tension board installation guide tension board installation guide
PANEL OVERVIEW (in)
4.688 A B C D E F G H I J K 18
17
Ø1/2 16
15
14
13 3.938
.750
11
10 48.000 9 3.938 8
3.938 7
.750 96.000 6
5 4
3 3.938
3.938 2.3752 1 2.750 3.938
12.000
2.375 7.875 7.875 3.938 9.375 2 tension board installation guide
PANEL OVERVIEW (mm)
A B C D E F G H I J K 18
120 17 16
15 14
13 100
20 11
10 1220 9 8
100 7 100
100
20 2440 6
5
4
100 3
2 100 60 1 70 100
305
200 200 100 60 240 3 tension board installation guide
T-NUT/LED SPACING (in)
4.688
Ø1/2
3.938
.750
48.000
3.938
3.938
96.000 4 tension board installation guide
T-NUT/LED SPACING (in)
All holes should be drilled as detailed in the included drawing. T-nut and LED holes may be drilled at .5in. T-nuts are to be installed for the Set A, B, C, and Foothold positions. LED holes are located beneath each T-nut hole.
The Tension Board can be built in the following dimensions:
8ft x 12ft with kickboard 8ft x 10ft without kickboard
Columns A-K | Rows 1-18 | KB1&2 Columns A-K | Rows 1-15
8ft x 12ft without kickboard 5ft x 10ft without kickboard
Columns A-K | Rows 1-18 Columns B.5-I.5 | Rows 1-15
.750
3.938
3.938 2.375
2.750 3.938
12.000
2.375 7.875 7.875 3.938 9.375 5 tension board installation guide
T-NUT/LED SPACING (mm)
120
100
20
1220
100 100
100
2440 6 tension board installation guide
T-NUT/LED SPACING (mm)
All holes should be drilled as detailed in the included drawing. T-nut and LED holes may be drilled at 13mm. T-nuts are to be installed for the Set A, B, C, and Foothold positions. LED holes are located be- neath each T-nut hole.
The Tension Board can be built in the following dimensions:
8ft x 12ft with kickboard 8ft x 10ft without kickboard
Columns A-K | Rows 1-18 | KB1&2 Columns A-K | Rows 1-15
8ft x 12ft without kickboard 5ft x 10ft without kickboard
Columns B.5-I.5 | Rows 1-15 Columns A-K | Rows 1-18 20
100
100 60
70 100
305
200 200 100 60 240 7 tension board installation guide
VARIABLE ANGLE
The Tension Board and the Tension Board app function with either an adjustable or a fixed angle wall. Whether you build an adjustable or a fixed angle wall, weecom r - mend consulting with a professional to insure that your wall is structurally sound and that you have properly installed a proper padding system. width 20° 25° 30° 35° 40° (recommended) 45° 50°
main wall height 8x12 Wall Heights
MAIN WALL KICKER ANGLE WIDTH HEIGHT HEIGHT 20° 4 ft. 1 3/16 in. 11 ft. 3 5/8 in. 9 1/2 in. - 12 in.
30° 6 ft. 10 ft. 4 3/16 in.9 1/2 in. - 12 in.
40° 7 ft. 8 3/8 in. 9 ft. 2 3/8 in. 9 1/2 in. - 12 in.
45° 8 ft. 6 in. 8 ft. 6 in. 9 1/2 in. - 12 in. kicker 50° 9 ft. 2 3/8 in. 7 ft. 8 3/8 in. 9 1/2 in. - 12 in. height
8 tension board installation guide
HOLDS OVERVIEW
Finger Bucket (s) Finger Bucket (m) Finger Bucket (l) Finger Bucket (xl) 30° Edge (s) FBS FBM FBL FBXL 30S
30° Edge (m) 30° Edge (l) Large Crimp (s) Large Crimp (m) Large Crimp (d) 30M 30L LCS LCM LCD
Flat Edge (s) Flat Edge (m) Round Edge (s) Round Edge (m) Round Edge (l) FLTS FLTM RES REM REL
Straight Pinch Tapered Pinch (i) Brick Pinch (s) Brick Pinch (l) Shal. Pinch (w) STP TPMI BPS BPL SHPW
Shal. Pinch (n) Shal. Pinch (e) Small Crimp (cv) Small Crimp (cc) 4” Knob SHPN SHPE SCV SCC 4
5” Ball (incut) 5” Ball (mod.incut) 6” Sloper 5I 5 6 Incut Foot Sloper Foot
9 tension board installation guide
SET A
V A / K B / J V 18 16 Finger Bucket (l) 18 Finger Bucket (xl) 17
15 Jug Ball 16 4” Knob
V 16 V 13 Tapered Pinch (m) 14 Finger Bucket (l) 15 11 Finger Bucket (m) 13 30 Edge (l)
10 4” Knob
V 8 Large Crimp (d) 14 V 4 Jug Ball 13 3 Finger Bucket (xl) C / I 12
D / H 11 V
15 Finger Bucket (s) V 13 Jug Ball 18 Jug Ball 10 12 Tapered Pinch (m) 17 Finger Bucket (m) 9 10 Jug Ball 16 Finger Bucket (l) 8 13 Finger Bucket (l) 7 Tapered Pinch (m) 11 Finger Bucket (l) 7 4 Large Crimp (m) 9 Finger Bucket (l) 6
3 Finger Bucket (s) 7 Large Crimp (m) V 5 V 6 Large Crimp (s) 4 E / G 4 4” Knob 3 17 Tapered Pinch (m) F 2 16 30° Edge (m) 1 14 Large Crimp (m) 18 4” Knob A B C D E F G H I J K 12 Large Crimp (d) 16 30° Edge (l) 13 4” Knob 11 Finger Bucket (l) 12 30° Edge (l) SUMMARY 10 Finger Bucket (m) 8 Large Crimp (d) Set A includes a higher concentration of incut holds 7 Finger Bucket (l) 7 4” Knob than Set B. When combined with the Foot Holds set, 4 Finger Bucket (s) 6 5” Ellipse Set A provides full functionality in the Tension Board 3 Finger Bucket (xl) 3 Finger Bucket (xl) app.
10 tension board installation guide
SET B
A / K B / J 18 18 Finger Bucket (s) 17 30° Edge (s) 17 17 Large Crimp (s) 15 Round Edge (m) 14 5” Ball (mod. incut) 12 30° Edge (s) 16 12 Large Crimp (m) 11 Brick Pinch (s) 15 9 Tapered Pinch (m) 9 Round Edge (m) 14 7 4” Knob 4 30° Edge (m) 7 30° Edge (s) 13 6 Finger Bucket (l) 12 C / I 5 30° Edge (s) 11 18 30° Edge (l) 10 D / H V 17 Round Edge (l) 9 16 Flat Edge (m) 15 Large Crimp (s) 8 14 Large Crimp (d) 14 Straight Pinch 7 11 30° Edge (s) 12 Flat Edge (m) 9 Large Crimp (s) 10 Tapered Pinch (m) 6 8 6” Sloper 5 6 5” Ball (mod. incut) 8 30° Edge (s) 2 Large Crimp (s) 5 30° Edge (m) 4 3 E / G F 2 18 Brick Pinch (l) 17 Round Edge (m) 1 15 Tapered Pinch (m) 15 6” Sloper A B C D E F G H I J K 13 Finger Bucket (s) 14 30 Edge (s) 9 Straight Pinch 11 Brick Pinch (s) SUMMARY 8 Round Edge (m) 10 Jug Ball 6 30° Edge (s) Set B includes holds that are more difficult than Set 9 Flat Edge (s) 5 Large Crimp (s) A. When combined with the Foot Holds set, Set B provides full functionality in the Tension Board app. 2 Large Crimp (m) 4 Round Edge (m)
11 tension board installation guide
SET C
A.5 / J.5 B.5 / I.5 18 10.5 Shal. Pinch (n) 15.5 Shal. Pinch (w) 17 9.5 Shal. Pinch (e) 14.5 Small Crimp (cv) 16 8.5 Small Crimp (cc) 13.5 Shal. Pinch (n) 15 7.5 Round Edge (s) 5.5 Shal. Pinch (n) 12.5 Small Crimp (cc) 14 4.5 Small Crimp (cc) 11.5 Small Crimp (cv) 13 3.5 Round Edge (s) 12 9.5 Small Crimp (cc) 11 C.5 / H.5 8.5 Shal. Pinch (w) 10 13.5 Shal. Pinch (e) 7.5 Small Crimp (cv) 9 11.5 Round Edge (s) 3.5 Small Crimp (cv) 8 6.5 Small Crimp (cv) 7 4.5 Round Edge (s) D.5 / G.5 6 E.5 / F.5 15.5 Shal. Pinch (e) 5 4 16.5 Small Crimp (cv) 14.5 Small Crimp (cv) 3 15.5 Shal. Pinch (n) 12.5 Small Crimp (cv) 2 13.5 Shal. Pinch (w) 11.5 Shal. Pinch (n) 12.5 Small Crimp (cv) 1 10.5 Shal . Pinch (e) A B C D E F G H I J K 11.5 Shal. Pinch (w) 10.5 Shal. Pinch (n) 8.5 Round Edge (s) SUMMARY 9.5 Small Crimp (cv) 6.5 Small Crimp (cc) Set C includes our smallest and most difficult holds. 8.5 Shal. Pinch (n) When combined with the Foot Holds set, Set C 4.5 Small Crimp (cc) 7.5 Small Crimp (cc) provides full functionality in the Tension Board app. We recommend bolting on Set C with button head 6.5 Shal. Pinch (w) 3.5 Shal. Pinch (w) bolts, but it can also be installed using only screws. 5.5 Small Crimp (cv) 4.5 Shal. Pinch (n) 3.5 Small Crimp (cv) 12 tension board installation guide
FOOT HOLD SET
MAIN WALL 18 A / K B / J 17 10 Incut Foot 8 Incut Foot 16 6 Incut Foot 2 Incut Foot 15 5 Sloper Foot 1 Sloper Foot 14 3 Incut Foot 13 2 Sloper Foot D / H 1 Incut Foot 12 3 Incut Foot 11 C / I 2 Sloper Foot 10 1 Incut Foot 5 Incut Foot 9 1 Incut Foot F 8 7 E / G 5 Incut Foot 2 Incut Foot 6 1 Sloper Foot 1 Incut Foot 5 4 KICKER 3 A Incut Foot A.5 Sloper Foot 2 B Sloper Foot B.5 Incut Foot 1 A B C D E F G H I J K C Incut Foot C.5 Sloper Foot D Sloper Foot D.5 Sloper Foot E Incut Foot E.5 Incut Foot F Sloper Foot F.5 Incut Foot G Incut Foot H Sloper Foot G.5 Sloper Foot I Incut Foot H.5 Sloper Foot J Sloper Foot I.5 Incut Foot K Incut Foot J.5 Sloper Foot 13 tension board installation guide
ALL SETS V
18 V 18 17 17
16 16 V V 15 15
14 14 V V 13 13 12 12
11 11 V
10 V 10 V 9 9 8 8 7 7 6 6
5 5 V V 4 4 3 3 2 2 1 1 A B C D E F G H I J K
14 tension board installation guide
ALL SETS
MAIN WALL A / K B / J C / I D / H 18 Finger Bucket (s) 18 Finger Bucket (xl) 18 30° Edge (l) 18 Jug Ball 17 Large Crimp (s) 17 30° Edge (s) 17 Round Edge (l) 17 Finger Bucket (m) 16 Finger Bucket (l) 16 4” Knob 16 Flat Edge (m) 16 Finger Bucket (l) 15 Jug Ball 15 Round Edge (m) 15 Finger Bucket (s) 15 Large Crimp (s) 14 5” Ball (mod. incut) 14 Finger Bucket (l) 14 Large Crimp (d) 14 Straight Pinch 13 Taper Pinch (m) incut 13 30° Edge (l) 13 Jug Ball 13 Finger Bucket (l) 12 Large Crimp (m) 12 30° Edge (s) 12 Taper Pinch (m) incut 12 Flat Edge (m) 11 Finger Bucket (m) 11 Brick Pinch (s) 11 30° Edge (s) 11 Finger Bucket (l) 10 Incut Foot 10 4” Knob 10 Jug Ball 10 Taper Pinch (m) incut 9 Taper Pinch (m) incut 9 Round Edge (m) 9 Large Crimp (s) 9 Finger Bucket (l) 8 Large Crimp (d) 8 Incut Foot 8 6” Sloper 8 30° Edge (s) 7 4” Knob 7 30° Edge (s) 7 Taper Pinch (m) incut 7 Large Crimp (m) 6 Incut Foot 6 Finger Bucket (l) 6 5” Ball (mod. incut) 6 Large Crimp (s) 5 Sloper Foot 5 30° Edge (s) 5 Incut Foot 5 30° Edge (m) 4 30° Edge (m) 4 Jug Ball 4 Large Crimp (m) 4 4” Knob 3 Incut Foot 3 Finger Bucket (xl) 3 Finger Bucket (s) 3 Incut Foot 2 Sloper Foot 2 Incut Foot 2 Large Crimp (s) 2 Sloper Foot 1 Incut Foot 1 Sloper Foot 1 Incut Foot 1 Incut Foot
E / G F KICKER 18 Brick Pinch (l) 18 4” Knob A Incut Foot A.5 Sloper Foot 17 Taper Pinch (m) incut 17 Round Edge (m) 16 30° Edge (m) 16 30° Edge (l) B Sloper Foot B.5 Incut Foot 15 Taper Pinch (m) incut 15 6” Sloper C Incut Foot 14 Large Crimp (m) 14 30° Edge (s) C.5 Sloper Foot D Sloper Foot 13 Finger Bucket (s) 13 4” Knob D.5 Sloper Foot 12 Large Crimp (d) 12 30° Edge (l) E Incut Foot 11 Finger Bucket (l) 11 Brick Pinch (s) E.5 Incut Foot F Sloper Foot 10 Finger Bucket (m) 10 Jug Ball F.5 Incut Foot 9 Straight Pinch 9 Flat Edge (s) G Incut Foot 8 Round Edge (m) 8 Large Crimp (d) G.5 Sloper Foot H Sloper Foot 7 Finger Bucket (l) 7 4” Knob H.5 Sloper Foot 6 30° Edge (s) 6 5” Ellipse I Incut Foot 5 Large Crimp (s) 5 Incut Foot J Sloper Foot I.5 Incut Foot 4 Finger Bucket (s) 4 Round Edge (m) 3 Finger Bucket (xl) 3 Finger Bucket (xl) K Incut Foot J.5 Sloper Foot 2 Large Crimp (m) 2 Incut Foot 1 Sloper Foot 1 Incut Foot 15 tension board installation guide
ALL SETS
SMALL HOLDS A.5 / J.5 B.5 / I.5 C.5 / H.5 D.5 / G.5
10.5 Shal. Pinch (n) 15.5 Shal. Pinch (w) 13.5 Shal. Pinch (e) 15.5 Shal. Pinch (e) 14.5 Small Crimp (cv) 9.5 Shal. Pinch (e) 14.5 Small Crimp (cv) 11.5 Round Edge (s) 13.5 Shal. Pinch (n) 6.5 Small Crimp (cv) 12.5 Small Crimp (cv) 8.5 Small Crimp (cc) 11.5 Shal. Pinch (n) 12.5 Small Crimp (cc) 4.5 Round Edge (s) 7.5 Round Edge (s) 11.5 Small Crimp (cv) 10.5 Shal . Pinch (e) 5.5 Shal. Pinch (n) 9.5 Small Crimp (cc) 8.5 Round Edge (s) 8.5 Shal. Pinch (w) 6.5 Small Crimp (cc) 4.5 Small Crimp (cc) 7.5 Small Crimp (cv) 4.5 Small Crimp (cc) 3.5 Round Edge (s) 3.5 Small Crimp (cv) 3.5 Shal. Pinch (w) E.5 / F.5
16.5 Small Crimp (cv) 15.5 Shal. Pinch (n) 13.5 Shal. Pinch (w) 12.5 Small Crimp (cv) 11.5 Shal. Pinch (w) 10.5 Shal. Pinch (n) 9.5 Small Crimp (cv) 8.5 Shal. Pinch (n) 7.5 Small Crimp (cc) 6.5 Shal. Pinch (w) 5.5 Small Crimp (cv) 4.5 Shal. Pinch (n) 3.5 Small Crimp (cv)
16 Tension Climbing Hardware List
Product Hardware Length (inches) Hardware Type # of Hardware Pieces Other 30 Degree Flat Edge (Large) 2 3/8" Socket Head Cap Bolt 1 Recommended set-screw 30 Degree Flat Edge (Medium) 2 3/8" Socket Head Cap Bolt 1 Recommended set-screw 30 Degree Flat Edge (Small) 2 3/8" Socket Head Cap Bolt 1 Recommended set-screw Finger Bucket (Extra Large) 3 3/8" Socket Head Cap Bolt 1 Recommended set-screw Finger Bucket (Large) 2.5 3/8" Socket Head Cap Bolt 1 Recommended set-screw Finger Bucket (Medium) 2.5 3/8" Socket Head Cap Bolt 1 Recommended set-screw Finger Bucket (Small) 2 3/8" Socket Head Cap Bolt 1 Recommended set-screw Large Crimp (Deep) 2 3/8" Button Head Bolt 1 Recommended set-screw Large Crimp (Moderate) 2 3/8" Button Head Bolt 1 Recommended set-screw Large Crimp (Shallow) 2 3/8" Button Head Bolt 1 Recommended set-screw Flat Edge (Large) 2 3/8" Socket Head Cap Bolt 1 Recommended set-screw Flat Edge (Medium) 2 3/8" Socket Head Cap Bolt 1 Recommended set-screw Flat Edge (Small) 2 3/8" Socket Head Cap Bolt 1 Recommended set-screw Round Edge (Large) 2 3/8" Socket Head Cap Bolt 1 Recommended set-screw Round Edge (Medium) 2 3/8" Button Head Bolt 1 Recommended set-screw Round Edge (Small) 2 3/8" Button Head Bolt 1 Recommended set-screw Straight Pinch 2 3/8" Socket Head Cap Bolt 1 Recommended set-screw Brick Pinch (Small) 3 3/8" Socket Head Cap Bolt 1 Recommended set-screw Taper Pinch Medium (Incut) 3 3/8" Socket Head Cap Bolt 1 Recommended set-screw Brick Pinch (Large) 3.5 3/8" Socket Head Cap Bolt 1 Recommended set-screw Shallow Pinch (Wide) 2 3/8" Button Head Bolt 1 Recommended set-screw Shallow Pinch (Narrow) 2 3/8" Button Head Bolt 1 Recommended set-screw Shallow Pinch (Egg) 2 3/8" Button Head Bolt 1 Recommended set-screw Small Crimp (Convex) 2 3/8" Button Head Bolt 1 Recommended set-screw Small Crimp (Concave) 2 3/8" Button Head Bolt 1 Recommended set-screw
Incut Foot 2 3/8" Button Head Bolt 1 Slopey Foot 2 3/8" Button Head Bolt 1
4" Diameter Knob 3 3/8" Socket Head Cap Bolt 1 Recommended set-screw 5" Diameter Incut Ball 3.5 3/8" Socket Head Cap Bolt 1 Recommended set-screw 5" Diameter Moderate Incut Ball 3.5 3/8" Socket Head Cap Bolt 1 Recommended set-screw 5" Diameter Jug Ball 3.5 3/8" Socket Head Cap Bolt 1 Recommended set-screw 6" Diameter Sloper Ball 3.5 3/8" Socket Head Cap Bolt 1 Recommended set-screw
Small Campus Rung 16" 2 Construction Grade Screw 4 Small Campus Rung 20" 2 Construction Grade Screw 4 Medium Campus Rung 16" 2 Construction Grade Screw 4 Medium Campus Rung 20" 2 Construction Grade Screw 4 Large Campus Rung 16" 2.5 Construction Grade Screw 4 Large Campus Rung 20" 2.5 Construction Grade Screw 4 Jug Rung 16" 3.5 Construction Grade Screw 6 Jug Rung 20" 3.5 Construction Grade Screw 6 Sloper Rung 16" 3.5 Construction Grade Screw 6 Sloper Rung 20" 3.5 Construction Grade Screw 6
Grindstone Mk2 - Construction Grade Screw - 2x 2" and 2x 3.5" Simple Board 5.5" (pair) - Construction Grade Screw - 4x 2.5" and 4x 3" Simple Board 22" - N/A - 2x 2.5" and 4x 3"