DOCSLIB.ORG

Zscaler and Cisco SD-WAN (Viptela) Deployment Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Zscaler and Cisco SD-WAN (Viptela) Deployment Guide Zscaler Internet Access (ZIA) and Cisco SD-WAN Deployment Guide July 2020 Version 3.2 Table of Contents 1 Document Overview ..................................................................................... 6 1.1 Document Audience ...................................................................................................... 6 1.2 Hardware Used .............................................................................................................. 6 1.3 Software Revisions ........................................................................................................ 6 1.4 Request for Comments .................................................................................................. 6 1.5 Document Prerequisites ................................................................................................ 7 1.6 Document Revision Control ........................................................................................... 8 1.7 Cisco Design Overview .................................................................................................. 9 1.7.1 GRE and IPsec Tunnels ................................................................................................... 10 1.7.2 Tunnel Liveliness .............................................................................................................. 10 1.7.3 Transport-side vs Service-side Tunnels ............................................................................ 12 1.7.4 Traffic Redirection ............................................................................................................ 12 1.7.5 Cisco SD-WAN Configuration Requirements .................................................................... 14 1.8 Lab Topology and Configuration Overview .................................................................. 18 2 Configuring Zscaler Internet Access (ZIA) ............................................... 20 2.1 Overview ...................................................................................................................... 20 2.2 Logging into ZIA ........................................................................................................... 22 2.3 Configuring ZIA for GRE Tunnel .................................................................................. 23 2.3.1 Provision GRE Tunnel ...................................................................................................... 23 2.3.2 Navigate to Locations ....................................................................................................... 23 2.3.3 Add a Location ................................................................................................................. 24 2.3.4 Enter Location Data .......................................................................................................... 25 2.3.5 Verify Location Information and Save ............................................................................... 26 2.3.6 Confirm Changes Have Been Submitted .......................................................................... 27 2.3.7 Activate Changes ............................................................................................................. 28 2.4 Configuring ZIA for Ipsec Tunnel ................................................................................. 29 2.4.1 Navigate to VPN Credentials ............................................................................................ 29 2.4.2 Add a VPN Credential ...................................................................................................... 30 2.4.3 Enter VPN Credential Data ............................................................................................... 31 2.4.4 Verify VPN Credential ....................................................................................................... 32 2.4.5 Navigate to Locations ....................................................................................................... 33 2.4.6 Add a Location ................................................................................................................. 34 2.4.7 Enter Location Data .......................................................................................................... 35 2.4.8 Add VPN Credential to Location and Save ....................................................................... 36 2.4.9 Confirm Changes Have Been Saved ................................................................................ 37 2.5 Activate Pending Changes .......................................................................................... 38 2.5.1 Activate Changes ............................................................................................................. 38 2.5.2 Activation Confirmation ..................................................................................................... 39 3 Configuring Cisco SD-WAN ....................................................................... 40 3.1 Log into Cisco SD-WAN vManage ............................................................................... 40 3.2 Configure GRE Tunnel (transport-side tunnel) ............................................................ 41 3.2.1 Feature and Device Template Modifications ..................................................................... 41 3.2.2 Add Feature Template for the Primary GRE Tunnel ......................................................... 44 3.2.3 Select VPN Interface GRE Feature Template ................................................................... 45 Page 2 of 160 3.2.4 Set GRE Basic Configuration and Source Interface .......................................................... 45 3.2.5 Set GRE Interface Destination .......................................................................................... 46 3.2.6 Enable GRE Keepalives ................................................................................................... 48 3.2.7 Create Feature Template for the Secondary GRE Tunnel ................................................ 49 3.2.8 Add GRE Interface Feature Template to Device Template ............................................... 51 3.2.9 VPN 0 Template ............................................................................................................... 52 3.2.10 Configuration Update .................................................................................................... 53 3.2.11 Add GRE Route............................................................................................................. 55 3.2.12 Configuration Update .................................................................................................... 55 3.2.13 Verify Tunnel Operation ................................................................................................. 58 3.3 Configuring Ipsec Tunnel (Transport-side and Service-side) ....................................... 60 3.3.1 Feature and Device Template Modifications ..................................................................... 60 3.3.2 Add Feature Template for the Primary Ipsec Tunnel ......................................................... 63 3.3.3 Select VPN Interface Ipsec Feature Template .................................................................. 64 3.3.4 Set Ipsec Basic Configuration and Source and Destination Interface................................ 64 3.3.5 Configure IKE Parameters ................................................................................................ 66 3.3.6 Configure Ipsec Cipher-suite ............................................................................................ 67 3.3.7 Create Feature Template for the Secondary Ipsec Tunnel ................................................ 68 3.3.8 Add Ipsec Interface Feature Template to Device Template .............................................. 70 3.3.9 VPN 0 or VPN 1 Template ................................................................................................ 71 3.3.10 Configuration Update .................................................................................................... 72 3.3.11 Add Service Routes ....................................................................................................... 74 3.3.12 Configuration Update .................................................................................................... 78 3.3.13 IOS XE SD-WAN Ipsec Tunnel Workarounds ................................................................ 80 3.3.14 Verify Tunnel Operation ................................................................................................. 83 3.4 Configuring Layer 7 Health Checks ............................................................................. 84 3.4.1 Feature and Device Template Modifications ..................................................................... 85 3.4.2 Add System Template with Tracker .................................................................................. 86 3.4.3 Add IPSEC Tunnel Interface with a Tracker ...................................................................... 87 3.4.4 Add New Feature Templates to the Device Templates ..................................................... 88 4 Verifying Service Configuration ................................................................ 89 4.1 Request Verification Page ........................................................................................... 89 5 Requesting
Load more

Recommended publications
  • User Datagram Protocol - Wikipedia, the Free Encyclopedia Página 1 De 6
    User Datagram Protocol - Wikipedia, the free encyclopedia Página 1 de 6 User Datagram Protocol From Wikipedia, the free encyclopedia The five-layer TCP/IP model User Datagram Protocol (UDP) is one of the core 5. Application layer protocols of the Internet protocol suite. Using UDP, programs on networked computers can send short DHCP · DNS · FTP · Gopher · HTTP · messages sometimes known as datagrams (using IMAP4 · IRC · NNTP · XMPP · POP3 · Datagram Sockets) to one another. UDP is sometimes SIP · SMTP · SNMP · SSH · TELNET · called the Universal Datagram Protocol. RPC · RTCP · RTSP · TLS · SDP · UDP does not guarantee reliability or ordering in the SOAP · GTP · STUN · NTP · (more) way that TCP does. Datagrams may arrive out of order, 4. Transport layer appear duplicated, or go missing without notice. TCP · UDP · DCCP · SCTP · RTP · Avoiding the overhead of checking whether every RSVP · IGMP · (more) packet actually arrived makes UDP faster and more 3. Network/Internet layer efficient, at least for applications that do not need IP (IPv4 · IPv6) · OSPF · IS-IS · BGP · guaranteed delivery. Time-sensitive applications often IPsec · ARP · RARP · RIP · ICMP · use UDP because dropped packets are preferable to ICMPv6 · (more) delayed packets. UDP's stateless nature is also useful 2. Data link layer for servers that answer small queries from huge 802.11 · 802.16 · Wi-Fi · WiMAX · numbers of clients. Unlike TCP, UDP supports packet ATM · DTM · Token ring · Ethernet · broadcast (sending to all on local network) and FDDI · Frame Relay · GPRS · EVDO · multicasting (send to all subscribers). HSPA · HDLC · PPP · PPTP · L2TP · ISDN · (more) Common network applications that use UDP include 1.
    [Show full text]
  • Routing Loop Attacks Using Ipv6 Tunnels
    Routing Loop Attacks using IPv6 Tunnels Gabi Nakibly Michael Arov National EW Research & Simulation Center Rafael – Advanced Defense Systems Haifa, Israel {gabin,marov}@rafael.co.il Abstract—IPv6 is the future network layer protocol for A tunnel in which the end points’ routing tables need the Internet. Since it is not compatible with its prede- to be explicitly configured is called a configured tunnel. cessor, some interoperability mechanisms were designed. Tunnels of this type do not scale well, since every end An important category of these mechanisms is automatic tunnels, which enable IPv6 communication over an IPv4 point must be reconfigured as peers join or leave the tun- network without prior configuration. This category includes nel. To alleviate this scalability problem, another type of ISATAP, 6to4 and Teredo. We present a novel class of tunnels was introduced – automatic tunnels. In automatic attacks that exploit vulnerabilities in these tunnels. These tunnels the egress entity’s IPv4 address is computationally attacks take advantage of inconsistencies between a tunnel’s derived from the destination IPv6 address. This feature overlay IPv6 routing state and the native IPv6 routing state. The attacks form routing loops which can be abused as a eliminates the need to keep an explicit routing table at vehicle for traffic amplification to facilitate DoS attacks. the tunnel’s end points. In particular, the end points do We exhibit five attacks of this class. One of the presented not have to be updated as peers join and leave the tunnel. attacks can DoS a Teredo server using a single packet. The In fact, the end points of an automatic tunnel do not exploited vulnerabilities are embedded in the design of the know which other end points are currently part of the tunnels; hence any implementation of these tunnels may be vulnerable.
    [Show full text]
  • Problems of Ipsec in Combination with NAT and Their Solutions
    Problems of IPsec in Combination with NAT and Their Solutions Alexander Heinlein Abstract As the Internet becomes more and more a part of our daily life it also evolves as an at- tractive target for security attacks, often countered by Internet Protocol Security (IPsec) to establish virtual private networks (VPNs), if secure data communication is a primary objective. Then again, to provide Internet access for hosts inside Local Area Networks, a public IP address shared among all peers is often used, achieved by Network Address Translation (NAT) deployment. IPsec, however, is incompatible with NAT, leading to a variety of problems when using both in combination. Connection establishments origi- nating from the outside are blocked and NAT, as it modifies the outer IP header, breaks IPsec’s security mechanisms. In the following we analyze problems of NAT in combination with IPsec and multiple approaches to solve them. 1 Introduction The current TCP/IP protocols originate from a time where security was not a great concern. As the traditional Internet Protocol (IP) does not provide any guarantees on delivery, the receiver cannot detect whether the sender is the same one as recorded in the protocol header or if the packet was modified during transport. Moreover an attacker may also easily replay IP packets or read sensitive information out of them. In contrast, today, as the Internet becomes more and more a part of our everyday life, a more security aware protocol is needed. To fill this gap the Internet Engineering Task Force (IETF) worked on a new standard for securing IP, called Internet Protocol Security (IPsec).
    [Show full text]
  • Hybrid ATA with FXS and FXO Ports
    Hybrid ATA with FXS and FXO ports HT813 The HT813 is an analog telephone adapter that features 1 analog telephone FXS port and 1 PSTN line FXO port in order to offer backup lifeline support using a PSTN line. The integration of a FXO and FXS port enables this hybrid ATA to support remote calling to and from the PSTN line. For added flexibility, the FXS port extends VoIP service to one analog device. Users can convert their analog technology to VoIP thanks to the HT813’s ultra-compact size, HD voice quality, advanced VoIP functionality, high-end security protection and multiple auto provisioning options. These advanced features also allow service providers to offer high quality IP service to customers looking to upgrade to VoIP. Supports 2 SIP Dual 100Mbps LAN Lifeline support (FXS 3-way voice profiles through 1 and WAN ports port will be hard- conferencing per FXS port and 1 FXO relayed to FXO port) port port in case of power outage Automated & secure Supports T.38 Fax Failover SIP server Strong AES encryption provisioning options for reliable Fax- automatically with security using TR069 over-IP switches to certificate per unit secondary server if main server loses connection www.grandstream.com Telephone Interfaces One (1) RJ11 FXS port, One (1) RJ11 FXO PSTN line port with lifeline support Network Interface Two (2) 10/100Mbps ports (RJ45) with integrated NAT router LED Indicators POWER, LAN, WAN, FXS, FXO Factory Reset Button Yes Voice, Fax, Modem Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
    [Show full text]
  • NAT Tutorial
    NAT Tutorial Dan Wing, [email protected] IETF77, Anaheim March 21, 2010 V2.1 1 Agenda • NAT and NAPT – Types of NATs • Application Impact – Application Layer Gateway (ALG) – STUN, ICE, TURN • Large-Scale NATs (LSN, CGN, SP NAT) • IPv6/IPv4 Translation (“NAT64”) • NAT66 2 Agenda • NAT and NAPT – Types of NATs • Application Impact – Application Layer Gateway (ALG) – STUN, ICE, TURN • Large-Scale NATs (LSN, CGN, SP NAT) • IPv6/IPv4 Translation (“NAT64”) • NAT66 3 NAT • First described in 1991 • 1:1 translation – Does not conserve IPv4 addresses • Per-flow stateless • Today’s primary use is inside of enterprise networks – Connect overlapping RFC1918 address space draft-tsuchiya-addrtrans-00 4 NAT Diagram • Hosts seem to have multiple IPv4 addresses – almost like “ghosts” 192.168.0.2 10.1.1.2 192.168.0.1 10.1.1.1 192.168.0.3 10.1.1.3 5 NAPT • Described in 2001 (RFC3022) • 1:N translation – Conserves IPv4 addresses – Allows multiple hosts to share one IPv4 address – Only TCP, UDP, and ICMP – Connection has to be initiated from ‘inside’ • Per-flow stateful • Commonly used in home gateways and enterprise NAT 6 NAPT Diagram • Hosts share an IPv4 address 192.168.0.2 157.55.0.1 Internet 192.168.0.3 192.168.0.1 7 NAPT complications • NAPT requires connections initiated from ‘inside’ • Creates state in the network (in the NAPT) – This is bad – NAPT crashes -> connections break • When to discard state? – TCP RST? Spoofed RSTs? – Timeout? 8 Terminology • “NAT” is spoken/written instead of “NAPT” – Even though NAPT is often more accurate – The more accurate
    [Show full text]
  • Guidelines for the Secure Deployment of Ipv6
    Special Publication 800-119 Guidelines for the Secure Deployment of IPv6 Recommendations of the National Institute of Standards and Technology Sheila Frankel Richard Graveman John Pearce Mark Rooks NIST Special Publication 800-119 Guidelines for the Secure Deployment of IPv6 Recommendations of the National Institute of Standards and Technology Sheila Frankel Richard Graveman John Pearce Mark Rooks C O M P U T E R S E C U R I T Y Computer Security Division Information Technology Laboratory National Institute of Standards and Technology Gaithersburg, MD 20899-8930 December 2010 U.S. Department of Commerce Gary Locke, Secretary National Institute of Standards and Technology Dr. Patrick D. Gallagher, Director GUIDELINES FOR THE SECURE DEPLOYMENT OF IPV6 Reports on Computer Systems Technology The Information Technology Laboratory (ITL) at the National Institute of Standards and Technology (NIST) promotes the U.S. economy and public welfare by providing technical leadership for the nation’s measurement and standards infrastructure. ITL develops tests, test methods, reference data, proof of concept implementations, and technical analysis to advance the development and productive use of information technology. ITL’s responsibilities include the development of technical, physical, administrative, and management standards and guidelines for the cost-effective security and privacy of sensitive unclassified information in Federal computer systems. This Special Publication 800-series reports on ITL’s research, guidance, and outreach efforts in computer security and its collaborative activities with industry, government, and academic organizations. National Institute of Standards and Technology Special Publication 800-119 Natl. Inst. Stand. Technol. Spec. Publ. 800-119, 188 pages (Dec. 2010) Certain commercial entities, equipment, or materials may be identified in this document in order to describe an experimental procedure or concept adequately.
    [Show full text]
  • Datagram Transport Layer Security Dtls Protocol
    Datagram Transport Layer Security Dtls Protocol Lipless Arie expertised bootlessly. Kermit still hilltop bulgingly while Cesarean Silvain mutualising that serigrapher. Which Patsy homologating so wrongly that Stefano carcasing her Morley? Display real time to the connection close messages back its communications security layer datagram transport dtls protocol is located somewhere After sending state alive at all connections except you enable smart, it must not recommend contacting your. Ipsec can defend against almost has with transport layer datagram transports. Cbc ciphers must not apply settings, dtls with unlimited data packets. All local network layer transport receiver responds to allocate state. Please enter a transport datagram layer security protocol deadlocks could derive from. Dtls protocol secured with ssl certificate errors, also supported extensions, through reference to. Both against denial of sequence number to syslog over time taken by maintaining a different ip office of service to use with saying that your tunnel? Tls features of using ssl protocol to find commands shown when replay. Dtls payload in another thread, and hacking just slightly different os sockets interface mtu that works and provisioning processes, each of output generated. Registration flag for dtls protocol identifier, but it can be taken to. Ssl protocol needs to facilitate certification authority can present certificate checks udp protocols. Tls will cause connection state machine translated for dtls api and servers including ehs headset and may treat receipt; login attempts and authorization server. This attack is datagram layer datagram transport security dtls protocol to attack. Can improve your site may be found or esp payload of the next generation must be used, transferring this service provision information, will detail the.
    [Show full text]
  • HT801/HT802 Analog Telephone Adaptors Administration Guide
    Grandstream Networks, Inc. HT801/HT802 Analog Telephone Adaptors Administration Guide COPYRIGHT ©2021 Grandstream Networks, Inc. http://www.grandstream.com All rights reserved. Information in this document is subject to change without notice. Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. The latest electronic version of this user manual is available for download here: http://www.grandstream.com/support Grandstream is a registered trademark and Grandstream logo is trademark of Grandstream Networks, Inc. in the United States, Europe and other countries. CAUTION Changes or modifications to this product not expressly approved by Grandstream, or operation of this product in any way other than as detailed by this User Manual, could void your manufacturer warranty. WARNING Please do not use a different power adaptor with your devices as it may cause damage to the products and -void the manufacturer warranty. P a g e | 1 HT801/HT802 Administration Guide Version 1.0.29.8 GNU GPL INFORMATION HT801/HT802 firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact terms and conditions of the license. Grandstream GNU GPL related source code can be downloaded from Grandstream web site from: http://www.grandstream.com/support/faq/gnu-general-public-license/gnu-gpl-information-download P a g e | 2 HT801/HT802 Administration Guide Version 1.0.29.8 Table of Content DOCUMENT PURPOSE ................................................................................................
    [Show full text]
  • TR-069 CPE WAN Management Protocol V1.1
    TECHNICAL REPORT TR-069 CPE WAN Management Protocol v1.1 Version: Issue 1 Amendment 2 Version Date: December 2007 © 2007 The Broadband Forum. All rights reserved. CPE WAN Management Protocol v1.1 TR-069 Issue 1 Amendment 2 Notice The Broadband Forum is a non-profit corporation organized to create guidelines for broadband network system development and deployment. This Technical Report has been approved by members of the Forum. This document is not binding on the Broadband Forum, any of its members, or any developer or service provider. This document is subject to change, but only with approval of members of the Forum. This document is provided "as is," with all faults. Any person holding a copyright in this document, or any portion thereof, disclaims to the fullest extent permitted by law any representation or warranty, express or implied, including, but not limited to, (a) any warranty of merchantability, fitness for a particular purpose, non-infringement, or title; (b) any warranty that the contents of the document are suitable for any purpose, even if that purpose is known to the copyright holder; (c) any warranty that the implementation of the contents of the documentation will not infringe any third party patents, copyrights, trademarks or other rights. This publication may incorporate intellectual property. The Broadband Forum encourages but does not require declaration of such intellectual property. For a list of declarations made by Broadband Forum member companies, please see www.broadband-forum.org. December 2007 © The Broadband
    [Show full text]
  • IP Intercom User Manual
    IP Intercom User Manual Single button Dual button 1 / 50 Safety Notices 1. Please use the specified power adapter. If special circumstances need to use the power adapter provided by other manufacturers, please make sure the voltage and current provided in accordance with the requirements of this product, meanwhile, please use the safety certificated products, otherwise may cause fire or get an electric shock. 2. When using this product, please do not damage the power cord, or forcefully twist it、Stretch pull or banding, and not to be under heavy pressure or between items, Otherwise may cause the power cord damage, thus lead to fire or get an electric shock. 3. Before use, please confirm the temperature and environment humidity suitable for the product work. (Move the product from air conditioning room to natural temperature, which may cause this product surface or internal components produce condense water vapor, please open power use it after waiting for this product is natural drying). 4. Non-technical staff not remove or repair, improper repair or may cause electric shock, fire or malfunction, etc，Which can lead to injury accident, and also can cause your product damage. 5. Do not use fingers, pins, wire and other metal objects, foreign body into the vents and gaps. It may cause current through the metal or foreign body, which even cause electric shock and injury accident. If any foreign body or objection falls into the product please stop usage. 6. Please do not discard the packing bags or stored in places where children could reach, if children trap his head with it, may cause nose and mouth blocked, and even lead to suffocation.
    [Show full text]
  • Certified Webrtc Integrator (CWI™) Program
    Certified WebRTC Integrator (CWI™) program Overview The WebRTC School™ is ‘the’ place to learn all about WebRTC, also known as Web Real-Time- Communications. There is so much information on the internet about WebRTC that is hard to read, poorly presented and also lacking in detail, making it difficult for people to learn about this most important specification. So the WebRTC School™ with its lively, clear and fully animated eLearning program has become the best place to enroll to learn about WebRTC. Who would benefit from the Certified WebRTC Integrator (CWI™) program? People who need to understand the underlying infrastructure that helps to make the WebRTC ‘magic’ happen. Covering protocols, media flows, signaling, NAT traversal techniques and security plus various use case scenarios this program can be taken as a standalone course or used to complement the Certified WebRTC Developer (CWD™) program. What’s in the Certified WebRTC Integrator (CWI™) program? Once you’ve enrolled, you’ll see 10 modules. You can work through the modules in order or simply choose the ones you are most interested in. The modules are listed here but for more detail, please look further into this document. 1. Introduction to WebRTC 2. Media Flows in WebRTC 3. WebRTC Protocols 4. IETF WebRTC Standards effort 5. WebRTC Media Stack 6. Signaling 7. WebRTC NAT Traversal 8. Security 9. WebRTC ‘Use Cases’ 10. Status of WebRTC and ‘What’s next’ How long will it take to work through? Total Running time for this program is approximately 3 hours from the start to finish though the time will vary based on the student’s own experience and of course, how much time they want to spend on the material and if they want to replay some modules.
    [Show full text]
  • [MS-TURN]: Traversal Using Relay NAT (TURN) Extensions
    [MS-TURN]: Traversal Using Relay NAT (TURN) Extensions Intellectual Property Rights Notice for Open Specifications Documentation . Technical Documentation. Microsoft publishes Open Specifications documentation (“this documentation”) for protocols, file formats, data portability, computer languages, and standards support. Additionally, overview documents cover inter-protocol relationships and interactions. Copyrights. This documentation is covered by Microsoft copyrights. Regardless of any other terms that are contained in the terms of use for the Microsoft website that hosts this documentation, you can make copies of it in order to develop implementations of the technologies that are described in this documentation and can distribute portions of it in your implementations that use these technologies or in your documentation as necessary to properly document the implementation. You can also distribute in your implementation, with or without modification, any schemas, IDLs, or code samples that are included in the documentation. This permission also applies to any documents that are referenced in the Open Specifications documentation. No Trade Secrets. Microsoft does not claim any trade secret rights in this documentation. Patents. Microsoft has patents that might cover your implementations of the technologies described in the Open Specifications documentation. Neither this notice nor Microsoft's delivery of this documentation grants any licenses under those patents or any other Microsoft patents. However, a given Open Specifications document might be covered by the Microsoft Open Specifications Promise or the Microsoft Community Promise. If you would prefer a written license, or if the technologies described in this documentation are not covered by the Open Specifications Promise or Community Promise, as applicable, patent licenses are available by contacting [email protected].
    [Show full text]