Upholsterer Level 1

Total Page:16

File Type:pdf, Size:1020Kb

Upholsterer Level 1 7/27/2019 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 Upholsterer Level 1 Q 1) Which among the following material is used to make artificial leather?\कृ िम चमड़ा की उादन म िन म से िकस का योग िकया जाता है? 1) Polyurethane\ पॉिलयूरथेन 2) Nylon\नायलॉन 3) Rayon\रेयान 4) Acrylic\ऐे िलक Q 2) Which among the following material is more abrasion resistance than Hessian?\िन म हेयन से भी अिधक घषण ितरोधी ा है? 1) Jute\पटसन 2) Cotton\कपास 3) Silk\रेशम 4) All of above\उपरो सभी Q 3) Which among the following term is used to refer to the process of tightly stretching the fabric over the wooden frame?\लकड़ी का चौखटे पर कपडे को मज़बूती से खीचनं े की िया को िकस नाम से जाना जाता है? 1) Stretching\ेिचंग 2) Tauting\टाउिटंग 3) Webbing\वेबिबंग 4) Pulling\पुंग Q 4) Which among the following tool is used to stretch the fabric tight before final assembly?\कपड़े को अंितम िफिटंग से पहले मज़बूती से खीचनं े के िलए िन म से िकस उपकरण का योग िकया जाता है? 1) Stretcher Pliers\ेच ायस 2) Groove Pliers\ूव ायस 3) Diagonal Pliers\डायगोनल ायस 4) Locking Pliers\लॉिकं ग ायस Q 5) How many folds are provided to fabric before attaching to wooden frame while making a bed?\लकड़ी के ढांचे पर कपड़े को लगाने से पहले िकतने बार मोड़ा जाता है? 1) 1\1 2) 2\2 3) 3\3 4) 4\4 Q 6) Which among the most popular means used to attach fabric onto wooden frame in traditional furniture s?\परंपरागत असबाब पे कपड़े को लगाने के िलए िन म से िकस का योग िकया जाता था? 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 1/28 7/27/2019 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 1) Fevicol\फे िवकोल 2) Nails\कील 3) Screws\पेच 4) Stitching\िसलाई Q 7) Which among the following cannot be built using Upholstery?\असबाब की िया से िन म से कौनसी वाु नही ं बना सकते है? 1) Sofa\सोफ़ा 2) Bed\खाट 3) Chair\कु रसी 4) Table\मेज Q 8) Which among the following fabric has properties similar to wool? \िन म से िकस कपड़े म ऊन जैसे गुण है? 1) Acrylic\ऐे िलक 2) Rayon \रेयान 3) Cotton\कपास 4) Hessian\हेयन Q 9) Which among the following fabric should be used in case of such furniture s where people will be seated for extended period of time?\यिद ली व तक इंसान को बैठना हो तो िन म से िकस कपड़े का उपयोग करना चािहए? 1) Rayon \रेयान 2) Cotton\कपास 3) Leather\चमड़ा 4) Wool\ऊन Q 10) Which among the following combination of fabrics is not desirable?\िन म से िकन कपड़ो की संयोजन योग नही ं करना चािहए? 1) Wool and Polyester\ऊन और पॉिलएर 2) Wool and Cotton\ऊन और कपास 3) Cotton and Polyester\कपास और पॉिलएर 4) Polyester and Acrylic\पॉिलएर और ऐे िलक Q 11) Which among the following is used to make Velvet fabric?\मख़मल कपड़ा बनाने के िलए िन म से िकसका योग िकया जाता है? 1) Cotton \ कपास 2) Hessian\हेयन 3) Silk \रेशम 4) Nylon\नायलॉन Q 12) Which among the following material is used to make Velveteen?\नकली मख़मली कपड़ा बनाने के िलए िन म से कौनसा पदाथ यु िकया जाता है? 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 2/28 7/27/2019 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 1) Cotton \ कपास 2) Silk \रेशम 3) Wool\ऊन 4) Hessian\हेयन Q 13) Which among the following is used to absorb shocks and impact in a sofa?\सोफे म झटके अवशोिषत करने के िलए ा उपयोग करते है? 1) Springs\ं 2) Cushion\मसनद 3) Suspension\सेशन 4) Supports\सहारा Q 14) Upto what length is the flat head upholstery nail inserted into a wooden frame?\कील को लकड़ी की ढांचे म िकतनी गहराई तक लगाया जाता है? 1) 1/2 length \ 1/2 लाई 2) 2/5 length\ 2/5 लाई 3) 3/4 length \ 3/4 लाई 4) 1/4 length\ 1/4 लाई Q 15) Which among the following is not an engineered wood?\िन म से कौनसी िमित लकड़ी नही ं है? 1) Plywood\तहदार लकड़ी 2) MDF\एमडीएफ 3) Laminated Veneer\परतदार लकड़ी 4) Bended Bamboo\मुड़ा आ बांस Q 16) Which among the following wood has dense black hard appearance?\िन म से िकस लकड़ी की सघन काली स िदखावट होती है? 1) Ebony\आबनूस 2) Sheesham\शीशम 3) Teak\टीक 4) Deodar\देवदार Q 17) How many types of Upholstery Trims are generally available?\असबाब के िट िकतने कार के होते है? 1) 7\7 2) 5\5 3) 10\10 4) 15\15 Q 18) For which among the given upholstery trims do we use the following component? \िन म से िकस असबाब के िट नीचे िदए गए अंग का योग करते है ? 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 3/28 7/27/2019 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 1) Piping trim\पाइिपंग िट म 2) Eyelet Trim\आयेलेट िट म 3) Rickrack trim\रकरक िट म 4) Pom Pom Fringe Trim\पोम पोम िं ज िट म Q 19) Which among the following type of trims are used in sofas?\सोफे म िन म से िकस िट म की उपयोग िकया जाता है ? 1) Piping trim\पाइिपंग िट म 2) Tussel Trims\तुेल िट म 3) Fringe Trims\िं ज िट 4) Flat Braid Trims\ैट ैड िट Q 20) Which among the following is not a type of Upholstery Trim?/िन म से कौनसा असबाब के िट का कार नही ं है? 1) Pom Pom Fringe Trim\पोम पोम िं ज िट म 2) Rickrack trim\रकरक िट म 3) Tussel Trims\तुेल िट म 4) Reverse Trim\रवस िट Q 21) Which among the following is used to secure the upholstery on the frame?\असबाब को ढांचे म लगाने के िलए िन म से िकस का योग िकया जाता है? 1) Screws\ू 2) Nails\कील 3) Tacks\टांका 4) Rivets\कीलक Q 22) Which among the following is used in Upholstery?\असबाब की िनमाण म िन म से िकस का योग िकया जाता है ? 1) Hammer\हथोड़ा 2) Plier\येर 3) Wrench\पाना 4) Screw Driver\पचकस Q 23) Which among the following is not made using Upholstery process?\असबाब िया से िन से ा िनमाण नही ं िकया जाता है ? 1) Dining Table\खाने की मेज 2) Sofa\सोफा 3) Cot\खिटया 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 4/28 7/27/2019 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 4) All of above\उपरो सभी Q 24) Which among the following is a substitute for linen?\िन म से छालटी का िवक ा है? 1) Rayon \रेयान 2) Velvet\मख़मली 3) Chenille\सेनील 4) Silk \रेशम Q 25) Which among the following fabric has piling problems with wool?\िन म से कौन ऊन के साथ टाल नही ं लगाया जा सकता? 1) Rayon 2) Hessian 3) Polyester 4) Velvet Q 26) Which among the following fiber is artificially made using cellulose?\िन म से कौनसी वाु कोिशकारस से बनाई जाती है? 1) Polyurethane\पॉिलयूरथेन 2) Nylon\नायलॉन 3) Rayon\रेयान 4) Acrylic\ऐे िलक Q 27) Which among the following is also used in industries apart from upholstery?\िन म से असबाब के अितर उोगो ं म भी िकसका योग िकया जाता है? 1) Jute\पटसन 2) Cotton\कपास 3) Silk\रेशम 4) All of these\ये सभी Q 28) Which among the following process is done to fabric first?\कपड़े पर िन म से िकस िकया को पहले िकया जाता है? 1) Stretching\ेिचंग 2) Tauting\टाउिटंग 3) Webbing\वेबिबंग 4) Pulling\पुंग Q 29) Which among the following is used while manufacturing irregular shaped upholstery? \टेड़े असबाब की िनिमित म िन म से िकस का योग िकया जाता है? 1) Stretcher Pliersेच ायस 2) Groove Pliers\ूव ायस 3) Diagonal Pliers\डायगोनल ायस 4) Locking Pliers\लॉिकं ग ायस 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 5/28 7/27/2019 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 Q 30) What is the minimum number of sides to form a rigid frame?\कड़ा े म बनाने के िलए ूनतम िकतने भाग होने चािहए? 1) 1\1 2) 2\2 3) 3\3 4) 4\4 Q 31) Which among the following is used to hold together leather in automobile seats? \मोटर-गाड़ी के सीट म चमड़ा को बंधे रखने के िलए िन म से िकस का योग करते है? 1) Fevicol\फे िवकोल 2) Nails\कील 3) Screws\पेच 4) Stitching\िसलाई Q 32) Which among the following can be built using Upholstery?\असबाब की िया से िन म से कौनसी वाु बनाया जा सकते है? 1) Sofa\सोफ़ा 2) Bed\खाट 3) Cushion\मसनद 4) All of these\ये सभी Q 33) Which among the following fabric has properties similar to jute? \िन म से िकस कपड़े म पटसन जैसे गुण है? 1) Acrylic\ऐे िलक 2) Rayon \रेयान 3) Cotton\कपास 4) Hessian\हेयन Q 34) Which among the following is used to make luxury upholstery?\िन म से िकस का उपयोग िवलास असबाब साधन बनाने म िकया जाता है? 1) Rayon \रेयान 2) Cotton\कपास 3) Leather\चमड़ा 4) Wool\ऊन Q 35) Which among the following pair represents synthetic fabrics?\िन म से कौनसा जोड़ा कृ िम कपड़े को िनिपत करता है? 1) Wool and Polyester\ऊन और पॉिलएर 2) Wool and Cotton\ऊन और कपास 3) Cotton and Polyester\कपास और पॉिलएर 4) Polyester and Acrylic\पॉिलएर और ऐे िलक Q 36) Which among the following fabric has high tensile strength?\िन म से िकस म तता ताकत अिधक होता है? 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 6/28 7/27/2019 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 1) Cotton \ कपास 2) Hessian\हेयन 3) Silk \रेशम 4) Nylon\नायलॉन Q 37) Which among the following fabric is obtained from animal source?\िन म से कौनसा कपड़ा पशु ोत से पाया जाता है? 1) Cotton \ कपास 2) Silk \रेशम 3) Wool\ऊन 4) Hessian\हेयन Q 38) Which among the following is used to keep hands comfortably ?\हाथो को आराम से रखने के िलए िन म से िकसका योग िकया जाता है? 1) Springs\ं 2) Cushion\मसनद 3) Suspension\सेशन 4) Supports\सहारा Q 39) What is the standard size of nails used in furniture s in India?\भारत म असबाब िनमाण म िन म से िकस कार के कील का योग िकया जाता है? 1) 1/2 length \ 1/2 लाई 2) 2/5 length\ 2/5 लाई 3) 3/4 length \ 3/4 लाई 4) 1/4 length\ 1/4 लाई Q 40) Which among the following is purely natural?\िन म से कौनसा िवशु प से ाकृ ितक है? 1) Plywood\तहदार लकड़ी 2) MDF\MDF 3) Laminated Veneer\परतदार लकड़ी 4) Bended Bamboo\मुड़ा आ बांस Q 41) What should be your first concern at the scene where a person has been seriously burned?/उस पर म आपकी पहली िचंता ा होनी चािहए जब कोई गंभीर प से जल गया हो? 1) Checking the scene for safety/सुरा के िलए पर की जांच करना 2) Checking the victims breathing and pulse/पीिड़तो ं को सांस और न की जांच करना 3) Calling your local emergency phone number/अपने थानीय आपातकालीन फोन नंबर पर कॉल करना 4) Cooling the burned area/जले ए े को ठं डा करना Q 42) A saw with larger teeth (fewer teeth per inch) for cutting with the grain of wood/ का 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 ै 7/28 7/27/2019 10.6.60.71:8080/qbexcel/admin/Download.aspx?id=86 फलक सिहत लकड़ी को काटने
Recommended publications
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Level 2 Award/Certificate/ Diploma in Creative Techniques - Interiors (7157)
    Level 2 Award/Certificate/ Diploma in Creative Techniques - Interiors (7157) September 2017 Version 1.2 OK QUALIFICATION HANDBO Qualification at a glance Subject area Interiors City & Guilds number 7157 Age group approved All Assessment Assignment Fast track Available Support materials Centre handbook Assessment pack Registration and Consult the Walled Garden/Online certification Catalogue for last dates Title and level GLH TQT City & Accreditation Guilds number number Level 2 Award in 43 60 7157-02 601/2099/X Creative Techniques - Interiors Level 2 Certificate in 154 200 7157-12 601/2071/X Creative Techniques - Interiors Level 2 Diploma in 350 460 7157-13 601/2074/5 Creative Techniques - Interiors Version and date Change detail Section 1.1 Jan 2014 General formatting amends Various 1.2 September 2017 Added GLH and TQT Structure 2 Level 2 Award/Certificate/ Diploma in Creative Techniques - Interiors (7157) Contents 1 Introduction 5 Structure 6 2 Centre requirements 11 Approval 11 Resource requirements 11 Candidate entry requirements 12 3 Delivering the qualification 13 Initial assessment and induction 13 Support materials 13 Recording documents 13 4 Assessment 14 Assessment of the qualification 14 Assessment strategy 14 Recognition of prior learning (RPL) 14 5 Units 15 Unit 201 Developing design ideas 16 Unit 202 Sampling techniques and processes for Interiors 20 Unit 203 Design and make interlined curtains with handmade headings 25 Unit 204 Design and make coordinated decorative cushions 30 Unit 205 Making interlined Roman blinds 36
    [Show full text]
  • Invitation to Bid (ITB) for the Above-Referenced Subject
    PROGRAMA DE LAS NACIONES UNIDAS PARA EL DESARROLLO INVITATION TO BID 88324 Musical Education Program of the FUNDAMUSICAL-Phase II COMPONENT: 58656 SIMON BOLIVAR SOCIAL ACTION FOR THE MUSIC ITB/041/FUNDAMUSICAL/2017 - ACQUISITION OF TOOLS FOR STRING INSTRUMENTS LUTHERIA AND WIND August, 2017 1 PROGRAMA DE LAS NACIONES UNIDAS PARA EL DESARROLLO Section 1. Letter of Invitation Caracas, Venezuela August 9, 2017 ITB/041/FUNDAMUSICAL/2017 - ACQUISITION OF TOOLS FOR STRING INSTRUMENTS LUTHERIA AND WIND Dear Mr. /Ms., The United Nations Development Programme (UNDP) hereby invites you to submit a Bid to this Invitation to Bid (ITB) for the above-referenced subject. This ITB includes the following documents: Section 1 - This Letter of Invitation Section 2 - Instructions to Bidders (including Data Sheet) Section 3 - Instructions to Bidders a) Schedule of Requirements and Technical Specifications b) Related services Section 4 - Bid Submission Form Section 5 - Documents Establishing the Eligibility and Qualifications of the Bidder a) Compliance Table - Documents Section 6 - Technical Bid Form Section 7 - Price Schedule Form Section 8 - Form for Bid Security Section 9 - Form for Performance Security Section 10 - General Terms and Conditions of Purchase Orders Your offer, comprising of a Technical Bid and Price Schedule, together in a sealed envelope, should be submitted in accordance with Section 2, no later than 18 August 2017 at 06:00 pm, Official Time of the Bolivarian Republic of Venezuela (GMT: -4 Hrs.). You are also kindly requested to submit an acknowledgment letter to UNDP advising whether your company intends to submit a Bid to the following address: United Nations Development Programme Avenida Francisco de Miranda, Torre HP, Piso 6, Oficina 6-A.
    [Show full text]
  • Handling Mail and Files
    TREASURY DEPARTMENT UNITED STATES COAST GUARD RULES FOR HANDLING MAIL AND FILES AT UNITS OF THE UNITED STATES COAST GUARD 1936 UNITED STATES GOVERNMENT PRINTING OFFICE WASHINGTON: 1936 / RULES FOR HANDLING MAIL AND FILES UNITED STATES COAST GUARD MAIL (F,ield Units) 1. Incoming mail will be stamped in the upper LEFT-HAND corner to show date of receipt and marked with appropriate subject number or numbers and filed in its proper folder after it has been attended to. 2. In no case will a change be made in the schedule of subject numbers without the approval of Headquarters. 3. All mail shall be promptly attended to and answered without r' delay. 4. All other forms of correspondence and regulations pertaining I thereto shall be as provided in Chapter XXII of the regulations. INCOMING MAIL (Headquarters) 1. Incoming mail will be stamped in the upper RIGHT-HAND corner to show date of receipt and marked with appropriate subject number or numbers and filed in its proper folder after it has been " attended to. 2. In no case will a change be made in the schedule of subject numbers without the approval of the Chief, Mail, Files, and Duplicat­ ing Section. / In case an assigned number appears to be incorrect, the paper shall be returned to the Mail, Files, and Duplicating Section with a suggestion as to the proper number or numbers. 3. All mail shall be promptly attended to and answered without delay. 4. Communications which may reach a section or division without having been stamped and numbered shall at once be sent to the Mail, Files, and Duplicating Section, for stamping and numbering.
    [Show full text]
  • Summa Canister Cleaning Procedures
    SOP#: 1703 SUMMA CANISTER DATE: 09/01/94 CLEANING PROCEDURES REV. #: 0.0 1.0 SCOPE AND APPLICATION 0.2 ppbv, the canister is determined clean. Clean canisters are leak-tested by pressurizing with nitrogen This standard operating procedure (SOP) is intended for 24 hours. Canisters that have been determined for use when cleaning Summa polished stainless steel clean and without leaks are evacuated. These canisters. Summa canisters provide a medium to canisters are logged in as cleaned and certified and are sample gas-phase Volatile Organic Compounds stored in the evacuated state with brass cap fittings (VOCs) on-site at concentrations of one part per until needed for sampling. billion by volume (ppbv) and greater. This procedure is to assure that canisters have been sufficiently 3.0 SAMPLE PRESERVATION, cleaned prior to sampling, to the extent that no VOC CONTAINERS, HANDLING contamination is present at concentrations greater than AND STORAGE 0.2 ppbv. 3.1 Canister Receipt These are standard (i.e., typically applicable) operating procedures which may be varied or changed 1. The overall condition of each sample canister as required, dependent on site conditions, equipment is observed. Any canister having physical limitations or limitations imposed by the procedure or defects requires corrective action. other procedure limitations. In all instances, the ultimate procedures employed should be documented 2. Each canister should be observed for an and associated with the final report. attached sample identification number. Mention of trade names or commercial products does 3. Each canister is recorded in the dedicated not constitute U.S. EPA endorsement or laboratory logbook by its Summa canister recommendation for use.
    [Show full text]
  • Courier Gazette Tuesday, March 19, 1H95
    4 T he Courier-Gazette. V olum e 50. ROCKLAND, MAINE, TUESDAY, MARCH i9, 1895. id Clnua Hall Mutter. N im b k b 11 FRATERNITY FACTS. color to be soiled by the touch of the traitors Maj.-Gen. Hiram G. Berry to your country and to your God.’ Highest of all in Leavening Power.— Latest U . S. Gov’t Report Disclosures of Importance from Ihe Hidden Haunt “Colonel Berry then introduced the Rev. W hat is it? Mr. Kalloch to respond to thc presentation. of the Gay and Giddy Goat. A It IOC l!AI‘IIY The reverend gentleman said he was proud In point of fact, it is the freedom to accept the task devolved upon him. lie from poisonous and spurious in­ \ cry Eminent Sir Frederick S. Walls of was ashamed of the man who did not love Vinalhaven, Deputy Commander of the Grand his country, hut this could never he said of Baking gredients, the excellence in flavor, Cominandery of Maine, officially inspected St. ll'ri/fcu fo r the Courier-Gazette by Edward K Gould that gives to the sons of Maine. (Applause) Whoever John’s Cominandery of Knighti Templar at [Begun In No. 8. Back number* can be had. | does not now love his country would he Bangor Monday night. IV. the Broadway side, the regiment was marched unworthy of the name American or citizen. The new order or warrant for Pioneer to the front of City Hall, where they were re­ He would exhort them to remember that not Powder Conclave, Order of Secret Monitor, is on ex­ The lirst accident in the regiment occurred ceived by committees of the Sons and Daugh­ only were they soldiers, hut freemen, and to hibition at the Atlantic Shoe Store.
    [Show full text]
  • Toomeys of Allegheny City
    TOOMEYS OF ALLEGHENY CITY This information is provided for genealogical purposes only, please respect the wishes of the individuals and their families and the Churches providing the information named in these records. I wish to thanks all the people who have contributed to this work: My husband Rene’Thomas Urzua-Corona, who has waited outside half the libraries in the world and suffered through many late suppers. My Seanachies, especially my father Joseph John Toomey who never denied me a great story, My uncle and godfather, Francis Joseph Toomey who shared the only known record of my ancestors, My uncles Anthony and Thomas who explained many things to someone who had only book learning, My Aunt and godmother Ellen (Helen) Toomey Renter who put up with all my questions. The librarians of Carnegie library of Oakland and Woods Run who are always willing to find a book and fix the computer. Historic Pittsburgh.com which provides early photographs of the area and Pittsburgh City Photographer Collection. ANCIENT HISTORY This can be found in two books which are available at Carnegie Library of Pittsburgh, Oakland Branch, reference section on the 3rd floor. Family Names of County Cork by Diarmuid Ó Murchadha, Glendale Press, pp. 314-316 (Tuama). This book is recommended by the Cork Historical Society The O’Toomeys of Croom by Thomas Noxon Toomey, pp. 1-7 The Coat of Arms The coat of arms used by the OTuama. The Irish Board of Heraldry uses the distinctive Irish custom of sept arms permitting any descendent of an Irish chieftain to display the arms.
    [Show full text]
  • Renovating Home Furnishings, Home and Family Education: 2781.01. INSTITUTION Dade County Public Schools, Miami, Fla
    DOCUMENT RESUME ED 095 428 CE 002 046 AUTHOR Linden, Janice TITLE Renovating Home Furnishings, Home and Family Education: 2781.01. INSTITUTION Dade County Public Schools, Miami, Fla. PUB DATE 73 NOTE 67p.; An Authorized Course of Instruction for the Quinmester Program !DRS PRICE NF-$0.75 HC-$3.15 PLUS POSTAGE DESCRIPTORS Behavioral Objectives; Course Content; Course Descriptions; *Curriculum Guides; Equipment; Family Life Education; *Furniture; Hand Tools; *Home Economics; Homemaking Skills; Industrial Arts; *Repair; Secondary Grades; Shop Curriculum; Trade and Industrial Education; *Vocational Education IDENTIFIERS *Quinmester Program; Reupholstering ABSTRACT The course examines the tools, materials, and basic principles used in reupholstering furniture. Techniques involved in using equipment, dismantling furniture, constructing the foundation, making the muslin cover, planning and preparing the platform and covering, and attaching loose wood panels are some of the operations dealt with in the course. The vocational, as well as home, use of these skills is explored. Available to all high school seniors, it is recommended that Wood Finishing, Industrial Arts-5874.04 be considered as an extension of the course. The guide is organized according to behavioral goals with instructional material coordinated under the headings: suggested content ideas, learning opportunities, and resources. The 36-page appendix offers illustrations of each step in the upholstering process, a guide to upholstery equipment, and other procedural guidelines. (Author/MW)
    [Show full text]
  • Occupational Requirements Survey (ORS) Collection Manual
    Occupational Requirements Survey (ORS) Collection Manual Third Edition Instructions in this manual became effective July 2017. It includes updated procedures information from Procedure Alerts through #181, Technical Memorandums through #322, and applicable ORS SO-70s through #32. U. S. Department of Labor Office of Compensation and Bureau of Labor Statistics Working Conditions Washington, D. C. 20212 July 2017 Table of Contents Table of Contents ........................................................................................................................... i Preface ............................................................................................................................................ v Introduction .................................................................................................................................. vi Information Reference Guide .................................................................................................... vii Major Changes to ORS Manual (July 2017) ........................................................................... viii Chapter 1: Key Concepts ............................................................................................................. 1 1_01 Task, Worker, Job, Occupation ........................................................................................... 2 Standard Occupational Classification (SOC) system and O*NET ............................... 3 1_02 Work as Generally Performed, Critical Job Function, Critical and Incidental
    [Show full text]
  • Catalog Price List
    www.wsusol.com (We Sell Upholstery Supplies Online) 1-800-262-5790 or (252) 237-2294 Adhesive Remover These variety of adhesive removers are helpful when trying to remove ink, heel marks, oil, tar and most any sticky residues. Max Citrus Power Remover 5 Oz. Aerosol (Each) 1 @ 5.58, 6-11 @ 5.21, 12-23 @ 5.02, ADR4005 24-47 @ 4.83, 48+ @ 4.65 Citrus Power Removes dried latex paint drips,spatters,marker, ink, sticker residue, scuff marks, pen, gum and crayon. Use to clean counter tops, desks, cabinets, computers, notebooks, printers, monitors, keyboards, copiers, scanners, fax Machines, televisions, metals, glass, wood, fiberglass, fabrics, vinyl, carpets, and polypropelene. (May be harmful to some plastics, so test on hidden area first.) Max Industrial Citrus Power Remover 5oz. Aerosol (Each) 1 @ 6.19, 6-11 @ 5.78, 12-23 ADR4006 @ 5.57, 24-47 @ 5.36, 48+ @ 5.16 Citrus Power Removes marker, ink, sticker residue, scuff marks, pen, gum and crayon. Use to clean counter tops, desks, cabinets, computers, notebooks, printers, monitors, keyboards, copiers, scanners, fax Machines, metals, glass, wood, fiberglass, fabrics, vinyl, and carpets. (May be harmful to some plastics, so test on hidden area first.) Adhesive Spray Gun and Brushes Poly Sponge Paint Brush 1-inch (Each) 1 @ 0.32, 12-23 @ 0.29, 24-35 @ 0.27, 36-47 ASG00005 @ 0.26, 48+ @ 0.23 Works on all smooth surfaces-woodwork,sash, floors,walls,ceilings, and furniture. Use enamel, latex, or oil base paints, stains, and varnishes. Not for use with shellacs or lacquers. Cleans up same as bristle brush.
    [Show full text]
  • Fall Tool Sale, 2020
    “Horst Auction Center” Fall Tool Sale, 2020 Saturday, October 31, 2020 – 9:00 AM Preview Times: Friday, October 30 2020 – 1:00 PM till 5:00 PM 1. Tinsmith’s bench top 18” bending brake, G+ 2. Signed (?), Tarrytown, NY. Tinsmith’s hand crank bead rolling machine w/ bench stand, G-G+ 3. Unsigned Tinsmith’s 31” hand crank stove pipe/cylinder rolling machine 4. Unsigned Tinsmith’s hand crank turning machine w/ bench stand, G 5. Lg. Tinsmith bench-top shears, G+ 6. Peck, Smith & Co., Tinsmith’s hand crank “Setting Down” machine w/ bench stake, F+-G 7. Niagara M&T Works, hand crank “light” beading machine w/ bench stand 8. Pexto, Tinsmith’s hand crank burring machine w/ bench stand (crank hand broken) 9. Niagara, Tinsmith’s hand crank “setting down” machine w/ bench stand, F (crank repaired) 10. Tinsmith’s bench mount 31” seam folder w/ adjustable roller (damaged foot) 11. Lg. Tinsmith’s bench top shears, G 12. Bench top combination anvil/vise, patent date Sept. 22, 1914. Vise has pin-stop adjustable bar, G 13. 2 – Tinsmith tools: Niagara base w/ late spouting furrel roller machine, G; Peck, Stowe & Wilcox, wiring machine w/ bench stand 14. 22 ½” Beakhorn stake anvil in wooden log, G 15. 41” High, wooden cone mandrel, Vg 16. Peck, Stowe & Wilcox, bench mount 31” bar folding machine/brake 17. Early “hornless” anvil, 0-3-15 stone weight, approx. 99Lbs., G 18. Primitive small square stake w/ mounted stool 19. Primitive Shipwright’s “Beak” stake anvil w/ wooden log base 20.
    [Show full text]
  • Basic Tool Information and Safety
    Basic Tool Information And Safety G.A. Blackburn © TINKERS CORNER 2010 The amount of energy delivered to the target by the hammer-blow is equivalent to one half the mass of the head times the square of the head's speed at the time of impact While the energy delivered to the target increases linearly with mass, it increases geometrically with the speed (see the effect of the handle, below). HAMMER Force A hammer is a tool meant to deliver an impact to an object. The most common uses are for driving nails, fitting parts, forging metal and breaking up objects. Hammers are often designed for a specific purpose, and vary widely in their shape and structure. The usual features are a handle and a head, with most of the weight in the head. The basic design is hand-operated, but there are also many mechanically operated models for heavier uses, such as steam hammers. The hammer may be the oldest tool for which definite evidence exists. Stone hammers are known which are dated to 2,600,000 BCE.[1][2] The hammer is a basic tool of many professions. Popular hand-powered types include: Ball-peen hammer, or mechanic's hammer Carpenter's hammers (used for nailing), such as the Framing hammer and the claw hammer The physics of hammering Construction hammers, including the Sledgehammer Hammer as a force amplifier Cross-peen hammer, or Warrington hammer A hammer is basically a force amplifier that works by Drilling hammer - a lightweight, short handled converting mechanical work into kinetic energy and back.
    [Show full text]