WAHL CLIPPER CLIPPER GUIDE FEATURES AND BENEFITS
5-STAR ADJUSTABLE FEATURES BENEFITS 2-HOLE STANDARD 3-HOLE STANDARD FEATURES BENEFITS
- Thin bottom blade 13˚ bevel with deeper teeth - Flat bottom blade allows closer cutting - Bottom blade 21˚ bevel has a backstripe - Easy to pick up and feed hair - Blade set can be adjusted to a zero-overlap - Precision Fades (ridges) - Glides through longer hair - On scalp tapering and fading techniques - Longer blade teeth -O scalp cutting techniques - Allow a 1mm-3mm cut length
5-STAR WEDGE FEATURES BENEFITS ADJUSTABLE 5-in-1 FEATURES BENEFITS
- Thin bottom blade bevel with deeper teeth - Flat bottom blade allows closer cutting - Snaps on and o 5-LEVEL CUTTING LENGTH ADJUSTMENT - Square, atter angle top blade teeth - Deeper bottom blade teeth allow for a longer feed - Taper lever located at the bottom of the blade (0,7MM - 3MM) - Longer teeth allow for an additional .02 cut length - Top cutting blade creates a “crunching” sound - Ideal for ambidextrous users - Eliminates the need for a 1½ attachment comb or a 1.5 blade - Creates a blunt cut look - Ideal for soft line fading and seamless blends DETACHABLE BLADES DETACHABLE
5-STAR STAGGER TOOTH FEATURES BENEFITS ADJUSTABLE ALL-IN-ONE FEATURES BENEFITS
- Thin bottom blade 13˚ bevel with deeper teeth - Flat bottom blade allows closer cutting - Snaps on and o FOR TEXTURE, CHUNKING & RAZOR - Staggered top blade, alternates with long and short - Staggered top blade allows for two di erent cutting paths - Taper lever located at the bottom of the blade Position 1 - light texturing, bulk removal blade teeth - Staggered top blade creates texture while cutting - Ideal for ambidextrous users Position 3 - aggressive texture, chunking - Blade set can be adjusted to a zero-overlap - Creates seamless blends when hard or soft line fading Position 5 - razor, soft edges, layering - Ideal for bulk hair removal DETACHABLE BLADES DETACHABLE
5-STAR BALDING 6X0 FEATURES BENEFITS SNAP-ON STANDARD FEATURES SPECIALTY SNAP-ON BLADES - Thin bottom blade 13˚ bevel with no backstripe - Flat bottom blade allows closer cutting - Snaps on and o SPECIALTY SNAP-ON BLADES (ridges) - Ultra close full size trimming blade - Consistent cutting length - Fine (Trimming) Blade - Extremely thin, short blade teeth - Ideal for outlining - Ideal for ambidextrous users - Texturizing Blade - Full head Balding - Razor Blade - Beta (Chunking) Blade DETACHABLE BLADES DETACHABLE BLADE ALIGNMENT BLADE ADJUSTMENT LEVER MOTOR INFORMATION WAHL MAINTENANCE GUIDELINES When aligning the blades, it is important that the movable top blade The blade adjustment lever regulates the cut length. * Failure to properly disinfect your clipper can result in cross contamination and infections. DOES NOT EXTEND OVER THE STATIONARY BOTTOM BLADE. This lever allows for easy tapering, fading, and blending Standard motor: an electro-magnetic motor (arm and If the top blade overlap occurs, there is a potential to cause skin abrasions. coil), e cient power that is standard on basic clippers.
V5000 motor: a strong electro-magnetic motor (arm and CORRECT INCORRECT coil), more power than the standard motor.
V9000 motor: a strong electro-magnetic motor (arm and STEP 1. CLEAN STEP 2. SANITIZE coil) slightly stronger than the V5000, cooler running and USE CLIPPER BRUSH TO RID BLADES SPRAY BLADES WITH HOSPITAL GRADE CLOSED OPEN DISINFECTANT* shortest cutting length longest cutting length energy e cient. OF DEBRIS
Rotary motor: a sealed motor with brushes. Has comparable power range to a V5000 and V9000 electro-magnetic motor. The movable top blade should not extend past the stationary bottom blade *On select corded and cordless clippers. For proper blade alignment and blade replacement procedures go to www.wahlpro.com to view our Vibrator Clipper Maintenance Guide. STEP 3. OIL STEP 4. STORE OIL CLIPPER USING 5-POINT STORE CLIPPER USING HANG HOOK IF PROVIDED OILING SYSTEM AND COVER BLADES WITH RED BLADE GUARD DO NOT WRAP CORD AROUND CLIPPER