HI 3030 Multi-Scale Weight Controller

Applications PROCESS WEIGHING • Batching/Blending • Filling/Dispensing • Level-by-Weight • Check Weighing • Weight Monitoring

Features The Hardy HI 3030 is a flexible weight THE STAND-ALONE SOLUTION controller that can monitor and control up Let’s again take the example of the eight storage The Hardy to four scales simultaneously. It can act as a tanks, but this time you wish to control tank Process Toolbox front end to a PLC, PC or DCS system for weights outside of the PLC. No problem! With or applications such as level, batching, filling, without a connection to the PLC, you can set up The Hardy Process Toolbox is a set of dispensing, and check weighing, or as a the HI 3030 to automatically refill each of the productivity tools that support process stand alone for simple control or weight storage vessels when they get to their individual weighing functions. monitoring. “low” levels. Now you can also save on Each tool saves time, programming costs. NETWORKING increases accuracy, PRODUCTIVITY improves efficiency As a bridge to a PLC, its four scales can share COMPLETE FLEXIBILITY one network connection, whether it is With the flexible I/O mapping and twelve or reduces risk in DeviceNet, ControlNet, EtherNet/IP, or independent internal setpoints in the HI 3030, process weighing Analog. You can also link additional HI 3030s you can direct alarms or enunciators to a local PROCESS TOOLBOX applications. TM with their multiple scales and share the same output or to any point on the plant network.You IT network connection. Just like the other Series can even have an alarm emailed directly to you! 3000 products, you can also configure or Don’t need a display or keypad on the controller? ® WAVERSAVER monitor the HI 3030 using a web browser or Use the Blind Remote HI 3030R, and control or • Ignores vibration on and around scales network interface. configure the unit via your web browser or your local network. C2® and eCALTM THE PLC SOLUTION Imagine you have eight storage tanks and INTEGRATED TECHNICIAN® Electronic Calibration would like to monitor and control the weight in The HI 3030's INTEGRATED TECHNICIAN, • Electronic calibration without test each of the tanks using your PLC. You could used in conjunction with an IT Junction Box, weights buy two HI 3030s, each with four scale inputs provides built-in system diagnostics that enable and tie them together with the built-in Ethernet you to troubleshoot and diagnose your tm communications. Bring all eights scales back to weighing system right from its front panel or a your PLC using just one of the HI 3030s and web browser. You can read individual load ® one of its optional technologies:DeviceNet, sensor voltages and weights, make INTEGRATED TECHNICIAN ControlNet, Profibus, or EtherNet/IP network comparisons, and isolate individual system • Weighing system monitoring and card. If you are in need of more than eight components for quick and easy troubleshooting storage tanks, you can connect up to 16 troubleshooting. ® controllers, for a total of 64 scales, through INTEGRATED that same single interface.You save wiring, IT TECHNICIAN time, and money.

www.hardysolutions.com • 800-821-5831 COMPONENTS SPECIFICATIONS TO COMPLETE Display Load Point Excitation YOUR HARDY • 4 line x 20 character backlit LCD • 5VDC power drives up to 16 350-ohm load cells SYSTEM • 5 x 7 dot matrix Power Requirement Update Rate • 108-264VAC, 47-63Hz or 12-24 VDC Hardy Bench Scales, Floor • 55 times per second • 25 watts max Scales and Load Points Averaging Operating Temperature Hardy carries a wide variety of strain • Sliding up to 250 readings in single unit increments • -10° to +50°C (14° to 122°F) Storage Temperature gauge load points and scale bases Resolution • Display: 1:985,000 (3mV/V load cells) • -20° to +70°C (-4° to 158°F) to accommodate your application • Internal: 1:1,048,000 Enclosure requirements. Standard Interfaces • Panel mount • Ethernet: 10/100base T; embedded web server • Swivel mount Dimensions ADVANTAGE Series • Serial RS 232: simplex to printer • Panel mount: 6.03" (153mm) with rear cap Load Point with Stable Weight Reading C2 Calibration • Panel cutout: 8.94" W x 6.63" H (227mm W x 169mm H) • WAVERSAVER® 0.25Hz minimum Approvals Calibration Techniques • CE, UL/CUL, NTEP, Canada Weights & Measures • C2® electronic calibration ANY-WEIGH Warranty • Traditional calibration with test weights • Two-year warranty against defects in workmanship Scales Instrument Local I/O • Five mappable inputs optically isolated All specifications subject to change without notice. Please contact the • Four or seven mappable outputs 48-240VAC Form A Hardy factory or visit our website for the latest specifications. • Third party mappable

Weighing Instruments NETWORK CONFIGURATIONS Dedicated to Your Applications Controllers, Weigh Modules, Transmitters MODELS Allen-Bradley® Compatible HI 3030 Plug-in Weigh Scale Modules HI 3030R Blind Remote -LC Single scale -JB Single scale with built-in junction box -2S Dual scale -4C Four scale

HARDY CONTROL-LINK NETWORK OPTIONS - Built-in junction box - Profibus HI 3000 Series - Enviromental rear cap - ControlNet HI 4050 Controllers - Swivel mount bracket - DeviceNet master and HI 6000 Series - DC power scanner/slave - DC relay outputs - TCP - Multiple analog out - EtherNet/IP

9440 Carroll Park Dr. San Diego, CA 92121 S T M tel. +1-858-278-2900 O A tel. 800-821-5831 C K K E fax +1-858-278-6700 www.hardysolutions.com [email protected]

P S A H C I All information within is subject to change without notice. Visit our website for latest specifica- K P tions. WAVERSAVER, C2, IT, ADVANTAGE and ANY-WEIGH are registered trademarks of Hardy Since 1993 Process Solutions, Inc.. Allen-Bradley and Encompass are trademarks of Rockwell Automation, Inc. All other trademarks or registered trademarks are the property of their respective owners. HI 3030 0400-0007A www.hardysolutions.com • 800.821.5831