General Index to the Four Volumes of Ore Dressing

Total Page:16

File Type:pdf, Size:1020Kb

General Index to the Four Volumes of Ore Dressing LIBRARY OF THE UNIVERSITY OF CALIFORNIA. Class GENERAL INDEX TO THE FOUR VOLUMES OF Ore Dressing BY ROBERT H. RICHARDS, S.B., LL.D. i \ Professor of Mining Engineering and Metallurgy at the Massachusetts Institute of Technology, Boston, Mass., U. S. A. 1909 McGRAW-HILL BOOK COMPANY NEW YORK INDEX. A GENERAL GUIDE TO ALL FOUR VOLUMES. Pages 1-643, Vol. I: 644-1197, Vol. II; 1199-1610, Vol. Ill; 1611-2052, Vol. IV. Action of jaw and spindle breakers 52 Rittinger table 668 Aachen, wash trommel at 331 rolls 62 Aaron, C. H., gold amalgamation 788 steam stamps 113 gravity stamps 226 trommels 373 leaching gold and silver xix vanners 644, 646, 656 losses in gold milling .. 1180 Actions in crushing 8 on amalgamated plates 752 Adair-Usher cyanide process on the Rand 1644 leaching 1167 Adalbert Works, hand picking at 492 testing gold ores by chlorination 1173 Adams, J. M., amalgamating pans 290, 291 Abadie, E. R., gravity stamps 224 amalgam at the Owyhee silver mill 787 North Star gold stamp mill at Grass Valley, dimension of Black Hill traps 773 California 1175 end and side-shake vanners 655, 656 on mortars 165 form of riffles in mercury traps 772 plates at the North Star mill 787 gravity stamps 223, 226, 230 A Bartlett mill xxvii impurities in amalgam 251 Abbe Engineering Company. Abbe spiral feed .... 1323 life of retorts 783 tube mill 1280, 1298 pointed boxes 477 at Guanajuato, capacity of 1291 slope of plates 746 sizing test of feed and discharge 1290 splash plates 736 mills 1291, 1626, 1677 Adams, W. J., amalgamated plates 739, 746 Abbott, J. W., running a stamp mill 229 amalgamation 787, 1173 Absorption of amalgam by plates 765 amalgamation and gold mills xix mercury by amalgamating plates 1514 mercury traps 772 Accelerated jig 507, 510, 515, 519, 610 vanners 655, 656, 727 details of stroke 638 Adelaide mil] 1794 mechanism, air pressure and gravity 537 Adhesion 839 cam and gravity in Stutz coal jig 537 in dry concentration 826 cam and spring 537 of minerals, effect of 4 disc motion 536 separation by 831 for jigs 533 Adjustment of Blake breakers 16, 22, 23 hammer and spring on Collom jigs 536 Card concentrator 1483 motion Harz jigs at Mill 125 1701, 1702, 1703 classifier 430 on Wilfley table 673 Comet breaker 43 Accessory apparatus 842, 1570 Frue vanner for testing 1 153 Accounting, mine 1923 Gates breaker 39 Accounts and reports 1 122 gravity stamps 219 bibliography for 1173 gyratory breakers 1218 Accuracy of machine sampling 1575 Hooper air jig 822, 823 Acids, action of on mercury 730 jigs 552, 598 for cleaning mercury 786 machines 1115 Acids used in settling tests 1147 Mechernich magnetic separators at Mill 135 ... 1736 on amalgamated plates 751 throw on jigs 531, 594, 595 Acid water, cause of base bullion 783 travel, slope, and water on vanners 660 effect of 906 spindle breakers 47 in amalgamation 751 vanners 653, 663, 658, 659 on amalgamated plates 750 Wilfley table head motion 1466 jig tanks 523 Advantages and disadvantages of various crushing plates 749 machines 313 screens 173 accelerated mechanism on jigs 535 neutralized 173 accounts H23 Acme concentrator. L. H. L. Huddart 2023 action of jaw breaker 55 E. Walker 2023 action of spindle breaker 55 guide for gravity stamps 154, 155 air versus water concentration 825 ore feeders at Mill 100 1624 arrastra 238 table 1506 Collom jig 514 Across the San Juan Mountains. T. A. Rickard . 1923 concentration over smelting 1 Action of air jig 822 electric power 1091 belt tables 698 Elmore oil process 832 breakers compared 55 filter-pressing plants as against decantation buddies 704 plants 1646, 1647 bumping belt tables 669 flat mill site 1086 tables 682 gravity stamps 222 centrifugal force 827 hand breaking 12 classifiers 387 hand jigs 892 crushing machines 300 hand picking 480, 487 Gates breaker 39 hehcoid conveyor over older types 1582 gravity stamps 144 high-speed rolls 88 jaw breakers 36 large breakers 49 194228 Pages 1-643, Vol. I. ORE DRESSING. Pages 644-1197, Vol. II. Advantages of 1-arge motors 1092 Albertite, specific gravity of 1188 machine feeding 1115 Albite, specific gravity of 1188 magnetic concentration 1053 Alburtis, Pennsylvania, mill at 1055 mercury wells 771 Alden breaker 59, 61 Muntz metal plates 750 Alexandria Coal Co., washing plant 1178 Parsons & Fisher jig 518 Alice mill 1134 picking in the mine 481 Alignment of rolls 71 pipe and plug jig spigot 527 Alkali to prevent sickening of mercury 751 removing dust before washing coal 817 Allard coal washing methods 2018 riffle tables 679 Alleghany Iron Co 809 rock breaker at mine 1109 Allegheny Ore and Iron Company, McLanahan and rolls of large diameter 83 Stone single-roll crusher at 1241 sectional mills 1108 Allen, Robert, West Australia metallurgical practice 1323 separate treatment of mine fines 1111 Allevard, calcining for friability 9 side hill site for mills 1085 hand picking at 492 silver combination mills 1040 magnetic separation at 834 silver-plated amalgamated plates 748 mill at 1178 skimming jigs 577 picking at 487 sliding block mechanism 535 roasting for friability at 58 A-frames for gravity stamps 157, 158 magnetism at 814 Africa, milling at the Simmer & Jack, G. O. sizes of ore hand picked at 487 Swart 2035 Allis, E. P., Co., amalgamating pan . 243, 244, 245, 246, stamp mill practice in, F. C. Roberts 2044 247, 249 Agassiz, A. viii clean-up pan 251 Aggregation affecting separation 889 edge runner mill 270 of minerals, effect of 3 mechanical batea 683 Agitation . 892, 1611 on design of cams 197 after sizing or sorting 891 stamp tappets 189 in kieves 726 patent cams 194 ratio on vanners 665 mortar 228 stamp ' use made of, in mills 890 Allis, E. P., on shoe shanks 181 for bottle tests 1157 bosses 187 Agitator ^ stamp Agitators for amalgamation 780 stems 187 lor clay 1076 rolls 76, 111 Ahun Colliery, Carr disintegrator at 284 at Mill 136 . 1737, 1738 Aikinite, specific gravity of 1188 Air blast, continuous 816 Allis-Chalmers Company, an improved trommel 1360 dry blanket 825 annular picking table .... 1435 panning 825 Ayton thick-pulp extractor 1408 for emery 1079 ball mills, regards work, cost, etc. 2016 graphite 1075 Challenge feeder 1577 Hochstedt apparatus 816 clean-up pans at Mill 100 1625 on horizontal belt 818 corrugated rolls 1242 bubbles affecting separation 890 costs of breaking ore 1222 effect of 4 Frue vanners at Mill 127 1711, 1712 on free settling 464 Mill 170 1868 classifier at Engis 817 Gates ore breakers 1222 concentration, bibliography for 837 rock and ore breakers 1222 by 815 tube and ball mills . 1323 concentrators, classification of 816 mill 1296 using centrifugal force 818 Hancock jig 1440, 1459 continuous blast 816 improved Wolf-Tongue classifier 1387 gaps, ampere turns required for 795 Lamb automatic tailings sampler 1574, 1809 hoists, Pilling 1608 Richards' shallow-pocket hindered-settling clas- jigs 640, 816, 820 sifier 1384 Hooper-Paddock 820 rolls 1137, 1244 Krom 824 at mills 1707, 1724, 1750, 1751, 1752, 1854, pressure and gravity jig mechanism 537 1866, 1867, 1877, 1878, 1885, 1898, 1913 separator, Clarkson-Stanfield 820, 828 simple steam stamp at Mill 182 1909 Mumford & Moodie 818 single-cylinder steam stamp 1256 Pape-Henneberg 818, 828 stamps at Mill 100 1624 settling, use made of, in mills 889 steam stamp 201 1 suction used in asbestos dressing 817 suspended frame vanner 1503 versus water for concentration 825 testing screens 1 138 Aitken, R. M., stamp mill construction 2048 toothed rolls . 1242 Akens & Evans slimer, the 1500, 2022 vanners at Mill 136 1739 Akins Si Evans concentrator 2023 Allis Corliss engine 994, 997, 1000 Akron Chili mill 1307 pump 994, 997, 1000, 1003 table of sizes, capacities, speeds, weights, etc. 1308 reliance rolls 82 Aktien Company, new mill of 1924 steam stamp 114, 116, 118, 119, 120, 121, Alabama graphite mills 1075 122, 123, 124, 125, 126, 127, 128 131, 133, 142 hematite, cost of concentrating 1135 valve motion 124 ores roasted for magnetism 814 Allison Rand mine 2044 iron ore concentration 1176 Allouez Copper mine, hand picking at 492 magnetic concentration of 833, 835, 836 mill 1089, 1107, 1109, 1174 washing in 1 180 cost of stamping 142 Alaska, cost of producing gold in 1975, 1976, 1977 steam stamps 120 dredging in 1009 Alma Emmons sludge mill xxv, 902 mill at Island 2039 DeLaval 827 stamp practice Douglas ' Alpha separator Treadwell Gold Mining Co 1181 Alsing Company, the J. R. driers 1597, 1609 amalgam squeezer used by 781 tube mills 1323 mill 1127, 1133, 2037, 2042 cylinder 234, 266 costs and output at the 2048 bibliography of 294 R. A. Kinzie . descriptions of, ; 2033 tube mill 1280, 1294 heavy stamps '. 220 table of sizes, power, etc 1296 H. Watson 2043 Altenberg classifier 416, 475, 478 mortar blocks 148 mine, wash trommel at 331 Albany compound for greasing guides 156 Saxony, calcining ore for friability at 9 grease 1098 mill at 1086, 1173 Pages 1199-1610, Vol. III. INDEX. Pages 1611-2052, Vol. IV. 798 dies Alternate polarity in magnetic separation Amalgamating pan ........... 245 Alternating current in magnetic separation 835 E. P. Allis Co........... 244, 245, 246, 247, 249 Althans, E., Ball stamp 143 for testing ......................... .... 1 157 Blake, Marsden and Alden breakers 61 pan, frame, bottom, and central cone ....... 241 buddies, slime, and percussion tables 729 Fraser & Chalmers ...... 244, 245, 246, 247, 249 Dingey mill 293 in Lyon mill .................. 241, 243, 244, 246 German and California stamps 230 loss of mercury in ....................... 250 Krom jig 839 method of working ...................... 248 Krom's rolls and coal rolls 112 power, wear, losses of iron and mercury ...
Recommended publications
  • Oral Presentations
    Differences in in vitro sensitivity and accumulation of anthelmintics in Trichuris suis and Oesophagostomum dentatum Congress on Tropical Medicine and International Health and 5th Conference of the Scandinavian-Baltic Society for Parasitology sep. 10 2013 - sep. 13 2013 Danmark Hansen, Tina Vicky Alstrup; Nejsum, Peter; Friis, Christian; Olsen, Annette; Thamsborg, Stig Milan Publication date: 2013 Document version Early version, also known as pre-print Citation for published version (APA): Hansen, T. V. A., Nejsum, P., Friis, C., Olsen, A., & Thamsborg, S. M. (2013). Differences in in vitro sensitivity and accumulation of anthelmintics in Trichuris suis and Oesophagostomum dentatum: Congress on Tropical Medicine and International Health and 5th Conference of the Scandinavian-Baltic Society for Parasitology sep. 10 2013 - sep. 13 2013 Danmark. Abstract from Congress on Tropical Medicine and International Health and 5th Conference of the Scandinavian-Baltic Society for Parasitology, Denmark. Download date: 28. Sep. 2021 Tropical Medicine and International Health volume 18 suppl 1 pp 52–107 september 2013 Oral Presentations Track 1: Infectious Diseases 1.2 Control of Neglected Zoonotic Diseases using a One Health approach 1.1 Non malarial febrile illness: challenges Control of Neglected Zoonoses using a in epidemiology, diagnosis and treatment One Health approach O.1.1.001 O.1.2.001 Why do health workers give antimalarials to RDT-negative A narrative of the neglected zoonotic diseases through the patients? A qualitative study of factors affecting provider course of the World Health Assembly decision making at rural health facilities in Uganda H. Mableson1, K. Picozzi1 and S. Welburn1,2 R. Altaras1, A. Nuwa1, A.
    [Show full text]
  • Artisanal and Small-Scale Gold Mining
    GUIDANCE DOCUMENT Developing a National Action Plan to Reduce, and Where Feasible, Eliminate Mercury Use in Artisanal and Small Scale Gold Mining Working Draft August 17, 2015 Foreword The Minamata Convention on Mercury, opened for signature in October 2013 in Japan, creates a blueprint for actions to protect human health and the environment from anthropogenic emissions and releases of mercury and mercury compounds. Article 7 of the Minamata Convention addresses the largest anthropogenic source of mercury pollution, artisanal and small scale gold mining (ASGM). Under Article 7, countries where mercury is used in ASGM are required to take steps to reduce and, where feasible, eliminate the use of mercury. Because the ASGM sector is closely tied to complex economic development and poverty issues, the Convention allows flexible, country-specific solutions through the development of an ASGM National Action Plan (NAP). Although each country’s NAP process will be unique, Annex C of the Minamata Convention provides a list of elements that must be included in each NAP. This document represents an expansion of the UNEP’s Guidance Document: Developing a National Strategic Plan to Reduce Mercury Use in Artisanal and Small Scale Gold Mining (UNEP 2011), and is intended to reflect Convention obligation and other advances in understanding of the ASGM sector. This document provides guidance to countries in formulating NAPs that are compliant with the requirements of the Minamata Convention, and provides technical, legal and policy information on issues related to ASGM, which can be useful when preparing and implementing the NAP. Although the use of this guidance is not a requirement under the Minamata Convention, this guidance is intended to assist countries with the preparation of their NAPs.
    [Show full text]
  • Correspondence. the Concentration and Sizing Of
    90 DISCCSSIO-U ON SIZING OF CRUSHED NIBEEhLS. [Minutes Of Mr. Commans. Au!hor, when speaking of the digiculty of screening particles less than l& to 1 nlillimetre in diameter, was referring to screening in a wet condition, as commonly was the case with ore, and did not intend to referto thescreening or sieving of drymaterial, as Mr. J. H. Saunderson would seem to suppose. On the other hand, undoubtedly, even withdry material, a difficulty wasoften experienced with fine sieves of the meshes getting choked ; and if that was obviated in themachine referred to byMr. Saunderson, it was certainlya step in the right direction. With Mr. Garland's remarks about the jigger bottom having a forward inclination, he quite agreed. That plan should never be adopted, and whatever fall was required toassist the movement of the ore shouldbe obtained by slightly lowering each successive sieve, or the depth of the bedding, the sieves themselves remaining horizontal. Correspondence. JIr. Bartsch. Mr. W. J. BARTSCH,of Siegen,supplemented theAuthor's description by some details of results obtained with the Bartsch concentrator. As wouldbe seen from Figs. 45, that appliance consisted of a convex circular table carried at the centre on a bearing b, and at the circumference by rollers c. Radial blows were imparted by a cam f, and the slime and wash-water dis- tributors revolved over thetable, the main water-pipe being bent in a parabolic curve. The usual diameter of the table was 134 feet. For every 30 revolutions of the shaft, 120 bumps were imparted to the table, in which time(one minute) the distributors made half a revolution of the table.
    [Show full text]
  • Proceedings of the Ninth Annual Alaska Conference on Placer Mining
    PROCEEDINGS OF THE NINTH ANNUAL ALASKA CONFERENCE ON PLACER MINING 'PLACER MINING - JOBS FOR ALASKA" MARCH 18-25. 1987 Compiled by Mary Albanese and Bruce Campbell Prom cover: Tlra Colomdo Creek mammoth skull being wmpped In 0 plaallc jacket in prepamrlon lor rhbment lo the LiAF Jlureurn. Photo rourtrJv Uniuerrity 01 Alarka Mureum. SPONSORED BY Placer Miners of Alaska Alaska Miners Association Alaska Women in Mining - Mining Advocacy Council ORGANIZING COMMITTEE Gail Ackles,,...... ................... Circle Mining District Mary Albanese.. .......................Alaska DivlsFon of Geological and Geophysical Surveys Lela Bouton ...........................Koyukuk Mining District Roger Burggraf ........................Fairbanks Mining District Jeff Burton ...........................Tanana Valley Community College Bruce Campbell ........................Special Technical Assistant Karen Clautice ........................ Alaska Division of Geological and Geophysical Surveys Judy Geraghty livengood- good-Toovaa Mining District Kathy Gaff........... .................Alaeka Miners Association Charles Green .........................Alaska Division of Mnerals and Forest Products Brent Aamil ...........................University of Alaska Jim Madonna ........................... University of Alaska Rose Rybachek .........................Alaska Miners Association Rosalyn Stowell ....................... Alaska Women in Mining Mary-Lou Teal., ....................... Alaska Women in Mining Dan Walsh...... .......................University of Alaska,
    [Show full text]
  • Copper Worldwide Vol 7 No 1 Jan-Feb 2017
    JANUARY/FEBRUARY 2017 VOLUME 7 | 1 See Buyers Guide pp26-27 n Key Words: Innovation and sustainability n News: Głogów Smelter Kamoa-Kakula More copper mined Project issues n Smelting features: Converting (2 of 3) Two-step method at Dongying n Spotlight: Electrorefining progress UMMC n Optimisation: A 4-step process n Copper in Germany: Jonathan Barnes on Europe’s copper major n Copper semis: Producers and capacity survey n Events: 30th Intl Copper 16th World Copper Conference Copper/Cobre 2016 Coming up in 2017 n Contracts: Outotec re-orders Toquepala Steerhorn Chuquicamata n Buyers Guide - In search of added value ISSN 2046-9438 www.copperworldwide.com www.copperworldwide.com CONTENTS | 1 We transform … Key Words the world of copper 3 Innovation and sustainability News Kamoa-Kakula progress; Rise in mined 4 copper; Głogów starts up flash furnace; Project acceptance study; IWCC Technical Seminars; MIDAS undersea research results; The MD issue around commissioning; MKM into e-mobility; Market in surplus; Aurubis update; Glencore knowhow; Peru output Spotlight Electrometallurgy 2016 review; 6 UMMC tankhouse Contracts & People Outotec re-ordering and Toquepala 20 contract; Steerhorn cathodes; Gas management in France; Iran and Indonesia The Głogów Copper Smelter (see page 5) items; Chuquicamata acid plants ordered; Copper crucible restoration Inside this issue ELECTROREFINING/ 16TH WORLD ELECTROWINNING COPPER CONFERENCE The SX-EW cost burden; G Corner top Preview and latest CRU analysis 9 in refining; Dias d’Ávila milestone; 19 Ion exchange processing SAFETY AND Copper working process – from the melting bath to the fi nal product PLANT INTEGRATION MAINTENANCE AND CONTROL Stories relating to these SMS group has been active in the copper fi eld for more Our integrated solutions are a byword for robust and reli- Optimisation of control systems via the two key operational areas than 50 years.
    [Show full text]
  • The Metallurgy of Lead & Silver
    BOUGHT WITH THE INCOME FROM THE SAGE ENDOWMENT FUND THE GIFT OF ^.. Henrg W. Sage 1891 AdSJu -L 'i.j.kj.m^. * Cornell University Library The original of tiiis book is in tine Cornell University Library. There are no known copyright restrictions in the United States on the use of the text. http://www.archive.org/details/cu31924004582619 THE METALLURGY OF LEAD AND SILVER. ^^7^12)4(0 GRIFFIN'S METALLURGICAL, SERIES. EDITED BY SiK W. C. ROBERTS-AUSTEN, K.C.B., F.R.S., D.C.L., Chemist and Assayer o/the Royal Mint; Professor ofMetallurgy in the Boyai College of Science. In Large 8to, Handsome Cloth. With Illustrations. Fourth Sdition, Revised and Enlarged. 15s. INTRODUCTION TO THE STUDY OF METALLURGY. BY SIK W. C. ROBEBTS-AUSTEN. With additional Illustrations and Micro-Photographic Plates of Different Varieties of Steel. " No English text-hook at all approaches this in the completeness with which the most modem views on the subject are dealt with. Professor Austen's vnlume will be ikvaluable."—Cft«m. JVeiw.?. Third Edition. 21s. rrxxE: GOX^X*. BY T. KIBKE KOSB, D.SC, Assist. Assayer of the Royal Mint. Thoroughly Revised, Enlarged, and partly Re-written. Including the most recent Improvements in the Cyanide Process. With new Frontispiece and additional Illustrations. "A contribution to Metallurgical Literature of classical value."—iVaiure. In Two Volumes, Each Complete in itself. By H. F. COLLINS, ASSOO.R.S.M., M.lNST.M.M. ' Part I.— LKAD. 16s. Part II.—SILVER. A Complete and Exhaustive Treatise on Comprising Details Regarding the THE MANTJFACTTTRE OF LEAD, SOURCES AND TREATMENT OF SILVER ORES, WITH SECTIONS ON TOGETHER WITH nSSCRIPTIONS OP SMELTING AND DESILVBRISATION, PLANT, MACHINERY, AND PROCESSES OF MANHFACTURE, And Chapters on the Assay and Analysis of the Materials Involved.
    [Show full text]
  • Non-Renewable Resources Curriculum
    DOCUMENT RESUME ED 322 354 CE 055 476 TITLE Non-Renewable Resomrces Curriculum. INSTITUTION Alaska State Dept. of Education, Juneau. Div. of Adult and Vocational Education. PUB DATE 88 NOTE 80p. PUB TYPE Guides - Classroom Use - Guides (For Teachers) (052) EDRS PRICE MF01/PC04 Plus Postage. DESCRIPTORS Citizenship; Competency Based Education; Curriculum Development; Educational Objectives; Employment Qualifications; *Entry Workers; *Fuels; Leadership; *Mining; *Natural Resources; *Occupational Information; Postsecondary Education; Secondary Education; *State Curriculum Guides; Vocational Education IDENTIFIERS *Alaska ABSTRACT This document is designed to help teachers and administrators in Alaska develop secondary and postsecondary training in nonrenewable natural resources. Its competencies reflect those needed for entry-level employment in the following industriesas identified by international businesses surveyed in Alaska:gas and petroleum, coal, placer, and underground mining. Section 1introduces the concept of competency-based curriculum and the role of vocational educators in curriculum planning, in_lementation, and evaluation. Section 2 describes the scope and sequence of nonrenewable natural resource competencies. Section 3 presents basic and advanced competencies and accompanying tasks in leadership and ritizenship, introduction to nonrenewable natural resources, gas and petroleum, and mining. Section 4 contains four course descriptions that provide a framework for the design and implementation of a balancedprogram in nonrenewable
    [Show full text]
  • Exploitation Strategic Plan and Business Model - Final
    Exploitation strategic plan and business model - final Deliverable 8.4 © Copyright 2019 The INTMET Consortium Project Funded by the European Commission under the Horizon 2020 Framework Programme. Grant Agreement No 689515 EXPLOITATION PLAN-FINAL D8.4 PROGRAMME H2020 – Environment and Resources GRANT AGREEMENT NUMBER 689515 PROJECT ACRONYM INTMET DOCUMENT Deliverable 8.4 TYPE (DISTRIBUTION LEVEL) ☒ Public ☐ Confidential ☐ Restricted DUE DELIVERY DATE M36 DATE OF DELIVERY January 31 2019 STATUS AND VERSION NUMBER OF PAGES WP / TASK RELATED WP 8, task 8.4, 8.5 WP / TASK RESPONSIBLE MinPol AUTHOR (S) Prof. Dr. Horst Hejny, Dr. Angelika Brechelmacher, Prof. Dr. Günter Tiess PARTNER(S) CONTRIBUTING FILE NAME Exploitation strategic plan and business model - final DOCUMENT HISTORY VERS ISSUE DATE CONTENT AND CHANGES 1.0 30/01/2019 First Revision 1.1 31/01/2019 Small corrections ClC final 31/01/2019 for submission DOCUMENT APPROVERS PARTNER APPROVER CLC Francisco Sánchez 2 | 34 EXPLOITATION PLAN-FINAL D8.4 TABLE OF CONTENTS 1. PURPOSE ............................................................................................................................................................................................... 6 2. BUSINESS MODEL .................................................................................................................................................................................. 7 2.1 BASIC IDEA ...............................................................................................................................................................................................
    [Show full text]
  • An Archaeologist's Guide to Mining Terminology
    AUSTRALASIAN HISTORICAL ARCHAEOLOGY, I5, I997 An Archaeologist'sGuide to Mining Terminology Ited 5as NEVILLEA. RITCHIEAND RAY HOOKER ing Iter the The authors present a glossary of mining terminology commonly used in Australia and New Zealand. The npl definitions and useagescome from historical and contemporary sources and consideration is given to those most frequently encounteredby archaeologists. The terms relate to alluvial mining, hard rock mining, ore rlll9 processing,and coal mining. rng. the \on resultantmodified landforms and relicswhich arelikely to be rnd Thereare literally thousandsof scientificand technicalterms ,of which have been coined to describevarious aspects of the encounteredby or to be of relevanceto field archaeologists processing metalliferousand non-metallic ores. working in mining regionsparticularly in New Zealandbut 1,raS miningand of M. Manyterms have a wide varietyof acceptedmeanings, or their also in the wider Australasia.Significant examples, regional :of meaningshave changed over time. Otherterms which usedto variants,the dateof introductionof technologicalinnovations, trrng be widely used(e.g. those associated with sluice-mining)are and specificallyNew 7na\andusages are also noted.Related Ito seldom used today. The use of some terms is limited to terms and terms which are defined elsewherein the text are nial restrictedmining localities (often arising from Comish or printedin italics. other ethnic mining slang),or they are usedin a sensethat While many of the terms will be familiar to Australian differsfrom thenorm; for instance,Henderson noted a number ella archaeologists,the authorshave not specificallyexamined' v)7 of local variantswhile working in minesat Reeftonon the Australian historical mining literature nor attempted to WestCoast of New T.ealand.l nla.
    [Show full text]
  • Recovery of Hematite from Fluorspar Tailings Using Reverse Cationic Flotation
    COPYRIGHT AND CITATION CONSIDERATIONS FOR THIS THESIS/ DISSERTATION o Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. o NonCommercial — You may not use the material for commercial purposes. o ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. How to cite this thesis Surname, Initial(s). (2012) Title of the thesis or dissertation. PhD. (Chemistry)/ M.Sc. (Physics)/ M.A. (Philosophy)/M.Com. (Finance) etc. [Unpublished]: University of Johannesburg. Retrieved from: https://ujcontent.uj.ac.za/vital/access/manager/Index?site_name=Research%20Output (Accessed: Date). Recovery of hematite from fluorspar tailings using reverse cationic flotation By Thembelihle Portia Lubisi A Master’s Research dissertation submitted in fulfilment of the requirements for the degree of Magister technologiae in Chemical Engineering in the Faculty of Engineering and the Built Environment at the UNIVERSITY OF JOHANNESBURG SUPERVISOR: Dr Willie Nheta CO-SUPERVISOR: Prof Freeman Ntuli 22 February 2017 Dedication This thesis is dedicated to my loving husband. I am grateful for his support throughout the project. I thank him for his continuous understanding and listening to me on my frustration days, my overenthusiastic days and everything in between. I thank my helper for taking care of my children when I came home late and exhausted. I thank my sister for her continuous encouragement, ensuring I don’t quit.
    [Show full text]
  • Scavenging Flotation Tailings Using a Continuous Centrifugal Gravity Concentrator
    Scavenging Flotation Tailings using a Continuous Centrifugal Gravity Concentrator by Hassan Ghaffari B.A.Sc. & M.A.Sc. Department of Mining Engineering, Technical Faculty Tehran University, Iran, 1990 A THESIS SUBMITTED IN PARTIAL FULFILMENT OF THE REQUIREMENTS FOR THE DEGREE OF Master of Applied Science in THE FACULTY OF GRADUATE STUDIES DEPARTMENT OF MINING ENGINEERIG THE UNIVERSITY OF BRITISH COLUMBIA We accepted this thesis as conforming to the required standard THE UNIVERSITY OF BRITISH COLUMBIA August 2004 © Hassan Ghaffari, 2004 THE UNIVERSITY OF BRITISH COLUMBIA FACULTY OF GRADUATE STUDIES Library Authorization In presenting this thesis in partial fulfillment of the requirements for an advanced degree at the University of British Columbia, I agree that the Library shall make it freely available for reference and study. I further agree that permission for extensive copying of this thesis for scholarly purposes may be granted by the head of my department or by his or her representatives. It is understood that copying or publication of this thesis for financial gain shall not be allowed without my written permission. H ASS A A/ GrMFFAR I 31 ,o%2t>4 Name of Author (please print) Date (dd/mm/yyyy) Title of Thesis: Degree: /l/l-A S C Year: Department of The University of British Columbiumbia ^ u c/ Vancouver, BC Canada grad.ubc.ca/forms/?formlD=THS page 1 of 1 last updated: 31-Aug-04 11 Summary A study was conducted to evaluate the Knelson Continuous Variable Discharge (CVD) concentrator as a scavenger for coarse middling particles from flotation tailings. The goal was to recover a product of suitable grade for recycling to the grinding circuit to improve liberation and aid subsequent recovery in flotation.
    [Show full text]
  • National Register of Historic Places Registration Form
    NPS Form 10-900 OMB No. 1024-0018 United States Department of the Interior National Park Service National Register of Historic Places Registration Form This form is for use in nominating or requesting determinations for individual properties and districts. See instructions in National Register Bulletin, How to Complete the National Register of Historic Places Registration Form. If any item does not apply to the property being documented, enter "N/A" for "not applicable." For functions, architectural classification, materials, and areas of significance, enter only categories and subcategories from the instructions. 1. Name of Property Historic name: Ute-Ulay Mine and Mill Other names/site number: 5HN.77 Name of related multiple property listing: The Mining Industry in Colorado; Hinsdale County Metal Mining (Enter "N/A" if property is not part of a multiple property listing ____________________________________________________________________________ 2. Location Street & number: County Road 20 City or town: Lake City State: Colorado County: Hinsdale Not For Publication: n/a Vicinity: X ____________________________________________________________________________ 3. State/Federal Agency Certification As the designated authority under the National Historic Preservation Act, as amended, I hereby certify that this X nomination ___ request for determination of eligibility meets the documentation standards for registering properties in the National Register of Historic Places and meets the procedural and professional requirements set forth in 36
    [Show full text]