC 60471:2021 EN IEC 60471:2020, IDT; IEC Clevis and tongue couplings of string pr en,fr 29.080.10, 10.99 60471:2020, IDT insulator units - Dimensions 29.240.20 BAS/TC 8 prBAS EN IEC 60664-1:2021 EN IEC 60664-1:2020, IDT; IEC Insulation coordination for equipment pr en,fr 29.080.30, 10.99 60664-1:2020, IDT within low-voltage supply systems - Part 29.080 1: Principles, requirements and tests
BAS/TC 8 prBAS EN IEC 60895:2021 EN IEC 60895:2020, IDT; IEC Live working - Conductive clothing pr en,fr 29.260.01, 10.99 60895:2020, IDT 29.260.99, 29.240.20, 29.240, 13.260 BAS/TC 8 prBAS EN IEC 60900/Cor 1:2021 EN IEC 60900:2018/AC:2019-02, Live working - Hand tools for use up to 1 pr en,fr 29.260.99, 10.99 IDT; IEC 000 V AC and 1 500 V DC 29.240.20, 60900:2018/COR1:2019, IDT 13.260 BAS/TC 8 prBAS EN IEC 60900/Cor 2:2021 EN IEC 60900:2018/AC:2020-05, Live working - Hand tools for use up to 1 pr en,fr 29.260.99, 10.99 IDT; IEC 000 V AC and 1 500 V DC 29.240.20, 60900:2018/COR2:2020, IDT 13.260 BAS/TC 8 prBAS EN IEC 61643-331:2021 EN IEC 61643-331:2020, IDT; Components for low-voltage surge pr en 31.040.20, 10.99 IEC 61643-331:2020, IDT protection - Part 331: Performance 31.040 requirements and test methods for metal oxide varistors (MOV) BAS/TC 8 prBAS EN IEC 61643-341:2021 EN IEC 61643-341:2020, IDT; Components for low-voltage surge pr en,fr 31.080.10 10.99 IEC 61643-341:2020, IDT protection - Part 341: Performance requirements and test circuits for thyristor surge suppressors (TSS) BAS/TC 8 prBAS EN IEC 61857-32:2021 EN IEC 61857-32:2019, IDT; IEC Electrical insulation systems - pr en,fr 29.080.30 10.99 61857-32:2019, IDT Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing
99 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 8 prBAS IEC 60493-1:2021 IEC 60493-1:2011, IDT Guide for the statistical analysis of pr en,fr 29.035.01 10.99 ageing test data - Part 1: Methods based on mean values of normally distributed test results BAS/TC 9 prBAS CEN/TR 14245:2021 CEN/TR 14245:2020, IDT Cement - Guidelines for the application pr en 91.100.10 10.99 of EN 197-2: Assessment and verification of constancy of performance
BAS/TC 9 prBAS EN 197-2:2021 EN 197-2:2020, IDT Cement - Part 2: Assessment and pr en 91.100.10 10.99 verification of constancy of performance
BAS/TC 9 prBAS ISO 15900:2021 ISO 15900:2020, IDT Determination of particle size ko en 19.120 10.99 distribution - Differential electrical mobility analysis for aerosol particles BAS/TC 9 prBAS ISO 13320:2021 ISO 13320:2020, IDT Particle size analysis - Laser diffraction ko en 19.120 10.99 methods BAS/TC 9 prBAS ISO 17867:2021 ISO 17867:2020, IDT Particle size analysis - Small angle X- ko en 19.120 10.99 ray scattering (SAXS) BAS/TC 9 prBAS ISO 14411-2:2021 ISO 14411-2:2020, IDT Preparation of particulate reference ko en 19.120 10.99 materials - Part 2: Polydisperse spherical particles BAS/TC 9 prBAS ISO 21501-2:2021 ISO 21501-2:2019, IDT Determination of particle size ko en 19.120 10.99 distribution - Single particle light interaction methods - Part 2: Light scattering liquid-borne particle counter BAS/TC 9 prBAS ISO 21501-3:2021 ISO 21501-3:2019, IDT Determination of particle size ko en 19.120 10.99 distribution - Single particle light interaction methods - Part 3: Light extinction liquid-borne particle counter BAS/TC 10 prBAS CLC/TR 50608:2021 CLC/TR 50608:2013, IDT Smart grid projects in Europe pv bs,en 29.240.01, 10.99 27.010 BAS/TC 10 prBAS CLC/TS 50654-1:2021 CLC/TS 50654-1:2020, IDT HVDC Grid Systems and connected pr en 29.240.01 10.99 Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 1: Guidelines
100 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 10 prBAS CLC/TS 50654-2:2021 CLC/TS 50654-2:2020, IDT HVDC Grid Systems and connected pr en 29.240.01 10.99 Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2: Parameter Lists
BAS/TC 10 prBAS EN 50678:2021 EN 50678:2020, IDT General procedure for verifying the pr en 17.220.20 10.99 effectiveness of the protective measures of electrical equipment after repair
BAS/TC 10 prBAS EN IEC 62056-8-8:2021 EN IEC 62056-8-8:2020, IDT; Electricity metering data exchange - The pr en,fr 91.140.50, 10.99 IEC 62056-8-8:2020, IDT DLMS/COSEM suite - Part 8-8: 35.110, Communication profile for ISO/IEC 17.220 14908 series networks BAS/TC 10 prBAS EN IEC 63155:2021 EN IEC 63155:2020, IDT; IEC Guidelines for the measurement method pr en,fr 31.140 10.99 63155:2020, IDT of power durability for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) applications BAS/TC 10 psBAS EN 62053-23/A1:2020 EN 62053- Electricity metering equipment (a.c.) - pv bs,en 17.220.20 50.60 23:2003/A1:2017/AC:2018-05, Particular requirements - Part 23: Static IDT; EN 62053-23:2003/A1:2017, meters for reactive energy (classes 2 IDT; IEC 62053- and 3) 23:2003/AMD1:2016/COR1:2018 , IDT; IEC 62053- 23:2003/AMD1:2016, IDT
BAS/TC 10 psBAS EN 62053- EN 62053- Electricity metering equipment (a.c.) - pv bs,en 91.140.50, 50.60 24/A1/Cor1:2020 24:2015/A1:2017/AC:2018-05, Particular requirements - Part 24: Static 17.220.20 IDT; IEC 62053- meters for reactive energy at 24:2014/AMD1:2016/COR1:2018 fundamental frequency (classes 0,5 S, 1 , IDT S and 1) BAS/TC 11 prBAS EN ISO 4259-1:2021 EN ISO 4259-1:2017/A1:2019, Petroleum and related products - pv bs, en 75.080 10.99 IDT; EN ISO 4259-1:2017, IDT; Precision of measurement methods and ISO 4259-1:2017/Amd 1:2019, results - Part 1: Determination of IDT; ISO 4259-1:2017, IDT precision data in relation to methods of test
101 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 11 prBAS EN ISO 4259-2:2021 EN ISO 4259-2:2017/A1:2019, Petroleum and related products - pv bs, en 75.080 10.99 IDT; EN ISO 4259-2:2017, IDT; Precision of measurement methods and ISO 4259-2:2017/Amd 1:2019, results - Part 2: Interpretation and IDT; ISO 4259-2:2017, IDT application of precision data in relation to methods of test BAS/TC 11 prBAS EN 16808:2021 EN 16808:2020, IDT Petroleum, petrochemical and natural pr en 75.180.10 10.99 gas industries - Safety of machineries - Manual elevators BAS/TC 11 prBAS EN ISO 29001:2021 EN ISO 29001:2020, IDT; ISO Petroleum, petrochemical and natural pr en 03.100.70, 10.99 29001:2020, IDT gas industries - Sector-specific quality 75.020, management systems - Requirements 03.120.10 for product and service supply organizations BAS/TC 11 prBAS EN 267:2021 EN 267:2020, IDT Forced draught burners for liquid fuels pr en 27.060.10 10.99
BAS/TC 11 prBAS EN ISO 14935:2021 EN ISO 14935:2020, IDT; ISO Petroleum and related products - pr en 75.080 10.99 14935:2020, IDT Determination of wick flame persistence of fire-resistant fluids BAS/TC 11 prBAS EN ISO 20321:2021 EN ISO 20321:2020, IDT; ISO Petroleum, petrochemical and natural pr en 13.110, 10.99 20321:2020, IDT gas industries - Safety of machineries - 75.180.10 Powered elevators BAS/TC 11 prBAS EN 12514:2021 EN 12514:2020, IDT Components for supply systems for pr en 75.200, 10.99 consuming units with liquid fuels 27.060.10 BAS/TC 11 prBAS EN ISO 20846:2021 EN ISO 20846:2019, IDT; ISO Petroleum products - Determination of pr en 75.160.20, 10.99 20846:2019, IDT sulfur content of automotive fuels - 75.160.30 Ultraviolet fluorescence method BAS/TC 11 prBAS EN ISO 4259-3:2021 EN ISO 4259-3:2020, IDT; ISO Petroleum and related products - pr en 75.080 10.99 4259-3:2020, IDT Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test BAS/TC 11 prBAS EN ISO 8222:2021 EN ISO 8222:2020, IDT; ISO Petroleum measurement systems - pr en 75.180.30 10.99 8222:2020, IDT Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials)
102 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 11 prBAS EN ISO 12922:2021 EN ISO 12922:2020, IDT; ISO Lubricants, industrial oils and related pr en 75.120 10.99 12922:2020, IDT products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
BAS/TC 11 prBAS CEN/TR 17491:2021 CEN/TR 17491:2020, IDT Automotive fuels - Information on pr en 75.160.20 10.99 aniline, N-methyl aniline, N-ethyl aniline, N,N di-methyl aniline and secondary- butyl acetate when used as blending components in unleaded petrol
BAS/TC 11 prBAS EN ISO 5165:2021 EN ISO 5165:2020, IDT; ISO Petroleum products - Determination of pr en 75.160.20 10.99 5165:2020, IDT the ignition quality of diesel fuels - Cetane engine method BAS/TC 11 prBAS EN ISO 8973/A1:2021 EN ISO 8973:1999/A1:2020, IDT; Liquefied petroleum gases - Calculation pr en 75.160.30 10.99 ISO 8973:1997/Amd 1:2020, IDT method for density and vapour pressure - Amendment 1 BAS/TC 11 prBAS EN ISO 13758/A1:2021 EN ISO 13758:1996/A1:2020, Liquefied petroleum gases - pr en 75.160.30 10.99 IDT; ISO 13758:1996/Amd Assessment of the dryness of propane - 1:2020, IDT Valve freeze method - Amendment 1 BAS/TC 11 prBAS EN ISO 13680:2021 EN ISO 13680:2020, IDT; ISO Petroleum and natural gas industries - pr en 77.140.75, 10.99 13680:2020, IDT Corrosion-resistant alloy seamless 75.180.10 tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions BAS/TC 11 prBAS EN ISO 19905-3:2021 EN ISO 19905-3:2019, IDT; ISO Petroleum and natural gas industries - pr en 75.180.10 10.99 19905-3:2017, IDT Site-specific assessment of mobile offshore units - Part 3: Floating unit BAS/TC 11 prBAS CEN ISO/TS 35105:2021 CEN ISO/TS 35105:2019, IDT; Petroleum and natural gas industries - pr en 75.020 10.99 ISO/TS 35105:2018, IDT Arctic operations - Material requirements for arctic operations BAS/TC 11 prBAS EN ISO 35101:2021 EN ISO 35101:2019, IDT; ISO Petroleum and natural gas industries - pr en 75.020 10.99 35101:2017, IDT Arctic operations - Working environment
BAS/TC 11 prBAS CEN/TR 15367-1:2021 CEN/TR 15367-1:2020, IDT Petroleum products - Guidelines for pr en 75.200, 10.99 good housekeeping - Part 1: Automotive 75.160.20, diesel fuels 03.100.50
103 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 11 prBAS EN ISO 11961/A1:2021 EN ISO 11961:2018/A1:2020, Petroleum and natural gas industries - pr en 77.140.75 10.99 IDT; ISO 11961:2018/Amd Steel drill pipe - Amendment 1 1:2020, IDT BAS/TC 11 prBAS EN ISO 23251:2021 EN ISO 23251:2020, IDT; ISO Petroleum, petrochemical and natural pr en 75.180.20 10.99 23251:2019, IDT gas industries - Pressure-relieving and depressuring systems BAS/TC 11 prBAS CEN/TR 15522-1:2021 CEN/TR 15522-1:2006, IDT Oil spill identification - Waterborne pr en 13.020.40 10.99 petroleum and petroleum products - Part 1: Sampling BAS/TC 13 prBAS EN 16856:2021 EN 16856:2020, IDT Portable aerosol dispensers for fire pr en 13.220.10 10.99 extinguishing purposes BAS/TC 13 prBAS EN 54-3+A1:2021 EN 54-3:2014+A1:2019, IDT Fire detection and fire alarm systems - pr en 13.220.20 10.99 Part 3: Fire alarm devices - Sounders BAS/TC 13 prBAS EN 54-22+A1:2021 EN 54-22:2015+A1:2020, IDT Fire detection and fire alarm systems - pr en 13.220.10, 10.99 Part 22: Resettable line-type heat 13.220.20 detectors BAS/TC 13 prBAS EN 54-13+A1:2021 EN 54-13:2017+A1:2019, IDT Fire detection and fire alarm systems - pr en 13.220.20 10.99 Part 13: Compatibility and connectability assessment of system components
BAS/TC 13 prBAS EN 14972-9:2021 EN 14972-9:2020, IDT Fixed firefighting systems - Water mist pr en 13.220.20 10.99 systems - Part 9: Test protocol for machinery in enclosures not exceeding 260 m³ for open nozzle systems
BAS/TC 13 prBAS EN 14972-8:2021 EN 14972-8:2020, IDT Fixed firefighting systems - Water mist pr en 13.220.20 10.99 systems - Part 8- Test protocol for machinery in enclosures exceeding 260 m³ for open nozzle systems BAS/TC 13 prBAS EN 12259-14:2021 EN 12259-14:2020, IDT Fixed firefighting systems - Components pr en 13.220.20 10.99 for sprinkler and water spray systems - Part 14: Sprinklers for residential applications BAS/TC 13 prBAS EN 12845+A1:2021 EN 12845:2015+A1:2019, IDT Fixed firefighting systems - Automatic pr en 13.220.20 10.99 sprinkler systems - Design, installation and maintenance
104 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 13 prBAS EN 16925/Cor1:2021 EN 16925:2018/AC:2020, IDT Fixed firefighting systems - Automatic pr en 13.220.20 10.99 residential sprinkler systems - Design, installation and maintenance BAS/TC 13 prBAS EN 16750+A1:2021 EN 16750:2017+A1:2020, IDT Fixed firefighting systems - Oxygen pr en 13.220.20 10.99 reduction systems - Design, installation, planning and maintenance BAS/TC 13 prBAS EN 15494:2021 EN 15494:2019, IDT Candles - Product safety labels pr en 71.100.99 10.99 BAS/TC 13 prBAS ISO 7240-3:2021 ISO 7240-3:2020, IDT Fire detection and alarm systems - Part ko en 13.220.20 10.99 3: Audible alarm devices BAS/TC 13 prBAS ISO 7240-13:2021 ISO 7240-13:2020, IDT Fire detection and alarm systems - Part ko en 13.220.20 10.99 13: Compatibility assessment of system components BAS/TC 13 prBAS ISO 6182-6:2021 ISO 6182-6:2020, IDT Fire protection - Automatic sprinkler ko en 13.220.20 10.99 systems - Part 6: Requirements and test methods for check valves BAS/TC 13 prBAS ISO 6182-16:2021 ISO 6182-16:2020, IDT Fire protection - Automatic sprinkler ko en 13.220.20 10.99 systems - Part 16: Requirements and test methods for fire pump relief valves BAS/TC 13 prBAS ISO 6182-17:2021 ISO 6182-17:2020, IDT Fire protection - Automatic sprinkler ko en 13.220.20 10.99 systems - Part 17: Requirements and test methods for pressure reducing valves BAS/TC 13 prBAS ISO 7076-6/A1:2021 ISO 7076-6:2016/Amd 1:2020, Fire protection - Foam fire extinguishing ko en 13.220.10 10.99 IDT systems - Part 6: Vehicle mounted compressed air foam systems — Amendment 1 BAS/TC 13 prBAS ISO 6183/A2:2021 ISO 6183:2009/Amd 2:2019, IDT Fire protection equipment — Carbon ko en 13.220.10 10.99 dioxide extinguishing systems for use on premises — Design and installation — Amendment 2 BAS/TC 13 prBAS ISO 20338:2021 ISO 20338:2019, IDT Oxygen reduction systems for fire ko en 13.220.10 10.99 prevention - Design, installation, planning and maintenance BAS/TC 14 psBAS EN 1176-1:2020 EN 1176-1:2017, IDT Playground equipment and surfacing - pv bs, en 97.200.40 50.99 Part 1: General safety requirements and test methods
105 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 14 prBAS ISO 16073-1:2021 ISO 16073-1:2019, IDT Wildland firefighting personal protective ko en 13.220.10, 10.99 equipment - Requirements and test 13.340.10 methods - Part 1: General BAS/TC 14 prBAS ISO 16073-2:2021 ISO 16073-2:2019, IDT Wildland firefighting personal protective ko en 13.220.10, 10.99 equipment - Requirements and test 13.340.10 methods - Part 2: Compatibility BAS/TC 14 prBAS ISO 16073-3:2021 ISO 16073-3:2019, IDT Wildland firefighting personal protective ko en 13.220.10, 10.99 equipment - Requirements and test 13.340.10 methods - Part 3: Clothing BAS/TC 14 prBAS ISO 16073-4:2021 ISO 16073-4:2019, IDT Wildland firefighting personal protective ko en 13.220.10, 10.99 equipment - Requirements and test 13.340.10 methods - Part 4: Gloves BAS/TC 14 prBAS ISO 16073-5:2021 ISO 16073-5:2019, IDT Wildland firefighting personal protective ko en 13.220.10, 10.99 equipment - Requirements and test 13.340.20 methods - Part 5: Helmets BAS/TC 14 prBAS ISO 16073-7:2021 ISO 16073-7:2019, IDT Wildland firefighting personal protective ko en 13.220.10, 10.99 equipment - Requirements and test 13.340.20 methods - Part 7: Face and eye protection BAS/TC 14 prBAS ISO 16073-8:2021 ISO 16073-8:2019, IDT Wildland firefighting personal protective ko en 13.220.10, 10.99 equipment - Requirements and test 13.340.20 methods - Part 8: Hearing BAS/TC 14 prBAS ISO 16073-9:2021 ISO 16073-9:2020, IDT Wildland firefighting personal protective ko en 13.220.10, 10.99 equipment - Requirements and test 13.340.20 methods - Part 9: Firehoods BAS/TC 14 prBAS ISO 16900-5/A1:2021 ISO 16900-5:2016/Amd 1:2018, RPD head forms front and side view ko en 13.340.30 10.99 IDT BAS/TC 14 prBAS ISO/TS 16975-2:2021 ISO/TS 16975-2:2016, IDT Respiratory protective devices - ko en 13.340.30 10.99 Selection, use and maintenance - Part 2: Condensed guidance to establishing and implementing a respiratory protective device programme BAS/TC 14 prBAS ISO/TS 16975-1:2021 ISO/TS 16975-1:2016, IDT Respiratory protective devices - ko en 13.340.30 10.99 Selection, use and maintenance - Part 1: Establishing and implementing a respiratory protective device programme
106 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 14 prBAS ISO 16975-3:2021 ISO 16975-3:2017, IDT Respiratory protective devices - ko en 13.340.30 10.99 Selection, use and maintenance - Part 3: Fit-testing procedures BAS/TC 14 prBAS ISO 16900-14:2021 ISO 16900-14:2020, IDT Respiratory protective devices - ko en 13.340.30 10.99 Methods of test and test equipment - Part 14: Measurement of sound pressure level BAS/TC 14 prBAS ISO 16900-7:2021 ISO 16900-7:2020, IDT Respiratory protective devices - ko en 13.340.30 10.99 Methods of test and test equipment - Part 7: Practical performance test methods BAS/TC 14 prBAS ISO 15384:2021 ISO 15384:2018, IDT Protective clothing for firefighters - ko en 13.340.10 10.99 Laboratory test methods and performance requirements for wildland firefighting clothing BAS/TC 14 prBAS ISO 11393-2:2021 ISO 11393-2:2018, IDT Protective clothing for users of hand- ko en 13.340.10 10.99 held chainsaws - Part 2: Performance requirements and test methods for leg protectors BAS/TC 14 prBAS ISO 11393-4:2021 ISO 11393-4:2018, IDT Protective clothing for users of hand- ko en 13.340.40 10.99 held chainsaws - Part 4: Performance requirements and test methods for protective gloves BAS/TC 14 prBAS EN 407:2021 EN 407:2020, IDT Protective gloves and other hand pr en 13.340.40 10.99 protective equipments against thermal risks (heat and/or fire) BAS/TC 14 prBAS EN ISO 12402-3:2021 EN ISO 12402-3:2020, IDT; ISO Personal flotation devices - Part 3: pr en 13.340.70 10.99 12402-3:2020, IDT Lifejackets, performance level 150 - Safety requirements BAS/TC 14 prBAS EN ISO 12402-5:2021 EN ISO 12402-5:2020, IDT; ISO Personal flotation devices - Part 5: pr en 13.340.70 10.99 12402-5:2020, IDT Buoyancy aids (level 50) - Safety requirements BAS/TC 14 prBAS EN ISO 12402-8:2021 EN ISO 12402-8:2020, IDT; ISO Personal flotation devices - Part 8: pr en 13.340.70 10.99 12402-8:2020, IDT Accessories - Safety requirements and test methods BAS/TC 14 prBAS EN ISO 12402-4:2021 EN ISO 12402-4:2020, IDT; ISO Personal flotation devices - Part 4: pr en 13.340.70 10.99 12402-4:2020, IDT Lifejackets, performance level 100 - Safety requirements
107 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 14 prBAS EN ISO 12402-9:2021 EN ISO 12402-9:2020, IDT; ISO Personal flotation devices - Part 9: pr en 13.340.70 10.99 12402-9:2020, IDT Evaluation BAS/TC 14 prBAS EN ISO 12402-2:2021 EN ISO 12402-2:2020, IDT; ISO Personal flotation devices - Part 2: pr en 13.340.70 10.99 12402-2:2020, IDT Lifejackets, performance level 275 - Safety requirements BAS/TC 14 prBAS EN ISO 12402-6:2021 EN ISO 12402-6:2020, IDT; ISO Personal flotation devices - Part 6: pr en 13.340.70 10.99 12402-6:2020, IDT Special application lifejackets and buoyancy aids - Safety requirements and additional test methods BAS/TC 14 prBAS EN ISO 11393-2:2021 EN ISO 11393-2:2019, IDT; ISO Protective clothing for users of hand- pr en 13.340.50, 10.99 11393-2:2018, IDT held chainsaws - Part 2: Performance 13.340.10 requirements and test methods for leg protectors BAS/TC 14 prBAS EN 13819-3:2021 EN 13819-3:2019, IDT Hearing protectors - Testing - Part 3: pr en 13.340.20 10.99 Supplementary acoustic test methods BAS/TC 14 prBAS EN 17232:2021 EN 17232:2020, IDT Water play equipment and features - pr en 97.220.40 10.99 Safety requirements, test methods and operational requirements BAS/TC 14 prBAS EN ISO 21420:2021 EN ISO 21420:2020, IDT; ISO Protective gloves - General pr en 13.340.40 10.99 21420:2020, IDT requirements and test methods BAS/TC 14 prBAS EN 1176-5:2021 EN 1176-5:2019, IDT Playground equipment and surfacing - pr en 97.200.40 10.99 Part 5: Additional specific safety requirements and test methods for carousels BAS/TC 14 prBAS EN 1176-7:2021 EN 1176-7:2020, IDT Playground equipment and surfacing - pr en 97.200.40 10.99 Part 7: Guidance on installation, inspection, maintenance and operation BAS/TC 14 prBAS EN 17109:2021 EN 17109:2020, IDT Mountaineering equipment - Individual pr en 97.220.40 10.99 safety systems for rope courses - Safety requirements and test methods BAS/TC 14 prBAS EN 14960-2:2021 EN 14960-2:2019, IDT Inflatable play equipment - Part 2: pr en 97.200.50, 10.99 Additional safety requirements for 97.190 inflatable bouncing pillows intended for permanent installation BAS/TC 14 prBAS EN 14960-3:2021 EN 14960-3:2020, IDT Inflatable play equipment - Part 3: pr en 97.200.50, 10.99 Additional safety requirements and test 97.190 methods for snappies
108 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 14 prBAS EN ISO 15384:2021 EN ISO 15384:2020, IDT; ISO Protective clothing for firefighters - pr en 13.340.10 10.99 15384:2018, IDT Laboratory test methods and performance requirements for wildland firefighting clothing BAS/TC 14 prBAS EN ISO 11393-4:2021 EN ISO 11393-4:2019, IDT; ISO Protective clothing for users of hand- pr en 13.340.40 10.99 11393-4:2018, IDT held chainsaws - Part 4: Performance requirements and test methods for protective gloves BAS/TC 14 prBAS EN ISO 20320:2021 EN ISO 20320:2020, IDT; ISO Protective clothing for use in pr en 97.220.20, 10.99 20320:2020, IDT Snowboarding - Wrist Protectors - 13.340.40 Requirements and test methods BAS/TC 14 prBAS EN 469:2021 EN 469:2020, IDT Protective clothing for firefighters - pr en 13.340.10 10.99 Performance requirements for protective clothing for firefighting activities
BAS/TC 14 prBAS EN 17092-1:2021 EN 17092-1:2020, IDT Protective garments for motorcycle pr en 13.340.10 10.99 riders - Part 1: Test methods BAS/TC 14 prBAS EN 17092-2:2021 EN 17092-2:2020, IDT Protective garments for motorcycle pr en 13.340.10 10.99 riders - Part 2: Class AAA garments - Requirements BAS/TC 14 prBAS EN 17092-3:2021 EN 17092-3:2020, IDT Protective garments for motorcycle pr en 13.340.10 10.99 riders - Part 3: Class AA garments - Requirements BAS/TC 14 prBAS EN 17092-4:2021 EN 17092-4:2020, IDT Protective garments for motorcycle pr en 13.340.10 10.99 riders - Part 4: Class A garments - Requirements BAS/TC 14 prBAS EN 17092-5:2021 EN 17092-5:2020, IDT Protective garments for motorcycle pr en 13.340.10 10.99 riders - Part 5: Class B garments - Requirements BAS/TC 14 prBAS EN 17092-6:2021 EN 17092-6:2020, IDT Protective garments for motorcycle pr en 13.340.10 10.99 riders - Part 6: Class C garments - Requirements BAS/TC 14 prBAS EN ISO 21853:2021 EN ISO 21853:2020, IDT; ISO Kite boarding - Release system - Safety pr en 97.220.40 10.99 21853:2020, IDT requirements and test methods BAS/TC 14 prBAS EN ISO 5912:2021 EN ISO 5912:2020, IDT; ISO Camping tents - Requirements and test pr en 97.200.30 10.99 5912:2020, IDT methods BAS/TC 14 prBAS EN ISO 24550:2021 EN ISO 24550:2019, IDT; ISO Ergonomics - Accessible design - pr en 13.180, 10.99 24550:2019, IDT Indicator lights on consumer products 11.180.15
109 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 14 prBAS EN ISO 24551:2021 EN ISO 24551:2019, IDT; ISO Ergonomics - Accessible design - pr en 13.180, 10.99 24551:2019, IDT Spoken instructions of consumer 11.180.15 products BAS/TC 14 prBAS EN 914:2021 EN 914:2020, IDT Gymnastic equipment - Parallel bars pr en 97.220.30 10.99 and combination asymmetric/parallel bars - Requirements and test methods including safety BAS/TC 14 prBAS EN 17353:2021 EN 17353:2020, IDT Protective clothing - Enhanced visibility pr en 13.340.10 10.99 equipment for medium risk situations - Test methods and requirements
BAS/TC 14 prBAS EN 510:2021 EN 510:2019, IDT Specification for protective clothing for pr en 13.340.10 10.99 use where there is a risk of entanglement with moving parts BAS/TC 14 prBAS CEN/TR 16396:2021 CEN/TR 16396:2020, IDT Playground equipment for children - pr en 97.200.40 10.99 Replies to requests for interpretation of EN 1176 and its parts BAS/TC 14 prBAS EN ISO 374-4:2021 EN ISO 374-4:2019, IDT; ISO Protective gloves against dangerous pr en 13.340.40 10.99 374-4:2019, IDT chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals BAS/TC 14 prBAS EN ISO 374-2:2021 EN ISO 374-2:2019, IDT; ISO Protective gloves against dangerous pr en 13.340.40 10.99 374-2:2019, IDT chemicals and micro-organisms - Part 2: Determination of resistance to penetration BAS/TC 14 prBAS EN ISO 13287:2021 EN ISO 13287:2019, IDT; ISO Personal protective equipment - pr en 13.340.50 10.99 13287:2019, IDT Footwear - Test method for slip resistance BAS/TC 14 prBAS EN ISO 18526-4:2021 EN ISO 18526-4:2020, IDT; ISO Eye and face protection - Test methods - pr en 13.340.20 10.99 18526-4:2020, IDT Part 4: Headforms BAS/TC 14 prBAS EN ISO 18526-3:2021 EN ISO 18526-3:2020, IDT; ISO Eye and face protection - Test methods - pr en 13.340.20 10.99 18526-3:2020, IDT Part 3: Physical and mechanical properties BAS/TC 14 prBAS EN ISO 18526-1:2021 EN ISO 18526-1:2020, IDT; ISO Eye and face protection - Test methods - pr en 13.340.20 10.99 18526-1:2020, IDT Part 1: Geometrical optical properties
110 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 14 prBAS EN ISO 18526-2:2021 EN ISO 18526-2:2020, IDT; ISO Eye and face protection - Test methods - pr en 13.340.20 10.99 18526-2:2020, IDT Part 2 : Physical optical properties
BAS/TC 14 prBAS EN ISO 16972:2021 EN ISO 16972:2020, IDT; ISO Respiratory protective devices - pr en 13.340.30, 10.99 16972:2020, IDT Vocabulary and graphical symbols 01.040.13 BAS/TC 14 prBAS EN ISO 9241-110:2021 EN ISO 9241-110:2020, IDT; ISO Ergonomics of human-system pr en 13.180 10.99 9241-110:2020, IDT interaction - Part 110: Interaction principles BAS/TC 14 prBAS EN ISO 27065/A1:2021 EN ISO 27065:2017/A1:2019, Protective clothing - Performance pr en 13.340.10 10.99 IDT; ISO 27065:2017/Amd requirements for protective clothing 1:2019, IDT worn by operators applying pesticides and for re-entry workers - Amendment 1: Surrogate test chemical BAS/TC 14 prBAS EN ISO 18640-1/A1:2021 EN ISO 18640-1:2018/A1:2019, Protective clothing for firefighters - pr en 13.340.10 10.99 IDT; ISO 18640-1:2018/Amd Physiological impact - Part 1: 1:2019, IDT Measurement of coupled heat and moisture transfer with the sweating torso - Amendment 1 BAS/TC 14 prBAS EN ISO 18640-2/A1:2021 EN ISO 18640-2:2018/A1:2019, Protective clothing for firefighters - pr en 13.340.10 10.99 IDT; ISO 18640-2:2018/Amd Physiological impact - Part 2: 1:2019, IDT Determination of physiological heat load caused by protective clothing worn by firefighters - Amendment 1 BAS/TC 14 prBAS CEN/TR 17512:2021 CEN/TR 17512:2020, IDT Personal protective equipment - Smart pr en 59.080.80, 10.99 garments - Terms and definitions 13.340.10, 01.040.59, 01.040.13 BAS/TC 14 prBAS EN 1176-2+Cor1:2021 EN 1176-2:2017+AC:2019, IDT Playground equipment and surfacing - pr en 97.200.40 10.99 Part 2: Additional specific safety requirements and test methods for swings BAS/TC 14 prBAS EN 15567-1+A1:2021 EN 15567-1:2015+A1:2020, IDT Sports and recreational facilities - Ropes pr en 97.220.10 10.99 courses - Part 1: Construction and safety requirements BAS/TC 14 prBAS EN 1651+A1:2021 EN 1651:2018+A1:2020, IDT Paragliding equipment - Harnesses - pr en 97.220.40 10.99 Safety requirements and strength tests
111 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 14 prBAS EN 13451-2+A1:2021 EN 13451-2:2015+A1:2020, IDT Swimming pool equipment - Part 2: pr en 97.220.10 10.99 Additional specific safety requirements and test methods for ladders, stepladders and handle bends BAS/TC 15 prBAS EN 50413:2021 EN 50413:2019, IDT Basic standard on measurement and pr en 33.100.01, 10.99 calculation procedures for human 17.200.20 exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
BAS/TC 15 prBAS EN 50499:2021 EN 50499:2019, IDT Procedure for the assessment of the pr en 17.240 10.99 exposure of workers to electromagnetic fields BAS/TC 15 prBAS EN 55011/A11:2021 EN 55011:2016/A11:2020, IDT Industrial, scientific and medical pr en 33.100.10 10.99 equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement BAS/TC 15 prBAS EN 55014-1/A11:2021 EN 55014-1:2017/A11:2020, IDT Electromagnetic compatibility - pr en 33.100.10 10.99 Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission BAS/TC 15 prBAS EN 55016-1-3/A2:2021 EN 55016-1-3:2006/A2:2020, Specification for radio disturbance and pr en 33.100.20, 10.99 IDT; CISPR 16-1- immunity measuring apparatus and 33.100.10 3:2004/AMD2:2020, IDT methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
BAS/TC 15 prBAS EN 55016-2-3/A1:2021 EN 55016-2-3:2017/A1:2019, Specification for radio disturbance and pr en 33.100.20, 10.99 IDT; CISPR 16-2- immunity measuring apparatus and 33.100.10 3:2016/AMD1:2019, IDT methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements BAS/TC 15 prBAS EN 55032/A11:2021 EN 55032:2015/A11:2020, IDT Electromagnetic compatibility of pr en 33.100.10 10.99 multimedia equipment - Emission Requirements BAS/TC 15 prBAS EN 55035/A11:2021 EN 55035:2017/A11:2020, IDT Electromagnetic compatibility of pr en 33.100.20 10.99 multimedia equipment - Immunity requirements
112 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 15 prBAS EN 60062/A1:2021 EN 60062:2016/A1:2019, IDT; Marking codes for resistors and pr en,fr 31.020 10.99 IEC 60062:2016/AMD1:2019, IDT capacitors
BAS/TC 15 prBAS EN 60115-1/A11:2021 EN 60115-1:2011/A11:2015, IDT Fixed resistors for use in electronic pr en 31.040.10 10.99 equipment - Part 1: Generic specification BAS/TC 15 prBAS EN 61000-4-25/A2:2021 EN 61000-4-25:2002/A2:2020, Electromagnetic compatibility (EMC) - pr en,fr 33.100.99 10.99 IDT; IEC 61000-4- Part 4-25: Testing and measurement 25:2001/AMD2:2019, IDT techniques - HEMP immunity test methods for equipment and systems BAS/TC 15 prBAS EN IEC 55015/A11:2021 EN IEC 55015:2019/A11:2020, Limits and methods of measurement of pr en,fr 33.100.10 10.99 IDT radio disturbance characteristics of electrical lighting and similar equipment
BAS/TC 15 prBAS EN IEC 55015:2021 EN IEC 55015:2019, IDT Limits and methods of measurement of pr en,fr 33.100.10 10.99 radio disturbance characteristics of electrical lighting and similar equipment
BAS/TC 15 prBAS EN IEC 55016-1- EN IEC 55016-1- Specification for radio disturbance and pr en,fr 33.100.20, 10.99 4/A1:2021 4:2019/A1:2020, IDT; CISPR 16- immunity measuring apparatus and 33.100.10 1-4:2019/AMD1:2020, IDT methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements BAS/TC 15 prBAS EN IEC 55036:2021 EN IEC 55036:2020, IDT; CISPR Electric and hybrid electric road vehicles pr en,fr 33.100.20, 10.99 36:2020, IDT - Radio disturbance characteristics - 33.100.10 Limits and methods of measurement for the protection of off-board receivers below 30 MHz BAS/TC 15 prBAS EN IEC 60384- EN IEC 60384-11:2019/AC:2020- Fixed capacitors for use in electronic pr en,fr 31.060.30 10.99 11/Cor1:2021 05, IDT; IEC 60384- equipment - Part 11: Sectional 11:2019/COR1:2020, IDT specification - Fixed polyethylene- terephthalate film dielectric metal foil DC capacitors
113 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 15 prBAS EN IEC 60384-11:2021 EN IEC 60384-11:2019, IDT; IEC Fixed capacitors for use in electronic pr en,fr 31.060.30 10.99 60384-11:2019, IDT equipment - Part 11: Sectional specification - Fixed polyethylene- terephthalate film dielectric metal foil DC capacitors BAS/TC 15 prBAS EN IEC 60384-16:2021 EN IEC 60384-16:2019, IDT; IEC Fixed capacitors for use in electronic pr en,fr 31.060.30 10.99 60384-16:2019, IDT equipment - Part 16: Sectional specification - Fixed metallized polypropylene film dielectric DC capacitors BAS/TC 15 prBAS EN IEC 60384- EN IEC 60384-26:2018/AC:2020- Fixed capacitors for use in electronic pr en,fr 31.060.50 10.99 26/Cor1:2021 05, IDT; IEC 60384- equipment - Part 26: Sectional 26:2018/COR1:2020, IDT specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte BAS/TC 15 prBAS EN IEC 60539-2:2021 EN IEC 60539-2:2019, IDT; IEC Directly heated negative temperature pr en,fr 31.040.30 10.99 60539-2:2019, IDT coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
BAS/TC 15 prBAS EN IEC 61000-3-11:2021 EN IEC 61000-3-11:2019, IDT; Electromagnetic compatibility (EMC) - pr en,fr 33.100.10 10.99 IEC 61000-3-11:2017, IDT Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection
BAS/TC 15 prBAS EN IEC 61000-4- EN IEC 61000-4- Electromagnetic compatibility (EMC) - pr en,fr 33.100.20 10.99 11/Cor1:2021 11:2020/AC:2020-06, IDT; IEC Part 4-11: Testing and measurement 61000-4-11:2020/COR1:2020, techniques - Voltage dips, short IDT interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase BAS/TC 15 prBAS EN IEC 61000-4-11:2021 EN IEC 61000-4-11:2020, IDT; Electromagnetic compatibility (EMC) - pr en,fr 33.100.20 10.99 IEC 61000-4-11:2020, IDT Part 4-11: Testing and measurement techniques - Voltage dips, short
114 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 15 prBAS EN IEC 61000-4- EN IEC 61000-4- Electromagnetic compatibility (EMC) - pr en,fr 33.100.20 10.99 18/Cor1:2021 18:2019/AC:2019-10, IDT; IEC Part 4-18: Testing and measurement 61000-4-18:2019/COR1:2019, techniques - Damped oscillatory wave IDT immunity test BAS/TC 15 prBAS EN IEC 61000-6-4:2021 EN IEC 61000-6-4:2019, IDT; Electromagnetic compatibility (EMC) - pr en,fr 33.100.10 10.99 IEC 61000-6-4:2018, IDT Part 6-4: Generic standards - Emission standard for industrial environments
BAS/TC 15 prBAS EN IEC 61000-6-8:2021 EN IEC 61000-6-8:2020, IDT; Electromagnetic compatibility (EMC) - pr en,fr 33.100.10 10.99 IEC 61000-6-8:2020, IDT Part 6-8: Generic standards - Emission standard for professional equipment in commercial and light-industrial locations
BAS/TC 15 prBAS EN IEC 62209-3:2021 EN IEC 62209-3:2019, IDT; IEC Measurement procedure for the pr en,fr 33.060.20 10.99 62209-3:2019, IDT assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 3: Vector measurement-based systems (Frequency range of 600 MHz to 6 GHz)
BAS/TC 15 prBAS EN IEC 62311:2021 EN IEC 62311:2020, IDT; IEC Assessment of electronic and electrical pr en,fr 97.030 10.99 62311:2019, IDT equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz)
BAS/TC 15 prBAS EN IEC 62812/Cor1:2021 EN IEC 62812:2019/AC:2020-04, Low resistance measurements - pr en,fr 31.040.01 10.99 IDT; IEC Methods and guidance 62812:2019/COR1:2020, IDT BAS/TC 15 prBAS EN IEC 62812:2021 EN IEC 62812:2019, IDT; IEC Low resistance measurements - pr en,fr 31.040.01 10.99 62812:2019, IDT Methods and guidance BAS/TC 16 prBAS EN 13480-3/A2:2021 EN 13480-3:2017/A2:2020, IDT Metallic industrial piping - Part 3: Design pr en 23.040.01 10.99 and calculation BAS/TC 16 prBAS EN ISO 3506-1:2021 EN ISO 3506-1:2020, IDT; ISO Fasteners - Mechanical properties of pr en 21.060.10 10.99 3506-1:2020, IDT corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes
115 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 16 prBAS EN ISO 3506-2:2021 EN ISO 3506-2:2020, IDT; ISO Fasteners - Mechanical properties of pr en 21.060.20 10.99 3506-2:2020, IDT corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes BAS/TC 16 prBAS EN 13480-3/A3:2021 EN 13480-3:2017/A3:2020, IDT Metallic industrial piping - Part 3: Design pr en 23.040.01 10.99 and calculation BAS/TC 16 prBAS EN ISO 7369:2021 EN ISO 7369:2020, IDT; ISO Pipework - Metal hoses and hose pr en 23.040.70, 10.99 7369:2020, IDT assemblies - Vocabulary 01.040.23 BAS/TC 16 prBAS EN 13480-2/A7:2021 EN 13480-2:2017/A7:2020, IDT Metallic industrial piping - Part 2: pr en 23.040.01 10.99 Materials BAS/TC 16 prBAS CEN/TR 1591-2:2021 CEN/TR 1591-2:2020, IDT Flanges and their joints - Design rules pr en 23.040.60 10.99 for gasketed circular flange connections - Part 2: Gasket parameters
BAS/TC 16 prBAS EN 14628-1:2021 EN 14628-1:2020, IDT Ductile iron pipes, fittings and pr en 23.040.40, 10.99 accessories - Requirements and test 23.040.10 methods - Part 1: PE coatings BAS/TC 16 prBAS ISO/TS 14521:2021 ISO/TS 14521:2020, IDT Gears - Calculation of load capacity of ko en 21.200 10.99 worm gears BAS/TC 16 prBAS ISO 1328-2:2021 ISO 1328-2:2020, IDT Cylindrical gears - ISO system of flank ko en 21.200 10.99 tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations
BAS/TC 16 prBAS ISO 2904:2021 ISO 2904:2020, IDT ISO metric trapezoidal screw threads - ko en 21.040.10 10.99 Basic dimensions BAS/TC 16 prBAS ISO 8180:2021 ISO 8180:2020, IDT Ductile iron pipelines - Polyethylene ko en 23.040.10 10.99 sleeving for site application BAS/TC 16 prBAS ISO 6336-1:2021 ISO 6336-1:2019, IDT Calculation of load capacity of spur and ko en 21.200 10.99 helical gears - Part 1: Basic principles, introduction and general influence factors BAS/TC 16 prBAS ISO 6336-2:2021 ISO 6336-2:2019, IDT Calculation of load capacity of spur and ko en 21.200 10.99 helical gears - Part 2: Calculation of surface durability (pitting) BAS/TC 16 prBAS ISO 6336-3:2021 ISO 6336-3:2019, IDT Calculation of load capacity of spur and ko en 21.200 10.99 helical gears - Part 3: Calculation of tooth bending strength
116 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 16 prBAS ISO 6336-6:2021 ISO 6336-6:2019, IDT Calculation of load capacity of spur and ko en 21.200 10.99 helical gears - Part 6: Calculation of service life under variable load BAS/TC 16 prBAS ISO 4468:2021 ISO 4468:2020, IDT Gear hobs - Accuracy requirements ko en 21.200 10.99 BAS/TC 16 prBAS ISO 16134:2021 ISO 16134:2020, IDT Earthquake-resistant and subsidence- ko en 23.040.10 10.99 resistant design of ductile iron pipelines
BAS/TC 16 prBAS ISO 15241/A1:2021 ISO 15241:2012/Amd 1:2020, Rolling bearings — Symbols for physical ko en 21.100.20, 10.99 IDT quantities - AMENDMENT 1 01.075 BAS/TC 16 prBAS ISO 1501/A1:2021 ISO 1501:2009/Amd 1:2020, IDT ISO miniature screw threads - ko en 21.040.30 10.99 AMENDMENT 1: The figure for the tolerance zone of external thread BAS/TC 16 prBAS ISO 68-2/A1:2021 ISO 68-2:1998/Amd 1:2020, IDT ISO general-purpose screw threads — ko en 21.040.20 10.99 Basic profile —Part 2: Inch screw threads - AMENDMENT 1 BAS/TC 16 prBAS ISO 68-1/A1:2021 ISO 68-1:1998/Amd 1:2020, IDT ISO general purpose screw threads — ko en 21.040.10 10.99 Basic profile —Part 1:Metric screw threads - AMENDMENT 1 BAS/TC 16 prBAS ISO 10802:2021 ISO 10802:2020, IDT Ductile iron pipelines - Hydrostatic ko en 23.040.01 10.99 testing after installation BAS/TC 17 prBAS EN ISO 6414:2021 EN ISO 6414:2020, IDT; ISO Technical product documentation (TPD) - pr en 25.030 10.99 6414:2020, IDT Technical drawings for glassware
BAS/TC 17 prBAS EN ISO 128-100:2021 EN ISO 128-100:2020, IDT; ISO Technical product documentation - pr en 25.030 10.99 128-100:2020, IDT General principles of representation - Part 100: Index BAS/TC 17 prBAS EN ISO 7010:2021 EN ISO 7010:2020, IDT; ISO Graphical symbols - Safety colours and pr en 25.030 10.99 7010:2019/Amd 2:2020, IDT; ISO safety signs - Registered safety signs 7010:2019/Amd 1:2020, IDT; ISO 7010:2019, IDT BAS/TC 17 prBAS EN ISO/ASTM 52907:2021 EN ISO/ASTM 52907:2019, IDT; Additive manufacturing - Feedstock pr en 25.030 10.99 ISO/ASTM 52907:2019, IDT materials - Methods to characterize metal powders BAS/TC 17 prBAS EN ISO/ASTM 52904:2021 EN ISO/ASTM 52904:2020, IDT; Additive manufacturing - Process pr en 25.030 10.99 ISO/ASTM 52904:2019, IDT characteristics and performance - Practice for metal powder bed fusion process to meet critical applications
117 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 17 prBAS EN ISO/ASTM 52915:2021 EN ISO/ASTM 52915:2020, IDT; Specification for additive manufacturing pr en 25.030, 10.99 ISO/ASTM 52915:2020, IDT file format (AMF) Version 1.2 35.240.50 BAS/TC 17 prBAS EN IEC 61293:2021 EN IEC 61293:2020, IDT; IEC Marking of electrical equipment with pr en 29.020 10.99 61293:2019, IDT ratings related to electrical supply - Safety requirements BAS/TC 17 prBAS EN IEC/IEEE 82079- EN IEC/IEEE 82079-1:2020, IDT; Preparation of information for use pr en 29.020, 10.99 1:2021 IEC/IEEE 82079-1:2019, IDT (instructions for use) of products - Part 01.110 1: Principles and general requirements BAS/TC 17 prBAS EN IEC 62656-8:2021 EN IEC 62656-8:2020, IDT; IEC Standardized product ontology register pr en 01.110, 10.99 62656-8:2020, IDT and transfer by data parcels - Part 8: 01.040.01 Web service interface for data parcels BAS/TC 17 prBAS IEC 60027-1/Cor1:2021 IEC 60027-1:1992/COR1:1993, Corrigendum 1 - Letter symbols to be pr en 01.060 10.99 IDT used in electrical technology - Part 1: General BAS/TC 17 prBAS ISO 7000:2021 ISO 7000:2019, IDT Graphical symbols for use on equipment ko en 01.080.20 10.99 - Registered symbols BAS/TC 17 prBAS ISO 9957-2:2021 ISO 9957-2:2019, IDT Fluid draughting media - Part 2: Water- ko en 01.100.40 10.99 based non-India ink - Requirements and test conditions BAS/TC 17 prBAS EN ISO 128-1:2021 EN ISO 128-1:2020, IDT; ISO Technical product documentation (TPD) - pv bs 01.100.01 10.99 128-1:2020, IDT General principles of representation - Part 1: Introduction and fundamental requirements BAS/TC 17 prBAS EN ISO 128-2:2021 EN ISO 128-2:2020, IDT; ISO Technical product documentation - pv hr 01.100.01 10.99 128-2:2020, IDT General principles of representation - Part 2: Basic conventions for lines BAS/TC 18 prBAS EN 50708-1-1:2021 EN 50708-1-1:2020, IDT Power transformers - Additional pr en 29.180 10.99 European requirements: Part 1-1: Common part - General requirements BAS/TC 18 prBAS EN 50708-2-1:2021 EN 50708-2-1:2020, IDT Power transformers - Additional pr en 29.180 10.99 European requirements: Part 2-1 Medium power transformer - General requirements BAS/TC 18 prBAS EN 50708-3-1:2021 EN 50708-3-1:2020, IDT Power transformers - Additional pr en 29.180 10.99 European requirements: Part 3-1 Large power transformer - General requirements
118 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 18 prBAS EN 60127-3/A1:2021 EN 60127-3:2015/A1:2020, IDT; Miniature fuses - Part 3: Sub-miniature pr en 29.120.50 10.99 IEC 60127-3:2015/AMD1:2020, fuse-links IDT BAS/TC 18 prBAS EN 60644/A1:2021 EN 60644:2009/A1:2019, IDT; Specification for high-voltage fuse-links pr en,fr 29.120.50 10.99 IEC 60644:2009/AMD1:2019, IDT for motor circuit applications
BAS/TC 18 prBAS EN 61810-1/A1:2021 EN 61810-1:2015/A1:2020, IDT; Electromechanical elementary relays - pr en,fr 29.120.70 10.99 IEC 61810-1:2015/AMD1:2019, Part 1: General and safety requirements IDT BAS/TC 18 prBAS EN IEC 60076-22-7:2021 EN IEC 60076-22-7:2020, IDT; Power transformers - Part 22-7: Power pr en,fr 29.180 10.99 IEC 60076-22-7:2020, IDT transformer and reactor fittings - Accessories and fittings BAS/TC 18 prBAS EN IEC 60282-1:2021 EN IEC 60282-1:2020, IDT; IEC High-voltage fuses - Part 1: Current- pr en,fr 29.120.50 10.99 60282-1:2020, IDT limiting fuses BAS/TC 18 prBAS EN IEC 60282-4:2021 EN IEC 60282-4:2020, IDT; IEC High-voltage fuses - Part 4: Additional pr en,fr 29.120.50 10.99 60282-4:2020, IDT testing requirements for high-voltage expulsion fuses utilizing polymeric insulators BAS/TC 18 prBAS EN IEC 60401-1:2021 EN IEC 60401-1:2020, IDT; IEC Terms and nomenclature for cores pr en,fr 29.100.10 10.99 60401-1:2020, IDT made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions
BAS/TC 18 prBAS EN IEC 60404-7:2021 EN IEC 60404-7:2020, IDT; IEC Magnetic materials - Part 7: Method of pr en,fr 17.220.20, 10.99 60404-7:2019, IDT measurement of the coercivity (up to 29.030 160 kA/m) of magnetic materials in an open magnetic circuit BAS/TC 18 prBAS EN IEC 61007:2021 EN IEC 61007:2020, IDT; IEC Transformers and inductors for use in pr en,fr 29.180, 10.99 61007:2020, IDT electronic and telecommunication 29.100.10 equipment - Measuring methods and test procedures BAS/TC 18 prBAS EN IEC 61631:2021 EN IEC 61631:2020, IDT; IEC Test method for the mechanical strength pr en,fr 29.100.10 10.99 61631:2020, IDT of cores made of magnetic oxides
119 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 18 prBAS EN IEC 62024-2:2021 EN IEC 62024-2:2020, IDT; IEC High frequency inductive components - pr en,fr 29.100.10 10.99 62024-2:2020, IDT Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters
BAS/TC 18 prBAS EN IEC 62025-2:2021 EN IEC 62025-2:2019, IDT; IEC High frequency inductive components - pr en,fr 29.100.10 10.99 62025-2:2019, IDT Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics BAS/TC 18 prBAS EN IEC 62041:2021 EN IEC 62041:2020, IDT; IEC Transformers, power supplies, reactors pr en,fr 33.100, 10.99 62041:2017, IDT and similar products - EMC 29.180 requirements BAS/TC 18 prBAS EN IEC 63093-1:2021 EN IEC 63093-1:2020, IDT; IEC Ferrite cores - Guidelines on dimensions pr en,fr 29.100.10 10.99 63093-1:2020, IDT and the limits of surface irregularities - Part 1: General specification
BAS/TC 18 prBAS EN IEC 63093-2:2021 EN IEC 63093-2:2020, IDT; IEC Ferrite cores - Guidelines on dimensions pr en,fr 29.100.10 10.99 63093-2:2020, IDT and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications BAS/TC 18 prBAS EN IEC 63093-3:2021 EN IEC 63093-3:2020, IDT; IEC Ferrite cores - Guidelines on dimensions pr en,fr 29.100.10 10.99 63093-3:2020, IDT and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches
BAS/TC 18 prBAS EN IEC 63093-9:2021 EN IEC 63093-9:2020, IDT; IEC Ferrite cores - Guidelines on dimensions pr en,fr 29.100.10 10.99 63093-9:2020, IDT and the limits of surface irregularities - Part 9: Planar cores BAS/TC 18 prBAS EN IEC 63182-1:2021 EN IEC 63182-1:2020, IDT; IEC Magnetic powder cores - Guidelines on pr en,fr 29.100.10 10.99 63182-1:2020, IDT dimensions and the limits of surface irregularities - Part 1: General specification BAS/TC 19 prBAS CLC/TS 50703-1:2021 CLC/TS 50703-1:2019, IDT Lightning Protection System pr en 91.120.40 10.99 Components (LPSC) - Part 1: Testing requirements for metal sheets’ joints used in LPS
120 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 19 prBAS EN 50090-5-1:2021 EN 50090-5-1:2020, IDT Home and Building Electronic Systems pr en 97.120, 10.99 (HBES) - Part 5-1: Media and media 35.100.20, dependent layers - Power line for HBES 35.100.10 Class 1 BAS/TC 19 prBAS EN 50090-5-2:2021 EN 50090-5-2:2020, IDT Home and Building Electronic Systems pr en 97.120, 10.99 (HBES) Part 5-2: Media and media 35.100.20, dependent layers - Network based on 35.100.10 HBES Class 1, Twisted Pair BAS/TC 19 prBAS EN 50131-1/A3:2021 EN 50131-1:2006/A3:2020, IDT Alarm systems - Intrusion and hold-up pr en 13.310 10.99 systems - Part 1: System requirements
BAS/TC 19 prBAS EN 50131-13:2021 EN 50131-13:2020, IDT Alarm systems - Intrusion and hold-up pr en 13.320 10.99 systems - Part 13: Pyrotechnic Obscuration Security Devices BAS/TC 19 prBAS EN 50131-2-4:2021 EN 50131-2-4:2020, IDT Alarm systems - Intrusion and hold-up pr en 13.310 10.99 systems - Part 2-4: Requirements for combined passive infrared and microwave detectors BAS/TC 19 prBAS EN 50491-11/A1:2021 EN 50491-11:2015/A1:2020, IDT General requirements for Home and pr en 97.120 10.99 Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 11: Smart Metering - Application Specifications - Simple External Consumer Display BAS/TC 19 prBAS EN 60061-1/A60:2021 EN 60061-1:1993/A60:2020, IDT; Lamp caps and holders together with pr en,fr 29.140.10 10.99 IEC 60061-1:1969/AMD60:2020, gauges for the control of IDT interchangeability and safety - Part 1: Lamp caps BAS/TC 19 prBAS EN 60061-2/A55:2021 EN 60061-2:1993/A55:2020, IDT; Lamp caps and holders together with pr en,fr 29.140.10 10.99 IEC 60061-2:1969/AMD55:2020, gauges for the control of IDT interchangeability and safety - Part 2: Lampholders BAS/TC 19 prBAS EN 60061-2/A56:2021 EN 60061-2:1993/A56:2020, IDT; Lamp caps and holders together with pr en,fr 29.140.10 10.99 IEC 60061-2:1969/AMD56:2020, gauges for the control of IDT interchangeability and safety - Part 2: Lampholders
121 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 19 prBAS EN 60061-3/A57:2021 EN 60061-3:1993/A57:2020, IDT; Lamp caps and holders together with pr en,fr 29.140.10 10.99 IEC 60061-3:1969/AMD57:2020, gauges for the control of IDT interchangeability and safety - Part 3: Gauges BAS/TC 19 prBAS EN 60061-3/A58:2021 EN 60061-3:1993/A58:2020, IDT; Lamp caps and holders together with pr en,fr 29.140.10 10.99 IEC 60061-3:1969/AMD58:2020, gauges for the control of IDT interchangeability and safety - Part 3: Gauges BAS/TC 19 prBAS EN 60570/A2:2021 EN 60570:2003/A2:2020, IDT; Electrical supply track systems for pr en,fr 29.140.40, 10.99 IEC 60570:2003/AMD2:2019, IDT luminaires 29.120.20
BAS/TC 19 prBAS EN 60598-2-22/A1:2021 EN 60598-2-22:2014/A1:2020, Luminaires - Part 2-22: Particular pr en,fr 29.140.40 10.99 IDT; IEC 60598-2- requirements - Luminaires for 22:2014/AMD1:2017, IDT emergency lighting BAS/TC 19 prBAS EN IEC 62031:2021 EN IEC 62031:2020, IDT; IEC LED modules for general lighting - pr en,fr 29.140.99, 10.99 62031:2018, IDT Safety specifications 31.080.99 BAS/TC 19 prBAS EN IEC 62384:2021 EN IEC 62384:2020, IDT; IEC DC or AC supplied electronic pr en,fr 29.140.99, 10.99 62384:2020, IDT controlgear for LED modules - 31.080.99 Performance requirements BAS/TC 19 prBAS EN IEC 62386-105:2021 EN IEC 62386-105:2020, IDT; Digital addressable lighting interface - pr en,fr 29.140.99, 10.99 IEC 62386-105:2020, IDT Part 105: Particular requirements for 29.140.50 control gear and control devices - Firmware Transfer BAS/TC 19 prBAS EN IEC 62386- EN IEC 62386- Digital addressable lighting interface - pr en,fr 29.140.99 10.99 332/Cor1:2021 332:2018/AC:2019-12, IDT; IEC Part 332: Particular requirements - Input 62386-332:2017/COR1:2019, devices - Feedback IDT BAS/TC 19 prBAS EN IEC 62561- EN IEC 62561-2:2018/AC:2019- Lightning protection system components pr en,fr 29.020, 10.99 2/Cor1:2021 09, IDT; IEC 62561- (LPSC) - Part 2: Requirements for 91.120.40 2:2018/COR1:2019, IDT conductors and earth electrodes
BAS/TC 19 prBAS EN IEC 62858:2021 EN IEC 62858:2019, IDT; IEC Lightning density based on lightning pr en,fr 29.020, 10.99 62858:2019, IDT location systems (LLS) - General 91.120.40 principles BAS/TC 19 prBAS EN IEC 63013:2021 EN IEC 63013:2019, IDT; IEC LED packages - Long-term luminous pr en,fr 29.140.99 10.99 63013:2017, IDT and radiant flux maintenance projection
122 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 19 prBAS EN IEC 63044-5-1:2021 EN IEC 63044-5-1:2019, IDT; Home and Building Electronic Systems pr en,fr 29.120.01, 10.99 IEC 63044-5-1:2017, IDT (HBES) and Building Automation and 29.120.99 Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up BAS/TC 19 prBAS EN IEC 63044-5-2:2021 EN IEC 63044-5-2:2019, IDT; Home and Building Electronic Systems pr en,fr 29.120.01, 10.99 IEC 63044-5-2:2017, IDT (HBES) and Building Automation and 29.100.99 Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light- industrial environments
BAS/TC 19 prBAS EN IEC 63044-5-3:2021 EN IEC 63044-5-3:2019, IDT; Home and Building Electronic Systems pr en,fr 29.120.01, 10.99 IEC 63044-5-3:2017, IDT (HBES) and Building Automation and 29.120.99 Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments
BAS/TC 19 prBAS EN IEC 63103:2021 EN IEC 63103:2020, IDT; IEC Lighting equipment - Non-active mode pr en 29.140.99, 10.99 63103:2020, IDT power measurement 29.140.01 BAS/TC 19 prBAS EN IEC 63129:2021 EN IEC 63129:2020, IDT; IEC Determination of inrush current pr en,fr 29.140.99, 10.99 63129:2020, IDT characteristics of lighting products 29.140.01 BAS/TC 19 prBAS ISO 23539:2021 ISO 23539:2005, IDT Photometry - The CIE system of pv bs,en 17.180.01 10.99 physical photometry BAS/TC 19 prBAS ISO/CIE 19476:2021 ISO/CIE 19476:2014, IDT Characterization of the performance of pv bs,en 17.180.20 10.99 illuminance meters and luminance meters BAS/TC 21 prBAS EN 12350-1:2020 EN 12350-1:2019, IDT Testing fresh concrete - Part 1: pv bs 91.100.30 20.20 Sampling and common apparatus BAS/TC 21 prBAS EN 12350-2:2020 EN 12350-2:2019, IDT Testing fresh concrete - Part 2: Slump pv bs 91.100.30 20.20 test BAS/TC 21 prBAS EN 12350-5:2020 EN 12350-5:2019, IDT Testing fresh concrete - Part 5: Flow pv bs 91.100.30 20.20 table test BAS/TC 21 prBAS EN 12350-7:2020 EN 12350-7:2019, IDT Testing fresh concrete - Part 7: Air pv bs 91.100.30 20.20 content - Pressure methods BAS/TC 21 prBAS EN 17293:2021 EN 17293:2020, IDT Temporary works equipment - Execution pr en 91.220 10.99 - Requirements for manufacturing
123 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 21 prBAS EN 13373:2021 EN 13373:2020, IDT Natural stone test methods - pr en 91.100.15 10.99 Determination of geometric characteristics on units BAS/TC 21 prBAS EN 1015-11:2021 EN 1015-11:2019, IDT Methods of test for mortar for masonry - pr en 91.100.30, 10.99 Part 11: Determination of flexural and 91.100.15 compressive strength of hardened mortar BAS/TC 21 prBAS EN ISO 23386:2021 EN ISO 23386:2020, IDT; ISO Building information modelling and other pr en 35.240.67 10.99 23386:2020, IDT digital processes used in construction - Methodology to describe, author and maintain properties in interconnected data dictionaries
BAS/TC 21 prBAS EN ISO 23387:2021 EN ISO 23387:2020, IDT; ISO Building information modelling (BIM) - pr en 35.240.67, 10.99 23387:2020, IDT Data templates for construction objects 91.010.01 used in the life cycle of built assets - Concepts and principles BAS/TC 21 prBAS EN 12390-12:2021 EN 12390-12:2020, IDT Testing hardened concrete - Part 12: pr en 91.100.30 10.99 Determination of the carbonation resistance of concrete - Accelerated carbonation method BAS/TC 21 prBAS EN ISO 21597-1:2021 EN ISO 21597-1:2020, IDT; ISO Information container for linked pr en 35.240.67, 10.99 21597-1:2020, IDT document delivery - Exchange 91.010.01 specification - Part 1: Container BAS/TC 21 prBAS EN ISO 19650-5:2021 EN ISO 19650-5:2020, IDT; ISO Organization and digitization of pr en 35.240.67, 10.99 19650-5:2020, IDT information about buildings and civil 91.010.01 engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 5: Security- minded approach to information management BAS/TC 21 prBAS EN 1097-8:2021 EN 1097-8:2020, IDT Tests for mechanical and physical pr en 91.100.15 10.99 properties of aggregates - Part 8: Determination of the polished stone value
124 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 21 prBAS EN 1097-2:2021 EN 1097-2:2020, IDT Tests for mechanical and physical pr en 91.100.15 10.99 properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation BAS/TC 21 prBAS EN 933-2:2021 EN 933-2:2020, IDT Tests for geometrical properties of pr en 91.100.15 10.99 aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures BAS/TC 21 prBAS EN 1745:2021 EN 1745:2020, IDT Masonry and masonry products - pr en 91.120.10, 10.99 Methods for determining thermal 91.080.30 properties BAS/TC 21 prBAS EN ISO 19650-3:2021 EN ISO 19650-3:2020, IDT; ISO Organization and digitization of pr en 35.240.67, 10.99 19650-3:2020, IDT information about buildings and civil 93.010, engineering works, including building 91.010.01 information modelling (BIM) - Information management using building information modelling - Part 3: Operational phase of the assets BAS/TC 21 prBAS EN 15388:2021 EN 15388:2020, IDT Agglomerated stone - Slabs and cut-to- pr en 91.100.15 10.99 size products for vanity and kitchen tops
BAS/TC 21 prBAS EN 12370:2021 EN 12370:2020, IDT Natural stone test methods - pr en 91.100.15, 10.99 Determination of resistance to salt 73.020 crystallisation BAS/TC 21 prBAS EN ISO 16739-1:2021 EN ISO 16739-1:2020, IDT; ISO Industry Foundation Classes (IFC) for pr en 25.040.40 10.99 16739-1:2018, IDT data sharing in the construction and facility management industries - Part 1: Data schema BAS/TC 21 prBAS EN ISO 12006-2:2021 EN ISO 12006-2:2020, IDT; ISO Building construction - Organization of pr en 91.010.01 10.99 12006-2:2015, IDT information about construction works - Part 2: Framework for classification BAS/TC 21 prBAS EN 15804+A2:2021 EN 15804:2012+A2:2019, IDT Sustainability of construction works - pr en 91.010.99 10.99 Environmental product declarations - Core rules for the product category of construction products
125 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 21 prBAS ISO 21678:2021 ISO 21678:2020, IDT Sustainability in buildings and civil ko en 91.040.01 10.99 engineering works - Indicators and benchmarks - Principles, requirements and guidelines BAS/TC 21 prBAS ISO 21723:2021 ISO 21723:2019, IDT Buildings and civil engineering works - ko en 91.010.30 10.99 Modular coordination - Module BAS/TC 21 prBAS ISO 10406-3:2021 ISO 10406-3:2019, IDT Fibre-reinforced polymer (FRP) ko en 83.120, 10.99 reinforcement of concrete - Test 91.100.30 methods - Part 3: CFRP strips BAS/TC 21 prBAS ISO 21914:2021 ISO 21914:2019, IDT Test methods for fibre-reinforced ko en 83.120, 10.99 cementitious composites - Bending 91.100.30 moment - Curvature curve by four-point bending test BAS/TC 21 prBAS ISO 1920-3:2021 ISO 1920-3:2019, IDT Testing of concrete - Part 3: Making and ko en 91.100.30 10.99 curing test specimens BAS/TC 21 prBAS ISO 1920-4:2021 ISO 1920-4:2020, IDT Testing of concrete - Part 4: Strength of ko en 91.100.30 10.99 hardened concrete BAS/TC 21 prBAS ISO 1920-6:2021 ISO 1920-6:2019, IDT Testing of concrete - Part 6: Sampling, ko en 91.100.30 10.99 preparing and testing of concrete cores
BAS/TC 21 prBAS ISO 16938-1:2021 ISO 16938-1:2019, IDT Buildings and civil engineering works - ko en 91.100.50 10.99 Determination of the staining of porous substrates by sealants used in joints - Part 1: Test with compression BAS/TC 21 prBAS ISO 1920-14:2021 ISO 1920-14:2019, IDT Testing of concrete - Part 14: Setting ko en 91.100.30 10.99 time of concrete mixtures by resistance to penetration BAS/TC 21 prBAS ISO 20290-4:2021 ISO 20290-4:2019, IDT Aggregates for concrete - Test methods ko en 91.100.30 10.99 for mechanical and physical properties - Part 4: Determination of ten percent fines value (TFV) BAS/TC 21 prBAS ISO 22904:2021 ISO 22904:2020, IDT Additions for concrete ko en 91.100.30 10.99 BAS/TC 21 prBAS ISO 7078:2021 ISO 7078:2020, IDT Buildings and civil engineering works - ko en 91.200, 10.99 Procedures for setting out, 01.040.91 measurement and surveying - Vocabulary
126 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 21 prBAS ISO 23658:2021 ISO 23658:2020, IDT Buildings and civil engineering works - ko en 91.100.50 10.99 Sealants - Testing of adhesion properties using a bead peel test BAS/TC 21 prBAS ISO 6707-1:2021 ISO 6707-1:2020, IDT Buildings and civil engineering works - ko en 93.010, 10.99 Vocabulary - Part 1: General terms 01.040.93, 91.010.01, 01.040.91 BAS/TC 21 prBAS ISO 14484:2021 ISO 14484:2020, IDT Performance guidelines for design of ko en 83.120, 10.99 concrete structures using fibre- 91.100.30, reinforced polymer (FRP) materials 91.080.40 BAS/TC 21 prBAS ISO 18408:2021 ISO 18408:2019, IDT Simplified structural design for ko en 91.080.40 10.99 reinforced concrete wall buildings BAS/TC 21 prBAS ISO 20290-2:2021 ISO 20290-2:2019, IDT Aggregates for concrete - Test methods ko en 91.100.30 10.99 for mechanical and physical properties - Part 2: Method for determination of resistance to fragmentation by Los Angeles Test (LA-Test)
BAS/TC 21 prBAS ISO 20290-3:2021 ISO 20290-3:2019, IDT Aggregates for concrete - Test methods ko en 91.100.30 10.99 for mechanical and physical properties - Part 3: Determination of aggregate crushing value (ACV) BAS/TC 21 prBAS ISO 10252:2021 ISO 10252:2020, IDT Bases for design of structures - ko en 91.080.01 10.99 Accidental actions BAS/TC 21 prBAS ISO 20887:2021 ISO 20887:2020, IDT Sustainability in buildings and civil ko en 91.040.01 10.99 engineering works - Design for disassembly and adaptability - Principles, requirements and guidance BAS/TC 21 prBAS ISO 20987:2021 ISO 20987:2019, IDT Simplified design for mechanical ko en 91.080.40 10.99 connections between precast concrete structural elements in buildings BAS/TC 21 prBAS ISO 21022:2021 ISO 21022:2018, IDT Test method for fibre-reinforced ko en 83.120, 10.99 cementitious composites - Load- 91.100.30 deflection curve using circular plates BAS/TC 21 prBAS ISO 15392:2021 ISO 15392:2019, IDT Sustainability in buildings and civil ko en 91.040.01 10.99 engineering works - General principles
127 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 21 prBAS ISO 13824:2021 ISO 13824:2020, IDT Bases for design of structures - General ko en 91.080.01 10.99 principles on risk assessment of systems involving structures BAS/TC 22 prBAS EN 1009-4:2021 EN 1009-4:2020, IDT Machines for mechanical processing of pr en 91.220, 10.99 minerals and similar solid materials - 73.120 Safety - Part 4: Specific requirements for screening machinery BAS/TC 22 prBAS EN 1009-5:2021 EN 1009-5:2020, IDT Machines for mechanical processing of pr en 91.220, 10.99 minerals and similar solid materials - 73.120 Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery BAS/TC 22 prBAS EN 1009-2:2021 EN 1009-2:2020, IDT Machines for mechanical processing of pr en 91.220, 10.99 minerals and similar solid materials - 73.120 Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment BAS/TC 22 prBAS EN 1009-3:2021 EN 1009-3:2020, IDT Machines for mechanical processing of pr en 91.220, 10.99 minerals and similar solid materials - 73.120 Safety - Part 3: Specific requirements for crushing and milling machinery BAS/TC 22 prBAS EN 1009-1:2021 EN 1009-1:2020, IDT Machines for mechanical processing of pr en 91.220, 10.99 minerals and similar solid materials - 73.120 Safety - Part 1: Common requirements for machinery and processing plants BAS/TC 22 prBAS EN ISO 5010:2021 EN ISO 5010:2019, IDT; ISO Earth-moving machinery - Wheeled pr en 53.100 10.99 5010:2019, IDT machines - Steering requirements BAS/TC 22 prBAS EN ISO 19432-1:2021 EN ISO 19432-1:2020, IDT; ISO Building construction machinery and pr en 91.220 10.99 19432-1:2020, IDT equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels BAS/TC 22 prBAS EN ISO 7096:2021 EN ISO 7096:2020, IDT; ISO Earth-moving machinery - Laboratory pr en 53.100, 10.99 7096:2020, IDT evaluation of operator seat vibration 13.160
128 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 22 prBAS EN ISO 19014-4:2021 EN ISO 19014-4:2020, IDT; ISO Earth-moving machinery - Functional pr en 53.100 10.99 19014-4:2020, IDT safety - Part 4: Design and evaluation of software and data transmission for safety-related parts of the control BAS/TC 22 prBAS EN 12697-22:2021 EN 12697-22:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 22: Wheel tracking BAS/TC 22 prBAS EN 12697-14:2021 EN 12697-14:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 14: Water content BAS/TC 22 prBAS EN 12697-39:2021 EN 12697-39:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 39: Binder content by ignition BAS/TC 22 prBAS EN 12697-21:2021 EN 12697-21:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 21: Indentation using plate specimens BAS/TC 22 prBAS EN 12697-28:2021 EN 12697-28:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 28: Preparation of samples for determining binder content, water content and grading BAS/TC 22 prBAS EN 12697-29:2021 EN 12697-29:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 29: Determination of the dimensions of a bituminous specimen BAS/TC 22 prBAS EN 12697-34:2021 EN 12697-34:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 34: Marshall test BAS/TC 22 prBAS EN 12697-20:2021 EN 12697-20:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 20: Indentation using cube or Marshall specimens BAS/TC 22 prBAS EN 12697-6:2021 EN 12697-6:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 6: Determination of bulk density of bituminous specimens BAS/TC 22 prBAS EN 12697-1:2021 EN 12697-1:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 1: Soluble binder content BAS/TC 22 prBAS EN 12697-45:2021 EN 12697-45:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test BAS/TC 22 prBAS EN 12697-46:2021 EN 12697-46:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 46: Low temperature cracking and properties by uniaxial tension tests BAS/TC 22 prBAS EN 12697-40:2021 EN 12697-40:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 40: In situ drainability
129 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 22 prBAS EN 12697-11:2021 EN 12697-11:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 11: Determination of the affinity between aggregate and bitumen BAS/TC 22 prBAS EN 12697-19:2021 EN 12697-19:2020, IDT Bituminous mixtures - Test methods - pr en 93.080.20 10.99 Part 19: Permeability of specimen BAS/TC 22 prBAS EN 12414:2021 EN 12414:2020, IDT Vehicle parking control equipment - pr en 39.040.99 10.99 Requirements and test methods for a parking terminal BAS/TC 22 prBAS EN 16303:2021 EN 16303:2020, IDT Road restraint systems - Validation and pr en 93.080.30, 10.99 verification process for the use of virtual 13.200 testing in crash testing against vehicle restraint system BAS/TC 22 prBAS EN 1794-2:2021 EN 1794-2:2020, IDT Road traffic noise reducing devices - pr en 93.080.30 10.99 Non-acoustic performance - Part 2: General safety and environmental requirements BAS/TC 22 prBAS EN 13422:2021 EN 13422:2019, IDT Vertical road signs - Portable pr en 93.080.30 10.99 deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders BAS/TC 22 prBAS EN 17326:2021 EN 17326:2020, IDT Surfaces for sports areas - pr en 97.220.10 10.99 Determination of dimensional stability of shock pads used within sports systems
BAS/TC 22 prBAS EN 1569:2021 EN 1569:2020, IDT Surfaces for sports areas - pr en 97.220.10 10.99 Determination of the behaviour under a rolling load BAS/TC 22 prBAS EN 1517:2021 EN 1517:2020, IDT Surfaces for sports areas - pr en 97.220.10 10.99 Determination of resistance to impact BAS/TC 22 prBAS EN 17324:2021 EN 17324:2020, IDT Surfaces for sports areas - Test method pr en 97.220.10 10.99 for the determination of the resistance to dynamic fatigue of shock pads and sports surfaces BAS/TC 22 prBAS EN 17409:2021 EN 17409:2020, IDT Surfaces for sports areas - Code of pr en 97.220.10 10.99 practice for the sampling of performance infills used within synthetic turf surfaces
130 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 22 prBAS EN 17323:2021 EN 17323:2020, IDT Geosynthetics - Determination of tensile pr en 59.080.70 10.99 properties of Polymeric Geosynthetic Barriers BAS/TC 22 prBAS EN ISO 12956:2021 EN ISO 12956:2020, IDT; ISO Geotextiles and geotextile-related pr en 59.080.70 10.99 12956:2019, IDT products - Determination of the characteristic opening size BAS/TC 22 prBAS EN ISO 13426-1:2021 EN ISO 13426-1:2019, IDT; ISO Geotextiles and geotextile-related pr en 59.080.70 10.99 13426-1:2019, IDT products - Strength of internal structural junctions - Part 1: Geocells BAS/TC 22 prBAS EN ISO 10722:2021 EN ISO 10722:2019, IDT; ISO Geosynthetics - Index test procedure for pr en 59.080.70 10.99 10722:2019, IDT the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) BAS/TC 22 prBAS EN ISO 12960:2021 EN ISO 12960:2020, IDT; ISO Geotextiles and geotextile-related pr en 59.080.70 10.99 12960:2020, IDT products - Screening test methods for determining the resistance to acid and alkaline liquids BAS/TC 22 prBAS EN ISO 9863-1/A1:2021 EN ISO 9863-1:2016/A1:2019, Geosynthetics - Determination of pr en 59.080.70 10.99 IDT; ISO 9863-1:2016/Amd thickness at specified pressures - Part 1:2019, IDT 1: Single layers - Amendment 1 BAS/TC 22 prBAS EN ISO 22476-14:2021 EN ISO 22476-14:2020, IDT; ISO Geotechnical investigation and testing - pr en 93.020 10.99 22476-14:2020, IDT Field testing - Part 14: Borehole dynamic probing BAS/TC 22 prBAS EN ISO 18674-4:2021 EN ISO 18674-4:2020, IDT; ISO Geotechnical investigation and testing - pr en 93.020, 10.99 18674-4:2020, IDT Geotechnical monitoring by field 13.080.20 instrumentation - Part 4: Measurement of pore water pressure: Piezometers BAS/TC 22 prBAS EN ISO 18674-5:2021 EN ISO 18674-5:2019, IDT; ISO Geotechnical investigation and testing - pr en 93.020, 10.99 18674-5:2019, IDT Geotechnical monitoring by field 13.080.20 instrumentation - Part 5: Stress change measurements by total pressure cells (TPC) BAS/TC 22 prBAS EN ISO 18674-3/A1:2021 EN ISO 18674-3:2017/A1:2020, Geotechnical investigation and testing - pr en 93.020, 10.99 IDT; ISO 18674-3:2017/Amd Geotechnical monitoring by field 13.080.20 1:2020, IDT instrumentation - Part 3: Measurement of displacements across a line: Inclinometers - Amendment 1
131 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 22 prBAS CEN/TS 17481:2021 CEN/TS 17481:2020, IDT Bitumen and bituminous binders - pr en 91.100.50, 10.99 Determination of salt content in bitumen - 75.140 Electrical conductivity method
BAS/TC 22 prBAS CEN/TS 17482:2021 CEN/TS 17482:2020, IDT Bitumen and bituminous binders - pr en 91.100.50, 10.99 Determination of acid number of 75.140 bitumen - Potentiometric method BAS/TC 22 prBAS CEN/TR 17499:2021 CEN/TR 17499:2020, IDT Bitumen and bituminous binders - pr en 91.100.50 10.99 Examples for CE Marking and Declaration of Performances (DoP) BAS/TC 22 prBAS ISO 24410:2021 ISO 24410:2020, IDT Earth-moving machinery - Coupling of ko en 53.100 10.99 attachments to skid steer loaders BAS/TC 22 prBAS ISO 10968:2021 ISO 10968:2020, IDT Earth-moving machinery - Operator's ko en 53.100 10.99 controls BAS/TC 22 prBAS ISO/TR 18228-1:2021 ISO/TR 18228-1:2020, IDT Design using geosynthetics - Part 1: ko en 59.080.70 10.99 General BAS/TC 22 prBAS ISO/TR 19948:2021 ISO/TR 19948:2016, IDT Earth-moving machinery - Conformity ko en 53.100, 10.99 assessment and certification process 03.120.20 BAS/TC 23 prBAS ISO 21631:2021 ISO 21631:2020, IDT Essential oil of clementine (Citrus ko en 71.100.60 10.99 clementina hort. ex Tanaka syn. Citrus reticulata Blanco x Citrus sinensis (L.) Osbeck), Spanish type BAS/TC 23 prBAS ISO 3475:2021 ISO 3475:2020, IDT Essential oil of aniseed (Pimpinella ko en 65.020.20, 10.99 anisum L.) 71.100.60, 67.200.20 BAS/TC 23 prBAS ISO 3044:2021 ISO 3044:2020, IDT Essential oil of Corymbia citriodora ko en 71.100.60 10.99 (Hook.) K.D. Hill and L.A.S. Johnson (syn. Eucalyptus citriodora Hook.) BAS/TC 24 psBAS EN 12679:2020 EN 12679:2018, IDT Non-destructive testing - Radiographic pr en 19.100 50.00 testing - Determination of the size of industrial radiographic gamma sources BAS/TC 24 psBAS EN ISO 20769-1:2020 EN ISO 20769-1:2018, IDT; ISO Non-destructive testing - Radiographic pr en 19.100 50.00 20769-1:2018, IDT inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1: Tangential radiographic inspection
132 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 24 psBAS EN ISO 20769-2:2020 EN ISO 20769-2:2018, IDT; ISO Non-destructive testing - Radiographic pr en 19.100 50.00 20769-2:2018, IDT inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection BAS/TC 24 psBAS CEN ISO/TS 25108:2020 CEN ISO/TS 25108:2018, IDT; Non-destructive testing - NDT personnel pr en 19.100 50.00 ISO/TS 25108:2018, IDT training organizations BAS/TC 24 psBAS EN ISO 12718:2020 EN ISO 12718:2019, IDT; ISO Non-destructive testing - Eddy current pr en 19.100 50.00 12718:2019, IDT testing - Vocabulary BAS/TC 24 psBAS EN ISO 15549:2020 EN ISO 15549:2019, IDT; ISO Non-destructive testing - Eddy current pr en 19.100 50.00 15549:2019, IDT testing - General principles BAS/TC 24 psBAS EN ISO 15708-2:2020 EN ISO 15708-2:2019, IDT; ISO Non-destructive testing - Radiation pr en 19.100 50.00 15708-2:2017, IDT methods for Computed tomography - Part 2: Principles, equipment and samples BAS/TC 24 psBAS EN ISO 15708-1:2020 EN ISO 15708-1:2019, IDT; ISO Non-destructive testing - Radiation pr en 19.100 50.00 15708-1:2017, IDT methods for computed tomography - Part 1: Terminology BAS/TC 24 psBAS EN ISO 15708-3:2020 EN ISO 15708-3:2019, IDT; ISO Non-destructive testing - Radiation pr en 19.100 50.00 15708-3:2017, IDT methods for computed tomography - Part 3: Operation and interpretation BAS/TC 24 psBAS EN ISO 15708-4:2020 EN ISO 15708-4:2019, IDT; ISO Non-destructive testing - Radiation pr en 19.100 50.00 15708-4:2017, IDT methods for computed tomography - Part 4: Qualification BAS/TC 24 psBAS EN ISO 16809:2020 EN ISO 16809:2019, IDT; ISO Non-destructive testing - Ultrasonic pr en 19.100 50.00 16809:2017, IDT thickness measurement BAS/TC 24 psBAS ISO 16836:2020 ISO 16836:2019, IDT Non-destructive testing - Acoustic ko en 19.100 50.00 emission testing - Measurement method for acoustic emission signals in concrete
BAS/TC 24 psBAS ISO 16837:2020 ISO 16837:2019, IDT Non-destructive testing - Acoustic ko en 19.100 50.00 emission testing - Test method for damage qualification of reinforced concrete beams BAS/TC 24 psBAS ISO 16838:2020 ISO 16838:2019, IDT Non-destructive testing - Acoustic ko en 19.100 50.00 emission testing - Test method for classification of active cracks in concrete structures
133 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 24 psBAS EN ISO 9712:2020 EN ISO 9712:2012, IDT; ISO Non-destructive testing - Qualification pv bs,en 19.100 50.99 9712:2012, IDT and certification of NDT personnel BAS/TC 24 prBAS CEN ISO/TS 25107:2021 CEN ISO/TS 25107:2019, IDT; Non-destructive testing - NDT training pr en 19.100 10.99 ISO/TS 25107:2019, IDT syllabuses BAS/TC 24 prBAS EN ISO 22232-1:2021 EN ISO 22232-1:2020, IDT; ISO Non-destructive testing - pr en 19.100 10.99 22232-1:2020, IDT Characterization and verification of ultrasonic test equipment - Part 1: Instruments BAS/TC 24 prBAS EN ISO 16526-2:2021 EN ISO 16526-2:2020, IDT; ISO Non-destructive testing - Measurement pr en 19.100 10.99 16526-2:2011, IDT and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method BAS/TC 24 prBAS EN ISO 14096-1:2021 EN ISO 14096-1:2020, IDT; ISO Non-destructive testing - Qualification of pr en 19.100 10.99 14096-1:2005, IDT radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control BAS/TC 24 prBAS EN ISO 16526-1:2021 EN ISO 16526-1:2020, IDT; ISO Non-destructive testing - Measurement pr en 19.100 10.99 16526-1:2011, IDT and evaluation of the X-ray tube voltage - Part 1: Voltage divider method BAS/TC 24 prBAS EN ISO 14096-2:2021 EN ISO 14096-2:2020, IDT; ISO Non-destructive testing - Qualification of pr en 19.100 10.99 14096-2:2005, IDT radiographic film digitisation systems - Part 2: Minimum requirements
BAS/TC 24 prBAS EN ISO 16526-3:2021 EN ISO 16526-3:2020, IDT; ISO Non-destructive testing - Measurement pr en 19.100 10.99 16526-3:2011, IDT and evaluation of the X-ray tube voltage - Part 3: Spectrometric method BAS/TC 24 prBAS EN ISO 22232-3:2021 EN ISO 22232-3:2020, IDT; ISO Non-destructive testing - pr en 19.100 10.99 22232-3:2020, IDT Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment BAS/TC 24 prBAS EN ISO 22232-2:2021 EN ISO 22232-2:2020, IDT; ISO Non-destructive testing - pr en 19.100 10.99 22232-2:2020, IDT Characterization and verification of ultrasonic test equipment - Part 2: Probes BAS/TC 24 prBAS EN ISO 23243:2021 EN ISO 23243:2020, IDT; ISO Non-destructive testing - Ultrasonic pr en 19.100 10.99 23243:2020, IDT testing with arrays - Vocabulary
134 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 24 prBAS EN ISO 21432:2021 EN ISO 21432:2020, IDT; ISO Non-destructive testing - Standard test pr en 19.100 10.99 21432:2019, IDT method for determining residual stresses by neutron diffraction BAS/TC 25 prBAS EN ISO 81060-2:2021 EN ISO 81060-2:2019, IDT; ISO Non-invasive sphygmomanometers - pr en 11.040.10 10.99 81060-2:2018, IDT Part 2: Clinical investigation of intermittent automated measurement type BAS/TC 25 prBAS EN ISO 81060-2/A1:2021 EN ISO 81060-2:2019/A1:2020, Non-invasive sphygmomanometers - pr en 11.040.10 10.99 IDT; ISO 81060-2:2018/Amd Part 2: Clinical investigation of 1:2020, IDT intermittent automated measurement type - Amendment 1 BAS/TC 25 prBAS EN ISO 23325:2021 EN ISO 23325:2020, IDT; ISO Dentistry - Corrosion resistance of pr en 11.060.10 10.99 23325:2020, IDT dental amalgam BAS/TC 25 prBAS EN ISO 22570:2021 EN ISO 22570:2020, IDT; ISO Dentistry - Spoons and bone curettes pr en 11.060.20 10.99 22570:2020, IDT BAS/TC 25 prBAS EN ISO 22569:2021 EN ISO 22569:2020, IDT; ISO Dentistry - Multifunction handpieces pr en 11.060.25 10.99 22569:2020, IDT BAS/TC 25 prBAS EN ISO 9693:2021 EN ISO 9693:2019, IDT; ISO Dentistry - Compatibility testing for metal- pr en 11.060.10 10.99 9693:2019, IDT ceramic and ceramic-ceramic systems
BAS/TC 25 prBAS EN ISO 21850-1:2021 EN ISO 21850-1:2020, IDT; ISO Dentistry - Materials for dental pr en 11.060.20 10.99 21850-1:2020, IDT instruments - Part 1: Stainless steel BAS/TC 25 prBAS EN ISO 22052:2021 EN ISO 22052:2020, IDT; ISO Dentistry - Central compressed air pr en 11.060.20 10.99 22052:2020, IDT source equipment BAS/TC 25 prBAS EN ISO 9997:2021 EN ISO 9997:2020, IDT; ISO Dentistry - Cartridge syringes pr en 11.060.20, 10.99 9997:2020, IDT 11.040.20, 11.040.25 BAS/TC 25 prBAS EN ISO 7787-2:2021 EN ISO 7787-2:2020, IDT; ISO Dentistry - Laboratory cutters - Part 2: pr en 11.060.20 10.99 7787-2:2020, IDT Carbide laboratory cutters BAS/TC 25 prBAS EN ISO 15098:2021 EN ISO 15098:2020, IDT; ISO Dentistry - Dental tweezers pr en 11.060.20, 10.99 15098:2020, IDT 11.060.25 BAS/TC 25 prBAS EN ISO 13017:2021 EN ISO 13017:2020, IDT; ISO Dentistry - Magnetic attachments pr en 11.060.10 10.99 13017:2020, IDT BAS/TC 25 prBAS EN ISO 28399:2021 EN ISO 28399:2020, IDT; ISO Dentistry - External tooth bleaching pr en 97.170, 10.99 28399:2020, IDT products 71.100.70 BAS/TC 25 prBAS EN ISO 11553-1:2021 EN ISO 11553-1:2020, IDT; ISO Safety of machinery - Laser processing pr en 13.110, 10.99 11553-1:2020, IDT machines - Part 1: Laser safety 31.260 requirements
135 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 25 prBAS EN ISO 11551:2021 EN ISO 11551:2019, IDT; ISO Optics and photonics - Lasers and laser- pr en 31.260 10.99 11551:2019, IDT related equipment - Test method for absorptance of optical laser components BAS/TC 25 prBAS EN ISO 15902:2021 EN ISO 15902:2020, IDT; ISO Optics and photonics - Diffractive optics - pr en 01.040.31, 10.99 15902:2019, IDT Vocabulary 31.260 BAS/TC 25 prBAS EN ISO 20776-1:2021 EN ISO 20776-1:2020, IDT; ISO Susceptibility testing of infectious agents pr en 11.100.20, 10.99 20776-1:2019, IDT and evaluation of performance of 11.100 antimicrobial susceptibility test devices - Part 1: Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against rapidly growing aerobic bacteria involved in infectious diseases BAS/TC 25 prBAS CEN/TS 17390-1:2021 CEN/TS 17390-1:2020, IDT Molecular in vitro diagnostic pr en 11.100.10 10.99 examinations - Specifications for pre- examination processes for circulating tumor cells (CTCs) in venous whole blood - Part 1: Isolated RNA BAS/TC 25 prBAS CEN/TS 17390-3:2021 CEN/TS 17390-3:2020, IDT Molecular in vitro diagnostic pr en 11.100.10 10.99 examinations - Specifications for pre- examination processes for circulating tumor cells (CTCs) in venous whole blood - Part 3: Preparations for analytical CTC staining BAS/TC 25 prBAS CEN/TS 17390-2:2021 CEN/TS 17390-2:2020, IDT Molecular in vitro diagnostic pr en 11.100.10 10.99 examinations - Specifications for pre- examination processes for circulating tumor cells (CTCs) in venous whole blood - Part 2: Isolated DNA BAS/TC 25 prBAS EN ISO 8624:2021 EN ISO 8624:2020, IDT; ISO Ophthalmic optics - Spectacle frames - pr en 11.040.70, 10.99 8624:2020, IDT Measuring system and vocabulary 01.040.11 BAS/TC 25 prBAS EN ISO 8596/A1:2021 EN ISO 8596:2018/A1:2020, IDT; Ophthalmic optics - Visual acuity testing - pr en 11.040.70 10.99 ISO 8596:2017/Amd 1:2019, IDT Standard and clinical optotypes and their presentation - Amendment 1
136 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 25 prBAS EN ISO 24157/A1:2021 EN ISO 24157:2008/A1:2020, Ophthalmic optics and instruments - pr en 11.040.70 10.99 IDT; ISO 24157:2008/Amd Reporting aberrations of the human eye - 1:2020, IDT Amendment 1 BAS/TC 25 prBAS EN ISO 11737-2:2021 EN ISO 11737-2:2020, IDT; ISO Sterilization of health care products - pr en 11.080.01, 10.99 11737-2:2019, IDT Microbiological methods - Part 2: Tests 07.100.10 of sterility performed in the definition, validation and maintenance of a sterilization process BAS/TC 25 prBAS EN ISO 11135/A1:2021 EN ISO 11135:2014/A1:2019, Sterilization of health-care products - pr en 11.080.20, 10.99 IDT; ISO 11135:2014/Amd Ethylene oxide - Requirements for the 11.080.01 1:2018, IDT development, validation and routine control of a sterilization process for medical devices - Amendment 1: Revision of Annex E, Single batch release BAS/TC 25 prBAS EN ISO 20695:2021 EN ISO 20695:2020, IDT; ISO Enteral feeding systems - Design and pr en 11.040.20, 10.99 20695:2020, IDT testing 11.040.25 BAS/TC 25 prBAS EN ISO 8637-1:2021 EN ISO 8637-1:2020, IDT; ISO Extracorporeal systems for blood pr en 11.040.20, 10.99 8637-1:2017, IDT purification - Part 1: Haemodialysers, 11.040.40 haemodiafilters, haemofilters and haemoconcentrators BAS/TC 25 prBAS EN ISO 8536-4:2021 EN ISO 8536-4:2020, IDT; ISO Infusion equipment for medical use - pr en 11.040.20 10.99 8536-4:2019, IDT Part 4: Infusion sets for single use, gravity feed BAS/TC 25 prBAS EN ISO 7199/A1:2021 EN ISO 7199:2017/A1:2020, IDT; Cardiovascular implants and artificial pr en 11.040.40 10.99 ISO 7199:2016/Amd 1:2020, IDT organs - Blood-gas exchangers (oxygenators) - Amendment 1: Connectors BAS/TC 25 prBAS EN ISO 80601-2- EN ISO 80601-2- Medical electrical equipment - Part 2-56: pr en 17.200.20, 10.99 56/A1:2021 56:2017/A1:2020, IDT; ISO Particular requirements for basic safety 11.040.55 80601-2-56:2017/Amd 1:2018, and essential performance of clinical IDT thermometers for body temperature measurement - Amendment 1
BAS/TC 25 prBAS EN 455-1:2021 EN 455-1:2020, IDT Medical gloves for single use - Part 1: pr en 11.140 10.99 Requirements and testing for freedom from holes
137 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 25 prBAS EN ISO 7886-2:2021 EN ISO 7886-2:2020, IDT; ISO Sterile hypodermic syringes for single pr en 11.040.25 10.99 7886-2:2020, IDT use - Part 2: Syringes for use with power- driven syringe pumps BAS/TC 25 prBAS EN ISO 8871-2:2021 EN ISO 8871-2:2020, IDT; ISO Elastomeric parts for parenterals and for pr en 11.040.20 10.99 8871-2:2020, IDT devices for pharmaceutical use - Part 2: Identification and characterization
BAS/TC 25 prBAS EN ISO 7886-3:2021 EN ISO 7886-3:2020, IDT; ISO Sterile hypodermic syringes for single pr en 11.040.25 10.99 7886-3:2020, IDT use - Part 3: Auto-disabled syringes for fixed-dose immunization BAS/TC 25 prBAS EN ISO 10993-18:2021 EN ISO 10993-18:2020, IDT; ISO Biological evaluation of medical devices - pr en 11.100.20 10.99 10993-18:2020, IDT Part 18: Chemical characterization of medical device materials within a risk management process
BAS/TC 25 prBAS EN ISO 14155:2021 EN ISO 14155:2020, IDT; ISO Clinical investigation of medical devices pr en 11.100.20 10.99 14155:2020, IDT for human subjects - Good clinical practice BAS/TC 25 prBAS EN ISO 80601-2- EN ISO 80601-2- Medical electrical equipment - Part 2-13: pr en 11.040.10 10.99 13/A2:2021 13:2012/A2:2019, IDT; ISO Particular requirements for basic safety 80601-2-13:2011/Amd 2:2018, and essential performance of an IDT anaesthetic workstation - Amendment 2 BAS/TC 25 prBAS EN ISO 80601-2-12:2021 EN ISO 80601-2-12:2020, IDT; Medical electrical equipment - Part 2-12: pr en 11.040.10 10.99 ISO 80601-2-12:2020, IDT Particular requirements for basic safety and essential performance of critical care ventilators BAS/TC 25 prBAS EN ISO 15002/A1:2021 EN ISO 15002:2008/A1:2019, Flow-metering devices for connection to pr en 17.120.10, 10.99 IDT; ISO 15002:2008/Amd terminal units of medical gas pipeline 11.040.10 1:2018, IDT systems - Amendment 1 BAS/TC 25 prBAS EN ISO 11197:2021 EN ISO 11197:2019, IDT; ISO Medical supply units pr en 11.040.10 10.99 11197:2019, IDT BAS/TC 25 prBAS EN ISO 80601-2- EN ISO 80601-2- Medical electrical equipment - Part 2-13: pr en 11.040.10 10.99 13/A1:2021 13:2012/A1:2019, IDT; ISO Particular requirements for basic safety 80601-2-13:2011/Amd 1:2015, and essential performance of an IDT anaesthetic workstation - Amendment 1
138 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 25 prBAS EN ISO 17510:2021 EN ISO 17510:2020, IDT; ISO Medical devices - Sleep apnoea pr en 11.040.10 10.99 17510:2015, IDT breathing therapy - Masks and application accessories BAS/TC 25 prBAS EN ISO 18562-1:2021 EN ISO 18562-1:2020, IDT; ISO Biocompatibility evaluation of breathing pr en 11.040.10 10.99 18562-1:2017, IDT gas pathways in healthcare applications - Part 1: Evaluation and testing within a risk management process
BAS/TC 25 prBAS EN ISO 18562-2:2021 EN ISO 18562-2:2020, IDT; ISO Biocompatibility evaluation of breathing pr en 11.040.10 10.99 18562-2:2017, IDT gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter BAS/TC 25 prBAS EN ISO 18562-4:2021 EN ISO 18562-4:2020, IDT; ISO Biocompatibility evaluation of breathing pr en 11.040.10 10.99 18562-4:2017, IDT gas pathways in healthcare applications - Part 4: Tests for leachables in condensate BAS/TC 25 prBAS EN ISO 80601-2-74:2021 EN ISO 80601-2-74:2020, IDT; Medical electrical equipment - Part 2-74: pr en 11.040.10 10.99 ISO 80601-2-74:2017, IDT Particular requirements for basic safety and essential performance of respiratory humidifying equipment BAS/TC 25 prBAS EN ISO 18562-3:2021 EN ISO 18562-3:2020, IDT; ISO Biocompatibility evaluation of breathing pr en 11.040.10 10.99 18562-3:2017, IDT gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic compounds (VOCs)
BAS/TC 25 prBAS EN 1789:2021 EN 1789:2020, IDT Medical vehicles and their equipment - pr en 43.160, 10.99 Road ambulances 11.160 BAS/TC 25 prBAS EN 13718-1+A1:2021 EN 13718-1:2014+A1:2020, IDT Medical vehicles and their equipment - pr en 11.040.01, 10.99 Air ambulances - Part 1: Requirements 49.020, for medical devices used in air 11.160 ambulances BAS/TC 25 prBAS EN 13718-2+A1:2021 EN 13718-2:2015+A1:2020, IDT Medical vehicles and their equipment - pr en 11.040.01, 10.99 Air ambulances - Part 2: Operational 49.020, and technical requirements for air 11.160 ambulances BAS/TC 25 prBAS CEN ISO/TS 80004- CEN ISO/TS 80004-11:2020, Nanotechnologies - Vocabulary - Part pr en 07.120, 10.99 11:2021 IDT; ISO/TS 80004-11:2017, IDT 11: Nanolayer, nanocoating, nanofilm, 07.030, and related terms 01.040.07
139 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 25 prBAS CEN ISO/TS 80004- CEN ISO/TS 80004-13:2020, Nanotechnologies - Vocabulary - Part pr en 07.120, 10.99 13:2021 IDT; ISO/TS 80004-13:2017, IDT 13: Graphene and related two- 01.040.07 dimensional (2D) materials BAS/TC 25 prBAS CEN ISO/TR 18401:2021 CEN ISO/TR 18401:2020, IDT; Nanotechnologies - Plain language pr en 07.120, 10.99 ISO/TR 18401:2017, IDT explanation of selected terms from the 07.030, ISO/IEC 80004 series 01.040.07 BAS/TC 25 prBAS EN ISO 14971:2021 EN ISO 14971:2019, IDT; ISO Medical devices - Application of risk pr en 11.040.01 10.99 14971:2019, IDT management to medical devices BAS/TC 25 prBAS CEN ISO/TR 20416:2021 CEN ISO/TR 20416:2020, IDT; Medical devices - Post-market pr en 11.040.01 10.99 ISO/TR 20416:2020, IDT surveillance for manufacturers BAS/TC 25 prBAS CEN ISO/TR 24971:2021 CEN ISO/TR 24971:2020, IDT; Medical devices - Guidance on the pr en 11.040.01 10.99 ISO/TR 24971:2020, IDT application of ISO 14971 BAS/TC 25 prBAS EN IEC 80601-2-26:2021 EN IEC 80601-2-26:2020, IDT; Medical electrical equipment - Part 2-26: pr en 11.040.99, 10.99 IEC 80601-2-26:2019, IDT Particular requirements for the basic 11.040.01, safety and essential performance of 11.040.55 electroencephalographs
BAS/TC 25 prBAS EN IEC 60601-2-31:2021 EN IEC 60601-2-31:2020, IDT; Medical electrical equipment - Part 2-31: pr en 11.040.01 10.99 IEC 60601-2-31:2020, IDT Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source
BAS/TC 25 prBAS EN IEC 80601-2-59:2021 EN IEC 80601-2-59:2019, IDT; Medical electrical equipment - Part 2-59: pr en 11.040.55 10.99 IEC 80601-2-59:2017, IDT Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
BAS/TC 25 prBAS EN IEC 60601-2-16:2021 EN IEC 60601-2-16:2019, IDT; Medical electrical equipment - Part 2-16: pr en 11.040.20, 10.99 IEC 60601-2-16:2018, IDT Particular requirements for the basic 11.040.25 safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
140 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 25 prBAS EN IEC 60601-2-39:2021 EN IEC 60601-2-39:2019, IDT; Medical electrical equipment - Part 2-39: pr en 11.040.99 10.99 IEC 60601-2-39:2018, IDT Particular requirements for basic safety and essential performance of peritoneal dialysis equipment BAS/TC 25 prBAS EN IEC 62985:2021 EN IEC 62985:2019, IDT; IEC Methods for calculating size specific pr en 11.040.50 10.99 62985:2019, IDT dose estimates (SSDE) on computed tomography BAS/TC 25 prBAS EN IEC 61223-3-5:2021 EN IEC 61223-3-5:2019, IDT; Evaluation and routine testing in medical pr en 11.040.50 10.99 IEC 61223-3-5:2019, IDT imaging departments - Part 3-5: Acceptance and constancy tests - Imaging performance of computed tomography X-ray equipment BAS/TC 25 prBAS EN IEC 60601-2-76:2021 EN IEC 60601-2-76:2019, IDT; Medical electrical equipment - Part 2-76: pr en 11.040.50, 10.99 IEC 60601-2-76:2018, IDT Particular requirements for the basic 11.040 safety and essential performance of low energy ionized gas haemostasis equipment BAS/TC 25 prBAS EN IEC 60580:2021 EN IEC 60580:2020, IDT; IEC Medical electrical equipment - Dose pr en 11.040.50 10.99 60580:2019, IDT area product meters BAS/TC 25 prBAS EN IEC 60601-2-83:2021 EN IEC 60601-2-83:2020, IDT; Medical electrical equipment - Part 2-83: pr en 11.040.60, 10.99 IEC 60601-2-83:2019, IDT Particular requirements for the basic 17.140.50, safety and essential performance of 11.180.15 home light therapy equipment
BAS/TC 25 prBAS EN IEC 80601-2-78:2021 EN IEC 80601-2-78:2020, IDT; Medical electrical equipment - Part 2-78: pr en 11.040.01 10.99 IEC 80601-2-78:2019, IDT Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
BAS/TC 25 prBAS EN 60601-2-43/A2:2021 EN 60601-2-43:2010/A2:2020, Medical electrical equipment - Part 2-43: pr en 11.040.50, 10.99 IDT; IEC 60601-2- Particular requirements for the basic 37.040.25 43:2010/AMD2:2019, IDT safety and essential performance of X- ray equipment for interventional procedures
141 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 25 prBAS EN IEC 61223-3-6:2021 EN IEC 61223-3-6:2020, IDT; Evaluation and routine testing in medical pr en 11.040.50 10.99 IEC 61223-3-6:2020, IDT imaging departments - Part 3-6: Acceptance and constancy tests - Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation BAS/TC 25 prBAS EN IEC 62464-1:2021 EN IEC 62464-1:2019, IDT; IEC Magnetic resonance equipment for pr en 11.040.50 10.99 62464-1:2018, IDT medical imaging - Part 1: Determination of essential image quality parameters
BAS/TC 25 prBAS EN 62366-1/A1:2021 EN 62366-1:2015/A1:2020, IDT; Medical devices - Part 1: Application of pr en 11.040.01, 10.99 IEC 62366-1:2015/AMD1:2020, usability engineering to medical devices 11.040 IDT BAS/TC 25 prBAS EN IEC 63077:2021 EN IEC 63077:2019, IDT; IEC Good refurbishment practices for pr en 11.040.55 10.99 63077:2019, IDT medical imaging equipment BAS/TC 25 prBAS EN IEC 60601-2-20:2021 EN IEC 60601-2-20:2020, IDT; Medical electrical equipment - Part 2-20: pr en 11.040.10 10.99 IEC 60601-2-20:2020, IDT Particular requirements for the basic safety and essential performance of infant transport incubators
BAS/TC 25 prBAS EN 60601-1-9/A2:2021 EN 60601-1-9:2008/A2:2020, Medical electrical equipment - Part 1-9: pr en 13.020, 10.99 IDT; IEC 60601-1- General requirements for basic safety 11.040.01, 9:2007/AMD2:2020, IDT and essential performance - Collateral 13.020.01, Standard: Requirements for 11.040 environmentally conscious design BAS/TC 25 prBAS EN 60601-1-12/A1:2021 EN 60601-1-12:2015/A1:2020, Medical electrical equipment - Part 1-12: pr en 11.040.01, 10.99 IDT; IEC 60601-1- General requirements for basic safety 11.040 12:2014/AMD1:2020, IDT and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
142 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 25 prBAS EN 60601-2-40:2021 EN 60601-2-40:2019, IDT; IEC Medical electrical equipment - Part 2-40: pr en 11.040.99, 10.99 60601-2-40:2016, IDT Particular requirements for the basic 11.040.50, safety and essential performance of 11.040.20, electromyographs and evoked response 11.040.55 equipment BAS/TC 25 prBAS EN IEC 60601-2-28:2021 EN IEC 60601-2-28:2019, IDT; Medical electrical equipment - Part 2-28: pr en 11.040.55 10.99 IEC 60601-2-28:2017, IDT Particular requirements for the basic safety and essential performance of X- ray tube assemblies for medical diagnosis BAS/TC 25 prBAS EN 80601-2-58/A1:2021 EN 80601-2-58:2015/A1:2019, Medical electrical equipment - Part 2-58: pr en 11.040.70 10.99 IDT; IEC 80601-2- Particular requirements for the basic 58:2014/AMD1:2016, IDT safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
BAS/TC 25 prBAS EN IEC 60601-2-46:2021 EN IEC 60601-2-46:2019, IDT; Medical electrical equipment - Part 2-46: pr en 11.140 10.99 IEC 60601-2-46:2016, IDT Particular requirements for the basic safety and essential performance of operating tables BAS/TC 25 prBAS EN IEC 80601-2-60:2021 EN IEC 80601-2-60:2020, IDT; Medical electrical equipment - Part 2-60: pr en 11.040.01 10.99 IEC 80601-2-60:2019, IDT Particular requirements for the basic safety and essential performance of dental equipment BAS/TC 25 prBAS EN IEC 80601-2-30:2021 EN IEC 80601-2-30:2019, IDT; Medical electrical equipment - Part 2-30: pr en 11.040.01, 10.99 IEC 80601-2-30:2018, IDT Particular requirements for the basic 11.040 safety and essential performance of automated non-invasive sphygmomanometers BAS/TC 25 prBAS EN 60601-2-4/A1:2021 EN 60601-2-4:2011/A1:2019, Medical electrical equipment - Part 2-4: pr en 11.040.10 10.99 IDT; IEC 60601-2- Particular requirements for the basic 4:2010/AMD1:2018, IDT safety and essential performance of cardiac defibrillators BAS/TC 25 prBAS EN 60601-2-54/A2:2021 EN 60601-2-54:2009/A2:2019, Medical electrical equipment - Part 2-54: pr en 11.040.50 10.99 IDT; IEC 60601-2- Particular requirements for the basic 54:2009/AMD2:2018, IDT safety and essential performance of X- ray equipment for radiography and radioscopy
143 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 25 prBAS EN 60601-2-63/A1:2021 EN 60601-2-63:2015/A1:2019, Medical electrical equipment - Part 2-63: pr en 11.040.50 10.99 IDT; IEC 60601-2- Particular requirements for the basic 63:2012/AMD1:2017, IDT safety and essential performance of dental extra-oral X-ray equipment
BAS/TC 25 prBAS EN 60601-2-65/A1:2021 EN 60601-2-65:2013/A1:2020, Medical electrical equipment - Part 2-65: pr en 11.040.50, 10.99 IDT; IEC 60601-2- Particular requirements for the basic 11.040.55 65:2012/AMD1:2017, IDT safety and essential performance of dental intra-oral X-ray equipment
BAS/TC 25 prBAS EN IEC 60601-2-75:2021 EN IEC 60601-2-75:2019, IDT; Medical Electrical Equipment - Part 2- pr en 11.040.01 10.99 IEC 60601-2-75:2017, IDT 75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment
BAS/TC 25 prBAS EN IEC 80601-2-49:2021 EN IEC 80601-2-49:2019, IDT; Medical electrical equipment - Part 2-49: pr en 11.040.55 10.99 IEC 80601-2-49:2018, IDT Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment BAS/TC 25 prBAS EN IEC 60118-13:2021 EN IEC 60118-13:2020, IDT; IEC Electroacoustics - Hearing aids - Part pr en 33.100.20, 10.99 60118-13:2019, IDT 13: Requirements and methods of 17.140.50 measurement for electromagnetic immunity to mobile digital wireless devices BAS/TC 25 prBAS EN IEC 60601-2-66:2021 EN IEC 60601-2-66:2020, IDT; Medical electrical equipment - Part 2-66: pr en 17.140.50, 10.99 IEC 60601-2-66:2019, IDT Particular requirements for the basic 11.180.15 safety and essential performance of hearing aids and hearing aid systems
BAS/TC 25 prBAS EN IEC 60118-9:2021 EN IEC 60118-9:2019, IDT; IEC Electroacoustics - Hearing aids - Part 9: pr en 17.140.50 10.99 60118-9:2019, IDT Methods of measurement of the performance characteristics of bone conduction hearing aids BAS/TC 25 prBAS EN IEC 60263:2021 EN IEC 60263:2020, IDT; IEC Scales and sizes for plotting frequency pr en 17.140.50 10.99 60263:2020, IDT characteristics and polar diagrams
144 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 27 prBAS ISO 20360:2021 ISO 20360:2020, IDT Brown coals and lignites - Determination ko en 73.040 10.99 of the volatile matter in the analysis sample: one furnace method
BAS/TC 27 prBAS ISO 556:2021 ISO 556:2020, IDT Coke (greater than 20 mm in size) - ko en 75.160.10 10.99 Determination of mechanical strength BAS/TC 27 prBAS ISO 15585:2021 ISO 15585:2019, IDT Hard coal - Determination of caking ko en 73.040 10.99 index BAS/TC 27 prBAS ISO 349:2021 ISO 349:2020, IDT Hard coal - Audibert-Arnu dilatometer ko en 73.040 10.99 test BAS/TC 27 prBAS ISO 20904:2021 ISO 20904:2020, IDT Hard coal - Sampling of slurries ko en 73.040 10.99 BAS/TC 27 prBAS ISO 1213-1:2021 ISO 1213-1:2020, IDT Coal and coke - Vocabulary - Part 1: ko en 73.040, 10.99 Terms relating to coal preparation 01.040.73 BAS/TC 27 prBAS ISO 1170:2021 ISO 1170:2020, IDT Coal and coke - Calculation of analyses ko en 73.040, 10.99 to different bases 75.160.10 BAS/TC 27 prBAS ISO 20305:2021 ISO 20305:2020, IDT Mine closure and reclamation - ko en 73.020, 10.99 Vocabulary 01.040.73 BAS/TC 27 prBAS ISO/TS 21826:2021 ISO/TS 21826:2020, IDT Iron ores - Determination of total iron ko en 73.060.10 10.99 content - EDTA photometric titration method BAS/TC 27 prBAS ISO 3087:2021 ISO 3087:2020, IDT Iron ores - Determination of the moisture ko en 73.060.10 10.99 content of a lot BAS/TC 27 prBAS ISO/TS 20048-1:2021 ISO/TS 20048-1:2020, IDT Solid biofuels - Determination of off- ko en 75.160.40, 10.99 gassing and oxygen depletion 27.190 characteristics - Part 1: Laboratory method for the determination of off- gassing and oxygen depletion using closed containers BAS/TC 27 prBAS ISO/TR 23437:2021 ISO/TR 23437:2020, IDT Solid biofuels - Bridging behaviour of ko en 75.160.40, 10.99 bulk biofuels 27.190 BAS/TC 27 prBAS ISO 15661:2021 ISO 15661:2020, IDT Copper and nickel sulfide ores and ko en 73.060.99 10.99 concentrates - Determination of total chlorine content - Alkaline fusion and potentiometric titration method BAS/TC 27 prBAS EN ISO 20024:2021 EN ISO 20024:2020, IDT; ISO Solid biofuels - Safe handling and pr en 75.160.40, 10.99 20024:2020, IDT storage of solid biofuel pellets in 27.190 commercial and industrial applications
145 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 27 prBAS EN ISO 20049-1:2021 EN ISO 20049-1:2020, IDT; ISO Solid biofuels - Determination of self- pr en 75.160.40, 10.99 20049-1:2020, IDT heating of pelletized biofuels - Part 1: 27.190 Isothermal calorimetry BAS/TC 27 prBAS EN ISO 21404:2021 EN ISO 21404:2020, IDT; ISO Solid biofuels - Determination of ash pr en 75.160.40, 10.99 21404:2020, IDT melting behaviour 27.190 BAS/TC 27 prBAS EN ISO 21945:2021 EN ISO 21945:2020, IDT; ISO Solid biofuels - Simplified sampling pr en 75.160.40, 10.99 21945:2020, IDT method for small scale applications 27.190 BAS/TC 27 prBAS ISO 334:2021 ISO 334, IDT Coal and coke - Determination of total ko en 73.040, 10.99 sulfur - Eschka method 75.160.10 BAS/TC 29 prBAS EN 81-20:2019 EN 81-20:2020, IDT Safety rules for the construction and pv bs 91.140.90 10.99 installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts
BAS/TC 29 prBAS EN 81-50:2019 EN 81-50:2020, IDT Safety rules for the construction and pv bs 91.140.90 10.99 installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components BAS/TC 29 nsBAS EN 13001-3-4:2020 EN 13001-3-4:2018, IDT Cranes - General design - Part 3-4: pr en 21.100.01, 40.20 Limit states and proof of competence of 53.020.20 machinery - Bearings BAS/TC 29 nsBAS EN 17064:2020 EN 17064:2018, IDT Safety requirements for cableway pr en 45.100 40.20 installations designed to carry persons - Prevention and fight against fire BAS/TC 29 nsBAS EN ISO 20238:2020 EN ISO 20238:2019, IDT; ISO Conveyor belts - Drum friction testing pr en 53.040.20 40.20 20238:2018, IDT BAS/TC 29 nsBAS EN 81-21:2020 EN 81-21:2018, IDT Safety rules for the construction and pr en 91.140.90 40.20 installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing building BAS/TC 29 nsBAS EN ISO 21183-2:2020 EN ISO 21183-2:2018, IDT; ISO Light conveyor belts - Part 2: List of pr en 53.040.20, 40.20 21183-2:2018, IDT equivalent terms 01.040.53 BAS/TC 29 nsBAS EN 14492-2:2020 EN 14492-2:2019, IDT Cranes - Power driven winches and pr en 53.020.20 40.20 hoists - Part 2: Power driven hoists
146 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 29 nsBAS EN 81-80:2020 EN 81-80:2019, IDT Safety rules for the construction and pr en 91.140.90 40.20 installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts BAS/TC 29 nsBAS EN 81-77:2020 EN 81-77:2018, IDT Safety rules for the construction and pr en 91.140.90, 40.20 installations of lifts - Particular 91.120.25 applications for passenger and goods passenger lifts - Part 77: Lifts subject to seismic conditions BAS/TC 29 nsBAS EN 1709:2020 EN 1709:2019, IDT Safety requirements for cableway pr en 45.100 40.20 installations designed to transport persons - Precommissioning inspection and instructions for maintenance and operational inspection and checks
BAS/TC 29 nsBAS EN 12927:2020 EN 12927:2019, IDT Safety requirements for cableway pr en 45.100 40.20 installations designed to carry persons - Ropes BAS/TC 29 prBAS ISO 8100-30:2021 ISO 8100-30:2019, IDT Lifts for the transport of persons and ko en 91.140.90 10.99 goods - Part 30: Class I, II, III and VI lifts installation BAS/TC 29 prBAS EN 81-72:2021 EN 81-72:2020, IDT Safety rules for the construction and pr en 91.140.90 10.99 installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts
BAS/TC 29 prBAS EN 81-73:2021 EN 81-73:2020, IDT Safety rules for the construction and pr en 91.140.90, 10.99 installation of lifts - Particular 13.220.50 applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire BAS/TC 29 prBAS EN 12015:2021 EN 12015:2020, IDT Electromagnetic compatibility - Product pr en 91.140.90, 10.99 family standard for lifts, escalators and 33.100.10 moving walks - Emission
BAS/TC 29 prBAS EN ISO 21178:2021 EN ISO 21178:2020, IDT; ISO Light conveyor belts - Determination of pr en 53.040.10 10.99 21178:2020, IDT electrical resistances
147 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 29 prBAS CEN/TS 115-4:2021 CEN/TS 115-4:2020, IDT Safety of escalators and moving walks - pr en 91.140.90 10.99 Part 4: Interpretations related to EN 115 family of standards BAS/TC 30 prBAS EN 50305:2021 EN 50305:2020, IDT Railway applications - Railway rolling pr en 45.060.01, 10.99 stock cables having special fire 29.060.20 performance - Test methods BAS/TC 30 prBAS EN 50306-1:2021 EN 50306-1:2020, IDT Railway applications - Railway rolling pr en 13.220.40, 10.99 stock cables having special fire 45.060.01, performance - Thin wall - Part 1: 29.060.20 General requirements BAS/TC 30 prBAS EN 50306-2:2021 EN 50306-2:2020, IDT Railway applications - Railway rolling pr en 13.220.40, 10.99 stock cables having special fire 45.060.01, performance - Thin wall - Part 2: Single 29.060.20 core cables BAS/TC 30 prBAS EN 50306-3:2021 EN 50306-3:2020, IDT Railway applications - Railway rolling pr en 13.220.40, 10.99 stock cables having special fire 45.060.01, performance - Thin wall - Part 3: Single 29.060.20 core and multicore cables screened and thin wall sheathed BAS/TC 30 prBAS EN 50306-4:2021 EN 50306-4:2020, IDT Railway applications - Railway rolling pr en 13.220.40, 10.99 stock cables having special fire 45.060.01, performance - Thin wall - Part 4: 29.060.20 Multicore and multipair screened or not screened sheathed cables BAS/TC 30 prBAS EN 50341-1:2020 EN 50341-1:2012, IDT Overhead electrical lines exceeding AC pv sr,en 29.240.20 20.99 1 kV - Part 1: General requirements - Common specifications BAS/TC 30 prBAS EN 50341-2-1:2021 EN 50341-2-1:2020, IDT Overhead electrical lines exceeding AC pr en 29.240.20 10.99 1 kV - Part 2-1: National Normative Aspects (NNAs) for Austria (based on EN 50341-1:2012) BAS/TC 30 prBAS EN 60317-0-1/A1:2021 EN 60317-0-1:2014/A1:2019, Specifications for particular types of pr en,fr 29.060.10 10.99 IDT; IEC 60317-0- winding wires - Part 0-1: General 1:2013/AMD1:2019, IDT requirements - Enamelled round copper wire
148 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN 60317-0-3/A2:2021 EN 60317-0-3:2008/A2:2019, Specifications for particular types of pr en,fr 29.060.10 10.99 IDT; IEC 60317-0- winding wires - Part 0-3: General 3:2008/AMD2:2019, IDT requirements - Enamelled round aluminium wire BAS/TC 30 prBAS EN 60317-20/A1:2021 EN 60317-20:2014/A1:2019, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-20:2013/AMD1:2019, winding wires - Part 20: Solderable IDT polyurethane enamelled round copper wire, class 155 BAS/TC 30 prBAS EN 60317-21/A1:2021 EN 60317-21:2014/A1:2019, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-21:2013/AMD1:2019, winding wires - Part 21: Solderable IDT polyurethane enamelled round copper wire overcoated with polyamide, class 155 BAS/TC 30 prBAS EN 60317-23/A1:2021 EN 60317-23:2014/A1:2019, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-23:2013/AMD1:2019, winding wires - Part 23: Solderable IDT polyesterimide enamelled round copper wire, class 180 BAS/TC 30 prBAS EN 60669-1/Cor 2:2021 EN 60669-1:2018/AC:2020-02, Switches for household and similar fixed pr en,fr 29.120.40 10.99 IDT; IEC 60669- electrical installations - Part 1: General 1:2017/COR1:2020, IDT requirements BAS/TC 30 prBAS EN 60754-1/A1:2021 EN 60754-1:2014/A1:2020, IDT; Test on gases evolved during pr en,fr 29.020, 10.99 IEC 60754-1:2011/AMD1:2019, combustion of materials from cables - 13.220.40, IDT Part 1: Determination of the halogen 29.060.20 acid gas content BAS/TC 30 prBAS EN 60754-2/A1:2021 EN 60754-2:2014/A1:2020, IDT; Test on gases evolved during pr en,fr 29.020, 10.99 IEC 60754-2:2011/AMD1:2019, combustion of materials from cables - 13.220.40, IDT Part 2: Determination of acidity (by pH 29.060.20 measurement) and conductivity BAS/TC 30 prBAS EN 60851-3/A2:2021 EN 60851-3:2009/A2:2019, IDT; Winding wires - Test methods - Part 3: pr en,fr 29.060.10 10.99 IEC 60851-3:2009/AMD2:2019, Mechanical properties IDT BAS/TC 30 prBAS EN 60851-5/A2:2021 EN 60851-5:2008/A2:2019, IDT; Winding wires - Test methods - Part 5: pr en,fr 29.060.10 10.99 IEC 60851-5:2008/AMD2:2019, Electrical properties IDT BAS/TC 30 prBAS EN 61034-1/A2:2021 EN 61034-1:2005/A2:2020, IDT; Measurement of smoke density of pr en,fr 29.020, 10.99 IEC 61034-1:2005/AMD2:2019, cables burning under defined conditions - 13.220.40, IDT Part 1: Test apparatus 29.060.20
149 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN 61034-2/A2:2021 EN 61034-2:2005/A2:2020, IDT; Measurement of smoke density of pr en,fr 29.020, 10.99 IEC 61034-2:2005/AMD2:2019, cables burning under defined conditions - 13.220.40, IDT Part 2: Test procedure and 29.060.20 requirements BAS/TC 30 prBAS EN 62751-2/A1:2021 EN 62751-2:2014/A1:2019, IDT; Power losses in voltage sourced pr en,fr 29.240, 10.99 IEC 62751-2:2014/AMD1:2019, converter (VSC) valves for high-voltage 29.200 IDT direct current (HVDC) systems - Part 2: Modular multilevel converters BAS/TC 30 prBAS EN 62752/A1:2021 EN 62752:2016/A1:2020, IDT; In-cable control and protection device pr en,fr 29.120.50 10.99 IEC 62752:2016/AMD1:2018, IDT for mode 2 charging of electric road vehicles (IC-CPD) BAS/TC 30 prBAS EN 62752/Cor 1:2021 EN 62752:2016/AC:2019-03, In-cable control and protection device pr en,fr 29.120.50 10.99 IDT; IEC for mode 2 charging of electric road 62752:2016/COR1:2019, IDT vehicles (IC-CPDs) BAS/TC 30 prBAS EN 62823/A1:2021 EN 62823:2015/A1:2020, IDT; Thyristor valves for thyristor controlled pr en,fr 29.240.99 10.99 IEC 62823:2015/AMD1:2019, IDT series capacitors (TCSC) - Electrical testing BAS/TC 30 prBAS EN IEC 60309-5:2021 EN IEC 60309-5:2019, IDT; IEC Plugs, socket-outlets and couplers for pr en,fr 29.120.30 10.99 60309-5:2017, IDT industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC) BAS/TC 30 prBAS EN IEC 60317-0-2:2021 EN IEC 60317-0-2:2020, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-0-2:2020, IDT winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire BAS/TC 30 prBAS EN IEC 60317-0-4:2021 EN IEC 60317-0-4:2020, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-0-4:2020, IDT winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire BAS/TC 30 prBAS EN IEC 60317-0-6:2021 EN IEC 60317-0-6:2020, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-0-6:2020, IDT winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
150 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN IEC 60317-0-8:2021 EN IEC 60317-0-8:2019, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-0-8:2019, IDT winding wires - Part 0-8: General requirements - Polyester glass-fibre wound unvarnished and fused, or resin or varnish impregnated, bare or enamelled rectangular copper wire BAS/TC 30 prBAS EN IEC 60317-12:2021 EN IEC 60317-12:2020, IDT; IEC Specifications for particular types of pr en,fr 29.060.10 10.99 60317-12:2020, IDT winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
BAS/TC 30 prBAS EN IEC 60317-17:2021 EN IEC 60317-17:2020, IDT; IEC Specifications for particular types of pr en,fr 29.060.10 10.99 60317-17:2020, IDT winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 BAS/TC 30 prBAS EN IEC 60317-18:2021 EN IEC 60317-18:2020, IDT; IEC Specifications for particular types of pr en,fr 29.060.10 10.99 60317-18:2020, IDT winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 BAS/TC 30 prBAS EN IEC 60317-25:2021 EN IEC 60317-25:2020, IDT; IEC Specifications for particular types of pr en,fr 29.060.10 10.99 60317-25:2020, IDT winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 BAS/TC 30 prBAS EN IEC 60317-27-1:2021 EN IEC 60317-27-1:2020, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-27-1:2020, IDT winding wires - Part 27-1: Paper tape covered round copper wire BAS/TC 30 prBAS EN IEC 60317-27-2:2021 EN IEC 60317-27-2:2020, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-27-2:2020, IDT winding wires - Part 27-2: Paper tape covered round aluminium wire BAS/TC 30 prBAS EN IEC 60317-27-3:2021 EN IEC 60317-27-3:2019, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-27-3:2019, IDT winding wires - Part 27-3: Paper tape covered rectangular copper wire BAS/TC 30 prBAS EN IEC 60317-27-4:2021 EN IEC 60317-27-4:2020, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-27-4:2020, IDT winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
151 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN IEC 60317-60-1:2021 EN IEC 60317-60-1:2020, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-60-1:2020, IDT winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or enamelled rectangular copper wire, temperature index 155 BAS/TC 30 prBAS EN IEC 60317-60-2:2021 EN IEC 60317-60-2:2020, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-60-2:2020, IDT winding wires - Part 60-2: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 BAS/TC 30 prBAS EN IEC 60317-61:2021 EN IEC 60317-61:2020, IDT; IEC Specifications for particular types of pr en,fr 29.060.10 10.99 60317-61:2020, IDT winding wires - Part 61: Polyester glass- fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 BAS/TC 30 prBAS EN IEC 60317-62:2021 EN IEC 60317-62:2020, IDT; IEC Specifications for particular types of pr en,fr 29.060.10 10.99 60317-62:2020, IDT winding wires - Part 62: Polyester glass- fibre wound, silicone resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 BAS/TC 30 prBAS EN IEC 60317-70-1:2021 EN IEC 60317-70-1:2020, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-70-1:2020, IDT winding wires - Part 70-1: Polyester glass-fibre wound unvarnished and fused, bare or enamelled round copper wire, temperature index 155 BAS/TC 30 prBAS EN IEC 60317-70-2:2021 EN IEC 60317-70-2:2020, IDT; Specifications for particular types of pr en,fr 29.060.10 10.99 IEC 60317-70-2:2020, IDT winding wires - Part 70-2: Polyester glass-fibre wound resin/varnish impregnated, bare or enamelled round copper wire, temperature index 155 BAS/TC 30 prBAS EN IEC 60317-71:2021 EN IEC 60317-71:2020, IDT; IEC Specifications for particular types of pr en,fr 29.060.10 10.99 60317-71:2020, IDT winding wires - Part 71: Polyester glass- fibre wound and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
152 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN IEC 60317-72:2021 EN IEC 60317-72:2020, IDT; IEC Specifications for particular types of pr en,fr 29.060.10 10.99 60317-72:2020, IDT winding wires - Part 72: Polyester glass- fibre wound silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature index 200 BAS/TC 30 prBAS EN IEC 60317-80:2021 EN IEC 60317-80:2019, IDT; IEC Specifications for particular types of pr en,fr 29.060.10 10.99 60317-80:2019, IDT winding wires - Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120, with a bonding layer BAS/TC 30 prBAS EN IEC 60317-82:2021 EN IEC 60317-82:2020, IDT; IEC Specifications for particular types of pr en,fr 29.060.10 10.99 60317-82:2020, IDT winding wires - Part 82: Polyesterimide enamelled rectangular copper wire, class 200 BAS/TC 30 prBAS EN IEC 60352-3:2021 EN IEC 60352-3:2020, IDT; IEC Solderless connections - Part 3: pr en,fr 29.120.20 10.99 60352-3:2020, IDT Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance
BAS/TC 30 prBAS EN IEC 60352-4:2021 EN IEC 60352-4:2020, IDT; IEC Solderless connections - Part 4: Non- pr en,fr 29.120.20 10.99 60352-4:2020, IDT accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance
BAS/TC 30 prBAS EN IEC 60352-5:2021 EN IEC 60352-5:2020, IDT; IEC Solderless connections - Part 5: Press- pr en,fr 31.220.10 10.99 60352-5:2020, IDT in connections - General requirements, test methods and practical guidance BAS/TC 30 prBAS EN IEC 60512-28- EN IEC 60512-28-100:2019, IDT; Connectors for electrical and electronic pr en,fr 31.220.10 10.99 100:2021 IEC 60512-28-100:2019, IDT equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g
BAS/TC 30 prBAS EN IEC 60512-9-5:2021 EN IEC 60512-9-5:2020, IDT; Connectors for electrical and electronic pr en,fr 31.220.01 10.99 IEC 60512-9-5:2020, IDT equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
153 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN IEC 60519-1:2021 EN IEC 60519-1:2020, IDT; IEC Safety in installations for electroheating pr en,fr 25.180.10 10.99 60519-1:2020, IDT and electromagnetic processing - Part 1: General requirements
BAS/TC 30 prBAS EN IEC 60519-8:2021 EN IEC 60519-8:2020, IDT; IEC Safety in installations for electroheating pr en,fr 25.180.10 10.99 60519-8:2020, IDT and electromagnetic processing - Part 8: Particular requirements for electroslag remelting furnaces
BAS/TC 30 prBAS EN IEC 60633/Cor 1:2021 EN IEC 60633:2019/AC:2020-04, High-voltage direct current (HVDC) pr en,fr 29.200 10.99 IDT; IEC transmission - Vocabulary 60633:2019/COR1:2020, IDT BAS/TC 30 prBAS EN IEC 60667-1:2021 EN IEC 60667-1:2020, IDT; IEC Vulcanized fibre for electrical purposes - pr en,fr 29.035.10 10.99 60667-1:2020, IDT Part 1: Definitions and general requirements BAS/TC 30 prBAS EN IEC 60667-2:2021 EN IEC 60667-2:2020, IDT; IEC Vulcanized fibre for electrical purposes - pr en,fr 29.035.10 10.99 60667-2:2020, IDT Part 2: Methods of test BAS/TC 30 prBAS EN IEC 60667-3-1:2021 EN IEC 60667-3-1:2020, IDT; Vulcanized fibre for electrical purposes - pr en,fr 29.035.10 10.99 IEC 60667-3-1:2020, IDT Part 3: Specifications for individual materials - Sheet 1: Flat sheets BAS/TC 30 prBAS EN IEC 60684-3-214:2021 EN IEC 60684-3-214:2019, IDT; Flexible insulating sleeving - Part 3: pr en,fr 29.035.20 10.99 IEC 60684-3-214:2019, IDT Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall BAS/TC 30 prBAS EN IEC 60684-3-216:2021 EN IEC 60684-3-216:2019, IDT; Flexible insulating sleeving - Part 3: pr en,fr 29.035.20 10.99 IEC 60684-3-216:2019, IDT Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving BAS/TC 30 prBAS EN IEC 60684-3-247:2021 EN IEC 60684-3-247:2019, IDT; Flexible insulating sleeving - Part 3: pr en,fr 29.035.20 10.99 IEC 60684-3-247:2019, IDT Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
154 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN IEC 60684-3-280:2021 EN IEC 60684-3-280:2019, IDT; Flexible insulating sleeving - Part 3: pr en,fr 29.035.20 10.99 IEC 60684-3-280:2019, IDT Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking BAS/TC 30 prBAS EN IEC 60684-3-283:2021 EN IEC 60684-3-283:2019, IDT; Flexible insulating sleeving - Part 3: pr en,fr 29.035.20 10.99 IEC 60684-3-283:2019, IDT Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation
BAS/TC 30 prBAS EN IEC 60779:2021 EN IEC 60779:2020, IDT; IEC Installations for electroheating and pr en,fr 25.180.10 10.99 60779:2020, IDT electromagnetic processing - Test methods for electroslag remelting furnaces BAS/TC 30 prBAS EN IEC 60917-1:2021 EN IEC 60917-1:2019, IDT; IEC Modular order for the development of pr en,fr 31.240 10.99 60917-1:2019, IDT mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard BAS/TC 30 prBAS EN IEC 60934:2021 EN IEC 60934:2019, IDT; IEC Circuit breakers for equipment (CBE) pr en,fr 29.120.50, 10.99 60934:2019, IDT 29.120.40 BAS/TC 30 prBAS EN IEC 61076-2-012:2021 EN IEC 61076-2-012:2020, IDT; Connectors for electrical and electronic pr en,fr 31.220.10 10.99 IEC 61076-2-012:2020, IDT equipment - Product Requirements - Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113
BAS/TC 30 prBAS EN IEC 61076-3-123:2021 EN IEC 61076-3-123:2019, IDT; Connectors for electrical and electronic pr en,fr 31.220.10 10.99 IEC 61076-3-123:2019, IDT equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking
155 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN IEC 61076-3-124/Cor EN IEC 61076-3- Connectors for electrical and electronic pr en,fr 31.220.10 10.99 1:2021 124:2019/AC:2020-04, IDT; IEC equipment - Product requirements - Part 61076-3-124:2019/COR1:2020, 3-124: Rectangular connectors - Detail IDT specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz
BAS/TC 30 prBAS EN IEC 61076-8-100:2021 EN IEC 61076-8-100:2020, IDT; Connectors for electrical and electronic pr en,fr 31.220.10 10.99 IEC 61076-8-100:2020, IDT equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A BAS/TC 30 prBAS EN IEC 61076-8-101:2021 EN IEC 61076-8-101:2020, IDT; Connectors for electrical and electronic pr en,fr 31.220.10 10.99 IEC 61076-8-101:2020, IDT equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A BAS/TC 30 prBAS EN IEC 61076-8-102:2021 EN IEC 61076-8-102:2020, IDT; Connectors for electrical and electronic pr en,fr 31.220.10 10.99 IEC 61076-8-102:2020, IDT equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
BAS/TC 30 prBAS EN IEC 61169-1-2:2021 EN IEC 61169-1-2:2019, IDT; Radio-frequency connectors - Part 1-2: pr en,fr 33.120.30 10.99 IEC 61169-1-2:2019, IDT Electrical test methods - Insertion loss BAS/TC 30 prBAS EN IEC 61169-1-4:2021 EN IEC 61169-1-4:2020, IDT; Radio-frequency connectors - Part 1-4: pr en,fr 33.120.30 10.99 IEC 61169-1-4:2020, IDT Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient
156 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN IEC 61169-24:2021 EN IEC 61169-24:2019, IDT; IEC Radio-frequency connectors - Part 24: pr en,fr 31.220.10 10.99 61169-24:2019, IDT Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F) BAS/TC 30 prBAS EN IEC 61169-61:2021 EN IEC 61169-61:2020, IDT; IEC Radio-frequency connectors - Part 61: pr en,fr 33.120.30 10.99 61169-61:2020, IDT Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of outer conductor, quick lock coupling, series Q4.1-9.5 BAS/TC 30 prBAS EN IEC 61169-63:2021 EN IEC 61169-63:2020, IDT; IEC Radio-frequency connectors - Part 63: pr en,fr 33.120.30 10.99 61169-63:2020, IDT Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (type BNC75) BAS/TC 30 prBAS EN IEC 61169-64:2021 EN IEC 61169-64:2019, IDT; IEC Radio frequency connectors - Part 64: pr en,fr 33.120.30 10.99 61169-64:2019, IDT Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 Ω (type 0,8)
BAS/TC 30 prBAS EN IEC 61225:2021 EN IEC 61225:2020, IDT; IEC Nuclear power plants - Instrumentation, pr en,fr 27.120.20 10.99 61225:2019, IDT control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems
BAS/TC 30 prBAS EN IEC 61238-1-1:2021 EN IEC 61238-1-1:2019, IDT; Compression and mechanical pr en 29.060.20 10.99 IEC 61238-1-1:2018, IDT connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
157 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN IEC 61238-1-2:2021 EN IEC 61238-1-2:2019, IDT; Compression and mechanical pr en 29.060.20 10.99 IEC 61238-1-2:2018, IDT connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors
BAS/TC 30 prBAS EN IEC 61238-1- EN IEC 61238-1- Compression and mechanical pr en,fr 29.060.20 10.99 3/A11:2021 3:2019/A11:2019, IDT connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non- insulated conductors BAS/TC 30 prBAS EN IEC 61238-1-3:2021 EN IEC 61238-1-3:2019, IDT; Compression and mechanical pr en 29.060.20 10.99 IEC 61238-1-3:2018, IDT connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non- insulated conductors BAS/TC 30 prBAS EN IEC 61535:2021 EN IEC 61535:2019, IDT; IEC Installation couplers intended for pr en,fr 29.120.99, 10.99 61535:2019, IDT permanent connection in fixed 29.100.99 installations BAS/TC 30 prBAS EN IEC 61854:2021 EN IEC 61854:2020, IDT; IEC Overhead lines - Requirements and pr en,fr 29.240.20 10.99 61854:2020, IDT tests for spacers BAS/TC 30 prBAS EN IEC 61897:2021 EN IEC 61897:2020, IDT; IEC Overhead lines - Requirements and pr en,fr 29.240.20 10.99 61897:2020, IDT tests for Aeolian vibration dampers BAS/TC 30 prBAS EN IEC 61969-1:2021 EN IEC 61969-1:2020, IDT; IEC Mechanical structures for electrical and pr en,fr 31.240 10.99 61969-1:2020, IDT electronic equipment - Outdoor enclosures - Part 1: Design guidelines BAS/TC 30 prBAS EN IEC 61969-3:2021 EN IEC 61969-3:2020, IDT; IEC Mechanical structures for electrical and pr en,fr 31.240 10.99 61969-3:2020, IDT electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
158 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN IEC 62003:2021 EN IEC 62003:2020, IDT; IEC Nuclear power plants - Instrumentation, pr en,fr 27.120.20 10.99 62003:2020, IDT control and electrical power systems - Requirements for electromagnetic compatibility testing BAS/TC 30 prBAS EN IEC 62040-1/Cor EN IEC 62040-1:2019/AC:2019- Uninterruptible power systems (UPS) - pr en,fr 29.200 10.99 1:2021 11, IDT; IEC 62040- Part 1: Safety requirements 1:2017/COR1:2019, IDT BAS/TC 30 prBAS EN IEC 62138:2021 EN IEC 62138:2019, IDT; IEC Nuclear power plants - Instrumentation pr en,fr 27.120.20 10.99 62138:2018, IDT and control systems important to safety - Software aspects for computer-based systems performing category B or C functions BAS/TC 30 prBAS EN IEC 62275:2021 EN IEC 62275:2019, IDT; IEC Cable management systems - Cable pr en,fr 29.120.99, 10.99 62275:2018, IDT ties for electrical installations 29.120.10 BAS/TC 30 prBAS EN IEC 62610-6:2021 EN IEC 62610-6:2020, IDT; IEC Mechanical structures for electrical and pr en 31.240 10.99 62610-6:2020, IDT electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 6: Air recirculation and bypass of indoor cabinets BAS/TC 30 prBAS EN IEC 62645:2021 EN IEC 62645:2020, IDT; IEC Nuclear power plants - Instrumentation, pr en,fr 27.120.20 10.99 62645:2019, IDT control and electrical power systems - Cybersecurity requirements
BAS/TC 30 prBAS EN IEC 62859:2021 EN IEC 62859:2020, IDT; IEC Nuclear power plants - Instrumentation pr en,fr 27.120.20 10.99 62859:2016/AMD1:2019, IDT; and control systems - Requirements for IEC 62859:2016, IDT coordinating safety and cybersecurity
BAS/TC 30 prBAS EN IEC 62966-2:2021 EN IEC 62966-2:2020, IDT; IEC Mechanical structures for electrical and pr en,fr 31.240 10.99 62966-2:2020, IDT electronic equipment - Aisle containment for IT cabinets - Part 2: Details of air flow, air separation and air cooling requirements BAS/TC 30 prBAS EN IEC 63078:2021 EN IEC 63078:2020, IDT; IEC Installations for electroheating and pr en,fr 25.180.10 10.99 63078:2019, IDT electromagnetic processing - Test methods for induction through-heating installations
159 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS EN IEC 63137-1/Cor EN IEC 63137-1:2019/AC:2020- Standard test radio-frequency pr en,fr 33.120.30 10.99 1:2021 02, IDT; IEC 63137- connectors - Part 1: Generic 1:2019/COR1:2020, IDT specification - General requirements and test methods BAS/TC 30 prBAS EN IEC 63137-1:2021 EN IEC 63137-1:2019, IDT; IEC Standard test radio-frequency pr en,fr 33.120.30 10.99 63137-1:2019, IDT connectors - Part 1: Generic specification - General requirements and test methods BAS/TC 30 prBAS EN IEC 63138-1:2021 EN IEC 63138-1:2019, IDT; IEC Multi-channel radio frequency pr en,fr 33.120.30 10.99 63138-1:2019, IDT connectors - Part 1: Generic specification - General requirements and test methods BAS/TC 30 prBAS EN IEC 63171-1:2021 EN IEC 63171-1:2020, IDT; IEC Connectors for electrical and electronic pr en,fr 31.220.10 10.99 63171-1:2020, IDT equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style
BAS/TC 30 prBAS EN IEC 63171-6:2021 EN IEC 63171-6:2020, IDT; IEC Connectors for electrical and electronic pr en,fr 31.220.10 10.99 63171-6:2020, IDT equipment - Part 6: Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for power and data transmission with frequencies up to 600 MHz.
BAS/TC 30 prBAS EN IEC 63172:2021 EN IEC 63172:2020, IDT; IEC Electrical accessories - Methodology for pr en,fr 27.015, 10.99 63172:2020, IDT determining the energy efficiency class 29.120.01 of electrical accessories BAS/TC 30 prBAS EN IEC 63180:2021 EN IEC 63180:2020, IDT; IEC Methods of measurement and pr en,fr 29.120.40 10.99 63180:2020, IDT declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection BAS/TC 30 prBAS HD 361 S4:2021 HD 361 S4:2020, IDT System for cable designation pr en 29.060 10.99 BAS/TC 30 prBAS HD 605 S3:2021 HD 605 S3:2019, IDT Electric cables - Additional test methods pr en 29.060.20 10.99
160 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 30 prBAS HD 629.1 S3:2021 HD 629.1 S3:2019, IDT Test requirements for accessories for pr en 29.060.20 10.99 use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 1: Accessories for cables with extruded insulation BAS/TC 31 prBAS EN ISO 6145-1:2021 EN ISO 6145-1:2019, IDT; ISO Gas analysis - Preparation of calibration pr en 71.040.40 10.99 6145-1:2019, IDT gas mixtures using dynamic methods - Part 1: General aspects
BAS/TC 31 prBAS EN 16905-2:2021 EN 16905-2:2020, IDT Gas-fired endothermic engine driven pr en 27.080 10.99 heat pumps - Part 2: Safety BAS/TC 31 prBAS EN 676:2021 EN 676:2020, IDT Forced draught burners for gaseous pr en 27.060.20 10.99 fuels BAS/TC 31 prBAS EN 12542:2021 EN 12542:2020, IDT LPG equipment and accessories - Static pr en 23.020.30 10.99 welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture BAS/TC 31 prBAS EN 17082:2021 EN 17082:2019, IDT Domestic and non-domestic gas-fired pr en 97.100.20 10.99 forced convection air heaters for space heating not exceeding a net heat input of 300 kW BAS/TC 31 prBAS EN ISO 20257-1:2021 EN ISO 20257-1:2020, IDT; ISO Installation and equipment for liquefied pr en 75.200 10.99 20257-1:2020, IDT natural gas - Design of floating LNG installations - Part 1: General requirements BAS/TC 31 prBAS EN 419:2021 EN 419:2019, IDT Gas-fired overhead luminous radiant pr en 97.100.20 10.99 heaters for non-domestic use - Safety and energy efficiency BAS/TC 31 prBAS EN 15202:2021 EN 15202:2019, IDT LPG equipment and accessories - pr en 23.060.40 10.99 Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
161 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 31 prBAS EN ISO 6141/A1:2021 EN ISO 6141:2015/A1:2020, IDT; Gas analysis - Contents of certificates pr en 71.040.40, 10.99 ISO 6141:2015/Amd 1:2020, IDT for calibration gas mixtures - 71.040.30 Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 BAS/TC 31 prBAS EN ISO 20088-2:2021 EN ISO 20088-2:2020, IDT; ISO Determination of the resistance to pr en 75.200 10.99 20088-2:2020, IDT cryogenic spill of insulation materials - Part 2: Vapour exposure BAS/TC 31 prBAS EN 1749:2021 EN 1749:2020, IDT Classification of gas appliances pr en 91.140.40 10.99 according to the method of supplying combustion air and of evacuation of the combustion products (types) BAS/TC 31 prBAS CEN/TR 17452:2021 CEN/TR 17452:2020, IDT Natural gas fuelling stations — pr en 75.200 10.99 Guidance for implementation of European standards on CNG and LNG stations for fuelling vehicles BAS/TC 31 prBAS EN 484/Cor1:2021 EN 484:2019/AC:2020, IDT Specification for dedicated liquefied pr en 97.040.20 10.99 petroleum gas appliances - Independent stoves, including those incorporating a grill for outdoor use BAS/TC 31 prBAS EN 16728+A2:2021 EN 16728:2016+A2:2020, IDT LPG equipment and accessories - pr en 23.020.35 10.99 Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection
BAS/TC 31 prBAS EN 1440+A2:2021 EN 1440:2016+A2:2020, IDT LPG equipment and accessories - pr en 23.020.35 10.99 Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection BAS/TC 31 prBAS EN 16436-1+A3:2021 EN 16436-1:2014+A3:2020, IDT Rubber and plastics hoses, tubing and pr en 23.040.70 10.99 assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings BAS/TC 31 prBAS EN 15181+A1:2021 EN 15181:2017+A1:2020, IDT Measuring method of the energy pr en 97.040.20 10.99 consumption of gas fired ovens
162 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 31 prBAS EN 13175+A1:2021 EN 13175:2019+A1:2020, IDT LPG Equipment and accessories - pr en 23.060.01 10.99 Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings BAS/TC 31 prBAS ISO 23551-4:2021 ISO 23551-4:2018, IDT Safety and control devices for gas ko en 27.060.20 10.99 burners and gas-burning appliances - Particular requirements - Part 4: Valve- proving systems for automatic shut-off valves BAS/TC 31 prBAS ISO 23551-2:2021 ISO 23551-2:2018, IDT Safety and control devices for gas ko en 27.060.20 10.99 burners and gas-burning appliances - Particular requirements - Part 2: Pressure regulators BAS/TC 31 prBAS ISO 23550:2021 ISO 23550:2018, IDT Safety and control devices for gas ko en 27.060.20 10.99 and/or oil burners and appliances - General requirements BAS/TC 31 prBAS ISO 23551-10:2021 ISO 23551-10:2016, IDT Safety and control devices for gas ko en 27.060.20 10.99 burners and gas-burning appliances - Particular requirements - Part 10: Vent valves BAS/TC 31 prBAS ISO 23551-8/A1:2021 ISO 23551-8:2016/Amd 1:2019, Safety and control devices for gas ko en 27.060.20 10.99 IDT burners and gas-burning appliances — Particular requirements —Part 8:Multifunctional controls - AMENDMENT 1: Overheating safety devices BAS/TC 31 prBAS ISO 20729:2021 ISO 20729:2017, IDT Natural gas - Determination of sulfur ko en 75.060 10.99 compounds - Determination of total sulfur content by ultraviolet fluorescence method BAS/TC 35 nsBAS ISO 21308-1:2020 ISO 21308-1:2018, IDT Road vehicles - Product data exchange ko en 43.080.01 40.60 between chassis and bodywork manufacturers (BEP) - Part 1: General principles BAS/TC 35 nsBAS ISO 19825:2020 ISO 19825:2018, IDT Road vehicles - Liquefied petroleum gas ko en 43.060.40 40.60 (LPG) refuelling connector
163 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 35 nsBAS ISO 22241-1:2020 ISO 22241-1:2019, IDT Diesel engines - NOx reduction agent ko en 43.060.40 40.60 AUS 32 - Part 1: Quality requirements
BAS/TC 35 nsBAS ISO 22241-2:2020 ISO 22241-2:2019, IDT Diesel engines - NOx reduction agent ko en 43.060.40 40.60 AUS 32 - Part 2: Test methods BAS/TC 35 nsBAS ISO 22241-4:2020 ISO 22241-4:2019, IDT Diesel engines - NOx reduction agent ko en 43.060.40 40.60 AUS 32 - Part 4: Refilling interface BAS/TC 35 nsBAS ISO 3888-1:2020 ISO 3888-1:2018, IDT Passenger cars - Test track for a severe ko en 43.100, 40.60 lane-change manoeuvre - Part 1: 43.180 Double lane-change BAS/TC 35 nsBAS ISO 26262-1:2020 ISO 26262-1:2018, IDT Road vehicles - Functional safety - Part ko en 01.040.43, 40.60 1: Vocabulary 43.040.10 BAS/TC 35 nsBAS ISO 26262-2:2020 ISO 26262-2:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 2: Management of functional safety
BAS/TC 35 nsBAS ISO 26262-3:2020 ISO 26262-3:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 3: Concept phase BAS/TC 35 nsBAS ISO 26262-4:2020 ISO 26262-4:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 4: Product development at the system level BAS/TC 35 nsBAS ISO 26262-5:2020 ISO 26262-5:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 5: Product development at the hardware level BAS/TC 35 nsBAS ISO 26262-6:2020 ISO 26262-6:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 6: Product development at the software level BAS/TC 35 nsBAS ISO 26262-7:2020 ISO 26262-7:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 7: Production, operation, service and decommissioning BAS/TC 35 nsBAS ISO 26262-8:2020 ISO 26262-8:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 8: Supporting processes BAS/TC 35 nsBAS ISO 26262-9:2020 ISO 26262-9:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 9: Automotive safety integrity level (ASIL)-oriented and safety-oriented analyses BAS/TC 35 nsBAS ISO 26262-10:2020 ISO 26262-10:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 10: Guidelines on ISO 26262
164 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 35 nsBAS ISO 20574:2020 ISO 20574:2019, IDT Road vehicles - Durability test method ko en 43.060.50 40.60 for starter motor for stop and start system BAS/TC 35 nsBAS ISO 6469-3:2020 ISO 6469-3:2018, IDT Electrically propelled road vehicles - ko en 43.120 40.60 Safety specifications - Part 3: Electrical safety BAS/TC 35 nsBAS ISO 21308-7:2020 ISO 21308-7:2018, IDT Road vehicles - Product data exchange ko en 43.080.01 40.60 between chassis and body work manufacturers (BEP) - Part 7: Coding of skip loader bodywork BAS/TC 35 nsBAS ISO 21308-6:2020 ISO 21308-6:2018, IDT Road vehicles - Product data exchange ko en 43.080.01 40.60 between chassis and bodywork manufacturers (BEP) - Part 6: Coding of hook loader bodywork BAS/TC 35 nsBAS ISO 26262-11:2020 ISO 26262-11:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 11: Guidelines on application of ISO 26262 to semiconductors BAS/TC 35 nsBAS ISO 26262-12:2020 ISO 26262-12:2018, IDT Road vehicles - Functional safety - Part ko en 43.040.10 40.60 12: Adaptation of ISO 26262 for motorcycles BAS/TC 35 nsBAS ISO 22241-5:2020 ISO 22241-5:2019, IDT Diesel engines - NOx reduction agent ko en 43.060.40 40.60 AUS 32 - Part 5: Refilling interface for passenger cars BAS/TC 35 nsBAS ISO 21266-1:2020 ISO 21266-1:2018, IDT Road vehicles - Compressed gaseous ko en 43.060.40 40.60 hydrogen (CGH2) and hydrogen/natural gas blends fuel systems - Part 1: Safety requirements BAS/TC 35 nsBAS ISO 21266-2:2020 ISO 21266-2:2018, IDT Road vehicles - Compressed gaseous ko en 43.060.40 40.60 hydrogen (CGH2) and hydrogen/natural gas blends fuel systems - Part 2: Test methods BAS/TC 35 nsBAS ISO 21755-1:2020 ISO 21755-1:2019, IDT Motorcycles - Measurement method for ko en 43.140, 40.60 evaporative emissions - Part 1: SHED 13.040.50 test procedure BAS/TC 35 nsBAS ISO 8820-6:2020 ISO 8820-6:2019, IDT Road vehicles - Fuse-links - Part 6: ko en 43.040.10 40.60 Single-bolt fuse-links
165 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 35 nsBAS ISO 21782-1:2020 ISO 21782-1:2019, IDT Electrically propelled road vehicles - ko en 43.120 40.60 Test specification for electric propulsion components - Part 1: General test conditions and definitions BAS/TC 35 nsBAS ISO 21782-2:2020 ISO 21782-2:2019, IDT Electrically propelled road vehicles - ko en 43.120 40.60 Test specification for electric propulsion components - Part 2: Performance testing of the motor system
BAS/TC 35 nsBAS ISO 21782-3:2020 ISO 21782-3:2019, IDT Electrically propelled road vehicles - ko en 43.120 40.60 Test specification for electric propulsion components - Part 3: Performance testing of the motor and the inverter
BAS/TC 35 nsBAS ISO 21782-6:2020 ISO 21782-6:2019, IDT Electrically propelled road vehicles - ko en 43.120 40.60 Test specification for electric propulsion components - Part 6: Operating load testing of motor and inverter
BAS/TC 35 nsBAS ISO 22565:2020 ISO 22565:2019, IDT Road vehicles - Durability test method of ko en 43.060.50 40.60 starter relay for stop and start system
BAS/TC 35 nsBAS ISO 7612:2020 ISO 7612:2018, IDT Diesel engines - Base-mounted in-line ko en 43.060.40 40.60 fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions
BAS/TC 35 nsBAS ISO 23274-1:2020 ISO 23274-1:2019, IDT Hybrid-electric road vehicles - Exhaust ko en 43.120 40.60 emissions and fuel consumption measurements - Part 1: Non-externally chargeable vehicles BAS/TC 35 nsBAS ISO 7867-1:2020 ISO 7867-1:2018, IDT Metric series for agricultural, forestry ko en 83.160.30 40.60 machines and construction tyres - Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination
166 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 35 nsBAS ISO 7867-2:2020 ISO 7867-2:2018, IDT Metric series for agricultural, forestry ko en 83.160.30 40.60 machines and construction tyres - Part 2: Load ratings for agricultural tyres
BAS/TC 35 nsBAS ISO 20909:2020 ISO 20909:2019, IDT Radio frequency identification (RFID) ko en 35.040.50, 40.60 tyre tags 83.160.01 BAS/TC 35 nsBAS ISO 20910:2020 ISO 20910:2019, IDT Coding for radio frequency identification ko en 35.040.50, 40.60 (RFID) tyre tags 83.160.01 BAS/TC 35 nsBAS ISO 4251-1:2020 ISO 4251-1:2019, IDT Code designated diagonal tyres (ply ko en 83.160.30 40.60 rating marked series) for agricultural tractors, trailers and machines - Part 1: Tyre designation and dimensions, and approved rim contours BAS/TC 35 nsBAS ISO 4251-2:2020 ISO 4251-2:2019, IDT Code designated diagonal tyres (ply ko en 83.160.30 40.60 rating marked series) for agricultural tractors, trailers and machines - Part 2: Tyre load ratings BAS/TC 35 prBAS EN 61851-23/Cor1:2021 EN 61851-23:2014/AC:2016-06, Electric vehicle conductive charging pr en 43.120 10.99 IDT; IEC 61851- system - Part 23: DC electric vehicle 23:2014/COR1:2016, IDT charging station BAS/TC 35 prBAS ISO 15007:2021 ISO 15007:2020, IDT Road vehicles - Measurement and ko en 43.040.15, 10.99 analysis of driver visual behaviour with 13.180 respect to transport information and control systems BAS/TC 35 prBAS ISO 18669-2:2021 ISO 18669-2:2020, IDT Internal combustion engines - Piston ko en 43.060.10 10.99 pins - Part 2: Inspection measuring principles BAS/TC 35 prBAS ISO 12353-1:2021 ISO 12353-1:2020, IDT Road vehicles - Traffic accident analysis ko en 01.040.43, 10.99 - Part 1: Vocabulary 43.040.80 BAS/TC 35 prBAS ISO 6469-1:2021 ISO 6469-1:2019, IDT Electrically propelled road vehicles - ko en 43.120 10.99 Safety specifications - Part 1: Rechargeable energy storage system (RESS) BAS/TC 35 prBAS ISO 6621-5:2021 ISO 6621-5:2020, IDT Internal combustion engines - Piston ko en 43.060.10 10.99 rings - Part 5: Quality requirements
167 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 35 prBAS ISO 16750-1:2021 ISO 16750-1:2018, IDT Road vehicles - Environmental ko en 43.040.10 10.99 conditions and testing for electrical and electronic equipment - Part 1: General
BAS/TC 35 prBAS ISO 1585:2021 ISO 1585:2020, IDT Road vehicles - Engine test code - Net ko en 43.060.01 10.99 power BAS/TC 35 prBAS ISO 6621-2:2021 ISO 6621-2:2020, IDT Internal combustion engines - Piston ko en 43.060.10 10.99 rings - Part 2: Inspection measuring principles BAS/TC 35 prBAS ISO 21308-2:2021 ISO 21308-2:2020, IDT Road vehicles - Product data exchange ko en 43.080.01 10.99 between chassis and bodywork manufacturers (BEP) - Part 2: Dimensional bodywork exchange parameters BAS/TC 35 prBAS ISO 21308-3:2021 ISO 21308-3:2020, IDT Road vehicles - Product data exchange ko en 43.080.01 10.99 between chassis and bodywork manufacturers (BEP) - Part 3: General, mass and administrative exchange parameters BAS/TC 35 prBAS ISO 2534:2021 ISO 2534:2020, IDT Road vehicles - Engine test code - ko en 43.060.01 10.99 Gross power BAS/TC 35 prBAS ISO 9021:2021 ISO 9021:2020, IDT Motorcycles and mopeds - Controls - ko en 43.140 10.99 Types, positions and functions BAS/TC 35 prBAS ISO 12098:2021 ISO 12098:2020, IDT Road vehicles - Connectors for the ko en 43.040.10 10.99 electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24 V nominal supply voltage BAS/TC 35 prBAS ISO 25981:2021 ISO 25981:2020, IDT Road vehicles - Connectors for the ko en 43.040.10 10.99 electrical connection of towing and towed vehicles - Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage BAS/TC 35 prBAS ISO 5011:2021 ISO 5011:2020, IDT Inlet air cleaning equipment for internal ko en 43.060.20 10.99 combustion engines and compressors - Performance testing
168 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 35 prBAS ISO 17409:2021 ISO 17409:2020, IDT Electrically propelled road vehicles - ko en 43.120 10.99 Conductive power transfer - Safety requirements BAS/TC 35 prBAS ISO 19363:2021 ISO 19363:2020, IDT Electrically propelled road vehicles - ko en 43.120 10.99 Magnetic field wireless power transfer - Safety and interoperability requirements
BAS/TC 35 prBAS ISO 11452-4:2021 ISO 11452-4:2020, IDT Road vehicles - Component test ko en 33.100.20, 10.99 methods for electrical disturbances from 43.040.10 narrowband radiated electromagnetic energy - Part 4: Harness excitation methods BAS/TC 35 prBAS ISO 3584:2021 ISO 3584:2020, IDT Road vehicles - Clevis couplings - ko en 43.040.70 10.99 Interchangeability BAS/TC 35 prBAS ISO 23132:2021 ISO 23132:2020, IDT Road vehicles - Extended Vehicle ko en 43.040.15 10.99 (ExVe) time critical applications - General requirements, definitions and classification methodology of time- constrained situations related to Road and ExVe Safety (RExVeS) BAS/TC 35 prBAS ISO 13400-2:2021 ISO 13400-2:2019, IDT Road vehicles - Diagnostic ko en 43.180, 10.99 communication over Internet Protocol 43.040.10 (DoIP) - Part 2: Transport protocol and network layer services BAS/TC 35 prBAS ISO 20176:2021 ISO 20176:2020, IDT Road vehicles - H-point machine (HPM- ko en 43.020 10.99 II) - Specifications and procedure for H- point determination BAS/TC 35 prBAS ISO 15500-14:2021 ISO 15500-14:2020, IDT Road vehicles - Compressed natural ko en 43.060.40 10.99 gas (CNG) fuel system components - Part 14: Excess flow valve BAS/TC 35 prBAS ISO 6469-3/A1:2021 ISO 6469-3:2018/Amd 1:2020, Withstand voltage test for electric power ko en 43.120 10.99 IDT sources BAS/TC 35 prBAS ISO 19724:2021 ISO 19724:2020, IDT Gasoline engines with direct injection - ko en 43.060.40 10.99 Cleanliness assessment of fuel injection equipment
169 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 35 prBAS ISO 19072-2:2021 ISO 19072-2:2019, IDT Road vehicles - Connection interface for ko en 43.040.10 10.99 pyrotechnic devices, two-way and three- way connections - Part 2: Test methods and general performance requirements
BAS/TC 35 prBAS ISO 4926:2021 ISO 4926:2020, IDT Road vehicles - Hydraulic braking ko en 75.120, 10.99 systems - Non-petroleum-based 43.040.40 reference fluid BAS/TC 35 prBAS ISO 4925:2021 ISO 4925:2020, IDT Road vehicles - Specification of non- ko en 75.120, 10.99 petroleum-based brake fluids for 43.040.40 hydraulic systems BAS/TC 35 prBAS ISO 13325:2021 ISO 13325:2019, IDT Tyres - Coast-by methods for ko en 83.160.10, 10.99 measurement of tyre-to-road sound 17.140.30 emission BAS/TC 35 prBAS ISO 9413:2021 ISO 9413:2019, IDT Tyre valves - Dimensions and ko en 83.160.01 10.99 designation BAS/TC 35 prBAS ISO 4209-2:2021 ISO 4209-2:2020, IDT Truck and bus tyres and rims (metric ko en 43.040.50 10.99 series) - Part 2: Rims BAS/TC 35 prBAS ISO 3877-4:1984/A1:2021 ISO 3877-4:1984/Amd 1:2020, Tyres, valves and tubes; List of ko en 01.040.83, 10.99 IDT equivalent terms; Part 4 : Solid tyres 83.160.01 Trilingual edition - Amendment 1 BAS/TC 35 prBAS ISO 4250-3:2021 ISO 4250-3:2020, IDT Earth-mover tyres and rims - Part 3: ko en 53.100 10.99 Rims BAS/TC 35 prBAS EN ISO 15118-1:2021 EN ISO 15118-1:2019, IDT; ISO Road vehicles - Vehicle to grid pr en 43.120, 10.99 15118-1:2019, IDT communication interface - Part 1: 43.040.15 General information and use-case definition BAS/TC 35 prBAS EN 15597-2:2021 EN 15597-2:2019, IDT Winter maintenance equipment - pr en 13.030.40 10.99 Spreading and spraying machines - Part 2: Requirements for distribution and their test BAS/TC 35 prBAS EN 15597-1:2021 EN 15597-1:2020, IDT Winter maintenance equipment - pr en 13.030.40 10.99 Spreading and spraying machines - Part 1: General requirements and definitions
BAS/TC 35 prBAS EN 1175:2021 EN 1175:2020, IDT Safety of industrial trucks - pr en 53.060 10.99 Electrical/electronic requirements
170 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 35 prBAS EN 721:2021 EN 721:2019, IDT Leisure accommodation vehicles - pr en 43.100 10.99 Safety ventilation requirements BAS/TC 35 prBAS EN 16307-1:2021 EN 16307-1:2020, IDT Industrial trucks - Safety requirements pr en 53.060 10.99 and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks BAS/TC 35 prBAS EN ISO 17409:2021 EN ISO 17409:2020, IDT; ISO Electrically propelled road vehicles - pr en 43.120 10.99 17409:2020, IDT Conductive power transfer - Safety requirements BAS/TC 35 prBAS EN 1459-1+A1:2021 EN 1459-1:2017+A1:2020, IDT Rough-terrain trucks - Safety pr en 53.060 10.99 requirements and verification - Part 1: Variable-reach trucks BAS/TC 35 prBAS EN 16842-9/Cor1:2021 EN 16842-9:2019/AC:2020, IDT Powered industrial trucks - Visibility - pr en 53.060 10.99 Test methods and verification - Part 9: Order-picking, lateral- and front-stacking trucks with elevating operator position
BAS/TC 35 prBAS EN 29367-1/Cor1:2021 EN 29367-1:1993/AC:1994, IDT Lashing and securing arrangements on pr en 43.080.10 10.99 road vehicles for sea transportation on Ro/ro ships - General requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded BAS/TC 35 prBAS EN IEC 61851-1:2021 EN IEC 61851-1:2019, IDT; IEC Electric vehicle conductive charging pr en 43.120 10.99 61851-1:2017, IDT system - Part 1: General requirements BAS/TC 35 prBAS EN IEC 62576:2021 EN IEC 62576:2018, IDT; IEC Electric double-layer capacitors for use pr en 43.120, 10.99 62576:2018, IDT in hybrid electric vehicles - Test 31.060.99 methods for electrical characteristics BAS/TC 35 prBAS EN 61851-21-1:2021 EN 61851-21-1:2017, IDT; IEC Electric vehicle conductive charging pr en 43.120 10.99 61851-21-1:2017, IDT system - Part 21-1: Electric vehicle on- board charger EMC requirements for conductive connection to an AC/DC supply BAS/TC 35 prBAS EN IEC 62840-2:2021 EN IEC 62840-2:2019, IDT; IEC Electric vehicle battery swap system - pr en 43.120 10.99 62840-2:2016, IDT Part 2: Safety requirements
171 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 35 prBAS EN 61851-21-1/Cor1:2021 EN 61851-21-1:2017/AC:2017- Electric vehicle conductive charging pr en 43.120 10.99 11, IDT system - Part 21-1: Electric vehicle on- board charger EMC requirements for conductive connection to an AC/DC supply BAS/TC 35 prBAS EN IEC 63119-1:2021 EN IEC 63119-1:2019, IDT; IEC Information exchange for electric vehicle pr en 35.240.01, 10.99 63119-1:2019, IDT charging roaming service - Part 1: 43.120, General 29.130.20 BAS/TC 35 prBAS EN ISO 16380:2021 EN ISO 16380:2018, IDT; ISO Road vehicles - Blended fuels refuelling pr en 75.200 10.99 16380:2014/Amd 1:2016, IDT; connector ISO 16380:2014, IDT BAS/TC 35 prBAS EN ISO 18243:2021 EN ISO 18243:2019, IDT; ISO Electrically propelled mopeds and pr en 43.140 10.99 18243:2017, IDT motorcycles - Test specifications and safety requirements for lithium-ion battery systems BAS/TC 35 prBAS EN 16662-1:2021 EN 16662-1:2020, IDT Road vehicles - Supplementary grip pr en 83.160.10 10.99 devices for tyres of passenger cars and light duty vehicles - Part 1: General safety and performance requirements
BAS/TC 35 prBAS EN ISO 15118-4:2021 EN ISO 15118-4:2019, IDT; ISO Road vehicles - Vehicle to grid pr en 43.120 10.99 15118-4:2018, IDT communication interface - Part 4: Network and application protocol conformance test BAS/TC 35 prBAS EN ISO 15118-5:2021 EN ISO 15118-5:2019, IDT; ISO Road vehicles - Vehicle to grid pr en 43.120 10.99 15118-5:2018, IDT communication interface - Part 5: Physical layer and data link layer conformance test BAS/TC 35 prBAS EN ISO 15118-8:2021 EN ISO 15118-8:2019, IDT; ISO Road vehicles - Vehicle to grid pr en 43.120 10.99 15118-5:2018, IDT communication interface - Part 8: Physical layer and data link layer requirements for wireless communication BAS/TC 35 prBAS EN ISO 3691-1/A1:2021 EN ISO 3691-1:2015/A1:2020, Industrial trucks - Safety requirements pr en 53.060 10.99 IDT; ISO 3691-1:2011/Amd and verification - Part 1: Self-propelled 1:2020, IDT industrial trucks, other than driverless trucks, variable-reach trucks and burden- carrier trucks - Amendment 1
172 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 35 prBAS CEN/TS 1459-8:2021 CEN/TS 1459-8:2018, IDT Rough-terrain trucks - Safety pr en 53.060 10.99 requirements and verification - Part 8: Variable-reach tractors BAS/TC 35 prBAS EN ISO 3691-4:2021 EN ISO 3691-4:2020, IDT; ISO Industrial trucks - Safety requirements pr en 53.060 10.99 3691-4:2020, IDT and verification - Part 4: Driverless industrial trucks and their systems BAS/TC 35 prBAS EN 16796-6:2021 EN 16796-6:2020, IDT Energy efficiency of Industrial trucks - pr en 53.060 10.99 Test methods - Part 6: Container straddle carrier BAS/TC 35 prBAS EN 17314:2021 EN 17314:2020, IDT Industrial trucks - Specifications and test pr en 53.060 10.99 methods - Operator restraint systems other than lap-type seat belts BAS/TC 35 prBAS EN 16842-10:2021 EN 16842-10:2020, IDT Powered industrial trucks - Visibility - pr en 53.060 10.99 Test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier BAS/TC 35 prBAS EN ISO 3691-5/A1:2021 EN ISO 3691-5:2015/A1:2020, Industrial trucks - Safety requirements pr en 53.060 10.99 IDT; ISO 3691-5:2014/Amd and verification - Part 5: Pedestrian- 1:2020, IDT propelled trucks - Amendment 1 BAS/TC 36 prBAS ISO 2923/Cor1:2021 ISO 2923:1996/Cor 1:1997, IDT Acoustics - Measurement of noise on ko en 47.020.01, 10.99 board vessels - TECHNICAL 17.140.30 CORRIGENDUM 1 BAS/TC 36 prBAS ISO 362-2:2021 ISO 362-2:2009, IDT Measurement of noise emitted by ko en 43.020, 10.99 accelerating road vehicles - Engineering 17.140.30 method - Part 2: L category
BAS/TC 36 prBAS ISO 362-1:2021 ISO 362-1:2015, IDT Measurement of noise emitted by ko en 43.020, 10.99 accelerating road vehicles - Engineering 17.140.30 method - Part 1: M and N categories
BAS/TC 36 prBAS ISO 362-3:2021 ISO 362-3:2016, IDT Measurement of noise emitted by ko en 17.140.30 10.99 accelerating road vehicles - Engineering method - Part 3: Indoor testing M and N categories BAS/TC 36 prBAS ISO 4869-6:2021 ISO 4869-6:2019, IDT Acoustics - Hearing protectors - Part 6: ko en 13.340.20 10.99 Determination of sound attenuation of active noise reduction earmuffs
173 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 36 prBAS ISO 5128:2021 ISO 5128:1980, IDT Acoustics - Measurement of noise inside ko en 43.020, 10.99 motor vehicles 17.140.30 BAS/TC 36 prBAS ISO 5129:2021 ISO 5129:2001/Amd 1:2013, IDT; Acoustics - Measurement of sound ko en 49.020, 10.99 ISO 5129:2001, IDT pressure levels in the interior of aircraft 17.140.30 during flight BAS/TC 36 prBAS ISO 7196:2021 ISO 7196:1995, IDT Acoustics - Frequency-weighting ko en 17.140.01 10.99 characteristic for infrasound measurements BAS/TC 36 prBAS ISO 9296:2021 ISO 9296:2017, IDT Acoustics - Declared noise emission ko en 35.020, 10.99 values of information technology and 17.140.20 telecommunications equipment BAS/TC 36 prBAS ISO 9611:2021 ISO 9611:1996, IDT Acoustics - Characterization of sources ko en 17.140.20 10.99 of structure-borne sound with respect to sound radiation from connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted BAS/TC 36 prBAS EN 16475-7+A1:2021 EN 16475-7:2016+A1:2020, IDT Chimneys - Accessories - Part 7: Rain pr en 91.060.40 10.99 caps - Requirements and test methods
BAS/TC 36 prBAS EN 16516+A1:2021 EN 16516:2017+A1:2020, IDT Construction products: Assessment of pr en 13.040.20, 10.99 release of dangerous substances - 91.100.01 Determination of emissions into indoor air BAS/TC 36 prBAS EN 16475-1:2021 EN 16475-1:2020, IDT Chimneys - Accessories - Part 1: pr en 91.060.40 10.99 Chimney silencers - Requirements and test methods BAS/TC 36 prBAS EN 16475-6:2021 EN 16475-6:2020, IDT Chimneys - Accessories - Part 6: pr en 91.060.40 10.99 Access components - Requirements and test methods BAS/TC 36 prBAS EN ISO 12999-2:2021 EN ISO 12999-2:2020, IDT; ISO Acoustics - Determination and pr en 17.140.01, 10.99 12999-2:2020, IDT application of measurement 91.120.20 uncertainties in building acoustics - Part 2: Sound absorption BAS/TC 36 prBAS EN 17074:2021 EN 17074:2019, IDT Glass in building - Environmental pr en 81.040.20 10.99 product declaration - Product category rules for flat glass products
174 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 36 prBAS EN ISO 11200/A1:2021 EN ISO 11200:2014/A1:2020, Acoustics - Noise emitted by machinery pr en 17.140.20 10.99 IDT; ISO 11200:2014/Amd and equipment - Guidelines for the use 1:2018, IDT of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions - Amendment 1
BAS/TC 36 prBAS EN ISO 8970:2021 EN ISO 8970:2020, IDT; ISO Timber structures - Testing of joints pr en 91.080.20 10.99 8970:2020, IDT made with mechanical fasteners - Requirements for timber density BAS/TC 36 prBAS EN 131-4:2021 EN 131-4:2020, IDT Ladders - Part 4: Single or multiple pr en 97.145 10.99 hinge-joint ladders BAS/TC 36 prBAS EN ISO 12951:2021 EN ISO 12951:2020, IDT; ISO Textile floor coverings - Determination of pr en 97.150 10.99 12951:2020, IDT mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine BAS/TC 36 prBAS EN ISO 10581:2021 EN ISO 10581:2020, IDT; ISO Resilient floor coverings - pr en 97.150 10.99 10581:2019, IDT Homogeneous poly(vinyl chloride) floor covering - Specifications BAS/TC 36 prBAS EN ISO 9229:2021 EN ISO 9229:2020, IDT; ISO Thermal insulation - Vocabulary pr en 91.120.10, 10.99 9229:2020, IDT 27.220, 01.040.91, 01.040.27 BAS/TC 36 prBAS EN 16641:2021 EN 16641:2019, IDT Textile floor coverings - Guidelines for pr en 97.150 10.99 acceptable colour deviations BAS/TC 36 prBAS EN 15398:2021 EN 15398:2020, IDT Resilient, textile, laminate and modular pr en 97.150 10.99 mechanical locked floor coverings (MMF) - Floor covering standard symbols - Complementary element
BAS/TC 36 prBAS EN 235:2021 EN 235:2020, IDT Wallcoverings - Vocabulary and pr en 91.180, 10.99 symbols 01.080.20, 01.040.91 BAS/TC 36 prBAS EN 234:2021 EN 234:2019, IDT Wallcoverings in roll form - Specification pr en 91.180 10.99 for wallcoverings for subsequent decoration
175 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 36 prBAS EN ISO 11203/A1:2021 EN ISO 11203:2009/A1:2020, Acoustics - Noise emitted by machinery pr en 17.140.20 10.99 IDT; ISO 11203:1995/Amd and equipment - Determination of 1:2020, IDT emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 BAS/TC 36 prBAS EN 1269:2021 EN 1269:2019, IDT Textile floor coverings - Assessment of pr en 97.150 10.99 impregnations in needled floor coverings by means of a soiling test BAS/TC 36 prBAS EN 16475-4:2021 EN 16475-4:2020, IDT Chimneys - Accessories - Part 4: Flue pr en 91.060.40 10.99 dampers - Requirements and test methods BAS/TC 36 prBAS EN 17368:2021 EN 17368:2020, IDT Laminate floor coverings - pr en 97.150 10.99 Determination of impact resistance with small ball BAS/TC 36 prBAS EN 17317:2021 EN 17317:2020, IDT Resilient, textile, laminate and modular pr en 97.150 10.99 mechanical locked floor coverings - Light reflectance value (LRV) of a flooring surface BAS/TC 36 prBAS EN 1816:2021 EN 1816:2020, IDT Resilient floor coverings - Specification pr en 97.150 10.99 for homogeneous and heterogeneous smooth rubber floor coverings with foam backing BAS/TC 36 prBAS EN 1817:2021 EN 1817:2020, IDT Resilient floor coverings - Specification pr en 97.150 10.99 for homogeneous and heterogeneous smooth rubber floor coverings BAS/TC 36 prBAS EN 12199:2021 EN 12199:2020, IDT Resilient floor coverings - Specifications pr en 97.150 10.99 for homogeneous and heterogeneous relief rubber floor coverings
BAS/TC 36 prBAS EN 17396:2021 EN 17396:2020, IDT Resilient floor coverings - Quartz vinyl pr en 97.150 10.99 tiles - Specification BAS/TC 36 prBAS EN ISO 389-7:2021 EN ISO 389-7:2019, IDT; ISO Acoustics - Reference zero for the pr en 13.140 10.99 389-7:2019, IDT calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions
176 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 36 prBAS EN ISO 16283-2:2021 EN ISO 16283-2:2020, IDT; ISO Acoustics - Field measurement of sound pr en 91.120.20, 10.99 16283-2:2020, IDT insulation in buildings and of building 91.060.30 elements - Part 2: Impact sound insulation BAS/TC 36 prBAS EN ISO 16546:2021 EN ISO 16546:2020, IDT; ISO Thermal insulating products for building pr en 91.100.60 10.99 16546:2020, IDT applications - Determination of freeze- thaw resistance BAS/TC 36 prBAS EN ISO 29470:2021 EN ISO 29470:2020, IDT; ISO Thermal insulating products for building pr en 91.100.60 10.99 29470:2020, IDT applications - Determination of the apparent density BAS/TC 36 prBAS EN ISO 16534:2021 EN ISO 16534:2020, IDT; ISO Thermal insulating products for building pr en 91.100.60 10.99 16534:2020, IDT applications - Determination of compressive creep BAS/TC 36 prBAS EN 14366+A1:2021 EN 14366:2004+A1:2019, IDT Laboratory measurement of noise from pr en 91.140.80, 10.99 waste water installations 17.140.20 BAS/TC 36 prBAS EN 16809-1:2021 EN 16809-1:2019, IDT Thermal insulation products of buildings - pr en 91.100.60 10.99 In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation
BAS/TC 36 prBAS ISO 16817:2021 ISO 16817:2017, IDT Building environment design - Indoor ko en 91.040.01 10.99 environment - Design process for the visual environment BAS/TC 36 prBAS ISO 13006:2021 ISO 13006:2018, IDT Ceramic tiles - Definitions, classification, ko en 91.100.23, 10.99 characteristics and marking 01.040.91
BAS/TC 36 prBAS ISO 22389-2:2021 ISO 22389-2:2020, IDT Timber structures - Bending applications ko en 91.080.20 10.99 of I-beams - Part 2: Component performance and manufacturing requirements BAS/TC 36 prBAS ISO 5130:2021 ISO 5130:2019, IDT Acoustics - Measurements of sound ko en 43.020, 10.99 pressure level emitted by stationary road 17.140.30 vehicles BAS/TC 36 prBAS ISO 1763:2021 ISO 1763:2020, IDT Textile floor coverings - Determination of ko en 97.150 10.99 number of tufts and/or loops per unit length and per unit area
177 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 36 prBAS ISO 4918:2021 ISO 4918:2016, IDT Resilient, textile and laminate floor ko en 97.150, 10.99 coverings - Castor chair test 59.080.60 BAS/TC 36 prBAS ISO 6347:2021 ISO 6347:2017, IDT Textile floor coverings - Consumer ko en 97.150, 10.99 information 59.080.60, 97.020 BAS/TC 36 prBAS ISO 8375:2021 ISO 8375:2017, IDT Timber structures - Glued laminated ko en 91.080.20 10.99 timber - Test methods for determination of physical and mechanical properties
BAS/TC 36 prBAS ISO 26101:2021 ISO 26101:2017, IDT Acoustics - Test methods for the ko en 17.140.01 10.99 qualification of free-field environments BAS/TC 37 prBAS CEN/TS 16459:2021 CEN/TS 16459:2019, IDT External fire exposure of roofs and roof pr en 91.060.20, 10.99 coverings - Extended application of test 13.220.50 results from CEN/TS 1187 BAS/TC 37 prBAS EN ISO 1182:2021 EN ISO 1182:2020, IDT; ISO Reaction to fire tests for products - Non- pr en 91.100.01, 10.99 1182:2020, IDT combustibility test 13.220.50 BAS/TC 37 prBAS EN ISO 11925-2:2021 EN ISO 11925-2:2020, IDT; ISO Reaction to fire tests - Ignitability of pr en 13.220.50 10.99 11925-2:2020, IDT products subjected to direct impingement of flame - Part 2: Single- flame source test BAS/TC 37 prBAS EN 13823:2021 EN 13823:2020, IDT Reaction to fire tests for building pr en 91.100.01, 10.99 products - Building products excluding 91.060.01, floorings exposed to the thermal attack 13.220.50 by a single burning item BAS/TC 37 prBAS EN 1363-1:2021 EN 1363-1:2020, IDT Fire resistance tests - Part 1: General pr en 13.220.40, 10.99 requirements 13.220.50 BAS/TC 37 prBAS EN 13381-10:2021 EN 13381-10:2020, IDT Test methods for determining the pr en 91.080.13, 10.99 contribution to the fire resistance of 13.220.50 structural members - Part 10: Applied protection to solid steel bars in tension BAS/TC 37 prBAS EN 13381-1:2021 EN 13381-1:2020, IDT Test methods for determining the pr en 79.060.20, 10.99 contribution to the fire resistance of 13.220.50 structural members - Part 1: Horizontal protective membranes BAS/TC 37 prBAS CEN/TR 17524:2021 CEN/TR 17524:2020, IDT Fire safety engineering in Europe - pr en 13.220.01 10.99 Review of national requirements and application
178 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 37 prBAS EN 1366-12+A1:2021 EN 1366-12:2014+A1:2019, IDT Fire resistance tests for service pr en 91.140.30, 10.99 installations - Part 12: Non-mechanical 13.220.50 fire barrier for ventilation ductwork BAS/TC 37 prBAS EN 15269-1/Cor1:2021 EN 15269-1:2019/AC:2020, IDT Extended application of test results for pr en 91.060.50, 10.99 fire resistance and/or smoke control for 13.220.50 door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements BAS/TC 37 prBAS EN 1366-1+A1:2021 EN 1366-1:2014+A1:2020, IDT Fire resistance tests for service pr en 91.140.30, 10.99 installations - Part 1: Ventilation ducts 13.220.50 BAS/TC 37 prBAS ISO 20501:2021 ISO 20501:2019, IDT Fine ceramics (advanced ceramics, ko en 81.060.30 10.99 advanced technical ceramics) - Weibull statistics for strength data BAS/TC 37 prBAS ISO/TR 15655:2021 ISO/TR 15655:2020, IDT Fire resistance - Tests for thermo- ko en 13.220.40 10.99 physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
BAS/TC 37 prBAS ISO 26367-1:2021 ISO 26367-1:2019, IDT Guidelines for assessing the adverse ko en 13.220.01 10.99 environmental impact of fire effluents - Part 1: General BAS/TC 37 prBAS ISO 27447:2021 ISO 27447:2019, IDT Fine ceramics (advanced ceramics, ko en 81.060.30 10.99 advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials
BAS/TC 37 prBAS ISO/TR 17252:2021 ISO/TR 17252:2019, IDT Fire tests - Applicability of reaction to fire ko en 13.220.40, 10.99 tests to fire modelling and fire safety 13.220.50 engineering BAS/TC 37 prBAS ISO 22197-2:2021 ISO 22197-2:2019, IDT Fine ceramics (advanced ceramics, ko en 81.060.30 10.99 advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 2: Removal of acetaldehyde
179 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 37 prBAS ISO 22197-3:2021 ISO 22197-3:2019, IDT Fine ceramics (advanced ceramics, ko en 81.060.30 10.99 advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 3: Removal of toluene BAS/TC 37 prBAS ISO 18754:2021 ISO 18754:2020, IDT Fine ceramics (advanced ceramics, ko en 81.060.30 10.99 advanced technical ceramics) - Determination of density and apparent porosity BAS/TC 37 prBAS ISO 29903-1:2021 ISO 29903-1:2020, IDT Comparison of toxic gas data from ko en 13.220.01 10.99 different tests - Part 1: Guidance and requirements BAS/TC 38 prBAS EN ISO 20170:2021 EN ISO 20170:2019, IDT; ISO Geometrical product specifications pr en 17.040.40, 10.99 20170:2019, IDT (GPS) - Decomposition of geometrical 17.040.30, characteristics for manufacturing control 17.040.01
BAS/TC 38 prBAS EN ISO 25178-73:2021 EN ISO 25178-73:2019, IDT; ISO Geometrical product specifications pr en 17.040.40, 10.99 25178-73:2019, IDT (GPS) - Surface texture: Areal - Part 73: 01.040.17 Terms and definitions for surface defects on material measures BAS/TC 38 prBAS EN ISO 25178-607:2021 EN ISO 25178-607:2019, IDT; Geometrical product specifications pr en 17.040.20 10.99 ISO 25178-607:2019, IDT (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non- contact (confocal microscopy) instrumentss BAS/TC 38 prBAS EN ISO 25178-600:2021 EN ISO 25178-600:2019, IDT; Geometrical product specifications pr en 17.040.20 10.99 ISO 25178-600:2019, IDT (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods BAS/TC 38 prBAS EN ISO 16610-29:2021 EN ISO 16610-29:2020, IDT; ISO Geometrical product specifications pr en 17.040.20 10.99 16610-29:2020, IDT (GPS) - Filtration - Part 29: Linear profile filters: Wavelets
180 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 38 prBAS EN ISO 10360-5:2021 EN ISO 10360-5:2020, IDT; ISO Geometrical product specifications pr en 17.040.40, 10.99 10360-5:2020, IDT (GPS) - Acceptance and reverification 17.040.30 tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode BAS/TC 38 prBAS EN ISO 21204:2021 EN ISO 21204:2020, IDT; ISO Geometrical product specifications pr en 17.040.01 10.99 21204:2020, IDT (GPS) - Transition specification BAS/TC 38 prBAS EN ISO 16610-61/A1:2021 EN ISO 16610-61:2015/A1:2020, Geometrical product specification (GPS) pr en 17.040.40, 10.99 IDT; ISO 16610-61:2015/Amd - Filtration - Part 61: Linear areal filters - 17.040.20 1:2019, IDT Gaussian filters - Amendment 1
BAS/TC 38 prBAS EN ISO 8654/A1:2021 EN ISO 8654:2018/A1:2019, IDT; Jewellery - Colours of gold alloys - pr en 39.060 10.99 ISO 8654:2018/Amd 1:2019, IDT Definition, range of colours and designation - Amendment 1 BAS/TC 38 prBAS EN ISO 13385-2:2021 EN ISO 13385-2:2020, IDT; ISO Geometrical product specifications pr en 17.040.40, 10.99 13385-2:2020, IDT (GPS) - Dimensional measuring 17.040.30 equipment - Part 2: Design and metrological characteristics of calliper depth gauges BAS/TC 38 prBAS ISO 2859-2:2021 ISO 2859-2:2020, IDT Sampling procedures for inspection by ko en 03.120.30 10.99 attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection BAS/TC 38 prBAS ISO 5725-4:2021 ISO 5725-4:2020, IDT Accuracy (trueness and precision) of ko en 03.120.30, 10.99 measurement methods and results - 17.020 Part 4: Basic methods for the determination of the trueness of a standard measurement method BAS/TC 38 prBAS ISO 7870-3:2021 ISO 7870-3:2020, IDT Control charts - Part 3: Acceptance ko en 03.120.30 10.99 control charts BAS/TC 38 prBAS ISO 7870-1:2021 ISO 7870-1:2019, IDT Control charts - Part 1: General ko en 03.120.30 10.99 guidelines BAS/TC 38 prBAS ISO 15096:2021 ISO 15096:2020, IDT Jewellery and precious metals - ko en 39.060 10.99 Determination of high purity silver - Difference method using ICP-OES
181 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 38 prBAS ISO 15093:2021 ISO 15093:2020, IDT Jewellery and precious metals - ko en 39.060 10.99 Determination of high purity gold, platinum and palladium - Difference method using ICP-OES BAS/TC 39 prBAS EN ISO 6504-3:2021 EN ISO 6504-3:2019, IDT; ISO Paints and varnishes - Determination of pr en 87.040 10.99 6504-3:2019, IDT hiding power - Part 3: Determination of hiding power of paints for masonry, concrete and interior use BAS/TC 39 prBAS EN ISO 14713-2:2021 EN ISO 14713-2:2020, IDT; ISO Zinc coatings - Guidelines and pr en 91.080.17, 10.99 14713-2:2019, IDT recommendations for the protection 91.080.13, against corrosion of iron and steel in 91.080.10, structures - Part 2: Hot dip galvanizing 25.220.40 BAS/TC 39 prBAS EN ISO 17872:2021 EN ISO 17872:2019, IDT; ISO Paints and varnishes - Guidelines for pr en 87.040 10.99 17872:2019, IDT the introduction of scribe marks through coatings on metallic panels for corrosion testing BAS/TC 39 prBAS EN ISO 8044:2021 EN ISO 8044:2020, IDT; ISO Corrosion of metals and alloys - pr en 77.060, 10.99 8044:2020, IDT Vocabulary 01.040.77 BAS/TC 39 prBAS EN ISO 8504-1:2021 EN ISO 8504-1:2019, IDT; ISO Preparation of steel substrates before pr en 25.220.10 10.99 8504-1:2019, IDT application of paints and related products - Surface preparation methods - Part 1: General principles BAS/TC 39 prBAS EN ISO 8504-2:2021 EN ISO 8504-2:2019, IDT; ISO Preparation of steel substrates before pr en 25.220.10 10.99 8504-2:2019, IDT application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning
BAS/TC 39 prBAS EN 17243:2021 EN 17243:2020, IDT Cathodic protection of internal surfaces pr en 47.020.30, 10.99 of metallic tanks, structures, equipment, 77.060 and piping containing seawater
BAS/TC 39 prBAS EN ISO 11844-1:2021 EN ISO 11844-1:2020, IDT; ISO Corrosion of metals and alloys - pr en 77.060 10.99 11844-1:2020, IDT Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity
182 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 39 prBAS EN ISO 11844-2:2021 EN ISO 11844-2:2020, IDT; ISO Corrosion of metals and alloys - pr en 77.060 10.99 11844-2:2020, IDT Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres
BAS/TC 39 prBAS EN ISO 11844-3:2021 EN ISO 11844-3:2020, IDT; ISO Corrosion of metals and alloys - pr en 77.060 10.99 11844-3:2020, IDT Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity BAS/TC 39 prBAS EN ISO 21968:2021 EN ISO 21968:2019, IDT; ISO Non-magnetic metallic coatings on pr en 25.220.40 10.99 21968:2019, IDT metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
BAS/TC 39 prBAS EN ISO 11890-2:2021 EN ISO 11890-2:2020, IDT; ISO Paints and varnishes - Determination of pr en 87.040 10.99 11890-2:2020, IDT volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas- chromatographic method BAS/TC 39 prBAS EN ISO 3233-2:2021 EN ISO 3233-2:2019, IDT; ISO Paints and varnishes - Determination of pr en 87.040 10.99 3233-2:2019, IDT the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle BAS/TC 39 prBAS EN ISO 8502-6:2021 EN ISO 8502-6:2020, IDT; ISO Preparation of steel substrates before pr en 25.220.10 10.99 8502-6:2020, IDT application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of water soluble contaminants for analysis (Bresle method)
183 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 39 prBAS EN 927-7:2021 EN 927-7:2020, IDT Paints and varnishes - Coating materials pr en 87.040 10.99 and coating systems for exterior wood - Part 7: Assessment of knot staining resistance of wood coatings
BAS/TC 39 prBAS EN 927-11:2021 EN 927-11:2020, IDT Paints and varnishes - Coating materials pr en 87.040, 10.99 and coating systems for exterior wood - 85.040 Part 11: Assessment of air inclusions/microfoam in coating films
BAS/TC 39 prBAS EN ISO 787-13:2021 EN ISO 787-13:2019, IDT; ISO General methods of test for pigments pr en 87.060.10 10.99 787-13:2019, IDT and extenders - Part 13: Determination of water-soluble sulfates, chlorides and nitrates BAS/TC 39 prBAS EN ISO 787-15:2021 EN ISO 787-15:2019, IDT; ISO General methods of test for pigments pr en 87.060.10 10.99 787-15:2019, IDT and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types BAS/TC 39 prBAS EN ISO 8289-1:2021 EN ISO 8289-1:2020, IDT; ISO Vitreous and porcelain enamels - Low- pr en 25.220.50 10.99 8289-1:2020, IDT voltage test for detecting and locating defects - Part 1: Swab test for non- profiled surfaces BAS/TC 39 prBAS EN ISO 28721-1:2021 EN ISO 28721-1:2019, IDT; ISO Vitreous and porcelain enamels - Glass- pr en 25.220.50 10.99 28721-1:2019, IDT lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories BAS/TC 39 prBAS EN ISO 1524:2021 EN ISO 1524:2020, IDT; ISO Paints, varnishes and printing inks - pr en 87.040 10.99 1524:2020, IDT Determination of fineness of grind BAS/TC 39 prBAS EN ISO 13076:2021 EN ISO 13076:2019, IDT; ISO Paints and varnishes - Lighting and pr en 87.040 10.99 13076:2019, IDT procedure for visual assessments of coatings BAS/TC 39 prBAS EN ISO 15184:2021 EN ISO 15184:2020, IDT; ISO Paints and varnishes - Determination of pr en 87.040 10.99 15184:2020, IDT film hardness by pencil test BAS/TC 39 prBAS EN ISO 4625-1:2021 EN ISO 4625-1:2020, IDT; ISO Binders for paints and varnishes - pr en 87.060.20 10.99 4625-1:2020, IDT Determination of softening point - Part 1: Ring-and-ball method
184 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 39 prBAS EN 17393:2021 EN 17393:2020, IDT Thermal spraying - Tubular coating pr en 25.220.20 10.99 tensile test BAS/TC 39 prBAS EN ISO 19403-6:2021 EN ISO 19403-6:2020, IDT; ISO Paints and varnishes - Wettability - Part pr en 01.040.87 10.99 19403-6:2017, IDT 6: Measurement of dynamic contact angle BAS/TC 39 prBAS EN ISO 3668:2021 EN ISO 3668:2020, IDT; ISO Paints and varnishes - Visual pr en 87.040 10.99 3668:2017, IDT comparison of colour of paints BAS/TC 39 prBAS EN ISO 19403-4:2021 EN ISO 19403-4:2020, IDT; ISO Paints and varnishes - Wettability - Part pr en 01.040.87 10.99 19403-4:2017, IDT 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension BAS/TC 39 prBAS EN ISO 19403-5:2021 EN ISO 19403-5:2020, IDT; ISO Paints and varnishes - Wettability - Part pr en 01.040.87 10.99 19403-5:2017, IDT 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy BAS/TC 39 prBAS EN ISO 19403-7:2021 EN ISO 19403-7:2020, IDT; ISO Paints and varnishes - Wettability - Part pr en 01.040.87 10.99 19403-7:2017, IDT 7: Measurement of the contact angle on a tilt stage (roll-off angle) BAS/TC 39 prBAS EN ISO 19396-2:2021 EN ISO 19396-2:2020, IDT; ISO Paints and varnishes - Determination of pr en 87.040 10.99 19396-2:2017, IDT pH value - Part 2: pH electrodes with ISFET technology BAS/TC 39 prBAS EN ISO 19396-1:2021 EN ISO 19396-1:2020, IDT; ISO Paints and varnishes - Determination of pr en 87.040 10.99 19396-1:2017, IDT pH value - Part 1: pH electrodes with glass membrane BAS/TC 39 prBAS EN ISO 19403-1:2021 EN ISO 19403-1:2020, IDT; ISO Paints and varnishes - Wettability - Part pr en 87.040, 10.99 19403-1:2017, IDT 1: Terminology and general principles 01.040.87
BAS/TC 39 prBAS EN ISO 19403-2:2021 EN ISO 19403-2:2020, IDT; ISO Paints and varnishes - Wettability - Part pr en 01.040.87 10.99 19403-2:2017, IDT 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
185 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 39 prBAS EN ISO 19403-3:2021 EN ISO 19403-3:2020, IDT; ISO Paints and varnishes - Wettability - Part pr en 01.040.87 10.99 19403-3:2017, IDT 3: Determination of the surface tension of liquids using the pendant drop method BAS/TC 39 prBAS CEN/TS 927-8:2021 CEN/TS 927-8:2020, IDT Paints and varnishes - Coating materials pr en 87.040 10.99 and coating systems for exterior wood - Part 8: Determination of the adhesion on wood after water exposure by a double- X-cut test BAS/TC 39 prBAS EN ISO 3233-1:2021 EN ISO 3233-1:2019, IDT; ISO Paints and varnishes - Determination of pr en 87.040 10.99 3233-1:2019, IDT percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes principle BAS/TC 39 prBAS EN ISO 7539-10:2021 EN ISO 7539-10:2020, IDT; ISO Corrosion of metals and alloys - Stress pr en 77.060 10.99 7539-10:2020, IDT corrosion testing - Part 10: Reverse U- bend method BAS/TC 39 prBAS EN 13523-18:2021 EN 13523-18:2020, IDT Coil coated metals - Test methods - Part pr en 25.220.60 10.99 18: Resistance to staining BAS/TC 39 prBAS EN 13523-6:2021 EN 13523-6:2020, IDT Coil coated metals - Test methods - Part pr en 25.220.60 10.99 6: Adhesion after indentation (cupping test) BAS/TC 39 prBAS EN ISO 12944-5:2021 EN ISO 12944-5:2019, IDT; ISO Paints and varnishes - Corrosion pr en 87.020 10.99 12944-5:2019, IDT protection of steel structures by protective paint systems - Part 5: Protective paint systems BAS/TC 39 prBAS EN 13523-20:2021 EN 13523-20:2020, IDT Coil coated metals - Test methods - Part pr en 25.220.60 10.99 20: Foam adhesion BAS/TC 39 prBAS EN ISO 3262-1:2021 EN ISO 3262-1:2020, IDT; ISO Extenders - Specifications and methods pr en 87.060.10 10.99 3262-1:2020, IDT of test - Part 1: Introduction and general test methods BAS/TC 39 prBAS EN ISO 15091:2021 EN ISO 15091:2020, IDT; ISO Paints and varnishes - Determination of pr en 87.040 10.99 15091:2019, IDT electrical conductivity and resistance
BAS/TC 39 prBAS EN ISO 787-19:2021 EN ISO 787-19:2020, IDT; ISO General methods of test for pigments - pr en 87.060.10 10.99 787-19:2020, IDT Part 19: Determination of water-soluble nitrates (Salicylic acid method)
186 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 39 prBAS EN ISO 4629-3:2021 EN ISO 4629-3:2020, IDT; ISO Binders for paints and varnishes - pr en 87.060.20 10.99 4629-3:2018, IDT Determination of hydroxyl value - Part 3: Rapid test BAS/TC 40 psBAS EN 60204-1:2020 EN 60204-1:2018, IDT; IEC Safety of machinery - Electrical pv sr 29.020, 50.99 60204-1:2016, MOD equipment of machines - Part 1: 13.110 General requirements BAS/TC 40 psBAS EN ISO 13849-1:2020 EN ISO 13849-1:2015, IDT; ISO Safety of machinery - Safety-related pv bs 13.110 50.99 13849-1:2015, IDT parts of control systems - Part 1: General principles for design BAS/TC 40 psBAS EN ISO 12100:2020 EN ISO 12100:2010, IDT; ISO Safety of machinery - General principles pv sr 13.110 50.99 12100:2010, IDT for design - Risk assessment and risk reduction BAS/TC 40 psBAS EN 62061:2020 EN 62061:2005/A2:2015, IDT; Safety of machinery - Functional safety pv bs 29.020, 50.99 EN 62061:2005/A1:2013, IDT; of safety-related electrical, electronic 13.110, EN 62061:2005, IDT; IEC and programmable electronic control 25.040.99 62061:2005/AMD2:2015, IDT; systems IEC 62061:2005/AMD1:2012, IDT; IEC 62061:2005, IDT; EN 62061:2005/AC:2010, IDT BAS/TC 40 prBAS EN IEC 60204-11:2021 EN IEC 60204-11:2019, IDT; IEC Safety of machinery - Electrical pr en 29.020, 10.99 60204-11:2018, IDT equipment of machines - Part 11: 13.110 Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV BAS/TC 40 prBAS EN IEC 61496-3:2021 EN IEC 61496-3:2019, IDT; IEC Safety of machinery - Electro-sensitive pr en 13.110, 10.99 61496-3:2018, IDT protective equipment - Part 3: Particular 31.260 requirements for active opto-electronic protective devices responsive to diffuse Reflection (AOPDDR)
BAS/TC 40 prBAS EN IEC 61496-1:2021 EN IEC 61496-1:2020, IDT; IEC Safety of machinery - Electro-sensitive pr en 13.110, 10.99 61496-1:2020, IDT protective equipment - Part 1: General 29.260.99 requirements and tests BAS/TC 40 prBAS EN IEC 61496-2:2021 EN IEC 61496-2:2020, IDT; IEC Safety of machinery - Electro-sensitive pr en 13.110, 10.99 61496-2:2020, IDT protective equipment - Part 2: Particular 29.260.99 requirements for equipment using active opto-electronic protective devices (AOPDs)
187 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 40 prBAS EN 62745/A11:2021 EN 62745:2017/A11:2020, IDT Safety of machinery - Requirements for pr en 29.020, 10.99 cableless control systems of machinery 13.110, 35.100.01 BAS/TC 40 prBAS EN 16486+A1:2021 EN 16486:2014+A1:2020, IDT Machines for compacting waste pr en 43.160 10.99 materials or recyclable fractions - Compactors - Safety requirements BAS/TC 40 prBAS EN 12312-15:2021 EN 12312-15:2020, IDT Aircraft ground support equipment - pr en 49.100 10.99 Specific requirements - Part 15: Baggage and equipment tractors BAS/TC 40 prBAS EN ISO 11532:2021 EN ISO 11532:2020, IDT; ISO Aircraft ground equipment - Graphical pr en 49.100, 10.99 11532:2018, IDT symbols 01.080.20 BAS/TC 40 prBAS EN 12312-3+A1:2021 EN 12312-3:2017+A1:2020, IDT Aircraft ground support equipment - pr en 49.100 10.99 Specific requirements - Part 3: Conveyor belt vehicles BAS/TC 40 prBAS ISO 8573-5:2021 ISO 8573-5:2001, IDT Compressed air - Part 5: Test methods ko en 71.100.20 10.99 for oil vapour and organic solvent content BAS/TC 40 prBAS ISO 8573-9:2021 ISO 8573-9:2004, IDT Compressed air - Part 9: Test methods ko en 71.100.20 10.99 for liquid water content BAS/TC 40 prBAS ISO 8573-8:2021 ISO 8573-8:2004, IDT Compressed air - Part 8: Test methods ko en 71.100.20 10.99 for solid particle content by mass concentration BAS/TC 40 prBAS ISO 12500-1:2021 ISO 12500-1:2007, IDT Filters for compressed air - Test ko en 71.100.20, 10.99 methods - Part 1: Oil aerosols 23.100.60 BAS/TC 40 prBAS ISO 12500-2:2021 ISO 12500-2:2007, IDT Filters for compressed air - Test ko en 71.100.20, 10.99 methods - Part 2: Oil vapours 23.100.60 BAS/TC 40 prBAS ISO 12500-3:2021 ISO 12500-3:2009, IDT Filters for compressed air - Test ko en 23.100.60 10.99 methods - Part 3: Particulates BAS/TC 40 prBAS ISO 8573-1:2021 ISO 8573-1:2010, IDT Compressed air - Part 1: Contaminants ko en 71.100.20 10.99 and purity classes BAS/TC 40 prBAS ISO 12500-4:2021 ISO 12500-4:2009, IDT Filters for compressed air - Methods of ko en 23.100.60 10.99 test - Part 4: Water BAS/TC 40 prBAS ISO 8573-2:2021 ISO 8573-2:2018, IDT Compressed air - Contaminant ko en 71.100.20 10.99 measurement - Part 2: Oil aerosol content BAS/TC 40 prBAS ISO 8573-4:2021 ISO 8573-4:2019, IDT Compressed air - Contaminant ko en 71.100.20 10.99 measurement - Part 4: Particle content
188 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 40 prBAS ISO 18740:2021 ISO 18740:2016, IDT Turbocompressors - Performance test ko en 23.140 10.99 code - Simplified acceptance test BAS/TC 40 prBAS ISO 1217:2021 ISO 1217:2009, IDT Displacement compressors - ko en 23.140 10.99 Acceptance tests BAS/TC 40 prBAS ISO 1217/A1:2021 ISO 1217:2009/Amd 1:2016, IDT Calculation of isentropic efficiency and ko en 23.140 10.99 relationship with specific energy BAS/TC 40 prBAS ISO 5393:2021 ISO 5393:2017, IDT Rotary tools for threaded fasteners - ko en 25.140.10 10.99 Performance test method BAS/TC 40 prBAS ISO 13379-2:2021 ISO 13379-2:2015, IDT Condition monitoring and diagnostics of ko en 17.160 10.99 machines - Data interpretation and diagnostics techniques - Part 2: Data- driven applications BAS/TC 40 prBAS ISO 16079-1:2021 ISO 16079-1:2017, IDT Condition monitoring and diagnostics of ko en 27.180 10.99 wind turbines - Part 1: General guidelines BAS/TC 40 prBAS ISO 18434-1:2021 ISO 18434-1:2008, IDT Condition monitoring and diagnostics of ko en 17.160 10.99 machines - Thermography - Part 1: General procedures BAS/TC 40 prBAS ISO 18095:2021 ISO 18095:2018, IDT Condition monitoring and diagnostics of ko en 29.180 10.99 power transformers BAS/TC 40 prBAS ISO 18129:2021 ISO 18129:2015, IDT Condition monitoring and diagnostics of ko en 17.160 10.99 machines - Approaches for performance diagnosis BAS/TC 40 prBAS ISO 19283:2021 ISO 19283:2020, IDT Condition monitoring and diagnostics of ko en 27.140, 10.99 machines - Hydroelectric generating 17.160 units BAS/TC 40 prBAS ISO 16079-2:2021 ISO 16079-2:2020, IDT Condition monitoring and diagnostics of ko en 27.180 10.99 wind turbines - Part 2: Monitoring the drivetrain BAS/TC 40 prBAS ISO 14830-1:2021 ISO 14830-1:2019, IDT Condition monitoring and diagnostics of ko en 17.160 10.99 machine systems - Tribology-based monitoring and diagnostics - Part 1: General requirements and guidelines BAS/TC 40 prBAS ISO 16092-2:2021 ISO 16092-2:2019, IDT Machine tools safety - Presses - Part 2: ko en 25.080.01 10.99 Safety requirement for mechanical presses
189 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 40 prBAS ISO 16092-4:2021 ISO 16092-4:2019, IDT Machine tools safety - Presses - Part 4: ko en 25.080.01 10.99 Safety requirements for pneumatic presses BAS/TC 40 prBAS ISO 5982:2021 ISO 5982:2019, IDT Mechanical vibration and shock - Range ko en 13.160 10.99 of idealized values to characterize human biodynamic response under whole-body vibration BAS/TC 40 prBAS ISO 21940-11:2021 ISO 21940-11:2016, IDT Mechanical vibration - Rotor balancing - ko en 21.120.40 10.99 Part 11: Procedures and tolerances for rotors with rigid behaviour BAS/TC 40 prBAS ISO 21940-23:2021 ISO 21940-23:2012, IDT Mechanical vibration - Rotor balancing - ko en 21.120.40 10.99 Part 23: Enclosures and other protective measures for the measuring station of balancing machines BAS/TC 40 prBAS ISO 21940-13:2021 ISO 21940-13:2012, IDT Mechanical vibration - Rotor balancing - ko en 21.120.40 10.99 Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors BAS/TC 40 prBAS ISO 21940-21:2021 ISO 21940-21:2012, IDT Mechanical vibration - Rotor balancing - ko en 21.120.40 10.99 Part 21: Description and evaluation of balancing machines BAS/TC 40 prBAS ISO 21940-32:2021 ISO 21940-32:2012, IDT Mechanical vibration - Rotor balancing - ko en 21.120.40 10.99 Part 32: Shaft and fitment key convention BAS/TC 40 prBAS ISO 21940-1:2021 ISO 21940-1:2019, IDT Mechanical vibration - Rotor balancing - ko en 21.120.40 10.99 Part 1: Introduction BAS/TC 40 prBAS ISO 20816-4:2021 ISO 20816-4:2018, IDT Mechanical vibration - Measurement ko en 27.040, 10.99 and evaluation of machine vibration - 17.160 Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings BAS/TC 40 prBAS ISO 20816-8:2021 ISO 20816-8:2018, IDT Mechanical vibration - Measurement ko en 17.160 10.99 and evaluation of machine vibration - Part 8: Reciprocating compressor systems BAS/TC 40 prBAS ISO 20816-9:2021 ISO 20816-9:2020, IDT Mechanical vibration - Measurement ko en 17.160 10.99 and evaluation of machine vibration - Part 9: Gear units
190 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 40 prBAS ISO 1985:2021 ISO 1985:2015, IDT Machine tools - Test conditions for ko en 25.080.50 10.99 surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy
BAS/TC 40 prBAS ISO 11090-2:2021 ISO 11090-2:2014, IDT Test conditions for die sinking electro- ko en 25.120.40 10.99 discharge machines (die sinking EDM) - Testing of the accuracy - Part 2: Double- column machines (slide-head type)
BAS/TC 40 prBAS ISO 13041-1:2021 ISO 13041-1:2020, IDT Test conditions for numerically ko en 25.080.10, 10.99 controlled turning machines and turning 25.040.20 centres - Part 1: Geometric tests for machines with horizontal workholding spindle(s) BAS/TC 40 prBAS ISO 13041-2:2021 ISO 13041-2:2020, IDT Test conditions for numerically ko en 25.040.20 10.99 controlled turning machines and turning centres - Part 2: Geometric tests for machines with a vertical workholding spindle BAS/TC 40 prBAS ISO 17543-1:2021 ISO 17543-1:2020, IDT Machine tools - Test conditions for ko en 25.040.10, 10.99 universal spindle heads - Part 1: 25.080.20, Accessory heads for machines with 25.040.20 horizontal spindle (horizontal Z-axis) BAS/TC 40 prBAS ISO 6481:2021 ISO 6481:2019, IDT Test conditions for vertical surface type ko en 25.080.30 10.99 broaching machines - Testing of accuracy BAS/TC 40 prBAS ISO 3875:2021 ISO 3875:2020, IDT Machine tools - Test conditions for ko en 25.080.50 10.99 external cylindrical centreless grinding machines - Testing of the accuracy BAS/TC 40 prBAS ISO 6480:2021 ISO 6480:2019, IDT Test conditions for horizontal internal ko en 25.080.30 10.99 type broaching machines - Testing of accuracy BAS/TC 40 prBAS ISO 6779:2021 ISO 6779:2019, IDT Test conditions for vertical internal type ko en 25.080.30 10.99 broaching machines - Testing of accuracy
191 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 40 prBAS ISO 2772:2021 ISO 2772:2019, IDT Test conditions for box type vertical ko en 25.080.40 10.99 drilling machines - Testing of the accuracy BAS/TC 40 prBAS ISO 19744:2021 ISO 19744:2020, IDT Test conditions for numerically ko en 25.080.30, 10.99 controlled broaching machines - Testing 25.040.20 of accuracy - Vertical surface type broaching machines BAS/TC 40 prBAS ISO 10102:2021 ISO 10102:2018, IDT Assembly tools for screws and nuts - ko en 25.140.30 10.99 Double-headed open-ended engineers' wrenches - Outside dimensions BAS/TC 40 prBAS ISO 10104:2021 ISO 10104:2018, IDT Assembly tools for screws and nuts - ko en 25.140.30 10.99 Double-headed box wrenches, deep offset and modified offset - Outside dimensions BAS/TC 40 prBAS ISO 21982:2021 ISO 21982:2020, IDT Assembly tools for screws and nuts - ko en 25.140.30 10.99 Ratcheting wrenches - Technical requirements BAS/TC 40 prBAS ISO 5611-2:2021 ISO 5611-2:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 2: Style F BAS/TC 40 prBAS ISO 5611-3:2021 ISO 5611-3:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 3: Style G BAS/TC 40 prBAS ISO 5611-4:2021 ISO 5611-4:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 4: Style J BAS/TC 40 prBAS ISO 5611-5:2021 ISO 5611-5:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 5: Style K BAS/TC 40 prBAS ISO 5611-6:2021 ISO 5611-6:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 6: Style L BAS/TC 40 prBAS ISO 5611-7:2021 ISO 5611-7:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 7: Style R BAS/TC 40 prBAS ISO 5611-8:2021 ISO 5611-8:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 8: Style S BAS/TC 40 prBAS ISO 5611-9:2021 ISO 5611-9:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 9: Style T BAS/TC 40 prBAS ISO 5611-10:2021 ISO 5611-10:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 10: Style U BAS/TC 40 prBAS ISO 5611-11:2021 ISO 5611-11:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 11: Style W
192 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 40 prBAS ISO 5611-12:2021 ISO 5611-12:2015, IDT Cartridges, type A, for indexable inserts - ko en 25.100.01 10.99 Part 12: Style Y BAS/TC 40 prBAS ISO 2780:2021 ISO 2780:2018, IDT Milling cutters with tenon drive - ko en 25.100.20 10.99 Interchangeability dimensions for cutter arbors - Metric series BAS/TC 40 prBAS ISO 11901-2:2021 ISO 11901-2:2018, IDT Tools for pressing - Gas springs - Part ko en 25.120.10 10.99 2: Specification of accessories BAS/TC 40 prBAS ISO 20928:2021 ISO 20928:2018, IDT Tools for pressing - Spring plungers with ko en 25.120.10 10.99 helicoidal compression steel spring or gas spring BAS/TC 40 prBAS ISO 20929:2021 ISO 20929:2018, IDT Tools for pressing - Heel guidings in ko en 25.120.10 10.99 large stamping and forming dies BAS/TC 40 prBAS ISO 21223:2021 ISO 21223:2019, IDT Tools for pressing - Vocabulary ko en 01.040.25, 10.99 25.120.10 BAS/TC 40 prBAS ISO 12165:2021 ISO 12165:2019, IDT Tools for moulding - Components of ko en 25.120.30, 10.99 compression and injection moulds and 01.040.25 diecasting dies - List of equivalent terms and symbols BAS/TC 40 prBAS ISO 9182-3:2021 ISO 9182-3:2020, IDT Tools for pressing - Guide pillars - Part ko en 25.120.10 10.99 3: Type B, end-locking pillars BAS/TC 40 prBAS ISO 9182-4:2021 ISO 9182-4:2020, IDT Tools for pressing - Guide pillars - Part ko en 25.120.10 10.99 4: Type C, pillars with taper lead and bush BAS/TC 40 prBAS ISO 9182-5:2021 ISO 9182-5:2020, IDT Tools for pressing - Guide pillars - Part ko en 25.120.10 10.99 4: Type D, end-locking pillars with flange
BAS/TC 40 prBAS ISO 525:2021 ISO 525:2020, IDT Bonded abrasive products - Shape ko en 25.100.70 10.99 types, designation and marking BAS/TC 40 prBAS ISO 22917:2021 ISO 22917:2016, IDT Precision superabrasives - Limit ko en 25.100.70 10.99 deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride BAS/TC 40 prBAS ISO 21538:2021 ISO 21538:2016, IDT Blanks for superabrasive cutting-off ko en 25.100.70 10.99 wheels - Mounting and fixing bores - Building construction and civil engineering
193 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 40 prBAS ISO 14955-4:2021 ISO 14955-4:2019, IDT Machine tools - Environmental ko en 25.080.01 10.99 evaluation of machine tools - Part 4: Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency BAS/TC 40 prBAS ISO 14955-1:2021 ISO 14955-1:2017, IDT Machine tools - Environmental ko en 25.080.01 10.99 evaluation of machine tools - Part 1: Design methodology for energy-efficient machine tools BAS/TC 40 prBAS ISO 14955-5:2021 ISO 14955-5:2020, IDT Machine tools - Environmental ko en 25.080.01 10.99 evaluation of machine tools - Part 5: Principles for testing woodworking machine tools with respect to energy supplied BAS/TC 40 prBAS ISO 14955-3:2021 ISO 14955-3:2020, IDT Machine tools - Environmental ko en 25.080.01 10.99 evaluation of machine tools - Part 3: Principles for testing metal-cutting machine tools with respect to energy efficiency BAS/TC 40 prBAS ISO 16084:2021 ISO 16084:2017, IDT Balancing of rotating tools and tool ko en 25.100.01, 10.99 systems 21.120.40 BAS/TC 40 prBAS ISO 16063-45:2021 ISO 16063-45:2017, IDT Methods for the calibration of vibration ko en 17.160 10.99 and shock transducers - Part 45: In-situ calibration of transducers with built in calibration coil BAS/TC 40 prBAS ISO 16063-44:2021 ISO 16063-44:2018, IDT Methods for the calibration of vibration ko en 17.160 10.99 and shock transducers - Part 44: Calibration of field vibration calibrators BAS/TC 40 prBAS ISO 7626-5:2021 ISO 7626-5:2019, IDT Mechanical vibration and shock - ko en 17.160 10.99 Experimental determination of mechanical mobility - Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
194 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 40 prBAS ISO 16063-34:2021 ISO 16063-34:2019, IDT Methods for the calibration of vibration ko en 17.160 10.99 and shock transducers - Part 34: Testing of sensitivity at fixed temperatures BAS/TC 41 prBAS EN ISO 11117:2021 EN ISO 11117:2019, IDT; ISO Gas cylinders - Valve protection caps pr en 23.020.30, 10.99 11117:2019, IDT and guards - Design, construction and 11.040.10 tests BAS/TC 41 prBAS EN ISO 10961:2021 EN ISO 10961:2019, IDT; ISO Gas cylinders - Cylinder bundles - pr en 23.020.35 10.99 10961:2019, IDT Design, manufacture, testing and inspection BAS/TC 41 prBAS EN 17339:2021 EN 17339:2020, IDT Transportable gas cylinders - Fully pr en 23.020.35 10.99 wrapped carbon composite cylinders and tubes for hydrogen BAS/TC 41 prBAS EN 17533:2021 EN 17533:2020, IDT Gaseous hydrogen - Cylinders and pr en 71.100.20, 10.99 tubes for stationary storage 23.020.30 BAS/TC 41 prBAS EN ISO 11118/A1:2021 EN ISO 11118:2015/A1:2020, Gas cylinders - Non-refillable metallic pr en 23.020.35 10.99 IDT; ISO 11118:2015/Amd gas cylinders - Specification and test 1:2019, IDT methods - Amendment 1 BAS/TC 41 prBAS EN ISO 11114-1:2021 EN ISO 11114-1:2020, IDT; ISO Gas cylinders - Compatibility of cylinder pr en 23.020.35 10.99 11114-1:2020, IDT and valve materials with gas contents - Part 1: Metallic materials BAS/TC 41 prBAS EN ISO 16148/A1:2021 EN ISO 16148:2016/A1:2020, Gas cylinders - Refillable seamless steel pr en 23.020.35 10.99 IDT; ISO 16148:2016/Amd gas cylinders and tubes - Acoustic 1:2020, IDT emission examination (AT) and follow- up ultrasonic examination (UT) for periodic inspection and testing - Amendment 1 BAS/TC 41 prBAS EN ISO 17871:2021 EN ISO 17871:2020, IDT; ISO Gas cylinders - Quick-release cylinder pr en 23.020.35, 10.99 17871:2020, IDT valves - Specification and type testing 23.060.40 BAS/TC 41 prBAS EN ISO 16964:2021 EN ISO 16964:2020, IDT; ISO Gas cylinders - Flexible hoses pr en 23.020.35, 10.99 16964:2019, IDT assemblies - Specification and testing 83.140.40 BAS/TC 41 prBAS EN ISO 22109:2021 EN ISO 22109:2020, IDT; ISO Industrial valves - Gearbox for valves pr en 23.060.01 10.99 22109:2020, IDT BAS/TC 41 prBAS EN ISO 8659:2021 EN ISO 8659:2020, IDT; ISO Thermoplastics valves - Fatigue pr en 83.140.30, 10.99 8659:2020, IDT strength - Test method 23.060.01 BAS/TC 41 prBAS EN 16767:2021 EN 16767:2020, IDT Industrial valves - Metallic check valves pr en 23.060.50 10.99
195 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 41 prBAS EN 12641-2:2021 EN 12641-2:2019, IDT Intermodal loading units and commercial pr en 55.180.10 10.99 vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders
BAS/TC 41 prBAS EN 12640:2021 EN 12640:2019, IDT Intermodal loading units and commercial pr en 55.180.99 10.99 vehicles - Lashing points for cargo securing - Minimum requirements and testing BAS/TC 41 prBAS EN 12641-1:2021 EN 12641-1:2019, IDT Intermodal loading units and commercial pr en 55.180.10 10.99 vehicles - Tarpaulins - Part 1: Minimum requirements BAS/TC 41 prBAS EN ISO 17268:2021 EN ISO 17268:2020, IDT; ISO Gaseous hydrogen land vehicle pr en 71.100.20, 10.99 17268:2020, IDT refuelling connection devices 43.180 BAS/TC 41 prBAS EN ISO 23208/A1:2021 EN ISO 23208:2019/A1:2020, Cryogenic vessels - Cleanliness for pr en 23.020.40 10.99 IDT; ISO 23208:2017/Amd cryogenic service - Amendment 1 1:2020, IDT BAS/TC 41 prBAS EN 12953-5:2021 EN 12953-5:2020, IDT Shell boilers - Part 5: Inspection during pr en 27.100, 10.99 construction, documentation and 27.060.30 marking of pressure parts of the boiler BAS/TC 41 prBAS ISO 1496-3:2021 ISO 1496-3:2019, IDT Series 1 freight containers - ko en 55.180.10 10.99 Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk BAS/TC 41 prBAS ISO 1161:2021 ISO 1161:2016, IDT Series 1 freight containers - Corner and ko en 55.180.10 10.99 intermediate fittings - Specifications
BAS/TC 41 prBAS ISO 1496-5:2021 ISO 1496-5:2018, IDT Series 1 freight containers - ko en 55.180.10 10.99 Specification and testing - Part 5: Platform and platform-based containers
BAS/TC 41 prBAS ISO 3874:2021 ISO 3874:2017, IDT Series 1 freight containers - Handling ko en 55.180.10 10.99 and securing BAS/TC 41 prBAS ISO/TR 15069:2021 ISO/TR 15069:2018, IDT Series 1 freight containers - Handling ko en 55.180.10 10.99 and securing - Rationale for ISO 3874:2017, Annexes A to E BAS/TC 41 prBAS ISO 18185-3:2021 ISO 18185-3:2015, IDT Freight containers - Electronic seals - ko en 55.180.10 10.99 Part 3: Environmental characteristics
196 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 41 prBAS ISO 1496-2:2021 ISO 1496-2:2018, IDT Series 1 freight containers - ko en, en 55.180.10 10.99 Specification and testing - Part 2: Thermal containers BAS/TC 41 prBAS ISO 668:2021 ISO 668:2020, IDT Series 1 freight containers - ko en 55.180.10 10.99 Classification, dimensions and ratings BAS/TC 41 prBAS EN 14564:2021 EN 14564:2019, IDT Tanks for transport of dangerous goods - pv en 13.300, 10.99 Terminology 23.020.20, 01.040.23, 01.040.13 BAS/TC 42 psBAS EN 716-1+Cor1:2020 EN 716-1:2017+AC:2019, IDT Furniture - Children's cots and folding pv bs,en 97.140, 50.99 cots for domestic use - Part 1: Safety 97.190 requirements BAS/TC 42 prBAS EN 527-2+A1:2020 EN 527-2:2016+A1:2019, IDT Office furniture - Work tables - Part 2: pv bs,en 97.140 10.99 Safety, strength and durability requirements BAS/TC 42 psBAS EN 14342:2020 EN 14342:2013, IDT Wood flooring and parquet - pv sr,en 97.150, 50.99 Characteristics, evaluation of conformity 79.080 and marking BAS/TC 42 psBAS EN 13489:2020 EN 13489:2017, IDT Wood-flooring and parquet - Multi-layer pv sr,en 79.080 50.99 parquet elements BAS/TC 42 prBAS EN 1335-1:2021 EN 1335-1:2020, IDT Office furniture - Office work chair - Part pr en 97.140 10.99 1: Dimensions - Determination of dimensions BAS/TC 42 prBAS EN 13150:2021 EN 13150:2020, IDT Workbenches for laboratories in pr en 71.040.10 10.99 educational institutions - Dimensions, safety and durability requirements and test methods BAS/TC 42 prBAS EN 1130:2021 EN 1130:2019, IDT Children's furniture - Cribs - Safety pr en 97.140, 10.99 requirements and test methods 97.190 BAS/TC 42 prBAS EN 14128:2021 EN 14128:2020, IDT Durability of wood and wood-based pr en 79.040, 10.99 products - Efficacy criteria for curative 71.100.50 wood preservatives as determined by biological tests BAS/TC 42 prBAS EN 84:2021 EN 84:2020, IDT Durability of wood and wood-based pr en 71.100.50 10.99 products - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
197 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 42 prBAS EN ISO 19085-9:2021 EN ISO 19085-9:2020, IDT; ISO Woodworking machines - Safety - Part pr en 13.110, 10.99 19085-9:2019, IDT 9: Circular saw benches (with and 79.120.10 without sliding table) BAS/TC 42 prBAS EN ISO 19085-13:2021 EN ISO 19085-13:2020, IDT; ISO Woodworking machines - Safety - Part pr en 13.110, 10.99 19085-13:2020, IDT 13: Multi-blade rip sawing machines with 79.120.10 manual loading and/or unloading BAS/TC 42 prBAS EN ISO 19085-11:2021 EN ISO 19085-11:2020, IDT; ISO Woodworking machines - Safety - Part pr en 13.110, 10.99 19085-11:2020, IDT 11: Combined machines 79.120.10 BAS/TC 42 prBAS EN 1390:2021 EN 1390:2020, IDT Wood preservatives - Determination of pr en 71.100.50 10.99 the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method BAS/TC 42 prBAS EN 73:2021 EN 73:2020, IDT Durability of wood and wood-based pr en 71.100.50 10.99 products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure BAS/TC 42 prBAS EN 12404:2021 EN 12404:2020, IDT Durability of wood and wood-based pr en 71.100.50 10.99 products - Assessment of the effectiveness of masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray - Laboratory method BAS/TC 42 prBAS EN 1534:2021 EN 1534:2020, IDT Wood flooring and parquet - pr en 91.060.30, 10.99 Determination of resistance to 79.080 indentation - Test method BAS/TC 42 prBAS EN 13629:2021 EN 13629:2020, IDT Wood flooring - Solid individual and pre- pr en 91.060.30, 10.99 assembled hardwood boards 79.080 BAS/TC 42 prBAS EN ISO 536:2021 EN ISO 536:2020, IDT; ISO Paper and board - Determination of pr en 85.060 10.99 536:2019, IDT grammage BAS/TC 42 prBAS CEN/TS 17497:2021 CEN/TS 17497:2020, IDT Pulp, paper and paperboard - pr en 85.060 10.99 Determination of bisphenol A in extracts from paper and paperboard BAS/TC 42 prBAS EN 14915+A2:2021 EN 14915:2013+A2:2020, IDT Solid wood panelling and cladding - pr en 79.080 10.99 Characteristics, requirements and marking BAS/TC 42 prBAS CEN/TR 17538:2021 CEN/TR 17538:2020, IDT Furniture - Common test equipment - pr en 97.140 10.99 Test foams and mattresses
198 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 43 prBAS EN 17250:2021 EN 17250:2020, IDT Foodstuffs - Determination of ochratoxin pr en 67.140.30, 10.99 A in spices, liquorice, cocoa and cocoa 67.220.10 products by IAC clean-up and HPLC- FLD BAS/TC 43 prBAS EN 17251:2021 EN 17251:2020, IDT Foodstuffs - Determination of ochratoxin pr en 67.120.10 10.99 A in pork meat and derived products by IAC clean-up and HPLC-FLD
BAS/TC 43 prBAS EN 17252:2021 EN 17252:2020, IDT Foodstuffs - Determination of pr en 67.060 10.99 phomopsin A in lupin seeds and lupin derived products by HPLC-MS/MS BAS/TC 43 prBAS EN 17279:2021 EN 17279:2019, IDT Foodstuffs - Multimethod for the pr en 67.050 10.99 screening of aflatoxin B1, deoxynivalenol, fumonisin B1 and B2, ochratoxin A, T-2 toxin, HT-2 toxin and zearalenone in foodstuffs, excluding foods for infants and young children, by LC-MS/MS BAS/TC 43 prBAS EN 17280:2021 EN 17280:2019, IDT Foodstuffs - Determination of pr en 67.060 10.99 zearalenone and trichothecenes including deoxynivalenol and its acetylated derivatives (3-acetyl- deoxynivalenol and 15-acetyl- deoxynivalenol), nivalenol T-2 toxin and HT-2 toxin in cereals and cereal products by LC-MS/MS BAS/TC 43 prBAS EN 17266:2021 EN 17266:2019, IDT Foodstuffs - Determination elements pr en 67.120.30 10.99 and their chemical species - Determination of organomercury in seafood by elemental mercury analysis
BAS/TC 43 prBAS EN ISO 18862:2021 EN ISO 18862:2019; ISO Coffee and coffee products - pr en 67.140.20 10.99 18862:2016, IDT Determination of acrylamide - Methods using HPLC-MS/MS and GC-MS after derivatization
199 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 43 prBAS EN ISO 21572:2021 EN ISO 21572:2019, IDT; ISO Foodstuffs - Molecular biomarker pr en 67.050 10.99 21572:2019, IDT analysis - Immunochemical methods for the detection and quantification of proteins BAS/TC 43 prBAS EN ISO 16297:2021 EN ISO 16297:2020, IDT; ISO Milk - Bacterial count - Protocol for the pr en 67.100.10 10.99 16297:2020, IDT evaluation of alternative methods BAS/TC 43 prBAS EN ISO 15151:2021 EN ISO 15151:2020; ISO Milk, milk products, infant formula and pr en 67.100.10 10.99 15151:2018, IDT adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma atomic emission spectrometry (ICP-AES) method BAS/TC 43 prBAS EN ISO 20647:2021 EN ISO 20647:2020; ISO Infant formula and adult nutritionals - pr en 67.050 10.99 20647:2015, IDT Determination of total iodine - Inductively coupled plasma mass spectrometry (ICP-MS) BAS/TC 43 prBAS EN ISO 16958:2021 EN ISO 16958:2020; ISO Milk, milk products, infant formula and pr en 67.100.10 10.99 16958:2015, IDT adult nutritionals - Determination of fatty acids composition - Capillary gas chromatographic method BAS/TC 43 prBAS EN ISO 21424:2021 EN ISO 21424:2020; ISO Milk, milk products, infant formula and pr en 67.100.10 10.99 21424:2018, IDT adult nutritionals - Determination of minerals and trace elements - Inductively coupled plasma mass spectrometry (ICP-MS) method BAS/TC 43 prBAS EN 14103:2021 EN 14103:2020, IDT Fat and oil derivatives - Fatty Acid pr en 67.200.10 10.99 Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents BAS/TC 43 prBAS EN ISO 665:2021 EN ISO 665:2020, IDT; ISO Oilseeds - Determination of moisture pr en 67.200.20 10.99 665:2020, IDT and volatile matter content BAS/TC 43 prBAS EN ISO 3657:2021 EN ISO 3657:2020, IDT; ISO Animal and vegetable fats and oils - pr en 67.200.10 10.99 3657:2020, IDT Determination of saponification value
200 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 43 prBAS EN 17270:2021 EN 17270:2019, IDT Animal feeding stuffs: Methods of pr en 71.040.50, 10.99 sampling and analysis - Determination 65.120 of theobromine in feed materials and compound feed, including cocoa derived ingredients, by liquid chromatography
BAS/TC 43 prBAS EN 17256:2021 EN 17256:2019, IDT Animal feeding stuffs: Methods of pr en 71.040.40, 10.99 sampling and analysis - Determination 65.120 of ergot alkaloids and tropane alkaloids in feed materials and compound feeds by LC-MS/MS BAS/TC 43 prBAS EN 17194:2021 EN 17194:2019, IDT Animal feeding stuffs: Methods of pr en 65.120 10.99 sampling and analysis - Determination of Deoxynivalenol, Aflatoxin B1, Fumonisin B1 & B2, T-2 & HT-2 toxins, Zearalenone and Ochratoxin A in feed materials and compound feed by LC- MS/MS BAS/TC 43 prBAS CEN/TS 17455:2021 CEN/TS 17455:2020, IDT Animal feeding stuffs - Methods of pr en 71.040.50, 10.99 sampling and analysis - Performance 71.040, criteria for single laboratory validated 65.120 and ring-trial validated methods of analysis for the determination of mycotoxins BAS/TC 43 prBAS EN 15741:2021 EN 15741:2020, IDT Animal feeding stuffs: Methods of pr en 65.120 10.99 sampling and analysis - Determination of OCPs and PCBs by GC-MS BAS/TC 43 prBAS EN 15742:2021 EN 15742:2020, IDT Animal feeding stuffs: Methods of pr en 65.120 10.99 sampling and analysis - Determination of OCPs by GC-ECD BAS/TC 43 prBAS EN 16215:2021 EN 16215:2020, IDT Animal feeding stuffs: Methods of pr en 65.120 10.99 sampling and analysis - Determination of dioxins and dioxin-like PCBs and of indicator PCBs by GC/HRMS BAS/TC 43 prBAS EN 17374:2021 EN 17374:2020, IDT Animal feeding stuffs: Methods of pr en 65.120 10.99 sampling and analysis - Determination of inorganic arsenic in animal feed by anion-exchange HPLC-ICP-MS
201 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 43 prBAS EN 17362:2021 EN 17362:2020, IDT Animal feeding stuffs: Methods of pr en 65.120 10.99 sampling and analysis - Determination of pentachlorophenol (PCP) in feed materials and compound feed by LC- MS/MS BAS/TC 43 prBAS EN ISO 16624:2021 EN ISO 16624:2020, IDT; ISO Wheat flour and durum wheat semolina pr en 67.060 10.99 16624:2020, IDT - Determination of colour by diffuse reflectance colorimetry BAS/TC 43 prBAS EN ISO 6647-1:2021 EN ISO 6647-1:2020, IDT; ISO Rice - Determination of amylose content pr en 67.060 10.99 6647-1:2020, IDT - Part 1: Spectrophotometric method with a defatting procedure by methanol and with calibration solutions of potato amylose and waxy rice amylopectin
BAS/TC 43 prBAS EN ISO 6647-2:2021 EN ISO 6647-2:2020, IDT; ISO Rice - Determination of amylose content pr en 67.060 10.99 6647-2:2020, IDT - Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards
BAS/TC 43 prBAS EN ISO 7540:2021 EN ISO 7540:2020, IDT; ISO Spices and condiments - Ground sweet pr en 67.220.10, 10.99 7540:2020, IDT and hot paprika (Capsicum annuum L. 67.200.10 and Capsicum frutescens L.) - Specifications BAS/TC 43 prBAS EN ISO 7541:2021 EN ISO 7541:2020, IDT; ISO Spices and condiments - pr en 67.220.10 10.99 7541:2020, IDT Spectrophotometric determination of the extractable colour in paprika BAS/TC 43 prBAS ISO 20984:2021 ISO 20984:2020, IDT Cornelian cherry - Specification and test ko en 67.080.10 10.99 methods BAS/TC 43 prBAS ISO 20982:2021 ISO 20982:2020, IDT Priests (caper) (Capparis spp.) - ko en 67.080.01 10.99 Specification and test methods BAS/TC 43 prBAS ISO 11050:2021 ISO 11050:2020, IDT Wheat flour and durum wheat semolina - ko en 67.060 10.99 Determination of impurities of animal origin BAS/TC 43 prBAS ISO 11133/A2:2021 ISO 11133:2014/Amd 2:2020, Microbiology of food, animal feed and ko en 07.100.30, 10.99 IDT water — Preparation, production, 07.100.20 storage and performance testing of culture media - AMENDMENT 2
202 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 43 prBAS ISO 6887-5:2021 ISO 6887-5:2020, IDT Microbiology of the food chain - ko en 07.100.30 10.99 Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 5: Specific rules for the preparation of milk and milk products BAS/TC 43 prBAS ISO/TS 26030:2021 ISO/TS 26030:2019, IDT Social responsibility and sustainable ko en 03.100.02, 10.99 development - Guidance on using ISO 67.020, 26000:2010 in the food chain 13.020.20 BAS/TC 43 prBAS ISO 19036:2021 ISO 19036:2019, IDT Microbiology of the food chain - ko en 07.100.30 10.99 Estimation of measurement uncertainty for quantitative determinations
BAS/TC 43 prBAS ISO 21983:2021 ISO 21983:2019, IDT Guidelines for the harvesting, ko en 67.220.10 10.99 transportation, separation of stigma, drying and storage of saffron before packing BAS/TC 43 prBAS ISO 22186:2021 ISO 22186:2020, IDT Milk and milk products - Determination ko en 67.100.01 10.99 of nitrofurazone BAS/TC 43 prBAS ISO/TS 22002-5:2021 ISO/TS 22002-5:2019, IDT Prerequisite programmes on food safety ko en 67.020 10.99 - Part 5: Transport and storage BAS/TC 43 prBAS ISO 3103:2021 ISO 3103:2019, IDT Tea - Preparation of liquor for use in ko en 67.140.10, 10.99 sensory tests 67.240 BAS/TC 43 prBAS ISO 22579:2021 ISO 22579:2020, IDT Infant formula and adult nutritionals - ko en 67.050 10.99 Determination of fructans - High performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD) after enzymatic treatment BAS/TC 43 prBAS ISO 11136/A1:2021 ISO 11136:2014/Amd 1:2020, Sensory analysis — Methodology — ko en 67.240 10.99 IDT General guidance for conducting hedonic tests with consumers in a controlled area - AMENDMENT 1 BAS/TC 43 prBAS ISO 23291:2021 ISO 23291:2020, IDT Milk and milk products - Guidelines for ko en 67.100.10 10.99 the application of in-line and on-line infrared spectrometry
203 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 43 prBAS ISO 23293:2021 ISO 23293:2020, IDT Milk-based infant formula powders - ko en 67.100.01 10.99 Quantification of whey protein content by sodium dodecyl sulfate-capillary gel electrophoresis (SDS-CGE) BAS/TC 43 prBAS ISO 23305:2021 ISO 23305:2020, IDT Fortified milk powders, infant formula ko en 67.100.10 10.99 and adult nutritionals - Determination of total biotin by liquid chromatography coupled with immunoaffinity column clean-up extraction BAS/TC 43 prBAS ISO 23349:2021 ISO 23349:2020, IDT Animal and vegetable fats and oils - ko en 67.200.10 10.99 Determination of sterols and stanols in foods and dietary supplements containing added phytosterols BAS/TC 43 prBAS ISO/TS 20224-1:2021 ISO/TS 20224-1:2020, IDT Molecular biomarker analysis - ko en 67.050 10.99 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR - Part 1: Bovine DNA detection method BAS/TC 43 prBAS ISO/TS 20224-2:2021 ISO/TS 20224-2:2020, IDT Molecular biomarker analysis - ko en 67.050 10.99 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR - Part 2: Ovine DNA detection method BAS/TC 43 prBAS ISO/TS 20224-3:2021 ISO/TS 20224-3:2020, IDT Molecular biomarker analysis - ko en 67.050 10.99 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR - Part 3: Porcine DNA detection method BAS/TC 43 prBAS ISO/TS 20224-4:2021 ISO/TS 20224-4:2020, IDT Molecular biomarker analysis - ko en 67.050 10.99 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR - Part 4: Chicken DNA detection method BAS/TC 43 prBAS ISO/TS 20224-5:2021 ISO/TS 20224-5:2020, IDT Molecular biomarker analysis - ko en 67.050 10.99 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR - Part 5: Goat DNA detection method
204 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 43 prBAS ISO/TS 20224-6:2021 ISO/TS 20224-6:2020, IDT Molecular biomarker analysis - ko en 67.050 10.99 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR - Part 6: Horse DNA detection method BAS/TC 43 prBAS ISO/TS 20224-7:2021 ISO/TS 20224-7:2020, IDT Molecular biomarker analysis - ko en 67.050 10.99 Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR - Part 7: Donkey DNA detection method BAS/TC 43 prBAS ISO 660:2021 ISO 660:2020, IDT Animal and vegetable fats and oils - ko en 67.200.10 10.99 Determination of acid value and acidity BAS/TC 43 prBAS ISO 23443:2021 ISO 23443:2020, IDT Infant formula and adult nutritionals - ko en 67.050 10.99 Determination of β-carotene, lycopene and lutein by reversed-phase ultra-high performance liquid chromatography (RP- UHPLC) BAS/TC 43 prBAS ISO 11746:2021 ISO 11746:2020, IDT Rice - Determination of biometric ko en 67.060 10.99 characteristics of kernels BAS/TC 43 prBAS ISO/TS 21569-3:2021 ISO/TS 21569-3:2020, IDT Horizontal methods for molecular ko en 67.050 10.99 biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 3: Construct-specific real- time PCR method for detection of P35S- pat-sequence for screening for genetically modified organisms
BAS/TC 43 prBAS ISO 7932/A1:2021 ISO 7932:2004/Amd 1:2020, IDT Inclusion of optional tests ko en 07.100.30 10.99
BAS/TC 43 prBAS ISO 11036:2021 ISO 11036:2020, IDT Sensory analysis - Methodology - ko en 67.240 10.99 Texture profile BAS/TC 43 prBAS ISO 6579-1/A1:2021 ISO 6579-1:2017/Amd 1:2020, Broader range of incubation ko en 07.100.30 10.99 IDT temperatures, amendment to the status of Annex D, and correction of the composition of MSRV and SC
205 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 43 prBAS ISO/TS 23942:2021 ISO/TS 23942:2020, IDT Determination of hydroxytyrosol and ko en 67.200.10 10.99 tyrosol content in extra virgin olive oils - Reverse phase high performance liquid chromatography (RP-HPLC) BAS/TC 43 prBAS ISO 6887-3/A1:2021 ISO 6887-3:2017/Amd 1:2020, Sample preparation for raw marine ko en 07.100.30 10.99 IDT gastropods BAS/TC 43 prBAS ISO 21543:2021 ISO 21543:2020, IDT Milk and milk products - Guidelines for ko en 67.100.01 10.99 the application of near infrared spectrometry BAS/TC 43 prBAS ISO 21468:2021 ISO 21468:2020, IDT Infant formula and adult nutritionals - ko en 67.050 10.99 Determination of free and total choline and free and total carnitine - Liquid chromatography tandem mass spectrometry (HPLC-MS/MS) BAS/TC 44 prBAS ISO 21246:2021 ISO 21246:2019, IDT Information and documentation - Key ko en 01.140.20 10.99 indicators for museums BAS/TC 44 prBAS ISO 15836-2:2021 ISO 15836-2:2019, IDT Information and documentation - The ko en 35.240.30 10.99 Dublin Core metadata element set - Part 2: DCMI Properties and classes BAS/TC 44 prBAS ISO/TR 22038:2021 ISO/TR 22038:2020, IDT Information and documentation - ko en 03.140, 10.99 Description and presentation of rights 01.140.20 information BAS/TC 44 prBAS ISO 3166-1:2021 ISO 3166-1:2020, IDT Codes for the representation of names ko en 01.140.30 10.99 of countries and their subdivisions - Part 1: Country code BAS/TC 44 prBAS ISO 3166-2:2021 ISO 3166-2:2020, IDT Codes for the representation of names ko en 01.140.30 10.99 of countries and their subdivisions - Part 2: Country subdivision code BAS/TC 44 prBAS ISO 3166-3:2021 ISO 3166-3:2020, IDT Codes for the representation of names ko en 01.140.30 10.99 of countries and their subdivisions - Part 3: Code for formerly used names of countries BAS/TC 44 prBAS ISO/TR 22428-1:2021 ISO/TR 22428-1:2020, IDT Managing records in cloud computing ko en 01.140.20 10.99 environments - Part 1: Issues and concerns BAS/TC 44 prBAS ISO 3297:2021 ISO 3297:2020, IDT Information and documentation - ko en 01.140.20 10.99 International standard serial number (ISSN)
206 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 44 prBAS ISO 30300:2021 ISO 30300:2020, IDT Information and documentation - ko en 01.140.20, 10.99 Records management - Core concepts 01.040.01 and vocabulary BAS/TC 44 prBAS ISO/TS 16175-2:2021 ISO/TS 16175-2:2020, IDT Information and documentation - ko en 01.140.20 10.99 Processes and functional requirements for software for managing records - Part 2: Guidance for selecting, designing, implementing and maintaining software for managing records
BAS/TC 44 prBAS ISO 16175-1:2021 ISO 16175-1:2020, IDT Information and documentation - ko en 01.140.20 10.99 Processes and functional requirements for software for managing records - Part 1: Functional requirements and associated guidance for any applications that manage digital records
BAS/TC 44 prBAS ISO 23404:2021 ISO 23404:2020, IDT Information and documentation - Papers ko en 85.060, 10.99 and boards used for conservation - 01.140.20 Measurement of impact of volatiles on cellulose in paper BAS/TC 44 prBAS ISO/TR 22299:2021 ISO/TR 22299:2018, IDT Document management - Digital file ko en 37.100.99, 10.99 format recommendations for long-term 35.240.30 storage BAS/TC 44 prBAS ISO 23504-1:2021 ISO 23504-1:2020, IDT Document management applications - ko en 35.240.30 10.99 Raster image transport and storage - Part 1: Use of ISO 32000 (PDF/R-1) BAS/TC 44 prBAS ISO 19626-1:2021 ISO 19626-1:2020, IDT Processes, data elements and ko en 35.240.63 10.99 documents in commerce, industry and administration - Trusted communication platforms for electronic documents - Part 1: Fundamentals BAS/TC 44 prBAS ISO 22468:2021 ISO 22468:2020, IDT Value stream management (VSM) ko en 03.100.01 10.99 BAS/TC 44 prBAS ISO 23354:2021 ISO 23354:2020, IDT Business requirements for end-to-end ko en 35.240.63 10.99 visibility of logistics flow BAS/TC 45 prBAS EN 13525:2021 EN 13525:2020, IDT Forestry machinery - Wood chippers - pr en 65.060.80 10.99 Safety
207 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 45 prBAS EN ISO 4254-11/A1:2021 EN ISO 4254-11:2010/A1:2020, Agricultural machinery - Safety - Part 11: pr en 65.060.50 10.99 IDT; ISO 4254-11:2010/Amd Pick-up balers - Amendment 1 1:2020, IDT BAS/TC 45 prBAS EN ISO 4254-6:2021 EN ISO 4254-6:2020, IDT; ISO Agricultural machinery - Safety - Part 6: pr en 65.060.40 10.99 4254-6:2020, IDT Sprayers and liquid fertilizer distributors
BAS/TC 45 prBAS EN 17344:2021 EN 17344:2020, IDT Agricultural machinery - Self-propelled pr en 65.060.01 10.99 agricultural and forestry vehicles - Requirements for braking BAS/TC 45 prBAS EN 17351:2021 EN 17351:2020, IDT Bio-based products - Determination of pr en 13.020.55 10.99 the oxygen content using an elemental analyser BAS/TC 45 prBAS EN 16087-1:2021 EN 16087-1:2020, IDT Soil improvers and growing media - pr en 65.080 10.99 Determination of the aerobic biological activity - Part 1: Oxygen uptake rate (OUR) BAS/TC 45 prBAS ISO 14223-3:2021 ISO 14223-3:2018, IDT Radiofrequency identification of animals - ko en 65.020.30, 10.99 Advanced transponders - Part 3: 35.240.99 Applications BAS/TC 45 prBAS ISO 4254-16:2021 ISO 4254-16:2018, IDT Agricultural machinery - Safety - Part 16: ko en 65.060.40 10.99 Portable agricultural grain augers BAS/TC 45 prBAS ISO 25358:2021 ISO 25358:2018, IDT Crop protection equipment - Droplet- ko en 65.060.40 10.99 size spectra from atomizers - Measurement and classification BAS/TC 45 prBAS ISO 789-13:2021 ISO 789-13:2018, IDT Agricultural tractors - Test procedures - ko en 65.060.10 10.99 Part 13: Vocabulary and specimen test report BAS/TC 45 prBAS ISO 20112-1:2021 ISO 20112-1:2018, IDT Tractors and machinery for agriculture ko en 65.060.10, 35.240.9910.99 and forestry - Camera interface between tractor and implement - Part 1: Analogue camera interface BAS/TC 45 prBAS ISO 28139:2021 ISO 28139:2019, IDT Equipment for crop protection - ko en 65.060.40 10.99 Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods
208 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 45 prBAS ISO 16122-5:2021 ISO 16122-5:2020, IDT Agricultural and forestry machines - ko en 65.060.40, 10.99 Inspection of sprayers in use - Part 5: 13.020.99 Aerial spray systems BAS/TC 45 prBAS ISO 9912-4:2021 ISO 9912-4:2018, IDT Agricultural irrigation equipment - Filters ko en 65.060.35 10.99 for microirrigation - Part 4: Granulated media filters BAS/TC 45 prBAS ISO 15003:2021 ISO 15003:2019, IDT Agricultural engineering - Electrical and ko en 65.060.99 10.99 electronic equipment - Testing resistance to environmental conditions BAS/TC 45 prBAS ISO 15886-4:2021 ISO 15886-4:2019, IDT Irrigation equipment - Irrigation ko en 65.060.35 10.99 sprinklers - Part 4: Test methods for durability BAS/TC 45 prBAS ISO 5681:2021 ISO 5681:2020, IDT Equipment for crop protection - ko en 65.060.40, 01.040.6510.99 Vocabulary BAS/TC 45 prBAS ISO 21876:2021 ISO 21876:2020, IDT Machinery for forestry - Saw chain shot ko en 65.060.80 10.99 protective windows - Test method and performance criteria BAS/TC 45 prBAS ISO 12809:2021 ISO 12809:2020, IDT Crop protection equipment - ko en 65.060.40 10.99 Reciprocating positive displacement pumps and centrifugal pumps - Test method BAS/TC 45 prBAS ISO 22172-1:2021 ISO 22172-1:2020, IDT Agricultural vehicles - Standardized ko en 65.060.01 10.99 access to repair and maintenance information (RMI) - Part 1: User interface requirements for web-based information systems BAS/TC 45 prBAS ISO 15077:2021 ISO 15077:2020, IDT Tractors and self-propelled machinery ko en 65.060.01 10.99 for agriculture - Operator controls - Actuating forces, displacement, location and method of operation BAS/TC 45 prBAS ISO 11783-7/A1:2021 ISO 11783-7:2015/Amd 1:2018, Tractors and machinery for agriculture ko en 65.060.01, 10.99 IDT and forestry — Serial control and 35.240.99 communications data network — Part 7:Implement messages application layer - AMENDMENT 1 BAS/TC 45 prBAS ISO 22471:2021 ISO 22471:2020, IDT Permissible mechanical connection ko en 65.060.10 10.99 combinations between towed and towing agricultural vehicles
209 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 45 prBAS ISO 23130:2021 ISO 23130:2020, IDT Milking and cooling machine ko en 65.040.10 10.99 installations - Monitoring device for bulk milk cooling tanks - Requirements
BAS/TC 45 prBAS ISO 13772/A1:2021 ISO 13772:2018/Amd 1:2020, Forestry machinery — Portable chain- ko en 65.060.80 10.99 IDT saws — Nonmanually actuated chain brake performance AMENDMENT 1 BAS/TC 45 prBAS ISO 6533:2021 ISO 6533:2020, IDT Forestry machinery - Portable chain-saw ko en 65.060.80 10.99 front hand-guard - Dimensions and clearances BAS/TC 45 prBAS ISO 12140-1:2021 ISO 12140-1:2020, IDT Agricultural trailers and trailed ko en 65.060.01 10.99 equipment - Drawbar jacks - Part 1: Design safety, test methods and acceptance criteria BAS/TC 45 prBAS ISO 12140-2:2021 ISO 12140-2:2020, IDT Agricultural trailers and trailed ko en 65.060.01 10.99 equipment - Drawbar jacks - Part 2: Application safety, test methods and acceptance criteria BAS/TC 45 prBAS ISO 25119-2:2021 ISO 25119-2:2019, IDT Tractors and machinery for agriculture ko en 65.060.01, 10.99 and forestry - Safety-related parts of 35.240.99 control systems - Part 2: Concept phase
BAS/TC 45 prBAS ISO 10726:2021 ISO 10726:2020, IDT Portable chain-saws - Chain catcher - ko en 65.060.80 10.99 Dimensions and mechanical strength BAS/TC 45 prBAS ISO 25119-1/A1:2021 ISO 25119-1:2018/Amd 1:2020, Tractors and machinery for agriculture ko en 65.060.01, 10.99 IDT and forestry — Safety-related parts of 35.240.99 control systems — Part 1:General principles for design and development - AMENDMENT 1: 1 BAS/TC 45 prBAS ISO 25119-3/A1:2021 ISO 25119-3:2018/Amd 1:2020, Tractors and machinery for agriculture ko en 65.060.01, 10.99 IDT and forestry — Safety-related parts of 35.240.99 control systems — Part 3: Series development, hardware and software - AMENDMENT 1: 1
210 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 45 prBAS ISO 25119-4/A1:2021 ISO 25119-4:2018/Amd 1:2020, Tractors and machinery for agriculture ko en 65.060.01, 10.99 IDT and forestry — Safety-related parts of 35.240.99 control systems — Part 4:Production, operation, modification and supporting processes - AMENDMENT 1: 1 BAS/TC 45 prBAS ISO 1750/A6:2021 ISO 1750:1981/Amd 6:2018, IDT Pesticides and other agrochemicals — ko en 65.100.01 10.99 Common names - AMENDMENT 6: Meptyldinocap BAS/TC 45 prBAS ISO 19822:2021 ISO 19822:2018, IDT Fertilizers and soil conditioners - ko en 65.080 10.99 Determination of humic and hydrophobic fulvic acids concentrations in fertilizer materials BAS/TC 45 prBAS ISO 15958:2021 ISO 15958:2019, IDT Fertilizers - Extraction of water soluble ko en 65.080 10.99 phosphorus BAS/TC 45 prBAS ISO 20977:2021 ISO 20977:2018, IDT Liming materials - Determination of size ko en 65.080 10.99 distribution by dry and wet sieving BAS/TC 45 prBAS ISO 20978:2021 ISO 20978:2020, IDT Liming material - Determination of ko en 65.080 10.99 neutralizing value - Titrimetric methods BAS/TC 45 prBAS ISO 22146:2021 ISO 22146:2018, IDT Carbonate liming materials - ko en 65.080 10.99 Determination of reactivity - Automatic titration method with citric acid BAS/TC 45 prBAS ISO 23381:2021 ISO 23381:2020, IDT Determination of salt out (crystallization) ko en 65.080 10.99 temperature of liquid fertilizers
BAS/TC 45 prBAS ISO 15152/A2:2021 ISO 15152:2003/Amd 2:2018, Tobacco — Determination of the content ko en 65.160 10.99 IDT of total alkaloids as nicotine — Continuous-flow analysis method — AMENDMENT 2 BAS/TC 45 prBAS ISO 20778:2021 ISO 20778:2018, IDT Cigarettes - Routine analytical cigarette ko en 65.160 10.99 smoking machine - Definitions and standard conditions with an intense smoking regime BAS/TC 45 prBAS ISO 20779:2021 ISO 20779:2018, IDT Cigarettes - Generation and collection of ko en 65.160 10.99 total particulate matter using a routine analytical smoking machine with an intense smoking regime
211 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 45 prBAS ISO 21045:2021 ISO 21045:2018, IDT Tobacco and tobacco products - ko en 65.160 10.99 Determination of ammonia - Method using ion chromatographic analysis BAS/TC 45 prBAS ISO 21160:2021 ISO 21160:2018, IDT Cigarettes - Determination of selected ko en 65.160 10.99 carbonyls in the mainstream smoke of cigarettes - Method using high performance liquid chromatography BAS/TC 45 prBAS ISO 21330:2021 ISO 21330:2018, IDT Cigarettes - Determination of selected ko en 65.160 10.99 volatile organic compounds in the mainstream smoke of cigarettes - Method using GC/MS BAS/TC 45 prBAS ISO 22486:2021 ISO 22486:2019, IDT Water pipe tobacco smoking machine - ko en 65.160 10.99 Definitions and standard conditions BAS/TC 45 prBAS ISO/TS 22487:2021 ISO/TS 22487:2019, IDT Water pipe tobacco - Determination of ko en 65.160 10.99 total collected matter and nicotine using a water pipe tobacco smoking machine
BAS/TC 45 prBAS ISO/TS 22491:2021 ISO/TS 22491:2019, IDT Water pipe tobacco - Determination of ko en 65.160 10.99 carbon monoxide in the vapour phase of water pipe tobacco smoke - NDIR method BAS/TC 45 prBAS ISO/TS 22492:2021 ISO/TS 22492:2019, IDT Water pipe tobacco products - ko en 65.160 10.99 Determination of carbon monoxide emission of glowing water pipe charcoal - NDIR method BAS/TC 45 prBAS ISO 22980:2021 ISO 22980:2020, IDT Tobacco - Determination of the content ko en 65.160 10.99 of total alkaloids as nicotine - Continuous-flow analysis method using KSCN/DCIC BAS/TC 45 prBAS ISO 22634-1:2021 ISO 22634-1:2019, IDT Cigarettes - Determination of ko en 65.160 10.99 benzo[a]pyrene in cigarette mainstream smoke using GC/MS - Part 1: Method using methanol as extraction solvent
212 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 45 prBAS ISO 22634-2:2021 ISO 22634-2:2019, IDT Cigarettes - Determination of ko en 65.160 10.99 benzo[a]pyrene in cigarette mainstream smoke using GC/MS - Part 2: Method using cyclohexane as extraction solvent
BAS/TC 45 prBAS ISO 8454/A2:2021 ISO 8454:2007/Amd 2:2019, IDT Cigarettes — Determination of carbon ko en 65.160 10.99 monoxide in the vapour phase of cigarette smoke — NDIR method - AMENDMENT 2 BAS/TC 45 prBAS ISO 20779/A1:2021 ISO 20779:2018/Amd 1:2019, Cigarettes — Generation and collection ko en 65.160 10.99 IDT of total particulate matter using a routine analytical smoking machine with an intense smoking regime - AMENDMENT 1 BAS/TC 45 prBAS ISO 23904:2021 ISO 23904:2020, IDT Cigarettes - Determination of selected ko en 65.160 10.99 phenolic compounds in cigarette mainstream smoke with an intense smoking regime using HPLC-FLD BAS/TC 45 prBAS ISO 23905:2021 ISO 23905:2020, IDT Cigarettes - Determination of selected ko en 65.160 10.99 phenolic compounds in cigarette mainstream smoke using HPLC-FLD BAS/TC 45 prBAS ISO 23906-1:2021 ISO 23906-1:2020, IDT Cigarettes - Determination of ko en 65.160 10.99 benzo[a]pyrene in cigarette mainstream smoke with an intense smoking regime using GC/MS - Part 1: Method using methanol as extraction solvent
BAS/TC 45 prBAS ISO 23919:2021 ISO 23919:2020, IDT Cigarettes - Determination of ammonia ko en 65.160 10.99 in cigarette mainstream smoke using ion chromatography BAS/TC 45 prBAS ISO 23920:2021 ISO 23920:2020, IDT Cigarettes - Determination of ammonia ko en 65.160 10.99 in cigarette mainstream smoke with an intense smoking regime using ion chromatography
213 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 45 prBAS ISO 23921:2021 ISO 23921:2020, IDT Cigarettes - Determination of tobacco ko en 65.160 10.99 specific nitrosamines in mainstream cigarette smoke with an intense smoking regime - Method using LC- MS/MS BAS/TC 45 prBAS ISO 23922:2021 ISO 23922:2020, IDT Cigarettes - Determination of selected ko en 65.160 10.99 carbonyls in the mainstream smoke of cigarettes with an intense smoking regime - Method using high performance liquid chromatography BAS/TC 45 prBAS ISO 23923:2021 ISO 23923:2020, IDT Cigarettes - Determination of selected ko en 65.160 10.99 volatile organic compounds in the mainstream smoke of cigarettes with an intense smoking regime - Method using GC/MS BAS/TC 45 prBAS ISO 13276:2021 ISO 13276:2020, IDT Tobacco and tobacco products - ko en 65.160 10.99 Determination of nicotine purity - Gravimetric method using tungstosilicic acid BAS/TC 45 prBAS ISO 4874:2021 ISO 4874:2020, IDT Tobacco - Sampling of batches of raw ko en 65.160 10.99 material - General principles BAS/TC 46 prBAS CEN/TR 17420:2021 CEN/TR 17420:2020, IDT Railway applications - Vehicle end pr en 45.140, 10.99 design for trams and light rail vehicles 45.060.10 with respect to pedestrian safety BAS/TC 46 prBAS CEN/TR 17469:2021 CEN/TR 17469:2020, IDT Railway applications - Axle design pr en 45.040 10.99 method BAS/TC 46 prBAS CEN/TR 17498:2021 CEN/TR 17498:2020, IDT Railway applications - Infrastructure - pr en 93.100, 10.99 Rail mounted railway maintenance and 45.120 inspection machines and associated equipment - Explanation of machine type and compliance, including acceptance processes BAS/TC 46 prBAS CEN/TR 17532:2021 CEN/TR 17532:2020, IDT Railway applications - Fire protection on pr en 45.060.01, 10.99 railway vehicles - Assessment of fire 13.220.20 containment and control systems for railway vehicles
214 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 46 prBAS CEN/TS 13103-2:2021 CEN/TS 13103-2:2020, IDT Railway applications - Wheelsets and pr en 45.040 10.99 bogies - Part 2: Design method for axles with internal journals BAS/TC 46 prBAS CLC/TS 50238-2:2021 CLC/TS 50238-2:2020, IDT Railway applications - Compatibility pr en 29.280, 10.99 between rolling stock and train detection 45.060.10 systems - Part 2: Compatibility with track circuits BAS/TC 46 prBAS CLC/TS 50238-3:2021 CLC/TS 50238-3:2019, IDT Railway applications - Compatibility pv hr,en 29.280, 10.99 between rolling stock and train detection 45.060.10 systems - Part 3: Compatibility with axle counters BAS/TC 46 prBAS EN 13146-4:2021 EN 13146-4:2020, IDT Railway applications - Track - Test pr en 93.100 10.99 methods for fastening systems - Part 4: Effect of repeated loading BAS/TC 46 prBAS EN 13146-9:2021 EN 13146-9:2020, IDT Railway applications - Track - Test pr en 93.100 10.99 methods for fastening systems - Part 9: Determination of stiffness BAS/TC 46 prBAS EN 13230-4+A1:2021 EN 13230-4:2016+A1:2020, IDT Railway applications - Track - Concrete pr en 93.100, 10.99 sleepers and bearers - Part 4: 91.100.30 Prestressed bearers for switches and crossings BAS/TC 46 prBAS EN 13230-6:2021 EN 13230-6:2020, IDT Railway applications - Track - Concrete pr en 93.100, 10.99 sleepers and bearers - Part 6: Design 91.100.30
BAS/TC 46 prBAS EN 13260:2021 EN 13260:2020, IDT Railway applications - Wheelsets and pr en 45.040 10.99 bogies - Wheelsets - Product requirements BAS/TC 46 prBAS EN 13261:2021 EN 13261:2020, IDT Railway applications - Wheelsets and pr en 45.040 10.99 bogies - Axles - Product requirements BAS/TC 46 prBAS EN 13262:2021 EN 13262:2020, IDT Railway applications - Wheelsets and pr en 45.040 10.99 bogies - Wheels - Product requirements
BAS/TC 46 prBAS EN 13715:2021 EN 13715:2020, IDT Railway applications - Wheelsets and pr en 45.040 10.99 bogies - Wheels - Tread profile BAS/TC 46 prBAS EN 13979-1:2021 EN 13979-1:2020, IDT Railway applications - Wheelsets and pr en 45.060.01, 10.99 bogies - Monobloc Wheels - Technical 45.040 approval procedure - Part 1: Forged and rolled wheels
215 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 46 prBAS EN 14752:2021 EN 14752:2019, IDT Railway applications - Bodyside pr en 45.140 10.99 entrance systems for rolling stock BAS/TC 46 prBAS EN 15153-1:2021 EN 15153-1:2020, IDT Railway applications - External visible pr en 45.060.10 10.99 and audible warning devices - Part 1: Head, marker and tail lamps for heavy rail BAS/TC 46 prBAS EN 15153-2:2021 EN 15153-2:2020, IDT Railway applications - External visible pr en 45.060.10 10.99 and audible warning devices - Part 2: Warning horns for heavy rail BAS/TC 46 prBAS EN 15153-3:2021 EN 15153-3:2020, IDT Railway applications - External visible pr en 45.140, 10.99 and audible warning devices - Part 3: 45.060.10 Visible warning devices for urban rail BAS/TC 46 prBAS EN 15153-4:2021 EN 15153-4:2020, IDT Railway applications - External visible pr en 45.140, 10.99 and audible warning devices - Part 4: 45.060.10 Audible warning devices for urban rail BAS/TC 46 prBAS EN 15227:2021 EN 15227:2020, IDT Railway applications - Crashworthiness pr en 45.060.01 10.99 requirements for rail vehicles
BAS/TC 46 prBAS EN 15328:2021 EN 15328:2020, IDT Railway applications - Braking - Brake pr en 45.040 10.99 pads BAS/TC 46 prBAS EN 15611:2021 EN 15611:2020, IDT Railway applications - Braking - Relay pr en 45.060.01, 10.99 valves 45.040 BAS/TC 46 prBAS EN 15612:2021 EN 15612:2020, IDT Railway applications - Braking - Brake pr en 45.060.01, 10.99 pipe accelerator 45.040 BAS/TC 46 prBAS EN 16185-1+A1:2021 EN 16185-1:2014+A1:2020, IDT Railway applications - Braking systems pr en 45.040 10.99 of multiple unit trains - Part 1: Requirements and definitions BAS/TC 46 prBAS EN 16185-2+A1:2021 EN 16185-2:2014+A1:2019, IDT Railway applications - Braking systems pr en 45.040 10.99 of multiple unit trains - Part 2: Test methods BAS/TC 46 prBAS EN 16207+A1:2021 EN 16207:2014+A1:2019, IDT Railway applications - Braking - pr en 45.060.01 10.99 Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock BAS/TC 46 prBAS EN 16334-2:2021 EN 16334-2:2020, IDT Railway applications - Passenger alarm pr en 45.060.20, 10.99 system - Part 2: System requirements 13.320 for urban rail
216 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 46 prBAS EN 16729-2:2021 EN 16729-2:2020, IDT Railway applications - Infrastructure - pr en 93.100 10.99 Non-destructive testing on rails in track - Part 2: Eddy current testing of rails in track BAS/TC 46 prBAS EN 17084/Cor 1:2021 EN 17084:2018/AC:2020, IDT Railway applications - Fire protection on pr en 13.220.40, 10.99 railway vehicles - Toxicity test of 45.060.01 materials and components BAS/TC 46 prBAS EN 17285:2021 EN 17285:2020, IDT Railway applications - Acoustics - pr en 45.060.20, 10.99 Measuring of door audible warnings 17.140.30 BAS/TC 46 prBAS EN 17319:2021 EN 17319:2020, IDT Railway applications - Infrastructure - pr en 45.140, 10.99 Performance requirements of rail 93.100 fastening systems for tramways BAS/TC 46 prBAS EN 17355:2021 EN 17355:2020, IDT Railway applications - Communication pr en 45.060.01, 10.99 device for urban rail - System 13.320 requirements BAS/TC 46 prBAS EN 45545-2:2021 EN 45545-2:2020, IDT Railway applications - Fire protection on pr en 45.060.01, 10.99 railway vehicles - Part 2: Requirements 13.220.20 for fire behavior of materials and components BAS/TC 46 prBAS EN 50119:2021 EN 50119:2020, IDT Railway applications - Fixed installations pr en 29.280 10.99 - Electric traction overhead contact lines
BAS/TC 46 prBAS EN 50128/A1:2021 EN 50128:2011/A1:2020, IDT Railway applications - Communication, pr en 93.100, 10.99 signalling and processing systems - 45.020, Software for railway control and 35.240.60 protection systems BAS/TC 46 prBAS EN 50128/A2:2021 EN 50128:2011/A2:2020, IDT Railway applications - Communication, pr en 93.100, 10.99 signalling and processing systems - 45.020, Software for railway control and 35.240.60 protection systems BAS/TC 46 prBAS EN 50153/A2:2021 EN 50153:2014/A2:2020, IDT Railway applications - Rolling stock - pr en 45.060.01 10.99 Protective provisions relating to electrical hazards BAS/TC 46 prBAS EN 50159/A1:2021 EN 50159:2010/A1:2020, IDT Railway applications - Communication, pr en 45.020, 10.99 signalling and processing systems - 35.240.60 Safety-related communication in transmission systems
217 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 46 prBAS EN 50163/A2:2021 EN 50163:2004/A2:2020, IDT Railway applications - Supply voltages pr en 29.280 10.99 of traction systems BAS/TC 46 prBAS EN 50238-1:2021 EN 50238-1:2019, IDT Railway applications - Compatibility pr en 29.180, 10.99 between rolling stock and train detection 45.060.10 systems - Part 1: General BAS/TC 46 prBAS EN 50367:2021 EN 50367:2020, IDT Railway applications - Fixed installations pr en 29.280 10.99 and rolling stock - Criteria to achieve technical compatibility between pantographs and overhead contact line
BAS/TC 46 prBAS EN 50546:2021 EN 50546:2020, IDT Railway applications - Rolling Stock - pr en 45.060.01, 10.99 Three-phase shore (external) supply 29.120.30 system for rail vehicles and its connectors BAS/TC 46 prBAS EN 50553/A2:2021 EN 50553:2012/A2:2020, IDT Railway applications - Requirements for pr en 45.060.01, 10.99 running capability in case of fire on 13.220.50 board of rolling stock BAS/TC 46 prBAS EN 50641:2021 EN 50641:2020, IDT Railway applications - Fixed installations pr en 29.280 10.99 - Requirements for the validation of simulation tools used for the design of electric traction power supply systems
BAS/TC 46 prBAS EN IEC 60077-3:2021 EN IEC 60077-3:2019, IDT; IEC Railway applications - Electric pr en,fr 29.280, 10.99 60077-3:2019, IDT equipment for rolling stock - Part 3: 45.060.01 Electrotechnical components - Rules for DC circuit-breakers BAS/TC 46 prBAS EN IEC 60077-4:2021 EN IEC 60077-4:2019, IDT; IEC Railway applications - Electric pr en,fr 45.060.01, 10.99 60077-4:2019, IDT equipment for rolling stock - Part 4: 45.060 Electrotechnical components - Rules for AC circuit-breakers BAS/TC 46 prBAS EN IEC 60077-5:2021 EN IEC 60077-5:2019, IDT; IEC Railway applications - Electric pr en,fr 45.060.01, 10.99 60077-5:2019, IDT equipment for rolling stock - Part 5: 45.060 Electrotechnical components - Rules for HV fuses BAS/TC 46 prBAS EN IEC 62290-3/Cor EN IEC 62290-3:2019/AC:2020- Railway applications - Urban guided pr en,fr 45.060.01 10.99 1:2021 07, IDT; IEC 62290- transport management and 3:2019/COR1:2020, IDT command/control systems - Part 3: System requirements specification
218 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 46 prBAS EN IEC 62290-3:2021 EN IEC 62290-3:2019, IDT; IEC Railway applications - Urban guided pr en,fr 45.060.01 10.99 62290-3:2019, IDT transport management and command/control systems - Part 3: System requirements specification BAS/TC 47 prBAS EN 15332:2021 EN 15332:2019, IDT Heating boilers - Energy assessment of pr en 91.140.65 10.99 hot water storage tanks BAS/TC 47 prBAS EN 14624:2021 EN 14624:2020, IDT Performance of portable locating leak pr en 71.100.45, 10.99 detectors and of fixed gas detectors for 23.040.99 all refrigerants BAS/TC 47 prBAS EN 14276-1:2021 EN 14276-1:2020, IDT Pressure equipment for refrigerating pr en 27.200, 10.99 systems and heat pumps - Part 1: 27.080, Vessels - General requirements 23.020.30 BAS/TC 47 prBAS EN 14276-2:2021 EN 14276-2:2020, IDT Pressure equipment for refrigerating pr en 27.200, 10.99 systems and heat pumps - Part 2: Piping 27.080, - General requirements 23.020.30 BAS/TC 47 prBAS EN 13053:2021 EN 13053:2019, IDT Ventilation for buildings - Air handling pr en 91.140.30 10.99 units - Rating and performance for units, components and sections BAS/TC 47 prBAS EN 13215+A1:2021 EN 13215:2016+A1:2020, IDT Condensing units for refrigeration - pr en 27.200 10.99 Rating conditions, tolerances and presentation of manufacturer's performance data BAS/TC 47 prBAS EN ISO 12759-4:2021 EN ISO 12759-4:2019, IDT; ISO Fans - Efficiency classification for fans - pr en 23.120 10.99 12759-4:2019, IDT Part 4: Driven fans at maximum operating speed BAS/TC 47 prBAS EN 16282-6:2021 EN 16282-6:2020, IDT Equipment for commercial kitchens - pr en 97.040.99 10.99 Components for ventilation in commercial kitchens - Part 6: Aerosol separators; Design and safety requirements BAS/TC 47 prBAS EN 17415-1:2021 EN 17415-1:2020, IDT District cooling pipes - Bonded single pr en 23.040.99 10.99 pipe systems for directly buried cold water networks - Part 1: Factory made pipe assembly of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
219 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 47 prBAS EN 17414-1:2021 EN 17414-1:2020, IDT District cooling pipes - Factory made pr en 23.040.99 10.99 flexible pipe systems - Part 1: Classification, general requirements and test methods BAS/TC 47 prBAS EN 17414-2:2021 EN 17414-2:2020, IDT District cooling pipes - Factory made pr en 23.040.99 10.99 flexible pipe systems - Part 2: Bonded system with plastic service pipes; requirements and test methods BAS/TC 47 prBAS EN 17414-3:2021 EN 17414-3:2020, IDT District cooling pipes - Factory made pr en 23.040.99 10.99 flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods BAS/TC 47 prBAS EN ISO 22041/A1:2021 EN ISO 22041:2019/A1:2019, Refrigerated storage cabinets and pr en 97.130.20 10.99 IDT counters for professional use - Performance and energy consumption BAS/TC 47 prBAS ISO 916:2021 ISO 916:2020, IDT Testing of refrigerating systems ko en 27.200 10.99 BAS/TC 47 prBAS ISO 5151:2021 ISO 5151:2017/Amd 1:2020, IDT; Non-ducted air conditioners and heat ko en 27.080, 10.99 ISO 5151:2017, IDT pumps - Testing and rating for 23.120 performance BAS/TC 47 prBAS ISO 13253:2021 ISO 13253:2017/Amd 1:2020, Ducted air-conditioners and air-to-air ko en 27.080, 10.99 IDT; ISO 13253:2017, IDT heat pumps - Testing and rating for 23.120 performance BAS/TC 47 prBAS ISO 15042:2021 ISO 15042:2017/Amd 1:2020, Multiple split-system air conditioners and ko en 27.080, 10.99 IDT; ISO 15042:2017, IDT air-to-air heat pumps - Testing and 23.120 rating for performance BAS/TC 47 prBAS ISO 12759-2:2021 ISO 12759-2:2019, IDT Fans - Efficiency classification for fans - ko en 23.120 10.99 Part 2: Standard losses for drive components BAS/TC 47 prBAS ISO 12759-3:2021 ISO 12759-3:2019, IDT Fans - Efficiency classification for fans - ko en 23.120 10.99 Part 3: Fans without drives at maximum operating speed BAS/TC 47 prBAS ISO 22975-5:2021 ISO 22975-5:2019, IDT Solar energy - Collector components ko en 27.160 10.99 and materials - Part 5: Insulation material durability and performance
220 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 47 prBAS ISO 16358-1/A1:2021 ISO 16358-1:2013/Amd 1:2019, Air-cooled air conditioners and air-to-air ko en 27.080, 10.99 IDT heat pumps — Testing and calculating 23.120 methods for seasonal performance factors —Part 1:Cooling seasonal performance factor - AMENDMENT 1
BAS/TC 47 prBAS ISO 817/A1:2021 ISO 817:2014/Amd 1:2017, IDT Refrigerants — Designation and safety ko en 71.100.45 10.99 classification - AMENDMENT 1 BAS/TC 47 prBAS ISO 5149-2/A1:2021 ISO 5149-2:2014/Amd 1:2020, Refrigerating systems and heat pumps ko en 27.200, 10.99 IDT — Safety and environmental 27.080 requirements —Part 2:Design, construction, testing, marking and documentation - AMENDMENT 1 BAS/TC 48 prBAS EN ISO 19577:2021 EN ISO 19577:2019, IDT; ISO Footwear - Critical substances pr en 61.060 10.99 19577:2019, IDT potentially present in footwear and footwear components - Determination of Nitrosamines BAS/TC 48 prBAS EN ISO 22744-1:2021 EN ISO 22744-1:2020, IDT; ISO Textiles and textile products - pr en 59.080.01 10.99 22744-1:2020, IDT Determination of organotin compounds - Part 1: Derivatisation method using gas chromatography BAS/TC 48 prBAS EN ISO 20705:2021 EN ISO 20705:2020, IDT; ISO Textiles - Quantitative microscopical pr en 59.060.01 10.99 20705:2019, IDT analysis - General principles of testing BAS/TC 48 prBAS EN ISO 13365-2:2021 EN ISO 13365-2:2020, IDT; ISO Leather - Chemical determination of the pr en 59.140.30 10.99 13365-2:2020, IDT preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography - Part 2: Artificial perspiration extraction method BAS/TC 48 prBAS EN ISO 3071:2021 EN ISO 3071:2020, IDT; ISO Textiles - Determination of pH of pr en 59.080.01 10.99 3071:2020, IDT aqueous extract BAS/TC 48 prBAS EN ISO 1833-1:2021 EN ISO 1833-1:2020, IDT; ISO Textiles - Quantitative chemical analysis pr en 59.060.01 10.99 1833-1:2020, IDT - Part 1: General principles of testing
BAS/TC 48 prBAS EN ISO 1833-2:2021 EN ISO 1833-2:2020, IDT; ISO Textiles - Quantitative chemical analysis pr en 59.060.01 10.99 1833-2:2020, IDT - Part 2: Ternary fibre mixtures
221 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 48 prBAS EN ISO 1833-13:2021 EN ISO 1833-13:2019, IDT; ISO Textiles - Quantitative chemical analysis pr en 59.060.20, 10.99 1833-13:2019, IDT - Part 13: Mixtures of certain chlorofibres 59.060.01 with certain other fibres (method using carbon disulfide/acetone)
BAS/TC 48 prBAS EN ISO 1833-15:2021 EN ISO 1833-15:2019, IDT; ISO Textiles - Quantitative chemical analysis pr en 59.060.01 10.99 1833-15:2019, IDT - Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content) BAS/TC 48 prBAS EN ISO 1833-17:2021 EN ISO 1833-17:2020, IDT; ISO Textiles - Quantitative chemical analysis pr en 59.060.01 10.99 1833-17:2019, IDT - Part 17: Mixtures of cellulose fibres and certain fibres with chlorofibres and certain other fibres (method using concentrated sulfuric acid) BAS/TC 48 prBAS EN ISO 13938-1:2021 EN ISO 13938-1:2019, IDT; ISO Textiles - Bursting properties of fabrics - pr en 59.080.30 10.99 13938-1:2019, IDT Part 1: Hydraulic method for determination of bursting strength and bursting distension BAS/TC 48 prBAS EN ISO 13938-2:2021 EN ISO 13938-2:2019, IDT; ISO Textiles - Bursting properties of fabrics - pr en 59.080.30 10.99 13938-2:2019, IDT Part 2: Pneumatic method for determination of bursting strength and bursting distension BAS/TC 48 prBAS EN ISO 3376:2021 EN ISO 3376:2020, IDT; ISO Leather - Physical and mechanical tests - pr en 59.140.30 10.99 3376:2020, IDT Determination of tensile strength and percentage elongation BAS/TC 48 prBAS EN ISO 14088:2021 EN ISO 14088:2020, IDT; ISO Leather - Chemical tests - Quantitative pr en 59.140.30 10.99 14088:2020, IDT analysis of tanning agents by filter method BAS/TC 48 prBAS EN ISO 17076-1:2021 EN ISO 17076-1:2020, IDT; ISO Leather - Determination of abrasion pr en 59.140.30 10.99 17076-1:2020, IDT resistance - Part 1: Taber® method BAS/TC 48 prBAS EN ISO 20706-1:2021 EN ISO 20706-1:2019, IDT; ISO Textiles - Qualitative and quantitative pr en 59.060.01 10.99 20706-1:2019, IDT analysis of some bast fibres (flax, hemp, ramie) and their blends - Part 1: Fibre identification using microscopy methods
BAS/TC 48 prBAS EN ISO 20136:2021 EN ISO 20136:2020, IDT; ISO Leather - Determination of degradability pr en 59.140.30 10.99 20136:2020, IDT by micro-organisms
222 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 48 prBAS EN ISO 105-A03:2021 EN ISO 105-A03:2019, IDT; ISO Textiles - Tests for colour fastness - Part pr en 59.080.01 10.99 105-A03:2019, IDT A03: Grey scale for assessing staining
BAS/TC 48 prBAS EN ISO 20418-3:2021 EN ISO 20418-3:2020, IDT; ISO Textiles - Qualitative and quantitative pr en 59.060.01 10.99 20418-3:2020, IDT proteomic analysis of some animal hair fibres - Part 3: Peptide detection using LC-MS without protein reduction BAS/TC 48 prBAS EN ISO 105-B06:2021 EN ISO 105-B06:2020, IDT; ISO Textiles - Tests for colour fastness - Part pr en 59.080.01 10.99 105-B06:2020, IDT B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test BAS/TC 48 prBAS EN ISO 20932-3:2021 EN ISO 20932-3:2020, IDT; ISO Textiles - Determination of the elasticity pr en 59.080.30 10.99 20932-3:2018, IDT of fabrics - Part 3: Narrow fabrics
BAS/TC 48 prBAS EN ISO 20932-2:2021 EN ISO 20932-2:2020, IDT; ISO Textiles - Determination of the elasticity pr en 59.080.30 10.99 20932-2:2018, IDT of fabrics - Part 2: Multiaxial tests
BAS/TC 48 prBAS EN ISO 20932-1:2021 EN ISO 20932-1:2020, IDT; ISO Textiles - Determination of the elasticity pr en 59.080.30 10.99 20932-1:2018, IDT of fabrics - Part 1: Strip tests BAS/TC 48 prBAS EN ISO 17131:2021 EN ISO 17131:2020, IDT; ISO Leather - Identification of leather with pr en 59.140.30 10.99 17131:2020, IDT microscopy BAS/TC 48 prBAS EN ISO 1833-25:2021 EN ISO 1833-25:2020, IDT; ISO Textiles - Quantitative chemical analysis pr en 59.060.01 10.99 1833-25:2020, IDT - Part 25: Mixtures of polyester with certain other fibres (method using trichloroacetic acid and chloroform)
BAS/TC 48 prBAS EN ISO 1833-29:2021 EN ISO 1833-29:2020, IDT; ISO Textiles - Quantitative chemical analysis pr en 59.060.01 10.99 1833-29:2020, IDT - Part 29: Mixtures of polyamide with polypropylene/polyamide bicomponent (method using sulfuric acid)
BAS/TC 48 prBAS EN ISO 1833-28:2021 EN ISO 1833-28:2020, IDT; ISO Textiles - Quantitative chemical analysis pr en 59.060.01 10.99 1833-28:2019, IDT - Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid) BAS/TC 48 prBAS ISO 105-F06:2021 ISO 105-F06:2000, IDT Textiles - Tests for colour fastness - Part ko en 59.080.01 10.99 F06: Specification for silk adjacent fabric
223 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 48 prBAS ISO 105-F01:2021 ISO 105-F01:2001, IDT Textiles - Tests for colour fastness - Part ko en 59.080.01 10.99 F01: Specification for wool adjacent fabric BAS/TC 48 prBAS ISO 105-F03:2021 ISO 105-F03:2001, IDT Textiles - Tests for colour fastness - Part ko en 59.080.01 10.99 F03: Specification for polyamide adjacent fabric BAS/TC 48 prBAS ISO 105-F04:2021 ISO 105-F04:2001, IDT Textiles - Tests for colour fastness - Part ko en 59.080.01 10.99 F04: Specification for polyester adjacent fabric BAS/TC 48 prBAS ISO 105-F05:2021 ISO 105-F05:2001, IDT Textiles - Tests for colour fastness - Part ko en 59.080.01 10.99 F05: Specification for acrylic adjacent fabric BAS/TC 48 prBAS ISO 105-F07:2021 ISO 105-F07:2001, IDT Textiles - Tests for colour fastness - Part ko en 59.080.01 10.99 F07: Specification for secondary acetate adjacent fabric BAS/TC 48 prBAS ISO 105-F02:2021 ISO 105-F02:2009, IDT Textiles - Tests for colour fastness - Part ko en 59.080.01 10.99 F02: Specification for cotton and viscose adjacent fabrics BAS/TC 48 prBAS ISO 105-F09:2021 ISO 105-F09:2009, IDT Textiles - Tests for colour fastness - Part ko en 59.080.01 10.99 F09: Specification for cotton rubbing cloth BAS/TC 48 prBAS ISO 105-F10/A1:2021 ISO 105-F10:1989/Amd 1:2009, Textiles - Tests for colour fastness - Part ko en 59.080.01 10.99 IDT F10: Specification for adjacent fabric: Multifibre - Amendment A1 BAS/TC 49 prBAS CEN/TS 17441:2021 CEN/TS 17441:2020, IDT Laboratory installations - Ventilation pr en 91.140.30, 10.99 systems in laboratories 71.040.10 BAS/TC 49 prBAS EN ISO 24444:2021 EN ISO 24444:2020, IDT; ISO Cosmetics - Sun protection test pr en 71.100.70 10.99 24444:2019, IDT methods - In vivo determination of the sun protection factor (SPF) BAS/TC 49 prBAS ISO 16413:2021 ISO 16413:2020, IDT Evaluation of thickness, density and ko en 71.040.40, 10.99 interface width of thin films by X-ray 35.240.70 reflectometry - Instrumental requirements, alignment and positioning, data collection, data analysis and reporting BAS/TC 49 prBAS ISO/TS 15338:2021 ISO/TS 15338:2020, IDT Surface chemical analysis - Glow ko en 71.040.40 10.99 discharge mass spectrometry - Operating procedures
224 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 49 prBAS ISO 21222:2021 ISO 21222:2020, IDT Surface chemical analysis - Scanning ko en 71.040.40 10.99 probe microscopy - Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method BAS/TC 49 prBAS EN 17122:2021 EN 17122:2019, IDT Chemical disinfectants and antiseptics - pr en 11.080.20 10.99 Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements - Phase2, step2 BAS/TC 49 prBAS EN 17272:2021 EN 17272:2020, IDT Chemical disinfectants and antiseptics - pr en 11.080.20, 10.99 Methods of airborne room disinfection 71.100.35 by automated process - Determination of bactericidal, mycobactericidal, sporicidal, fungicidal, yeasticidal, virucidal and phagocidal activities BAS/TC 49 prBAS ISO/TR 14187:2021 ISO/TR 14187:2020, IDT Surface chemical analysis - ko en 71.040.40 10.99 Characterization of nanostructured materials BAS/TC 49 prBAS ISO 16217:2021 ISO 16217:2020, IDT Cosmetics - Sun protection test ko en 71.100.70 10.99 methods - Water immersion procedure for determining water resistance BAS/TC 49 prBAS ISO 18861:2021 ISO 18861:2020, IDT Cosmetics - Sun protection test ko en 71.100.70 10.99 methods - Percentage of water resistance BAS/TC 49 prBAS ISO 21322:2021 ISO 21322:2020, IDT Cosmetics - Microbiology - Testing of ko en 07.100.40 10.99 impregnated or coated wipes and masks
BAS/TC 49 prBAS ISO/TS 22176:2021 ISO/TS 22176:2020, IDT Cosmetics - Analytical methods - ko en 71.100.70 10.99 Development of a global approach for validation of quantitative analytical methods BAS/TC 49 prBAS ISO 685:2021 ISO 685:2020, IDT Analysis of soaps - Determination of ko en 71.100.40 10.99 total alkali content and total fatty matter content
225 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 49 prBAS ISO 16531:2021 ISO 16531:2020, IDT Surface chemical analysis - Depth ko en 71.040.40 10.99 profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS BAS/TC 49 prBAS ISO 14420:2021 ISO 14420:2020, IDT Carbonaceous products for the ko en 71.100.10 10.99 production of aluminium - Baked anodes and shaped carbon products - Determination of the coefficient of linear thermal expansion BAS/TC 49 prBAS ISO 22731:2021 ISO 22731:2020, IDT Carbonaceous materials used in the ko en 71.100.10 10.99 production of aluminium - Cathode - Cathode abrasion testing BAS/TC 49 prBAS ISO 14428:2021 ISO 14428:2019, IDT Carbonaceous materials for the ko en 71.100.10 10.99 production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking BAS/TC 49 prBAS ISO 15379-1:2021 ISO 15379-1:2019, IDT Carbonaceous materials for the ko en 71.100.10 10.99 production of aluminium - Cathode block materials - Part 1: Determination of the expansion due to sodium penetration with application of pressure
BAS/TC 50 prBAS EN 12301:2021 EN 12301:2019, IDT Plastics and rubber machines - pr en 83.200 10.99 Calenders - Safety requirements BAS/TC 50 prBAS EN ISO 20430:2021 EN ISO 20430:2020, IDT; ISO Plastics and rubber machines - Injection pr en 83.200 10.99 20430:2020, IDT moulding machines - Safety requirements BAS/TC 50 prBAS EN ISO 3949:2021 EN ISO 3949:2020, IDT; ISO Plastics hoses and hose assemblies - pr en 83.140.40, 10.99 3949:2020, IDT Textile-reinforced types for hydraulic 23.100.40 applications - Specification BAS/TC 50 prBAS EN ISO 8031:2021 EN ISO 8031:2020, IDT; ISO Rubber and plastics hoses and hose pr en 23.040.70 10.99 8031:2020, IDT assemblies - Determination of electrical resistance and conductivity
226 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 50 prBAS EN 13766+A1:2021 EN 13766:2018+A1:2020, IDT Thermoplastic multi-layer (non- pr en 23.040.70 10.99 vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
BAS/TC 50 prBAS EN ISO 16929:2021 EN ISO 16929:2019, IDT; ISO Plastics - Determination of the degree of pr en 83.080.01 10.99 16929:2019, IDT disintegration of plastic materials under defined composting conditions in a pilot- scale test BAS/TC 50 prBAS EN ISO 23153-2:2021 EN ISO 23153-2:2020, IDT; ISO Plastics - Polyetheretherketone (PEEK) pr en 83.080.20 10.99 23153-2:2020, IDT moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
BAS/TC 50 prBAS EN ISO 23153-1:2021 EN ISO 23153-1:2020, IDT; ISO Plastics - Polyetheretherketone (PEEK) pr en 83.080.20 10.99 23153-1:2020, IDT moulding and extrusion materials - Part 1: Designation system and basis for specifications BAS/TC 50 prBAS EN ISO 179-2:2021 EN ISO 179-2:2020, IDT; ISO Plastics - Determination of Charpy pr en 83.080.01 10.99 179-2:2020, IDT impact properties - Part 2: Instrumented impact test BAS/TC 50 prBAS EN 13067:2021 EN 13067:2020, IDT Plastics welding personnel - pr en 25.160.10, 10.99 Qualification of welders - 03.100.30 Thermoplastics welded assemblies BAS/TC 50 prBAS CEN ISO/TR 21960:2021 CEN ISO/TR 21960:2020, IDT; Plastics - Environmental aspects - State pr en 83.080.20, 10.99 ISO/TR 21960:2020, IDT of knowledge and methodologies 83.080.01, 13.020.01 BAS/TC 50 prBAS EN ISO 294-3:2021 EN ISO 294-3:2020, IDT; ISO Plastics - Injection moulding of test pr en 83.080.20 10.99 294-3:2020, IDT specimens of thermoplastic materials - Part 3: Small plates BAS/TC 50 prBAS EN ISO 11357-2:2021 EN ISO 11357-2:2020, IDT; ISO Plastics - Differential scanning pr en 83.080.01 10.99 11357-2:2020, IDT calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height BAS/TC 50 prBAS EN ISO 2440:2021 EN ISO 2440:2019, IDT; ISO Flexible and rigid cellular polymeric pr en 83.100 10.99 2440:2019, IDT materials - Accelerated ageing tests
227 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 50 prBAS EN ISO 75-1:2021 EN ISO 75-1:2020, IDT; ISO 75- Plastics - Determination of temperature pr en 83.080.01 10.99 1:2020, IDT of deflection under load - Part 1: General test method BAS/TC 50 prBAS EN ISO 24022-2:2021 EN ISO 24022-2:2020, IDT; ISO Plastics - Polystyrene (PS) moulding pr en 83.080.20 10.99 24022-2:2020, IDT and extrusion materials - Part 2: Preparation of test specimens and determination of properties BAS/TC 50 prBAS EN ISO 24023-1:2021 EN ISO 24023-1:2020, IDT; ISO Plastics - Plasticized poly(vinyl chloride) pr en 83.080.20 10.99 24023-1:2020, IDT (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications
BAS/TC 50 prBAS EN ISO 24023-2:2021 EN ISO 24023-2:2020, IDT; ISO Plastics - Plasticized poly(vinyl chloride) pr en 83.080.20 10.99 24023-2:2020, IDT (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties BAS/TC 50 prBAS EN ISO 24025-1:2021 EN ISO 24025-1:2020, IDT; ISO Plastics - Sulfone polymer moulding and pr en 83.080.20 10.99 24025-1:2020, IDT extrusion materials - Part 1: Designation system and basis for specifications
BAS/TC 50 prBAS EN ISO 24025-2:2021 EN ISO 24025-2:2020, IDT; ISO Plastics - Sulfone polymer moulding and pr en 83.080.20 10.99 24025-2:2020, IDT extrusion materials - Part 2: Preparation of test specimens and determination of properties BAS/TC 50 prBAS EN ISO 24026-1:2021 EN ISO 24026-1:2020, IDT; ISO Plastics - Poly(methyl methacrylate) pr en 83.080.20 10.99 24026-1:2020, IDT (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications BAS/TC 50 prBAS EN ISO 24026-2:2021 EN ISO 24026-2:2020, IDT; ISO Plastics - Poly(methyl methacrylate) pr en 83.080.20 10.99 24026-2:2020, IDT (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
228 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 50 prBAS EN ISO 19066-2:2021 EN ISO 19066-2:2020, IDT; ISO Plastics - Methyl methacrylate- pr en 83.080.20 10.99 19066-2:2020, IDT acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties BAS/TC 50 prBAS EN ISO 19064-2:2021 EN ISO 19064-2:2020, IDT; ISO Plastics - Styrene-acrylonitrile (SAN) pr en 83.080.20 10.99 19064-2:2020, IDT moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties BAS/TC 50 prBAS EN ISO 29988-1:2021 EN ISO 29988-1:2019, IDT; ISO Plastics - Polyoxymethylene (POM) pr en 83.080.20 10.99 29988-1:2019, IDT moulding and extrusion materials - Part 1: Designation system and basis for specifications BAS/TC 50 prBAS EN ISO 19679:2021 EN ISO 19679:2020, IDT; ISO Plastics - Determination of aerobic pr en 83.080.01 10.99 19679:2020, IDT biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide BAS/TC 50 prBAS EN 13206+A1:2021 EN 13206:2017+A1:2020, IDT Plastics - Thermoplastic covering films pr en 83.140.10, 10.99 for use in agriculture and horticulture 65.040.30 BAS/TC 50 prBAS EN ISO 1628-2:2021 EN ISO 1628-2:2020, IDT; ISO Plastics - Determination of the viscosity pr en 83.080.20 10.99 1628-2:2020, IDT of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins BAS/TC 50 prBAS EN 12608-1+A1:2021 EN 12608-1:2016+A1:2020, IDT Unplasticized poly(vinyl chloride) (PVC- pr en 91.060.50, 10.99 U) profiles for the fabrication of windows 83.140.99 and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces BAS/TC 50 prBAS EN ISO 180:2021 EN ISO 180:2019, IDT; ISO Plastics - Determination of Izod impact pr en 83.080.01 10.99 180:2019, IDT strength BAS/TC 50 prBAS EN ISO 10350-2:2021 EN ISO 10350-2:2020, IDT; ISO Plastics - Acquisition and presentation pr en 83.120 10.99 10350-2:2020, IDT of comparable single-point data - Part 2: Long-fibre-reinforced plastics
229 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 50 prBAS EN 14848:2021 EN 14848:2020, IDT Aerosol containers - Metal containers pr en 55.130 10.99 with 25,4 mm aperture - Dimensions of valve cups BAS/TC 50 prBAS EN 16293:2021 EN 16293:2020, IDT Packaging - Glass Packaging - Deep pr en 55.100 10.99 BVS finishes for still wines BAS/TC 50 prBAS EN ISO 16106:2021 EN ISO 16106:2020, IDT; ISO Transport packages for dangerous pr en 55.020, 10.99 16106:2020, IDT goods - Dangerous goods packagings, 13.300 intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 BAS/TC 50 prBAS EN ISO 12822:2021 EN ISO 12822:2020, IDT; ISO Glass packaging - 26 H 126 crown finish pr en 55.100 10.99 12822:2020, IDT - Dimensions BAS/TC 50 prBAS EN ISO 4180:2021 EN ISO 4180:2019, IDT; ISO Packaging - Complete, filled transport pr en 55.180.40 10.99 4180:2019, IDT packages - General rules for the compilation of performance test schedules BAS/TC 50 prBAS ISO 5893:2021 ISO 5893:2019, IDT Rubber and plastics test equipment - ko en 83.200 10.99 Tensile, flexural and compression types (constant rate of traverse) - Specification BAS/TC 50 prBAS ISO 5893/A1:2021 ISO 5893:2019/Amd 1:2020, IDT Rubber and plastics test equipment — ko en 83.200 10.99 Tensile, flexural and compression types (constant rate of traverse) — Specification - AMENDMENT 1 BAS/TC 50 prBAS ISO 506:2021 ISO 506:2020, IDT Rubber latex, natural, concentrate - ko en 83.040.10 10.99 Determination of volatile fatty acid number BAS/TC 50 prBAS ISO 17278:2021 ISO 17278:2020, IDT Rubber, raw natural - Determination of ko en 83.040.10 10.99 the gel content of technically specified rubber (TSR) BAS/TC 50 prBAS ISO 4658:2021 ISO 4658:2020, IDT Acrylonitrile-butadiene rubber (NBR) - ko en 83.060 10.99 Evaluation procedure BAS/TC 50 prBAS ISO 8789:2021 ISO 8789:2020, IDT Rubber hoses and hose assemblies for ko en 43.060.40, 10.99 liquefied petroleum gas in motor 83.140.40 vehicles - Specification
230 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 50 prBAS ISO 4079:2021 ISO 4079:2020, IDT Rubber hoses and hose assemblies - ko en 83.140.40, 10.99 Textile-reinforced hydraulic types for oil- 23.100.40 based or water-based fluids - Specification BAS/TC 50 prBAS ISO 1409:2021 ISO 1409:2020, IDT Plastics/rubber - Polymer dispersions ko en 83.040.10, 10.99 and rubber latices (natural and 83.080.01 synthetic) - Determination of surface tension BAS/TC 50 prBAS ISO 6101-2:2021 ISO 6101-2:2019, IDT Rubber - Determination of metal content ko en 83.060 10.99 by atomic absorption spectrometry - Part 2: Determination of lead content
BAS/TC 50 prBAS ISO 7270-1:2021 ISO 7270-1:2020, IDT Rubber - Analysis by pyrolytic gas- ko en 83.060 10.99 chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends) BAS/TC 50 prBAS ISO 17257:2021 ISO 17257:2020, IDT Rubber - Identification of polymers - ko en 83.060 10.99 Pyrolytic gas-chromatographic method using mass-spectrometric detection BAS/TC 50 prBAS ISO 18333:2021 ISO 18333:2014, IDT Pallets for materials handling - Quality of ko en 55.180.20 10.99 new wooden components for flat pallets
BAS/TC 50 prBAS ISO 18334:2021 ISO 18334:2010, IDT Pallets for materials handling - Quality of ko en 55.180.20 10.99 assembly of new wooden pallets BAS/TC 50 prBAS ISO 13194:2021 ISO 13194:2011, IDT Box pallets - Principal requirements and ko en 55.180.20 10.99 test methods BAS/TC 51 prBAS CEN/TR 15232-2:2021 CEN/TR 15232-2:2016, IDT Energy performance of buildings - Part pr en 91.120.10, 10.99 2: Accompanying TR prEN 15232- 97.120, 1:2015 - Modules M10-4,5,6,7,8,9,10 35.240.99 BAS/TC 51 prBAS CEN/TR 16946-2:2021 CEN/TR 16946-2:2016, IDT Energy Performance of Buildings - pr en 97.120 10.99 Inspection of Building Automation, Controls and Technical Building Management - Part 2: Accompanying TR prEN 16946-1:2015 - Modules M10- 11 BAS/TC 51 prBAS CEN/TR 16947-2:2021 CEN/TR 16947-2:2016, IDT Building Management System - Part 2: pr en 91.120.10, 10.99 Accompanying prEN 16947-1:2015 - 97.120 Modules M10-12
231 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS EN 14908-7:2021 EN 14908-7:2019, IDT Open communication in building pr en 35.240.67, 10.99 automation, controls and building 97.120, management - Control Network Protocol 91.140.01 - Part 7: Communication via internet protocols BAS/TC 51 prBAS EN 50212:2021 EN 50212:2020, IDT Connectors for thermoelectric sensors pr en 93.120 10.99 BAS/TC 51 prBAS EN 50325-1:2021 EN 50325-1:2019, IDT Industrial communications subsystem pr en 43.180 10.99 based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements BAS/TC 51 prBAS EN 60730-2-6/A1:2021 EN 60730-2-6:2016/A1:2020, Automatic electrical controls - Part 2-6: pr en,fr 97.120 10.99 IDT; IEC 60730-2- Particular requirements for automatic 6:2015/AMD1:2019, IDT electrical pressure sensing controls including mechanical requirements
BAS/TC 51 prBAS EN 61784-3-12/A1:2021 EN 61784-3-12:2010/A1:2019, Industrial communication networks - pr en,fr 35.100.05, 10.99 IDT; IEC 61784-3- Profiles - Part 3-12: Functional safety 25.040.40 12:2010/AMD1:2019, IDT fieldbuses - Additional specifications for CPF 12 BAS/TC 51 prBAS EN 62657-2/A1:2021 EN 62657-2:2017/A1:2019, IDT; Industrial communication networks - pr en,fr 35.110, 10.99 IEC 62657-2:2017/AMD1:2019, Wireless communication networks - Part 35.100, IDT 2: Coexistence management 33.040.40, 33.040, 25.040.40 BAS/TC 51 prBAS EN 62734/A1:2021 EN 62734:2015/A1:2019, IDT; Industrial networks - Wireless pr en,fr 35.100, 10.99 IEC 62734:2014/AMD1:2019, IDT communication network and 33.170, communication profiles - ISA 100.11a 33.160.60, 33.040, 25.040 BAS/TC 51 prBAS EN IEC 60730-2-11:2021 EN IEC 60730-2-11:2020, IDT; Automatic electrical controls - Part 2-11: pr en,fr 97.120 10.99 IEC 60730-2-11:2019, IDT Particular requirements for energy regulators BAS/TC 51 prBAS EN IEC 60730-2-22:2021 EN IEC 60730-2-22:2020, IDT Automatic electrical controls - Part 2-22: pr en,fr 97.120 10.99 Particular requirements for thermal motor protectors BAS/TC 51 prBAS EN IEC 60730-2-7:2021 EN IEC 60730-2-7:2020, IDT; Automatic electrical controls - Part 2-7: pr en,fr 97.120 10.99 IEC 60730-2-7:2015, IDT Particular requirements for timers and time switches
232 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS EN IEC 60730-2-8:2021 EN IEC 60730-2-8:2020, IDT; Automatic electrical controls for pr en,fr 97.120 10.99 IEC 60730-2-8:2018, IDT household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements BAS/TC 51 prBAS EN IEC 60730-2- EN IEC 60730-2- Automatic electrical controls - Part 2-9: pr en,fr 97.120 10.99 9/A2:2021 9:2019/A2:2020, IDT; IEC 60730- Particular requirements for temperature 2-9:2015/AMD2:2020, IDT sensing controls BAS/TC 51 prBAS EN IEC 61207-2:2021 EN IEC 61207-2:2019, IDT; IEC Expression of performance of gas pr en,fr 71.040.40, 10.99 61207-2:2019, IDT analyzers - Part 2: Measuring oxygen in 71.040.20 gas utilizing high-temperature electrochemical sensors BAS/TC 51 prBAS EN IEC 61804-3:2021 EN IEC 61804-3:2020, IDT; IEC Devices and integration in enterprise pr en,fr 35.240.50, 10.99 61804-3:2020, IDT systems - Function blocks (FB) for 25.040.40 process control and electronic device description language (EDDL) - Part 3: EDDL syntax and semantics BAS/TC 51 prBAS EN IEC 61804-4:2021 EN IEC 61804-4:2020, IDT; IEC Devices and integration in enterprise pr en,fr 35.240.50, 10.99 61804-4:2020, IDT systems - Function blocks (FB) for 25.040.40 process control and electronic device description language (EDDL) - Part 4: EDD interpretation BAS/TC 51 prBAS EN IEC 61804-5:2021 EN IEC 61804-5:2020, IDT; IEC Devices and intergration in enterprise pr en,fr 35.240.50, 10.99 61804-5:2020, IDT systems - Function blocks (FB) for 25.040.40 process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library BAS/TC 51 prBAS EN IEC 62443-3-2:2021 EN IEC 62443-3-2:2020, IDT; Security for industrial automation and pr en,fr 35.030, 10.99 IEC 62443-3-2:2020, IDT control systems - Part 3-2: Security risk 25.040.40 assessment for system design BAS/TC 51 prBAS EN IEC 62443-3- EN IEC 62443-3-3:2019/AC:2019- Industrial communication networks - pr en,fr 35.110, 10.99 3/Cor1:2021 10, IDT Network and system security - Part 3-3: 25.040.40 System security requirements and security levels BAS/TC 51 prBAS EN IEC 62541-10:2021 EN IEC 62541-10:2020, IDT; IEC OPC Unified Architecture - Part 10: pr en,fr 35.100.05, 10.99 62541-10:2020, IDT Programs 35.100, 25.040.40
233 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS EN IEC 62541-11:2021 EN IEC 62541-11:2020, IDT; IEC OPC Unified Architecture - Part 11: pr en,fr 35.100.05, 10.99 62541-11:2020, IDT Historical Access 35.100, 25.040.40 BAS/TC 51 prBAS EN IEC 62541-12:2021 EN IEC 62541-12:2020, IDT; IEC OPC unified architecture - Part 12: pr en,fr 25.040.40 10.99 62541-12:2020, IDT Discovery and global services BAS/TC 51 prBAS EN IEC 62541-13:2021 EN IEC 62541-13:2020, IDT; IEC OPC Unified Architecture - Part 13: pr en,fr 35.100.05, 10.99 62541-13:2020, IDT Aggregates 35.100, 25.040.40 BAS/TC 51 prBAS EN IEC 62541-14:2021 EN IEC 62541-14:2020, IDT; IEC OPC unified architecture - Part 14: pr en,fr 35.100.05, 10.99 62541-14:2020, IDT PubSub 25.040.40 BAS/TC 51 prBAS EN IEC 62541-3:2021 EN IEC 62541-3:2020, IDT; IEC OPC Unified Architecture - Part 3: pr en,fr 35.100.05, 10.99 62541-3:2020, IDT Address Space Model 35.100, 25.040.40 BAS/TC 51 prBAS EN IEC 62541-6:2021 EN IEC 62541-6:2020, IDT; IEC OPC Unified Architecture - Part 6: pr en,fr 35.100.05, 10.99 62541-6:2020, IDT Mappings 35.100, 25.040.40 BAS/TC 51 prBAS EN IEC 62541-7:2021 EN IEC 62541-7:2020, IDT; IEC OPC unified architecture - Part 7: pr en,fr 35.100.05, 10.99 62541-7:2020, IDT Profiles 35.100, 25.040.40 BAS/TC 51 prBAS EN IEC 62541-8:2021 EN IEC 62541-8:2020, IDT; IEC OPC Unified Architecture - Part 8: Data pr en,fr 35.100.05, 10.99 62541-8:2020, IDT Access 35.100, 25.040.40 BAS/TC 51 prBAS EN IEC 62541-9:2021 EN IEC 62541-9:2020, IDT; IEC OPC Unified Architecture - Part 9: pr en,fr 35.100.05, 10.99 62541-9:2020, IDT Alarms and Conditions 35.100, 25.040.40 BAS/TC 51 prBAS EN IEC 62714-4:2021 EN IEC 62714-4:2020, IDT; IEC Engineering data exchange format for pr en,fr 25.040.40 10.99 62714-4:2020, IDT use in industrial automation systems engineering - Automation markup language - Part 4: Logic BAS/TC 51 prBAS EN IEC 62769-103-1:2021 EN IEC 62769-103-1:2020, IDT; Field device integration (FDI) - Part 103- pr en,fr 35.100.05, 10.99 IEC 62769-103-1:2020, IDT 1: Profiles - PROFIBUS 35.100, 25.040.40 BAS/TC 51 prBAS EN IEC 62769-103-4:2021 EN IEC 62769-103-4:2020, IDT; Field device integration (FDI) - Part 103- pr en,fr 35.100.05, 10.99 IEC 62769-103-4:2020, IDT 4: Profiles - PROFINET 35.100, 25.040.40 BAS/TC 51 prBAS EN IEC 62769-109-1:2021 EN IEC 62769-109-1:2020, IDT; Field devices integration (FDI) - Part pr en,fr 35.100.05, 10.99 IEC 62769-109-1:2020, IDT 109-1: Profiles - HART® and 35.100, WirelessHART® 25.040.40
234 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS EN IEC 62890:2021 EN IEC 62890:2020, IDT; IEC Industrial-process measurement, control pr en 25.040.40 10.99 62890:2020, IDT and automation - Life-cycle- management for systems and components BAS/TC 51 prBAS EN ISO 16484-5/A1:2021 EN ISO 16484-5:2017/A1:2020, Building automation and control systems pr en,fr 35.240.67, 10.99 IDT; ISO 16484-5:2017/Amd (BACS) - Part 5: Data communication 91.140.01, 1:2020, IDT protocol - Amendment 1 91.040.01, 35.240.99 BAS/TC 51 prBAS EN ISO 16484-6:2021 EN ISO 16484-6:2020, IDT; ISO Building automation and control systems pr en,fr 35.240.67, 10.99 16484-6:2020, IDT (BACS) - Part 6: Data communication 91.140.01 conformance testing BAS/TC 51 prBAS EN ISO 22510:2021 EN ISO 22510:2020, IDT; ISO Open data communication in building pr en,fr 35.240.67, 10.99 22510:2019, IDT automation, controls and building 91.040.01 management - Home and building electronic systems - KNXnet/IP communication BAS/TC 51 prBAS ISO 10303-101:2021 ISO 10303-101:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 101: Integrated application resource: Draughting
BAS/TC 51 prBAS ISO 10303-105:2021 ISO 10303-105:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 105: Integrated application resource: Kinematics
BAS/TC 51 prBAS ISO 10303-107:2021 ISO 10303-107:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 107: Integrated application resource: Finite element analysis definition relationships
BAS/TC 51 prBAS ISO 10303-1819:2021 ISO 10303-1819:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1819: Application module: Tessellated geometry
235 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO 10303-242:2021 ISO 10303-242:2020, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 242: Application protocol: Managed model-based 3D engineering BAS/TC 51 prBAS ISO 10303-41:2021 ISO 10303-41:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 41: Integrated generic resource: Fundamentals of product description and support
BAS/TC 51 prBAS ISO 10303-42:2021 ISO 10303-42:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 42: Integrated generic resource: Geometric and topological representation
BAS/TC 51 prBAS ISO 10303-44:2021 ISO 10303-44:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 44: Integrated generic resource: Product structure configuration BAS/TC 51 prBAS ISO 10303-45:2021 ISO 10303-45:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 45: Integrated generic resource: Material and other engineering properties
BAS/TC 51 prBAS ISO 10303-46:2021 ISO 10303-46:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 46: Integrated generic resource: Visual presentation
BAS/TC 51 prBAS ISO 10303-47:2021 ISO 10303-47:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 47: Integrated generic resource: Shape variation tolerances
236 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO 10303-515:2021 ISO 10303-515:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 515: Application interpreted construct: Constructive solid geometry BAS/TC 51 prBAS ISO 10303-517:2021 ISO 10303-517:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 517: Application interpreted construct: Mechanical design geometric presentation
BAS/TC 51 prBAS ISO 10303-56:2021 ISO 10303-56:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 56: Integrated general resource: State BAS/TC 51 prBAS ISO 10303-61:2021 ISO 10303-61:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 61: Integrated generic resource: Systems engineering representation BAS/TC 51 prBAS ISO 14649-17:2021 ISO 14649-17:2020, IDT Industrial automation systems and ko en,fr 25.030, 10.99 integration - Physical device control - 25.040.20 Data model for computerized numerical controllers - Part 17: Process data for additive manufacturing
BAS/TC 51 prBAS ISO 15704:2021 ISO 15704:2019, IDT Enterprise modelling and architecture - ko en,fr 25.040.01 10.99 Requirements for enterprise-referencing architectures and methodologies
BAS/TC 51 prBAS ISO 15746-3:2021 ISO 15746-3:2020, IDT Automation systems and integration - ko en,fr 25.040.40 10.99 Integration of advanced process control and optimization capabilities for manufacturing systems - Part 3: Verification and validation
237 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO 15926-10:2021 ISO 15926-10:2019, IDT Industrial automation systems and ko en,fr 75.020, 10.99 integration - Integration of life cycle data 25.040.40 for process plants including oil and gas production facilities - Part 10: Conformance testing BAS/TC 51 prBAS ISO 15926-13:2021 ISO 15926-13:2018, IDT Industrial automation systems and ko en,fr 75.020, 10.99 integration - Integration of life-cycle data 25.040.40 for process plants including oil and gas production facilities - Part 13: Integrated asset planning life-cycle BAS/TC 51 prBAS ISO 16300-1:2021 ISO 16300-1:2018, IDT Automation systems and integration - ko en,fr 25.040.01 10.99 Interoperability of capability units for manufacturing application solutions - Part 1: Interoperability criteria of capability units per application requirements BAS/TC 51 prBAS ISO 16300-2:2021 ISO 16300-2:2019, IDT Automation systems and integration - ko en,fr 25.040.01 10.99 Interoperability of capability units for manufacturing application solutions - Part 2: Capability templates and software unit cataloguing BAS/TC 51 prBAS ISO 16300-4:2021 ISO 16300-4:2019, IDT Automation systems and integration - ko en,fr 25.040.01 10.99 Interoperability of capability units for manufacturing application solutions - Part 4: Capability unit assessment for the manufacturing application requirements BAS/TC 51 prBAS ISO 18646-1:2021 ISO 18646-1:2016, IDT Robotics - Performance criteria and ko en,fr 25.040.30 10.99 related test methods for service robots - Part 1: Locomotion for wheeled robots
BAS/TC 51 prBAS ISO 18828-5:2021 ISO 18828-5:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Standardized procedures for production systems engineering - Part 5: Manufacturing change management BAS/TC 51 prBAS ISO 19440:2021 ISO 19440:2020, IDT Enterprise modelling and architecture - ko en,fr 25.040.40 10.99 Constructs for enterprise modelling
238 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO 19649:2021 ISO 19649:2017, IDT Mobile robots - Vocabulary ko en,fr 25.040.30, 10.99 01.040.25 BAS/TC 51 prBAS ISO 20140-2:2021 ISO 20140-2:2018, IDT Automation systems and integration - ko en,fr 25.040.01 10.99 Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 2: Environmental performance evaluation process BAS/TC 51 prBAS ISO 20242-5:2021 ISO 20242-5:2020, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Service interface for testing applications - Part 5: Application program service interface BAS/TC 51 prBAS ISO 20534:2021 ISO 20534:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Formal semantic models for the configuration of global production networks BAS/TC 51 prBAS ISO 21919-1:2021 ISO 21919-1:2019, IDT Automation systems and integration - ko en,fr 25.040.20 10.99 Interfaces for automated machine tending - Part 1: Overview and fundamental principles BAS/TC 51 prBAS ISO 23952:2021 ISO 23952:2020, IDT Automation systems and integration - ko en,fr 25.040.40 10.99 Quality information framework (QIF) - An integrated model for manufacturing quality information BAS/TC 51 prBAS ISO 8000-115:2021 ISO 8000-115:2018, IDT Data quality - Part 115: Master data: ko en,fr 25.040.40 10.99 Exchange of quality identifiers: Syntactic, semantic and resolution requirements BAS/TC 51 prBAS ISO 8000-116:2021 ISO 8000-116:2019, IDT Data quality - Part 116: Master data: ko en,fr 25.040.40 10.99 Exchange of quality identifiers: Application of ISO 8000-115 to authoritative legal entity identifiers BAS/TC 51 prBAS ISO 8000-2:2021 ISO 8000-2:2020, IDT Data quality - Part 2: Vocabulary ko en,fr 01.040.25, 10.99 25.040.40
239 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO 8000-62:2021 ISO 8000-62:2018, IDT Data quality - Part 62: Data quality ko en,fr 25.040.40 10.99 management: Organizational process maturity assessment: Application of standards relating to process assessment BAS/TC 51 prBAS ISO 8000-63:2021 ISO 8000-63:2019, IDT Data quality - Part 63: Data quality ko en,fr 25.040.40 10.99 management: Process measurement BAS/TC 51 prBAS ISO/TR 16161:2021 ISO/TR 16161:2019, IDT Automation systems and integration - ko en,fr 25.040.40 10.99 Use case of capability profiles for cooperation between manufacturing software units BAS/TC 51 prBAS ISO/TR 18828-1:2021 ISO/TR 18828-1:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Standardized procedures for production systems engineering - Part 1: Overview BAS/TC 51 prBAS ISO/TR 20218-1:2021 ISO/TR 20218-1:2018, IDT Robotics - Safety design for industrial ko en,fr 25.040.30 10.99 robot systems - Part 1: End-effectors BAS/TC 51 prBAS ISO/TR 20218-2:2021 ISO/TR 20218-2:2017, IDT Robotics - Safety design for industrial ko en,fr 25.040.30 10.99 robot systems - Part 2: Manual load/unload stations BAS/TC 51 prBAS ISO/TR 22400-10:2021 ISO/TR 22400-10:2018, IDT Automation systems and integration - ko en,fr 25.040.01 10.99 Key performance indicators (KPIs) for manufacturing operations management - Part 10: Operational sequence description of data acquisition BAS/TC 51 prBAS ISO/TR 23482-1:2021 ISO/TR 23482-1:2020, IDT Robotics - Application of ISO 13482 - ko en,fr 25.040.30 10.99 Part 1: Safety-related test methods BAS/TC 51 prBAS ISO/TR 23482-2:2021 ISO/TR 23482-2:2019, IDT Robotics - Application of ISO 13482 - ko en,fr 25.040.30 10.99 Part 2: Application guidelines BAS/TC 51 prBAS ISO/TS 10303-1001:2021 ISO/TS 10303-1001:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1001: Application module: Appearance assignment
240 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1003:2021 ISO/TS 10303-1003:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1003: Application module: Curve appearance
BAS/TC 51 prBAS ISO/TS 10303-1004:2021 ISO/TS 10303-1004:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1004: Application module: Elemental geometric shape
BAS/TC 51 prBAS ISO/TS 10303-1005:2021 ISO/TS 10303-1005:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1005: Application module: Elemental topology
BAS/TC 51 prBAS ISO/TS 10303-1006:2021 ISO/TS 10303-1006:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1006: Application module: Foundation representation
BAS/TC 51 prBAS ISO/TS 10303-1019:2021 ISO/TS 10303-1019:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1019: Application module: Product view definition
BAS/TC 51 prBAS ISO/TS 10303-1025:2021 ISO/TS 10303-1025:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1025: Application module: Alias identification
BAS/TC 51 prBAS ISO/TS 10303-1026:2021 ISO/TS 10303-1026:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1026: Application module: Assembly structure
241 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1027:2021 ISO/TS 10303-1027:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1027: Application module: Contextual shape positioning
BAS/TC 51 prBAS ISO/TS 10303-1030:2021 ISO/TS 10303-1030:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1030: Application module: Property assignment
BAS/TC 51 prBAS ISO/TS 10303-1032:2021 ISO/TS 10303-1032:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1032: Application module: Shape property assignment
BAS/TC 51 prBAS ISO/TS 10303-1043:2021 ISO/TS 10303-1043:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1043: Application module: Work order BAS/TC 51 prBAS ISO/TS 10303-1050:2021 ISO/TS 10303-1050:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1050: Application module: Dimension tolerance
BAS/TC 51 prBAS ISO/TS 10303-1051:2021 ISO/TS 10303-1051:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1051: Application module: Geometric tolerance
BAS/TC 51 prBAS ISO/TS 10303-1054:2021 ISO/TS 10303-1054:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1054: Application module: Value with unit
242 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1055:2021 ISO/TS 10303-1055:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1055: Application module: Part definition relationship
BAS/TC 51 prBAS ISO/TS 10303-1058:2021 ISO/TS 10303-1058:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1058: Application module: Configuration effectivity
BAS/TC 51 prBAS ISO/TS 10303-1091:2021 ISO/TS 10303-1091:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1091: Application module: Maths space
BAS/TC 51 prBAS ISO/TS 10303-1092:2021 ISO/TS 10303-1092:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1092: Application module: Maths value BAS/TC 51 prBAS ISO/TS 10303-1103:2021 ISO/TS 10303-1103:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1103: Application module: Product class
BAS/TC 51 prBAS ISO/TS 10303-1104:2021 ISO/TS 10303-1104:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1104: Application module: Specified product
BAS/TC 51 prBAS ISO/TS 10303-1105:2021 ISO/TS 10303-1105:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1105: Application module: Multi linguism
243 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1109:2021 ISO/TS 10303-1109:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1109: Application module: Alternative solution
BAS/TC 51 prBAS ISO/TS 10303-1110:2021 ISO/TS 10303-1110:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1110: Application module: Surface conditions
BAS/TC 51 prBAS ISO/TS 10303-1111:2021 ISO/TS 10303-1111:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1111: Application module: Classification with attributes
BAS/TC 51 prBAS ISO/TS 10303-1112:2021 ISO/TS 10303-1112:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1112: Application module: Specification control
BAS/TC 51 prBAS ISO/TS 10303-1114:2021 ISO/TS 10303-1114:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1114: Application module: Classification assignment
BAS/TC 51 prBAS ISO/TS 10303-1118:2021 ISO/TS 10303-1118:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1118: Application module: Measure representation
BAS/TC 51 prBAS ISO/TS 10303-1126:2021 ISO/TS 10303-1126:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1126: Application module: Document properties
244 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1127:2021 ISO/TS 10303-1127:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1127: Application module: File identification
BAS/TC 51 prBAS ISO/TS 10303-1128:2021 ISO/TS 10303-1128:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1128: Application module: External item identification assignment BAS/TC 51 prBAS ISO/TS 10303-1131:2021 ISO/TS 10303-1131:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1131: Application module: Construction geometry
BAS/TC 51 prBAS ISO/TS 10303-1147:2021 ISO/TS 10303-1147:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1147: Application module: Manufacturing configuration effectivity BAS/TC 51 prBAS ISO/TS 10303-1231:2021 ISO/TS 10303-1231:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1231: Application module: Product data management
BAS/TC 51 prBAS ISO/TS 10303-1241:2021 ISO/TS 10303-1241:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1241: Application module: Information rights
BAS/TC 51 prBAS ISO/TS 10303-1250:2021 ISO/TS 10303-1250:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1250: Application module: Attachment slot
245 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1251:2021 ISO/TS 10303-1251:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1251: Application module: Interface BAS/TC 51 prBAS ISO/TS 10303-1253:2021 ISO/TS 10303-1253:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1253: Application module: Condition BAS/TC 51 prBAS ISO/TS 10303-1256:2021 ISO/TS 10303-1256:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1256: Application module: State observed
BAS/TC 51 prBAS ISO/TS 10303-1259:2021 ISO/TS 10303-1259:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1259: Application module: Activity as realized
BAS/TC 51 prBAS ISO/TS 10303-1288:2021 ISO/TS 10303-1288:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1288: Application module: Management resource information BAS/TC 51 prBAS ISO/TS 10303-1290:2021 ISO/TS 10303-1290:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1290: Application module: Document management
BAS/TC 51 prBAS ISO/TS 10303-1311:2021 ISO/TS 10303-1311:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1311: Application module: Associative draughting elements BAS/TC 51 prBAS ISO/TS 10303-1316:2021 ISO/TS 10303-1316:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1316: Application module: Camera view 3D
246 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1321:2021 ISO/TS 10303-1321:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1321: Application module: Swept solid BAS/TC 51 prBAS ISO/TS 10303-1348:2021 ISO/TS 10303-1348:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1348: Application module: Requirement management
BAS/TC 51 prBAS ISO/TS 10303-1349:2021 ISO/TS 10303-1349:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1349: Application module: Incomplete data reference mechanism BAS/TC 51 prBAS ISO/TS 10303-1362:2021 ISO/TS 10303-1362:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1362: Application module: Dimension and tolerance callouts BAS/TC 51 prBAS ISO/TS 10303-1374:2021 ISO/TS 10303-1374:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1374: Application module: Analysis shape
BAS/TC 51 prBAS ISO/TS 10303-1379:2021 ISO/TS 10303-1379:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1379: Application module: Cfd specified general property
BAS/TC 51 prBAS ISO/TS 10303-1383:2021 ISO/TS 10303-1383:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1383: Application module: Finite elements
247 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1386:2021 ISO/TS 10303-1386:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1386: Application module: Mesh topology
BAS/TC 51 prBAS ISO/TS 10303-1397:2021 ISO/TS 10303-1397:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1397: Application module: Conditional effectivity
BAS/TC 51 prBAS ISO/TS 10303-1402:2021 ISO/TS 10303-1402:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1402: Application module: Same as external item
BAS/TC 51 prBAS ISO/TS 10303-1469:2021 ISO/TS 10303-1469:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1469: Application module: Foundation state definition
BAS/TC 51 prBAS ISO/TS 10303-1473:2021 ISO/TS 10303-1473:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1473: Application module: Description assignment
BAS/TC 51 prBAS ISO/TS 10303-1475:2021 ISO/TS 10303-1475:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1475: Application module: Analysis characterized
BAS/TC 51 prBAS ISO/TS 10303-1488:2021 ISO/TS 10303-1488:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1488: Application module: Verification and validation
248 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1523:2021 ISO/TS 10303-1523:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1523: Application module: Shape data quality criteria
BAS/TC 51 prBAS ISO/TS 10303-1603:2021 ISO/TS 10303-1603:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1603: Application module: Analytical model
BAS/TC 51 prBAS ISO/TS 10303-1628:2021 ISO/TS 10303-1628:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1628: Application module: Design product data management BAS/TC 51 prBAS ISO/TS 10303-1635:2021 ISO/TS 10303-1635:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1635: Application module: Assembly functional interface requirement BAS/TC 51 prBAS ISO/TS 10303-1641:2021 ISO/TS 10303-1641:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1641: Application module: Assembly module with subassembly BAS/TC 51 prBAS ISO/TS 10303-1646:2021 ISO/TS 10303-1646:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1646: Application module: Footprint definition
BAS/TC 51 prBAS ISO/TS 10303-1647:2021 ISO/TS 10303-1647:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1647: Application module: Assembly physical interface requirement
249 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1649:2021 ISO/TS 10303-1649:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1649: Application module: Assembly technology
BAS/TC 51 prBAS ISO/TS 10303-1652:2021 ISO/TS 10303-1652:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1652: Application module: Basic geometry
BAS/TC 51 prBAS ISO/TS 10303-1656:2021 ISO/TS 10303-1656:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1656: Application module: Component grouping
BAS/TC 51 prBAS ISO/TS 10303-1657:2021 ISO/TS 10303-1657:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1657: Application module: Component feature
BAS/TC 51 prBAS ISO/TS 10303-1722:2021 ISO/TS 10303-1722:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1722: Application module: Part template
BAS/TC 51 prBAS ISO/TS 10303-1731:2021 ISO/TS 10303-1731:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1731: Application module: Constructive solid geometry 2D
BAS/TC 51 prBAS ISO/TS 10303-1732:2021 ISO/TS 10303-1732:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1732: Application module: Physical unit usage view
250 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1733:2021 ISO/TS 10303-1733:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1733: Application module: Planned characteristic
BAS/TC 51 prBAS ISO/TS 10303-1739:2021 ISO/TS 10303-1739:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1739: Application module: Production rule
BAS/TC 51 prBAS ISO/TS 10303-1764:2021 ISO/TS 10303-1764:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1764: Application module: Shape feature
BAS/TC 51 prBAS ISO/TS 10303-1765:2021 ISO/TS 10303-1765:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1765: Application module: Characterizable object
BAS/TC 51 prBAS ISO/TS 10303-1767:2021 ISO/TS 10303-1767:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1767: Application module: Composite constituent shape
BAS/TC 51 prBAS ISO/TS 10303-1770:2021 ISO/TS 10303-1770:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1770: Application module: Part and zone laminate tables
BAS/TC 51 prBAS ISO/TS 10303-1782:2021 ISO/TS 10303-1782:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1782: Application module: Qualified measure
251 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1790:2021 ISO/TS 10303-1790:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1790: Application module: Parameterization and variational representation
BAS/TC 51 prBAS ISO/TS 10303-1791:2021 ISO/TS 10303-1791:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1791: Application module: Primitive solids
BAS/TC 51 prBAS ISO/TS 10303-1792:2021 ISO/TS 10303-1792:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1792: Application module: Sketch BAS/TC 51 prBAS ISO/TS 10303-1796:2021 ISO/TS 10303-1796:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1796: Application module: Kinematic motion representation BAS/TC 51 prBAS ISO/TS 10303-1803:2021 ISO/TS 10303-1803:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1803: Application module: Process plan
BAS/TC 51 prBAS ISO/TS 10303-1804:2021 ISO/TS 10303-1804:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1804: Application module: Product as individual assembly and test BAS/TC 51 prBAS ISO/TS 10303-1806:2021 ISO/TS 10303-1806:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1806: Application module: Form feature in panel
252 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1807:2021 ISO/TS 10303-1807:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1807: Application module: Part shape BAS/TC 51 prBAS ISO/TS 10303-1809:2021 ISO/TS 10303-1809:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1809: Application module: Default setting association
BAS/TC 51 prBAS ISO/TS 10303-1811:2021 ISO/TS 10303-1811:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1811: Application module: Product and manufacturing information with nominal 3D models
BAS/TC 51 prBAS ISO/TS 10303-1812:2021 ISO/TS 10303-1812:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1812: Application module: Product and manufacturing annotation presentation BAS/TC 51 prBAS ISO/TS 10303-1813:2021 ISO/TS 10303-1813:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1813: Application module: Parametric representation
BAS/TC 51 prBAS ISO/TS 10303-1814:2021 ISO/TS 10303-1814:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1814: Application module: Machining features
BAS/TC 51 prBAS ISO/TS 10303-1815:2021 ISO/TS 10303-1815:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1815: Application module: Mating structure
253 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1816:2021 ISO/TS 10303-1816:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1816: Application module: Model based 3D geometrical dimensioning and tolerancing representation BAS/TC 51 prBAS ISO/TS 10303-1820:2021 ISO/TS 10303-1820:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1820: Application module: Point direction model
BAS/TC 51 prBAS ISO/TS 10303-1823:2021 ISO/TS 10303-1823:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1823: Application module: Product view definition reference BAS/TC 51 prBAS ISO/TS 10303-1824:2021 ISO/TS 10303-1824:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1824: Application module: Change management
BAS/TC 51 prBAS ISO/TS 10303-1826:2021 ISO/TS 10303-1826:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1826: Application module: Physical connectivity layout topology requirement
BAS/TC 51 prBAS ISO/TS 10303-1827:2021 ISO/TS 10303-1827:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1827: Application module: Extruded structure cross section BAS/TC 51 prBAS ISO/TS 10303-1828:2021 ISO/TS 10303-1828:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1828: Application module: Wiring harness assembly design
254 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1829:2021 ISO/TS 10303-1829:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1829: Application module: Assembly module with packaged component BAS/TC 51 prBAS ISO/TS 10303-1830:2021 ISO/TS 10303-1830:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1830: Application module: Edge based topological representation with length BAS/TC 51 prBAS ISO/TS 10303-1831:2021 ISO/TS 10303-1831:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1831: Application module: Scan data 3D shape
BAS/TC 51 prBAS ISO/TS 10303-1834:2021 ISO/TS 10303-1834:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1834: Application module: Surface visual texture
BAS/TC 51 prBAS ISO/TS 10303-1835:2021 ISO/TS 10303-1835:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1835: Application module: Additive manufacturing part and build information
BAS/TC 51 prBAS ISO/TS 10303-1836:2021 ISO/TS 10303-1836:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1836: Application module: Vertex colours for tessellated geometry BAS/TC 51 prBAS ISO/TS 10303-1837:2021 ISO/TS 10303-1837:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1837: Application module: Product data equivalence definition
255 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-1838:2021 ISO/TS 10303-1838:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1838: Application module: Annotated 3D model equivalence criteria BAS/TC 51 prBAS ISO/TS 10303-1839:2021 ISO/TS 10303-1839:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1839: Application module: Annotated 3D model equivalence inspection result
BAS/TC 51 prBAS ISO/TS 10303-1840:2021 ISO/TS 10303-1840:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1840: Application module: Annotated 3D model equivalence shape BAS/TC 51 prBAS ISO/TS 10303-1841:2021 ISO/TS 10303-1841:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1841: Application module: Annotated 3D model equivalence assembly BAS/TC 51 prBAS ISO/TS 10303-1844:2021 ISO/TS 10303-1844:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1844: Application module: General design connectivity
BAS/TC 51 prBAS ISO/TS 10303-1845:2021 ISO/TS 10303-1845:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1845: Application module: Wire and cable design connectivity BAS/TC 51 prBAS ISO/TS 10303-1846:2021 ISO/TS 10303-1846:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 1846: Application module: Mechanical design features and requirements
256 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 51 prBAS ISO/TS 10303-3001:2021 ISO/TS 10303-3001:2018, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 3001: Business object model: Managed model based 3d engineering BAS/TC 51 prBAS ISO/TS 10303-410:2021 ISO/TS 10303-410:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 410: Application module: AP210 electronic assembly interconnect and packaging design
BAS/TC 51 prBAS ISO/TS 10303-442:2021 ISO/TS 10303-442:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 442: Application module: AP242 managed model based 3D engineering BAS/TC 51 prBAS ISO/TS 10303-4442:2021 ISO/TS 10303-4442:2019, IDT Industrial automation systems and ko en,fr 25.040.40 10.99 integration - Product data representation and exchange - Part 4442: Domain model: Managed model based 3D engineering domain BAS/TC 51 prBAS ISO/TS 15926-12:2021 ISO/TS 15926-12:2018, IDT Industrial automation systems and ko en,fr 75.020, 10.99 integration - Integration of life-cycle data 25.040.40 for process plants including oil and gas production facilities - Part 12: Life-cycle integration ontology represented in Web Ontology Language (OWL)
BAS/TC 51 prBAS ISO/TS 18101-1:2021 ISO/TS 18101-1:2019, IDT Automation systems and integration - Oil ko en,fr 75.020, 10.99 and gas interoperability - Part 1: 25.040.40 Overview and fundamental principles BAS/TC 51 prBAS ISO/TS 8000-60:2021 ISO/TS 8000-60:2017, IDT Data quality - Part 60: Data quality ko en,fr 25.040.40 10.99 management: Overview BAS/TC 51 prBAS ISO/TS 8000-65:2021 ISO/TS 8000-65:2020, IDT Data quality - Part 65: Data quality ko en,fr 25.040.40 10.99 management: Process measurement questionnaire
257 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 52 prBAS CLC/TR 63201:2021 CLC IEC/TR 63201:2020, IDT; Low-voltage switchgear and controlgear - pr en 29.130.20 10.99 IEC TR 63201:2019, IDT Guidance for the development of embedded software BAS/TC 52 prBAS CLC/TR 63216:2021 CLC/IEC TR 63216:2020, IDT; Low-voltage switchgear and controlgear - pr en 29.130.20 10.99 IEC TR 63216:2019, IDT Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies
BAS/TC 52 prBAS EN 60947-2/A1:2021 EN 60947-2:2017/A1:2020, IDT; Low-voltage switchgear and controlgear - pr en,fr 29.130.20 10.99 IEC 60947-2:2016/AMD1:2019, Part 2: Circuit-breakers IDT BAS/TC 52 prBAS EN 60947-5-1/Cor 2:2021 EN 60947-5-1:2017/AC:2020-05, Low-voltage switchgear and controlgear - pr en,fr 29.130.20, 10.99 IDT; IEC 60947-5- Part 5-1: Control circuit devices and 29.120.40 1:2016/COR2:2020, IDT switching elements - Electromechanical control circuit devices
BAS/TC 52 prBAS EN 62026-2/A1:2021 EN 62026-2:2013/A1:2019, IDT; Low-voltage switchgear and controlgear - pr en,fr 29.130.20 10.99 IEC 62026-2:2008/AMD1:2019, Controller-device interfaces (CDIs) - IDT Part 2: Actuator sensor interface (AS-i)
BAS/TC 52 prBAS EN 62026-3/A11:2021 EN 62026-3:2015/A11:2020, IDT Low-voltage switchgear and controlgear - pr en 29.130.20 10.99 Controller-device interfaces (CDIs) - Part 3: DeviceNet BAS/TC 52 prBAS EN 62026-3/Cor 1:2021 EN 62026-3:2015/AC:2019-12, Low-voltage switchgear and controlgear - pr en,fr 29.130.20 10.99 IDT; IEC 62026- Controller-device interfaces (CDIs) - 3:2014/COR2:2019, IDT Part 3: DeviceNet BAS/TC 52 prBAS EN IEC 60947-4-1/Cor EN IEC 60947-4-1:2019/AC:2020- Low-voltage switchgear and controlgear - pr en,fr 29.130.20, 10.99 1:2021 05, IDT; IEC 60947-4- Part 4-1: Contactors and motor-starters - 29.120.99 1:2018/COR1:2020, IDT Electromechanical contactors and motor- starters BAS/TC 52 prBAS EN IEC 60947-5-2:2021 EN IEC 60947-5-2:2020, IDT; Low-voltage switchgear and controlgear - pr en,fr 29.130.20, 10.99 IEC 60947-5-2:2019, IDT Part 5-2: Control circuit devices and 29.120.40 switching elements - Proximity switches
258 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 52 prBAS EN IEC 61439-7:2021 EN IEC 61439-7:2020, IDT; IEC Low-voltage switchgear and controlgear pr en,fr 29.130.20 10.99 61439-7:2018/COR1:2019, IDT; assemblies - Part 7: Assemblies for IEC 61439-7:2018, IDT specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
BAS/TC 52 prBAS EN IEC 62271-104:2021 EN IEC 62271-104:2020, IDT; High-voltage switchgear and controlgear pr en,fr 29.130.10, 10.99 IEC 62271-104:2020, IDT - Part 104: Alternating current switches 29.130.99 for rated voltages higher than 52 kV
BAS/TC 52 prBAS EN IEC 62271-108:2021 EN IEC 62271-108:2020, IDT; High-voltage switchgear and controlgear pr en,fr 29.130.10 10.99 IEC 62271-108:2020, IDT - Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages above 52 kV
BAS/TC 52 prBAS IEC TR 60890:2021 IEC TR 60890:2014, IDT A method of temperature-rise pr en,fr 29.130.20 10.99 verification of low-voltage switchgear and controlgear assemblies by calculation BAS/TC 52 prBAS IEC TR 61439-0:2021 IEC TR 61439-0:2013, IDT Low-voltage switchgear and controlgear pr en,fr 29.130.20 10.99 assemblies - Part 0: Guidance to specifying assemblies BAS/TC 52 prBAS IEC TR 61641:2021 IEC TR 61641:2014, IDT Enclosed low-voltage switchgear and pr en,fr 29.130.20 10.99 controlgear assemblies - Guide for testing under conditions of arcing due to internal fault BAS/TC 52 prBAS IEC TR 62271-302:2021 IEC TR 62271-302:2010, IDT High-voltage switchgear and controlgear pr en,fr 29.130.10 10.99 - Part 302: Alternating current circuit- breakers with intentionally non- simultaneous pole operation
BAS/TC 52 prBAS IEC TR 62271-306:2021 IEC TR 62271-306:2012, IDT High-voltage switchgear and controlgear pr en 29.130.10 10.99 - Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related to alternating current circuit- breakers BAS/TC 52 prBAS IEC TS 61936-2:2021 IEC TS 61936-2:2015, IDT Power installations exceeding 1 kV a.c. pr en 29.020, 10.99 and 1,5 kV d.c. - Part 2: d.c. 29.080.01
259 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 52 prBAS IEC TS 62271-210:2021 IEC TS 62271-210:2013, IDT High-voltage switchgear and controlgear pr en,fr 29.130.10 10.99 - Part 210: Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV
BAS/TC 52 prBAS IEC TS 63208:2021 IEC TS 63208:2020, IDT Low-voltage switchgear and controlgear - pr en 29.130.20 10.99 Security aspects BAS/TC 53 prBAS CEN/TS 1401-2:2021 CEN/TS 1401-2:2020, IDT Plastics piping systems for non-pressure pr en 23.040.01 10.99 underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC- U) - Part 2: Guidance for the assessment of conformity BAS/TC 53 prBAS CEN/TS 1451-2:2021 CEN/TS 1451-2:2019, IDT Plastic piping systems for soil and waste pr en 91.140.80, 10.99 discharge (low and high temperature) 23.040.20 within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
BAS/TC 53 prBAS CEN/TS 1519-2:2021 CEN/TS 1519-2:2020, IDT Plastic piping systems for soil and waste pr en 91.140.80, 10.99 discharge (low and high temperature) 23.040.20, within the building structure - 23.040.01 Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
BAS/TC 53 prBAS CEN/TS 13476-4:2021 CEN/TS 13476-4:2019, IDT Plastics piping systems for non-pressure pr en 93.030, 10.99 underground drainage and sewerage - 23.040.20 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC- U), polypropylene (PP) and polyethylene (PE) - Part 4: Assessment of conformity
BAS/TC 53 prBAS EN ISO 5167-6:2021 EN ISO 5167-6:2019, IDT; ISO Measurement of fluid flow by means of pr en 17.120.10 10.99 5167-6:2019, IDT pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters
260 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 53 prBAS CEN/TS 1852-2:2021 CEN/TS 1852-2:2019, IDT Plastics piping systems for non-pressure pr en 93.030, 10.99 underground drainage and sewerage - 23.040.01 Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
BAS/TC 53 prBAS EN 13598-1:2021 EN 13598-1:2020, IDT Plastics piping systems for non-pressure pr en 23.040.05, 10.99 underground drainage and sewerage - 93.030, Unplasticized poly(vinyl chloride) (PVC- 23.040.20 U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
BAS/TC 53 prBAS EN 13598-2:2021 EN 13598-2:2020, IDT Plastics piping systems for non-pressure pr en 23.040.05, 10.99 underground drainage and sewerage - 93.030, Unplasticized poly(vinyl chloride) (PVC- 23.040.20 U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
BAS/TC 53 prBAS EN ISO 20456:2021 EN ISO 20456:2019, IDT; ISO Measurement of fluid flow in closed pr en 17.120.10 10.99 20456:2017, IDT conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids BAS/TC 53 prBAS CEN/TS 17176-7:2021 CEN/TS 17176-7:2020, IDT Plastics piping systems for water supply pr en 91.140.80, 10.99 and for buried and above ground 23.040.01 drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity BAS/TC 53 prBAS EN ISO 13259:2021 EN ISO 13259:2020, IDT; ISO Thermoplastics piping systems for pr en 91.140.80, 10.99 13259:2020, IDT underground non-pressure applications - 23.040.20 Test method for leaktightness of elastomeric sealing ring type joints BAS/TC 53 prBAS EN ISO 20361/A11:2021 EN ISO 20361:2019/A11:2020, Liquid pumps and pumps units - Noise pr en 23.080, 10.99 IDT; ISO 20361:2019, IDT test code - Grades 2 and 3 of accuracy 17.140.20
261 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 53 prBAS EN 13476-2+A1:2021 EN 13476-2:2018+A1:2020, IDT Plastics piping systems for non-pressure pr en 93.030, 10.99 underground drainage and sewerage - 23.040.01 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC- U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
BAS/TC 53 prBAS EN 13476-3+A1:2021 EN 13476-3:2018+A1:2020, IDT Plastics piping systems for non-pressure pr en 93.030, 10.99 underground drainage and sewerage - 23.040.01 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC- U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B BAS/TC 53 prBAS EN 17152-1/Cor1:2021 EN 17152-1:2019/AC:2020, IDT Plastics piping systems for non-pressure pr en 23.040.01 10.99 underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC- U BAS/TC 53 prBAS EN 17038-2/Cor1:2021 EN 17038-2:2019/AC:2020, IDT Pumps - Methods of qualification and pr en 23.080 10.99 verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units BAS/TC 53 prBAS EN IEC 60296:2021 EN IEC 60296:2020, IDT; IEC Fluids for electrotechnical applications - pr en 29.040.10, 10.99 60296:2020, IDT Mineral insulating oils for electrical 29.040 equipment
262 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 53 prBAS ISO 10763:2021 ISO 10763:2019, IDT Hydraulic fluid power - Plain-end, ko en 77.140.75, 10.99 seamless and welded precision steel 23.100.40 tubes - Dimensions and nominal working pressures BAS/TC 53 prBAS ISO 9110-1:2021 ISO 9110-1:2020, IDT Hydraulic fluid power - Measurement ko en 23.100.01 10.99 techniques - Part 1: General measurement principles BAS/TC 53 prBAS ISO 9110-2:2021 ISO 9110-2:2020, IDT Hydraulic fluid power - Measurement ko en 23.100.01 10.99 techniques - Part 2: Measurement of average steady-state pressure in a closed conduit BAS/TC 53 prBAS ISO 6259-2:2021 ISO 6259-2:2020, IDT Thermoplastics pipes - Determination of ko en 23.040.20 10.99 tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high- impact poly(vinyl chloride) (PVC-HI)
BAS/TC 53 prBAS ISO 14743:2021 ISO 14743:2020, IDT Pneumatic fluid power - Push-in ko en 23.100.40 10.99 connectors for thermoplastic tubes BAS/TC 53 prBAS ISO 23309:2021 ISO 23309:2020, IDT Hydraulic fluid power systems - ko en 23.100.40 10.99 Assembled systems - Methods of cleaning lines by flushing BAS/TC 53 prBAS ISO 5598:2021 ISO 5598:2020, IDT Fluid power systems and components - ko en 23.100.01, 10.99 Vocabulary 01.040.23 BAS/TC 53 prBAS ISO 21138-1:2021 ISO 21138-1:2020, IDT Plastics piping systems for non-pressure ko en 93.030, 10.99 underground drainage and sewerage - 91.140.80, Structured-wall piping systems of 23.040.45, unplasticized poly(vinyl chloride) (PVC- 23.040.20 U), polypropylene (PP) and polyethylene (PE) - Part 1: Material specification and performance criteria for pipes, fittings and systems
263 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 53 prBAS ISO 21138-2:2021 ISO 21138-2:2020, IDT Plastics piping systems for non-pressure ko en 93.030, 10.99 underground drainage and sewerage - 91.140.80, Structured-wall piping systems of 23.040.45, unplasticized poly(vinyl chloride) (PVC- 23.040.20 U), polypropylene (PP) and polyethylene (PE) - Part 2: Pipes and fittings with smooth external surface, Type A
BAS/TC 53 prBAS ISO 21138-3:2021 ISO 21138-3:2020, IDT Plastics piping systems for non-pressure ko en 93.030, 10.99 underground drainage and sewerage - 91.140.80, Structured-wall piping systems of 23.040.45, unplasticized poly(vinyl chloride) (PVC- 23.040.20 U), polypropylene (PP) and polyethylene (PE) - Part 3: Pipes and fittings with non- smooth external surface, Type B
BAS/TC 53 prBAS ISO 10770-3:2021 ISO 10770-3:2020, IDT Hydraulic fluid power - Electrically ko en 23.100.50 10.99 modulated hydraulic control valves - Part 3: Test methods for pressure control valves BAS/TC 53 prBAS ISO 8779:2021 ISO 8779:2020, IDT Plastics piping systems - Polyethylene ko en 65.060.35, 10.99 (PE) pipes for irrigation - Specifications 23.040.20
BAS/TC 53 prBAS ISO 8521:2021 ISO 8521:2020, IDT Glass-reinforced thermosetting plastic ko en 23.040.20 10.99 (GRP) pipes - Test methods for the determination of the initial circumferential tensile wall strength BAS/TC 53 prBAS ISO 3966:2021 ISO 3966:2020, IDT Measurement of fluid flow in closed pr en 17.120.10 10.99 conduits - Velocity area method using Pitot static tubes BAS/TC 53 prBAS ISO 16486-1:2021 ISO 16486-1:2020, IDT Plastics piping systems for the supply of ko en 83.140.30, 10.99 gaseous fuels - Unplasticized polyamide 75.200 (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General
264 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 53 prBAS ISO 16486-2:2021 ISO 16486-2:2020, IDT Plastics piping systems for the supply of ko en 83.140.30, 10.99 gaseous fuels - Unplasticized polyamide 75.200 (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes BAS/TC 53 prBAS ISO 16486-3:2021 ISO 16486-3:2020, IDT Plastics piping systems for the supply of ko en 83.140.30, 10.99 gaseous fuels - Unplasticized polyamide 75.200 (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings BAS/TC 54 psBAS EN 12221-1+A1:2020 EN 12221-1:2008+A1:2013, IDT Child use and care articles - Changing pv sr,en 97.190 50.99 units for domestic use - Part 1: Safety requirements BAS/TC 54 prBAS EN 71-7+A3:2021 EN 71-7:2014+A3:2020, IDT Safety of toys - Part 7: Finger paints - pr en 97.200.50 10.99 Requirements and test methods BAS/TC 54 prBAS EN 14988+A1:2021 EN 14988:2017+A1:2020, IDT Children's high chairs - Requirements pr en 97.140, 10.99 and test methods 97.190 BAS/TC 54 prBAS ISO/TR 8124-9:2021 ISO/TR 8124-9:2020, IDT Safety of toys - Part 9: Safety aspects ko en 97.200.50 10.99 related to mechanical and physical properties - Comparison of ISO 8124-1, EN 71-1 and ASTM F963 BAS/TC 54 prBAS ISO 8124-1/A2:2021 ISO 8124-1:2018/Amd 2:2020, Various ko en 97.200.50 10.99 IDT BAS/TC 54 prBAS ISO 8124-1/A1:2021 ISO 8124-1:2018/Amd 1:2020, Flying toys ko en 97.200.50 10.99 IDT BAS/TC 54 prBAS ISO 8124-3:2021 ISO 8124-3:2020, IDT Safety of toys - Part 3: Migration of ko en 97.200.50 10.99 certain elements BAS/TC 54 prBAS ISO 8124-7/A1:2021 ISO 8124-7:2015/Amd 1:2020, Safety of toys —Part 7: Requirements ko en 97.200.50 10.99 IDT and test methods for finger paints - AMENDMENT 1 BAS/TC 54 prBAS EN 14350:2021 EN 14350:2020, IDT Child care articles - Drinking equipment - pr en 97.190 10.99 Safety requirements and test methods
BAS/TC 54 prBAS EN 1273:2021 EN 1273:2020, IDT Child care articles - Baby walking pr en 97.190 10.99 frames - Safety requirements and test methods BAS/TC 55 psBAS ISO 19600:2020 ISO 19600:2014, IDT Compliance management systems - pv hr, en 03.100.70, 50.00 Guidelines 03.100.01
265 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 56 prBAS EN 61400- EN 61400- Wind turbines - Part 11: Acoustic noise pr en,fr 27.180 10.99 11/A1/Cor1:2021 11:2013/A1:2018/AC:2019-11, measurement techniques IDT; IEC 61400- 11:2012/AMD1:2018/COR1:2019 , IDT BAS/TC 56 prBAS EN 61400-12-1/Cor 1:2021 EN 61400-12-1:2017/AC:2019- Wind energy generation systems - Part pr en 27.180 10.99 12, IDT; IEC 61400-12- 12-1: Power performance measurement 1:2017/COR1:2019, IDT of electricity producing wind turbines
BAS/TC 56 prBAS EN 61400-12-1/Cor 2:2021 EN 61400-12-1:2017/AC:2020- Wind energy generation systems - Part pr en,fr 27.180 10.99 04, IDT; IEC 61400-12- 12-1: Power performance 1:2017/COR2:2020, IDT measurements of electricity producing wind turbines BAS/TC 56 prBAS EN 61400-2/Cor 1:2021 EN 61400-2:2014/AC:2019-11, Wind turbines - Part 2: Small wind pr en,fr 27.180 10.99 IDT; IEC 61400- turbines 2:2013/COR1:2019, IDT BAS/TC 56 prBAS EN 61400-22/Cor 1:2021 EN 61400-22:2011/AC:2020-04, Wind turbines - Part 22: Conformity pr en 27.180 10.99 IDT testing and certification BAS/TC 56 prBAS EN 62788-1-6/A1:2021 EN 62788-1-6:2017/A1:2020, Measurement procedures for materials pr en,fr 27.160 10.99 IDT; IEC 62788-1- used in photovoltaic modules - Part 1-6: 6:2017/AMD1:2020, IDT Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate BAS/TC 56 prBAS EN 62852/A1:2021 EN 62852:2015/A1:2020, IDT; Connectors for DC-application in pr en,fr 27.160 10.99 IEC 62852:2014/AMD1:2020, IDT photovoltaic systems - Safety requirements and tests BAS/TC 56 prBAS EN 62920/A11:2021 EN 62920:2017/A11:2020, IDT Photovoltaic power generating systems - pr en 27.160 10.99 EMC requirements and test methods for power conversion equipment
BAS/TC 56 prBAS EN IEC 60034-2-3:2021 EN IEC 60034-2-3:2020, IDT; Rotating electrical machines - Part 2-3: pr en,fr 29.160.01 10.99 IEC 60034-2-3:2020, IDT Specific test methods for determining losses and efficiency of converter-fed AC motors
266 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 56 prBAS EN IEC 60034-3:2021 EN IEC 60034-3:2020, IDT; IEC Rotating electrical machines - Part 3: pr en,fr 29.160.01, 10.99 60034-3:2020, IDT Specific requirements for synchronous 29.160 generators driven by steam turbines or combustion gas turbines and for synchronous compensators BAS/TC 56 prBAS EN IEC 60034-5:2021 EN IEC 60034-5:2020, IDT; IEC Rotating electrical machines - Part 5: pr en 29.160.01, 10.99 60034-5:2020, IDT Degrees of protection provided by the 29.160 integral design of rotating electrical machines (IP code) - Classification BAS/TC 56 prBAS EN IEC 60045-1:2021 EN IEC 60045-1:2020, IDT; IEC Steam turbines - Part 1: Specifications pr en,fr 27.040 10.99 60045-1:2020, IDT BAS/TC 56 prBAS EN IEC 60904-4:2021 EN IEC 60904-4:2019, IDT; IEC Photovoltaic devices - Part 4: Reference pr en,fr 27.160 10.99 60904-4:2019, IDT solar devices - Procedures for establishing calibration traceability BAS/TC 56 prBAS EN IEC 60904-7:2021 EN IEC 60904-7:2019, IDT; IEC Photovoltaic devices - Part 7: pr en,fr 27.160 10.99 60904-7:2019, IDT Computation of the spectral mismatch correction for measurements of photovoltaic devices BAS/TC 56 prBAS EN IEC 61400-1:2020 EN IEC 61400-1:2019/AC:2019- Wind energy generation systems - Part pv bs,en 27.180 20.20 10, IDT; EN IEC 61400-1:2019, 1: Design requirements IDT; IEC 61400- 1:2019/COR1:2019, IDT; IEC 61400-1:2019, IDT BAS/TC 56 prBAS EN IEC 61400-27-1:2021 EN IEC 61400-27-1:2020, IDT; Wind energy generation systems - Part pr en 27.180, 10.99 IEC 61400-27-1:2020, IDT 27-1: Electrical simulation models - 21.180 Generic models BAS/TC 56 prBAS EN IEC 61400-5:2021 EN IEC 61400-5:2020, IDT; IEC Wind energy generation systems - Part pr en,fr 27.180 10.99 61400-5:2020, IDT 5: Wind turbine blades BAS/TC 56 prBAS EN IEC 61400-6:2021 EN IEC 61400-6:2020, IDT; IEC Wind energy generation systems - Part pr en 27.180 10.99 61400-6:2020, IDT 6: Tower and foundation design requirements BAS/TC 56 prBAS EN IEC 61701:2021 EN IEC 61701:2020, IDT; IEC Photovoltaic (PV) modules - Salt mist pr en,fr 27.160 10.99 61701:2020, IDT corrosion testing BAS/TC 56 prBAS EN IEC 62282-2-100:2021 EN IEC 62282-2-100:2020, IDT; Fuel cell technologies - Part 2-100: Fuel pr en,fr 27.070 10.99 IEC 62282-2-100:2020, IDT cell modules - Safety BAS/TC 56 prBAS EN IEC 62282-3-100:2021 EN IEC 62282-3-100:2020, IDT; Fuel cell technologies - Part 3-100: pr en,fr 27.070 10.99 IEC 62282-3-100:2019, IDT Stationary fuel cell power systems - Safety
267 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 56 prBAS EN IEC 62282-8-101:2021 EN IEC 62282-8-101:2020, IDT; Fuel cell technologies - Part 8-101: pr en,fr 27.070 10.99 IEC 62282-8-101:2020, IDT Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation BAS/TC 56 prBAS EN IEC 62282-8-102:2021 EN IEC 62282-8-102:2020, IDT; Fuel cell technologies - Part 8-102: pr en,fr 27.070 10.99 IEC 62282-8-102:2019, IDT Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation BAS/TC 56 prBAS EN IEC 62282-8-201:2021 EN IEC 62282-8-201:2020, IDT; Fuel cell technologies - Part 8-201: pr en,fr 27.070 10.99 IEC 62282-8-201:2020, IDT Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems BAS/TC 56 prBAS EN IEC 62446-2:2021 EN IEC 62446-2:2020, IDT; IEC Photovoltaic (PV) systems - pr en,fr 27.160 10.99 62446-2:2020, IDT Requirements for testing, documentation and maintenance - Part 2: Grid connected systems - Maintenance of PV systems BAS/TC 56 prBAS EN IEC 62788-1-7:2021 EN IEC 62788-1-7:2020, IDT; Measurement procedures for materials pr en,fr 27.160 10.99 IEC 62788-1-7:2020, IDT used in photovoltaic modules - Part 1-7: Encapsulants - Test procedure of optical durability BAS/TC 56 prBAS EN IEC 62788-5-1:2021 EN IEC 62788-5-1:2020, IDT; Measurement procedures for materials pr en 27.160 10.99 IEC 62788-5-1:2020, IDT used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for use with edge seal materials
BAS/TC 56 prBAS EN IEC 62788-6-2:2021 EN IEC 62788-6-2:2020, IDT; Measurement procedures for materials pr en,fr 27.160 10.99 IEC 62788-6-2:2020, IDT used in photovoltaic modules - Part 6-2: General tests - Moisture permeation testing of polymeric materials BAS/TC 56 prBAS EN IEC 62938:2021 EN IEC 62938:2020, IDT; IEC Photovoltaic (PV) modules - Non- pr en,fr 27.160 10.99 62938:2020, IDT uniform snow load testing
268 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 56 prBAS EN IEC 62941:2021 EN IEC 62941:2020, IDT; IEC Terrestrial photovoltaic (PV) modules - pr en,fr 27.160 10.99 62941:2019, IDT Quality system for PV module manufacturing BAS/TC 56 prBAS EN IEC 63132-1:2021 EN IEC 63132-1:2020, IDT; IEC Guidance for installation procedures and pr en,fr 27.140 10.99 63132-1:2020, IDT tolerances of hydroelectric machines - Part 1: General aspects BAS/TC 56 prBAS EN IEC 63132-2:2021 EN IEC 63132-2:2020, IDT; IEC Guidance for installation procedures and pr en,fr 27.140 10.99 63132-2:2020, IDT tolerances of hydroelectric machines - Part 2: Vertical generators BAS/TC 56 prBAS EN IEC 63132-3:2021 EN IEC 63132-3:2020, IDT; IEC Guidance for installation procedures and pr en,fr 27.140 10.99 63132-3:2020, IDT tolerances of hydroelectric machines - Part 3: Vertical Francis turbines or pump- turbines BAS/TC 56 prBAS EN IEC 63132-4:2021 EN IEC 63132-4:2020, IDT; IEC Guidance for installation procedures and pr en,fr 27.140 10.99 63132-4:2020, IDT tolerances of hydroelectric machines - Part 4: Vertical Kaplan or propeller turbines BAS/TC 56 prBAS IEC 62548:2021 IEC 62548:2016, IDT Photovoltaic (PV) arrays - Design pr en,fr 27.160 10.99 requirements BAS/TC 56 prBAS IEC 62891:2021 IEC 62891:2020, IDT Maximum power point tracking efficiency pr en 27.160 10.99 of grid connected photovoltaic inverters
BAS/TC 56 prBAS IEC TS 62738:2021 IEC TS 62738:2018, IDT Ground-mounted photovoltaic power pr en 27.160 10.99 plants - Design guidelines and recommendations BAS/TC 57 nsBAS EN 60335-1:2020 EN 60335-1:2012/A13:2017, IDT; Household and similar electrical pv sr 97.030, 40.99 EN 60335-1:2012/A14:2019, IDT; appliances - Safety - Part 1: General 13.120 EN 60335-1:2012/A2:2019, IDT; requirements EN 60335-1:2012/A11:2014, IDT; EN 60335-1:2012/AC:2014, IDT; EN 60335-1:2012/A1:2019, IDT; EN 60335-1:2012, IDT; IEC 60335-1:2010, MOD
269 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 57 prBAS CLC/TS 50707:2021 CLC/TS 50707:2020, IDT Clothes washing machines and washer- pr en 97.060 10.99 dryers for household and similar use - Method for the determination of temperature inside the laundry load
BAS/TC 57 prBAS EN 50193-1/A1:2021 EN 50193-1:2016/A1:2020, IDT Electric instantaneous water heaters - pr en 91.140.65 10.99 Methods for measuring the Performance - Part 1: General requirements
BAS/TC 57 prBAS EN 50193-2-1/A1:2021 EN 50193-2-1:2016/A1:2020, IDT Electric instantaneous water heaters - pr en 91.140.65 10.99 Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters BAS/TC 57 prBAS EN 50193-2-2/A1:2021 EN 50193-2-2:2016/A1:2020, IDT Electric instantaneous water heaters - pr en 91.140.65 10.99 Part 2-2: Performance requirements - Single point of use electric instantaneous showers - Efficiency BAS/TC 57 prBAS EN 50440/A1:2021 EN 50440:2015/A1:2020, IDT Efficiency of domestic electrical storage pr en 91.140.65 10.99 water heaters and testing methods
BAS/TC 57 prBAS EN 50559/A1:2021 EN 50559:2013/A1:2020, IDT Electric room heating, underfloor pr en 97.100.10 10.99 heating, characteristic of performance - Definitions, method of testing, sizing and formula symbols BAS/TC 57 prBAS EN 50632-2-6/A1:2021 EN 50632-2-6:2015/A1:2019, IDT Electric motor-operated tools - Dust pr en 25.140.20 10.99 measurement procedure - Part 2-6: Particular requirements for hammers BAS/TC 57 prBAS EN 50636-2-107/A2:2021 EN 50636-2-107:2015/A2:2020, Safety of household and similar pr en 65.060.70 10.99 IDT appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers BAS/TC 57 prBAS EN 60335-2-105/A2:2021 EN 60335-2-105:2005/A2:2020, Household and similar electrical pr en,fr 97.170, 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-105: 13.120 105:2004/AMD2:2013, MOD Particular requirements for multifunctional shower cabinets
270 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 57 prBAS EN 60335-2-17/A1:2021 EN 60335-2-17:2013/A1:2020, Household and similar electrical pr en,fr 97.040.50, 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-17: 13.120 17:2012/AMD1:2015, MOD Particular requirements for blankets, pads, clothing and similar flexible heating appliances BAS/TC 57 prBAS EN 60335-2-24/A11:2021 EN 60335-2-24:2010/A11:2020, Household and similar electrical pr en 97.040.30 10.99 IDT appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers BAS/TC 57 prBAS EN 60335-2-26/A11:2021 EN 60335-2-26:2003/A11:2020, Household and similar electrical pr en 97.040.50, 10.99 IDT appliances - Safety - Part 2-26: 13.120 Particular requirements for clocks BAS/TC 57 prBAS EN 60335-2-27/A1:2021 EN 60335-2-27:2013/A1:2020, Household and similar electrical pr en,fr 97.170, 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-27: 13.120 27:2009/AMD1:2012, MOD Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation BAS/TC 57 prBAS EN 60335-2-27/A2:2021 EN 60335-2-27:2013/A2:2020, Household and similar electrical pr en 97.170, 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-27: 13.120 27:2009/AMD2:2015, MOD Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation BAS/TC 57 prBAS EN 60335-2-30/A1:2021 EN 60335-2-30:2009/A1:2020, Household and similar electrical pr en,fr 97.100.10, 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-30: 13.120 30:2009/AMD1:2016, MOD Particular requirements for room heaters BAS/TC 57 prBAS EN 60335-2-35/A1:2021 EN 60335-2-35:2016/A1:2019, Household and similar electrical pr en,fr 97.040.50, 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-35: 13.120 35:2012/AMD1:2016, IDT Particular requirements for instantaneous water heaters BAS/TC 57 prBAS EN 60335-2-4/A2:2021 EN 60335-2-4:2010/A2:2019, Household and similar electrical pr en 97.060, 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-4: Particular 13.120 4:2008/AMD2:2017, IDT requirements for spin extractors
271 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 57 prBAS EN 60335-2-47/A2:2021 EN 60335-2-47:2003/A2:2019, Household and similar electrical pr en,fr 97.040.20 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-47: 47:2002/AMD2:2017, IDT Particular requirements for commercial electric boiling pans BAS/TC 57 prBAS EN 60335-2-48/A2:2021 EN 60335-2-48:2003/A2:2019, Household and similar electrical pr en,fr 97.040.50 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-48: 48:2002/AMD2:2017, IDT Particular requirements for commercial electric grillers and toasters BAS/TC 57 prBAS EN 60335-2-49/A2:2021 EN 60335-2-49:2003/A2:2019, Household and similar electrical pr en,fr 97.030 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-49: 49:2002/AMD2:2017, IDT Particular requirements for commercial electric appliances for keeping food and crockery warm BAS/TC 57 prBAS EN 60335-2-5/A11:2021 EN 60335-2-5:2015/A11:2019, Household and similar electrical pr en 97.040.40, 10.99 IDT appliances - Safety - Part 2-5: Particular 13.120 BAS/TC 57 prBAS EN 60335-2-52/A12:2021 EN 60335-2-52:2003/A12:2019, Householdrequirements and for similar dishwashers electrical pr en 97.170, 10.99 IDT appliances - Safety - Part 2-52: 13.120 Particular requirements for oral hygiene appliances BAS/TC 57 prBAS EN 60335-2-6/A1:2021 EN 60335-2-6:2015/A1:2020, Household and similar electrical pr en 97.040.20, 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-6: Particular 13.120 6:2014/AMD1:2018, IDT requirements for stationary cooking ranges, hobs, ovens and similar appliances BAS/TC 57 prBAS EN 60335-2-6/A11:2021 EN 60335-2-6:2015/A11:2020, Household and similar electrical pr en 97.040.20, 10.99 IDT appliances - Safety - Part 2-6: Particular 13.120 requirements for stationary cooking ranges, hobs, ovens and similar appliances BAS/TC 57 prBAS EN 60335-2-61/A11:2021 EN 60335-2-61:2003/A11:2019, Household and similar electrical pr en 97.100.10, 10.99 IDT appliances - Safety - Part 2-61: 13.120 Particular requirements for thermal- storage room heaters BAS/TC 57 prBAS EN 60335-2-7/A2:2021 EN 60335-2-7:2010/A2:2019, Household and similar electrical pr en,fr 97.060, 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-7: Particular 13.120 7:2008/AMD2:2016, MOD requirements for washing machines
272 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 57 prBAS EN 60335-2-78/A11:2021 EN 60335-2-78:2003/A11:2020, Household and similar electrical pr en 91.180, 10.99 IDT appliances - Safety - Part 2-78: 13.120 Particular requirements for outdoor barbecues BAS/TC 57 prBAS EN 60335-2-82/A2:2021 EN 60335-2-82:2003/A2:2020, Household and similar electrical pr en,fr 97.180, 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-82: 97.200.40 82:2002/AMD2:2015, IDT Particular requirements for amusement machines and personal service machines BAS/TC 57 prBAS EN 60335-2-85/A2:2021 EN 60335-2-85:2003/A2:2020, Household and similar electrical pr en,fr 97.060 10.99 IDT; IEC 60335-2- appliances - Safety - Part 2-85: 85:2002/AMD2:2017, IDT Particular requirements for fabric steamers BAS/TC 57 prBAS EN 60436/Cor 1:2021 EN 60436:2020/AC:2020-06, IDT Electric dishwashers for household use - pr en 97.040.40 10.99 Methods for measuring the performance
BAS/TC 57 prBAS EN 60436:2021 EN 60436:2020, IDT; IEC Electric dishwashers for household use - pr en,fr 97.040.40 10.99 60436:2015, MOD Methods for measuring the performance
BAS/TC 57 prBAS EN 60704-2-4/A11:2021 EN 60704-2-4:2012/A11:2020, Household and similar electrical pr en 97.060, 10.99 IDT appliances - Test code for the 17.140.20 determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors BAS/TC 57 prBAS EN 62552-1:2021 EN 62552-1:2020, IDT; IEC Household refrigerating appliances - pr en,fr 97.030 10.99 62552-1:2015, MOD Characteristics and test methods - Part 1: General requirements BAS/TC 57 prBAS EN 62552-2:2021 EN 62552-2:2020, IDT; IEC Household refrigerating appliances - pr en,fr 97.030 10.99 62552-2:2015, MOD Characteristics and test methods - Part 2: Performance requirements BAS/TC 57 prBAS EN 62552-3:2021 EN 62552-3:2020, IDT; IEC Household refrigerating appliances - pr en,fr 97.030 10.99 62552-3:2015, MOD Characteristics and test methods - Part 3: Energy consumption and volume
273 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 57 prBAS EN 62841-2-11/A1:2021 EN 62841-2-11:2016/A1:2020, Electric motor-operated hand-held tools, pr en 25.140.30, 10.99 IDT; IEC 62841-2- transportable tools and lawn and garden 25.140.20 11:2015/AMD1:2018, IDT machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws BAS/TC 57 prBAS EN 62841-3-4/A1:2021 EN 62841-3-4:2016/A1:2020, Electric motor-operated hand-held tools, pr en,fr 25.140.20 10.99 IDT; IEC 62841-3- transportable tools and lawn and garden 4:2016/AMD1:2019, IDT machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders BAS/TC 57 prBAS EN 62841-3-4/A12:2021 EN 62841-3-4:2016/A12:2020, Electric motor-operated hand-held tools, pr en 25.140.20 10.99 IDT transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders BAS/TC 57 prBAS EN 62841-4-1:2021 EN 62841-4-1:2020, IDT; IEC Electric Motor-Operated Hand-Held pr en,fr 25.140.20 10.99 62841-4-1:2017, IDT Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4- 1: Particular requirements for chain saws BAS/TC 57 prBAS EN IEC 60311:2021 EN IEC 60311:2019, IDT; IEC Electric irons for household or similar pr en,fr 97.060 10.99 60311:2016, IDT use - Methods for measuring performance BAS/TC 57 prBAS EN IEC 60335-2-111:2021 EN IEC 60335-2-111:2019, IDT; Household and similar electrical pr en,fr 97.140, 10.99 IEC 60335-2-111:2015, IDT appliances - Safety - Part 2-111: 97.100.10, Particular requirements for electric ondol 97.030, mattress with a non-flexible heated part 13.120
BAS/TC 57 prBAS EN IEC 60335-2-71:2021 EN IEC 60335-2-71:2020, IDT; Household and similar electrical pr en,fr 97.100.10, 10.99 IEC 60335-2-71:2018, IDT appliances - Safety - Part 2-71: 65.020.30 Particular requirements for electrical heating appliances for breeding and rearing animals BAS/TC 57 prBAS EN IEC 60335-2-87:2021 EN IEC 60335-2-87:2020, IDT; Household and similar electrical pr en,fr 65.060.99 10.99 IEC 60335-2-87:2016, IDT appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment
274 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 57 prBAS EN IEC 60704-2- EN IEC 60704-2- Household and similar electrical pr en 17.140.20 10.99 16/A11:2021 16:2019/A11:2020, IDT appliances - Test code for the determination of airborne acoustical noise - Part 2-16: Particular requirements for washer-dryers BAS/TC 57 prBAS EN IEC 60704-2-7:2021 EN IEC 60704-2-7:2020, IDT; Household and similar electrical pr en,fr 23.120, 10.99 IEC 60704-2-7:2020, IDT appliances - Test code for the 17.140.20 determination of airborne acoustical noise - Part 2-7: Particular requirements for fans BAS/TC 57 prBAS EN IEC 60704-2-8:2021 EN IEC 60704-2-8:2020, IDT; Household and similar electrical pr en,fr 97.170, 10.99 IEC 60704-2-8:2020, IDT appliances - Test code for the 17.140.20 determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers BAS/TC 57 prBAS EN IEC 61591/A11:2021 EN IEC 61591:2020/A11:2020, Cooking fume extractors - Methods for pr en 97.040.20 10.99 IDT measuring performance BAS/TC 57 prBAS EN IEC 61591:2021 EN IEC 61591:2020, IDT; IEC Cooking fume extractors - Methods for pr en,fr 97.040.20 10.99 61591:2019, IDT measuring performance BAS/TC 57 prBAS EN IEC 62115/A11:2021 EN IEC 62115:2020/A11:2020, Electric toys - Safety pr en 97.200.50, 10.99 IDT 13.120 BAS/TC 57 prBAS EN IEC 62115:2021 EN IEC 62115:2020, IDT; IEC Electric toys - Safety pr en,fr 97.200.50, 10.99 62115:2017/COR1:2019, IDT; 13.120 IEC 62115:2017, IDT BAS/TC 57 prBAS EN IEC 62841-3- EN IEC 62841-3- Electric motor-operated hand-held tools, pr en 25.140.20 10.99 9/A11:2021 9:2020/A11:2020, IDT transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws BAS/TC 57 prBAS EN IEC 62841-3-9:2021 EN IEC 62841-3-9:2020, IDT; Electric motor-operated hand-held tools, pr en,fr 25.140.20 10.99 IEC 62841-3-9:2020, IDT transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
275 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 57 prBAS EN IEC 62885-4:2021 EN IEC 62885-4:2020, IDT; IEC Surface cleaning appliances - Part 4: pr en,fr 97.080 10.99 62885-4:2020, IDT Cordless dry vacuum cleaners for household or similar use - Methods for measuring the performance BAS/TC 57 prBAS EN IEC 62885-8:2021 EN IEC 62885-8:2019, IDT; IEC Surface cleaning appliances - Part 8: pr en,fr 97.080 10.99 62885-8:2019, IDT Dry vacuum cleaners for commercial use - Methods for measuring the performance BAS/TC 57 prBAS EN IEC 62885-9:2021 EN IEC 62885-9:2019, IDT; IEC Surface cleaning appliances - Part 9: pr en,fr 97.080 10.99 62885-9:2019, IDT Floor treatment machines with or without traction drive, for commercial use - Methods for measuring the performance
BAS/TC 57 prBAS EN IEC 63008:2021 EN IEC 63008:2020, IDT; IEC Household and similar electrical pr en,fr 97.030 10.99 63008:2020, IDT appliances - Accessibility of control elements, doors, lids, drawers and handles BAS/TC 57 prBAS EN IEC 63086-1:2021 EN IEC 63086-1:2020, IDT; IEC Household and similar electrical air pr en,fr 23.120 10.99 63086-1:2020, IDT cleaning appliances - Methods for measuring the performance - Part 1: General requirements BAS/TC 57 prBAS EN IEC 63136:2021 EN IEC 63136:2019, IDT; IEC Electric dishwashers for commercial use pr en,fr 97.040.40 10.99 63136:2019, IDT - Test methods for measuring the performance BAS/TC 57 prBAS EN IEC 63169:2021 EN IEC 63169:2020, IDT; IEC Electrical household and similar cooling pr en,fr 97.040.30, 10.99 63169:2020, IDT and freezing appliances - Food 67.040 preservation BAS/TC 57 prBAS EN IEC 63252:2021 EN IEC 63252:2020, IDT; IEC Energy consumption of vending pr en,fr 27.015, 10.99 63252:2020, IDT machines 97.130.20 BAS/TC 57 prBAS IEC 60335-2-118:2021 IEC 60335-2-118:2020, IDT Household and similar electrical pr en,fr 97.040.99, 10.99 appliances - Safety - Part 2-118: 13.120 Particular requirements for professional ice-cream makers BAS/TC 59 prBAS EN 17173:2021 EN 17173:2020, IDT European CBRNE glossary pr en 13.300, 10.99 13.310, 01.040.13
276 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 59 prBAS CEN/TS 17159:2021 CEN/TS 17159:2018, IDT Societal and citizen security - Guidance pr en 11.020.99, 10.99 for the security of hazardous materials 13.300, (CBRNE) in healthcare facilities 13.310
BAS/TC 59 prBAS CEN/TS 17091:2021 CEN/TS 17091:2018, IDT Crisis management - Guidance for pr en 03.100.01 10.99 developing a strategic capability BAS/TC 59 prBAS EN ISO 22300:2021 EN ISO 22300:2018, IDT; ISO Security and resilience - Vocabulary pr en 03.100.01, 10.99 22300:2018, IDT 01.040.03 BAS/TC 59 prBAS EN ISO 22301:2021 EN ISO 22301:2019, IDT; ISO Security and resilience - Business pv sr,en 03.100.70, 10.99 22301:2019, IDT continuity management systems - 03.100.01 Requirements BAS/TC 59 prBAS EN ISO 22313:2021 EN ISO 22313:2020, IDT; ISO Security and resilience - Business pr en 03.100.70, 10.99 22313:2020, IDT continuity management systems - 03.100.01 Guidance on the use of ISO 22301 BAS/TC 59 prBAS ISO 22316:2021 ISO 22316:2017, IDT Security and resilience - Organizational ko en 03.100.01 10.99 resilience - Principles and attributes
BAS/TC 59 prBAS ISO 22327:2021 ISO 22327:2018, IDT Security and resilience - Emergency ko en 03.100.01 10.99 management - Guidelines for implementation of a community-based landslide early warning system BAS/TC 59 prBAS ISO 22328-1:2021 ISO 22328-1:2020, IDT Security and resilience - Emergency ko en 03.100.01 10.99 management - Part 1: General guidelines for the implementation of a community-based disaster early warning system BAS/TC 59 prBAS ISO/TS 22330:2021 ISO/TS 22330:2018, IDT Security and resilience - Business ko en 03.100.70, 10.99 continuity management systems - 03.100.01 Guidelines for people aspects of business continuity BAS/TC 59 prBAS ISO/TS 22331:2021 ISO/TS 22331:2018, IDT Security and resilience - Business ko en 03.100.70, 10.99 continuity management systems - 03.100.01 Guidelines for business continuity strategy BAS/TC 59 prBAS ISO/TR 22370:2021 ISO/TR 22370:2020, IDT Security and resilience - Urban ko en 13.020.20, 10.99 resilience - Framework and principles 03.100.01
277 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 59 prBAS ISO 22383:2021 ISO 22383:2020, IDT Security and resilience - Authenticity, ko en 03.100.01 10.99 integrity and trust for products and documents - Guidelines for the selection and performance evaluation of authentication solutions for material goods BAS/TC 59 prBAS ISO 22384:2021 ISO 22384:2020, IDT Security and resilience - Authenticity, ko en 03.100.01 10.99 integrity and trust for products and documents - Guidelines to establish and monitor a protection plan and its implementation BAS/TC 59 prBAS ISO 22392:2021 ISO 22392:2020, IDT Security and resilience - Community ko en 03.100.01 10.99 resilience - Guidelines for conducting peer reviews BAS/TC 59 prBAS ISO 22395:2021 ISO 22395:2018, IDT Security and resilience - Community ko en 03.100.01 10.99 resilience - Guidelines for supporting vulnerable persons in an emergency BAS/TC 59 prBAS ISO 22396:2021 ISO 22396:2020, IDT Security and resilience - Community ko en 03.100.01 10.99 resilience - Guidelines for information exchange between organizations BAS/TC 59 prBAS ISO 22319:2021 ISO 22319:2017, IDT Security and resilience - Community ko en 03.100.01 10.99 resilience - Guidelines for planning the involvement of spontaneous volunteers BAS/TC 59 prBAS ISO 22326:2021 ISO 22326:2018, IDT Security and resilience - Emergency ko en 03.100.01 10.99 management - Guidelines for monitoring facilities with identified hazards
BAS/TC 59 prBAS ISO 22320:2021 ISO 22320:2018, IDT Security and resilience - Emergency ko en 03.100.01 10.99 management - Guidelines for incident management BAS/TC 59 prBAS ISO/TS 22375:2021 ISO/TS 22375:2018, IDT Security and resilience - Guidelines for ko en 03.100.01 10.99 complexity assessment process BAS/TC 59 prBAS ISO 22380:2021 ISO 22380:2018, IDT Security and resilience - Authenticity, ko en 03.100.01 10.99 integrity and trust for products and documents - General principles for product fraud risk and countermeasures
278 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 59 prBAS ISO 22381:2021 ISO 22381:2018, IDT Security and resilience - Authenticity, ko en 03.100.01 10.99 integrity and trust for products and documents - Guidelines for establishing interoperability among object identification systems to deter counterfeiting and illicit trade BAS/TC 59 prBAS ISO 22382:2021 ISO 22382:2018, IDT Security and resilience - Authenticity, ko en 03.100.01 10.99 integrity and trust for products and documents - Guidelines for the content, security, issuance and examination of excise tax stamps BAS/TC 60 prBAS EN 12519:2019 EN 12519:2018, IDT Windows and pedestrian doors - pv bs,en 01.040.19, 10.99 Terminology 91.060.50, 01.040.91 BAS/TC 60 prBAS EN 12211:2019 EN 12211:2016, IDT Windows and doors - Resistance to pv bs,en 91.060.50 10.99 wind load - Test method BAS/TC 60 psBAS EN 14351-2:2020 EN 14351-2:2018, IDT Windows and doors - Product standard, pv sr,en 91.060.50 50.99 performance characteristics - Part 2: Internal pedestrian doorsets
BAS/TC 60 psBAS EN 1627:2020 EN 1627:2011, IDT Pedestrian doorsets, windows, curtain pv bs,en 91.190 50.99 walling, grilles and shutters - Burglar resistance - Requirements and classification BAS/TC 60 psBAS EN 13659:2020 EN 13659:2015, IDT Shutters and external venetian blinds - pv sr,en 91.190 50.99 Performance requirements including safety BAS/TC 60 prBAS EN 17213:2021 EN 17213:2020, IDT Windows and doors - Environmental pr en 91.190 10.99 Product Declarations - Product category rules for windows and pedestrian doorsets BAS/TC 60 prBAS EN 12046-1:2021 EN 12046-1:2020, IDT Operating forces - Test method - Part 1: pr en 91.190 10.99 Windows BAS/TC 60 prBAS EN 13115:2021 EN 13115:2020, IDT Windows - Classification of mechanical pr en 91.190 10.99 properties - Racking, torsion and operating forces
279 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 60 prBAS EN 16867:2021 EN 16867:2020, IDT Building hardware - Mechatronic door pr en 91.190 10.99 furniture - Requirements and test methods BAS/TC 60 prBAS EN 13830+A1:2021 EN 13830:2015+A1:2020, IDT Curtain walling - Product standard pr en 91.060.10 10.99 BAS/TC 61 prBAS EN 1992-1-2/A1:2021 EN 1992-1-2:2004/A1:2019, IDT Eurocode 2: Design of concrete pv hr 91.010.30, 10.99 structures - Part 1-2: General rules - 91.080.40, Structural fire design 13.220.50 BAS/TC 61 prBAS EN 1992-4:2021 EN 1992-4:2018, IDT Eurocode 2 - Design of concrete pv hr 91.010.30, 10.99 structures - Part 4: Design of fastenings 91.080.40 for use in concrete BAS/TC 62 prBAS EN 1993-4-2/A1:2019 EN 1993-4-2:2007/A1:2017, IDT Eurocode 3 - Design of steel structures - pv sr 91.080.13, 10.99 Part 4-2: Tanks 91.010.30, 23.020.10, 23.020.01 BAS/TC 62 prBAS EN 1993-4-1/A1:2021 EN 1993-4-1:2007/A1:2017, IDT Eurocode 3 - Design of steel structures - pv sr 91.080.13, 10.99 Part 4-1: Silos 91.080.10, 91.010.30, 65.040.20 BAS/TC 62 prBAS EN 1993-1-6/A1:2021 EN 1993-1-6:2007/A1:2017, IDT Eurocode 3 - Design of steel structures - pv sr 91.080.13, 10.99 Part 1-6: Strength and Stability of Shell 91.080.10, Structures 91.010.30 BAS/TC 62 prBAS EN 1993-1-4/A2:2021 EN 1993-1-4:2006/A2:2020, IDT Eurocode 3 - Design of steel structures - pv bs 91.080.13, 10.99 Part 1-4: General rules - Supplementary 91.010.30 rules for stainless steels
BAS/TC 63 prBAS EN 17187:2021 EN 17187:2020, IDT Conservation of Cultural Heritage - pr en 97.195 10.99 Characterization of mortars used in cultural heritage BAS/TC 63 prBAS EN 15898:2021 EN 15898:2019, IDT Conservation of cultural heritage - Main pr en 97.195, 10.99 general terms and definitions 01.040.97 BAS/TC 63 prBAS EN 17429:2021 EN 17429:2020, IDT Conservation of cultural heritage - pr en 97.195 10.99 Procurement of conservation services and works BAS/TC 63 prBAS CEN/TS 17385:2021 CEN/TS 17385:2019, IDT Method for condition assessment of pr en 03.100.01 10.99 immobile constructed assets BAS/TC 63 prBAS EN 1502:2021 EN 1502:2020, IDT Inland navigation vessels - Boarding pr en 47.060, 10.99 stairs 47.020.10
280 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 17360:2021 EN 17360:2020, IDT Inland navigation vessels - Stanchions pr en 47.060, 10.99 and holders for tiltable and detachable 47.020.10 railings BAS/TC 63 prBAS EN 17361:2021 EN 17361:2020, IDT Inland navigation vessels - Outboard pr en 47.060, 10.99 ladders 47.020.10 BAS/TC 63 prBAS EN ISO 25197:2021 EN ISO 25197:2020, IDT; ISO Small craft - Electrical/electronic control pr en 47.080 10.99 25197:2020, IDT systems for steering, shift and throttle
BAS/TC 63 prBAS EN ISO 15083:2021 EN ISO 15083:2020, IDT; ISO Small craft - Bilge-pumping systems pr en 47.080 10.99 15083:2020, IDT BAS/TC 63 prBAS EN ISO 11105:2021 EN ISO 11105:2020, IDT; ISO Small craft - Ventilation of petrol engine pr en 47.080 10.99 11105:2020, IDT and/or petrol tank compartments
BAS/TC 63 prBAS EN ISO 10240:2021 EN ISO 10240:2020, IDT; ISO Small craft - Owner's manual pr en 47.080 10.99 10240:2019, IDT BAS/TC 63 prBAS CEN/TR 17511:2021 CEN/TR 17511:2020, IDT Materials obtained from End-of-Life pr en 13.160 10.99 Tyres - Odour of ELT granulates - Origin and remediation possibilities BAS/TC 63 prBAS CEN/TR 17509:2021 CEN/TR 17509:2020, IDT Materials obtained from End-of-Life pr en 13.160 10.99 Tyres - Granulated rubber - Determination of textile fiber content by visual index (qualitative method) BAS/TC 63 prBAS EN 16214-1+A1:2021 EN 16214-1:2012+A1:2019, IDT Sustainability criteria for the production pr en 75.160.40, 10.99 of biofuels and bioliquids for energy 27.190, applications - Principles, criteria, 01.040.75, indicators and verifiers - Part 1: 01.040.27 Terminology BAS/TC 63 prBAS EN 16214-4+A1:2021 EN 16214-4:2013+A1:2019, IDT Sustainability criteria for the production pr en 75.160.40, 10.99 of biofuels and bioliquids for energy 27.190 applications - Principles, criteria, indicators and verifiers - Part 4: Calculation methods of the greenhouse gas emission balance using a life cycle analysis approach BAS/TC 63 prBAS EN ISO 21043-2:2021 EN ISO 21043-2:2020, IDT; ISO Forensic sciences - Part 2: Recognition, pr en 07.140 10.99 21043-2:2018, IDT recording, collecting, transport and storage of items
281 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN ISO 11665-2:2021 EN ISO 11665-2:2019, IDT; ISO Measurement of radioactivity in the pr en 17.240, 10.99 11665-2:2019, IDT environment - Air: radon-222 - Part 2: 13.040.01 Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products BAS/TC 63 prBAS EN ISO 11665-3:2021 EN ISO 11665-3:2020, IDT; ISO Measurement of radioactivity in the pr en 17.240 10.99 11665-3:2020, IDT environment - Air: radon-222 - Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products BAS/TC 63 prBAS EN ISO 11665-5:2021 EN ISO 11665-5:2020, IDT; ISO Measurement of radioactivity in the pr en 17.240 10.99 11665-5:2020, IDT environment - Air: radon-222 - Part 5: Continuous measurement methods of the activity concentration BAS/TC 63 prBAS EN ISO 11665-6:2021 EN ISO 11665-6:2020, IDT; ISO Measurement of radioactivity in the pr en 17.240, 10.99 11665-6:2020, IDT environment - Air: radon-222 - Part 6: 13.040.01 Spot measurement methods of the activity concentration BAS/TC 63 prBAS EN ISO 20785-1:2021 EN ISO 20785-1:2020, IDT; ISO Dosimetry for exposures to cosmic pr en 49.020, 10.99 20785-1:2020, IDT radiation in civilian aircraft - Part 1: 13.280 Conceptual basis for measurements BAS/TC 63 prBAS EN ISO 20785-2:2021 EN ISO 20785-2:2020, IDT; ISO Dosimetry for exposures to cosmic pr en 49.020, 10.99 20785-2:2020, IDT radiation in civilian aircraft - Part 2: 13.280 Characterization of instrument response
BAS/TC 63 prBAS EN ISO 19361:2021 EN ISO 19361:2020, IDT; ISO Measurement of radioactivity - pr en 17.240 10.99 19361:2017, IDT Determination of beta emitters activities - Test method using liquid scintillation counting BAS/TC 63 prBAS EN ISO 18557:2021 EN ISO 18557:2020, IDT; ISO Characterisation principles for soils, pr en 27.120.30, 10.99 18557:2017, IDT buildings and infrastructures 13.020.40 contaminated by radionuclides for remediation purposes BAS/TC 63 prBAS EN ISO 19581:2021 EN ISO 19581:2020, IDT; ISO Measurement of radioactivity - Gamma pr en 17.240 10.99 19581:2017, IDT emitting radionuclides - Rapid screening method using scintillation detector gamma-ray spectrometry
282 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN ISO 19226:2021 EN ISO 19226:2020, IDT; ISO Nuclear energy - Determination of pr en 27.120.10 10.99 19226:2017, IDT neutron fluence and displacement per atom (dpa) in reactor vessel and internals BAS/TC 63 prBAS EN 17206:2021 EN 17206:2020, IDT Entertainment technology - Machinery pr en 97.200.10 10.99 for stages and other production areas - Safety requirements and inspections BAS/TC 63 prBAS EN 17375:2021 EN 17375:2020, IDT Electronic cigarettes and e-liquids - pr en 65.160 10.99 Reference e-liquids BAS/TC 63 prBAS EN 2880+Cor1:2021 EN 2880:2018+AC:2019, IDT Aerospace series - Nuts, anchor, self- pr en 49.030.30 10.99 locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated - Classification: 900 MPa (at ambient temperature) / 120 °C BAS/TC 63 prBAS EN 4571:2021 EN 4571:2020, IDT Aerospace series - Heat resisting alloy pr en 49.025.05 10.99 X12CrNiCoMoW21-20 - Solution treated - Bars and sections - De ≤ 100 mm
BAS/TC 63 prBAS EN 4572:2021 EN 4572:2020, IDT Aerospace series - Heat resisting alloy pr en 49.025.05 10.99 X12CrNiCoMoW21-20 - Solution treated - Sheets and strips - a ≤ 3 mm BAS/TC 63 prBAS EN 4573:2021 EN 4573:2020, IDT Aerospace series - Heat resisting alloy pr en 49.025.05 10.99 X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm BAS/TC 63 prBAS EN 4574:2021 EN 4574:2020, IDT Aerospace series - Heat resisting alloy pr en 49.025.05 10.99 X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Forgings - De ≤ 100 mm BAS/TC 63 prBAS EN 4575:2021 EN 4575:2020, IDT Aerospace series - Heat resisting alloy pr en 49.025.05 10.99 X12CrNiCoMoW21-20 - Solution treated and descaled - Sheets and plates - 3 mm < a ≤ 50 mm BAS/TC 63 prBAS EN 4264:2021 EN 4264:2020, IDT Aerospace series - Heat resisting alloy pr en 49.025.05 10.99 X4NiCrMoTi43-13 - As forged - Forging stock - a or D ≤ 200 mm
283 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4244:2021 EN 4244:2020, IDT Aerospace series - Heat resisting alloy pr en 49.025.99 10.99 FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D ≤ 200 mm - 1 000 MPa ≤ Rm ≤ 1 140 MPa BAS/TC 63 prBAS EN 4245:2021 EN 4245:2020, IDT Aerospace series - Heat resisting alloy pr en 49.025.99 10.99 FE-PM1708 - Vacuum arc remelted - As forged - Forging stock - De ≤ 300 mm
BAS/TC 63 prBAS EN 4570:2021 EN 4570:2020, IDT Aerospace series - Heat resisting alloy pr en 49.025.05 10.99 X12CrNiCoMoW21-20 - Solution treated - Forgings - De ≤ 100 mm BAS/TC 63 prBAS EN 4426:2021 EN 4426:2020, IDT Aerospace series - Non-metallic pr en 49.025.60 10.99 materials - Textiles - Test method - Determination of conductivity and pH of aqueous extracts BAS/TC 63 prBAS EN 2960:2021 EN 2960:2020, IDT Aerospace series - Heat resisting nickel pr en 49.025.99, 10.99 base alloy (NI-P101HT) - Cold worked 49.025.15 and solution treated - Bars for machining for fasteners - 3 mm ≤ D ≤ 50 mm BAS/TC 63 prBAS EN 4604-006/Cor1:2021 EN 4604-006:2019/AC:2020, IDT Aerospace series - Cable, electrical, for pr en 49.060 10.99 signal transmission - Part 006: Cable, coaxial, 50 ohms, 200 °C, type WM - Product standard BAS/TC 63 prBAS EN 4604-007/Cor1:2021 EN 4604-007:2019/AC:2020, IDT Aerospace series - Cable, electrical, for pr en 49.060 10.99 signal transmission - Part 007: Cable, coaxial, 50 ohms, 200 °C, type WN - Product standard BAS/TC 63 prBAS EN 2997-011:2021 EN 2997-011:2019, IDT Aerospace series - Connectors, pr en 49.060 10.99 electrical, circular, coupled by threaded ring, fire resistant or non fire resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 011: Dummy receptacle - Product standard
284 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4708-001:2021 EN 4708-001:2019, IDT Aerospace series - Sleeving, heat- pr en 49.060 10.99 shrinkable, for binding, insulation and identification - Part 001: Technical specification BAS/TC 63 prBAS EN 4641-106:2021 EN 4641-106:2018, IDT Aerospace series - Cables, optical, 125 pr en 49.090 10.99 µm diameter cladding - Part 106: Semi- loose structure 62,5/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard BAS/TC 63 prBAS EN 4641-201:2021 EN 4641-201:2018, IDT Aerospace series - Cables, optical, 125 pr en 49.090 10.99 µm diameter cladding - Part 201: Semi- loose structure 9/125 µm SM fibre nominal 1,8 mm outside diameter - Product standard BAS/TC 63 prBAS EN 4708-102:2021 EN 4708-102:2018, IDT Aerospace series - Sleeving, heat- pr en 49.060 10.99 shrinkable, for binding, insulation and identification - Part 102: Very flexible polymer - Operating temperature - 75 °C to 150 °C - Product standard BAS/TC 63 prBAS EN 4641-202:2021 EN 4641-202:2018, IDT Aerospace series - Cables, optical, 125 pr en 49.090 10.99 µm diameter cladding - Part 202: Semi- loose, ruggedized simplex construction 9/125 µm SM fibre nominal 2,74 mm outside diameter - Product standard
BAS/TC 63 prBAS EN 2667-3:2021 EN 2667-3:2019, IDT Aerospace series - Non-metallic pr en 49.025.50 10.99 materials - Foaming structural adhesive films - Test methods - Part 3: Expansion ratio and volatile content BAS/TC 63 prBAS EN 3018:2021 EN 3018:2019, IDT Aerospace series - Heat resisting alloy pr en 49.025.15 10.99 NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm BAS/TC 63 prBAS EN 2600:2021 EN 2600:2018, IDT Aerospace series - Designation of pr en 49.025.15, 10.99 metallic semi-finished products - Rules 49.025.05
285 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 2868:2021 EN 2868:2019, IDT Aerospace series - Nuts, hexagonal, pr en 49.060, 10.99 slotted/castellated, normal height, 49.030.30 normal across flats, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature)/650 °C BAS/TC 63 prBAS EN 2923:2021 EN 2923:2019, IDT Aerospace series - Nuts, hexagon, pr en 49.030.30 10.99 plain, reduced height, reduced across flats, in heat resisting steel, silver plated - Classification: 600 MPa (at ambient temperature) / 425 °C BAS/TC 63 prBAS EN 2924:2021 EN 2924:2019, IDT Aerospace series - Nuts, hexagon, pr en 49.030.30 10.99 plain, reduced height, reduced across flats, in heat resisting steel, silver plated, left hand thread - Classification: 600 MPa (at ambient temperature) / 425 °C
BAS/TC 63 prBAS EN 2414:2021 EN 2414:2019, IDT Aerospace series - Washers, pr en 49.030.50 10.99 chamfered, with counterbore, in alloy steel, cadmium plated BAS/TC 63 prBAS EN 6059-305:2021 EN 6059-305:2019, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeves - Test methods - Part 305: Fluid absorption BAS/TC 63 prBAS EN 6059-407:2021 EN 6059-407:2019, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeves - Test methods - Part 407: Mark adherence and print permanence BAS/TC 63 prBAS EN 4609:2021 EN 4609:2019, IDT Aerospace series - Spiral drive recesses pr en 49.030.20 10.99 for threaded fasteners - Geometrical definition and technical requirements
BAS/TC 63 prBAS EN 2341:2021 EN 2341:2018, IDT Aerospace series - Aluminium and pr en 49.025.20 10.99 aluminium alloy - Square and rectangular extruded bars - Dimensions
286 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 2715:2021 EN 2715:2018, IDT Aerospace series - Macrographic pr en 49.025.20 10.99 examination of aluminium and aluminium alloy wrought products, forging stock and forgings BAS/TC 63 prBAS EN 2451:2021 EN 2451:2019, IDT Aerospace series - Steel 31Ni10 - 1 230 pr en 49.025.10 10.99 MPa ≤ Rm ≤ 1 420 MPa - Forgings - De ≤ 40 mm BAS/TC 63 prBAS EN 2476:2021 EN 2476:2019, IDT Aerospace series - Steel 30CrNiMo8 pr en 49.025.10 10.99 (1.6580) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm BAS/TC 63 prBAS EN 2502:2021 EN 2502:2019, IDT Aerospace series - Steel pr en 49.025.10 10.99 X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Bars - De ≤ 150 mm BAS/TC 63 prBAS EN 2503:2021 EN 2503:2019, IDT Aerospace series - Steel pr en 49.025.10 10.99 X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Forgings - De ≤ 150 mm BAS/TC 63 prBAS EN 9131:2021 EN 9131:2020, IDT Aerospace series - Quality Management pr en 03.100.70, 10.99 Systems - Nonconformance Data 49.020, Definition and Documentation 03.120.10
BAS/TC 63 prBAS EN 3086:2021 EN 3086:2019, IDT Aerospace series - Hose assemblies - pr en 49.080 10.99 Designation limited to 15 digits BAS/TC 63 prBAS EN 3660-033:2021 EN 3660-033:2019, IDT Aerospace series - Cable outlet pr en 49.060 10.99 accessories for circular and rectangular electrical and optical connectors - Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets - Product standard BAS/TC 63 prBAS EN 4840-102:2021 EN 4840-102:2019, IDT Aerospace series - Heat shrinkable pr en 49.060 10.99 moulded shapes - Part 102: Elastomeric, semi-rigid, temperature range -75 to 150 °C - Product Standard
287 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4705:2021 EN 4705:2020, IDT Aerospace series - Measurement pr en 49.095 10.99 methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment
BAS/TC 63 prBAS EN 6049-004:2021 EN 6049-004:2019, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeve in meta- aramid fibres - Part 004: Braided, tubular, high expandable - Product standard BAS/TC 63 prBAS EN 4726+Cor1:2021 EN 4726:2018+AC:2019, IDT Aerospace series - Acceptance pr en 49.095 10.99 parameters of aesthetical variations for all visible equipment installed in aircraft cabins under all contractual variations
BAS/TC 63 prBAS EN 2878+Cor1:2021 EN 2878:2018+AC:2019, IDT Aerospace series - Nuts, anchor, self- pr en 49.030.30 10.99 locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C BAS/TC 63 prBAS EN 4708-301:2021 EN 4708-301:2018, IDT Aerospace series - Sleeving, heat- pr en 49.060 10.99 shrinkable, for binding, insulation and identification - Part 301: Adhesive lined polyolefin sleevings - Operating temperature - 55 °C to 105 °C - Product Standard BAS/TC 63 prBAS EN 6059-309:2021 EN 6059-309:2018, IDT Aerospace series - Electrical cables, pr en 49.060, 10.99 installation - Protection sleeves - Test 13.220.40 methods - Part 309: Fire resistance when fitted on a cable bundle BAS/TC 63 prBAS EN 9145:2021 EN 9145:2018, IDT Aerospace series - Requirements for pr en 49.020, 10.99 Advanced Product Quality Planning and 03.120.10 Production Part Approval Process BAS/TC 63 prBAS EN 4867:2021 EN 4867:2019, IDT Aerospace series - Laser surface pr en 49.025.01 10.99 marking by discoloration
288 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4868:2021 EN 4868:2019, IDT Aerospace series - Anodic pr en 49.040 10.99 electrodeposition of hexavalent chromium free primer BAS/TC 63 prBAS EN 7010:2021 EN 7010:2020, IDT Aerospace series - Configuration - pr en 49.030.20 10.99 Definition and designation for product standards for externally threaded fasteners BAS/TC 63 prBAS EN 4827:2021 EN 4827:2019, IDT Aerospace series - Hexavalent pr en 49.040, 10.99 chromium free anodizing of aluminium 49.025.20 and aluminium alloys BAS/TC 63 prBAS EN 4838-004:2021 EN 4838-004:2018, IDT Aerospace series - Arc fault circuit pr en 49.060 10.99 breakers, single-pole, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 004: With signal contact - Product standard BAS/TC 63 prBAS EN 4838-005:2021 EN 4838-005:2019, IDT Aerospace series - Arc fault circuit pr en 49.060 10.99 breakers, single-pole, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz Constant Frequency - Part 005: With polarized signal contact - Product standard BAS/TC 63 prBAS EN 3299:2021 EN 3299:2019, IDT Aerospace series - Shaft-nuts and pr en 49.030.50, 10.99 threaded rings, self-locking, right- or left- 49.030.30 hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification BAS/TC 63 prBAS EN 3818:2021 EN 3818:2019, IDT Aerospace series - Bolts, MJ threads, in pr en 49.030.20 10.99 titanium alloy TI-P64001 - Strength class: 1 100 MPa (at ambient temperature) - Technical specification BAS/TC 63 prBAS EN 4056-003:2021 EN 4056-003:2019, IDT Aerospace series - Cable ties for pr en 49.060 10.99 harnesses - Part 003: Plastic cable ties - Operating temperatures - 65 °C to 105 °C and - 65 °C to 150 °C - Product standard
289 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 2516:2021 EN 2516:2020, IDT Aerospace series - Passivation of pr en 49.040 10.99 corrosion resisting steels and decontamination of nickel base alloys BAS/TC 63 prBAS EN 4708-103:2021 EN 4708-103:2019, IDT Aerospace series - Sleeving, heat- pr en 49.060, 10.99 shrinkable, for binding, insulation and 47.060 identification - Part 103: Fluoroelastomer sleeves - Operating temperature -55 °C to 200 °C - Product standard BAS/TC 63 prBAS EN 4708-106:2021 EN 4708-106:2018, IDT Aerospace series - Sleeving, heat- pr en 49.060 10.99 shrinkable, for binding, insulation and identification - Part 106: Limited fire hazard sleeving - Operating temperatures - 30 °C to 105 °C - Product standard BAS/TC 63 prBAS EN 4840-001:2021 EN 4840-001:2018, IDT Aerospace series - Heat shrinkable pr en 49.060, 10.99 moulded shapes - Part 001: Technical 29.120.99, specification 29.035.20 BAS/TC 63 prBAS EN 6049-003:2021 EN 6049-003:2018, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeve in meta- aramid fibres - Part 003: Braided, tubular, expandable - Product standard BAS/TC 63 prBAS EN 6049-001:2021 EN 6049-001:2018, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeve in meta- aramid fibres - Part 001: Technical specification BAS/TC 63 prBAS EN 4839-001:2021 EN 4839-001:2018, IDT Aerospace series - Arc fault circuit pr en 49.060 10.99 breakers, three-poles, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 001: Technical specification
BAS/TC 63 prBAS EN 4839-003:2021 EN 4839-003:2018, IDT Aerospace series - Arc Fault Circuit pr en 49.060 10.99 breakers, three-pole, temperature compensated, rated currents 3 A to 25 A, 115/200 V a.c. 400 Hz constant frequency - Part 003: Without auxiliary contacts - Product standard
290 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 9115:2021 EN 9115:2018, IDT Quality Management Systems - pr en 03.100.70, 10.99 Requirements for Aviation, Space and 49.020, Defense Organizations - Deliverable 35.080, Software (Supplement to EN 9100) 03.120.10 BAS/TC 63 prBAS EN 4681-001:2021 EN 4681-001:2019, IDT Aerospace series - Cables, electric, pr en 49.060 10.99 general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical specification BAS/TC 63 prBAS EN 4708-108:2021 EN 4708-108:2019, IDT Aerospace series - Sleeving, heat- pr en 49.060 10.99 shrinkable, for binding, insulation and identification - Part 108: Limited fire hazard sleeving - Operating temperatures - 65 °C to 150 °C - Product standard BAS/TC 63 prBAS EN 4539-2:2021 EN 4539-2:2019, IDT Aerospace series - Bearing, spherical, pr en 49.035 10.99 plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2: Inch series BAS/TC 63 prBAS EN 2369:2021 EN 2369:2018, IDT Aerospace series - Wires, heat resisting pr en 49.025.01 10.99 alloys - Diameter 0,2 mm ≤ D ≤ 8 mm - Dimensions BAS/TC 63 prBAS EN 6059-402:2021 EN 6059-402:2019, IDT Aerospace Series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeves - Test methods - Part 402: Bending properties
BAS/TC 63 prBAS EN 4652-221/Cor1:2021 EN 4652-221:2017/AC:2018, IDT Aerospace series - Connectors, coaxial, pr en 49.060 10.99 radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard BAS/TC 63 prBAS EN 4875:2021 EN 4875:2020, IDT Aerospace series - Surface treatments - pr en 49.040, 10.99 Test method for measurement of 25.220.99 electrical contact resistance
291 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 2475:2021 EN 2475:2018, IDT Aerospace series - Steel 30CrNiMo8 pr en 49.025.10 10.99 (1.6580) - Air melted - Hardened and tempered - Bar for machining - De ≤ 100 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
BAS/TC 63 prBAS EN 2450:2021 EN 2450:2018, IDT Aerospace series - Steel 31Ni10 - 1 230 pr en 49.025.10 10.99 MPa ≤ Rm ≤ 1 420 MPa - Bars - De ≤ 40 mm BAS/TC 63 prBAS EN 2366:2021 EN 2366:2019, IDT Aerospace series - Sheets and strips - pr en 49.025.01 10.99 Heat resisting alloys - Cold rolled - Thickness a ≤ 3 mm - Dimensions BAS/TC 63 prBAS EN 4730:2021 EN 4730:2018, IDT Aerospace series - Anthropometric pr en 49.095 10.99 dimensioning of aircraft seats BAS/TC 63 prBAS EN 4234:2021 EN 4234:2020, IDT Aerospace series - Clamps, worm drive - pr en 49.030.99 10.99 Dimensions, masses BAS/TC 63 prBAS EN 4859:2021 EN 4859:2019, IDT Aerospace series - Sensor based clamp pr en 49.030.20 10.99 load determination / high tensile bolts - Technical specification BAS/TC 63 prBAS EN 6096:2021 EN 6096:2019, IDT Aerospace series - Bearing, spherical pr en 49.035 10.99 plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series BAS/TC 63 prBAS EN 6097:2021 EN 6097:2019, IDT Aerospace series - Bearing, spherical pr en 49.035 10.99 plain, metal to metal, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series BAS/TC 63 prBAS EN 6098:2021 EN 6098:2019, IDT Aerospace series - Rod-end with pr en 49.035 10.99 bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series BAS/TC 63 prBAS EN 6133:2021 EN 6133:2019, IDT Aerospace series - Rod-end, with pr en 49.035 10.99 bearing per EN 6096, with self- lubricating liner in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series
292 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 6046:2021 EN 6046:2020, IDT Aerospace series - Bearing, spherical, pr en 49.035 10.99 plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series BAS/TC 63 prBAS EN 6055:2021 EN 6055:2019, IDT Aerospace series - Rod-end with pr en 49.035 10.99 bearing EN 4265 in corrosion resisting steel, external threaded shank - Dimensions and loads - Inch series BAS/TC 63 prBAS EN 6056:2021 EN 6056:2019, IDT Aerospace series - Rod-end with pr en 49.035 10.99 bearing per EN 4614 with self lubricating liner in corrosion resisting steel with external threaded shank - Dimensions and loads - Inch series BAS/TC 63 prBAS EN 3264:2021 EN 3264:2018, IDT Aerospace series - Pipe coupling 8°30' pr en 49.080 10.99 in titanium alloy - Thrust wire nuts BAS/TC 63 prBAS EN 4731:2021 EN 4731:2018, IDT Aerospace series - Spectral quality of pr en 29.140.99, 10.99 LED luminaires used with 49.095 photoluminescent marking systems BAS/TC 63 prBAS EN 2899:2021 EN 2899:2018, IDT Aerospace series - Vulcanized rubbers - pr en 49.025.40 10.99 Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers
BAS/TC 63 prBAS EN 3844-1:2021 EN 3844-1:2019, IDT Aerospace series - Flammability of non- pr en 49.025.15 10.99 metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation BAS/TC 63 prBAS EN 3844-2:2021 EN 3844-2:2019, IDT Aerospace series - Flammability of non- pr en 49.025.15 10.99 metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation BAS/TC 63 prBAS EN 3844-3:2021 EN 3844-3:2019, IDT Aerospace series - Flammability of non- pr en 49.025.15 10.99 metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration
293 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4842:2021 EN 4842:2019, IDT Aerospace series - X5CrNiCu15-5 pr en 49.025.15 10.99 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq) BAS/TC 63 prBAS EN 3837:2021 EN 3837:2019, IDT Aerospace series - Paints and varnishes pr en 49.040 10.99 - Nature and method for surface preparation of test pieces in aluminium alloys BAS/TC 63 prBAS EN 9278:2021 EN 9278:2018, IDT Aerospace series - General Principles of pr en 49.020, 10.99 Obsolescence Management of 21.020 chemicals, materials and processes BAS/TC 63 prBAS EN 4652-220:2021 EN 4652-220:2017, IDT Aerospace series - Connectors, coaxial, pr en 49.060 10.99 radio frequency - Part 220: Type 2, TNC interface - Crimp version - Straight plug - Product standard BAS/TC 63 prBAS EN 6049-008:2021 EN 6049-008:2017, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeve in meta- aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from - 55 °C to 200 °C - Product standard BAS/TC 63 prBAS EN 4652-321:2021 EN 4652-321:2017, IDT Aerospace series - Connectors, coaxial, pr en 49.060 10.99 radio frequency - Part 321: Type 3, N interface - Crimp assembly version - Right angle plug - Product standard
BAS/TC 63 prBAS EN 2346-005:2021 EN 2346-005:2017, IDT Aerospace series - Cable, electrical, fire pr en 49.060 10.99 resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard BAS/TC 63 prBAS EN 9130:2021 EN 9130:2020, IDT Aerospace series - Quality systems - pr en 49.020, 10.99 Record retention 03.120.10
294 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4710-01:2021 EN 4710-01:2018, IDT Aerospace series - Quick release pr en 49.035 10.99 fastening systems for non-structural applications - Part 01: Technical specification BAS/TC 63 prBAS EN 4710-03:2021 EN 4710-03:2018, IDT Aerospace series - Quick release pr en 49.035 10.99 fastening systems for non-structural applications - Part 03: Spring clamp BAS/TC 63 prBAS EN 4652-002:2021 EN 4652-002:2017, IDT Aerospace series - Connectors, coaxial, pr en 49.060 10.99 radiofrequency - Part 002: Specification of performances BAS/TC 63 prBAS EN 4072/Cor1:2021 EN 4072:2016/AC:2017, IDT Aerospace series - Screws, 100° pr en 49.030.20 10.99 countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C BAS/TC 63 prBAS EN 4162/Cor1:2021 EN 4162:2016/AC:2017, IDT Aerospace series - Screws 100° pr en 49.030.20 10.99 countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C BAS/TC 63 prBAS EN 9120:2021 EN 9120:2018, IDT Quality Management Systems - pr en 95.040, 10.99 Requirements for Aviation, Space and 03.100.70, Defence Distributors 49.020, 03.120.10 BAS/TC 63 prBAS EN 9110:2021 EN 9110:2018, IDT Quality Management Systems - pr en 03.100.70, 10.99 Requirements for Aviation Maintenance 49.020, Organizations 03.120.10 BAS/TC 63 prBAS EN 9300-115:2021 EN 9300-115:2018, IDT Aerospace series - LOTAR - LOng Term pr en 49.020, 10.99 Archiving and Retrieval of digital 35.240.30, technical product documentation such 35.240.10, as 3D, CAD and PDM data - Part 115: 01.110 Explicit CAD assembly structure
295 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 9300-110:2021 EN 9300-110:2018, IDT Aerospace series - LOTAR -LOng Term pr en 49.020, 10.99 Archiving and Retrieval of digital 35.240.30, technical product documentation such 01.110 as 3D, CAD and PDM data - Part 110: CAD mechanical 3D Explicit geometry information BAS/TC 63 prBAS EN 9300-200:2021 EN 9300-200:2018, IDT Aerospace series - LOTAR - LOng Term pr en 49.020, 10.99 Archiving and Retrieval of digital 35.240.30, technical product documentation such 01.110 as 3D, CAD and PDM data - Part 200: Common Concepts for LOng Term Archiving and Retrieval of Product Structure Information BAS/TC 63 prBAS EN 9300-100:2021 EN 9300-100:2018, IDT Aerospace series - LOTAR - Long Term pr en 49.020, 10.99 Archiving and Retrieval of digital 35.240.30, technical product documentation such 35.240.10, as 3D, CAD and PDM data - Part 100: 01.110 Common concepts for Long term archiving and retrieval of CAD 3D mechanical information BAS/TC 63 prBAS EN 9300-007:2021 EN 9300-007:2017, IDT Aerospace series - LOTAR -LOng Term pr en 49.020, 10.99 Archiving and Retrieval of digital 35.240.60, technical product documentation such 35.240.30, as 3D, CAD and PDM data - Part 007: 01.110 Terms and References BAS/TC 63 prBAS EN 9300-005:2021 EN 9300-005:2017, IDT Aerospace series - LOTAR - LOng Term pr en 49.020, 10.99 Archiving and Retrieval of digital 35.240.60, technical product documentation such 35.240.30, as 3D, CAD and PDM data - Part 005: 01.110 Authentication and Verification BAS/TC 63 prBAS EN 9300-002:2021 EN 9300-002:2018, IDT Aerospace series - LOTAR -LOng Term pr en 49.020, 10.99 Archiving and Retrieval of digital 35.240.60, technical product documentation such 35.240.30, as 3D, CAD and PDM data - Part 002: 01.110 Requirements BAS/TC 63 prBAS EN 6128:2021 EN 6128:2017, IDT Aerospace series - Blind bolt, 100° flush pr en 49.030.99 10.99 head, high strength
296 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 3904:2021 EN 3904:2017, IDT Aerospace series - Washers, wire pr en 49.030.50 10.99 locking in aluminium alloy, anodized BAS/TC 63 prBAS EN 9223-100:2021 EN 9223-100:2018, IDT Programme Management - pr en 49.020, 10.99 Configuration Management - Part 100: A 35.080 guide for the application of the principles of configuration management
BAS/TC 63 prBAS EN 9223-101:2021 EN 9223-101:2018, IDT Programme Management - pr en 49.020, 10.99 Configuration Management - Part 101: 35.080 Configuration identification BAS/TC 63 prBAS EN 9223-102:2021 EN 9223-102:2018, IDT Programme Management - pr en 49.020, 10.99 Configuration Management - Part 102: 35.080 Configuration status accounting BAS/TC 63 prBAS EN 9223-103:2021 EN 9223-103:2018, IDT Programme Management - pr en 03.100.70, 10.99 Configuration Management - Part 103: 49.020, Configuration Verifications, Reviews and 35.080 Audits BAS/TC 63 prBAS EN 9223-104:2021 EN 9223-104:2018, IDT Programme Management - pr en 03.100.70, 10.99 Configuration Management - Part 104: 49.020, Configuration Control 35.080 BAS/TC 63 prBAS EN 9223-105:2021 EN 9223-105:2018, IDT Programme Management - pr en 03.100.70, 10.99 Configuration Management - Part 105: 49.020, Glossary 35.080, 01.040.49, 01.040.03 BAS/TC 63 prBAS EN 9117:2021 EN 9117:2017, IDT Aerospace series - Delegated Product pr en 49.020 10.99 Release Verification BAS/TC 63 prBAS EN 9136:2021 EN 9136:2018, IDT Aerospace series - Root cause analysis pr en 49.020, 10.99 and problem solving (9S Methodology) 03.120.10
BAS/TC 63 prBAS EN 9138:2021 EN 9138:2019, IDT Aerospace Series - Quality Management pr en 49.020, 10.99 Systems - Statistical Product - 03.120.10 Acceptance Requirements BAS/TC 63 prBAS EN 9146:2021 EN 9146:2018, IDT Aerospace series - Foreign Object pr en 49.020 10.99 Damage (FOD) Prevention Program - Requirements for Aviation, Space, and Defence Organizations
297 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 9162:2021 EN 9162:2018, IDT Aerospace series - Aerospace Operator pr en 49.020 10.99 Self-Verification Programs BAS/TC 63 prBAS EN 4122:2021 EN 4122:2018, IDT Aerospace series - Shank nuts, self- pr en 49.030.30 10.99 locking, in heat resisting steel FE- PA2601 (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 °C BAS/TC 63 prBAS EN 4123:2021 EN 4123:2018, IDT Aerospace series - Shank nuts, self- pr en 49.030.30 10.99 locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature) / 600 °C BAS/TC 63 prBAS EN 4124:2021 EN 4124:2018, IDT Aerospace series - Shank nuts, self- pr en 49.030.30 10.99 locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C BAS/TC 63 prBAS EN 4604-007:2021 EN 4604-007:2019, IDT Aerospace series - Cable, electrical, for pr en 49.060 10.99 signal transmission - Part 007: Cable, coaxial, 50 ohms, 200 °C, type WN - Product standard BAS/TC 63 prBAS EN 2850:2021 EN 2850:2017, IDT Aerospace series - Carbon fibre pr en 49.025.40 10.99 thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction BAS/TC 63 prBAS EN 4289:2021 EN 4289:2019, IDT Aerospace series - Aluminium alloy AL- pr en 49.025.20 10.99 P7175- Forging stock BAS/TC 63 prBAS EN 6041:2021 EN 6041:2018, IDT Aerospace series - Non-metallic pr en 49.025.01 10.99 materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
BAS/TC 63 prBAS EN 6064:2021 EN 6064:2017, IDT Aerospace series - Analysis of non- pr en 49.025.01 10.99 metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
298 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 3155-077:2021 EN 3155-077:2019, IDT Aerospace series - Electrical contacts pr en 49.060 10.99 used in elements of connection - Part 077: Contacts, electrical, female, type A, crimp, class R - Product standard BAS/TC 63 prBAS EN 4008-004:2021 EN 4008-004:2017, IDT Aerospace series - Elements of pr en 49.060 10.99 electrical and optical connection - Crimping tools and associated accessories - Part 004: Die for crimping tool M22520/5-01 - Product standard
BAS/TC 63 prBAS EN 4008-003:2021 EN 4008-003:2017, IDT Aerospace series - Elements of pr en 49.060 10.99 electrical and optical connection - Crimping tools and associated accessories - Part 003: Positioner for crimping tool M22520/2-01 - Product standard BAS/TC 63 prBAS EN 6129/Coe1:2021 EN 6129:2016/AC:2017, IDT Aerospace series - Blind bolt, protruding pr en 49.030.60, 10.99 head, high strength, pulltype 49.030.20
BAS/TC 63 prBAS EN 2823:2021 EN 2823:2017, IDT Aerospace series - Fibre reinforced pr en 49.025.40 10.99 plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics
BAS/TC 63 prBAS EN 4840-101:2021 EN 4840-101:2018, IDT Aerospace series - Heat shrinkable pr en 49.060 10.99 moulded shapes - Part 101: Polyolefin, semi-rigid, limited fire hazard - Temperature range - 30 °C to 105 °C - Product standard
299 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4612-007:2021 EN 4612-007:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 007: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
BAS/TC 63 prBAS EN 4612-008:2021 EN 4612-008:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard BAS/TC 63 prBAS EN 4612-009:2021 EN 4612-009:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 009: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
300 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4612-011:2021 EN 4612-011:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 011: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
BAS/TC 63 prBAS EN 4612-012:2021 EN 4612-012:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 012: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard BAS/TC 63 prBAS EN 4612-002:2021 EN 4612-002:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 002: Genera BAS/TC 63 prBAS EN 4612-003:2021 EN 4612-003:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 003: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
301 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4612-004:2021 EN 4612-004:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
BAS/TC 63 prBAS EN 4612-005:2021 EN 4612-005:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
BAS/TC 63 prBAS EN 4612-006:2021 EN 4612-006:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 006: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
BAS/TC 63 prBAS EN 2714-013:2021 EN 2714-013:2017, IDT Aerospace series - Cables, electrical, pr en 49.060 10.99 single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 013: DR family, screened (spiral) and jacketed, UV laser printable - Product standard
302 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4652-221:2021 EN 4652-221:2017, IDT Aerospace series - Connectors, coaxial, pr en 49.060 10.99 radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard BAS/TC 63 prBAS EN 4652-322:2021 EN 4652-322:2017, IDT Aerospace series - Connectors, coaxial, pr en 49.060 10.99 radio frequency - Part 322: Type 3, N interface - Crimp version - Square flange receptacle - Product standard
BAS/TC 63 prBAS EN 4855-01:2021 EN 4855-01:2020, IDT Aerospace series - ECO efficiency of pr en 67.250, 10.99 catering equipment - Part 01: General 49.020 conditions BAS/TC 63 prBAS EN 4855-02:2021 EN 4855-02:2020, IDT Aerospace series - ECO efficiency of pr en 67.250, 10.99 catering equipment - Part 02: Oven 49.020 equipment BAS/TC 63 prBAS EN 4855-03:2021 EN 4855-03:2020, IDT Aerospace series - ECO efficiency of pr en 67.250, 10.99 catering equipment - Part 03: Chilling 49.020 equipment BAS/TC 63 prBAS EN 4855-04:2021 EN 4855-04:2020, IDT Aerospace series - ECO efficiency of pr en 67.250, 10.99 catering equipment - Part 04: Beverage 49.020 makers BAS/TC 63 prBAS EN 4856:2021 EN 4856:2018, IDT Rotorcraft - Emergency Breathing pr en 49.095 10.99 Systems (EBS) - Requirements, testing and marking BAS/TC 63 prBAS EN 4652-320:2021 EN 4652-320:2017, IDT Aerospace series - Connectors, coaxial, pr en 49.060 10.99 radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard BAS/TC 63 prBAS EN 4652-222:2021 EN 4652-222:2017, IDT Aerospace series - Connectors, coaxial, pr en 49.060 10.99 radio frequency - Part 222: Type 2, TNC interface - Crimp version - Square flange receptacle - Product standard
303 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4612-010:2021 EN 4612-010:2019, IDT Aerospace series - Cables, electrical, for pr en 49.060 10.99 general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 010: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard BAS/TC 63 prBAS EN 4708-105:2021 EN 4708-105:2019, IDT Aerospace series - Sleeving, heat- pr en 49.060 10.99 shrinkable, for binding, insulation and identification - Part 105: Semi-flexible polyvinylidene fluoride (PVDF) - Temperature range – 55 °C to 150 °C - Product standard BAS/TC 63 prBAS EN 4708-107:2021 EN 4708-107:2019, IDT Aerospace series - Sleeving, heat- pr en 49.060 10.99 shrinkable, for binding, insulation and identification - Part 107: Polytetrafluoroethylene (PTFE) - Operating temperatures - 65 °C to 260 °C - Product standard BAS/TC 63 prBAS EN 9101:2021 EN 9101:2018, IDT Quality Management Systems - Audit pr en 03.100.70, 10.99 Requirements for Aviation, Space, and 49.020, Defence Organisations 03.120.20, 03.120.10 BAS/TC 63 prBAS EN 4810:2021 EN 4810:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes - Inch series BAS/TC 63 prBAS EN 4811:2021 EN 4811:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Gasket seal with fluorocarbon seal on aluminium plate with 4 fastening holes - Inch series BAS/TC 63 prBAS EN 4812:2021 EN 4812:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes - Inch series
304 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4813:2021 EN 4813:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Cap, in heat resisting steel - Inch series
BAS/TC 63 prBAS EN 4814:2021 EN 4814:2017, IDT Aerospace series - Flange couplings up pr en 49.080 10.99 to 21 000 kPa - Technical specification - Inch series BAS/TC 63 prBAS EN 4816:2021 EN 4816:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Gasket seal with nickel alloy C seal - Technical specification - Inch series BAS/TC 63 prBAS EN 6029:2021 EN 6029:2017, IDT Aerospace series - Rod-ends, pr en 49.035 10.99 adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel - Dimensions and loads - Inch series BAS/TC 63 prBAS EN 4702-02:2021 EN 4702-02:2017, IDT Aerospace series - Quick release pr en 49.035 10.99 fastening systems for non-structural and lining applications - Part 02: Spring clamp stud combination BAS/TC 63 prBAS EN 4702-03:2021 EN 4702-03:2017, IDT Aerospace series - Quick release pr en 49.035 10.99 fastening systems for non-structural and lining applications - Part 03: Stud - quick- release and locking BAS/TC 63 prBAS EN 4702-04:2021 EN 4702-04:2017, IDT Aerospace series - Quick release pr en 49.035 10.99 fastening systems for non-structural and lining applications - Part 04: Spring clamp BAS/TC 63 prBAS EN 4702-05:2021 EN 4702-05:2017, IDT Aerospace series - Quick release pr en 49.035 10.99 fastening systems for non-structural and lining applications - Part 05: Retaining washer BAS/TC 63 prBAS EN 6059-301:2021 EN 6059-301:2017, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeves - Test methods - Part 301: Sun light exposure
305 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 6059-302:2021 EN 6059-302:2017, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeves - Test methods - Part 302: High temperature exposure BAS/TC 63 prBAS EN 2713-012:2021 EN 2713-012:2017, IDT Aerospace series - Cables, electrical, pr en 49.060 10.99 single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
BAS/TC 63 prBAS EN 4852:2021 EN 4852:2019, IDT Aerospace series - External spiral drive pr en 49.030.20 10.99 heads for threaded fasteners - Geometrical definition and fastener head wrenching configuration BAS/TC 63 prBAS EN 9132:2021 EN 9132:2017, IDT Aerospace series - Quality management pr en 03.100.70, 10.99 systems - Data Matrix Quality 49.020, Requirements for Parts Marking 03.120.10
BAS/TC 63 prBAS EN 4681-005:2021 EN 4681-005:2019, IDT Aerospace series - Cables, electric, pr en 49.060 10.99 general purpose, with conductors in aluminium or copper-clad aluminium - Part 005: AZ family, single, for use in low pressure atmosphere - Product standard BAS/TC 63 prBAS EN 4681-006:2021 EN 4681-006:2019, IDT Aerospace series - Cables, electric, pr en 49.060 10.99 general purpose, with conductors in aluminium or copper-clad aluminium - Part 006: AZA family, single and multicore assembly, for use in low pressure atmosphere - Product standard BAS/TC 63 prBAS EN 4706:2021 EN 4706:2019, IDT Aerospace series - LED colour and pr en 29.140.99, 10.99 brightness ranking 49.095
306 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 3155-017:2021 EN 3155-017:2020, IDT Aerospace series - Electrical contacts pr en 49.060 10.99 used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard BAS/TC 63 prBAS EN 3155-018:2021 EN 3155-018:2020, IDT Aerospace series - Electrical contacts pr en 49.060 10.99 used in elements of connection - Part 018: Contacts, electrical, male, type A, crimp, class S - Product standard BAS/TC 63 prBAS EN 3155-019:2021 EN 3155-019:2019, IDT Aerospace series - Electrical contacts pr en 49.060 10.99 used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard BAS/TC 63 prBAS EN 3155-044:2021 EN 3155-044:2019, IDT Aerospace series - Electrical contacts pr en 49.060 10.99 used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard BAS/TC 63 prBAS EN 3155-045:2021 EN 3155-045:2019, IDT Aerospace series - Electrical contacts pr en 49.060 10.99 used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard BAS/TC 63 prBAS EN 3155-016:2021 EN 3155-016:2019, IDT Aerospace series - Electrical contacts pr en 49.060 10.99 used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard BAS/TC 63 prBAS EN 4854-1:2021 EN 4854-1:2019, IDT Aerospace series - Bearing, spherical pr en 49.035 10.99 plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series - Part 1: Dimensions and loads for narrow series
307 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4854-2:2021 EN 4854-2:2019, IDT Aerospace series - Bearing, spherical pr en 49.035 10.99 plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series - Part 2: Dimensions and loads
BAS/TC 63 prBAS EN 4854-3:2021 EN 4854-3:2019, IDT Aerospace series — Bearing, spherical pr en 49.035 10.99 plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions — Part 3: Technical specification
BAS/TC 63 prBAS EN 3155-003:2021 EN 3155-003:2019, IDT Aerospace series - Electrical contacts pr en 49.060 10.99 used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product standard BAS/TC 63 prBAS EN 3155-076:2021 EN 3155-076:2019, IDT Aerospace series - Electrical contacts pr en 49.060 10.99 used in elements of connection - Part 076: Contacts, electrical, male, type A, crimp, class R - Product standard BAS/TC 63 prBAS EN 2879:2021 EN 2879:2017, IDT Aerospace series - Nuts, anchor, self- pr en 49.030.30 10.99 locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C BAS/TC 63 prBAS EN 4297:2021 EN 4297:2017, IDT Aerospace series - Nuts, hexagon, self- pr en 49.030.30 10.99 locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 120 °C BAS/TC 63 prBAS EN 3903:2021 EN 3903:2017, IDT Aerospace series - Washers, laminated, pr en 49.030.50 10.99 in corrosion resisting steel
308 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 9103/Cor1:2021 EN 9103:2014/AC:2015, IDT Aerospace series - Quality management pr en 03.100.70, 10.99 systems - Variation management of key 49.020, characteristics 03.120.10 BAS/TC 63 prBAS EN 4727:2021 EN 4727:2017, IDT Aerospace series - Standardized pr en 49.095 10.99 passenger seat weight information BAS/TC 63 prBAS EN 4801:2021 EN 4801:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Swivel flange with 3 fastening holes, in heat resisting steel - Inch series BAS/TC 63 prBAS EN 4802:2021 EN 4802:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Swivel flange with 3 fastening holes, in nickel alloy - Inch series BAS/TC 63 prBAS EN 4803:2021 EN 4803:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Swivel flange with 4 fastening holes, in heat resisting steel - Inch series BAS/TC 63 prBAS EN 4804:2021 EN 4804:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Swivel flange with 4 fastening holes, in nickel alloy - Inch series BAS/TC 63 prBAS EN 4805:2021 EN 4805:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Weld coupling, straight, in heat resisting steel - Inch series BAS/TC 63 prBAS EN 4806:2021 EN 4806:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Weld coupling, straight, in nickel alloy - Inch series BAS/TC 63 prBAS EN 4807:2021 EN 4807:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Weld coupling, 90° elbow, in heat resisting steel - Inch series BAS/TC 63 prBAS EN 4808:2021 EN 4808:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Weld coupling, 90° elbow, in nickel alloy - Inch series BAS/TC 63 prBAS EN 4809:2021 EN 4809:2017, IDT Aerospace series - Flange couplings - pr en 49.080 10.99 Gasket seal with fluorocarbon seal on aluminium plate with 3 fastening holes - Inch series
309 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 2997-001:2021 EN 2997-001:2017, IDT Aerospace series - Connectors, pr en 49.060 10.99 electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 001: Technical specification BAS/TC 63 prBAS EN 4708-101:2021 EN 4708-101:2017, IDT Aerospace series - Sleeving, heat- pr en 49.060 10.99 shrinkable, for binding, insulation and identification - Part 101: Polyolefin sleeving - Operating temperatures -55 °C to 135 °C - Product standard BAS/TC 63 prBAS EN 6059-503:2021 EN 6059-503:2017, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeves - Test methods - Part 503: Temperature rise due to rated current injected on the sleeve BAS/TC 63 prBAS EN 6075:2021 EN 6075:2017, IDT Aerospace series - Static seal elements pr en 49.035 10.99 O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) - Inch series BAS/TC 63 prBAS EN 6076:2021 EN 6076:2017, IDT Aerospace series - Static seal elements pr en 49.035 10.99 O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C) - Inch series BAS/TC 63 prBAS EN 6138:2021 EN 6138:2017, IDT Aerospace series - Cap, protective, non- pr en 49.080 10.99 metallic for fitting ends ≤ 3 000 PSI hydraulic systems BAS/TC 63 prBAS EN 4178:2021 EN 4178:2017, IDT Aerospace series - Screws, pan head, pr en 49.030.20, 10.99 six lobe recess, coarse tolerance normal 49.030.10 shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
310 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 2997-006:2021 EN 2997-006:2017, IDT Aerospace series - Connectors, pr en 49.060 10.99 electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
BAS/TC 63 prBAS EN 3820:2021 EN 3820:2017, IDT Aerospace series - Metric bolts, normal pr en 49.030.20 10.99 hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C BAS/TC 63 prBAS EN 4531-001:2021 EN 4531-001:2017, IDT Aerospace series - Connectors, optical, pr en 49.060, 10.99 circular, single and multipin, coupled by 49.090 triple start threaded ring - Flush contacts - Part 001: Technical specification
BAS/TC 63 prBAS EN 4533-002:2021 EN 4533-002:2017, IDT Aerospace series - Fibre optic systems - pr en 49.060 10.99 Handbook - Part 002: Test and measurement BAS/TC 63 prBAS EN 4533-003:2021 EN 4533-003:2017, IDT Aerospace series - Fibre optic systems - pr en 49.060 10.99 Handbook - Part 003: Looming and installation practices BAS/TC 63 prBAS EN 4644-001:2021 EN 4644-001:2017, IDT Aerospace series - Connector, electrical pr en 49.060, 10.99 and optical, rectangular, modular, 49.090 rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 001: Technical specification BAS/TC 63 prBAS EN 4652-420:2021 EN 4652-420:2017, IDT Aerospace series - Connectors, coaxial, pr en 49.060 10.99 radio frequency - Part 420: Type 4, C interface - Crimp assembly version - Straight plug - Product standard
311 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4652-421:2021 EN 4652-421:2017, IDT Aerospace series - Connectors, coaxial, pr en 49.060 10.99 radio frequency - Part 421: Type 4, C interface - Crimp assembly version - Right angle plug - Product standard
BAS/TC 63 prBAS EN 4691-1:2021 EN 4691-1:2017, IDT Aerospace series - Tie rod with pr en 49.035 10.99 integrated bolts - Part 1: Technical specification BAS/TC 63 prBAS EN 4693:2021 EN 4693:2017, IDT Aerospace series - Tie rod with pr en 49.035 10.99 integrated bolts - Assembly code A, B and C BAS/TC 63 prBAS EN 4694:2021 EN 4694:2017, IDT Aerospace series - Tie rod with pr en 49.035 10.99 integrated bolts - Assembly code D, E and F BAS/TC 63 prBAS EN 4695:2021 EN 4695:2017, IDT Aerospace series - Tie Rod with pr en 49.035 10.99 integrated bolts - Assembly Code G, H and K BAS/TC 63 prBAS EN 4692:2021 EN 4692:2017, IDT Aerospace series - Tie Rod with pr en 49.035 10.99 integrated bolts -Locking clip BAS/TC 63 prBAS EN 4179:2021 EN 4179:2017, IDT Aerospace series - Qualification and pr en 49.020, 10.99 approval of personnel for non- 19.100, destructive testing 03.100.30 BAS/TC 63 prBAS EN 4674-001:2021 EN 4674-001:2017, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification BAS/TC 63 prBAS EN 4674-003:2021 EN 4674-003:2017, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Self-wrapping shielding (EMI) protective sleeve - Part 003: Open sleeve - Inside pressurized area - EMI protection 5 kA - Temperature range - 65 °C to 200 °C - Product standard
312 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4674-004:2021 EN 4674-004:2017, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Self-wrapping shielding (EMI) protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range - 65 °C to 200 °C - Product standard
BAS/TC 63 prBAS EN 4708-104:2021 EN 4708-104:2017, IDT Aerospace series - Sleeving, heat- pr en 49.060 10.99 shrinkable, for binding, insulation and identification - Part 104: Semi-rigid polyvinylidene fluoride (PDVF) - Operating temperature - 55 °C to 175 °C - Product Standard BAS/TC 63 prBAS EN 4729:2021 EN 4729:2017, IDT Aerospace series - Trivalent chromium pr en 25.220.99 10.99 based chemical conversion coatings for aluminium and aluminium alloys
BAS/TC 63 prBAS EN 6059-303:2021 EN 6059-303:2017, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeves - Test methods - Part 303: Resistance to fluids
BAS/TC 63 prBAS EN 6059-304:2021 EN 6059-304:2017, IDT Aerospace series - Electrical cables, pr en 49.060, 10.99 installation - Protection sleeves - Test 13.220.40 methods - Part 304: Flammability BAS/TC 63 prBAS EN 2997-002:2021 EN 2997-002:2016, IDT Aerospace series - Connectors, pr en 49.060 10.99 electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact arrangements
313 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 2997-014:2021 EN 2997-014:2016, IDT Aerospace series - Connectors, pr en 49.060 10.99 electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 014: Square flange receptacle with integrated accessory - Product standard
BAS/TC 63 prBAS EN 3909:2021 EN 3909:2016, IDT Aerospace series - Test fluids and test pr en 49.060 10.99 methods for electrical and optical components and sub-assemblies BAS/TC 63 prBAS EN 9239:2021 EN 9239:2016, IDT Aerospace series - Programme pr en 49.060, 10.99 Management - Guide for the risk 49.020 management BAS/TC 63 prBAS EN 2714-014:2021 EN 2714-014:2016, IDT Aerospace series - Cables, electrical, pr en 49.060 10.99 single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 014: DR family, 4 to 11 cores, taped, screened (braided) and jacketed, UV laser printable - Product standard BAS/TC 63 prBAS EN 6049-009:2021 EN 6049-009:2016, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeve in meta- aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from - 55 °C to 260 °C - Product standard
BAS/TC 63 prBAS EN 4073:2021 EN 4073:2016, IDT Aerospace series - Screws, pan head, pr en 49.030.20 10.99 hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
314 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4138:2021 EN 4138:2016, IDT Aerospace series - Screws, pan head, pr en 49.030.20 10.99 offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C BAS/TC 63 prBAS EN 4376:2021 EN 4376:2016, IDT Aerospace series - Heat resisting alloy pr en 49.025.01 10.99 NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De ≤ 200 mm BAS/TC 63 prBAS EN 2997-007:2021 EN 2997-007:2016, IDT Aerospace series - Connectors, pr en 49.060 10.99 electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 007: Hermetic receptacle with round flange attached by welding or brazing - Product standard
BAS/TC 63 prBAS EN 4072:2021 EN 4072:2016, IDT Aerospace series - Screws, 100° pr en 49.030.20 10.99 countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
BAS/TC 63 prBAS EN 4128:2021 EN 4128:2016, IDT Aerospace series - Bolts, normal pr en 49.030.20 10.99 hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 °C
315 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4162:2021 EN 4162:2016, IDT Aerospace series - Screws 100° pr en 49.030.20, 10.99 countersunk normal head, offset 49.025.01 cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C BAS/TC 63 prBAS EN 4163:2021 EN 4163:2016, IDT Aerospace series - Screws 100° pr en 49.030.20, 10.99 countersunk normal head, offset 49.030.10 cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
BAS/TC 63 prBAS EN 4531-002:2021 EN 4531-002:2016, IDT Aerospace series - Connectors, optical, pr en 49.060 10.99 circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements
BAS/TC 63 prBAS EN 4531-101:2021 EN 4531-101:2016, IDT Aerospace series - Connectors, optical, pr en 49.060 10.99 circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641 multimode cable -55 °C to 125 °C - Product standard BAS/TC 63 prBAS EN 4531-201:2021 EN 4531-201:2016, IDT Aerospace series - Connectors, optical, pr en 49.090 10.99 circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 201: Optical contact for EN 4641 singlemode cable -55 °C to 125 °C - Product standard
316 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4644-002:2021 EN 4644-002:2016, IDT Aerospace series - Connector, electrical pr en 49.060, 10.99 and optical, rectangular, modular, 49.090 rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements
BAS/TC 63 prBAS EN 4644-003:2021 EN 4644-003:2016, IDT Aerospace series - Connector, electrical pr en 49.060, 10.99 and optical, rectangular, modular, 49.090 rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 003: Rectangular inserts - Product standard BAS/TC 63 prBAS EN 4644-133:2021 EN 4644-133:2016, IDT Aerospace series - Connector, electrical pr en 49.060, 10.99 and optical, rectangular, modular, 49.090 rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 133: Size 3 receptacle for rack and panel application, class C and D - Product Standard
BAS/TC 63 prBAS EN 4644-141:2021 EN 4644-141:2016, IDT Aerospace series - Connector, electrical pr en 49.060, 10.99 and optical, rectangular, modular, 49.090 rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 141: Size 4 plug for rack and panel applications, class C and D - Product standard BAS/TC 63 prBAS EN 4644-142:2021 EN 4644-142:2016, IDT Aerospace series - Connector, electrical pr en 49.060, 10.99 and optical, rectangular, modular, 49.090 rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 142: Size 4 receptacle for rack and panel application, class C and D - Product standard
317 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 4697:2021 EN 4697:2016, IDT Aerospace series - General and pr en 49.095 10.99 installation requirements for passenger seat fittings BAS/TC 63 prBAS EN 4700-002:2021 EN 4700-002:2016, IDT Aerospace series - Steel and heat pr en 49.025.10 10.99 resisting alloys - Wrought products - Technical specification - Part 002: Bar and section BAS/TC 63 prBAS EN 4701-002:2021 EN 4701-002:2016, IDT Aerospace series - Connectors, optical, pr en 49.090 10.99 rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 002: Specification of performance BAS/TC 63 prBAS EN 2714-002:2021 EN 2714-002:2016, IDT Aerospace series - Cables, electrical, pr en 49.060 10.99 single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 002: Screened and jacketed - General BAS/TC 63 prBAS EN 3672:2021 EN 3672:2016, IDT Aerospace series - Shank nuts, self- pr en 49.030.30 10.99 locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C BAS/TC 63 prBAS EN 4534-2:2021 EN 4534-2:2016, IDT Aerospace series - Bushes, plain in pr en 49.030.99, 10.99 aluminium alloy with self-lubricating 49.035 liner, elevated load - Part 2: Dimensions and loads - Inch series BAS/TC 63 prBAS EN 4535-2:2021 EN 4535-2:2016, IDT Aerospace series - Bushes, flanged in pr en 49.035 10.99 aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series BAS/TC 63 prBAS EN 6080:2021 EN 6080:2016, IDT Aerospace series - Rivet, 100° normal pr en 49.030.60 10.99 flush head, close tolerance - Inch series
BAS/TC 63 prBAS EN 6081:2021 EN 6081:2016, IDT Aerospace series - Rivet, universal pr en 49.030.60 10.99 head, close tolerance - Inch series
318 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 9104-002:2021 EN 9104-002:2016, IDT Aerospace series - Quality management pr en 03.100.70, 10.99 systems - Part 002: Requirements for 49.020, Oversight of Aerospace Quality 03.120.20, Management System 03.120.10 Registration/Certification Programs
BAS/TC 63 prBAS EN 6059-202:2021 EN 6059-202:2016, IDT Aerospace series - Electrical cables, pr en 49.060 10.99 installation - Protection sleeves - Test methods - Part 202: Dimensions and mass BAS/TC 63 prBAS EN 2997-005:2021 EN 2997-005:2016, IDT Aerospace series - Connectors, pr en 49.060 10.99 electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 005: Hermetic square flange receptacle - Product standard
BAS/TC 63 prBAS EN 3902:2021 EN 3902:2016, IDT Aerospace series - Washers for rivet pr en 49.030.50 10.99 assemblies, in aluminium alloy, anodized, metric series BAS/TC 63 prBAS EN 4309:2021 EN 4309:2016, IDT Aerospace series - Nuts, hexagon, self- pr en 49.030.30 10.99 locking by plastic ring, normal height, normal across flats, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 120 °C
BAS/TC 63 prBAS EN 6090:2021 EN 6090:2016, IDT Aerospace series - Washer, retaining pr en 49.030.50 10.99
BAS/TC 63 prBAS EN 6092:2021 EN 6092:2016, IDT Aerospace series - Receptacle, floating, pr en 49.030.99 10.99 double lug BAS/TC 63 prBAS EN 6094:2021 EN 6094:2016, IDT Aerospace series - Washer, spring, pr en 49.030.50 10.99 countersunk BAS/TC 63 prBAS EN 6101:2021 EN 6101:2016, IDT Aerospace series - Rivet, 100° medium pr en 49.030.60 10.99 flush head, close tolerance - Inch series
BAS/TC 63 prBAS EN 6105:2021 EN 6105:2016, IDT Aerospace series - Stud with shoulder pr en 49.030.20 10.99
319 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 63 prBAS EN 6129:2021 EN 6129:2016, IDT Aerospace series - Blind bolt, protruding pr en 49.030.60, 10.99 head, high strength, pulltype 49.030.20
BAS/TC 64 prBAS CEN/TR 17447:2021 CEN/TR 17447:2020, IDT Space - Use of GNSS-based positioning pr en 35.240.60, 10.99 for road Intelligent Transport System 33.060.30, (ITS) - Mathematical PVT error model 03.220.20
BAS/TC 64 prBAS CEN/TR 17448:2021 CEN/TR 17448:2020, IDT Space - Use of GNSS-based positioning pr en 35.240.60, 10.99 for road Intelligent Transport Systems 33.060.30, (ITS) - Metrics and Performance levels 03.220.20 detailed definition BAS/TC 64 prBAS CEN/TR 17464:2021 CEN/TR 17464:2020, IDT Space - Use of GNSS-based positioning pr en 35.240.60, 10.99 for road Intelligent Transport System 33.060.30, (ITS) - Security attacks modelling and 03.220.20 definition of performance features and metrics related to security
BAS/TC 64 prBAS CEN/TR 17465:2021 CEN/TR 17465:2020, IDT Space - Use of GNSS-based positioning pr en 35.240.60, 10.99 for road Intelligent Transport Systems 33.060.30, (ITS) - Field tests definition for basic 03.220.20 performance BAS/TC 64 prBAS CEN/TR 17475:2021 CEN/TR 17475:2020, IDT Space - Use of GNSS-based positioning pr en 35.240.60, 10.99 for road Intelligent Transport System 33.060.30, (ITS) - Specification of the test facilities, 03.220.20 definition of test scenarios, description and validation of the procedures for field tests related to security performance of GNSS-based positioning terminals
BAS/TC 64 prBAS CLC/TR 62258-4:2021 CLC/TR 62258-4:2013, IDT; IEC Semiconductor die products - Part 4: pr en,fr 31.080.99 10.99 TR 62258-4:2012, IDT Questionnaire for die users and suppliers BAS/TC 64 prBAS EN 16602-10-09:2021 EN 16602-10-09:2020, IDT Space product assurance - pr en 49.140 10.99 Nonconformance control system BAS/TC 64 prBAS EN 16602-20:2021 EN 16602-20:2020, IDT Space product assurance - Quality pr en 49.140 10.99 assurance
320 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS EN 16602-70-17:2021 EN 16602-70-17:2020, IDT Space product assurance - Durability pr en 49.140, 10.99 testing of coatings and surface finishes 49.040
BAS/TC 64 prBAS EN 16603-11:2021 EN 16603-11:2019, IDT; ISO Space engineering - Definition of the pr en 49.140 10.99 16290:2013, MOD Technology Readiness Levels (TRLs) and their criteria of assessment BAS/TC 64 prBAS EN 16603-20-21:2021 EN 16603-20-21:2020, IDT Space engineering - Interface pr en 49.140 10.99 requirements for electrical actuators BAS/TC 64 prBAS EN 16603-32-10:2021 EN 16603-32-10:2020, IDT Space engineering - Structural factors of pr en 49.140 10.99 safety for spaceflight hardware BAS/TC 64 prBAS EN 16603-40-07:2021 EN 16603-40-07:2020, IDT Space engineering - Simulation pr en 49.140 10.99 modelling platform BAS/TC 64 prBAS EN 16603-50-12:2021 EN 16603-50-12:2020, IDT Space engineering - SpaceWire - Links, pr en 49.140 10.99 nodes, routers and networks BAS/TC 64 prBAS EN 16603-60-20:2021 EN 16603-60-20:2020, IDT Space engineering - Star sensor pr en 49.140, 10.99 terminology and performance 01.040.49 specification BAS/TC 64 prBAS EN 16604-20:2021 EN 16604-20:2020, IDT Space sustainability - Planetary pr en 49.140 10.99 protection BAS/TC 64 prBAS EN 16604-30-03:2021 EN 16604-30-03:2020, IDT Space - Space Situational Awareness pr en 49.140, 10.99 Monitoring - Part 30-03: Observation 35.240.99 System Data Message (OSDM) BAS/TC 64 prBAS EN 17350:2021 EN 17350:2020, IDT SCM - Scheduling and Commanding pr en 49.140 10.99 Message - Standard BAS/TC 64 prBAS EN 45552:2021 EN 45552:2020, IDT General method for the assessment of pr en 13.020.20 10.99 the durability of energy-related products
BAS/TC 64 prBAS EN 45553:2021 EN 45553:2020, IDT General method for the assessment of pr en 13.030.50 10.99 the ability to remanufacture energy- related products BAS/TC 64 prBAS EN 45554:2021 EN 45554:2020, IDT General methods for the assessment of pr en 13.030.50 10.99 the ability to repair, reuse and upgrade energy-related products BAS/TC 64 prBAS EN 45555:2021 EN 45555:2019, IDT General methods for assessing the pr en 13.020.20 10.99 recyclability and recoverability of energy- related products
321 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS EN 45557:2021 EN 45557:2020, IDT General method for assessing the pr en 13.020.20 10.99 proportion of recycled material content in energy-related products BAS/TC 64 prBAS EN 50342-2:2021 EN 50342-2:2019, IDT Lead-acid starter batteries - Part 2: pr en 29.220.20 10.99 Dimensions of batteries and marking of terminals BAS/TC 64 prBAS EN 50465/A1:2021 EN 50465:2015/A1:2019, IDT; Gas appliances - Combined heat and pr en 27.070, 10.99 EN 50465:2015/A1:2019, IDT power appliance of nominal heat input 97.100.20 inferior or equal to 70 kW BAS/TC 64 prBAS EN 50980-1:2021 EN 50980-1:2019, IDT Remote alcohol monitoring devices - pr en 71.040.40 10.99 Test methods and performance requirements - Part 1: Instruments for assessment programmes BAS/TC 64 prBAS EN 60068-2-64/A1:2021 EN 60068-2-64:2008/A1:2019, Environmental testing - Part 2-64: Tests - pr en,fr 19.040 10.99 IDT; IEC 60068-2- Test Fh: Vibration, broadband random 64:2008/AMD1:2019, IDT and guidance BAS/TC 64 prBAS EN 60747-16-5/A1:2021 EN 60747-16-5:2013/A1:2020, Semiconductor devices - Part 16-5: pr en,fr 31.080.99 10.99 IDT; IEC 60747-16- Microwave integrated circuits - 5:2013/AMD1:2020/COR1:2020, Oscillators IDT; IEC 60747-16- 5:2013/AMD1:2020, IDT BAS/TC 64 prBAS EN 61191-2/Cor 1:2021 EN 61191-2:2017/AC:2019-10, Printed board assemblies - Part 2: pr en 31.240, 10.99 IDT; IEC 61191- Sectional specification - Requirements 31.190 2:2017/COR1:2019, IDT for surface mount soldered assemblies
BAS/TC 64 prBAS EN 61709/Cor 1:2021 EN 61709:2017/AC:2019-11, Electric components - Reliability - pr en,fr 31.020 10.99 IDT; IEC Reference conditions for failure rates 61709:2017/COR1:2019, IDT and stress models for conversion BAS/TC 64 prBAS EN IEC 31010:2021 EN IEC 31010:2019, IDT; IEC Risk management - Risk assessment pv hr,en 03.100.01 10.99 31010:2019, IDT; IEC techniques 31010:2019, IDT BAS/TC 64 prBAS EN IEC 60068-3-3:2021 EN IEC 60068-3-3:2019, IDT; Environmental testing - Part 3-3: pr en,fr 19.040 10.99 IEC 60068-3-3:2019, IDT Supporting documentation and guidance - Seismic test methods for equipment
322 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS EN IEC 60068-3-7:2021 EN IEC 60068-3-7:2020, IDT; Environmental testing - Part 3-7: pr en,fr 29.020, 10.99 IEC 60068-3-7:2020, IDT Supporting documentation and guidance 19.040 - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load) BAS/TC 64 prBAS EN IEC 60086-4/Cor EN IEC 60086-4:2019/AC:2019- Primary batteries - Part 4: Safety of pr en,fr 29.220.10 10.99 1:2021 11, IDT; IEC 60086- lithium batteries 4:2019/COR1:2019, IDT BAS/TC 64 prBAS EN IEC 60086-4/Cor EN IEC 60086-4:2019/AC:2020- Primary batteries - Part 4: Safety of pr en,fr 29.220.10 10.99 2:2021 05, IDT; IEC 60086- lithium batteries 4:2019/COR2:2020, IDT BAS/TC 64 prBAS EN IEC 60086-6:2021 EN IEC 60086-6:2020, IDT; IEC Primary batteries - Part 6: Guidance on pr en,fr 29.220.10 10.99 60086-6:2020, IDT environmental aspects BAS/TC 64 prBAS EN IEC 60565-1:2021 EN IEC 60565-1:2020, IDT; IEC Underwater acoustics - Hydrophones - pr en,fr 17.140.50 10.99 60565-1:2020, IDT Calibration of hydrophones - Part 1: Procedures for free-field calibration of hydrophones BAS/TC 64 prBAS EN IEC 60565-2:2021 EN IEC 60565-2:2019, IDT; IEC Underwater acoustics - Hydrophones - pr en,fr 17.140.50 10.99 60565-2:2019, IDT Calibration of hydrophones - Part 2: Procedures for low frequency pressure calibration BAS/TC 64 prBAS EN IEC 60721-3-0:2021 EN IEC 60721-3-0:2020, IDT; Classification of environmental pr en,fr 19.040 10.99 IEC 60721-3-0:2020, IDT conditions - Part 3-0: Classification of groups of environmental parameters and their severities - Introduction BAS/TC 64 prBAS EN IEC 60747-5-5:2021 EN IEC 60747-5-5:2020, IDT; Semiconductor devices - Part 5-5: pr en 31.260, 10.99 IEC 60747-5-5:2020, IDT Optoelectronic devices - Photocouplers 31.080.01
BAS/TC 64 prBAS EN IEC 60749-15:2021 EN IEC 60749-15:2020, IDT; IEC Semiconductor devices - Mechanical pr en,fr 31.080.01 10.99 60749-15:2020, IDT and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices BAS/TC 64 prBAS EN IEC 60749-20:2021 EN IEC 60749-20:2020, IDT; IEC Semiconductor devices - Mechanical pr en,fr 31.080.01 10.99 60749-20:2020, IDT and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat
323 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS EN IEC 60749-30:2021 EN IEC 60749-30:2020, IDT; IEC Semiconductor devices - Mechanical pr en,fr 31.080.01 10.99 60749-30:2020, IDT and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
BAS/TC 64 prBAS EN IEC 60749-41:2021 EN IEC 60749-41:2020, IDT; IEC Semiconductor devices - Mechanical pr en,fr 31.080.01 10.99 60749-41:2020, IDT and climatic test methods - Part 41: Standard reliability testing methods of non-volatile memory devices BAS/TC 64 prBAS EN IEC 61108-5:2021 EN IEC 61108-5:2020, IDT; IEC Maritime navigation and pr en,fr 47.020.70 10.99 61108-5:2020, IDT radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 5: BeiDou navigation satellite system (BDS) - Receiver equipment - Performance requirements, methods of testing and required test results BAS/TC 64 prBAS EN IEC 61123:2021 EN IEC 61123:2020, IDT; IEC Reliability testing - Compliance test pr en,fr 03.120.30, 10.99 61123:2019, IDT plans for success ratio 03.120.01, 21.020 BAS/TC 64 prBAS EN IEC 61162- EN IEC 61162- Maritime navigation and pr en,fr 47.020.70 10.99 460/A1:2021 460:2018/A1:2020, IDT; IEC radiocommunication equipment and 61162-460:2018/AMD1:2020, systems - Digital interfaces - Part 460: IDT Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security BAS/TC 64 prBAS EN IEC 61163-2:2021 EN IEC 61163-2:2020, IDT; IEC Reliability stress screening - Part 2: pr en,fr 31.020, 10.99 61163-2:2020, IDT Components 03.120.01 BAS/TC 64 prBAS EN IEC 61189-5-504:2021 EN IEC 61189-5-504:2020, IDT; Test methods for electrical materials, pr en,fr 31.180 10.99 IEC 61189-5-504:2020, IDT printed board and other interconnection structures and assemblies - Part 5-504: General test methods for materials and assemblies - Process ionic contamination testing (PICT)
324 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS EN IEC 61760-1:2021 EN IEC 61760-1:2020, IDT; IEC Surface mounting technology - Part 1: pr en,fr 31.240 10.99 61760-1:2020, IDT Standard method for the specification of surface mounting components (SMDs)
BAS/TC 64 prBAS EN IEC 61788-26:2021 EN IEC 61788-26:2020, IDT; IEC Superconductivity - Part 26: Critical pr en,fr 19.080, 10.99 61788-26:2020, IDT current measurement - DC critical 17.220.20, current of RE-Ba-Cu-O composite 29.050 superconductors BAS/TC 64 prBAS EN IEC 61788-4:2021 EN IEC 61788-4:2020, IDT; IEC Superconductivity - Part 4: Residual pr en,fr 17.220.20, 10.99 61788-4:2020, IDT resistance ratio measurement - 29.050, Residual resistance ratio of Nb-Ti and 17.200.20 Nb3Sn composite superconductors BAS/TC 64 prBAS EN IEC 61788-7:2021 EN IEC 61788-7:2020, IDT; IEC Superconductivity - Part 7: Electronic pr en,fr 17.220.20, 10.99 61788-7:2020, IDT characteristic measurements - Surface 29.050, resistance of high-temperature 17.220 superconductors at microwave frequencies BAS/TC 64 prBAS EN IEC 61960-4:2021 EN IEC 61960-4:2020, IDT; IEC Secondary cells and batteries containing pr en,fr 29.220.99 10.99 61960-4:2020, IDT alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 4: Coin secondary lithium cells, and batteries made from them BAS/TC 64 prBAS EN IEC 62239-1:2021 EN IEC 62239-1:2018, IDT; IEC Process management for avionics - pr en,fr 49.060, 10.99 62239-1:2018, IDT Management plan - Part 1: Preparation 31.020, and maintenance of an electronic 03.100.50 components management plan BAS/TC 64 prBAS EN IEC 62327:2021 EN IEC 62327:2019, IDT; IEC Radiation protection instrumentation - pr en 13.280 10.99 62327:2017, IDT Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation
BAS/TC 64 prBAS EN IEC 62401:2021 EN IEC 62401:2019, IDT; IEC Radiation protection instrumentation - pr en 13.280 10.99 62401:2017, IDT Alarming personal radiation devices (PRDs) for the detection of illicit trafficking of radioactive material
325 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS EN IEC 62433-1/Cor EN IEC 62433-1:2019/AC:2020- EMC IC modelling - Part 1: General pr en 31.200 10.99 1:2021 07, IDT; IEC 62433- modelling framework 1:2019/COR1:2020, IDT BAS/TC 64 prBAS EN IEC 62435-3:2021 EN IEC 62435-3:2020, IDT; IEC Electronic components - Long-term pr en,fr 31.020 10.99 62435-3:2020, IDT storage of electronic semiconductor devices - Part 3: Data BAS/TC 64 prBAS EN IEC 62435-8:2021 EN IEC 62435-8:2020, IDT; IEC Electronic components - Long-term pr en,fr 31.020 10.99 62435-8:2020, IDT storage of electronic semiconductor devices - Part 8: Passive electronic devices BAS/TC 64 prBAS EN IEC 62668-1:2021 EN IEC 62668-1:2019, IDT; IEC Process management for avionics - pr en,fr 49.060, 10.99 62668-1:2019, IDT Counterfeit prevention - Part 1: Avoiding 31.020, the use of counterfeit, fraudulent and 03.100.50 recycled electronic components
BAS/TC 64 prBAS EN IEC 62668-2:2021 EN IEC 62668-2:2019, IDT; IEC Process management for avionics - pr en,fr 49.060, 10.99 62668-2:2019, IDT Counterfeit prevention - Part 2: 31.020, Managing electronic components from 03.100.50 non-franchised sources BAS/TC 64 prBAS EN IEC 62878-1:2021 EN IEC 62878-1:2019, IDT; IEC Device embedding assembly technology pr en,fr 31.190, 10.99 62878-1:2019, IDT - Part 1: Generic specification for device 31.180 embedded substrates
BAS/TC 64 prBAS EN IEC 62878-2-5:2021 EN IEC 62878-2-5:2019, IDT; Device embedding assembly technology pr en,fr 31.190, 10.99 IEC 62878-2-5:2019, IDT - Part 2-5: Guidelines - Implementation 31.180 of a 3D data format for device embedded substrate BAS/TC 64 prBAS EN IEC 62932-1:2021 EN IEC 62932-1:2020, IDT; IEC Flow battery energy systems for pr en 29.220.99 10.99 62932-1:2020, IDT stationary applications - Part 1: Terminology and general aspects BAS/TC 64 prBAS EN IEC 62932-2-1:2021 EN IEC 62932-2-1:2020, IDT; Flow battery energy systems for pr en 29.220.99 10.99 IEC 62932-2-1:2020, IDT stationary applications - Part 2-1: Performance general requirements and test methods BAS/TC 64 prBAS EN IEC 62932-2-2:2021 EN IEC 62932-2-2:2020, IDT; Flow battery energy systems for pr en 29.220.99 10.99 IEC 62932-2-2:2020, IDT stationary applications - Part 2-2: Safety requirements
326 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS EN IEC 62933-5-2:2021 EN IEC 62933-5-2:2020, IDT; Electrical energy storage (EES) systems pr en,fr 13.020.30 10.99 IEC 62933-5-2:2020, IDT - Part 5-2: Safety requirements for grid- integrated EES systems - Electrochemical-based systems
BAS/TC 64 prBAS EN IEC 62960:2021 EN IEC 62960:2020, IDT; IEC Dependability reviews during the life pr en,fr 03.120.01 10.99 62960:2020, IDT cycle BAS/TC 64 prBAS EN IEC 62962:2021 EN IEC 62962:2019, IDT; IEC Particular requirements for load- pr en,fr 27.015, 10.99 62962:2019, IDT shedding equipment (LSE) 29.020 BAS/TC 64 prBAS EN IEC 62984-1:2021 EN IEC 62984-1:2020, IDT; IEC High-temperature secondary batteries - pr en,fr 29.220.20 10.99 62984-1:2020, IDT Part 1: General requirements BAS/TC 64 prBAS EN IEC 62984-2:2021 EN IEC 62984-2:2020, IDT; IEC High-temperature secondary batteries - pr en,fr 29.220.20 10.99 62984-2:2020, IDT Part 2: Safety requirements and tests BAS/TC 64 prBAS EN IEC 62984-3:2021 EN IEC 62984-3:2020, IDT; IEC High-temperature secondary batteries - pr en,fr 29.220.20 10.99 62984-3:2020, IDT Part 3: Sodium-based batteries - Performance requirements and tests BAS/TC 64 prBAS EN IEC 63009:2021 EN IEC 63009:2019, IDT; IEC Ultrasonics - Physiotherapy systems - pr en,fr 11.040.60, 10.99 63009:2019, IDT Field specifications and methods of 17.140.50 measurement in the frequency range 20 kHz to 500 kHz BAS/TC 64 prBAS EN IEC 63045:2021 EN IEC 63045:2020, IDT; IEC Ultrasonics - Non-focusing short pr en 17.140.50 10.99 63045:2020, IDT pressure pulse sources including ballistic pressure pulse sources - Characteristics of fields BAS/TC 64 prBAS EN IEC 63056:2021 EN IEC 63056:2020, IDT; IEC Secondary cells and batteries containing pr en,fr 29.220.30 10.99 63056:2020, IDT alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems
BAS/TC 64 prBAS EN IEC 63057:2021 EN IEC 63057:2020, IDT; IEC Secondary cells and batteries containing pr en,fr 29.220.30 10.99 63057:2020, IDT alkaline or other non-acid electrolytes - Safety requirements for secondary lithium batteries for use in road vehicles not for the propulsion
327 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS EN IEC 63067:2021 EN IEC 63067:2020, IDT; IEC Electrical installations for lighting and pr en,fr 93.120, 10.99 63067:2020, IDT beaconing of aerodromes - Connecting 29.140.50 devices - General requirements and tests BAS/TC 64 prBAS EN IEC 63115-1:2021 EN IEC 63115-1:2020, IDT; IEC Secondary cells and batteries containing pr en,fr 29.220.30 10.99 63115-1:2020, IDT alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performance
BAS/TC 64 prBAS IEC 60412:2021 IEC 60412:2014, IDT Nuclear instrumentation - Nomenclature pr en,fr 27.120.01, 10.99 (identification) of scintillators and 27.120 scintillation detectors and standard dimensions of scintillators
BAS/TC 64 prBAS IEC 60744:2021 IEC 60744:2018, IDT Nuclear power plants - Instrumentation pr en,fr 21.120.20 10.99 and control systems important to safety - Safety logic assemblies used in systems performing category A functions: Characteristics and test methods
BAS/TC 64 prBAS IEC 60772:2021 IEC 60772:2018, IDT Nuclear power plants - Instrumentation pr en,fr 27.120.20 10.99 systems important to safety - Electrical penetration assemblies in containment structures BAS/TC 64 prBAS IEC 60860:2021 IEC 60860:2014, IDT Radiation protection instrumentation - pr en,fr 13.280 10.99 Warning equipment for criticality accidents BAS/TC 64 prBAS IEC 61017:2021 IEC 61017:2016, IDT Radiation protection instrumentation - pr en,fr 13.280 10.99 Transportable, mobile or installed equipment to measure photon radiation for environmental monitoring BAS/TC 64 prBAS IEC 61504:2021 IEC 61504:2017, IDT Nuclear facilities - Instrumentation and pr en,fr 27.120.20 10.99 control systems important to safety - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity
328 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS IEC 62671:2021 IEC 62671:2013, IDT Nuclear power plants - Instrumentation pr en,fr 27.120.20 10.99 and control important to safety - Selection and use of industrial digital devices of limited functionality BAS/TC 64 prBAS IEC 62705:2021 IEC 62705:2014, IDT Nuclear power plants - Instrumentation pr en,fr 27.120.20 10.99 and control important to safety - Radiation monitoring systems (RMS): Characteristics and lifecycle BAS/TC 64 prBAS IEC 62765-2:2021 IEC 62765-2:2019, IDT Nuclear power plants - Instrumentation pr en,fr 27.120.20 10.99 and control important to safety - Management of ageing of sensors and transmitters - Part 2: Temperature sensors BAS/TC 64 prBAS IEC 62855:2021 IEC 62855:2016, IDT Nuclear power plants - Electrical power pr en,fr 27.120.20 10.99 systems - Electrical power systems analysis BAS/TC 64 prBAS IEC 62887:2021 IEC 62887:2018, IDT Nuclear power plants - Instrumentation pr en,fr 27.120.20 10.99 systems important to safety - Pressure transmitters: Characteristics and test methods BAS/TC 64 prBAS IEC 62954:2021 IEC 62954:2019, IDT Nuclear power plants - Control rooms - pr en,fr 27.120.20 10.99 Requirements for emergency response facilities BAS/TC 64 prBAS IEC 62957-1:2021 IEC 62957-1:2017, IDT Radiation protection instrumentation - pr en,fr 13.280 10.99 Semi-empirical method for performance evaluation of detection and radionuclide identification - Part 1: Performance evaluation of the instruments, featuring radionuclide identification in static mode
BAS/TC 64 prBAS IEC 62988:2021 IEC 62988:2018, IDT Nuclear power plants - Instrumentation pr en,fr 27.120.20 10.99 and control systems important to safety - Selection and use of wireless devices
BAS/TC 64 prBAS IEC 63147:2021 IEC 63147:2017, IDT Criteria for accident monitoring pr en 27.120.20 10.99 instrumentation for nuclear power generating stations
329 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS IEC TR 61577-5:2021 IEC TR 61577-5:2019, IDT Radiation protection instrumentation - pr en 13.280 10.99 Radon and radon decay product measuring instruments - Part 5: General properties of radon and radon decay products and their measurement methods BAS/TC 64 prBAS IEC TR 62918:2021 IEC TR 62918:2014, IDT Nuclear power plants - Instrumentation pr en 27.120.20 10.99 and control important to safety - Use and selection of wireless devices to be integrated in systems important to safety
BAS/TC 64 prBAS IEC TR 62971:2021 IEC TR 62971:2015, IDT Radiation instrumentation - Radiation pr en 13.280 10.99 sources used in illicit trafficking detection standards - Guidance and recommendations BAS/TC 64 prBAS IEC TR 62987:2021 IEC TR 62987:2015, IDT Nuclear power plants - Instrumentation pr en 27.120.20 10.99 and control systems important to safety - Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems
BAS/TC 64 prBAS IEC TR 63084:2021 IEC TR 63084:2017, IDT Nuclear power plants - Instrumentation pr en 27.120.20 10.99 and control important to safety - Platform qualification for systems important to safety BAS/TC 64 prBAS IEC TR 63123:2021 IEC TR 63123:2017, IDT Nuclear power plants - Instrumentation, pr en 27.120.20 10.99 control and electrical power systems - Guidance for the application of IEC 63147:2017/IEEE Std 497™ -2016 in the IAEA / IEC framework
BAS/TC 64 prBAS IEC TR 63192:2021 IEC TR 63192:2019, IDT Nuclear power plants - Instrumentation pr en 27.160 10.99 and control systems important to safety - Hazard analysis: A review of current approaches BAS/TC 64 prBAS IEC TS 63050:2021 IEC TS 63050:2019, IDT Radiation protection instrumentation - pr en 13.280 10.99 Dosemeters for pulsed fields of ionizing radiation
330 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 64 prBAS IEC/IEEE 62582-5:2021 IEC/IEEE 62582-5:2015, IDT Nuclear power plants - Instrumentation pr en,fr 27.120.20 10.99 and control important to safety - Electrical equipment condition monitoring methods - Part 5: Optical time domain reflectometry BAS/TC 64 prBAS IEC/IEEE 62582-6:2021 IEC/IEEE 62582-6:2019, IDT Nuclear power plants - Instrumentation pr en,fr 27.120.20 10.99 and control important to safety - Electrical equipment condition monitoring methods - Part 6: Insulation resistance BAS/TC 65 prBAS EN 300 089 V2.1.1:2021 EN 300 089 V2.1.1:2000, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Calling Line Identification Presentation (CLIP) supplementary service; Service description BAS/TC 65 prBAS EN 300 147 V1.4.1:2021 EN 300 147 V1.4.1:2001, IDT Transmission and Multiplexing (TM); pr en 10.99 Synchronous Digital Hierarchy (SDH); Multiplexing structure BAS/TC 65 prBAS EN 300 175-1 V1.5.1:2021 EN 300 175-1 V1.5.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 1: Overview
BAS/TC 65 prBAS EN 300 175-1 V1.6.1:2021 EN 300 175-1 V1.6.1:2002, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 1: Overview
BAS/TC 65 prBAS EN 300 175-1 V1.7.1:2021 EN 300 175-1 V1.7.1:2003, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 1: Overview
BAS/TC 65 prBAS EN 300 175-1 V1.8.1:2021 EN 300 175-1 V1.8.1:2004, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 1: Overview
BAS/TC 65 prBAS EN 300 175-1 V1.9.1:2021 EN 300 175-1 V1.9.1:2005, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 1: Overview
331 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 175-1 V2.8.1:2021 EN 300 175-1 V2.8.1:2019, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 1: Overview
BAS/TC 65 prBAS EN 300 175-2 V1.5.1:2021 EN 300 175-2 V1.5.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL) BAS/TC 65 prBAS EN 300 175-2 V1.6.1:2021 EN 300 175-2 V1.6.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL) BAS/TC 65 prBAS EN 300 175-2 V1.7.1:2021 EN 300 175-2 V1.7.1:2003, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL) BAS/TC 65 prBAS EN 300 175-2 V1.8.1:2021 EN 300 175-2 V1.8.1:2004, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL) BAS/TC 65 prBAS EN 300 175-2 V1.9.1:2021 EN 300 175-2 V1.9.1:2005, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL) BAS/TC 65 prBAS EN 300 175-2 V2.8.1:2021 EN 300 175-2 V2.8.1:2019, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL) BAS/TC 65 prBAS EN 300 175-3 V1.4.2:2021 EN 300 175-3 V1.4.2:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) Layer BAS/TC 65 prBAS EN 300 175-3 V1.5.1:2021 EN 300 175-3 V1.5.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer
332 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 175-3 V1.6.1:2021 EN 300 175-3 V1.6.1:2002, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer BAS/TC 65 prBAS EN 300 175-3 V1.8.1:2021 EN 300 175-3 V1.8.1:2004, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer BAS/TC 65 prBAS EN 300 175-3 V1.9.1:2021 EN 300 175-3 V1.9.1:2005, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer BAS/TC 65 prBAS EN 300 175-3 V2.8.1:2021 EN 300 175-3 V2.8.1:2019, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer BAS/TC 65 prBAS EN 300 175-4 V1.4.2:2021 EN 300 175-4 V1.4.2:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) Layer BAS/TC 65 prBAS EN 300 175-4 V1.5.1:2021 EN 300 175-4 V1.5.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer BAS/TC 65 prBAS EN 300 175-4 V1.6.1:2021 EN 300 175-4 V1.6.1:2002, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer BAS/TC 65 prBAS EN 300 175-4 V1.8.1:2021 EN 300 175-4 V1.8.1:2004, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer BAS/TC 65 prBAS EN 300 175-4 V1.9.1:2021 EN 300 175-4 V1.9.1:2005, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer
333 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 175-4 V2.2.1:2021 EN 300 175-4 V2.2.1:2008, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer BAS/TC 65 prBAS EN 300 175-4 V2.8.1:2021 EN 300 175-4 V2.8.1:2019, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer BAS/TC 65 prBAS EN 300 175-5 V1.4.2:2021 EN 300 175-5 V1.4.2:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) Layer BAS/TC 65 prBAS EN 300 175-5 V1.5.1:2021 EN 300 175-5 V1.5.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer BAS/TC 65 prBAS EN 300 175-5 V1.6.1:2021 EN 300 175-5 V1.6.1:2002, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer BAS/TC 65 prBAS EN 300 175-5 V1.8.1:2021 EN 300 175-5 V1.8.1:2004, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer BAS/TC 65 prBAS EN 300 175-5 V1.9.1:2021 EN 300 175-5 V1.9.1:2005, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer BAS/TC 65 prBAS EN 300 175-5 V2.8.1:2021 EN 300 175-5 V2.8.1:2019, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer BAS/TC 65 prBAS EN 300 175-6 V1.5.1:2021 EN 300 175-6 V1.5.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing
334 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 175-6 V1.6.1:2021 EN 300 175-6 V1.6.1:2002, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing BAS/TC 65 prBAS EN 300 175-6 V1.7.1:2021 EN 300 175-6 V1.7.1:2003, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing BAS/TC 65 prBAS EN 300 175-6 V1.8.1:2021 EN 300 175-6 V1.8.1:2004, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing BAS/TC 65 prBAS EN 300 175-6 V1.9.1:2021 EN 300 175-6 V1.9.1:2005, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing BAS/TC 65 prBAS EN 300 175-6 V2.8.1:2021 EN 300 175-6 V2.8.1:2019, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing BAS/TC 65 prBAS EN 300 175-7 V1.5.1:2021 EN 300 175-7 V1.5.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 7: Security features
BAS/TC 65 prBAS EN 300 175-7 V1.6.1:2021 EN 300 175-7 V1.6.1:2002, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 7: Security features
BAS/TC 65 prBAS EN 300 175-7 V1.7.1:2021 EN 300 175-7 V1.7.1:2003, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 7: Security features
BAS/TC 65 prBAS EN 300 175-7 V1.8.1:2021 EN 300 175-7 V1.8.1:2004, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 7: Security features
335 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 175-7 V1.9.1:2021 EN 300 175-7 V1.9.1:2005, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 7: Security features
BAS/TC 65 prBAS EN 300 175-7 V2.8.1:2021 EN 300 175-7 V2.8.1:2019, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 7: Security features
BAS/TC 65 prBAS EN 300 175-8 V1.5.1:2021 EN 300 175-8 V1.5.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission BAS/TC 65 prBAS EN 300 175-8 V1.6.1:2021 EN 300 175-8 V1.6.1:2002, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission BAS/TC 65 prBAS EN 300 175-8 V1.7.1:2021 EN 300 175-8 V1.7.1:2003, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission BAS/TC 65 prBAS EN 300 175-8 V1.8.1:2021 EN 300 175-8 V1.8.1:2004, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission BAS/TC 65 prBAS EN 300 175-8 V1.9.1:2021 EN 300 175-8 V1.9.1:2005, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission BAS/TC 65 prBAS EN 300 175-8 V2.8.1:2021 EN 300 175-8 V2.8.1:2019, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Common Interface (CI); Part 8: Speech and audio coding and transmission BAS/TC 65 prBAS EN 300 176-1 V1.3.2:2021 EN 300 176-1 V1.3.2:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Approval test specification; Part 1: Radio BAS/TC 65 prBAS EN 300 176-1 V2.3.1:2021 EN 300 176-1 V2.3.1:2018, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Test specification; Part 1: Radio
336 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 176-2 V1.3.2:2021 EN 300 176-2 V1.3.2:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Approval test specification; Part 2: Speech BAS/TC 65 prBAS EN 300 176-2 V2.3.1:2021 EN 300 176-2 V2.3.1:2019, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Test specification; Part 2: Audio and speech
BAS/TC 65 prBAS EN 300 195-1 V2.1.1:2021 EN 300 195-1 V2.1.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Supplementary service interactions; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification BAS/TC 65 prBAS EN 300 195-2 V2.1.1:2021 EN 300 195-2 V2.1.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Supplementary service interactions; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
BAS/TC 65 prBAS EN 300 207-6 V3.1.1:2021 EN 300 207-6 V3.1.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Diversion supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network BAS/TC 65 prBAS EN 300 299 V1.3.1:2021 EN 300 299 V1.3.1:1999, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Cell based user network access for 155 520 kbit/s and 622 080 kbit/s; Physical layer interfaces for B-ISDN applications BAS/TC 65 prBAS EN 300 324-1 V2.1.1:2021 EN 300 324-1 V2.1.1:2000, IDT V interfaces at the digital Local pr en 10.99 Exchange (LE); V5.1 interface for the support of Access Network (AN); Part 1: V5.1 interface specification
337 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 324-2 V2.1.1:2021 EN 300 324-2 V2.1.1:2000, IDT V interfaces at the digital Local pr en 10.99 Exchange (LE); V5.1 interface for the support of Access Network (AN); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
BAS/TC 65 prBAS EN 300 324-3 V3.1.1:2021 EN 300 324-3 V3.1.1:2001, IDT V interfaces at the digital Local pr en 10.99 Exchange (LE); V5.1 interface for the support of Access Network (AN); Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the network layer (AN side) BAS/TC 65 prBAS EN 300 356-36 EN 300 356-36 V3.2.2:2001, IDT Integrated Services Digital Network pr en 10.99 V3.2.2:2021 (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 36: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for supplementary services
BAS/TC 65 prBAS EN 300 403-3 V1.3.1:2021 EN 300 403-3 V1.3.1:2000, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 3: Protocol Implementation Conformance Statement (PICS) proforma specification
BAS/TC 65 prBAS EN 300 417-1-1 EN 300 417-1-1 V1.1.2:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.2:2021 Generic requirements of transport functionality of equipment; Part 1-1: Generic processes and performance
338 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 417-1-2 EN 300 417-1-2 V1.1.2:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.2:2021 Generic requirements of transport functionality of equipment; Part 1-2: General information about Implementation Conformance Statement (ICS) proforma BAS/TC 65 prBAS EN 300 417-2-1 EN 300 417-2-1 V1.1.2:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.2:2021 Generic requirements of transport functionality of equipment; Part 2-1: Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section layer functions BAS/TC 65 prBAS EN 300 417-2-2 EN 300 417-2-2 V1.1.2:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.2:2021 Generic requirements of transport functionality of equipment; Part 2-2: Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section layer functions; Implementation Conformance Statement (ICS) proforma specification
BAS/TC 65 prBAS EN 300 417-2-2 EN 300 417-2-2 V1.1.3:1999, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.3:2021 Generic requirements of transport functionality of equipment; Part 2-2: Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section layer functions; Implementation Conformance Statement (ICS) proforma specification
BAS/TC 65 prBAS EN 300 417-3-1 EN 300 417-3-1 V1.1.2:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.2:2021 Generic requirements of transport functionality of equipment; Part 3-1: Synchronous Transport Module-N (STM- N) regenerator and multiplex section layer functions
339 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 417-3-2 EN 300 417-3-2 V1.1.2:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.2:2021 Generic requirements of transport functionality of equipment; Part 3-2: Synchronous Transport Module-N (STM- N) regenerator and multiplex section layer functions; Implementation Conformance Statement (ICS) proforma specification BAS/TC 65 prBAS EN 300 417-3-2 EN 300 417-3-2 V1.1.3:1999, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.3:2021 Generic requirements of transport functionality of equipment; Part 3-2: Synchronous Transport Module-N (STM- N) regenerator and multiplex section layer functions; Implementation Conformance Statement (ICS) proforma specification BAS/TC 65 prBAS EN 300 417-4-1 EN 300 417-4-1 V1.1.2:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.2:2021 Generic requirements of transport functionality of equipment; Part 4-1: Synchronous Digital Hierarchy (SDH) path layer functions BAS/TC 65 prBAS EN 300 417-5-1 EN 300 417-5-1 V1.1.2:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.2:2021 Generic requirements of transport functionality of equipment; Part 5-1: Plesiochronous Digital Hierarchy (PDH) path layer functions BAS/TC 65 prBAS EN 300 417-6-1 EN 300 417-6-1 V1.1.2:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.2:2021 Generic requirements of transport functionality of equipment; Part 6-1: Synchronization layer functions BAS/TC 65 prBAS EN 300 443-5 V1.2.1:2021 EN 300 443-5 V1.2.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
340 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 443-6 V1.2.1:2021 EN 300 443-6 V1.2.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network BAS/TC 65 prBAS EN 300 444 V1.2.2:2021 EN 300 444 V1.2.2:1997, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Generic Access Profile (GAP) BAS/TC 65 prBAS EN 300 444 V1.4.2:2021 EN 300 444 V1.4.2:2003, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Generic Access Profile (GAP) BAS/TC 65 prBAS EN 300 462-2-1 EN 300 462-2-1 V1.1.1:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.1:2021 Generic requirements for synchronization networks; Part 2-1: Synchronization network architecture BAS/TC 65 prBAS EN 300 494-1 V1.2.1:2021 EN 300 494-1 V1.2.1:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 1: Summary BAS/TC 65 prBAS EN 300 494-1 V1.3.1:2021 EN 300 494-1 V1.3.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 1: Summary BAS/TC 65 prBAS EN 300 494-2 V1.2.1:2021 EN 300 494-2 V1.2.1:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS) - Portable radio Termination (PT)
341 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 300 494-2 V1.3.1:2021 EN 300 494-2 V1.3.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS) - Portable radio Termination (PT) BAS/TC 65 prBAS EN 300 494-3 V1.3.1:2021 EN 300 494-3 V1.3.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT) BAS/TC 65 prBAS EN 300 632 V1.2.1:2021 EN 300 632 V1.2.1:2002, IDT Transmission and Multiplexing (TM); pr en 10.99 Fixed radio link equipment for the transmission of analogue video signals operating in the frequency bands 24,25 GHz to 29,50 GHz and 31,0 GHz to 31,8 GHz BAS/TC 65 prBAS EN 300 700 V2.2.1:2021 EN 300 700 V2.2.1:2018, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Wireless Relay Station (WRS) BAS/TC 65 prBAS EN 300 824 V1.2.2:2021 EN 300 824 V1.2.2:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Cordless Terminal Mobility (CTM); CTM Access Profile (CAP) BAS/TC 65 prBAS EN 301 002-1 V1.3.1:2021 EN 301 002-1 V1.3.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification BAS/TC 65 prBAS EN 301 002-2 V1.3.1:2021 EN 301 002-2 V1.3.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
342 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 002-3 V1.2.1:2021 EN 301 002-3 V1.2.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user BAS/TC 65 prBAS EN 301 002-4 V1.2.1:2021 EN 301 002-4 V1.2.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user BAS/TC 65 prBAS EN 301 002-5 V1.2.1:2021 EN 301 002-5 V1.2.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network BAS/TC 65 prBAS EN 301 002-6 V1.2.1:2021 EN 301 002-6 V1.2.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
343 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 003-3 V1.2.1:2021 EN 301 003-3 V1.2.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user BAS/TC 65 prBAS EN 301 003-4 V1.2.1:2021 EN 301 003-4 V1.2.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user BAS/TC 65 prBAS EN 301 003-5 V1.2.1:2021 EN 301 003-5 V1.2.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
BAS/TC 65 prBAS EN 301 003-6 V1.2.1:2021 EN 301 003-6 V1.2.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
344 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 062-2 V1.1.1:2021 EN 301 062-2 V1.1.1:2000, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Signalling System No.7; Support of Virtual Private Network (VPN) applications with Private network Q reference point Signalling System number 1 (PSS1) information flows; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification BAS/TC 65 prBAS EN 301 062-4 V1.1.1:2021 EN 301 062-4 V1.1.1:2000, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Signalling System No.7 (SS7); Support of Virtual Private Network (VPN) applications with Private network Q reference point Signalling System number 1 (PSS1) information flows; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification BAS/TC 65 prBAS EN 301 067-3 V1.2.1:2021 EN 301 067-3 V1.2.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user BAS/TC 65 prBAS EN 301 067-4 V2.1.1:2021 EN 301 067-4 V2.1.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementations eXtra Information for Testing (PIXIT) proforma specification for the user
345 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 067-5 V1.2.1:2021 EN 301 067-5 V1.2.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
BAS/TC 65 prBAS EN 301 067-6 V2.1.1:2021 EN 301 067-6 V2.1.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network BAS/TC 65 prBAS EN 301 068-4 V1.1.1:2021 EN 301 068-4 V1.1.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM transfer capability and traffic parameter indication; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
346 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 068-6 V1.1.1:2021 EN 301 068-6 V1.1.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM transfer capability and traffic parameter indication; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network BAS/TC 65 prBAS EN 301 070-4 V1.1.2:2021 EN 301 070-4 V1.1.2:2000, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification
BAS/TC 65 prBAS EN 301 082 V2.1.1:2021 EN 301 082 V2.1.1:2000, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Outgoing Call Barring-Fixed (OCB-F) supplementary service; Service description BAS/TC 65 prBAS EN 301 126-1 V1.1.2:2021 EN 301 126-1 V1.1.2:1999, IDT Fixed Radio Systems; Conformance pr en 10.99 testing; Part 1: Point-to-point equipment - Definitions, general requirements and test procedures BAS/TC 65 prBAS EN 301 126-2-1 EN 301 126-2-1 V1.1.1:2000, IDT Fixed Radio Systems; Conformance pr en 10.99 V1.1.1:2021 testing; Part 2-1: Point-to-Multipoint equipment; Definitions and general requirements BAS/TC 65 prBAS EN 301 126-2-2 EN 301 126-2-2 V1.1.1:2000, IDT Fixed Radio Systems; Conformance pr en 10.99 V1.1.1:2021 testing; Part 2-2: Point-to-Multipoint equipment; Test procedures for FDMA systems
347 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 126-2-3 EN 301 126-2-3 V1.1.1:2000, IDT Fixed Radio Systems; Conformance pr en 10.99 V1.1.1:2021 testing; Part 2-3: Point-to-Multipoint equipment; Test procedures for TDMA systems BAS/TC 65 prBAS EN 301 126-2-4 EN 301 126-2-4 V1.1.1:2000, IDT Fixed Radio Systems; Conformance pr en 10.99 V1.1.1:2021 testing; Part 2-4: Point-to-Multipoint equipment; Test procedures for FH- CDMA systems BAS/TC 65 prBAS EN 301 126-2-5 EN 301 126-2-5 V1.1.1:2000, IDT Fixed Radio Systems; Conformance pr en 10.99 V1.1.1:2021 testing; Part 2-5: Point-to-Multipoint equipment; Test procedures for DS- CDMA systems BAS/TC 65 prBAS EN 301 126-3-1 EN 301 126-3-1 V1.1.1:2000, IDT Fixed Radio Systems; Conformance pr en 10.99 V1.1.1:2021 testing; Part 3-1: Point-to-Point antennas; Definitions, general requirements and test procedures BAS/TC 65 prBAS EN 301 126-3-2 EN 301 126-3-2 V1.1.1:2001, IDT Fixed Radio Systems; Conformance pr en 10.99 V1.1.1:2021 testing; Part 3-2: Point-to-Multipoint antennas - Definitions, general requirements and test procedures BAS/TC 65 prBAS EN 301 129 V1.1.1:2021 EN 301 129 V1.1.1:1998, IDT Transmission and Multiplexing (TM); pr en 10.99 Digital Radio Relay Systems (DRRS); Synchronous Digital Hierarchy (SDH); System performance monitoring parameters of SDH DRRS BAS/TC 65 prBAS EN 301 129 V1.1.2:2021 EN 301 129 V1.1.2:1999, IDT Transmission and Multiplexing (TM); pr en 10.99 Digital Radio Relay Systems (DRRS); Synchronous Digital Hierarchy (SDH); System performance monitoring parameters of SDH DRRS BAS/TC 65 prBAS EN 301 141-1 V2.1.1:2021 EN 301 141-1 V2.1.1:2000, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Narrowband Multi-service Delivery System (NMDS); Part 1: NMDS interface specification
348 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 141-2 V1.3.1:2021 EN 301 141-2 V1.3.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Narrowband Multi-service Delivery System (NMDS); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
BAS/TC 65 prBAS EN 301 144-6 V1.1.1:2021 EN 301 144-6 V1.1.1:2000, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Digital Subscriber Signalling System No. one (DSS1) and Signalling System No.7 (SS7) protocols; Signalling application for the mobility management service on the alpha interface; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
BAS/TC 65 prBAS EN 301 163-1-1 EN 301 163-1-1 V1.1.1:1999, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.1:2021 Generic requirements of Asynchronous Transfer Mode (ATM) transport functionality within equipment; Part 1-1: Functional characteristics and equipment performance
BAS/TC 65 prBAS EN 301 163-2-1 EN 301 163-2-1 V1.1.2:1999, IDT Transmission and Multiplexing (TM); pr en 10.99 V1.1.2:2021 Generic requirements of Asynchronous Transfer Mode (ATM) transport functionality within equipment; Part 2-1: Functional model for the transfer and layer management plane
BAS/TC 65 prBAS EN 301 164 V1.1.1:2021 EN 301 164 V1.1.1:1999, IDT Transmission and Multiplexing (TM); pr en 10.99 Synchronous Digital Hierarchy (SDH); SDH leased lines; Connection characteristics
349 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 165 V1.1.1:2021 EN 301 165 V1.1.1:1999, IDT Transmission and Multiplexing (TM); pr en 10.99 Synchronous Digital Hierarchy (SDH); SDH leased lines; Network and terminal interface presentation BAS/TC 65 prBAS EN 301 165 V1.1.2:2021 EN 301 165 V1.1.2:2000, IDT Transmission and Multiplexing (TM); pr en 10.99 Synchronous Digital Hierarchy (SDH); SDH leased lines; Connection Characteristics BAS/TC 65 prBAS EN 301 215-3 V1.1.1:2021 EN 301 215-3 V1.1.1:2001, IDT Fixed Radio Systems; Point to Multipoint pr en 10.99 Antennas; Antennas for point-to- multipoint fixed radio systems in the 11 GHz to 60 GHz band; Part 3: Multipoint Multimedia Wireless System in 40,5 GHz to 43,5 GHz BAS/TC 65 prBAS EN 301 217-3 V1.1.1:2021 EN 301 217-3 V1.1.1:2001, IDT V interfaces at the digital Service Node pr en 10.99 (SN); Interfaces at the VB5.2 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs); Part 3: Test Suite Structure and Test Purposes (TSS&TPP) BAS/TC 65 prBAS EN 301 217-4 V1.1.1:2021 EN 301 217-4 V1.1.1:2001, IDT V interfaces at the digital Service Node pr en 10.99 (SN); Interfaces at the VB5.2 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs); Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) BAS/TC 65 prBAS EN 301 238 V1.1.3:2021 EN 301 238 V1.1.3:1998, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services with roaming mobility (service type D, mobility class 2)
350 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 238 V1.2.3:2021 EN 301 238 V1.2.3:2000, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services with roaming mobility (service type D, mobility class 2) BAS/TC 65 prBAS EN 301 239 V1.1.3:2021 EN 301 239 V1.1.3:1998, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services for closed user groups (service type D, mobility class 1) BAS/TC 65 prBAS EN 301 241-1 V1.1.1:2021 EN 301 241-1 V1.1.1:1998, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementation Conformance Statement (ICS); Part 1: Portable radio Termination (PT) BAS/TC 65 prBAS EN 301 241-2 V1.1.1:2021 EN 301 241-2 V1.1.1:1998, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementation Conformance Statement (ICS); Part 2: Fixed radio Termination (FT) BAS/TC 65 prBAS EN 301 242 V1.1.3:2021 EN 301 242 V1.1.3:1998, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM integration based on dual-mode terminals BAS/TC 65 prBAS EN 301 242 V1.2.2:2021 EN 301 242 V1.2.2:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM integration based on dual-mode terminals
351 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 276-3 V1.1.1:2021 EN 301 276-3 V1.1.1:2001, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Modification procedures for sustainable cell rate parameters; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
BAS/TC 65 prBAS EN 301 276-5 V1.1.1:2021 EN 301 276-5 V1.1.1:2001, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Modification procedures for sustainable cell rate parameters; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
BAS/TC 65 prBAS EN 301 361-1 V1.1.1:2021 EN 301 361-1 V1.1.1:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Integrated Services Digital Network (ISDN); ISDN Mobility protocol Interworking specification Profile (IMIP); Part 1: DECT/ISDN interworking for Cordless Terminal Mobility (CTM) support
BAS/TC 65 prBAS EN 301 361-2 V1.1.1:2021 EN 301 361-2 V1.1.1:2000, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Integrated Services Digital Network (ISDN); ISDN Mobility protocol Interworking specification Profile (IMIP); Part 2: DECT/ISDN interworking for Global System for Mobile communications (GSM) support
352 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 371-1 V0.0.1:2021 EN 301 371-1 V0.0.1:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Cordless Terminal Mobility (CTM); CTM Access Profile (CAP); Profile Test Specification (PTS); Part 1: Summary BAS/TC 65 prBAS EN 301 371-2 V0.0.1:2021 EN 301 371-2 V0.0.1:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Cordless Terminal Mobility (CTM); CTM Access Profile (CAP); Profile Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS) - Portable radio Termination (PT)
BAS/TC 65 prBAS EN 301 371-3 V0.0.3:2021 EN 301 371-3 V0.0.3:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Cordless Terminal Mobility (CTM); CTM Access Profile (CAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT) BAS/TC 65 prBAS EN 301 390 V1.1.1:2021 EN 301 390 V1.1.1:2000, IDT Fixed Radio Systems; Point-to-point and pr en 10.99 Point-to-Multipoint Systems; Spurious emissions and receiver immunity at equipment/antenna port of Digital Fixed Radio Systems BAS/TC 65 prBAS EN 301 390 V1.2.1:2021 EN 301 390 V1.2.1:2003, IDT Fixed Radio Systems; Point-to-point and pr en 10.99 Multipoint Systems; Spurious emissions and receiver immunity limits at equipment/antenna port of Digital Fixed Radio Systems BAS/TC 65 prBAS EN 301 406 V1.4.1:2021 EN 301 406 V1.4.1:2001, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Harmonized EN for Digital Enhanced Cordless Telecommunications (DECT) covering essential requirements under article 3.2 of the R&TTE Directive; Generic radio
353 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 439 V1.1.1:2021 EN 301 439 V1.1.1:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Global System for Mobile communications (GSM); Attachment requirements for DECT/GSM dual-mode terminal equipment BAS/TC 65 prBAS EN 301 440 V1.2.2:2021 EN 301 440 V1.2.2:1999, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); Integrated Services Digital Network (ISDN); Attachment requirements for terminal equipment for DECT/ISDN interworking profile applications BAS/TC 65 prBAS EN 301 451-2 V1.3.1:2021 EN 301 451-2 V1.3.1:2000, IDT Private Integrated Services Network pr en 10.99 (PISN); Cordless Terminal Mobility (CTM); Inter-exchange signalling protocol; Cordless terminal outgoing call additional network feature for the VPN b service entry point; Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma BAS/TC 65 prBAS EN 301 452-2 V1.3.1:2021 EN 301 452-2 V1.3.1:2000, IDT Private Integrated Services Network pr en 10.99 (PISN); Inter-exchange signalling protocol; Call completion supplementary service for the VPN b service entry point; Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma BAS/TC 65 prBAS EN 301 453-2 V1.1.1:2021 EN 301 453-2 V1.1.1:2000, IDT Private Integrated Services Network pr en 10.99 (PISN); Inter-exchange signalling protocol; Diversion supplementary services [ISO/IEC 13873 (1995) modified]; Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma
354 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 454-2 V1.2.2:2021 EN 301 454-2 V1.2.2:2000, IDT Private Integrated Services Network pr en 10.99 (PISN); Inter-exchange signalling protocol; Cordless Terminal Location Registration (CTLR) supplementary service; ECMA-QSIG-CTLR; Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma BAS/TC 65 prBAS EN 301 455-2 V1.3.1:2021 EN 301 455-2 V1.3.1:2000, IDT Private Integrated Services Network pr en 10.99 (PISN); Inter-exchange signalling protocol; Cordless Terminal Mobility (CTM); Incoming call additional network feature for the VPN b service entry point; Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma BAS/TC 65 prBAS EN 301 483-2 V1.1.1:2021 EN 301 483-2 V1.1.1:2000, IDT Private Integrated Services Network pr en 10.99 (PISN); Inter-exchange signalling protocol; Advice of Charge (AoC) supplementary services [ISO/IEC 15049 (1997), modified]; Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma
BAS/TC 65 prBAS EN 301 490-2 V1.1.1:2021 EN 301 490-2 V1.1.1:2000, IDT Private Integrated Services Network pr en 10.99 (PISN); Inter-exchange signalling protocol; Call transfer supplementary service for the VPN b service entry point; Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification
355 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 301 491-2 V1.1.1:2021 EN 301 491-2 V1.1.1:2000, IDT Private Integrated Services Network pr en 10.99 (PISN); Inter-exchange signalling protocol; Call offer supplementary service; Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma BAS/TC 65 prBAS EN 301 492-2 V1.1.1:2021 EN 301 492-2 V1.1.1:2000, IDT Private Integrated Services Network pr en 10.99 (PISN); Inter-exchange signalling protocol; Cordless terminal authentication supplementary services; Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the VPN b service entry point
BAS/TC 65 prBAS EN 301 649 V1.1.1:2021 EN 301 649 V1.1.1:2000, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); DECT Packet Radio Service (DPRS) BAS/TC 65 prBAS EN 301 649 V1.4.1:2021 EN 301 649 V1.4.1:2004, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); DECT Packet Radio Service (DPRS) BAS/TC 65 prBAS EN 301 650 V1.1.1:2021 EN 301 650 V1.1.1:2000, IDT Digital Enhanced Cordless pr en 10.99 Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP) BAS/TC 65 prBAS EN 301 744 V1.1.1:2021 EN 301 744 V1.1.1:2000, IDT Fixed Radio Systems; Point-to- pr en 10.99 multipoint equipment; Direct Sequence Code Division/Time Division Multiple Access (DS-CD/TDMA); Point-to- multipoint digital packet radio systems in frequency bands in the range 3 GHz to 11 GHz
356 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 302 091-4 V1.1.1:2021 EN 302 091-4 V1.1.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN) and Broadband Private Integrated Services Network (B- PISN); Digital Subscriber Signalling System No. two (DSS2) and Broadband Inter-Exchange Signalling (B-QSIG) and Signalling System No.7 (SS7); Prenegotiation; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification BAS/TC 65 prBAS EN 302 092-4 V1.1.1:2021 EN 302 092-4 V1.1.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN) and Broadband Private Integrated Services Network (B- PISN); Digital Subscriber Signalling System No. two (DSS2) and Broadband QSIG (B-QSIG) protocols; Call control specification in separated call and bearer control environment; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification BAS/TC 65 prBAS EN 302 093-4 V1.1.1:2021 EN 302 093-4 V1.1.1:2000, IDT Broadband Integrated Services Digital pr en 10.99 Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Point-to-point multiconnection bearer control specification in a separated call and bearer environment; Part 4 : Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification
357 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 302 094-3 V1.1.1:2021 EN 302 094-3 V1.1.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Digital Subscriber Signalling System No. one (DSS1) and Signalling System No.7 (SS7) protocols; Call Forwarding on Not Reachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
BAS/TC 65 prBAS EN 302 094-5 V1.1.1:2021 EN 302 094-5 V1.1.1:2001, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Digital Subscriber Signalling System No. one (DSS1) and Signalling System No.7 (SS7) protocols; Call Forwarding on Not Reachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
BAS/TC 65 prBAS EN 302 217-1 V1.1.3:2021 EN 302 217-1 V1.1.3:2004, IDT Fixed Radio Systems; Characteristics pr en 10.99 and requirements for point-to-point equipment and antennas; Part 1: Overview and system-independent common characteristics BAS/TC 65 prBAS EN 302 217-1 V1.1.4:2021 EN 302 217-1 V1.1.4:2005, IDT Fixed Radio Systems; Characteristics pr en 10.99 and requirements for point-to-point equipment and antennas; Part 1: Overview and system-independent common characteristics BAS/TC 65 prBAS EN 302 217-2-1 EN 302 217-2-1 V1.1.3:2004, IDT Fixed Radio Systems; Characteristics pr en 10.99 V1.1.3:2021 and requirements for point-to-point equipment and antennas; Part 2-1: System-dependent requirements for digital systems operating in frequency bands where frequency co-ordination is applied
358 Trenutna Referentni broj izvornog Metoda BAS/TC Referentni broj BAS standarda Naziv na engleskom jeziku Jezik ICS faza dokumenta preuzimanja izrade BAS/TC 65 prBAS EN 302 217-4-1 EN 302 217-4-1 V1.1.3:2004, IDT Fixed Radio Systems; Characteristics pr en 10.99 V1.1.3:2021 and requirements for point-to-point equipment and antennas; Part 4-1: System-dependent requirements for antennas BAS/TC 65 prBAS EN 302 326-2 V1.1.1:2021 EN 302 326-2 V1.1.1:2005, IDT Fixed Radio Systems; Multipoint pr en 10.99 Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment BAS/TC 65 prBAS EN 302 326-2 V1.2.2:2021 EN 302 326-2 V1.2.2:2007, IDT Fixed Radio Systems; Multipoint pr en 10.99 Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment BAS/TC 65 prBAS EN 302 326-3 V1.1.1:2021 EN 302 326-3 V1.1.1:2005, IDT Fixed Radio Systems; Multipoint pr en 10.99 Equipment and Antennas; Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Multipoint Radio Antennas
BAS/TC 65 prBAS EN 302 646-4 V7.0.1:2021 EN 302 646-4 V7.0.1:2000, IDT Integrated Services Digital Network pr en 10.99 (ISDN); Signalling System No.7 (SS7); Digital cellular telecommunications system (Phase 2+); Application of ISDN User Part (ISUP) version 3 for the ISDN- Public Land Mobile Network (PLMN) signalling interface; Part 4: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification
359 Dodatak B. Faze izrade bosanskohercegovačkih standarda
PODFAZE IZRADE 90 FAZE Podfaze odlučivanja IZRADE 00 20 60 92 93 98 99 Registracija Početak glavne Završetak Ponavljanje Ponavljanje Odustajanje Prihvatanje i aktivnosti glavne ranije faze tekuče faze nastavak aktivnosti rada 00 00.00 00.20 00.60 00.98 00.99 Preliminarna prijedlog za pokrenuto zaključak o odustajanje prijedlog faza novi projekat razmatranje prijedlogu za od prijedloga novog projekta primljen prijedloga novi projekt prihvaćen 10 10.00 10.20 10.60 10.92 10.98 10.99 Faza registracija izjašnjavanje o završetak prijedlog odustajanje projekt prijedloga prijedloga prijedlogu prikupljanja vraćen od prijedloga prihvaćen projekta primjedbe o podnositelju kao prBAS prijedlogu prijedloga na daljnju razradu 20 20.00 20.20 20.60 20.98 20.99 Faza registracija rad na nacrtu završetak odustajanje nacrt pripreme projekta dokumentu prikupljanja od projekta dokumenta u program primjedbe na odobren za rada TC-a nacrt dokumenta registraciju (prBAS) kao pnBAS
30 30.00 30.20 30.60 30.92 30.98 30.99 Faza registracija izjašnjavanje o završetak prednacrt BAS odustajanje prednacrt BAS komiteta prednacrta pnBAS prikupljanja standarda od projekta standarda BAS primjedbe na vraća odobren za standarda prednacrt BAS se TC-u registraciju (pnBAS) standarda kao nsBAS 40 40.00 40.20 40.60 40.92 40.93 40.98 40.99 Faza registracija javna rasprava o prikupljene nsBAS vraća odluka o novoj odustajanje nsBAS javne nacrta BAS nsBAS primjedbe na se TC-u javnoj raspravi od projekta odobren za rasprave standarda nsBAS registraciju (nsBAS) kao psBAS 50 50.00 50.20 50.60 50.92 50.98 50.99 Faza registracija izjašnjavanje o završetak psBAS vraća odustajanje psBAS odobravanja prijedloga BAS psBAS prikupljanja se TC-u od projekta odobren za standarda primjedbe; registraciju (psBAS) potvrđen kao BAS psBAS 60 60.00 60.60 Faza registracija BAS standard objavljivanja BAS dostupan standarda javnosti 90 90.20 90.60 90.92 90.93 90.99 Faza periodično završetak revizija BAS BAS standard prijedlog TC-a preispitivanj preispitivanje preispitivanja standard potvrđen o povlačenju a BAS standarda BAS standarda 95 95.20 95.60 95.92 95.99 Faza izjašnjavanje o završetak odluka o povlačenje povlačenja povlačenju BAS prikupljanja nepovlačenju BAS standarda primjedbe standarda
Skraćenice: prBAS prijedlog novog projekta BAS standarda/novi projekt BAS standarda pnBAS prednacrt BAS standarda nsBAS nacrt BAS standarda psBAS konačni nacrt BAS standarda BAS bosanskohercegovački standard
360 Dodatak C. PREGLED BOSANSKOHERCEGOVAČKIH TEHNIČKIH KOMITETA
Oznaka tehničkog Naziv tehničkog komitete Status komiteta BAS/TC 1 Informaciona tehnologija Aktivan BAS/TC 2 Zavarivanje i srodni postupci Aktivan BAS/TC 3 Upravljanje kvalitetom i osiguranje kvaliteta Aktivan BAS/TC 4 Čelik, čelični proizvodi, obojeni metali i legure Aktivan BAS/TC 5 Telekomunikacije Aktivan BAS/TC 6 Oprema za eksplozivne atmosfere Aktivan BAS/TC 7 Okolina Aktivan BAS/TC 8 Koordinacija izolacije, visokonaponska ispitivanja i mjerni transformatori Aktivan BAS/TC 9 Cement, gips, kreč i drugi anorganski vezivni materijali Aktivan BAS/TC 10 Oprema za mjerenje električne energije i upravljanje opterećenjem Aktivan BAS/TC 11 Nafta i naftni derivati Aktivan BAS/TC 13 Zaštita od požara Aktivan BAS/TC 14 Lična zaštitna oprema Aktivan BAS/TC 15 Elektromagnetna kompatibilnost Aktivan BAS/TC 16 Mašinski elementi Aktivan BAS/TC 17 Tehničko crtanje, simboli i jedinice Aktivan BAS/TC 18 Energetski transformatori, mjerni releji i zaštitna oprema Aktivan BAS/TC 19 Električne instalacije u zgradama Aktivan BAS/TC 21 Beton i proizvodi od betona Aktivan BAS/TC 22 Cestogradnja Aktivan BAS/TC 23 Ljekovito i aromatično bilje Aktivan BAS/TC 24 Ispitivanja bez razaranja (IBR) Aktivan BAS/TC 25 Tehnologija zaštite zdravlja Aktivan BAS/TC 27 Rudarstvo Aktivan BAS/TC 29 Sredstva i ureĎaji za dizanje i prenošenje tereta Aktivan BAS/TC 30 Električni kablovi Aktivan BAS/TC 31 Gas i gasna tehnika Aktivan BAS/TC 35 Cestovna vozila Aktivan BAS/TC 36 Arhitektonske konstrukcije, tehnologija i organizacija graĎenja i fizika zgrade Aktivan BAS/TC 37 Sigurnost graĎevina od požara Aktivan BAS/TC 38 Mjeriteljstvo i mjerenja Aktivan BAS/TC 39 Zaštita materijala od korozije Aktivan BAS/TC 40 Mašine i alate Aktivan BAS/TC 41 Oprema pod pritiskom i kontejneri Aktivan BAS/TC 42 Drvo i proizvodi od drveta Aktivan BAS/TC 43 Hrana Aktivan BAS/TC 44 Bibliotečko–informacijske nauke Aktivan BAS/TC 45 Poljoprivreda Aktivan BAS/TC 46 Željeznice Aktivan BAS/TC 47 UreĎaji i sistemi za grijanje i hlaĎenje Aktivan BAS/TC 48 Tekstil, koža, odjeća i obuća Aktivan BAS/TC 49 Hemijski inžinjering, laboratorije i kozmetika Aktivan BAS/TC 50 Ambalaža, plastika i guma Aktivan BAS/TC 51 Automatika Aktivan BAS/TC 52 Upravljačka i sklopna postrojenja Aktivan BAS/TC 53 Fluidi i sistemi fluida Aktivan BAS/TC 54 Sigurnost igračaka i proizvoda za djecu Aktivan BAS/TC 55 Društvena odgovornost Aktivan
361 Oznaka tehničkog Naziv tehničkog komitete Status komiteta BAS/TC 56 Konvencionalni i alternativni izvori električne energije Aktivan BAS/TC 57 Kućanski i slični električni aparati Aktivan BAS/TC 58 Eurokodovi - Projektovanje graĎevinskih konstrukcija - Eurokod EN 1990, eurokodovi 1, Aktivan 7, 8 i 9 BAS/TC 59 Društvena sigurnost i zaštita Aktivan BAS/TC 60 Vrata i prozori Aktivan BAS/TC 61 Eurokodovi - Projektovanje graĎevinskih konstrukcija - Eurokodovi 3 i 5 Aktivan BAS/TC 62 Eurokodovi - Projektovanje graĎevinskih konstrukcija - Eurokodovi 2, 4 i 6 Aktivan BAS/TC 63 VS1 - Opća standardizacija Aktivan BAS/TC 64 VS2 - Elektrotehnička standardizacija Aktivan BAS/TC 65 VS3 - Standardizacija iz oblasti telekomunikacija Aktivan BAS/TC 28 Eksplozivi za civilne namjene U mirovanju
362