DOCSLIB.ORG

BS Octombrie 2018

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
BS Octombrie 2018 BULETINUL STANDARDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Octombrie 2018 CUPRINS Direcţia Comercială Șef Serviciu: Eduard Laurențiu Ioan Redactare şi tehnoredactare: Serviciul Producţie STANDARDIZAREA NAŢIONALĂ ......................... 1 Management Informatic: Dumitriana Bănică, Standarde aprobate ������������������������������������������������������������������������ 1 Monica Marin, Ştefania Kraus Standarde anulate ���������������������������������������������������������������������������12 Standarde europene adoptate iniţial prin filă de confirmare sau notă de confirmare pentru care se publică versiunea română ������������������������15 Standarde române originale confirmate ��������������������������21 Propuneri de anulare în anchetă publică ��������������������������������������������������������������������������21 Modificări în organizarea şi structura comitetelor tehnice �����������������������������������������������������������������������22 STANDARDIZAREA EUROPEANĂ ...................... 23 Standarde europene CEN aprobate �������������������������������������23 Standarde europene CENELEC aprobate �������������������������28 Standarde europene ETSI aprobate �������������������������������������29 Proiecte de standarde europene CEN supuse anchetei publice �������������������������������������������������������������37 Proiecte de standarde europene CENELEC supuse anchetei publice �������������������������������������������������������������42 Proiecte de standarde europene ETSI supuse anchetei publice �������������������������������������������������������������44 STANDARDIZAREA INTERNAŢIONALĂ ............. 45 Standarde internaţionale ISO aprobate �����������������������������45 Standarde internaţionale IEC aprobate �����������������������������50 Proiecte de standarde internaţionale ISO supuse anchetei publice �������������������������������������������������������������51 Proiecte de standarde internaţionale IEC supuse anchetei publice �������������������������������������������������������������55 NOTIFICĂRI ......................................................... 57 © Toate drepturile rezervate Asociaţiei de Standardizare din România Potrivit Legii 163/2015 privind standardizarea naţională în România, ASRO beneficiază de protecţia drepturilor de autor asupra standardelor naţionale în condiţiile Legii privind drepturile de autor şi drepturile conexe. Reproducerea sau utilizarea integrală sau parţială a standardelor naţionale sau a conţinutului publicaţiilor organismului naţional de standardizare prin orice procedeu (electronic, mecanic, fotocopiere, microfilmare) este interzisă, dacă nu există în prealabil, acordul ASRO. ISSN 2559-4230 Publica ţie finan ţat ă de MINISTERUL ECONOMIEI STANDARDIZAREA NA ŢIONAL Ă STANDARDE APROBATE Standardele române de mai jos au fost aprobate în luna septembrie 2018. Standardele europene şi interna ţionale sunt adoptate ca standarde române prin metoda versiunii române ( T), metoda filei de confirmare (FC ) sau metoda notei de confirmare ( A). Eratele la standardele europene şi interna ţionale sunt notate cu simbolul ( ER ). Standardele române originale sunt notate cu E. Sub indicativul standardului este indicat num ărul comitetului tehnic ( CT ) responsabil. Pentru standardele adoptate prin metoda filei de confirmare sau metoda notei de confirmare, textul standardului nu este publicat în versiune român ă. Versiunile originale ale acestor standarde pot fi consultate sau procurate de la Asocia ţia de Standardizare din România. În aceast ă rubric ă sunt cuprinse, de asemenea, amendamente şi erate ale standardelor române. În cazul în care un standard aprobat înlocuie şte şi anuleaz ă unul sau mai multe standarde existente, indicativul/indicativele acestora sunt indicate după titlul standardului respectiv. Informa ţii privind standardele anulate sunt date în rubrica STANDARDE ANULATE. 01 GENERALIT ĂŢ I, TERMINOLOGIE, STANDARDIZARE. SR EN ISO 19011:2018 T DOCUMENTARE CT 56 01.060 Mărimi şi unit ăţ i Linii directoare pentru auditarea sistemelor de management Inlocuieste: SR EN ISO 19011:2011 SR EN ISO 7345:2018 A CT 281 03.120 Calitate Performan ţa termic ă a cl ădirilor şi a materialelor de 03.120.10 Managementul calit ăţ ii şi asigurarea calit ăţ ii construc ţie. M ărimi fizice şi defini ţii Inlocuieste: SR EN ISO 7345:2002 SR EN ISO 9004:2018 A CT 56 01.110 Documenta ţie tehnic ă de produs Managementul calit ăţ ii. Calitatea unei organiza ţii. Îndrum ări pentru ob ţinerea unui succes durabil SR EN 9300 -200:2018 A Inlocuieste: SR EN ISO 9004:2010 CT 72 Serie aerospa ţial ă. LOTAR. Arhivarea pe termen lung şi SR ISO 39001:2018 T recuperarea datelor tehnice de produs digitalizate cum ar fi CT 187 date 3D, CAD şi PDM. Partea 200: Concepte generale pentru Sisteme de management ale siguran ţei traficului rutier (RTS). arhivarea pe termen lung şi recuperarea informa ţiilor structurii Cerin ţe şi recomand ări de bune practici produselor 03.120.20 Certificarea produselor şi a întreprinderilor. 03 SERVICII. ORGANIZAREA ÎNTREPRINDERII, Evaluarea conformit ăţ ii MANAGEMENT ŞI CALITATE. ADMINISTRARE. TRANSPORT. SOCIOLOGIE SR EN ISO 19011:2018 T 03.100 Organizarea şi managementul întreprinderii. CT 56 Sisteme de management Linii directoare pentru auditarea sistemelor de management 03.100.01 Organizarea şi managementul întreprinderii în Inlocuieste: SR EN ISO 19011:2011 general SR EN 16991:2018 A 11 MEDICIN Ă CT 144 11.040 Echipament medical 11.040.30 Instrumente şi materiale chirurgicale Cadru pentru inspec ţie bazat ă pe risc SR EN IEC 62667:2018 A 03.100.70 Sisteme de management CT 22 SR EN ISO 9004:2018 A Aparate electromedicale. Aparate medicale cu fascicul de ioni de lumin . Caracteristici de performan CT 56 ă ţă Managementul calit ăţ ii. Calitatea unei organiza ţii. Îndrum ări pentru ob ţinerea unui succes durabil Inlocuieste: SR EN ISO 9004:2010 Buletinul Standardiz ării – Octombrie 2018 13 MEDIU. PROTEC ŢIA S ĂNĂTĂŢ II. SECURITATE 13.320 Sisteme de alarm ă şi de alert are 13.020 Protec ţia mediului 13.020.30 Studii de impact asupra mediului SR EN 62676 -3:2015/AC:2018 ER CT 27 SR EN IEC 62933 -2-1:2018 A Sisteme de supraveghere video care se utilizeaz ă în aplica ţiile CT 161 de securitate. Partea 3: Interfe ţe video digitale şi analogice Sisteme de stocare a energiei electrice (EES). Partea 2-1: Parametrii unit ăţ ii şi metode de încercare. Specifica ţie 13.340 Echipament de protec ţie individual ă general ă 13.340.20 Echipamente de protec ţie a capului 13.080 Calitatea solului. Pedologie SR EN ISO 10256 -2:2018 A 13.080.20 Propriet ăţ i fizice ale solurilor CT 227 Echipament de protec ţie pentru utilizare la hochei pe ghea ţă . SR EN ISO 17892 -9:2018 A Partea 2: Protectori pentru cap pentru patinatori CT 361 Inlocuieste: SR EN ISO 10256:2004 Investiga ţii şi încerc ări geotehnice. Încerc ări de laborator ale solului. Partea 9: Încerc ări consolidate de compresiune SR EN ISO 10256 -3:2018 A triaxial ă ale solurilor saturate cu ap ă CT 227 Echipament de protec ţie pentru utilizare la hochei pe ghea ţă . 13.220 Protec ţia contra incendiilor Partea 3: Protectori pentru fa ţă pentru patinatori 13.220.50 Rezisten ţa la foc a materialelor şi a elementelor Inlocuieste: SR EN ISO 10256:2004 de construc ii ţ SR EN ISO 10256 -4:2018 A SR EN 15254 -5:2018 A CT 227 CT 217 Echipament de protec ţie pentru utilizare la hochei pe ghea ţă . Extinderea domeniului de aplicare a încerc ărilor de rezisten ţă Partea 4: Protectori pentru cap şi fa ţă pentru portari la foc. Pere ţi neportan ţi. Partea 5: Panouri metalice tip sandvi ş Inlocuieste: SR EN ISO 10256:2004 pentru construc ţii Inlocuieste: SR EN 15254 -5:2010 13.340.30 Dispozitive de protec ţie respiratorie SR EN 15254 -7:2018 A SR EN 144 -1:2018 A CT 217 CT 227 Extinderea domeniului de aplicare a încerc ărilor de rezisten ţă Aparate de protec ţie respiratorie. Robinete pentru butelii de la foc. Plafoane neportante. Partea 7: Panouri metalice tip gaz. Partea 1: Racorduri de intrare sandvi ş pentru construc ţii Inlocuieste: SR EN 144 -1:2003 Inlocuieste: SR EN 15254 -7:2012 SR EN 144 -1:2003/A1:2003 SR EN 144 -1:2003/A2:2005 SR EN 15269 -11:2018 A CT 217 SR EN 144 -2:2018 A Extinderea domeniului de aplicare a rezultatelor pentru CT 227 încerc ări de rezisten ţă la foc şi/sau control al fumului pentru Aparate de protec ţie respiratorie. Robinete pentru butelii de uşi, obloane şi ansambluri care deschid ferestre, inclusiv gaz. Partea 2: Racorduri de ie şire elemente de feronerie. Partea 11: Rezisten ţa la foc a Inlocuieste: SR EN 144 -2:2003 cortinelor mobile din material textil 13.340.50 Echipamente de protec ţie pentru picior 13.260 Protec ţia contra electrocut ării SR EN 50321 -1:2018/AC:2018 T SR EN 50321 -1:2018/AC:2018 T CT 176 CT 176 Lucr ări sub tensiune. Înc ălţă minte pentru protec ţie electric ă. Lucr ări sub tensiune. Înc ălţă minte pentru protec ţie electric ă. Înc ălţă minte şi galo şi electroizolan ţi Înc ălţă minte şi galo şi electroizolan ţi 17 METROLOGIE ŞI M ĂSURARE. FENOMENE FIZICE SR HD 60364 -5-52:2011/A11:2018 A 17.140 Acustic ă şi m ăsur ări acustice CT 136 17.140.50 Electroacustic ă Instala ţii electrice de joas ă tensiune. Partea 5-52: Alegerea şi montarea echipamentelor electrice. Sisteme de pozare SR EN IEC 60942:2018 A CT 26 13.280 Protec ţia contra radia ţiilor Electroacustic ă. Calibratoare acustice Inlocuieste: SR EN 60942:2004 SR EN 50364:2018 A CT 279 17.160 Vibra ţii, şocuri şi m ăsur ări ale vibra ţiilor Standard de produs pentru expunerea uman ă la câmpuri electromagnetice generate
Load more

Recommended publications
  • Bureau of Standards (BOBS) Head Office: Main Airport Road Plot No
    Bureau of Standards (BOBS) Head Office: Main Airport Road Plot No. 55745 Block 8, Gaborone Private Bag BO 48 Tel: +267 3903200 Fax: +267 3903120 Email: [email protected] Website: www.bobstandards.bw Francistown Branch: Plot 23267 Donga, Adjacent to Metsef Wholesalers Private Bag F465, Francistown Tel: +267 2416232 Fax: +267 2416251 BOBS Standards Work Programme BULLETIN 1 April 2020 – 31 March 2021 [Issue No.26] Gaborone, Botswana Contents International Classification for Standards (ICS).............. 3 List of technical Committees........................................... 5 Draft Botswana Standards.............................................. 8 Project stages table........................................................ 32 International Classification for Standards (ICS) Main ICS Subject Fields 01 Generalities. Terminology. Standardization. Documentation 03 Sociology. Services. Company Organization and Management. Administration. Transport 07 Mathematics. Natural Sciences 11 Health Care Technology 13 Environment and Health Protection. Safety 17 Metrology and Measurement. Physical Phenomena 19 Testing 21 Mechanical Systems and Components for General Use 23 Fluid Systems and Components for General Use 25 Manufacturing Engineering 27 Energy and Heat Transfer Engineering 29 Electrical Engineering 31 Electronics 33 Telecommunications 35 Information Technology. Office Equipment 37 Image Technology 39 Precision Mechanics. Jewellery 43 Road Vehicle Engineering 45 Railway Engineering 47 Ship Building and Marine Structures 49 Aircraft
    [Show full text]
  • PROPOSED WORK PROGRAM for 2020 As of July 2020
    BUREAU OF PHILIPPINE STANDARDS PROPOSED WORK PROGRAM FOR 2020 as of July 2020 SUBJECT PROJECT REFERENCE STATUS STAGES OF DEVELOPMENT INTERNATIONAL TECHNICAL COMMITTEE [New/Revision 1. Preparatory CLASSIFICATION FOR BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS Standard Test Method for Time of Setting of Concrete ASTM C403 / C403M - 16 New Finalization 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete Mixtures by Penetration Resistance Standard Test Method for Measuring Thickness of Concrete ASTM C174 / C174M - 17 New Finalization 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete Elements Using Drilled Concrete Cores Standard Specification for Materials for Shotcrete ASTM C 1436-13 New Finalization 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete Standard Test Method for Flexural Strength of Concrete ASTM C293/C293M-16 New Finalization 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete (Using Simple Beam with Center-Point Loading) Standard Specification for Grout for Masonry ASTM C476-19 New Drafting/Deliberation 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete Standard Specification for Mortar for Unit Masonry ASTM C270-19e1 New Drafting/Deliberation 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete Standard Test Method for Flexural Strength of Concrete ASTM C78 / C78M - 18 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete (Using Simple
    [Show full text]
  • Iso/Tc292 規格開発状況（2021 年 6 月）
    ISO/TC292 規格開発状況（2021 年 6 月） 注：オレンジ色のハイライトは，日本提案案件 WG 規格番号 タイトル 現在のステータス 備 考 ISO/TR 22312:2011 Societal security — Technological capabilities 1 ISO 22300:2021 Security and resilience — Vocabulary 発行済み 2 ISO 22301:2019 Security and resilience — Business continuity 発行済み JIS Q 22301:2020 management systems — Requirements セキュリティ及びレジリエンス―事業継続マネジメント 更なる参考書 システム―要求事項 外部リンク（ISO） 2 ISO 22313:2020 Security and resilience — Business continuity 発行済み JIS Q22313 改正中 management systems — Guidance on the use of ISO 22301 2 ISO 22316:2017 Security and resilience — Organizational resilience — 発行済み Principles and attributes 2 ISO/TS 22317:2015 Societal security -- Business continuity management 発行済み 改定中（今夏発行予定） systems -- Guidelines for business impact analysis (BIA) 1 2 ISO/TS 22318:2015 Societal security — Business continuity management 発行済み 改定中（今夏発行予定） systems — Guidelines for supply chain continuity 2 ISO/TS 22330:2018 Security and resilience — Business continuity 発行済み management systems — Guidelines for people aspects of business continuity 2 ISO/TS 22331:2018 Security and resilience — Business continuity 発行済み management systems — Guidelines for business continuity strategy 2 ISO/TS 22332:2021 Security and resilience — Business continuity 発行済み management systems — Guidance for developing business continuity procedures CASCO ISO/IEC 17021-6 Conformity assessment — Requirements for bodies 定期見直し実施中 providing audit and certification of management (ISO/CASCO主導) systems — Part 6: Competence requirements for auditing and certification of business continuity
    [Show full text]
  • How Standards Contribute to Business Resilience in Crisis Situations
    Physikalisch-Technische Bundesanstalt INTERNATIONAL Braunschweig und Berlin National Metrology Institute COOPERATION Current Situation How Standards Contribute to Business Resilience in Crisis Situations Niels Ferdinand, Richard Prem On behalf of the Federal Government of Germany, the Physikalisch-Technische Bundesanstalt promotes the improvement of the framework conditions for economic, social and environmentally friendly action and thus supports the development of quality infrastructure. 2 CONTENTS 1. Background 4 2. The significance of standards on increasing business resilience 4 2.1. Defining resilience and business continuity management 4 2.2. Fields of action for increasing business resilience 5 2.3. The correlation between standardisation and business resilience 5 2.4. Risk management in standardisation 7 3. Specific standards for resilience and business continuity management 8 3.1. Topic overview for specific standards 8 3.2. Effectiveness of standards in social and economic crises 10 Abbreviations 11 References 12 An overview of existing standards, specifically in regard to business resilience 14 E-Learning resources 21 Notes 22 3 1. BacKgroUND 1. Background The global corona virus crisis is presenting enormous This paper summarises the current state of affairs of challenges for companies worldwide. Companies in de- standardisation in the area of business resilience. It will veloping and emerging nations are especially affected, as explain the general contributions standardisation can the crisis has severe ramifications for them, and they have make towards promoting resilience. On this basis, it will less access to support. This raises the question of how we give an overview to specific standards relevant to busi- can use standardisation to improve the resilience of com- ness resilience.
    [Show full text]
  • Iso/Dis 22383
    W - IE 90 V af E 50 ef R i) t/ 3 P a is 38 . /s 2 D eh s -2 R t rd is .i : a d A s d d o- D d r an is N r da st e/ a n g/ c A d ta o c5 T n s al 5 S a ll t 2 t u ca 9 h (s F i/ 7 e a b8 T h. 0 Security and resilience — Authenticity, integrity and i e -5 DRAFT INTERNATIONAL STANDARD .it f trust for products and documents — Guidelines and s 1a rd -a performance criteria for authentication solutions for a 4e nd 8 material goods ta -4 /s e :/ 6 s 68 Sécurité et résilience — Authenticité, intégrité et confiance pour les produits et les documents — Lignes tp directrices et critères de performance relatifs aux solutions d'authentificationISO/TC des biens matériels ht Voting begins on: ICS: 03.100.01 2019-09-03 292 Secretariat: ISO/DIS 22383 Voting terminates on: 2019-11-26 SIS THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH. IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS. RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
    [Show full text]
  • D 8.2 Standardization Landscape Report FINAL
    Ref. Ares(2019)7594067 - 10/12/2019 - FORESEE - Future proofing strategies FOr RESilient transport networks against Extreme Events – Deliverable 8.2– Standardization Landscape Report Project reference no. 769373 Deliverable no: 8.2 Work Package no: 8 Status Final Version: 4 Author: José Díez (ERF)/UNE Date: Nature: Report Dissemination level: Public Copyright © 2018 FORESEE Project Disclaimer: FORESEE has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No 769373. This document reflects only the author’s views. The European Commission and INEA are not responsible for any use that may be made of the information contained therein. D8.2 Standardization Landscape Report Disclaimer: Participant Legal Name Country FORESEE has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No 769373. 1 FUNDACION TECNALIA RESEARCH & INNOVATION (TEC) Spain This document reflects only the author’s views. The European Commission and INEA are not responsible for any use that may be made of the information contained therein. 2 RINA CONSULTING SPA (RINA-C) Italy 3 FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN Germany FORSCHUNG E.V. (FRAUNHOFER) 4 UNIVERSIDAD DE CANTABRIA (UC) Spain 5 FUTURE ANALYTICS CONSULTING LIMITED (FAC) Ireland 6 FERROVIAL AGROMAN SA (FERR) Spain 7 UNIVERSITY OF BATH (BATH) United Kingdom 8 CENTRO DE ESTUDIOS DE MATERIALES Y CONTROL DE OBRA SA (CEMOSA) Spain 9 LOUIS BERGER SPAIN SA (LB) Spain 10 INGENIERÍA Y CONSERVACIÓN CONTRAINCENDIOS, S.L. (ICC) Spain 11 INFRAESTRUTURAS DE PORTUGAL SA (IP) Portugal 12 AISCAT SERVIZI SRL (AIS) Italy 13 AUTOSTRADE PER L’ITALIA S.P.A.
    [Show full text]
  • Significant Implication of Optimal Expansion Planning in Wind Turbines Toward Composite Generating System Reliability
    Significant Implication of Optimal Expansion Planning in Wind Turbines toward Composite Generating System Reliability 1,2* 1 1,2 1,2 Muhammad Murtadha Othman , Nadia Hassin , Ismail Musirin & Nur Ashida Salim 1Faculty of Electrical Engineering, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia; 2Committee of Research (CORE), Advanced Computing & Communication (ACC), Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia This paper presents the stochastic approach deployed to perform expansion planning of the wind turbine generating (WTG) units in a power system. The expansion planning of WTG requires the information of its forced outage rate (FOR) determined by using the continuous-time Markov Chain. The FOR represents as an outage probability of a component emerged as it is taken out intentionally from a system customarily for the purpose of preventive maintenance or repair. In contrast with the conventional power plant, for the case study of WTG, the determination of FOR is utterly unique since it depends on the information of uncertain weather condition. Hence, the loss of load expectation (LOLE) and expected unserved energy (EUE) could be estimated so that it will not infringe its respective predetermined limits indispensable for the expansion planning of WTG using the stochastic approach. The modified IEEE RTS-79 system is used as a case study to verify effectiveness of the proposed method in the determination of WTG expansion planning. The results have shown improvement on the EUE and LOLE in relation with optimal expansion of the WTG units determined by using the proposed method. Keywords: Optimal Expansion Planning; Wind Turbine Generating Units; Continuous-Time Markov Chain; Loss of Load Expectation; Expected Unserved Energy.
    [Show full text]
  • ISO 22382:2018 01D0ed40c6d0/Iso-22382-2018
    INTERNATIONAL ISO STANDARD 22382 First edition 2018-10 Security and resilience — Authenticity, integrity and trust for products and documents — Guidelines for the content, security, issuance and examination of excise tax stamps Sécurité et résilience — Authenticité, intégrité et confiance pour iTeh STlesA produitsNDA etR lesD documents PREV —I LignesEW directrices relatives au contenu, à la sécurité, à l'émission et à l'examen des timbres fiscaux (streprésentatifsandards de.i droitsteh .d'acciseai) ISO 22382:2018 https://standards.iteh.ai/catalog/standards/sist/7f43f2d9-6f6e-4daa-bef4- 01d0ed40c6d0/iso-22382-2018 Reference number ISO 22382:2018(E) © ISO 2018 ISO 22382:2018(E) iTeh STANDARD PREVIEW (standards.iteh.ai) ISO 22382:2018 https://standards.iteh.ai/catalog/standards/sist/7f43f2d9-6f6e-4daa-bef4- 01d0ed40c6d0/iso-22382-2018 COPYRIGHT PROTECTED DOCUMENT © ISO 2018 All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester. ISO copyright office CP 401 • Ch. de Blandonnet 8 CH-1214 Vernier, Geneva Phone: +41 22 749 01 11 Fax:Website: +41 22www.iso.org 749 09 47 Email: [email protected] iiPublished in Switzerland © ISO 2018 – All rights reserved ISO 22382:2018(E)
    [Show full text]
  • Hvordan Kan Internasjonale Standarder Bidra Til Et Tryggere Og Mer Robust Samfunn? Erfaringer Fra Sverige
    Hvordan kan internasjonale standarder bidra til et tryggere og mer robust samfunn? Erfaringer fra Sverige 13 June, 2019 Stefan Tangen, [email protected] Swedish Civil Contingencies Agency (MSB) ISO/TC 292 Security and resilience (Expert, Convenor) ISO/TC 223 Societal security (secretary 2006-2013) Varför är det svårt att ta tåget istället för att flyga i Europa? Example on cargo security SWEDEN 2001 • Safe Swedish rules • Stakeholders are happy • No motive to participate in EU harmonization projects • Waste of time and money! GERMANY 2001 • Transit country • East european causes problem on autobahn • Dont use lashings • …lots of lashing producers! Europe, 2004 • CEN publish EN 12195-1 which is adopted as national rule in Germany • Swedish stakeholders extremely upset • Swedish stakeholders lose huge amounts of time and money (indefinite future) Opportunities or barriers? 1. Can be an extremily powerful tool especially in combination with legislation/directives 2. Only YOU can represent YOUR views 3. The good, the bad and the ugly… MSB in short… ”bidra til et tryggere og mer robust samfunn” The MSB is responsible for issues concerning civil protection, public safety, emergency management and civil defence as long as no other authority has responsibility. Responsibility refers to measures taken before, during and after an emergency or crisis We work • via knowledge enhancement, support, training, exercises, regulation, supervision and our own operations • in close cooperation with the municipalities, county councils, other authorities, the private sector and various organizations • to achieve greater security and safety at all levels of society, from local to global MSB and standardization • MSB is very active in standardization and use standards • 30 employes participate in over 20 national technincal committees • We work according to a standardization strategy, with various of aims and procedures.
    [Show full text]
  • Standardiseringsprosjekter Og Nye Standarder
    Annonseringsdato: 2019-02-27 Listenummer: 5/2019 Standardiseringsprosjekter og nye standarder Listenummer: 5/2019 Side: 1 av 170 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - nasjonale prNS 3467 Steg og leveranser i byggeprosessen Stages and deliverables in the building process Språk: no Kommentarfrist: 19.04.2020 Standardforslag til høring - europeiske (CEN) prEN 235 Veggkledninger - Terminologi og symboler Wallcoverings - Vocabulary and symbols Språk: en Kommentarfrist: 25.04.2019 prEN 17173 European CBRNE glossary Språk: en Kommentarfrist: 18.04.2019 prEN 17173 European CBRNE glossary Språk: en Kommentarfrist: 18.04.2019 prEN ISO 6414 Technical product documentation (TPD) - Technical drawings for glassware (ISO/DIS 6414:2018) Språk: en Kommentarfrist: 08.03.2019 prEN ISO 8044 Korrosjon av metaller og legeringer - Grunnleggende termer og definisjoner (ISO/DIS 8044:2019) Corrosion of metals and alloys - Basic terms and definitions (ISO/DIS 8044:2019) Språk: en Kommentarfrist: 17.04.2019 Standardforslag til høring - internasjonale (ISO) ISO/DIS 3297 Information and documentation - International standard serial numbering (ISSN) Språk: en Kommentarfrist: 20.03.2019 ISO/DIS 3297 Information and documentation -- International standard serial number (ISSN) Språk: en Kommentarfrist: 25.05.2019 ISO/DIS 5681 Equipment for crop protection -- Vocabulary Språk: en Kommentarfrist: 01.04.2019 Listenummer: 5/2019 Side: 2 av 170 01 Generelt. Terminologi.
    [Show full text]
  • Iso 22382:2018
    BS ISO 22382:2018 BSI Standards Publication Security and resilience — Authenticity, integrity and trust for products and documents — Guidelines for the content, security, issuance and examination of excise tax stamps Committee member copy: Do not reproduce WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 BS ISO 22382:2018 BRITISH STANDARD INTERNATIONAL ISO STANDARD 22382 National foreword This British Standard is the UK implementation of ISO 22382:2018. First edition 2018-10 The UK participation in its preparation was entrusted to Technical Committee SSM/1, Societal security management. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. © The British Standards Institution 2018 Published by BSI Standards Limited 2018 Security and resilience — Authenticity, ISBN 978 0 580 98804 2 integrity and trust for products ICS 03.100.01 and documents — Guidelines for Compliance with a British Standard cannot confer immunity from the content, security, issuance and legal obligations. examination of excise tax stamps This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2018. Sécurité et résilience — Authenticité, intégrité et confiance pour les produits et les documents — Lignes directrices relatives au Amendments/corrigenda issued since publication contenu, à la sécurité, à l'émission et à l'examen
    [Show full text]
  • Bureau Voor Normalisatie (NBN)
    BELGISCH STAATSBLAD — 03.07.2020 — MONITEUR BELGE 49273 FEDERALE OVERHEIDSDIENST ECONOMIE, K.M.O., MIDDENSTAND EN ENERGIE [C − 2020/31059] Bureau voor Normalisatie (NBN) Registratie van Belgische normen 1. Overeenkomstig artikel 26 van het koninklijk besluit van 25 okto- ber 2004 betreffende de bekrachtiging en de registratie van de door het Bureau voor normalisatie openbaar gemaakte normen, kondigt dit Bureau de registratie aan van de hierna volgende Belgische normen: NBN EN 10372:2020 Quality tracking system for flat steel products using barcode - Printing, reading and information processing NBN EN 1097-2:2020 Tests for mechanical and physical properties of aggregates - Part 2 : Methods for the determination of resistance to fragmentation vervangt NBN EN 1097-2:2010 (2e uitgave) NBN EN 1097-8:2020 Tests for mechanical and physical properties of aggregates - Part 8 : Determination of the polished stone value vervangt NBN EN 1097-8:2009 (2e uitgave) 20 NBN EN 12199:2020 20 Resilient floor coverings - Specifications for homogeneous and - heterogeneous relief rubber floor coverings 7 0 vervangt NBN EN 12199:2010 (2e uitgave) - 3 NBN EN 13146-4:2020 0 Railway applications - Track - Test methods for fastening systems - . Part 4: Effect of repeated loading d . vervangt NBN EN 13146-4+A1:2014 (3e uitgave) d NBN EN 13146-9:2020 Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness vervangt NBN EN 13146-9+A1:2011 (2e uitgave) NBN EN 13230-6:2020 Railway applications - Track - Concrete sleepers and
    [Show full text]