2021-2022 Catalog | 1

CADT-201 Architectural Print Reading and Estimating COMPUTER AIDED DESIGN 2 Credits Lecture: 2 hours per week TECHNOLOGY (CADT) Offering: Fall Only, All Years This course is an introduction to print reading and interpretation, CADT-141 Introduction to CAD Technology layout, terminology, materials, construction methods, 3 Credits dimensions, symbols, building codes, estimating techniques, and Lecture: 2 hours per week, Lab: 2 hours per week methods of preparing estimates. Offering: Fall Only, All Years CADT-202 Residential Architecture II This course introduces the student to the basic principles of 4 Credits 2D CAD (2-dimensional computer aided design) commands. Lecture: 3 hours per week, Lab: 2 hours per week Typical applications of 2D CAD are presented with basic drafting Offering: Fall Only, All Years and design concepts. Basic working drawings are emphasized This course focuses on residential architectural standards, including plan views, elevations, sections, wall details and stair fixtures, floor plans, sections, elevations, stairs, roofs, details. foundations, and building codes. Primary focus is on wood CADT-142 Introduction to 3D Residential Design construction techniques, terminology, and materials. Various 3 Credits architectural CAD software applications will be utilized. Lecture: 2 hours per week, Lab: 2 hours per week Prerequisites: CADT-131 Offering: Fall Only, All Years CADT-203 Commercial Architecture II This course introduces the student to residential design focusing 3 Credits on composition, conceptual design and principles of organization Lecture: 2 hours per week, Lab: 2 hours per week and 3D development. Students will develop skills using 3D CAD Offering: Fall Only, All Years (3-dimensional computer aided design) software. This course focuses on commercial construction techniques CADT-143 Introduction to 3D Commercial Design including materials, equipment, fixtures, and building codes. 3 Credits Development of various working drawings will be included. Lecture: 2 hours per week, Lab: 2 hours per week Various architectural CAD software applications will be utilized. Offering: Fall Only, All Years Prerequisites: CADT-133 This course introduces the student to commercial design focusing CADT-204 Residential Architecture III on composition, conceptual design and principles of organization 4 Credits and 3D development. Students will develop skills using 3D CAD Lecture: 3 hours per week, Lab: 2 hours per week (3-dimensional computer aided design) software. Offering: Spring Only, All Years CADT-151 Advanced 3D Residential Design This course focuses on advanced residential architectural 3 Credits standards, fixtures, floor plans, sections, elevations, stairs, roofs, Lecture: 2 hours per week, Lab: 2 hours per week foundations, and building codes. Development of various working Offering: Spring Only, All Years drawings will be included. Various architectural CAD software This course introduces the student to advanced residential applications will be utilized. design focusing on floor plan development and elevation Prerequisites: CADT-202 development. Emphasis will be placed on using floor plans and CADT-205 Commercial Architecture III elevations in creating other various working drawings needed to 3 Credits complete a set of drawings for construction. Lecture: 2 hours per week, Lab: 2 hours per week Prerequisites: CADT-143 Offering: Spring Only, All Years CADT-152 Advanced 3D Commercial Design This course focuses on advanced commercial construction 3 Credits techniques including materials, equipment, fixtures, and Lecture: 2 hours per week, Lab: 2 hours per week building codes. Development of various working drawings will be Offering: Spring Only, All Years included. Various architectural CAD software applications will be This course introduces the student to advanced commercial utilized. design focusing on the floor plan development and elevation Prerequisites: CADT-203 development. Emphasis will be placed on using floor plans and CADT-207 Building Design Integration elevations in creating other various working drawings needed to 2 Credits complete a set of drawings for construction. Lecture: 1 hour per week, Lab: 2 hours per week Prerequisites: CADT-143 Offering: Spring Only, All Years CADT-153 Commercial Building Design Integration This course focuses on building design with the integration of 3 Credits design principles, structural components and the mechanical, Lecture: 2 hours per week, Lab: 2 hours per week electrical and plumbing systems. Development of various Offering: Spring Only, All Years working drawings will be included. Various architectural software This course introduces the student to the MEP (mechanical, applications will be utilized. electrical, and plumbing) systems of a commercial building. Corequisites: CADT 204, CADT-205 Concepts of commercial design are integrated with the development of basic drafting/design concepts and applications. Corequisites: CADT-151, CADT-152 2 | Computer Aided Design Technology (CADT)

CADT-250 SolidWorks I 2 Credits Lecture: 1 hour per week, Lab: 2 hours per week Offering: Fall Only, All Years This course is an introduction to SolidWorks and presents fundamental principles towards feature-based parametric modeling and design. Emphasis will be on using basic tools towards the creations of parts, assemblies, and drawings. CADT-252 SolidWorks II 2 Credits Lecture: 4 hours per week Offering: Fall Only, All Years This course is a continuation of CADT-250 and presents more in- depth knowledge with feature-based parametric modeling and design. Emphasis will be on parts, assemblies, and drawings. Prerequisites: CADT-250