ISO Update Supplement to ISOfocus

September 2018 International Standards in process

ISO/DTS Sustainable development and social responsi- 26030 bility — Guidance for using ISO 26000:2010 in An International Standard is the result of an agreement between the food chain the member bodies of ISO. A first important step towards an Interna- TC 42 Photography tional Standard takes the form of a committee draft (CD) - this is cir- ISO/DTR Imaging materials — Evaluation of image culated for study within an ISO technical committee. When consensus 18942 permanence of photographic colour prints in has been reached within the technical committee, the document is consumer home applications sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the ISO/CD Digital colour prints — Permanence and dura- member bodies casting a vote. A confirmation vote is subsequently 21139-1 bility performance in commercial applications carried out on a final draft International Standard (FDIS), the approval — Part 1: Definition of use cases and guiding criteria remaining the same. principles for specifications ISO/DTS Digital colour prints — Permanence and dura- 21139-21 bility performance in commercial applications — Part 21: Display window — Light and ozone stability TC 43 Acoustics ISO/CD 5135 Acoustics — Determination of sound power levels of noise from air-terminal devices, air- terminal units, dampers and valves by meas- CD registered urement in a reverberation room ISO/CD 11691 Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory Period from 01 August to 31 August 2018 survey method These documents are currently under consideration in the technical ISO/CD 23351 Acoustics — Measurement of speech reduction committee. index of furniture ensembles They have been registred at the Central Secretariat. TC 44 Welding and allied processes ISO/DTR Resistance welding — Overview of standards PC 315 Indirect, temperature-controlled 23413 for resistance welding refrigerated delivery services – land TC 45 Rubber and rubber products transport of parcels with intermediate transfer ISO/CD 1436 Rubber hoses and hose assemblies — Wire- braid-reinforced hydraulic types for oil-based ISO/CD 23412 Indirect, temperature-controlled refrigerated or water-based fluids — Specification delivery services — Land transport of parcels ISO/CD 3862 Rubber hoses and hose assemblies — Rub- with intermediate transfer ber-covered spiral-wire-reinforced hydraulic TC 5 Ferrous metal pipes and metallic types for oil-based or water-based fluids fittings — Specification ISO/CD 21051 Construction and installation of ductile iron ISO/CD 4079 Rubber hoses and hose assemblies — Textile- pipeline system reinforced hydraulic types for oil-based or water-based fluids — Specification TC 8 Ships and marine technology TC 67 Materials, equipment and offshore ISO/CD 23055 Ships and marine technology — International ballast water shore connection flange — De- structures for petroleum, petrochemi- sign requirements cal and natural gas industries TC 10 Technical product documentation ISO/CD Determination of the resistance to cryogenic 20088-2 spillage of insulation materials — Part 2: Vapor ISO/CD 22014 Library objects for architecture, engineering, phase construction and use TC 68 Financial services TC 20 Aircraft and space vehicles ISO/CD 23195 Security objectives of information systems of ISO/CD 21895 Categorization and classification of civil un- third party payment services manned aircraft systems TC 84 Devices for administration of medicinal TC 22 Road vehicles products and catheters ISO/DTR Road vehicles — Extended vehicle (ExVe) "web ISO/CD Needle-based injection systems for medical 20078-4 services" — Part 4: ExVe control 11608-1 use — Requirements and test methods — Part ISO/CD Road vehicles — Clock extension peripheral 1: Needle-based injection systems 20794-4 interface (CXPI) — Part 4: Data link and physi- ISO/CD Needle-based injection systems for medical cal layer 11608-2 use — Requirements and test methods — Part ISO/DTR Road vehicles — Multidimensional measure- 2: Needles 21002 ment and coordinate system definition ISO/CD Needle-based injection systems for medical TC 23 Tractors and machinery for agriculture 11608-3 use — Requirements and test methods — Part and forestry 3: Finished containers ISO/CD Machinery for forestry — Portable chain-saw ISO/CD Needle-based injection systems for medical 11681-2 safety requirements and testing — Part 2: 11608-5 use — Requirements and test methods — Part Chain-saws for tree service 5: Automated functions TC 34 Food products

ISO Update, Supplement to ISO Focus -- September 2018 1 ISO/CD Sharps injury protection — Requirements ISO/DTS Thermoplastic pipes for the conveyance of 23907-2 and test methods — Part 2: Reusable sharps 22499 fluids — Inspection of polyethylene butt fusion containers joints using phased array ultrasonic testing TC 85 Nuclear energy, nuclear technologies, TC 146 Air quality and radiological protection ISO/CD Workplace air — Determination of metals and ISO/CD Nuclear energy — Vocabulary — Part 1: Gen- 15202-1 metalloids in airborne particulate matter by 12749-1 eral terminology inductively coupled plasma atomic emission spectrometry — Part 1: Sampling ISO/CD 16795 Nuclear energy — Determination of Gd2O3 content of gadolinium fuel pellets by X-ray ISO/CD Workplace air — Determination of metals and fluorescence spectrometry 15202-2 metalloids in airborne particulate matter by inductively coupled plasma atomic emission TC 94 Personal safety -- Personal protective spectrometry — Part 2: Sample preparation equipment TC 156 Corrosion of metals and alloys ISO/CD 6942 Protective clothing — Protection against heat and fire — Method of test: Evaluation of materi- ISO/CD 23226 Corrosion of metals and alloys — Guidelines als and material assemblies when exposed to a for corrosion testing of metals and alloys ex- source of radiant heat posed in deep sea water TC 107 Metallic and other inorganic coatings TC 171 Document management applications ISO/CD 8289-1 Vitreous and porcelain enamels — Low voltage ISO/CD Document management — ECMAScript for test for detecting and locating defects — Part 21757-1 ISO 32000-1 (PDF 1.7) — Part 1: Core PDF 1: Swab test for non-profiled surfaces support ISO/CD 22462 Metallic and other inorganic coatings — The ISO/CD Document management — ECMAScript for methods of friction coefficient measurement of 21757-2 ISO 32000-1 (PDF 1.7) — Part 2: Extensions for chemical conversion coatings use in 3D annotations TC 108 Mechanical vibration, shock and condi- TC 184 Automation systems and integration tion monitoring ISO/DTS Oil and Gas asset management and operations ISO/CD Mechanical vibration — Measurement and 18101-1 and maintenance interoperability (OGI) — Part 20816-9 evaluation of machine vibration — Part 9: Gear 1: Overview and fundamental principles units TC 188 Small craft TC 110 Industrial trucks ISO/CD 8848 Small craft — Remote steering systems ISO/CD Rough-terrain trucks — User requirements — ISO/CD 23411 Small craft — Steering wheels 11525-1 Part 1: General requirements TC 194 Biological and clinical evaluation of ISO/CD Rough-terrain trucks — User requirements — medical devices 11525-2 Part 2: Slewing variable-reach trucks ISO/DTS Biological evaluation of medical devices — Part TC 114 Horology 37137-1 1: Guidance for absorbable implants ISO/CD Mineral and sapphire watch-glasses — Part 4: TC 204 Intelligent transport systems 14368-4 Coating performance ISO/PRF TS Intelligent transport systems — ITS station ISO/CD 23346 Radio-controlled clocks — Signal receiving 21177 security services for secure session estab- measurement methods lishment and authentication between trusted TC 121 Anaesthetic and respiratory equipment devices ISO/CD 26825 Anaesthetic and respiratory equipment — TC 206 Fine ceramics User-applied labels for syringes containing ISO/CD 22551 Fine ceramics (advanced ceramics, advanced drugs used during anaesthesia — Colours, technical ceramics) — Determination of design and performance bacterial reduction rate by semiconducting IEC/CD Medical electrical equipment — Part 2-86: photocatalytic materials under indoor lighting 80601-2-86 Particular requirements for the basic safety and environment — Semi-dry method for estimat- essential performance of electrocardiographs, ing antibacterial activity on the actual environ- including diagnostic equipment, monitoring mental bacteria contamination surface equipment, ambulatory equipment, electrodes, TC 207 Environmental management cables and leadwires ISO/CD 14091 Adaptation to climate change — Vulnerability, TC 126 Tobacco and tobacco products impacts and risk assessment ISO/CD 22980 Tobacco — Determination of the Content of TC 211 Geographic information/Geomatics Total alkaloids as Nicotine — Continuous-Flow Analysis Method using KSCN/DCIC ISO/CD 19166 Geographic information — BIM to GIS concep- tual mapping (B2GM) TC 130 Graphic technology ISO/DTR Geographic Information — The Application ISO/CD TS Image technology colour management — 19167 of ubiquitous public access for air quality 23534-1 Interoperability conformance specification: information Architecture for process colour plus spot colour overprint simulation — Part 1: Part 1: TC 212 Clinical laboratory testing and in vitro Colorimetric processing diagnostic test systems TC 138 Plastics pipes, fittings and valves for ISO/CD In vitro diagnostic test systems — Qualitative the transport of fluids 17822-2 nucleic acid-based in vitro examination proce- dures for detection and identification of micro- ISO/DTS Thermoplastic pipes for the conveyance of flu- bial pathogens — Part 2: Quality practices for 16943 ids — Inspection of polyethylene electrofusion nucleic acid amplification socket joints using the phased array ultrasonic testing method TC 215 Health informatics

2 ISO Update, Supplement to ISO Focus -- September 2018 ISO/CD Health informatics — Public key infrastruc- ISO/IEC CD Information technology — Office equipment 17090-4 ture — Part 4: Digital Signatures for healthcare 21118 — Information to be included in specification documents sheets — Data projectors ISO/DTS Health informatics — Metadata repository ISO/IEC CD Method for the Determination of Ink Cartridge 21526 requirements (MetaRep) 22505 Yield for Monochrome Inkjet Printers and Multifunction Devices that Contain Printer ISO/DTS Health Informatics — Categorial structure for Components 23303 Chinese materia medica products manufactur- ing process ISO/IEC CD Information technology — Office equip- 24734 ment — Method for measuring digital printing TC 217 Cosmetics productivity ISO/DTR Cosmetics -Terminology — Methods of extract ISO/IEC CD Information technology — Office equip- 22582 evaporation and calculation of organic indexes; 24735 ment — Method for measuring digital copying supplemental information to use with ISO productivity 16128-2 ISO/IEC CD Information technology — JPEG 2000 image TC 228 Tourism and related services 15444-15 coding system — Part 15: High Throughput ISO/CD 21902 Tourism and related services — Acces- Coding Options (HTJ2K) sible tourism for all — Requirements and ISO/IEC CD Information technology — High efficiency recommendations 23008-7 coding and media delivery in heterogeneous TC 229 Nanotechnologies environments — Part 7: MMT Conformance ISO/DTS Nanotechnology - Specifications for Carbon ISO/IEC Information technology — Dynamic adaptive 19808 Nanotube Suspension: characteristics and test 23009-1:2014/ streaming over HTTP (DASH) — Part 1: Media methods PDAM 5 presentation description and segment formats — Amendment 5: Device information and other ISO/DTR Nanotechnologies — Considerations for the extensions 21386 measurement of nano-objects, and their aggregates and agglomerates (NOAA) in the ISO/IEC Information technology — Dynamic adaptive environment 23009-2:2017/ streaming over HTTP (DASH) — Part 2: Con- PDAM 1 formance and reference software ISO/DTR Nanotechnologies — Considerations in per- — Amendment 1: Conformance vectors and 22019 forming toxicokinetic studies of nanomaterials reference software for SRD, SAND and Server TC 249 Traditional Chinese medicine Push ISO/CD 22894 Traditional Chinese medicine — Pulse wave- ISO/IEC CD Internet of media things — Part 1: Architecture form format 23093-1 ISO/CD TS Traditional Chinese medicine — Clinical Docu- ISO/IEC CD Internet of Media Things — Part 3: IoMT Media 23030 ment specification for prescription of TCM 23093-3 Data Formats and API decoction pieces ISO/IEC PDTS Information technology — Information technol- TC 265 Carbon dioxide capture, transportation, 24751-4 ogy for learning, education and training — and geological storage AccessForAll Framework For Individualized Accessibility — Part 4: Registry server API ISO/CD 27920 Carbon dioxide capture, transportation and geological storage (CCS) — Quantification and ISO/IEC CD Information technology — Scenario evaluation Verification 21472 methodology for user interaction influence in biometric system performance TC 269 Railway applications ISO/IEC PDTS Performance testing of biometrics on mobile ISO/CD Railway applications — Rubber suspension 21879 devices 22749-1 components — Part 1: Characteristics and test methods for rubber and rubber to metal parts ISO/IEC CD Information technology — Biometric presen- 30107-4 tation attack detection — Part 4: Profile for ISO/CD Railway applications — Rubber suspension evaluation of mobile 22749-2 components — Part 2: Approval procedure and quality monitoring ISO/IEC PDTR Information technology — IT Enabled Services- 30105-6 Business Process Outsourcing (ITES-BPO) TC 292 Security and resilience lifecycle processes — Part 6: Guidelines on ISO/CD TR Security and resilience — Framework and risk management 22370 principles for urban resilience ISO/IEC PDTR Information technology — IT Enabled Services- TC 293 Feed machinery 30105-7 Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 7: Exemplar for ISO/CD 21692 Terminology for liquid addition and coating maturity assessment equipment for feed processing ISO/CD 21695 Terminology of batching and mixing equipment for feed processing JTC 1 Information technology ISO/IEC CD Information technology - An upper level ontol- 21972 ogy for smart city indicators ISO/IEC CD Information technology — Smart City ICT refer- 30145-3 ence framework — Part 3: Smart city engineer- DIS circulated ing framework ISO/IEC CD Systems and software engineering — Capabili- Period from 01 August to 31 August 2018 23531 ties of issue management tools These documents have obtained substantial support within the ap- ISO/IEC PDTR Software and systems engineering — Lifecycle propriate ISO technical committee. 29110-5-6-3 profiles for verysmall entities (VSEs) — Part 5-6-3: Systems engineering: Management They have been submitted to the ISO member bodies for voting by and engineering guide: Generic profile group: the date shown. Intermediate profile

ISO Update, Supplement to ISO Focus -- September 2018 3 * Available in English only ISO/DIS Agricultural and forestry ma- 16122-5 chines — Inspection of sprayers in use — Part 5: Aerial spray 2018-11-13 systems — Environmental Vote protection terminates ISO 4254- Agricultural machinery — Safety 11:2010/DAmd — Part 11: Pick-up balers — TC 6 Paper, board and pulps 1 Amendment 1 2018-11-14 ISO/DIS 1762 Paper, board, pulps and cel- lulose nanomaterials — Deter- ISO/DIS Irrigation equipment — Irrigation mination of residue (ash content) 2018-11-06 15886-4 sprinklers — Part 4: Test meth- on ignition at 525 degrees C ods for durability 2018-11-01 (Revision of ISO 1762:2015) ISO/DIS 2144 Paper, board, pulps and cel- TC 29 Small tools lulose nanomaterials — Deter- mination of residue (ash content) 2018-11-03 ISO/DIS 10243 Tools for pressing — Compres- on ignition at 900 degrees C sion springs with rectangular (Revision of ISO 2144:2015) section — Housing dimensions 2018-11-02 and colour coding ISO/DIS 12830 Paper, board, pulps and cel- (Revision of ISO 10243:2010, lulose nanomaterials — Determi- ISO 10243:2010/Amd 1:2011) nation of acid-soluble magne- 2018-11-03 sium, calcium, manganese, iron, ISO/DIS 21223 Tools for pressing — Terminology copper, sodium and potassium (Revision of ISO 12830:2011) 2018-11-02

ISO/DIS 21993 Paper and Pulp — Deinkability test for printed paper products TC 34 Food products 2018-11-02 ISO/DIS 17059 Oilseeds — Extraction of oil and preparation of methyl esters TC 8 Ships and marine of triglyceride fatty acids for 2018-11-21 analysis by gas chromatography technology (Rapid method) ISO/DIS 15738 Ships and marine technology (Revision of ISO 17059:2007) — Life saving and fire protec- ISO/DIS 12871 Olive oils and olive-pomace oils tion — Gas inflation systems for 2018-11-02 — Determination of aliphatic and inflatable life-saving appliances triterpenic alcohols content by 2018-11-03 (Revision of ISO 15738:2002) capillary gas chromatography ISO/DIS 21173 Submersibles — Hydrostatic (Revision of ISO 12871:2010) pressure test — Pressure ISO/DIS 20813 Molecular biomarker analysis structures 2018-11-03 — Methods of analysis for the

detection and identification of 2018-11-03 TC 22 Road vehicles animal species from foods and food products (Nucleic acid ISO/DIS Road vehicles — Extended vehi- based methods) — General 20078-3.2 cle (ExVe) 'web services' — Part requirements and definitions 3: ExVe security 2018-10-04 TC 35 Paints and varnishes ISO/DIS 21498 Electrically propelled road ISO/DIS Paints and varnishes — Deter- vehicles — Electrical tests for 1518-1 mination of scratch resistance — voltage class B components 2018-11-10 Part 1: Constant-loading method 2018-10-26

ISO/DIS Electrically propelled road (Revision of ISO 1518-1:2011) 21782-1 vehicles — Test specification for ISO/DIS Paints and varnishes — Deter- electric propulsion components 2018-11-06 1518-2 mination of scratch resistance — — Part 1: General Part 2: Variable-loading method 2018-10-26 ISO/DIS Electrically propelled road 21782-2 vehicles — Test specification for (Revision of ISO 1518-2:2011) electric propulsion components 2018-11-06 ISO/DIS 2431 Paints and varnishes — Deter- — Part 2: Performance testing of mination of flow time by use of motor system flow cups 2018-10-26 ISO/DIS Electrically propelled road 21782-3 vehicles — Test specification for (Revision of ISO 2431:2011) electric propulsion components 2018-11-06 ISO/DIS 17872 Paints and varnishes — Guide- — Part 3: Performance testing of lines for the introduction of motor and inverter scribe marks through coatings 2018-11-16 TC 23 Tractors and machinery for on metallic panels for corrosion testing agriculture and forestry (Revision of ISO 17872:2007) ISO/DIS 15077 Tractors and self-propelled ISO/DIS 22516 Paints and varnishes — Practical machinery for agriculture — determination of non-volatile and Operator controls — Actuating 2018-11-14 volatile matter content during 2018-10-26 forces, displacement, location application and method of operation (Revision of ISO 15077:2008)

4 ISO Update, Supplement to ISO Focus -- September 2018 ISO/DIS 22518 Paints and varnishes — Deter- (Revision of ISO 9554:2010) mination of solvents in water- ISO/DIS Textiles and textile product — thinnable coating materials — 2018-10-26 22744-1 Critical substances potentially Gas-chromatographic method present in components of textile 2018-10-26 ISO/DIS Paints and varnishes — Electro- product materials — Determina- tion of organotin compounds 22553-1 deposition coatings — Part 1: Terminology and general 2018-10-26 — Part 1: Method using gas principle chromatography ISO/DIS Paints and varnishes — Electro- TC 39 Machine tools 22553-2 deposition coatings — Part 2: ISO/DIS Machine tools safety — Presses Throwing power 2018-10-26 16092-2 — Part 2: Safety requirement for mechanical presses 2018-11-21 ISO/DIS Paints and varnishes — Electro- 22553-3 deposition coatings — Part 3: ISO/DIS Machine tools safety — Presses Compatibility of electro-depo- 2018-10-26 16092-4 — Part 4: Safety requirements sition coating materials with a for pneumatic presses 2018-11-21 reference oil ISO/DIS Paints and varnishes — Electro- TC 41 Pulleys and belts (including 22553-4 deposition coatings — Part 4: veebelts) Compatibility of electro-deposi- 2018-10-26 tion coating materials with liquid, ISO/DIS 2790 Belt drives — V-belts for the paste-like and solid foreign automotive industry and corre- materials sponding pulleys — Dimensions 2018-10-27

ISO/DIS Paints and varnishes — Electro- (Revision of ISO 2790:2004) 22553-5 deposition coatings — Part 5: Determination of sieve residue 2018-10-26 TC 44 Welding and allied processes ISO/DIS Paints and varnishes — Electro- ISO/DIS 5178 Destructive tests on welds in 22553-6 deposition coatings — Part 6: metallic materials — Longitudinal Entry marks 2018-10-26 tensile test on weld metal in fu- 2018-11-03 sion welded joints (Revision of ISO 5178:2001) ISO/DIS 22557 Paints and varnishes — Scratch test using a spring-loaded pen ISO/DIS 9090 Gas tightness of equipment for 2018-10-26 gas welding and allied processes 2018-11-02

ISO/DIS 23321 Solvents for paints and varnishes (Revision of ISO 9090:1989) — Demineralized water for industrial applications — Specifi- 2018-11-16 ISO 15614- Specification and qualification of cation and test methods 1:2017/DAmd welding procedures for metallic 1 materials — Welding procedure 2018-11-16 ISO/DIS 23322 Paints and varnishes — Deter- test — Part 1: Arc and gas weld- mination of solvents in coating ing of steels and arc welding materials containing organic 2018-11-16 of nickel and nickel alloys — solvents only — Gas-chromato- Amendment 1 graphic method ISO/DIS Preparation of steel substrates TC 58 Gas cylinders 8504-1 before application of paints and ISO Gas cylinders — Non-refillable related products — Surface 2018-11-02 11118:2015/ metallic gas cylinders — Speci- preparation methods — Part 1: DAmd 1 fication and test methods — 2018-10-27 General principles Amendment 1 (Revision of ISO 8504-1:2000) ISO/DIS 11513 Gas cylinders — Refillable ISO/DIS Preparation of steel substrates welded steel cylinders containing 11124-5 before application of paints and materials for sub-atmospheric 2018-11-02 related products — Specifica- 2018-10-26 gas packaging (excluding tions for metallic blast-cleaning acetylene) — Design, construc- abrasives — Part 5: Cut steel tion, testing, use and periodic wire inspection TC 37 Language and terminology (Revision of ISO 11513:2011) ISO/DIS Language resource manage- TC 61 Plastics 24622-2 ment — Component metadata ISO/DIS 179-2 Plastics — Determination of infrasctructure (CMDI) — Part 2018-11-03 Charpy impact properties — Part 2: The component metadata 2: Instrumented impact test 2018-10-27 specific language TC 38 Textiles (Revision of ISO 179-2:1997, ISO 179-2:1997/Cor 1:1998, ISO ISO/DIS Textiles — Quantitative chemical 179-2:1997/Amd 1:2011) 1833-28 analysis — Part 28: Mixtures of ISO/DIS Plastics — Acquisition and pres- chitosan with certain other fibers 2018-11-21 10350-2 entation of comparable single- (method using diluted acetic point data — Part 2: Long-fibre- 2018-11-14 acid) reinforced plastics ISO/DIS 9554 Fibre ropes — General (Revision of ISO 10350-2:2011) specifications 2018-11-22

ISO Update, Supplement to ISO Focus -- September 2018 5 ISO/DIS 1110 Plastics — Polyamides — Ac- ISO/DIS 8836 Suction catheters for use in the celerated conditioning of test respiratory tract specimens 2018-11-22 2018-11-14

(Revision of ISO 1110:1995) (Revision of ISO 8836:2014) ISO/DIS Plastics — Thermoplastic ISO/DIS Medical electrical equipment 20028-1 polyester (TP) moulding and 80601-2-12.2 — Part 2-12: Particular require- extrusion materials — Part 1: 2018-11-22 ments for basic safety and 2018-10-02 Designation system and basis essential performance of critical for specifications care ventilators (Revision of ISO 20028-1:2017) (Revision of ISO 80601-2- 12:2011, ISO 80601-2-12:2011/ TC 67 Materials, equipment and Cor 1:2011) offshore structures for pe- troleum, petrochemical and TC 122 Packaging natural gas industries ISO/DIS 22015 Packaging — Accessible design ISO/DIS Installation and equipment for — Handling and manipulation 20257-1 liquefied natural gas — Design of 2018-11-10 floating LNG installations — Part 2018-11-13 1: General requirements TC 126 Tobacco and tobacco TC 79 Light metals and their products alloys ISO/DIS Cigarettes — Determination of ISO/DIS 18771 Anodizing of aluminium and its 10362-1 water in total particulate matter alloys — Method to test the sur- from the mainstrean smoke — 2018-11-15 face abrasion resistance using 2018-11-08 Part 1: Gas-chromatographic glass-coated abrasive paper method (Revision of ISO 10362-1:1999, ISO/DIS 10049 Aluminium alloy castings — ISO 10362-1:1999/Amd 1:2011) Visual method for assessing the porosity 2018-11-22 ISO/DIS 16055 Tobacco and tobacco products — Monitor test piece — Require- (Revision of ISO 10049:1992) ments and use 2018-11-10

TC 85 Nuclear energy, nuclear (Revision of ISO 16055:2012) technologies, and radio- ISO/DIS 22486 Water pipe tobacco smoking logical protection machine — Definitions and ISO Nuclear facilities — Ventilation standard conditions 2018-11-16 15080:2001/ penetrations for shielded enclo- DAmd 1 sures — Amendment 1 2018-11-06 ISO/DIS 9512 Cigarettes — Determination of ventilation — Definitions and TC 94 Personal safety -- Personal measurement principles 2018-10-30 protective equipment (Revision of ISO 9512:2002) ISO/DIS 20320 Protective clothing for use in Snowboarding — Wrist Protec- TC 127 Earth-moving machinery tors — Requirements and test 2018-11-01 ISO/DIS Earth-moving machinery — methods 6750-1 Operator's manual — Part 1: ISO/DIS Respiratory protective devices — Contents and format 2018-11-20 16900-1 Methods of test and test equip- ment — Part 1: Determination of 2018-11-13 (Revision of ISO 6750:2005) inward leakage TC 130 Graphic technology (Revision of ISO 16900-1:2014) ISO/DIS Graphic technology — Exten- ISO/DIS Respiratory protective devices — 16684-1 sible metadata platform (XMP) 16900-14 Methods of test and test equip- specification — Part 1: Data 2018-10-26 ment — Part 14: Measurement 2018-11-13 model, serialization and core of sound level properties (Revision of ISO 16900-14:2015) (Revision of ISO 16684-1:2012) TC 104 Freight containers ISO/DIS Graphic technology — Digital ISO/DIS 20854 Freight Container — Thermal 21812-1 data exchange — Print product containers — Safety standard for metadata for PDF files — Part 1: 2018-11-03 refrigerating systems using flam- 2018-11-21 Architecture and core require- mable refrigerants — Require- ments for metadata ments for design and operation TC 147 Water quality TC 120 Leather ISO/DIS Water quality — Technetium-99 ISO/DIS 22244 Leather — Raw Hides — Guide- 22125-1 — Part 1: Test method using lines for Preservation of Hides liquid scintillation counting 2018-11-01 ISO/DIS Water quality — Technetium-99 22125-2 — Part 2: Test method using ISO/DIS 22284 Leather — Raw Skins — Guide- inductively coupled plasma mass 2018-10-26 lines for Preservation of Goat spectrometry (ICP-MS) and Sheep Skins 2018-11-02 ISO/DIS 22908 Water quality - Radium 226 and radium 228 - Test method using TC 121 Anaesthetic and respiratory liquid scintillation counting 2018-11-17 equipment

6 ISO Update, Supplement to ISO Focus -- September 2018 TC 155 Nickel and nickel alloys ISO/DIS 20900 Intelligent transport systems — Partially automated park- ISO/DIS 12725 Nickel and nickel alloy castings ing systems (PAPS) — Perfor- 2018-11-02

mance requirements and test 2018-11-21 procedures

(Revision of ISO 12725:1997) TC 206 Fine ceramics TC 160 Glass in building ISO/DIS Fine ceramics (advanced 22197-2 ceramics, advanced technical ISO/DIS 22509 Glass in building — Heat ceramics) — Test method for 2018-11-21 strengthened soda lime silicate air-purification performance of glass 2018-11-20 semiconducting photocatalytic

materials — Part 2: Removal of TC 166 Ceramic ware, glassware acetaldehyde and glass ceramic ware in (Revision of ISO 22197-2:2011) contact with food ISO/DIS Fine ceramics (advanced ISO/DIS Ceramic ware, glass-ceramic 22197-3 ceramics, advanced technical 6486-1 ware and glass dinnerware in ceramics) — Test method for 2018-11-21 contact with food — Release 2018-11-08 air-purification performance of of lead and cadmium — Part 1: semiconducting photocatalytic Test method materials — Part 3: Removal of (Revision of ISO 6486-1:1999) toluene (Revision of ISO 22197-3:2011) ISO/DIS Glass hollow ware in contact 7086-1 with food — Release of lead and TC 211 Geographic information/ cadmium — Part 1: Test method 2018-11-06 Geomatics ISO/DIS Geographic information — (Revision of ISO 7086-1:2000) 19136-1 Geography Markup Language TC 171 Document management (GML) — Part 1: Fundamentals 2018-11-07 applications (Revision of ISO 19136:2007) ISO/DIS 22550 Document management — AFP interchange for PDF TC 212 Clinical laboratory testing 2018-11-15 and in vitro diagnostic test systems TC 190 Soil quality ISO/DIS 35001 Biorisk management for laboratories and other related ISO/DIS 17616 Soil quality — Guidance on organisations the choice and evaluation of bioassays for ecotoxicological 2018-11-01 TC 216 Footwear characterization of soils and soil ISO/DIS 17700 Footwear — Test methods for materials upper components and insocks (Revision of ISO 17616:2008) — Colour fastness to rubbing 2018-11-06 TC 194 Biological and clinical eval- and bleeding uation of medical devices (Revision of ISO 17700:2004) ISO 10993- Biological evaluation of medical TC 229 Nanotechnologies 7:2008/DAmd devices — Part 7: Ethylene oxide ISO/DIS 19749 Nanotechnologies — Meas- 1 sterilization residuals — Amend- 2018-11-02 urements of particle size and ment 1 shape distributions by scanning 2018-11-23 ISO/DIS Biological evaluation of medical electron microscopy 10993-18 devices — Part 18: Chemi- TC 238 Solid biofuels cal characterization of medical 2018-11-01 device materials within a risk ISO/DIS 21945 Solid biofuels — Simplified management process — Évalua- sampling method for small scale tion biologique applications 2018-11-22 (Revision of ISO 10993-18:2005) ISO/DIS Medical devices utilizing animal TC 256 Pigments, dyestuffs and 22442-1 tissues and their derivatives extenders — Part 1: Application of risk 2018-11-02 ISO/DIS 21683 Pigments and extenders — management Determination of experimentally (Revision of ISO 22442-1:2015) simulated nano-object release 2018-10-27 TC 204 Intelligent transport from paints, varnishes and pig- systems mented plastics ISO/DIS Electronic fee collection — Sys- TC 275 Sludge recovery, recycling, 17573-1 tems architecture for vehicle-re- treatment and disposal lated tolling — Part 1: Reference 2018-11-02 ISO/DIS 19698 Sludge recovery, recycling, model treatment and disposal — Ben- (Revision of ISO 17573:2010) eficial use of biosolids — Land 2018-11-08 ISO/DIS Intelligent transport systems — applications 19297-1 Shareable geospatial databases TC 279 Innovation management for ITS applications — Part 1: 2018-11-01 Framework ISO/DIS 50501 Innovation management — In- novation management system — Guidance 2018-10-31

ISO Update, Supplement to ISO Focus -- September 2018 7 TC 282 Water reuse ISO/DIS 22519 Purified water and water for injection pretreatment and pro- duction systems 2018-11-08

ISO/DIS 22447 Industrial wastewater classification FDIS circulated 2018-11-17

Period from 01 August to 31 August 2018 TMBG Technical Management Board - groups These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown ISO/IEC Guide to the development and DGuide 63 inclusion of aspects of safety in * Available in English only international standards for medi- 2018-12-15 cal devices (Revision of ISO/IEC Guide Vote 63:2012) terminates JTC 1 Information technology ISO/IEC/IEEE Systems and software engineer- IIW International Institute of DIS 15289 ing — Content of life-cycle infor- Welding mation items (documentation) 2018-11-02 ISO/FDIS Friction stir spot welding — Alu- (Revision of ISO/IEC/IEEE 18785-1 minium — Part 1: Vocabulary 15289:2017) 2018-10-25

ISO/IEC DIS Information technology — Per- 18013-2 sonal identification — ISO-com- ISO/FDIS Friction stir spot welding — pliant driving licence — Part 2: 2018-11-06 18785-2 Aluminium — Part 2: Design of Machine-readable technologies weld joints 2018-10-26 (Revision of ISO/IEC 18013- 2:2008, ISO/IEC 18013-2:2008/ ISO/FDIS Friction stir spot welding — Alu- Cor 1:2011) 18785-3 minium — Part 3: Qualification of ISO/IEC DIS Information technology — Per- welding operators 2018-10-26 18013-4 sonal identification — ISO-com- pliant driving licence — Part 4: 2018-11-14 ISO/FDIS Friction stir spot welding — Test methods 18785-5 Aluminium — Part 5: Quality and (Revision of ISO/IEC 18013- inspection requirements 2018-10-26 4:2011, ISO/IEC 18013-4:2011/ Cor 1:2013) PC 287 Chain of custody of wood ISO/IEC DIS Information technology — Com- and wood-based products 19774-1 puter graphics and image pro- cessing — Humanoid Animation 2018-10-27 ISO/FDIS Chain of custody of wood and (H-Anim) — Part 1: Architecture 38200 wood-based products (Revision of ISO/IEC 2018-09-29 19774:2006) ISO/IEC DIS Information technology — PC 294 Guidance on unit pricing 19774-2 Computer graphics and image ISO/FDIS Guidance on unit pricing processing — Humanoid Anima- 2018-10-27 21041 tion (H-Anim) — Part 2: Motion 2018-10-10 capture (Revision of ISO/IEC 19774:2006) TC 6 Paper, board and pulps ISO/IEC DIS Information technology — Se- ISO/FDIS Pulp — Determination of cel- 29192-6 curity techniques — Lightweight 21400 lulose nanocrystal sulfur and cryptography — Part 6: Message 2018-11-21 sulfate half-ester content 2018-10-24 authentication codes (MACs) ISO/IEC DIS Information technology — Se- ISO/FDIS Corrugating medium — Determi- 29192-7 curity techniques — Lightweight 7263-1 nation of the flat crush resistance cryptography — Part 7: Broad- 2018-11-20 after laboratory fluting — Part 1: 2018-10-19 cast authentication protocols A-flute (Revision of ISO 7263:2011) ISO/IEC DIS Information technology — Cod- 14496-32 ing of audio-visual objects — ISO/FDIS Corrugating medium — Determi- Part 32: File format reference 2018-11-21 7263-2 nation of the flat crush resistance software and conformance after laboratory fluting — Part 2: 2018-10-19 B-flute ISO/IEC DIS Information technology — Au- (Revision of ISO 7263:2011) 15434 tomatic identification and data capture techniques — Syntax for 2018-11-10 TC 17 Steel high-capacity ADC media ISO/FDIS Life cycle inventory calculation (Revision of ISO/IEC 20915 methodology for steel products 15434:2006) 2018-10-13

8 ISO Update, Supplement to ISO Focus -- September 2018 ISO/FDIS Heat-treatable steels, alloy steels ISO/FDIS Preparation of steel substrates 683-3 and free-cutting steels — Part 3: 8504-3 before application of paints and Case-hardening steels 2018-11-17 related products — Surface preparation methods — Part 3: (Revision of ISO 683-3:2016) Hand- and power-tool cleaning (Revision of ISO 8504-3:1993) ISO/FDIS Steel for the reinforcement and 15630-1 prestressing of concrete — Test TC 38 Textiles methods — Part 1: Reinforcing 2018-10-26 ISO/FDIS Textiles — Cotton yarns — Basis bars, rods and wire 10290 for specification (Revision of ISO 15630-1:2010) 2018-09-28 ISO/FDIS Steel for the reinforcement and 15630-2 prestressing of concrete — Test (Revision of ISO 10290:1993) methods — Part 2: Welded fabric 2018-10-26 ISO/FDIS Silk — Test method for determin- and lattice girders 21046 ing the size of silk yarns (Revision of ISO 15630-2:2010) 2018-10-08 ISO/FDIS Steel for the reinforcement and 15630-3 prestressing of concrete — Test methods — Part 3: Prestressing 2018-10-26 TC 41 Pulleys and belts (including steel veebelts) (Revision of ISO 15630-3:2010) ISO/FDIS 5289 Agricultural machinery — End- TC 20 Aircraft and space vehicles less hexagonal belts and groove sections of corresponding 2018-10-24 ISO/FDIS Aircraft — Smart contactor — pulleys 20949 General requirements (Revision of ISO 5289:1992) 2018-09-29 ISO/FDIS Light conveyor belts — Part 2: 21183-2 List of equivalent terms TC 23 Tractors and machinery for 2018-10-04 agriculture and forestry (Revision of ISO 21183-2:2005) ISO/FDIS Powered hand-held hedge trim- 10517 mers — Safety TC 42 Photography

ISO/FDIS Imaging materials — Photo (Revision of ISO 10517:2009, 18948 books — Test methods for per- ISO 10517:2009/Amd 1:2013) manence and durability 2018-10-13 ISO/FDIS Tractors and machinery for 11783-3 agriculture and forestry — Se- rial control and communications 2018-10-05 TC 43 Acoustics data network — Part 3: Data link ISO/FDIS 7779 Acoustics — Measurement of layer airborne noise emitted by infor- (Revision of ISO 11783-3:2014) mation technology and telecom- 2018-10-26 munications equipment TC 27 Solid mineral fuels (Revision of ISO 7779:2010) ISO/FDIS Classification of coals ISO/FDIS Acoustics — Noise from shoot- 11760 17201-1 ing ranges — Part 1: Deter- 2018-10-16 mination of muzzle blast by 2018-10-13

measurement (Revision of ISO 11760:2005) (Revision of ISO 17201-1:2005, ISO/FDIS Hard coal — Determination of ISO 17201-1:2005/Cor 1:2009) 12900 abrasiveness ISO/FDIS 9053 Acoustics — Determination of 2018-09-30 static airflow resistance

2018-10-03 (Revision of ISO 12900:2015)

TC 35 Paints and varnishes (Revision of ISO 9053:1991) ISO/FDIS 150 Raw, refined and boiled linseed ISO/FDIS Acoustics — Acoustic classifica- oil for paints and varnishes — 19488 tion of dwellings Specifications and methods of 2018-10-11 2018-10-25 test (Revision of ISO 150:2006) TC 44 Welding and allied ISO/FDIS 3681 Binders for paints and varnishes processes — Determination of saponifica- tion value — Titrimetric method 2018-10-07 ISO/FDIS Non-destructive testing of 20601 welds — Ultrasonic testing — (Revision of ISO 3681:1996) Use of automated phased array technology for steel components ISO/FDIS 4619 Driers for paints and varnishes with small wall thickness

2018-10-03 TC 61 Plastics ISO/FDIS Plastics — Injection moulding of (Revision of ISO 4619:1998) 294-2 test specimens of thermoplastic ISO/FDIS Paints and varnishes — Determi- materials — Part 2: Small tensile 2018-11-20 2812-2 nation of resistance to liquids — bars Part 2: Water immersion method 2018-10-02 (Revision of ISO 294-2:1996, ISO 294-2:1996/Amd 1:2004) (Revision of ISO 2812-2:2007)

ISO Update, Supplement to ISO Focus -- September 2018 9 ISO/FDIS Plastics — Injection moulding of TC 108 Mechanical vibration, 294-4 test specimens of thermoplastic shock and condition materials — Part 4: Determina- 2018-11-04 monitoring tion of moulding shrinkage (Revision of ISO 294-4:2001, ISO ISO/FDIS Methods for the calibration of 294-4:2001/Cor 1:2007) 16063-44 vibration and shock transduc- ers — Part 44: Calibration of field 2018-10-13 ISO/FDIS 2818 Plastics — Preparation of test vibration calibrators specimens by machining TC 113 Hydrometry (Revision of ISO 2818:1994, ISO ISO/FDIS 1070 Hydrometry — Slope-area 2818:1994/Cor 1:2007) method ISO/FDIS 4612 Plastics — Preparation of PVC 2018-09-28 pastes for test purposes — Planetary-mixer method 2018-11-02 (Revision of ISO 1070:1992, ISO 1070:1992/Amd 1:1997) (Revision of ISO 4612:1999) TC 121 Anaesthetic and respiratory ISO/FDIS Fibre-reinforced plastic compos- equipment 20337 ites — Shear test method using ISO/FDIS Non-invasive sphygmomanom- a shear frame for the determina- 2018-10-26 81060-2 eters — Part 2: Clinical investi- tion of the in-plane shear stress/ gation of intermittent automated 2018-10-10 shear strain response and shear measurement type modulus (Revision of ISO 81060-2:2013) TC 67 Materials, equipment and TC 122 Packaging offshore structures for pe- troleum, petrochemical and ISO/FDIS Packaging — Tamper verification natural gas industries 21976 features for medicinal product packaging ISO/FDIS Petroleum, petrochemical and 19277 natural gas industries — Quali- TC 123 Plain bearings fication testing and acceptance 2018-10-26 ISO/FDIS Plain bearings — Handling of criteria for protective coating 21433 plain bearings systems under insulation 2018-10-03 ISO/FDIS Determination of the resist- 20088-3 ance to cryogenic spillage of TC 126 Tobacco and tobacco insulation materials — Part 3: Jet 2018-10-15 products release ISO/FDIS Cigarettes — Determination of TC 76 Transfusion, infusion 21160 selected carbonyls in the main- and injection, and blood stream smoke of cigarettes — processing equipment for Method using high performance medical and pharmaceuti- liquid chromatography cal use ISO/FDIS Cigarettes — Determination ISO/FDIS Pen systems — Part 1: Glass 21330 of selected volatile organic 13926-1 cylinders for pen-injectors for compounds in the mainstream medical use 2018-10-02 smoke of cigarettes — Method using GC/MS (Revision of ISO 13926-1:2004) TC 130 Graphic technology TC 94 Personal safety -- Personal ISO/FDIS Graphic technology — Colour protective equipment 19302 conformity of printing workflows 2018-10-03 ISO/FDIS PPE ensembles for firefight-

18639-4 ers undertaking specific rescue activities — Part 4: Gloves 2018-10-20 ISO/FDIS Graphic technology — Determi- 21632 nation of the energy consump- tion of digital printing devices 2018-10-06 TC 104 Freight containers including transitional and related ISO/FDIS Series 1 freight containers — modes 1496-2 Specification and testing — Part TC 138 Plastics pipes, fittings and 2: Thermal containers 2018-10-26 valves for the transport of (Revision of ISO 1496-2:2008) fluids ISO/FDIS Series 1 freight containers — ISO/FDIS Thermoplastics piping systems 1496-5 Specification and testing — Part 13257 for non-pressure applications 5: Platform and platform-based 2018-10-25 — Test method for resistance to containers elevated temperature cycling (Revision of ISO 1496-5:1991, (Revision of ISO 13257:2010) ISO 1496-5:1991/Amd 1:1993, TC 142 Cleaning equipment for air ISO 1496-5:1991/Amd 2:1994) and other gases TC 107 Metallic and other inorgan- ISO/FDIS Test method to measure the ic coatings 21083-1 efficiency of air filtration media ISO/FDIS 6158 Metallic and other inorganic against spherical nanomaterials 2018-10-20 coatings — Electrodeposited — Part 1: Size range from 20 nm coatings of chromium for engi- 2018-10-12 to 500 nm neering purposes TC 146 Air quality (Revision of ISO 6158:2011)

10 ISO Update, Supplement to ISO Focus -- September 2018 ISO/FDIS Workplace air — Metals and ISO/FDIS Geotechnical investigation and 21832 metalloids in airborne particles 22477-1 testing — Testing of geotechni- — Requirements for evaluation cal structures — Part 1: Testing 2018-10-09 of measuring procedures of piles: static compression load testing ISO/FDIS Air quality — Environmental 28902-3 meteorology — Part 3: Ground- TC 198 Sterilization of health care based remote sensing of wind by 2018-10-04 products continuous-wave Doppler lidar ISO 11137- Sterilization of health care TC 147 Water quality 1:2006/FDAmd products — Radiation — Part 1: ISO/FDIS Water quality — Gross alpha 2 Requirements for development, 2018-10-05 11704 and gross beta activity — Test validation and routine control of method using liquid scintillation 2018-09-29 a sterilization process for medi- counting cal devices — Amendment 2: (Revision of ISO 11704:2010) Revision to 4.3.4 and 11.2 TC 150 Implants for surgery ISO/FDIS Packaging for terminally steri- 11607-1 lized medical devices — Part 1: ISO/FDIS Implants for surgery — Hy- Requirements for materials, ster- 2018-10-03 13779-2 droxyapatite — Part 2: Ther- ile barrier systems and packag- mally sprayed coatings of 2018-10-25 ing systems hydroxyapatite (Revision of ISO 11607-1:2006, (Revision of ISO 13779-2:2008) ISO 11607-1:2006/Amd 1:2014) ISO/FDIS Implants for surgery — Hy- TC 204 Intelligent transport 13779-3 droxyapatite — Part 3: Chemical systems analysis and characterization 2018-10-25 of crystallinity ratio and phase ISO/FDIS Electronic fee collection — purity 16407-2 Evaluation of equipment for con- (Revision of ISO 13779-3:2008) formity to ISO 17575-1 — Part 2: 2018-10-06 Abstract test suite ISO/FDIS Implants for surgery — Hy- (Revision of ISO/TS 13779-4 droxyapatite — Part 4: Deter- 16407-2:2012) mination of coating adhesion 2018-10-25 strength ISO/FDIS Electronic fee collection — (Revision of ISO 13779-4:2002) 16410-2 Evaluation of equipment for con- formity to ISO 17575-3 — Part 2: 2018-09-29 TC 155 Nickel and nickel alloys Abstract test suite ISO/FDIS Nickel alloys — Determination of (Revision of ISO/TS 23166 tantalum — Inductively coupled 16410-2:2012) plasma optical emission spectro- 2018-10-23 TC 206 Fine ceramics metric method ISO/FDIS Fine ceramics (advanced ceram- TC 156 Corrosion of metals and 17167 ics, advanced technical ceram- alloys ics) — Mechanical properties 2018-10-26 ISO/FDIS Corrosion of metals and alloys — of monolithic ceramics at room 21153 Measurement of environmentally temperature — Determination of assisted small crack growth rate 2018-10-17 flexural strength by the ring-on- ring test TC 157 Non-systemic contra- TC 210 Quality management and ceptives and STI barrier corresponding general as- prophylactics pects for medical devices ISO/FDIS Additional lubricants for male ISO/FDIS Medical devices — Connectors 19671 natural rubber latex condoms — 18250-1 for reservoir delivery systems for Effect on condom strength 2018-09-29 healthcare applications — Part 1: 2018-10-19 General requirements and com- mon test methods TC 158 Analysis of gases TC 212 Clinical laboratory testing ISO/FDIS Gas analysis — General quality and in vitro diagnostic test 14167 aspects and metrological trace- ability of calibration gas mixtures 2018-10-18 systems ISO/FDIS Molecular in vitro diagnostic (Revision of ISO/TS 14167:2003) 20166-1 examinations — Specifications for pre-examination processes 2018-10-23 TC 172 Optics and photonics for formalin-fixed and paraffin- ISO/FDIS Optics and photonics — Specifi- embedded (FFPE) tissue — Part 12123 cation of raw optical glass 1: Isolated RNA

ISO/FDIS Molecular in vitro diagnostic (Revision of ISO 12123:2010) 20166-2 examinations — Specifications TC 180 Solar energy for pre-examinations processes 2018-10-23 for formalin-fixed and paraffin- ISO/FDIS 9060 Solar energy — Specification embedded (FFPE) tissue — Part and classification of instruments 2: Isolated proteins for measuring hemispherical 2018-10-03 solar and direct solar radiation TC 215 Health informatics (Revision of ISO 9060:1990) TC 182 Geotechnics

ISO Update, Supplement to ISO Focus -- September 2018 11 ISO/IEEE FDIS Health informatics — Personal ISO/IEC FDIS Information technology — Open 11073-10207 health device communication — 30118-3 Connectivity Foundation (OCF) Part 10207: Domain information 2019-01-12 Specification — Part 3: Bridging 2018-10-13 and service model for service- specification oriented point-of-care medical ISO/IEC FDIS Information technology — Open device communication 30118-4 Connectivity Foundation (OCF) ISO/IEEE FDIS Health informatics — Personal Specification — Part 4: Resource 2018-10-16 11073-10419 health device communication — type specification Part 10419: Device specialization 2019-01-12 ISO/IEC FDIS Information technology — Open — Insulin pump 30118-5 Connectivity Foundation (OCF) (Revision of ISO/IEEE Specification — Part 5: Smart 2018-10-16 11073-10419:2016) home device specification ISO/FDIS Health informatics — Syntax to ISO/IEC FDIS Information technology — Open 13120 represent the content of health- 30118-6 Connectivity Foundation (OCF) care classification systems — 2018-10-16 Specification — Part 6: Resource 2018-10-16 Classification Markup Language to AllJoyn interface mapping (ClaML) specification (Revision of ISO 13120:2013) ISO/IEC/IEEE Information technology — Tel- TC 219 Floor coverings 8802-3:2017/ ecommunications and informa- ISO/FDIS Resilient and textile floor-cov- FDAmd 10 tion exchange between systems 2018-12-27 24342 erings — Determination of side — Local and metropolitan area length, edge straightness and 2018-10-03 networks — Specific require- squareness of tiles ments — Part 3: Standard for (Revision of ISO 24342:2007) Ethernet — Amendment 10: Me- dia access control parameters, TC 251 Asset management physical layers, and manage- ISO/FDIS Asset management — Manage- ment parameters for 200 Gb/s 55002 ment systems — Guidelines for and 400 Gb/s operation the application of ISO 55001 2018-10-12 ISO/IEC/IEEE Information technology — Tele- 8802-3:2017/ communications and information (Revision of ISO 55002:2014) FDAmd 11 exchange between systems — 2018-12-27 TC 281 Fine bubble technology Local and metropolitan area net- works — Specific requirements ISO/FDIS Fine bubble technology — Sam- — Part 3: Standard for Ethernet 20298-1 pling and sample preparation for — Amendment 11: Physical layer measurement — Part 1: Ultrafine 2018-10-19 and management parameters for bubble dispersion in water serial 25 Gb/s ethernet operation ISO/FDIS Fine bubble technology — over single-mode fiber 20480-2 General principles for usage and ISO/IEC/IEEE Information technology — Tel- measurement of fine bubbles 2018-10-16 8802-A:2015/ ecommunications and informa- — Part 2: Categorization of the FDAmd 2 tion exchange between systems 2018-12-27 attributes of fine bubbles — Local and metropolitan area TC 282 Water reuse networks — Part A: Overview and architecture — Amendment ISO/FDIS Water reuse — Vocabulary 2: Local medium access control 20670 (MAC) address usage 2018-10-06 ISO/IEC/IEEE Information technology — Tel- 8802-11:2018/ ecommunications and informa- ISO/FDIS Guidelines for performance FDAmd 1 tion exchange between systems 2018-12-27 20468-1 evaluation of treatment technolo- — Local and metropolitan area gies for water reuse systems — 2018-10-02 networks — Specific require- Part 1: General ments — Part 11: Wireless LAN ISO/FDIS Guidelines for water quality medium access control (MAC) 20469 grade classification for water and physical layer (PHY) speci- reuse 2018-10-06 fications — Amendment 1: Fast initial link setup TC 292 Security and resilience ISO/IEC/IEEE Information technology — Tel-

ISO/FDIS Security and resilience — Emer- 8802-1Q:2016/ ecommunications and informa- 2019-01-04 22320 gency management — Guide- FDAmd 6 tion exchange between systems

lines for incident management 2018-10-04 — Local and metropolitan area networks — Specific require- ments — Part 1Q: Bridges and (Revision of ISO 22320:2011) bridged networks — Amend- JTC 1 Information technology ment 6: Per-stream filtering and ISO/IEC FDIS Information technology — Open policing 30118-1 Connectivity Foundation (OCF) ISO/IEC/IEEE Information technology — Tel- Specification — Part 1: Core 2018-10-16 8802-1Q:2016/ ecommunications and informa- specification FDAmd 7 tion exchange between systems 2019-01-04 ISO/IEC FDIS Information technology — Open — Local and metropolitan area 30118-2 Connectivity Foundation (OCF) networks — Specific require- Specification — Part 2: Security 2018-10-16 ments — Part 1Q: Bridges and specification bridged networks — Amendment 7: Cyclic queuing and forwarding

12 ISO Update, Supplement to ISO Focus -- September 2018 (Revision of ISO/IEC 13818- ISO/IEC/ Information technology — Tele- 1:2018, ISO/IEC 13818-1:2018/ IEEE FDIS communications and information Amd 1:2018, ISO/IEC 13818- 8802-1CB exchange between systems — 2018-12-27 1:2018/DAmd 2, ISO/IEC 13818- Local and metropolitan area net- 1:2018/DAmd 3) works — Specific requirements — Part 1CB: Frame replicaton ISO/IEC Information technology — Cod- and elimination for reliability 14496-5:2001/ ing of audio-visual objects FDAmd 43 — Part 5: Reference software 2018-10-17 ISO/IEC/IEEE Systems and software engi- — Amendment 43: New levels FDIS 24748-7 neering — Life cycle manage- of ALS simple profile, SBR ment — Part 7: Application of 2018-12-25 enhancements systems engineering on defense programs ISO/IEC FDIS Information technology — Cod- 14496-14 ing of audio-visual objects — ISO/IEC/IEEE Systems and software engineer- Part 14: MP4 file format 2018-10-24 FDIS 24748-8 ing — Life cycle management

— Part 8: Technical reviews and 2018-12-25 audits on defense programs (Revision of ISO/IEC 14496- 14:2003, ISO/IEC 14496- ISO/IEC FDIS Information technology — Soft- 14:2003/Cor 1:2006, ISO/IEC 26553 ware and systems engineering — 14496-14:2003/Amd 1:2010) Tools and methods for product 2018-10-19 line realization ISO/IEC FDIS Information technology — High 23008-9 efficiency coding and media ISO/IEC FDIS Information technology — Soft- delivery in heterogeneous en- 2018-10-19 26556 ware and systems engineering — vironments — Part 9: 3D Audio Tools and methods for product 2018-10-19 conformance testing line organizational management ISO/IEC FDIS Information technology — Au- ISO/IEC/IEEE Information technology — Rec- 29167-22 tomatic identification and data FDIS 41062 ommended practice for software capture techniques — Part 22: 2018-10-16 acquisition 2018-12-25 Crypto suite SPECK secu- rity services for air interface ISO/IEC/IEEE Software engineering — Guide- communications FDIS 90003 lines for the application of ISO ISO/IEC FDIS Information technology — User 9001:2015 to computer software 2018-10-13 29138-1 interface accessibility — Part 1: User accessibility needs 2018-10-15 (Revision of ISO/IEC 90003:2014) (Revision of ISO/IEC TR ISO/IEC FDIS IT Security techniques — Hash- 29138-1:2009) 10118-3.2 functions — Part 3: Dedicated hash-functions 2018-10-06

(Revision of ISO/IEC 10118- 3:2004, ISO/IEC 10118-3:2004/ Amd 1:2006, ISO/IEC 10118- 3:2004/Cor 1:2011) ISO/IEC FDIS IT Security techniques — Digital 14888-3 signatures with appendix — Part 3: Discrete logarithm based 2018-10-10 Standards published mechanisms (Revision of ISO/IEC 14888- 3:2016, ISO/IEC 14888-3:2016/ New International Standards published between 01 August and 31 DAmd 1) August 2018 ISO/IEC FDIS Privacy enhancing data de- 20889 identification terminology and 1 delayed publication of language version classification of techniques 2018-10-12 2 corrected version 3 multilingual document ISO/IEC FDIS Information technology — Se- 21878 curity techniques — Security guidelines for design and imple- 2018-10-19 Price mentation of virtualized servers group ISO/IEC Information technology — Secu- 24760-1:2011/ rity techniques — A framework IIW International Institute of FDAmd 1 for identity management — Part 2018-10-05 Welding 1: Terminology and concepts — Amendment 1: Additional ISO 3690:2018 en Welding and allied processes — terminology and concepts Determination of hydrogen content in arc weld metal D ISO/IEC FDIS Information technology — Secu- 29147 rity techniques — Vulnerability disclosure 2018-10-03 ISO 8249:2018 en Welding — Determination of Ferrite fr Number (FN) in austenitic and duplex (Revision of ISO/IEC ferritic-austenitic Cr-Ni stainless steel E 29147:2014) weld metals ISO/IEC FDIS Information technology — Ge- TC 2 Fasteners 13818-1 neric coding of moving pictures and associated audio informa- 2018-10-02 tion — Part 1: Systems

ISO Update, Supplement to ISO Focus -- September 2018 13 ISO fr2 Fasteners — Types of inspection ISO en Gasoline engines with direct fuel 16228:2017 documents 21042:2018 injection (GDI engines) — Installation D of the high pressure fuel pump to the A engine ISO 4042:2018 en Fasteners — Electroplated coating ISO en Electrically propelled road vehicles — fr systems 20762:2018 Determination of power for propul- G sion of hybrid electric vehicle C

ISO en Fasteners — Non-electrolytically ap- TC 23 Tractors and machinery for 10683:2018 fr plied zinc flake coating systems agriculture and forestry E ISO en Equipment for crop protection — 10625:2018 fr Sprayer nozzles — Colour coding for TC 8 Ships and marine technology identification A ISO en Ships and marine technology — Ma- 16304:2018 rine environment protection — Ar- ISO 9644:2018 en Agricultural irrigation equipment — rangement and management of port D Pressure losses in irrigation valves — waste reception facilities Test method D ISO 8384:2018 en Ships and marine technology — Dredgers — Vocabulary ISO en Agricultural irrigation equipment — A 9912-4:2018 Filters for microirrigation — Part 4: Granulated media filters C TC 17 Steel ISO en Alloyed steels — Determination of ISO/TR en Agricultural irrigation equipment — 18632:2018 manganese — Potentiometric or 15155-1:2018 Test facilities for agricultural irrigation visual titration method B equipment — Part 1: General D

ISO 4978:2018 en Steel sheet and strip for welded gas TC 29 Small tools cylinders ISO/TS 13399- en Cutting tool data representation and B 314:2018 exchange — Part 314: Creation and exchange of 3D models — Cartridges D ISO en Steels for the reinforcement of con- for indexable inserts 15835-3:2018 crete — Reinforcement couplers for TC 31 Tyres, rims and valves mechanical splices of bars — Part 3: A Conformity assessment scheme ISO en Passenger car tyres — Spare unit 16992:2018 fr substitutive equipment (SUSE) TC 20 Aircraft and space vehicles C ISO 5884:2018 en Aerospace series — Fluid systems and components — Methods for TC 34 Food products system sampling and measuring C the solid particle contamination in ISO en Milk, milk products, infant formula hydraulic fluids 21422:2018 and adult nutritionals — Determina- tion of chloride — Potentiometric C ISO en Space systems — Safety require- titration method 14620-1:2018 ments — Part 1: System safety F ISO en Animal and vegetable fats and oils 18363-2:2018 — Determination of fatty-acid-bound chloropropanediols (MCPDs) and D ISO en Space systems — Integrated logistic glycidol by GC/MS — Part 2: Method 16091:2018 support using slow alkaline transesterifica- D tion and measurement for 2-MCPD, 3-MCPD and glycidol ISO en Space systems — Human-life activ- ISO en Vegetable fats and oils — Determina- 17763:2018 ity support systems and equipment 21846:2018 tion of composition of triacylglyc- integration in space flight B erols and composition and content C of diacylglycerols by capillary gas ISO/TS en Space environment (natural and artifi- chromatography 21979:2018 cial) — Procedure for obtaining worst TC 35 Paints and varnishes case and confidence level of fluence C using the quasi-dynamic model of ISO en Paints and varnishes — Determina- earth's radiation belts 2812-5:2018 fr tion of resistance to liquids — Part 5: Temperature-gradient oven method B TC 21 Equipment for fire protection and fire fighting ISO en Preparation of steel substrates ISO 7202:2018 en Fire protection — Fire extinguishing 11124-1:2018 fr before application of paints and media — Powder related products — Specifications A E for metallic blast-cleaning abrasives — Part 1: General introduction and TC 22 Road vehicles classification ISO en Preparation of steel substrates before ISO en Road vehicles — Standardized ac- 11124-2:2018 fr application of paints and related 18541-5:2018 cess to automotive repair and main- products — Specifications for metal- A tenance information (RMI) — Part 5: F lic blast-cleaning abrasives — Part 2: Heavy duty specific provision Chilled-iron grit

14 ISO Update, Supplement to ISO Focus -- September 2018 ISO en Preparation of steel substrates before TC 43 Acoustics 11124-4:2018 fr application of paints and related ISO/TS en Acoustics — Soundscape — Part products — Specifications for metal- B 12913-2:2018 2: Data collection and reporting lic blast-cleaning abrasives — Part 4: requirements E Low-carbon cast-steel shot

ISO en Preparation of steel substrates before 11125-2:2018 fr application of paints and related TC 44 Welding and allied processes products — Test methods for metal- A ISO 2401:2018 en Welding consumables — Covered lic blast-cleaning abrasives — Part electrodes — Determination of the 2: Determination of particle size efficiency, metal recovery and depo- A distribution sition coefficient ISO en Preparation of steel substrates before ISO en Welding consumables — Covered 11125-3:2018 fr application of paints and related 18275:2018 electrodes for manual metal arc products — Test methods for metallic A welding of high-strength steels E blast-cleaning abrasives — Part 3: — Classification Determination of hardness ISO en Welding consumables — Solid wires ISO en Preparation of steel substrates before 24373:2018 and rods for fusion welding of copper 11125-4:2018 fr application of paints and related and copper alloys — Classification B products — Test methods for metallic A blast-cleaning abrasives — Part 4: TC 45 Rubber and rubber products Determination of apparent density ISO/TS en Rubber — Framework for assessing ISO en Preparation of steel substrates before 22687:2018 the environmental fate of tyre and 11125-5:2018 fr application of paints and related road wear particles (TRWP) C products — Test methods for metallic A

blast-cleaning abrasives — Part 5: Determination of percentage defec- ISO 8789:2018 en Rubber hoses and hose assemblies tive particles and of microstructure for liquefied petroleum gas in motor vehicles — Specification B ISO en Preparation of steel substrates before

11125-6:2018 fr application of paints and related products — Test methods for metallic A ISO 48-1:2018 en Rubber, vulcanized or thermoplastic blast-cleaning abrasives — Part 6: fr — Determination of hardness — Part Determination of foreign matter 1: Introduction and guidance A

ISO en Preparation of steel substrates before 11126-1:2018 fr application of paints and related ISO 48-2:2018 en Rubber, vulcanized or thermoplastic products — Specifications for non- A fr — Determination of hardness — Part metallic blast-cleaning abrasives 2: Hardness between 10 IRHD and D — Part 1: General introduction and 100 IRHD classification ISO 48-3:2018 en Rubber, vulcanized or thermoplastic ISO en Preparation of steel substrates before fr — Determination of hardness — Part 11126-3:2018 fr application of paints and related 3: Dead-load hardness using the very B products — Specifications for non- A low rubber hardness (VLRH) scale metallic blast-cleaning abrasives — ISO 48-4:2018 en Rubber, vulcanized or thermoplastic Part 3: Copper refinery slag fr — Determination of hardness — Part ISO en Preparation of steel substrates before 4: Indentation hardness by durometer C 11126-4:2018 fr application of paints and related method (Shore hardness) products — Specifications for non- A ISO 48-5:2018 en Rubber, vulcanized or thermoplastic metallic blast-cleaning abrasives — fr — Determination of hardness — Part Part 4: Coal furnace slag 5: Indentation hardness by IRHD A ISO en Preparation of steel substrates before pocket meter method 11126-6:2018 fr application of paints and related ISO 48-6:2018 en Rubber, vulcanized or thermoplastic products — Specifications for non- A fr — Determination of hardness — Part metallic blast-cleaning abrasives — 6: Apparent hardness of rubber-cov- A Part 6: Iron and steel slags ered rollers by IRHD method ISO en Preparation of steel substrates before ISO 48-7:2018 en Rubber, vulcanized or thermoplastic 11126-7:2018 fr application of paints and related fr — Determination of hardness — Part products — Specifications for non- A 7: Apparent hardness of rubber-cov- A metallic blast-cleaning abrasives — ered rollers by Shore-type durometer Part 7: Fused aluminium oxide method ISO en Preparation of steel substrates before ISO 48-8:2018 en Rubber, vulcanized or thermoplastic 11126-8:2018 fr application of paints and related fr — Determination of hardness — Part products — Specifications for non- A 8: Apparent hardness of rubber- B metallic blast-cleaning abrasives — covered rollers by Pusey and Jones Part 8: Olivine method TC 38 Textiles ISO 48-9:2018 en Rubber, vulcanized or thermoplastic ISO en Textiles — Qualitative and quantita- fr — Determination of hardness — Part 20418-2:2018 tive proteomic analysis of some 9: Calibration and verification of hard- D animal hair fibres — Part 2: Peptide D ness testers detection using MALDI-TOF MS ISO fr1 Rubber — Measurement of vulcani- TC 42 Photography 6502-1:2018 zation characteristics using curem- eters — Part 1: Introduction C ISO en Imaging materials — Colour images 18935:2018 — Determination of water resistance of printed colour images B

ISO Update, Supplement to ISO Focus -- September 2018 15 ISO fr1 Rubber — Measurement of vul- TC 67 Materials, equipment and off- 6502-2:2018 canization characteristics using shore structures for petroleum, curemeters — Part 2: Oscillating disc C petrochemical and natural gas curemeter industries ISO fr1 Rubber — Measurement of vulcani- ISO/TR en Petroleum and natural gas industries 6502-3:2018 zation characteristics using curem- 10400:2018 — Formulae and calculations for eters — Part 3: Rotorless curemeter D the properties of casing, tubing, drill H

pipe and line pipe used as casing or ISO 127:2018 en Rubber, natural latex concentrate — tubing Determination of KOH number TC 72 Textile machinery and B accessories ISO 1419:2018 en Rubber- or plastics-coated fabrics — ISO en Textile machinery — Noise test Accelerated-ageing tests 9902-6:2018 code — Part 6: Fabric manufacturing A machinery C

TC 54 Essential oils TC 76 Transfusion, infusion and injection, and blood process- ISO 4720:2018 en Essential oils — Nomenclature ing equipment for medical and fr D pharmaceutical use ISO en Injection containers and accesso- TC 60 Gears 8362-1:2018 ries — Part 1: Injection vials made of glass tubing B ISO/TS en Calculation of load capacity of spur 6336-22:2018 and helical gears — Part 22: Calcula- tion of micropitting load capacity F TC 79 Light metals and their alloys ISO 2085:2018 en Anodizing of aluminium and its alloys TC 61 Plastics — Check for continuity of thin anodic oxidation coatings — Copper sulfate A ISO en Plastics moulded parts — Tolerances test 20457:2018 and acceptance conditions ISO 6581:2018 en Anodizing of aluminium and its alloys E — Determination of the comparative

fastness to ultraviolet light and heat A ISO en Plastics — Determination of fracture of coloured anodic oxidation coatings 17281:2018 toughness (GIC and KIC) at moder- ISO 8251:2018 en Anodizing of aluminium and its alloys ately high loading rates (1 m/s) E fr — Measurement of abrasion resist-

ance of anodic oxidation coatings E ISO en Plastics — Methods for marine 15314:2018 exposure ISO en Magnesium lithium alloys — Deter- B 20258:2018 mination of lithium — Inductively

coupled plasma optical emission B ISO fr1 Plastics — Poly(phenylene sulfide) spectrometric method 20558-2:2018 (PPS) moulding and extrusion materials — Part 2: Preparation of A TC 84 Devices for administration test specimen and determination of of medicinal products and properties catheters ISO en Plastics — Polyketone (PK) mould- ISO en2 Sterile urethral catheters for single 21970-1:2018 fr ing and extrusion materials — Part 20696:2018 fr2 use 1: Designation system and basis for B E specifications ISO 6238:2018 en Adhesives — Wood-to-wood adhe- ISO en2 Sterile drainage catheters and acces- sive bonds — Determination of shear 20697:2018 fr2 sory devices for single use strength by compressive loading B F

ISO en Carbon fibre — Determination of TC 106 Dentistry 11567:2018 filament diameter and cross-sectional ISO en Dentistry — Powered polymerization area B 10650:2018 fr activators C ISO en Fibre-reinforced plastic compos- 19927:2018 ites — Determination of interlaminar TC 107 Metallic and other inorganic strength and modulus by double D beam shear test coatings ISO 4531:2018 en Vitreous and porcelain enamels — ISO en Fibre-reinforced plastic compositess fr Release from enamelled articles in 20975-2:2018 — Determination of laminate through- contact with food — Methods of test B thickness properties — Part 2: Deter- C and limits mination of the elastic modulus, the strength and the Weibull size effects TC 108 Mechanical vibration, shock by flexural test of unidirectional lami- and condition monitoring nate, for carbon-fibre based systems ISO en Mechanical vibration — Measure- ISO en Determination of the ultimate aerobic 20816-8:2018 fr ment and evaluation of machine 14852:2018 fr biodegradability of plastic materials vibration — Part 8: Reciprocating E in an aqueous medium — Method by D compressor systems analysis of evolved carbon dioxide

16 ISO Update, Supplement to ISO Focus -- September 2018 TC 111 Round steel link chains, chain ISO en Water quality — Determination of slings, components and 19040-3:2018 the estrogenic potential of water and accessories waste water — Part 3: In vitro human F cell-based reporter gene assay ISO 1835:2018 en Round steel short link chains for lifting purposes — Medium tolerance TC 150 Implants for surgery sling chains — Grade 4, stainless C ISO en2 Non-active surgical implants — steel 14607:2018 fr2 Mammary implants — Particular TC 113 Hydrometry requirements F

ISO 9123:2017 fr1 Hydrometry — Stage-fall-discharge relationships ISO en Implants for surgery — Partial and E 7206-10:2018 fr total hip-joint prostheses — Part 10: Determination of resistance to static B load of modular femoral heads TC 123 Plain bearings ISO 14242- en Implants for surgery — Wear of total ISO en Plain bearings — Fluid film bearing 1:2014/Amd fr hip-joint prostheses — Part 1: Load- 22507:2018 materials for vehicular turbocharger 1:2018 ing and displacement parameters for XZ B wear-testing machines and corre- sponding environmental conditions TC 126 Tobacco and tobacco products for test — Amendment 1 ISO en Tobacco and tobacco products — TC 156 Corrosion of metals and alloys 21045:2018 fr Determination of ammonia — Method ISO en Corrosion of metals and alloys — using ion chromatographic analysis B 7539-6:2018 fr Stress corrosion testing — Part 6: Preparation and use of precracked F TC 134 Fertilizers, soil conditioners specimens for tests under constant and beneficial substances load or constant displacement ISO fr1 Corrosion of metals and alloys — ISO en Fertilizers and soil conditioners 19280:2017 Measurement of critical crevice 19822:2018 — Determination of humic and hydro- temperature for cylindrical crevice C phobic fulvic acids concentrations in C geometries in ferric chloride solution fertilizer materials TC 135 Non-destructive testing TC 159 Ergonomics ISO en Ergonomics of human-system inter- ISO en Non-destructive testing — Industrial 9241-306:2018 action — Part 306: Field assessment 11699-2:2018 fr radiographic films — Part 2: Control methods for electronic visual displays G of film processing by means of refer- B

ence values ISO en Non-destructive testing — Image TC 163 Thermal performance and 19232-5:2018 fr quality of radiographs — Part 5: De- energy use in the built termination of the image unsharpness B environment and basic spatial resolution value ISO en Thermal insulation — Building ele- using duplex wire-type image quality 9869-2:2018 ments — In-situ measurement of indicators thermal resistance and thermal trans- E TC 138 Plastics pipes, fittings and mittance — Part 2: Infrared method valves for the transport of for frame structure dwelling fluids TC 164 Mechanical testing of metals ISO en Plastics piping systems for renova- ISO 204:2018 en Metallic materials — Uniaxial creep 11297-3:2018 fr tion of underground drainage and fr testing in tension — Method of test sewerage networks under pressure C G — Part 3: Lining with close-fit pipes ISO en Plastics piping systems for renova- TC 172 Optics and photonics 11298-3:2018 fr tion of underground water supply ISO en Optics and photonics — Opti- networks — Part 3: Lining with close- C 9211-7:2018 cal coatings — Part 7: Minimum fit pipes requirements for neutral beam splitter A TC 146 Air quality coatings ISO en Indoor air — Part 34: Strategies TC 182 Geotechnics 16000-34:2018 fr for the measurement of airborne ISO en Geotechnical investigation and test- particles F 22477-5:2018 ing — Testing of geotechnical struc-

tures — Part 5: Testing of grouted F TC 147 Water quality anchors ISO en Water quality — Plutonium and nep- TC 184 Automation systems and 20899:2018 fr tunium — Test method using ICP-MS integration C ISO/TS en Industrial automation systems and 15926-12:2018 integration — Integration of life-cycle ISO en Water quality — Determination of data for process plants including oil G 19040-1:2018 the estrogenic potential of water and and gas production facilities — Part waste water — Part 1: Yeast estrogen G 12: Life-cycle integration ontology screen (Saccharomyces cerevisiae) represented in Web Ontology Lan- ISO en Water quality — Determination of guage (OWL) 19040-2:2018 the estrogenic potential of water and waste water — Part 2: Yeast estrogen G screen (A-YES, Arxula adeninivorans)

ISO Update, Supplement to ISO Focus -- September 2018 17 ISO en Industrial automation systems and ISO en Fine ceramics (advanced ceramics, 15926-13:2018 integration — Integration of life-cycle 21819-2:2018 advanced technical ceramics) — data for process plants including H Characteristic of piezoelectric prop- B oil and gas production facilities — erties under high-load conditions — Part 13: Integrated asset planning Part 2: Electrical transient response life-cycle method under high vibration levels ISO en Industrial automation systems and TC 207 Environmental management 16100-6:2018 integration — Manufacturing software ISO en Greenhouse gases — Carbon foot- capability profiling for interoperabil- G 14067:2018 fr print of products — Requirements ity — Part 6: Interface services and and guidelines for quantification F protocols for matching profiles based

on multiple capability class structures TC 209 Cleanrooms and associated TC 190 Soil quality controlled environments ISO en Soil quality — Guidance on the deter- 19258:2018 fr mination of background values ISO en Cleanrooms and associated con- D 14644-12:2018 trolled environments — Part 12: Specifications for monitoring air B cleanliness by nanoscale particle TC 194 Biological and clinical evalua- concentration tion of medical devices TC 210 Quality management and cor- ISO en Biological evaluation of medical responding general aspects for 10993-1:2018 fr devices — Part 1: Evaluation and medical devices testing within a risk management F process ISO en Medical devices — Connectors 18250-8:2018 for reservoir delivery systems for TC 195 Building construction machin- healthcare applications — Part 8: D ery and equipment Citrate-based anticoagulant solution ISO en Building construction machinery and for apheresis applications 19711-1:2018 equipment — Truck mixers — Part TC 215 Health informatics 1: Terminology and commercial A specifications ISO/IEEE en Health informatics — Point-of-care 11073- medical device communication — TC 197 Hydrogen technologies 20702:2018 Part 20702: Medical devices commu- F ISO en Transportable gas storage devices nication profile for web services 16111:2018 — Hydrogen absorbed in reversible TC 249 Traditional Chinese medicine metal hydride F ISO en Traditional Chinese medicine — Infra- 20493:2018 red moxibustion-like instrument TC 198 Sterilization of health care B products ISO en Sterilization of health care prod- TC 272 Forensic sciences 11139:2018 fr ucts — Vocabulary of terms used in ISO en Forensic sciences — Part 1: Terms sterilization and related equipment A 21043-1:2018 fr and definitions and process standards A ISO en Sterilization of health care products 18472:2018 fr — Biological and chemical indicators ISO en Forensic sciences — Part 2: Recogni- — Test equipment E 21043-2:2018 fr tion, recording, collecting, transport

and storage of items C TC 204 Intelligent transport systems ISO en Intelligent transport systems (ITS) — TC 276 Biotechnology 17572-2:2018 Location referencing for geographic ISO en Biotechnology — Biobanking — Gen- databases — Part 2: Pre-coded loca- G 20387:2018 fr eral requirements for biobanking tion references (pre-coded profile) F ISO en Intelligent transport systems — Road 19638:2018 boundary departure prevention systems (RBDPS) — Performance D TC 292 Security and resilience requirements and test procedures ISO en Security and resilience — Authentic- 22380:2018 ity, integrity and trust for products TC 206 Fine ceramics and documents — General prin- C ISO en Fine ceramics (advanced ceramics, ciples for product fraud risk and 19629:2018 fr advanced technical ceramics) — countermeasures Thermophysical properties of ceramic B composites — Determination of TC 299 Robotics unidimensional thermal diffusivity by ISO/TR en Robotics — Safety design for flash method 20218-1:2018 industrial robot systems — Part 1: End-effectors D ISO en Fine ceramics (advanced ceram-

21819-1:2018 ics, advanced technical ceramics) — Characteristic of piezoelectric B TC 301 Energy management and en- properties under high-load conditions ergy savings — Part 1: Resonant-antiresonant method under high-temperature ISO en Energy management systems — Re- conditions 50001:2018 fr quirements with guidance for use E

18 ISO Update, Supplement to ISO Focus -- September 2018 IULTCS International Union of Leather ISO/IEC en Information technology — Cod- Technologists and Chemists 14496-3:2009/ ing of audio-visual objects — Part Societies Amd 7:2018 3: Audio — Amendment 7: SBR XZ enhancements ISO en Leather — Tests for colour fast- 11640:2018 fr ness — Colour fastness to cycles of ISO/IEC en Information technology — Coding to-and-fro rubbing A 14496- of audio-visual objects — Part 26: 26:2010/Amd Audio conformance — Amendment XZ 5:2018 5: Conformance for new levels of ALS JTC 1 Information technology simple profile, SBR enhancements ISO/IEC en Systems and software engineering ISO/IEC en Information technology — High ef- 29110-4- — Lifecycle profiles for very small 23008-6:2018 ficiency coding and media delivery in 3:2018 entities (VSEs) — Part 4-3: Service G heterogeneous environments — Part A delivery — Profile specification 6: 3D audio reference software ISO/IEC en Identification cards — Recording ISO/IEC en Information technology — High ef- 7811-1:2018 technique — Part 1: Embossing 23008-8:2018 ficiency coding and media delivery in D heterogeneous environments — Part H 8: Conformance specification for ISO/IEC en Identification cards — Recording HEVC 7811-2:2018 technique — Part 2: Magnetic stripe: ISO/IEC TR en Information technology — High ef- Low coercivity D 23008-14:2018 ficiency coding and media delivery in heterogeneous environments — Part F ISO/IEC en Identification cards — Recording 14: Conversion and coding practices 7811-6:2018 technique — Part 6: Magnetic stripe: for HDR/WCG Y'CbCr 4:2:0 video High coercivity D with PQ transfer characteristics ISO/IEC TR en Information technology — High ef- ISO/IEC en Identification cards — Recording 23008-15:2018 ficiency coding and media delivery in 7811-7:2018 technique — Part 7: Magnetic stripe: heterogeneous environments — Part F High coercivity, high density D 15: Signalling, backward compatibil- ity and display adaptation for HDR/ WCG video ISO/IEC 7816- en Identification cards — Integrated 4:2013/Amd circuit cards — Part 4: Organization, ISO/IEC en Information technology — Conform- 2:2018 security and commands for inter- XZ 19823-19:2018 ance test methods for security ser- change — Amendment 2: Waiting vice crypto suites — Part 19: Crypto C time management suite RAMON ISO/IEC en Identification cards — Test methods ISO/IEC en Internet of Things (loT) — Reference 10373-3:2018 — Part 3: Integrated circuit cards 30141:2018 Architecture with contacts and related interface F H devices ISO/IEC en Information technology — Imple- 14763-3:2014/ mentation and operation of customer Amd 1:2018 premises cabling — Part 3: Testing of C optical fibre cabling — Amendment 1 ISO/IEC en IT security techniques — Compe- 19896-2:2018 tence requirements for information security testers and evaluators E — Part 2: Knowledge, skills and ef- fectiveness requirements for ISO/IEC Standards confirmed 19790 testers ISO/IEC en IT security techniques — Compe- 19896-3:2018 tence requirements for information The following International Standards are confimred for a five year security testers and evaluators E period: — Part 3: Knowledge, skills and ef- fectiveness requirements for ISO/IEC 15408 evaluators TC 2 Fasteners ISO/IEC fr1 Information technology — Security ISO 16583:2002 (reconfirmed) 27001:2013/ techniques — Information security ISO 272:1982 (reconfirmed) Cor 1:2014 management systems — Require- free ments — Technical Corrigendum 1 ISO 4755:1983 (reconfirmed) ISO/IEC fr1 Information technology — Security ISO 7378:1983 (reconfirmed) 27001:2013/ techniques — Information security ISO 8991:1986 (reconfirmed) Cor 2:2015 management systems — Require- free ments — Technical Corrigendum 2 ISO 15065:2005 (reconfirmed) ISO/IEC fr1 Information technology — Security ISO 4757:1983 (reconfirmed) 27002:2013/ techniques — Code of practice for TC 6 Paper, board and pulps Cor 1:2014 information security controls — Tech- free nical Corrigendum 1 ISO 8791-1:1986 (reconfirmed) ISO/IEC en Information technology — Security TC 8 Ships and marine technology 27011:2016/ techniques — Code of practice for ISO 16437:2012 Cor 1:2018 Information security controls based free on ISO/IEC 27002 for telecommuni- ISO 27991:2008 (reconfirmed) cations organizations — Technical ISO 15748-1:2002 (reconfirmed) Corrigendum 1 ISO 15748-2:2002 (reconfirmed)

ISO Update, Supplement to ISO Focus -- September 2018 19 ISO 15749-1:2004 (reconfirmed) ISO (reconfirmed) 10303-34:2001 ISO 15749-2:2004 (reconfirmed) ISO (reconfirmed) ISO 15749-3:2004 (reconfirmed) 10303-51:2005 ISO 15749-4:2004 (reconfirmed) ISO (reconfirmed) ISO 15749-5:2004 (reconfirmed) 10303-54:2005 ISO 16145-1:2012 ISO (reconfirmed) ISO 16145-2:2012 10303-104:2000 ISO 16145-3:2012 ISO (reconfirmed) 10303-107:2006 ISO 16145-4:2013 ISO (reconfirmed) ISO 16548:2012 10303-111:2007 TC 20 Aircraft and space vehicles ISO (reconfirmed) ISO 8816:1993 (reconfirmed) 10303-112:2006 ISO 8843:2005 (reconfirmed) ISO (reconfirmed) 10303-212:2001 ISO 13832:2013 ISO (reconfirmed) TC 38 Textiles 10303-219:2007 ISO 1833-26:2013 ISO (reconfirmed) ISO 6741-1:1989 (reconfirmed) 10303-227:2005 ISO 6741-2:1987 (reconfirmed) ISO 10303-233:2012 ISO 6741-3:1987 (reconfirmed) ISO (reconfirmed) TC 86 Refrigeration and air-conditioning 10303-236:2006 ISO 13971:2012 ISO (reconfirmed) TC 93 Starch (including derivatives and 10303-240:2005 by-products) ISO (reconfirmed) ISO 11212-4:1997 (reconfirmed) 10303-501:2000 ISO 11214:1996 (reconfirmed) ISO (reconfirmed) 10303-502:2000 ISO 11215:1998 (reconfirmed) ISO (reconfirmed) TC 94 Personal safety -- Personal protective 10303-505:2000 equipment ISO (reconfirmed) ISO 10333-5:2001 (reconfirmed) 10303-507:2001 ISO 10333-6:2004 (reconfirmed) ISO (reconfirmed) ISO 14567:1999 (reconfirmed) 10303-508:2001 ISO 16024:2005 (reconfirmed) ISO (reconfirmed) 10303-509:2001 ISO 22159:2007 (reconfirmed) ISO (reconfirmed) ISO 22846-1:2003 (reconfirmed) 10303-510:2000 ISO 22846-2:2012 (reconfirmed) ISO (reconfirmed) TC 100 Chains and chain sprockets for power 10303-511:2001 transmission and conveyors ISO (reconfirmed) ISO 3512:1992 (reconfirmed) 10303-513:2000 TC 110 Industrial trucks ISO (reconfirmed) 10303-515:2000 ISO 22881:2004 (reconfirmed) ISO (reconfirmed) TC 122 Packaging 10303-519:2000 ISO 17351:2013 ISO/TS TC 131 Fluid power systems 10303-1002:2014 ISO/TS ISO 14540:2013 10303-1003:2014 ISO 14541:2013 ISO/TS TC 160 Glass in building 10303-1008:2014 ISO 10291:1994 (reconfirmed) ISO/TS TC 184 Automation systems and integration 10303-1010:2014 ISO/TS (reconfirmed) ISO (reconfirmed) 10303-1011:2004 10303-14:2005 ISO/TS ISO (reconfirmed) 10303-1014:2014 10303-23:2000 ISO/TS (reconfirmed) ISO (reconfirmed) 10303-1015:2004 10303-24:2001 ISO/TS (reconfirmed) ISO (reconfirmed) 10303-1018:2004 10303-28:2007 ISO/TS 10303-1022:2014

20 ISO Update, Supplement to ISO Focus -- September 2018 ISO/TS (reconfirmed) ISO/TS 10303-1024:2004 10303-1136:2014 ISO/TS ISO/TS 10303-1030:2014 10303-1141:2014 ISO/TS ISO/TS 10303-1033:2014 10303-1142:2014 ISO/TS ISO/TS 10303-1034:2014 10303-1206:2014 ISO/TS (reconfirmed) ISO/TS (reconfirmed) 10303-1036:2004 10303-1210:2004 ISO/TS (reconfirmed) ISO/TS (reconfirmed) 10303-1039:2004 10303-1214:2004 ISO/TS ISO/TS (reconfirmed) 10303-1043:2014 10303-1217:2004 ISO/TS (reconfirmed) ISO/TS (reconfirmed) 10303-1044:2004 10303-1218:2004 ISO/TS ISO/TS (reconfirmed) 10303-1047:2014 10303-1228:2004 ISO/TS ISO/TS (reconfirmed) 10303-1049:2014 10303-1240:2004 ISO/TS ISO/TS (reconfirmed) 10303-1052:2014 10303-1243:2004 ISO/TS ISO/TS (reconfirmed) 10303-1057:2014 10303-1244:2004 ISO/TS ISO/TS (reconfirmed) 10303-1059:2014 10303-1245:2004 ISO/TS (reconfirmed) ISO/TS 10303-1060:2004 10303-1246:2014 ISO/TS ISO/TS (reconfirmed) 10303-1061:2014 10303-1249:2004 ISO/TS (reconfirmed) ISO/TS (reconfirmed) 10303-1065:2004 10303-1250:2004 ISO/TS ISO/TS (reconfirmed) 10303-1068:2014 10303-1253:2004 ISO/TS ISO/TS (reconfirmed) 10303-1070:2014 10303-1254:2004 ISO/TS ISO/TS (reconfirmed) 10303-1104:2014 10303-1257:2004 ISO/TS (reconfirmed) ISO/TS (reconfirmed) 10303-1105:2004 10303-1265:2004 ISO/TS ISO/TS (reconfirmed) 10303-1106:2014 10303-1272:2004 ISO/TS ISO/TS (reconfirmed) 10303-1109:2014 10303-1273:2004 ISO/TS ISO/TS 10303-1112:2014 10303-1275:2014 ISO/TS ISO/TS (reconfirmed) 10303-1114:2014 10303-1276:2004 ISO/TS ISO/TS (reconfirmed) 10303-1115:2014 10303-1277:2004 ISO/TS ISO/TS (reconfirmed) 10303-1121:2014 10303-1285:2004 ISO/TS (reconfirmed) ISO/TS (reconfirmed) 10303-1123:2004 10303-1286:2004 ISO/TS (reconfirmed) ISO/TS 10303-1124:2004 10303-1288:2014 ISO/TS ISO/TS (reconfirmed) 10303-1126:2014 10303-1294:2004 ISO/TS ISO/TS (reconfirmed) 10303-1127:2014 10303-1296:2004 ISO/TS (reconfirmed) ISO/TS (reconfirmed) 10303-1128:2004 10303-1298:2004 ISO/TS ISO/TS (reconfirmed) 10303-1132:2014 10303-1300:2004 ISO/TS (reconfirmed) ISO/TS (reconfirmed) 10303-1134:2004 10303-1301:2004

ISO Update, Supplement to ISO Focus -- September 2018 21 ISO/TS ISO/TS (reconfirmed) 10303-1316:2014 10303-1510:2004 ISO/TS ISO/TS 10303-1317:2014 10303-1511:2014 ISO/TS ISO/TS (reconfirmed) 10303-1320:2014 10303-1512:2004 ISO/TS (reconfirmed) ISO/TS 10303-1340:2004 10303-1603:2014 ISO/TS ISO/TS 10303-1341:2014 10303-1613:2014 ISO/TS ISO/TS 10303-1342:2014 10303-1637:2014 ISO/TS ISO/TS 10303-1344:2014 10303-1647:2014 ISO/TS ISO/TS 10303-1345:2014 10303-1651:2014 ISO/TS (reconfirmed) ISO 13584-1:2001 (reconfirmed) 10303-1357:2004 ISO (reconfirmed) ISO/TS (reconfirmed) 13584-24:2003 10303-1358:2004 ISO (reconfirmed) ISO/TS (reconfirmed) 13584-26:2000 10303-1364:2004 ISO (reconfirmed) ISO/TS (reconfirmed) 13584-501:2007 10303-1365:2004 ISO (reconfirmed) ISO/TS 13584-511:2006 10303-1372:2014 ISO 15531-1:2004 (reconfirmed) ISO/TS ISO (reconfirmed) 10303-1373:2014 15531-43:2006 ISO/TS ISO 15926-2:2003 (reconfirmed) 10303-1374:2014 ISO (reconfirmed) ISO/TS 18629-41:2006 10303-1375:2014 ISO (reconfirmed) ISO/TS 18629-43:2006 10303-1376:2014 TC 188 Small craft ISO/TS 10303-1377:2014 ISO 12215-2:2002 (reconfirmed) ISO/TS ISO 13590:2003 (reconfirmed) 10303-1378:2014 TC 192 Gas turbines ISO/TS ISO 3977-1:1997 (reconfirmed) 10303-1379:2014 ISO 3977-2:1997 (reconfirmed) ISO/TS 10303-1381:2014 ISO 3977-3:2004 (reconfirmed) ISO/TS ISO 3977-7:2002 (reconfirmed) 10303-1382:2014 ISO 3977-8:2002 (reconfirmed) ISO/TS TC 205 Building environment design 10303-1383:2014 ISO 13153:2012 ISO/TS 10303-1384:2014 TC 229 Nanotechnologies ISO/TS ISO/TS (reconfirmed) 10303-1385:2014 12805:2011 ISO/TS ISO/TS (reconfirmed) 10303-1386:2014 80004-5:2011 ISO/TS TMBG Technical Management Board - groups 10303-1387:2014 ISO 25639-1:2008 (reconfirmed) ISO/TS ISO 25639-2:2008 (reconfirmed) 10303-1403:2014 CASCO Committee on conformity assessment ISO/TS 10303-1453:2014 ISO/IEC (reconfirmed) 17007:2009 ISO/TS 10303-1470:2014 ISO/IEC TS 17021-5:2014 ISO/TS 10303-1491:2014 ISO/IEC TS 17021-6:2014 ISO/TS (reconfirmed) 10303-1501:2004 ISO/IEC TS 17021-7:2014 ISO/TS (reconfirmed) 10303-1502:2004

22 ISO Update, Supplement to ISO Focus -- September 2018 ISO/IEC 17024:2012 ISO/IEC 17065:2012 JTC 1 Information technology ISO/IEC 1001:2012 Meeting calendar ISO/IEC 29199-2:2012 The meeting calendar is available at https://www.iso.org/meeting-calendar.html

Standards withdrawn

Period from 01 August to 31 August 2018

TC 22 Road vehicles ISO 12405-1:2011 (replaced by ISO 12405-4:2018) ISO 12405-2:2012 (replaced by ISO 12405-4:2018) TC 23 Tractors and machinery for agriculture and forestry ISO/TR (replaced by ISO/TR 15155-1:2018) 15155:2005 TC 45 Rubber and rubber products ISO 48:2010 (replaced by ISO 48-2:2018) ISO 7267-1:2017 (replaced by ISO 48-6:2018) ISO 7267-2:2008 (replaced by ISO 48-7:2018) ISO 7267-3:2017 (replaced by ISO 48-8:2018) ISO 7619-1:2010 (replaced by ISO 48-4:2018) ISO 7619-2:2010 (replaced by ISO 48-5:2018) ISO 18517:2015 (replaced by ISO 48-1:2018) ISO 18898:2016 (replaced by ISO 48-9:2018) ISO 27588:2012 (replaced by ISO 48-3:2018) TC 60 Gears ISO/TR (replaced by ISO/TS 6336-22:2018) 15144-1:2014 TC 107 Metallic and other inorganic coatings ISO 4531-1:1998 (replaced by ISO 4531:2018) ISO 4531-2:1998 (replaced by ISO 4531:2018) TC 108 Mechanical vibration, shock and condi- tion monitoring ISO 10816-8:2014 (replaced by ISO 20816-8:2018) TC 135 Non-destructive testing ISO/TTA 3:2001 (replaced by ) TC 163 Thermal performance and energy use in the built environment ISO 9076-2:2008 (replaced by ) TC 198 Sterilization of health care products ISO/TS (replaced by ISO 11139:2018) 11139:2006 TC 207 Environmental management ISO/TS (replaced by ISO 14067:2018) 14067:2013

ISO Update, Supplement to ISO Focus -- September 2018 23