DOCSLIB.ORG

Books on Building, Repairing and Designs Repairing & Restoring

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Books on Building, Repairing and Designs Repairing & Restoring Books on Building, Repairing and Designs Repairing & Restoring gelcoat blisters and moisture protection. DVD-59 minutes (Item E31). Fibreglass Repair & Maintenance Detailed instructions on keel Final Fairing and damage, gel coat blisters, Finishing hardware bonding, finishing Explains the final building and installing teak. 84 pgs. and repairing process. (Item E13). Includes techniques for fairing, barrier coating and How to Fiberglass Boats finishing. 28pgs.(Item E16). Discusses and illustrates in detail all sheathing systems and techniques for NEW Restoring Your covering wooden hulls with fibreglass. Cedar Strip Boat- DVD by Pros and cons of various materials Don Husack covered. (Item E1e). Step-by-step instructions to restore a cedar strip Wooden Boat Restoration & Repair runabout, as well as An easy-to-follow guide for stripping off paint and varnish, removing doing almost any wooden and repairing and installing ribs, steam boat & canoe repair with bending, installing a transom, hull traditional methods using sanding, painting and varnishing and West System™. 80 pgs. final assembly. Epoxy (Item E14). techniques are also covered. (Item E1c). Gelcoat Blisters: Repair & Prevention An explanation of blistering, Painting & Varnishing laminate drying techniques, The keys to success is a well- repairing blister damage, conceived plan of action, correct epoxy barrier coat, and more. choice of tools and materials, careful 52 pgs (Item E15). surface preparation, proper coating application and a "feel" for what you are doing. (Item E43h). West System™ Technical Manual The Wood and Canvas Includes instructions on all Canoe by Stemlock & aspects of West System™ Thurlow epoxy usage and helpful tips History and guide to wood and on building techniques and canvas construction and repair. tools. (Item E30). Drawings, sketches and photos, plus fold-out plans for a 15' solo and a 17' West System™ How-To guide canoe DVD (Item E1). Detailed instructions and guide on handling epoxy, Restore Your Wooden advanced repair techniques, Boat: How To Do It by coating, bonding, fairing, Those Who’ve Done It and structural repairs on A must-read for anyone fibreglass cored and non-cored hulls, considering restoring a applying, repairing and preventing TenderCraft Boats and Supplies Page 13 www.tendercraftboats.com Call Toll-free to order 1-800-588-4682 Books on Building, Repairing and Designs wooden boat. Brings together instructive Building the Maine Guide stories and covers a wide array of boat Canoe by Stelmok types from daysailers to a large cabin A guide to building this cruiser (Item E1d). classic canoe. Included are The Complete Wooden many photos and clear, Runabout Restoration details on wood & canvas Guide by Danenberg construction. (Item E5). One of the world’s top runabout restoration Featherweight Boat authorities addresses every Building by McCarthy aspect of restoring 1920s Build the Wee Lassie One or through 1950s wooden powerboats (Item Two with step-by-step E1d2). instructions, pictures and diagrams. Add materials and London Goes to Sea: it’s all you need to build these Restoring an Old Boat on sleek and elegant a Budget by Baumgartner lightweight craft (Item E4). Precise records illustrate every step of a 4 year wooden Building the Sweet sailboat restoration (Item E51). Dream- an Ultralight Solo Canoe by Pettingill Planking & Fastening by Plans and instructions for a Spectre lightweight, solo canoe. Techniques for fastening Plywood constructed and intended for planking to ribs such as single or double paddle. Ideal for a clenching, riveting, caulking beginner (Item E22). and finishing (Item E43g). Build the Six Hour Building from Scratch Canoe by O’Brien Plans for a quick, simply Stripper's Guide to built canoe. Ideal for a Canoe Building by school or community project Hazen (Item E43c). Covers wood strip, epoxy and fibreglass construction The Kayak Shop by Kulczycki plus full-sized plans for Build a 16' or 18’ single or a 20' seven canoes and two touring double, plans/instructions kayaks (Item E2). (Item E10). Canoecraft by Moores Strip-Built Sea Kayak by and Mohr Schade With a few tools and Building three wood strip/epoxy beginner skills you can kayaks with easy to follow plans choose from 7 canoe styles and instructions for solo or and follow photographs and drawings tandem kayaks (Item E11). (Item E3). TenderCraft Boats and Supplies Page 14 www.tendercraftboats.com Call Toll-free to order 1-800-588-4682 Books on Building, Repairing and Designs Kayaks You Can Build: An Illustrated beginner. Video (Item E28) Kit Guide to Plywood (Item Cnpk). Construction by Moores and Rossel How to Build the Catspaw The masters team up to Dinghy A manual to build a teach techniques for version (carvel instead of constructing elegant lapstrake planking) of 12’ 8” Herreshoff wooden kayaks using plywood panels and Columbia Dinghy. (Item E43i) the stick-and-glue method (Item E21hc). Kayak Craft - Building Small Boats Fine Woodstrip Covers plank on frame and lap Construction by Moores strake boat building. Ideal for Designs for a 17' understanding these two Endeavour, 14' Sport, 16' methods (Item E43) 6" Touring and a 20' 6" Tandem plus details for cockpits, hatches How to Build A Wooden and decks (Item E21). Boat Everything you need to know to construct a carvel Ultralight Boatbuilding planked cruising boat. (Item by Hill Build a skiff or E41) canoe with photos and drawings. No lofting Clinker Plywood required and designs can be Boatbuilding Manual by adapted to any small-boat or Iain Oughtred Explains ultralight (Item E43a) glued clinker and lap strake plywood construction. Wood/Canvas Kayak Includes designs and detailed Building by George Putz plans. (Item E39) Guides the beginner through building a 17' or 18.5' Inuit How to Build Glued design sea kayak. Plans Lapstrake Wooden Boats included (Item E12) by John Brooks & Ruth Hill Construction technique Rip, Strip and Row by described here is durable and Brown, Pickett & low maintenance. (Item E35) Hartsock Full sized plans and instructions for a wood How to Build the 12’ 6” strip/epoxy 14' Cosine Haven by Maynard Bray A Wherry. The novice with keel and centreboard variation basic tools can build it in 175 hrs (Item of the Herreshoff 12 ½’.Each E6). See (Item Ccwk) for the Kit. step is explained and illustrated. (Item E43j) Building the Nutshell Pram by Maynard Bray How to Build the Shellback Easy to follow manual (Item Dinghy by Eric Dow E9) Using plywood and simple Build this 11' 2" dinghy with tools. A perfect project for the step-by-step instructions. This TenderCraft Boats and Supplies Page 15 www.tendercraftboats.com Call Toll-free to order 1-800-588-4682 Books on Building, Repairing and Designs modern classic rows, tows, and sails boat designs ranging from 6 ft. to 45 ft. beautifully. (Item E43d) Construction methods range from plank on frame to plywood and also a variety of How to Build the glue techniques Gloucester Light Dory by (Item Epg). Harold Payson A manual to build a rowing GLEN-L Book of Boat dory that is fast, seaworthy Designs 240 designs for and a delight to row using boats ranging from 6' to 55' simple plywood construction. (Item E43e) plus kayaks, runabouts and skiffs in plywood, stitch-n- How to Build the Ocean glue, strip, cold moulded and Pointer by Stimson Step by fibreglass construction. (Item E8) step building of a 19' 6" Outboard Skiff, based on a Thirty Wooden Boats round-bilged skiff known as the Designs for power boats, West Pointer. Rated from 25-75 daysailers, cruisers, canoes, hp kayaks, and pulling boats plus (Item E43f) how to read boat plans. (Item Ea) New Plywood Boats by Jones Forty Wooden Boats A detailed description for Designs for kayaks of various plywood built row & paddle- materials, canoes, peapods, boats to multi-hulls. (Item E52) catamarans, daysailers, rowing shells and skiffs (Item Eb) Building the Weekend Skiff by Butz Fifty Wooden Boats Four sheets of plywood and a From prams to schooners, weekend combine to make a drawings identifying parts of a skiff for sail, row, or power. wooden boat, a guide to (Item E43cs) selecting wood, and reading boat plans. (Item Ec) Designs Lofting by Allan Vaitse Leads you through lofting (drawing lines of a boat to Designs to Inspire: full-size) to getting shapes Selections from the Rudder and patterns for (1897 to 1942) by Anne and building.(Item E38) Maynard Bray Power and sail craft designs Small Craft Plans by hidden away in old issues of The Rudder Benford Design Group 15 magazine including line Plans ready to loft to full drawing and captions. (Item size with boats ranging from E33) 7-18’ (Item E23) Paul Gartside Plans Includes plans for four dozen TenderCraft Boats and Supplies Page 16 www.tendercraftboats.com Call Toll-free to order 1-800-588-4682 Books on Building, Repairing and Designs Others Inuit umiaks affected the history of North America. (Item E48). Story of the Chestnut Canoe by Ken Solway Expectant Father's The Chestnut Canoe Cradle Boat by Company began in 1897 Spectre & Smith and was significant in A guide for anyone the development of the wanting to create a canoe. Photos and unique experience for a images from historical new baby by building a boat cradle (Item catalogues illustrate this E4). Maritime story. (Item E27) When the Chestnut was in Confessions of a Boat Flower builder: J.Rosborough This work by Roger Reveals trials and MacGregor traces the history triumphs of designing, of the famous Chestnut canvas building, outfitting, and canoe. Includes photographs operating vessels and the and company papers as well as notes from character of the builder travellers, the sporting press, and canoe who grasped one of the last windows of builders. (Item E27a). opportunity before the decline of the wooden boat-building industry (Item Canoe Paddles: A Guide E26).
Load more

Recommended publications
  • Wooden Boat Building
    WOODEN BOAT BUILDING Since 1978, students in the Wooden Boat Building Program at The Landing School have learned to create boats from scratch, producing functional art from plans created by professional yacht designers. As a program graduate, you will perfect skills that range from woodworking and composite fabrication to installing the latest marine systems – equipping you to start your own shop, build your own boat, crew a ship or become a master artisan. Study subjects include: How You’ll Learn Joinery & Refitting Your classwork will combine formal lectures and field trips with hands-on Modern Boat Building projects. Students are assigned to boat-specific teams, working together Techniques: Cold Molding Rigging under highly experienced instructors to learn quality and efficiency in every step of boat construction: lofting, setup, planking, fairing, joinery, spars, Professional Shop Practices rigging, finish work and, ultimately, sea trials. Proper Training in Boat projects are selected not only to match the interests of each team, but Modern & Traditional Tools to teach skills currently in demand within the marine industry. Typical builds include mid-sized boats such as the Flyfisher 22 powerboat, or a sailboat Traditional Boat Building such as the Haven 12½. To round out your skills, you may also construct Techniques: elements of smaller boats, such as a Peapod or Catspaw. Lapstrake Planking Visit us online at landingschool.edu Earning Your Diploma or Degree Additional occupations include: To earn a diploma in the Wooden Boat Building Program, you must attend The Landing School full time for two semesters (about eight months) and Boat Crewing meet all graduation criteria.
    [Show full text]
  • Period Homes Magazine – Frame of Reference
    One of these drivers is the choice of One way to control costs is to design a wood species. Choosing oak over mahog- hybrid frame that utilizes timber fram- any would dramatically reduce materials ing in the highly visibility areas and uses costs but may not achieve the desired look. stick framing or SIPS construction in the During the design process the team should remainder of the spaces. Often timber- review the characteristics of various species framed great rooms and front porches and tour several timber frames before se- are clad with and then married to SIPS lecting the species. construction. As discussed above, SIPS Another cost driver is the quality of provide structural support. Additionally, the wood, whether green (freshly felled), because of their design, they can be used kiln dried or reclaimed. Each of these can as structural building members, so whole markedly affect the price of the frame, with buildings can be constructed of SIPS. green wood typically the least expensive Another hybrid technique is to include and reclaimed wood the most expensive. A trusses in the design that are supported rule of thumb is that the drier the wood, by SIPS or stick-framed walls. It should the more stable, hence less checking and be recognized though that trusses can be tighter joints over time. These issues rarely structural or decorative, but the cost for have a structural impact on the frame and each will be about the same so they might are usually aesthetic choices. Requiring as well earn their keep. certified woods (Forest Stewardship Coun- In conclusion, timber framing is not only cil certified) sometimes affects price and one of the oldest construction techniques availability of certain species and should known to man, it is also among the most be reviewed during the design process.
    [Show full text]
  • Boatbuilding Materials for Small-Scale Fisheries in India
    BAY OF BENGAL PROGRAMME BOBP/WP/9 Development of Small-Scale Fisheries (G CP/RAS/040/SWE) BOATBUILDING MATERIALS FOR BOBP/WP/9 SMALL-SCALE FISHERIES IN INDIA Executing Agency: Funding Agency: Food and Agriculture Organisation Swedish International of the United Nations Development Authority Development of Small-Scale Fisheries in the Bay of Bengal Madras, India, October 1980 PREFACE This paper summaries a study on the availability and prices of materials used to construct the hulls of fishing craft for the important small-scale fisheries of the East Coast of India. The paper should be of interest to development planners, legislators and administrators. Builders of fishing craft, suppliers of materials, and owners and prospective owners of fishing craft may also find useful the information on trends in prices and availability of boatbuilding materials and the possibilities of alternative materials. The study covered the following boatbuilding materials: timber for kattumarams and boats; fibre-reinforced plastics; ferrocement; steel; and aluminium, which is used forsheathing wooden hulls and is also a construction material in its own right. The study was carried out by Matsyasagar Consultancy Services Private Limited under contract to the Programme for the Development of Small-Scale Fisheries in the Bay of Bengal, GCP/ RAS/040/SWE (usually abbreviated to the Bay of Bengal Programme). The Programme is executed by the Food and Agriculture Organisation of the United Nations (FAO) and funded by the Swedish International Development Authority (SIDA). The main aims of the Bay of Bengal Programme are to develop and demonstrate technologies by which the conditions of small-scale fishermen and the supply of fish from the small-scale sector may be improved, in five of the countries bordering the Bay of Bengal — Bangladesh, India, Malaysia, Sri Lanka and Thailand.
    [Show full text]
  • Inspection of Wooden Vessels
    Guidance on Inspection, Repair, and Maintenance of Wooden Hulls ENCLOSURE (1) TO NVIC 7-95 COMPILED BY THE JOINT INDUSTRY/COAST GUARD WOODEN BOAT INSPECTION WORKING GROUP August 1995 TABLE OF CONTENTS ACKNOWLEDGEMENTS A-1 LIST OF FIGURES F-1 GLOSSARY G-1 CHAPTER 1. DESIGN CONSIDERATIONS A. Introduction 1-1 B. Acceptable Classification Society Rules 1-1 C. Good Marine Practice 1-1 CHAPTER 2. PLAN SUBMITTAL GUIDE A. Introduction 2-1 B. Plan Review 2-1 C. Other Classification Society Rules and Standards 2-1 D. The Five Year Rule 2-1 CHAPTER 3. MATERIALS A. Shipbuilding Wood 3-1 B. Bending Woods 3-1 C. Plywood. 3-2 D. Wood Defects 3-3 E. Mechanical Fastenings; Materials 3-3 F. Screw Fastenings 3-4 G. Nail Fastenings 3-5 H. Boat Spikes and Drift Bolts 3-6 I. Bolting Groups 3-7 J. Adhesives 3-7 K. Wood Preservatives 3-8 CHAPTER 4. GUIDE TO INSPECTION A. General 4-1 B. What to Look For 4-1 C. Structural Problems 4-1 D. Condition of Vessel for Inspection 4-1 E. Visual Inspection 4-2 F. Inspection for Decay and Wood Borers 4-2 G. Corrosion & Cathodic Protection 4-6 H. Bonding Systems 4-10 I. Painting Galvanic Cells 4-11 J. Crevice Corrosion 4-12 K. Inspection of Fastenings 4-12 L. Inspection of Caulking 4-13 M. Inspection of Fittings 4-14 N. Hull Damage 4-15 O. Deficiencies 4-15 CHAPTER 5. REPAIRS A. General 5-1 B. Planking Repair and Notes on Joints in Fore and 5-1 Aft Planking C.
    [Show full text]
  • Styrene Exposures During Fiber Reinforced Plastic Boat Manufacturing
    This Survey Report and any recommendations made herein are for the specific facility evaluated and may not be universally applicable. Any recommendations made are not to be considered as final statements of NIOSH policy or of any agency or individual involved. Additional NIOSH Survey Reports are available at http://www.cdc.gov/niosh/surveyreports. IN-DEPTH SURVEY REPORT: STYRENE EXPOSURES DURING FIBER REINFORCED PLASTIC BOAT MANUFACTURING at U.S. MARINE INCORPORATED Arlington, Washington REPORT WRITTEN BY: Rebecca V. Carlo Duane Hammond, P.E. H. Amy Feng, M.S. REPORT DATE: June 2007 REPORT NO: EPHB 306-17a U.S. DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Division of Applied Research and Technology Engineering and Physical Hazards Branch 4676 Columbia Parkway, Mail Stop R-5 Cincinnati, Ohio 45226-1998 SITE SURVEYED: U.S. Marine, Inc. Arlington, Washington SIC CODE: 3732 (Boat Manufacturing And Repair) NAICS CODE: 336612 (Boat Building) SURVEY DATE: August 28-31, 2006 SURVEY CONDUCTED BY: Rebecca V. Carlo Ron Hall Duane Hammond Adam Paberzs Alberto Garcia Dan Farwick Srinivas Durgam All mentioned above: NIOSH, Cincinnati, OH EMPLOYER REPRESENTATIVES Dennis Pearson CONTACTED: Safety/ Environmental Manager U.S. Marine 2 DISCLAIMER Mention of company names or products does not constitute endorsement by the Centers for Disease Control and Prevention. The findings and conclusions in this report are those of the authors and do not necessarily represent the views of the National Institute for Occupational Safety and Health. 3 ACKNOWLEDGEMENT The authors of this report thank the National Marine Manufacturers Association (NMMA) and the U.S.
    [Show full text]
  • Durakore Planks
    DuraKore® composite strip planks • Lightweight • Extemely high strength-to-weight ratio • High impact and fatigue resistance • Superior sound and thermal insulation properties • High moisture resistance DuraKore® Strip Composite Technique represents a technological break- • Positive flotation through that simplifies the process of • Excellent cost effectiveness building a custom, one-off composite • Renewable natural resource boat for the amateur builder and professional builder alike. The DuraKore Building System combines the best DuraKore strip planks consist of an end-grain balsa core elements of traditional wooden boat building techniques sandwiched between timber veneers. Planks are supplied with advanced, lightweight, composite materials. as 300mm x 2400mm sheets and are pre-scarfed to Builders can construct a stronger, lighter ‘composite’ facilitate joining. boat faster and easier than with traditional wood Planks are manufactured in a controlled environment construction techniques. For example, DuraKore weighs and under-go strict Quality Inspections, at all stages up to 67 per cent less than an equal thickness of Western during the manufacturing process, to ensure dimensional Red Cedar, yet is actually stronger. stability and consistent thickness. The amateur builder will find that DuraKore is easy to handle and does not require the use of complicated tooling or moulds. Construction proceeds in small, logical steps. The professional builder will find that DuraKore allows construction of a very competitive boat in terms of strength-to-weight, stiffness-to-weight, and durability, at a cost significantly less than other forms of one-off construction. DuraKore is also ideal for building running plugs and prototypes, allowing production builders the opportunity to recoup a good deal of new-model tooling costs.
    [Show full text]
  • Plan # 306 Is the Bass Boat Version of Our GP21 Boat Series (General Purpose Boat 21')
    Specifications: LOA: 21' 6.4 m Max. Beam: 8' 2.44 m Hull draft (2000 lb): 8" 0.2 m Displacement at DWL: 3500 lb 1587 Liters PPI at DWL: 578 lbs 102 kg/cm Fuel: 50 Gallons 200 liters Recommended engine 90-150 HP 65-115 KW Material: Epoxy-fiberglass-plywood composite Plan # 306 is the Bass Boat version of our GP21 boat series (General Purpose boat 21'). The GP21 has the ideal hull shape for a Bass Boat. The GP21 is a wide garvey hull with good planing characteristics, stable, roomy and smooth running in a moderate chop. The hull is based on a proven work boat shape. There are several companies producing variations on that type of hull, mostly in aluminum. This hull shape is a good compromise between comfort and performance. The wide hull is stable and has plenty of usable deck area but the deadrise, in particular at the bow, is deep enough to run smoothly in a chop. The vee at the transom is only 3 degrees but a sharp 26 degrees at the cutwater. Also, at the chine, the bow becomes much narrower, almost like a standard vee hull but the side panel flares open to a wide deck. Estimated hull weight (with all components but empty tank and medium size motor) varies greatly with layout and features but will average 1,400 lbs. Speed estimates for a displacement of 3,000 lbs and 90 HP give a top speed of 26 mph. Same boat with 150 HP: 34 mph. At 2,000 lbs (light) and 90 HP: 32 mph and up to 41 mph with a 150.
    [Show full text]
  • Shipbuilding Catching Shellfish
    IntroductionIntroduction Much of the East Riding of Yorkshire adjoins water: the North Sea and the River Humber and its tributaries. Over the centuries men have needed boats to travel over the water and to gather food from under it. Naturally people with the right skills set up to build these boats. Some ship building operations are quite well known, such as those in Beverley and Hull. They have been documented in exhibitions in other local museums. This exhibition looks at some less well known boat building yards and boat builders both on the east coast and along the banks of the Humber. It has been researched and produced by the Skidby Windmill Volunteer Team. Prehistory- the Ferriby boats The Yorkshire Wolds have been home to people since Neolithic times and the River Humber has been an important transport route allowing goods and people to travel in all directions by water. For thousands of years this was the easiest and safest way to travel. It is therefore not surprising that North Ferriby was the site of one of the oldest boatyards in Europe as well as being an important harbour. Above: hypothetical reconstruction of a Ferriby boat. Right: Excavation in 1963 In 1937 changes to the tidal currents exposed three large oak planks preserved in the mud which Ted and Willy Wright recognised as belonging to very early boats. At first these were thought to be Viking but later tests confirmed that they were Bronze Age and, at 4000 years A half-scale replica of the Ferriby boats called Oakleaf has been built and sea trials proved old they are some of the oldest boats discovered in Europe.
    [Show full text]
  • The Charlotte Sawdust February 1999
    THE CHARLOTTE SAWDUST FEBRUARY 1999 February’s Meeting “Claw & Ball Carving” by Robert Reading February’s meeting topic will be a presentation on Claw & Ball Carving by John McAlister. Mr. McAlister had recently made a reproduction of a Goddard-Townsend secretary, for which Fine Woodworking Magazine honored him with the back cover. He was featured in the April 1998 issue (no. 129). John's work is also featured in our gallery of members’ work. New members should take a look at what is in the gallery. Members’ Gallery by Dave Lewis The Charlotte Woodworkers Association maintains a Members’ Gallery where you can show off your projects. It’s on display at every meeting, and at special functions in which the Association participates. To have your projects shown in the Gallery, it’s a simple matter of providing Dave Lewis with a good quality photo (color preferred) and a brief description of the project. It’s been a while since we’ve gotten recent photos. Many of you must have had Christmas projects to do. Let's have a copy of your latest effort to share with others. Since the Charlotte Woodworkers Association is now on-line (www.charlottewoodworkers.org), we'll also need more photos for the Web Site. Call Dave Lewis (541-0411) if you need help with the photography. Scanning is available to get your photos on-line, too. After all, there’s nothing quite like having a worldwide audience for your work! Last Month’s Meeting “Veneering” by David Waters We would like to thank Jack Coobs for January’s presentation on veneering.
    [Show full text]
  • Investigating the Vulnerabilities of Structures to Ignition from a Firebrand Attack
    Investigating the Vulnerabilities of Structures to Ignition From a Firebrand Attack SAMUEL L. MANZELLO1, JOHN R. SHIELDS1, YOSHIHIKO HAYASHI2, and DAISAKU NII2 1Building and Fire Research Laboratory (BFRL) National Institute of Standards and Technology (NIST) 100 Bureau Drive, Gaithersburg, MD 20899-8662 USA 2Department of Fire Engineering Building Research Institute (BRI) 1 Tachihara, Tsukuba, Ibaraki, 305-802 Japan ABSTRACT A unique experimental apparatus, known as the Firebrand Generator, was used to generate a controlled and repeatable size and mass distribution of glowing firebrands. The size and mass distribution of firebrands produced from the generator was selected to be representative of firebrands produced from burning vegetation. The vulnerability of roofing materials to firebrand attack was ascertained using fluxes of firebrands produced using this device. The experiments were performed at the Fire Research Wind Tunnel Facility (FRWTF) at the Building Research Institute (BRI) in Tsukuba, Japan. A custom mounting assembly was constructed to support full scale sections of common roofing materials inside the FRWTF. The sections constructed for testing included full roofing assemblies (base layer, tar paper, and shingles) as well as only the base layer material, such as oriented strand board (OSB). The custom mounting assembly allowed for the construction of flat roofs as well as the construction of angled roofs (valleys). Results of this study are presented and discussed. KEYWORDS: wildland-urban interface (WUI) fires, ignition, firebrands, roofing INTRODUCTION The Wildland-Urban Interface (WUI) is defined as a location where structures meet or intermingle with undeveloped wildland. In 2003, WUI fires in the vicinity of San Diego, California displaced nearly 100,000 people and destroyed over 3000 homes, leading to over $2B in insured losses [1].
    [Show full text]
  • Facts About Plywood and Lvl
    FACTS ABOUT PLYWOOD AND LVL Understanding the characteristics of Plywood and LVL, and how these products are used. Table of Contents The Benefits of Using EWPAA-JAS-ANZ Product Certified Plywood and LVL ... 4 Plywood and LVL Standards ......................................................................... 4 Plywood Dimensions & Specification ........................................................... 5 Plywood Panels – Standard Dimensions ..................................................................................... 5 Specifying Plywood ..................................................................................................................... 5 Gluelines ..................................................................................................... 5 Veneer Quality ............................................................................................ 6 Structural Plywood ...................................................................................... 7 Concrete Formwork Plywood ....................................................................... 8 Marine Plywood .......................................................................................... 9 Laminated Veneer Lumber - LVL ................................................................... 9 Exterior and Interior Plywood .................................................................... 11 Overlaid and Composite Plywood Panels ................................................... 12 Characteristics of Engineered Wood Products ...........................................
    [Show full text]
  • Master Recommended Reading List
    MASTER RECOMMENDED READING LIST Grade Book Title Author Genre Level A Science Fair – Series 2, Book 15 Spalding Fiction 1 Abe Lincoln Grows Up Sandberg, Carl Biography 6 7 Abraham Lincoln Schott, J. Biography 3 4 Abraham Lincoln--"In Their Own Words" - Series Sullivan, George Biography 4 5 6 Abraham Lincoln: The Great Emancipator Stevenson, Augusta Biography 3 4 5 Abraham Lincoln's World Foster, Genevieve Biography 5 6 Across Five April (BR) Hunt, Irene Historical Fiction 4 5 6 Adam of the Road (BR) Gray, Elizabeth Historical Fiction 4 5 6 Adolph Hitler Wepman, D. Biography 7 8 Adventures of Hotsy Totsy, The Cussler, Clive Fantasy 2 3 Adventures of Huckleberry Finn, The (BR) Twain, Mark Adventure 5 6 7 Adventures Of Sherlock Holmes Doyle, Sir Arthur Conan Mystery 7 8 Adventures of the Bailey School Kids - (Entire Series) Dadey, Debbie Mystery 3 4 Adventures of Tom Sawyer, The Twain, Mark Adventure 5 6 Adventures of Vin Fiz, The Cussler, Clive Fantasy 2 3 Aku Aku: The Secret of Easter Island Heyerdahl, Thor Adventure 7 8 Albert Einstein: Young Thinker Hammontree, Marie Biography 3 4 5 Albert Schweitzer, Genius in the Jungle Gollomb, Joseph Biography 4 Aldo Applesauce Hurwitz, Johanna Fiction 3 4 5 Alexander and the Terrible Horrible No Good Very Bad Day Viorst, Judith Fiction 1 Alexander Graham Bell: Inventor of the Telephone Davidson, Margaret Biography 3 4 Alexander: The Boy Soldier (BR) Adams, Simon Biography 5 6 7 Alice's Adventures in Wonderland (BR) Carroll, Lewis Fiction 5 6 7 All Aboard Reading - (Entire Series) various Fiction
    [Show full text]